FCC ID: K6630673X3D 25 Watt VHF/FM Marine Transceiver

 

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D Owners Manual MATRIX NMEA2000 GPS GX2400GPS GX2400GPS/E (European Version)

International ITU-R M.493-15 Class D DSC (Digital Selective Calling)

Second Station Remote Microphone*

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D TABLE OF CONTENTS QUICK REFERENCE ........................................... 2 1 GENERAL INFORMATION ............................ 3 2 PACKING LIST ............................................... 4 3 OPTIONAL ACCESSORIES .......................... 4 4 ONLINE WARRANTY REGISTRATION ......... 4 5 Safety Precautions (Be Sure to Read) ........ 5 6 GETTING STARTED ...................................... 7 6.1 ABOUT VHF RADIO ................................................................... 7 6.2 SELECTING AN ANTENNA ....................................................... 7 6.3 COAXIAL CABLE ........................................................................ 7 6.4 DISTRESS AND HAILING (CHANNEL 16) ............................... 8 6.5 CALLING ANOTHER VESSEL (CHANNEL 16 OR 9) ............. 9 6.6 WHAT IS THE RANGE FOR AIS RECEIVERS? .................... 10 6.7 Accuracy of COG ....................................................................... 10 7 CONTROLS AND INDICATORS .................. 11 7.1 FRONT PANEL .......................................................................... 11 7.2 MICROPHONE .......................................................................... 13 7.3 REAR PANEL ............................................................................ 14 INSTALLATION ............................................ 16 8.1 SAFETY / WARNING INFORMATION .................................... 16 8.2 LOCATION ................................................................................. 16 8.3 MOUNTING THE RADIO ......................................................... 16 8.3.1 Supplied Mounting Bracket ...................................... 16 8.3.2 Optional MMB-84 Flush Mount Bracket ................... 17 8.4 ELECTRICAL CONNECTIONS ............................................... 18 8.5 CONNECTION OF EXTERNAL DEVICES TO THE RADIO ... 19 8.5.1 Connecting the NMEA 0183/NMEA 0183-HS to the Radio ... 19 8.5.2 Accessory Cables .................................................... 19 8.5.3 Internal GPS (DSC Output) to Chart Plotter ............ 20 8.5.4 Connection to External GPS or Chart Plotter .......... 20 8.5.5 Connection to External PA/HAIL Speaker ............... 21 8.5.6 Connecting optional SCU-38 External GPS Antenna ... 21 8.5.7 Connecting optional SCU-31 External GPS Antenna ... 21 8.5.8 Optional SSM-70H (RAM4) Microphone ................. 22 8.5.9 Optional SCU-30 Wireless Access Point Installation ... 24 8 8.6 INITIAL SETUP REQUIRED WHEN TURNING ON THE POWER FOR THE FIRST TIME ... 24 8.6.1 Maritime Mobile Service Identity (MMSI) ................. 24 8.7 CONFIRMING GPS SIGNAL (GPS STATUS DISPLAY) ....... 26 8.8 GPS CONFIGURATION ........................................................... 27 8.8.1 Setting the GPS Time .............................................. 27 8.8.2 Setting the Time Area .............................................. 27 8.8.3 Setting the Time Format .......................................... 28 8.8.4 Setting COG to True or Magnetic ............................ 28 9 BASIC OPERATION ..................................... 29 9.1 TURNING THE TRANSCEIVER ON AND OFF ..................... 29 9.2 RECEPTION .............................................................................. 29 9.3 TRANSMISSION ....................................................................... 29 9.3.1 Transmit Power ........................................................ 30 9.4 BASIC OPERATION OF THE SETUP MENU ........................ 30 9.5 TRANSMIT TIME-OUT TIMER (TOT) ..................................... 31 9.6 SIMPLEX/DUPLEX CHANNEL USE ....................................... 31 9.7 CHANNEL GROUP ................................................................... 31 9.8 NOAA WEATHER CHANNELS (in USA and Canada only) ... 32 9.8.1 NOAA Weather Alert (USA version only) ................. 32 9.8.2 NOAA Weather Alert Testing .................................... 33 9.9 MULTI WATCH (TO PRIORITY CHANNEL) ........................... 33 9.9.1 Setup the Multi Watch Operation ............................. 33 9.9.2 Starting Dual Watch ................................................. 33 9.10 SCANNING ............................................................................. 34 9.10.1 Selecting Scan Type ............................................. 34 9.10.2 Programming Scan Memory ................................. 34 9.10.3 Memory Scanning (M-SCAN) ............................... 35 9.10.4 Priority Scanning (P-SCAN) .................................. 35 11.4 9.14 9.15 9.11 PRESET CHANNELS: INSTANT ACCESS ......................... 36 9.11.1 Programming ........................................................ 36 9.11.2 Operation .............................................................. 36 9.11.3 Deletion ................................................................. 37 9.12 MOB OPERATION ................................................................. 37 9.13 PA/FOG OPERATION ........................................................... 38 9.13.1 Operating the PA HAIL mode ................................ 38 9.13.2 Operating the FOG HORN mode .......................... 39 9.13.3 Fog Signal Timing Chart ....................................... 39 INTERCOM OPERATION ..................................................... 40 9.14.1 Communication ..................................................... 40 9.14.2 Calling ................................................................... 41 INTERCOM OPERATION ..................................................... 41 9.15.1 Communication ..................................................... 41 9.15.2 Calling ................................................................... 42 9.16 VOICE SCRAMBLER ............................................................ 42 9.17 DEMO MODE ......................................................................... 42 10 GPS OPERATION ........................................ 44 10.1 DISPLAYING POSITION INFORMATION ........................... 44 10.1.1 GPS Information Numerical Display ..................... 44 10.1.2 GPS Information Compass Display ...................... 44 10.2 CHECKING GPS STATUS .................................................... 44 10.3 GPS LOGGER OPERATION ................................................ 45 11 DIGITAL SELECTIVE CALLING (DSC) ....... 46 11.1 GENERAL ............................................................................... 46 11.2 DISTRESS ALERT ................................................................. 46 11.2.1 Transmitting a Distress Alert ................................. 46 11.2.2 Receiving a Distress Alert ..................................... 49 11.3 ALL SHIPS CALL ................................................................... 50 11.3.1 Transmitting an All Ships Call ............................... 50 11.3.2 Receiving an All Ships Call ................................... 51 INDIVIDUAL CALL ................................................................. 52 11.4.1 Setting up the Individual / Position Call Directory ... 52 11.4.2 Setting up the Individual Call Reply ...................... 53 11.4.3 Enabling the Individual Call Acknowledgment ...... 54 11.4.4 Transmitting an Individual Call .............................. 54 11.4.5 Receiving an Individual Call .................................. 56 11.4.6 Setting up the Individual Call Ringer ..................... 57 11.5 GROUP CALL ........................................................................ 58 11.5.1 Setting up a Group Call ......................................... 58 11.5.2 Transmitting a Group Call ..................................... 60 11.5.3 Receiving a Group Call ......................................... 61 11.5.4 Setting up the Group Call Ringer .......................... 62 11.6 POSITION REQUEST ........................................................... 62 11.6.1 Setting up a Position Request Reply ................... 63 11.6.2 Transmitting a Position Request to Another Vessel ... 63 11.6.3 Receiving a Position Request ............................... 65 11.6.4 Manual Input of Position Information .................... 65 11.6.5 Setting up a Position Request Ringer ................... 66 11.7 POSITION REPORT .............................................................. 66 11.7.1 Transmitting a DSC Position Report Call .............. 66 11.7.2 Receiving a DSC Position Report Call .................. 68 11.7.3 Navigating to the Reported Position ..................... 68 11.7.4 Saving the Reported Position as a Waypoint ........ 69 11.7.5 Setting up a Position Report Ringer ...................... 69 11.8 AUTO POSITION POLLING ................................................. 70 11.8.1 Setting up the Polling Operation ........................... 70 11.8.2 Setting up the Polling Time Interval ...................... 70 11.8.3 Selecting Vessels to be Automatically Polled ........ 70 11.8.4 Enabling/Disabling Auto POS Polling .................... 71 11.9 DSC TEST .............................................................................. 71 11.9.1 Programming MMSI into Individual Directory ........ 71 11.9.2 Transmitting a DSC Test to Another Vessel .......... 72 11.9.3 Receiving a DSC Test Call .................................... 73 11.10 DSC LOG OPERATION ........................................................ 73 11.10.1 Reviewing and Resending a Transmitted Logged Call ... 73 11.10.2 Reviewing a Logged DSC RX Distress Alert and acknowledgement ... 74 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D TABLE OF CONTENTS 11.10.3 Reviewing Other Logged Calls ............................ 74 11.10.4 Deleting Logged Calls from the DSC Log Directory ... 75 11.11 DSC LOOP BACK OPERATION .......................................... 75 12 NAVIGATION ................................................ 76 12.1 WAYPOINT OPERATION ...................................................... 76 12.1.1 Starting and Stopping Navigation ......................... 76 12.1.2 Setting Up Waypoint Directory .............................. 77 12.1.3 Selecting the Display Range ................................. 79 12.1.4 Selecting the Arrival Range ................................... 79 12.2 ROUTING OPERATION ........................................................ 80 12.2.1 Setting Up Routing Directory ................................ 80 12.2.2 Starting and Stopping Route Navigation ............... 82 12.2.3 Changing the Destination ...................................... 82 12.2.4 Selecting Automatic or Manual Routing ................ 82 13 GM OPERATION .......................................... 83 13.1 SETTING UP GM OPERATION ........................................... 83 13.1.1 Setting Up GM Group Directory ............................ 83 13.1.2 Setting Up the Polling Time Interval ...................... 84 13.1.3 Enabling/Disabling Transmission during GM Operation ....... 84 13.2 STARTING GM OPERATION ............................................... 85 13.2.1 Changing the GM Group Being Monitored ............ 85 13.2.2 Transmitting a DSC Call to a Group Member ....... 86 13.2.3 Starting Navigation to a Group Member ............... 86 14 AUTOMATIC IDENTIFICATION SYSTEM (AIS) .... 87 14.1 GENERAL ............................................................................... 87 14.2 AIS OPERATION .................................................................... 87 14.2.1 Displaying the AIS Target Information Screen ...... 88 14.2.2 Changing the AIS Range ...................................... 89 14.2.3 Transmitting an Individual Call to an AIS Ship ...... 89 14.2.4 CPA/TCPA Alarm Functions .................................. 90 14.2.5 Changing the Compass Display ............................ 91 14.3 AIS SETUP ............................................................................. 91 14.3.1 CPA ....................................................................... 91 14.3.2 TCPA ..................................................................... 91 14.3.3 CPA/TCPA Alarm .................................................. 92 14.3.4 IGNORE VESSELS .............................................. 92 15 NMEA 2000 SETUP ..................................... 94 15.1 SELECT DEVICE ................................................................... 94 15.2 DEVICE NUMBER ................................................................. 94 15.3 SYSTEM NUMBER ............................................................... 95 15.4 SUMMARY OF THE NMEA 2000 SETUP ........................... 95 15.5 COMPATIBLE NMEA 2000 PGN LIST ................................. 95 16 CONFIGURATION SETUP ........................... 97 16.1 DISPLAY MODE ..................................................................... 97 16.2 DIMMER ADJUSTMENT ....................................................... 97 16.3 DISPLAY CONTRAST ........................................................... 97 16.4 KEY BEEP .............................................................................. 98 16.5 FOG ALERT TONE FREQUENCY ....................................... 98 16.6 LISTEN BACK ........................................................................ 99 16.7 STATION NAME ..................................................................... 99 16.8 SOFT KEYS .......................................................................... 100 16.8.1 Key Assignment .................................................. 100 16.8.2 Key Timer ............................................................ 102 16.9 RESET .................................................................................. 102 16.9.1 Reset the USER MMSI and ATIS CODE ............ 103 16.10 SUMMARY OF THE CONFIGURATION SETUP .............. 105 17 CHANNEL FUNCTION SETUP .................. 106 17.1 CHANNEL GROUP .............................................................. 106 17.2 WEATHER ALERT (USA version only) ............................... 106 17.3 SCAN MEMORY .................................................................. 106 17.4 SCAN TYPE ......................................................................... 106 17.5 SCAN RESUME ................................................................... 106 17.6 MULTI WATCH ..................................................................... 106 17.7 PRIORITY CHANNEL .......................................................... 107 17.8 SUB CHANNEL .................................................................... 107 17.9 CHANNEL NAME ................................................................. 107 17.10 RX LED DIMMER ADJUSTMENT ...................................... 108 17.11 NOISE CANCELLATION ..................................................... 108 17.12 AUDIO FILTER OPERATION .............................................. 109 17.13 SCRAMBLER SETUP ......................................................... 109 17.14 SUMMARY OF THE CANNEL FUNCTION SETUP ......... 110 18 DSC SETUP ............................................... 111 INDIVIDUAL DIRECTORY ................................................... 111 18.1 INDIVIDUAL REPLY .............................................................. 111 18.2 INDIVIDUAL ACKNOWLEDGMENT ................................... 111 18.3 18.4 INDIVIDUAL RINGER ........................................................... 111 18.5 GROUP DIRECTORY .......................................................... 111 18.6 POSITION REPLY ............................................................... 112 18.7 AUTO POSITION POLLING ............................................... 112 18.8 AUTO POSITION INTERVAL .............................................. 112 18.9 AUTO CHANNEL CHANGE ................................................ 112 18.10 NO ACTION TIMER ............................................................. 113 18.11 WAIT TIME FOR POSITION FIX ........................................ 113 18.12 DSC BEEP ............................................................................ 113 18.13 SUMMARY OF THE DSC SETUP MENU ......................... 114 19 GPS SETUP ............................................... 115 19.1 ORDER OF PRIORITY ........................................................ 115 19.2 COMPASS DIRECTION ...................................................... 115 19.3 LOCATION FORMAT ........................................................... 115 19.4 TIME OFFSET ...................................................................... 116 19.5 TIME AREA ........................................................................... 116 19.6 TIME FORMAT ..................................................................... 116 19.7 UNITS OF MEASURE ......................................................... 116 19.8 MAGNETIC VARIATION ...................................................... 116 19.9 NMEA 0183 IN/OUT ............................................................. 117 19.9.1 Data Speed ......................................................... 117 19.9.2 Output Sentences ............................................... 117 19.10 INTERNAL GPS UNIT ......................................................... 118 19.10.1 Position Data Output ......................................... 118 19.10.2 Pinning .............................................................. 119 19.10.3 Differential GPS ................................................ 119 19.10.4 Logger Interval .................................................. 120 19.10.5 Log Erase .......................................................... 120 19.11 SUMMARY OF THE GPS SETUP ..................................... 121 20 ATIS SETUP ............................................... 122 20.1 ATIS CODE PROGRAMMING ............................................ 122 20.2 ATIS CH GROUP ................................................................. 123 21 SSM-70H (RAM4) REMOTE MIC OPERATION ... 124 21.1 REMOTE MIC CONTROLS ................................................ 124 21.2 RAM4 SOFT KEY ASSIGNMENT ...................................... 126 21.2.1 Key Assignment .................................................. 127 22 CONNECTING A USB DATA TERMINAL TO THE PC ... 128 23 MAINTENANCE ......................................... 129 23.1 REPLACEMENT PARTS ..................................................... 129 23.2 FACTORY SERVICE ........................................................... 129 23.3 TROUBLESHOOTING CHART .......................................... 130 24 CHANNEL ASSIGNMENTS ....................... 131 24.1 GX2400GPS ......................................................................... 131 24.2 GX2400GPS/E ..................................................................... 134 25 SPECIFICATIONS ...................................... 136 25.1 DIMENSIONS ....................................................................... 138 26 FCC RADIO LICENSE INFORMATION ..... 139 27 FCC NOTICE .............................................. 140 STANDARD HORIZON Limited Warranty ........142 TEMPLATE for the GX2400 series ...................143 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D QUICK REFERENCE

Rotate the VOL

Rotate the SQL

Rotate the DIAL/

H/L un-squelch the radio. operating channel.

16/S

16/S

16/S channel.

PTT

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 1 GENERAL INFORMATION

GX2400

channels. The GX2400-

The GX2400

GX2400

The GX2400

The GX2400

receiving calls on the voice channels. The GX2400

16/S

WX

GX2400

RAM4 RAM4W*1

RAM4RAM4W

3 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 2 PACKING LIST

Transceiver

T9101648 3 OPTIONAL ACCESSORIES

................................................................... MMB-84

Remote-Access Microphone (RAM4 Microphone)*1 .................... SSM-70H

*1

... SSM-71H

............................................. SCU-30

........... SDD-14

............................ SCU-38

.................................... CT-100

................................................................ MLS-300

................................................... 220SW

................................... 240SW

...................................................................... HC2400 4 ONLINE WARRANTY REGISTRATION

www.standardhorizon.com to register the GX2400 NOTE

4 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 5 Safety Precautions (Be Sure to Read) Be sure to read these important precautions, and use this product safely.

Types and meanings of the marks

DANGER WARNING CAUTION

Types and meanings of symbols

DANGER Do not operate the device when flammable gas is generated.

Do not transmit with this device while carrying or using a medical appliance such as a cardiac pacemaker. When transmitting, use an external antenna and keep as far as possible away from the external antenna.

If thunder and lightning develop nearby when an external antenna is used, immediately turn this transceiver OFF, and disconnect the exter-

nal antenna from it.

Do not touch any liquid leaking from the liquid display with your bare hands.

WARNING Do not power this transceiver with a voltage other than the specified power supply voltage.

Do not make very long transmissions.

Do not disassemble or make any alteration to this product.

Never touch the antenna during transmission.

Do not handle the power plug and connector etc. with wet hands. Also do not plug and un-

plug the power plug with wet hands.

Disconnect the power cord and connection cables before incorporating items sold sepa-

rately or replacing the fuse.

5 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D When smoke or strange odors are emitted from the radio, turn off the power and discon-

nect the power cord from the socket.

Keep the power plug pins and the surround-

ing areas clean at all time.

Never cut the fuse holder off of the DC power cord.

Use only the specified type fuses.

When connecting a DC power cord, be certain the positive and negative polarities are correct.

Do not use DC power cords other than the one enclosed or specified.

Do not bend, twist, pull, heat and modify the power cord and connection cables in an un-

reasonable manner.

Do not pull the cable when plugging and unplug-

ging the power cord and connection cables.

Do not use the device when the power cord and connection cables are damaged, or when the DC power connector cannot be plugged in tightly. Contact Yaesu Amateur Customer Support or

Follow the instructions provided when installing items sold separately and replacing the fuse.

Use only the provided or specified screws.

CAUTION Do not place the transceiver on an unsteady or sloping surface, or in a location with ex-

treme vibration.

Stay as far away from the antenna as possible during transmission.

Do not wipe the case using thinner and ben-

zene etc.

case. Keep this product out of the reach of children.

Do not put heavy objects on top of the power cord and connection cables.

Do not use any products other than the speci-

fied options and accessories.

For safety reasons, switch off the power and pull out the DC power cord connected to the DC power connector when the device is not going to be used for a long period of time.

Do not throw the transceiver, or subject it to strong impact forces.

Keep magnetic cards and videotapes away from the transceiver. The data recorded on cash cards or videotapes

Do not stand on top of the product, and do not place heavy objects on top or insert objects inside it.

6 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 6 GETTING STARTED 6.1 ABOUT VHF RADIO

6.2 SELECTING AN ANTENNA

the additional gain. 3dB 6dB 9dB 6.3 COAXIAL CABLE

construction.

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D

tions. 6.4 DISTRESS AND HAILING (CHANNEL 16)

Mayday Mayday Mayday. This is

Mayday

9. OVER

NOTE The transceiver

11 DIGITAL SELECTIVE CALLING (DSC)

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 6.5 CALLING ANOTHER VESSEL (CHANNEL 16 OR 9)

Use of channel 16 for hailing must be limited to initial contact only. Call-

channel 9

PTT

PTT

PTTgo tooverPTT

call the other vessel.

over

(PTT

out

9 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 6.6 WHAT IS THE RANGE FOR AIS RECEIVERS?

S

NOTE

6.7 Accuracy of COG

Speed range (knots) Accuracy of COG output to user

3 1

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 7 CONTROLS AND INDICATORS

9 BASIC OPERATION 7.1 FRONT PANEL

ON or OFF ON

key DIAL/ENT knob

to select the menu item.

VOL knob (Volume control)

phone volume. SQL knob (Squelch control)

11 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D H/L key

PTT

MENU/SET key

9.4 BASIC OPERATION OF THE SETUP MENU CLEAR key

GPS Antenna

BUSY Indicator LED

DATA jack

NOTE

11.2.1 Transmitting a Distress Alert DISTRESS key

Soft keys

16.8 SOFT KEYS 16/S key

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 7.2 MICROPHONE

PTT

PTT

SSM-70H Microphone or SSM-71H

PTT

SSM-70H Micro-

phone or the SSM-71H

menu items. 16/S key H/L key

PTT

13 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D Microphone

Microphone speaker

microphone.

7.3 REAR PANEL 14 VHF ANT Jack

GPS ANT Connector Connects the optional SCU-38 NMEA 2K Connector

GND Terminal

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D RAM Remote Access Microphone Connector Connects the GX2400 to the SSM-70H (RAM4) Remote Station Microphone or the SCU-30 SSM-71H

(RAM4W21 SSM-70H (RAM4) REMOTE MIC OPERATION EXTERNAL Speaker Connection Cable

See section

3 OPTIONAL ACCESSORIES

PA/HAIL Speaker Connection Cable (Red & Shield)

3 OPTIONAL ACCESSORIES

DC Input Cable

Accessory Connection Cable

8.5.2 Accessory Cables 15 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 8 INSTALLATION 8.1 SAFETY / WARNING INFORMATION

Antenna Installation:

8.2 LOCATION

Transceiver Unit

NOTE

8.3 MOUNTING THE RADIO 8.3.1 Supplied Mounting Bracket

16 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D Desktop Mounting Overhead Mounting 8.3.2 Optional MMB-84 Flush Mount Bracket

GX2400. In

SCU-38

to accommodate the transceiver (at least

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 8.4 ELECTRICAL CONNECTIONS CAUTION Reverse polarity battery connections will damage the radio!

3.

GPS Navigation Receiver Optional MLS-300 External Speaker Optional MLS-300 External Speaker Optional SSM-70H

(RAM4) Remote MIC Optional SCU-38 External GPS Antenna Antenna Water proof Deck Outlet Fuse Red Black Power Source A c c e s s o r y C a b l e s Fuse Replacement

heat up.

E n s u r e t h a t t h e S C U - 3 8 , t h e MLS-300 and the SSM-70H are located at a distance that does not affect the magnetic compass. A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 8.5 CONNECTION OF EXTERNAL DEVICES TO THE RADIO 8.5.1 Connecting the NMEA 0183/NMEA 0183-HS to the Radio External GPS Device Connections (NMEA 0183 4800 baud or NMEA 0183-HS 38400 baud) The GX2400

19.9 NMEA 0183 IN/OUT NMEA Input (GPS Information) The transceiver

NMEA Output (DSC and GPS information)

19.9 NMEA 0183 IN/OUT

8.5.2 Accessory Cables

plotter. CAUTION

ends together.

19 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 8.5.3 Internal GPS (DSC Output) to Chart Plotter Radio Wires Plotter Connection GPS Chart Plotter Yellow: NMEA IN (+) Green: NMEA IN () No Connection No Connection White: NMEA OUT (+) NMEA IN (+) Brown: NMEA OUT () NMEA IN () Blue: NMEA-HS OUT (+) NMEA-HS IN (+) Gray: NMEA-HS OUT () NMEA-HS IN () Wire Color/Description Connection Examples

1

1

2

NOTE

8.5.4 Connection to External GPS or Chart Plotter Radio Wires Plotter Connection GPS Receiver Yellow: NMEA IN (+) NMEA OUT (+) Green: NMEA IN () NMEA OUT () White: NMEA OUT (+) NMEA IN (+) Brown: NMEA OUT () NMEA IN () Blue: NMEA-HS OUT (+) NMEA-HS IN (+) Gray: NMEA-HS OUT () NMEA-HS IN () Wire Color/Description Connection Examples

1

1

1

1

NOTE

To connect with an external device at 38400 baud

19.9 NMEA 0183 IN/OUT

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 8.5.5 Connection to External PA/HAIL Speaker White Shield Red Shield External Speaker PA Speaker (horn) Wire Color/Description

Connection Examples

8.5.6 Connecting optional SCU-38 External GPS Antenna Connect the SCU-38

at the right). NOTESCU-38

8.5.7 Connecting optional SCU-31 External GPS Antenna External GPS Antenna SCU-31 Black

() 2A Fuse Red

(+) 12 V Battery Radio Wires Yellow: NMEA IN(+) Brown Green: NMEA IN() Black NOTE To connect optional SCU-31-

19.9 NMEA 0183 IN/OUT The SCU-31

SCU-31 to the trans-

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 8.5.8 Optional SSM-70H (RAM4) Microphone

SSM-70H (RAM4) Remote Station

SSM-70H microphone and the transceiver. WARNING Do not connect or remove the SSM-70H (RAM4) microphone while the radio is powered ON. This may result in equipment failure.

SSM-70H) to the RAM

SSM-70H Remote Station

CT-100

Ferrite Core Ferrite Core External Speaker Connections to Transceiver to SSM-70H

(RAM4) As close as possible As close as possible Routing Cable or CT-100 Extension Cable CAUTION Caution!: Before cutting the cable, it must be disconnected from the rear panel of the transceiver.

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D

the nut.

Ferrite Core

Cap

WARNING

Connecting an External Speaker to the RAM4 Mic Cable

MLS-300

RAM4RAM4 can drive

RAM4

RAM4

RAM4MENU/

SET

DIAL/ENTCONFIGURA-

TIONSELECT 3. Rotate the DIAL/ENT SPEAKER SELECTSELECT]. 4. Rotate the DIAL/ENTINTERNAL

EXTERNALSELECT

CLEAR

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 8.5.9 Optional SCU-30 Wireless Access Point Installation The GX2400SSM-71H (RAM4W

addition the GX2400 the RAM4W and the GX2400. The optional SCU-30

RAM4WGX2400. WARNING Do not connect or remove the SCU-30 Wireless Access Point while the radio is powered ON. This could result in damage to the equipment. 1. Connect the SCU-30 RAM Connector on the GX2400 rear

NOTERAM4W and GX2400 the RAM4W Instruction Manual. 8.6 INITIAL SETUP REQUIRED WHEN TURNING ON THE POWER FOR THE FIRST TIME 8.6.1 Maritime Mobile Service Identity (MMSI) What is an MMSI?

THIS NUMBER MUST BE PROGRAMMED INTO THE RADIO TO OPERATE DSC FUNCTIONS. How can I obtain an MMSI assignment?

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D WARNING The MMSI can be input only once, be careful not to input the incorrect MMSI number.

16.9.1 Reset the USER MMSI and ATIS CODE Programming the MMSI

MENU/SETMENU

DIAL/ENT MMSI/POS INFOSELECT

BACK

MMSI INPUT

SELECT

SELECT

FINISH

FINISH

OK NOTE

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 8.7 CONFIRMING GPS SIGNAL (GPS STATUS DISPLAY)

GX2400

2K

NOTE

(GPS Status Display mode)

MENU/SETMENU

DIAL/ENTGPS

SELECT 3. Rotate the DIAL/ENTGPS STATUS

ENTER

CLEAR NOTE

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 8.8 GPS CONFIGURATION 8.8.1 Setting the GPS Time

MENU/SET

DIAL/ENTGPS SETUP

SELECT 3. Rotate the DIAL/ENTTIME OFFSET

SELECT

4. Rotate the DIAL/ENT

00:00

ENTER

CLEAR 8.8.2 Setting the Time Area

MENU/SET

DIAL/ENTGPS SETUP

SELECT 3. Rotate the DIAL/ENTTIME AREA

SELECT 4. Rotate the DIAL/ENT UTC

ENTER

LOCAL setting.

CLEAR

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 8.8.3 Setting the Time Format

8.8.4 Setting COG to True or Magnetic

MENU/SET

DIAL/ENTGPS SETUP

SELECT 3. Rotate the DIAL/ENTTIME FORMAT

SELECT 4. Rotate the DIAL/ENT 24hour

ENTER

12hour setting.

CLEAR

MENU/SET

DIAL/ENTGPS SETUP

SELECT 3. Rotate the DIAL/ENT MAGNETIC VARIATIONSELECT 4. Rotate the DIAL/ENTOFFON

ENTER setting.

CLEAR NOTE

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 9 BASIC OPERATION 9.1 TURNING THE TRANSCEIVER ON AND OFF

9.2 RECEPTION 1. Rotate the SQL

VOL-

3. Rotate the SQL

4. Rotate the DIAL/ENT to select the desired

desired listening level. The BUSY

BUSY

9.3 TRANSMISSION

PTT THIS IS AN FCC REQUIREMENT!

TX

phone PTT NOTE

normal voice.

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 9.3.1 Transmit Power

transceiver

HI

H/L-

NOTE

PTT

9.4 BASIC OPERATION OF THE SETUP MENU

transceiver-

MENU/SET mode screen.

DIAL/ENT

SELECT 3. Rotate the DIAL/ENT

SELECT 4. Rotate the DIAL/ENT to select the desired setting. setting.

ENTER

CLEAR

BACK

] DSC SETUPINDIVIDUAL DIRECTORY

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 9.5 TRANSMIT TIME-OUT TIMER (TOT)

PTT

PTT

PTT

9.6 SIMPLEX/DUPLEX CHANNEL USE

VHF MARINE CHANNEL CHART

NOTE NOTE

9.7 CHANNEL GROUP

1.

] CHANNEL SETUP CHANNEL GROUP

DIAL/ENT-

USAINTLCAN*1.

*1

insert sheet.

3. ENTER

CLEAR

24 CHANNEL ASSIGNMENTS-

nels in each mode. 31 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 9.8 NOAA WEATHER CHANNELS (in USA and Canada only)

WX the screen.

WX

WX NOTE

16.8 SOFT KEYS 3. Rotate the DIAL/ENT

CH

WX

9.8.1 NOAA Weather Alert (USA version only)

The GX2400GPS-

17.2 WEATHER ALERT

(USA version only)

OK

YES

NO] to return to the marine channel. NOTE

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 9.8.2 NOAA Weather Alert Testing

9.8.1 NOAA Weather Alert (USA version only)

9.9 MULTI WATCH (TO PRIORITY CHANNEL)

9.9.1 Setup the Multi Watch Operation 1.

] CHANNEL SETUPMULTI WATCH

DIAL/ENT DUAL

TRIPLE 3. ENTER

CLEAR 9.9.2 Starting Dual Watch

SQL

DIAL/ENT

DUAL WATCH

DUAL WATCH

transceiver

DUAL WATCH

TRIPLETRI WATCH

DUAL WATCH]. 33 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D NOTE

17.7 PRIORITY CHAN-

NEL17.8 SUB CHANNEL 9.10 SCANNING The transceiver

9.10.1 Selecting Scan Type 1.

] CHANNEL SETUPSCAN TYPE

DIAL/ENTPRIORITY

ENTER

MEMORY setting.

CLEAR CH1001 CH1001 CH88 CH09 CH88 CH09 CH1078 CH68 CH12 CH1078 CH15 CH68 Priority Channel CH12 CH15 CH1061 CH1018 CH1061 CH1018 CH1022 Memory Scan (M-SCAN) CH1022 Priority Scan (P-SCAN) 9.10.2 Programming Scan Memory 1.

] CHANNEL SETUPSCAN MEMORY

DIAL/ENT

MEM

ON channel.

34 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D

MEMON

CLEAR to radio operation.

MEM

NOTESCAN MEMORY

MEM 9.10.3 Memory Scanning (M-SCAN)

MEMORY 9.10.1 Selecting Scan Type

SQL

SCANMEM SCAN

received.

SCAN16/SCLEAR 9.10.4 Priority Scanning (P-SCAN)

PRIORITY 9.10.1 Selecting Scan Type

SQL

SCAN PRI SCAN

SCAN16/SCLEAR 35 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D NOTE

17.7 PRIORITY CHANNEL 9.11 PRESET CHANNELS: INSTANT ACCESS

PRESETPRESET]

sound.

16.8 SOFT KEYS 9.11.1 Programming 1. Rotate the DIAL/ENT

PRESET

PRESET P-SET

ADD

P-SET appear. 5. Repeat steps 1 through 3 to program the desired

9.11.2 Operation

PRESET

P-SET 3. Rotate the DIAL/ENT channel.

PRESET

P-SET

36 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 9.11.3 Deletion

P-SET 3. Rotate the DIAL/ENT-

PRESETP-SET

DELETE

6. Repeat steps 3 through 5 to delete the undesired

MOB

TO WPT

12 NAVIGATION

POS/TM

Editing a Waypoint

DISTRESS

11.2.1 Transmitting a Distress Alert

QUIT 9.12 MOB OPERATION The GX2400

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 9.13 PA/FOG OPERATION The GX2400

220SW

240SW

GX2400

to the main radio). NOTE

GX2400

Then the GX2400

PA HAIL mode:

PA HAIL

220SW or 240SW

FOG HORN mode:

GX2400

HORN mode:

GX2400 listens

9.13.1 Operating the PA HAIL mode

PA

PTT

PA VOLDIAL/

ENT

ENTER

VOL

CLEAR

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 9.13.2 Operating the FOG HORN mode

UnderwayStopSailTowing

AgroundAnchorHornSiren

FOG HORN 3. Rotate the DIAL/ENT

SELECT]

FOG VOLDIAL/

ENT

ENTER

HORN SIREN

HORN

HORN VOLDIAL/

ENT

ENTER

VOL

CLEAR 9.13.3 Fog Signal Timing Chart TYPE

PATTERN 5s 5s USAGE

5s 5s 5s 5s

seconds.

seconds.

seconds. Listen Back 120s Listen Back 120s Listen Back 120s 2s 5s 1s 1s 2s 5s 1s 1s 2s 2s 2s 2s 5s 1s 1s 1s 5s 1s 1s 1s Listen Back 2s 2s 2s 120s 2s 2s 2s

another ahead.

39 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D TYPE

PATTERN 1s 1s 1s 1s 1s 1s 5s 250ms USAGE Vessel is aground.

Vessel is at anchor. 9.14 INTERCOM OPERATION The optional SSM-70H (RAM4) or SSM-71H (RAM4W) remote station micro-

GX2400 and the SSM-70H (RAM4) or SSM-71H (RAM4W).

SSM-70H (RAM4) or SSM-71H

(RAM4W) Remote Station Microphone to the transceiver. 5s 250ms 5.25s 11s Listen Back 60s Listen Back 60s NOTE 9.14.1 Communication 1.

IC 3. Rotate the DIAL/ENT

SELECT

NOTE SSM-70H (RAM4) or SSM-71H

(RAM4W) is connected to GX2400

ENTER

INTERCOM

SSM-70H (RAM4).

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D

NOTE PTT and RAM4 PTT

PTT

CLEAR 9.14.2 Calling

BELL RAM4 9.15 INTERCOM OPERATION The optional SSM-70H (RAM4) or SSM-71H (RAM4W) remote station micro-

GX2400 and the SSM-70H (RAM4) or SSM-71H (RAM4W). NOTE

SSM-70H (RAM4) or SSM-

71H (RAM4W) Remote Station Microphone to the GX2400. 9.15.1 Communication 1.

] IC

DIAL/ENT

SELECT

NOTESSM-70H (RAM4) is connected to GX2400

ENTER

INTERCOM

SSM-70H (RAM4).

PTT

NOTEPTT and RAM4PTT

41 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D

PTT

CLEAR 9.15.2 Calling

BELL RAM4 9.16 VOICE SCRAMBLER

3. Transmit the voice message. The transmission sent

9.17 DEMO MODE

NOTE NOTE

1.

] ABOUT...DEMO OPERATION

DIAL/ENTDEMO POSITION INPUT

SELECT

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D

SELECT character.

SELECT

FINISH 6. Rotate the DIAL/ENTDEMO START

SELECT

DIAL/ENTSTART

ENTER

STOP NOTE 43 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 10 GPS OPERATION The GX2400

19.1 ORDER OF PRIORITY

10.1 DISPLAYING POSITION INFORMATION 10.1.1 GPS Information Numerical Display 1.

] GPS GPS INFO

CLEAR 10.1.2 GPS Information Compass Display 1.

] GPS COMPASS

CLEAR NOTE

COMP 10.2 CHECKING GPS STATUS 1.

] GPS GPS STATUS

CLEAR 44 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 10.3 GPS LOGGER OPERATION The GX2400

LOGGER

( 19.10.4 Logger Interval). NOTE GX2400

22 CONNECTING A USB DATA TERMINAL TO THE PC Logger operation alert

19.10.5 Log Erase). 45 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 11 DIGITAL SELECTIVE CALLING (DSC) 11.1 GENERAL WARNING This GX2400

nautical miles.

11.2 DISTRESS ALERT The GX2400

11.2.1 Transmitting a Distress Alert NOTE

8.6.1 Maritime Mobile Service Identity

(MMSI)

GX2400 must receive

8.5.2 Accessory Cables 46 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D Basic Operation

DISTRESS

DISTRESS

received.

ment is received.

distress alarm sounds and Channel 16 is automati-

PTT

over

16/SQUIT Transmitting a Distress Alert with Nature of Distress The transceiver

1.

] DSC CALL DIST ALERT MSG

NATURE NATURE OF

3. Rotate the DIAL/ENT

SELECT

DISTRESS

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D Transmitting a Distress Alert by Manually Inputting Location and Time In case the transceiver

1.

] DSC CALL DIST ALERT MSG

POS/TM

SELECT

4. Repeat step 3 to set the position and time.

SELECT-

FINISH

DISTRESS Pausing a Distress Alert

again. The transceiver

TX IN: 02:10

distress alert.

PAUSE

RESUME

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D Canceling a Distress Alert

transceiver

CANCELYES]

OK

FINISH

QUIT 11.2.2 Receiving a Distress Alert

sounds.

3. Rotate the DIAL/ENT the vessel in distress.

ACCEPT NOTE

AUTO CHANNEL CHANGE

PAUSE

QUIT

TO WPT

NOTE 49 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 5. Rotate the DIAL/ENT

SELECT

STOP

NOTE

assistance in the rescue attempt.

11.10.2 Reviewing a Logged DSC RX Distress Alert and acknowledgement 11.3 ALL SHIPS CALL

SAFETYURGENCY

aid or an important meteorological message. This call is the

a distress situation. This call is the same as transmitting

11.3.1 Transmitting an All Ships Call 1.

] DSC CALL ALL SHIPS

DIAL/ENT

SAFETYURGENCY

SELECT

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D

DIAL/ENT

SELECT

MANUAL

YES

QUIT menu.

11.3.2 Receiving an All Ships Call

3. Monitor the requested channel until the all ships voice communication is completed.

ACCEPT

NOTE change to the requested channel.

PAUSE requested channel. NOTE

QUIT

51

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D

QUIT NOTE

11.10.2 Reviewing a Logged DSC RX Distress Alert and acknowledge-

ment 11.4 INDIVIDUAL CALL

GX2400

11.4.1 Setting up the Individual / Position Call Directory

1.

] DSC SETUP INDIVIDUAL DIRECTORY

DIAL/ENT ADD

SELECT 3. Rotate the DIAL/ENTNAME:

SELECT

SELECT

 

 

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D

space in the name.

SELECT

FINISH

DIAL/ENTMMSI:SELECT

SELECT

SELECT

FINISH

DIAL/ENT

SAVEENTER

through 11.

CLEAR 11.4.2 Setting up the Individual Call Reply

caller ID on a cellular phone. 1.

] DSC SETUP INDIVIDUAL REPLY

DIAL/ENT AUTO

ENTER

MANUAL setting.

CLEAR 53 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 11.4.3 Enabling the Individual Call Acknowledgment

ABLEUNABLE

1.

] DSC SETUP INDIVIDUAL ACK.

DIAL/ENT ABLE

ENTER

UNABLE setting.

CLEAR 11.4.4 Transmitting an Individual Call

channel. Individual Call using the Individual/Position Directory 1.

] DSC CALL INDIVIDUAL CALL

DIAL/ENTHISTORY

MEMORYSELECT 3. Rotate the DIAL/ENT

SELECT

DIAL/ENT

SELECT

MANUAL

YES DSC signal.

ringing tone sounds. 54 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D

QUIT

PTT-

Individual Call by Manually Entering an MMSI

1.

] DSC CALL INDIVIDUAL CALL

DIAL/ENTNEW ID

SELECT

SELECT

SELECT

6.

FINISH

DIAL/ENT

SELECT] . To select

MANUAL

YES DSC call.

ringing tone sounds.

QUIT

PTT-

55 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 11.4.5 Receiving an Individual Call

11.4.2 Setting up the Individual Call Reply

Manual reply (Default setting):

sounds.

the individual call.

ACCEPT -

PAUSE-

NOTE

received.

QUIT

NOTE change to radio operation.

ABLE

UNABLE 5. YES

CHG CH

PTT-

QUIT

56 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D Automatic reply:

sounds.

3. Monitor the requested channel until the message is completed.

PTT-

QUIT NOTE

11.10.2 Reviewing a Logged DSC RX Distress Alert and acknowledgement 11.4.6 Setting up the Individual Call Ringer

1.

] DSC SETUP INDIVIDUAL RING

DIAL/ENT ringing time.

ENTER

CLEAR The GX2400 1.

] DSC SETUP DSC BEEP

DIAL/ENT INDIVIDUAL CALLSELECT

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 3. Rotate the DIAL/ENTOFF

ENTER

CLEAR

DIAL/ENT

ON 11.5 GROUP CALL

11.5.1 Setting up a Group Call

Ship MMSI

Ship MMSI Example

Group MMSI

The ITU (International Telecommunication Union) recommends program-

tant step as all radios in the group must contain the same group MMSI in

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 1.

] DSC SETUP GROUP DIRECTORY

DIAL/ENT ADD

SELECT 3. Rotate the DIAL/ENT GP NAME:

SELECT

SELECT

space in the name.

SELECT

FINISH

DIAL/ENTGP MMSI:

SELECT

SELECT

SELECT

FINISH

SAVESELECT

CLEAR 59 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 11.5.2 Transmitting a Group Call Group Call using the Group Directory 1.

] DSC CALL GROUP CALL

DIAL/ENTHISTORY

MEMORYSELECT 3. Rotate the DIAL/ENT

SELECT

DIAL/ENT

SELECT

MANUAL

YES signal.

press the microphone PTT

Group Call by Manually Entering an MMSI

1.

] DSC CALL GROUP CALL

DIAL/ENTNEW ID

SELECT

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 3. Rotate the DIAL/ENT

SELECT

SELECT

FINISH

DIAL/ENT

SELECT

MANUAL

YES signal.

press the microphone PTT

11.5.3 Receiving a Group Call

produce a ringing alarm sound.

ACCEPT

PAUSE-

QUIT

61 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D

press the microphone PTT-

QUIT NOTE

NOTE

11.10.3 Reviewing Other Logged Calls 11.5.4 Setting up the Group Call Ringer

1.

] DSC SETUP DSC BEEP

DIAL/ENTGROUP CALL

SELECT 3. Rotate the DIAL/ENTOFF 4. ENTER

CLEAR

DIAL/ENT

ON 11.6 POSITION REQUEST

GX2400.

chart plotter is connected to the GX2400

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D NOTE

11.4 INDIVIDUAL CALL

11.6.1 Setting up a Position Request Reply

1.

] DSC SETUP POSITION REPLY

DIAL/ENT AUTO

MANUAL

the transceiver

YES

ENTER

CLEAR 11.6.2 Transmitting a Position Request to Another Vessel Position Request using the Individual/Position Directory

11.4 INDIVIDUAL CALL-

1.

] DSC CALL POS REQUEST

DIAL/ENTHISTORY

MEMORYSELECT 3. Rotate the DIAL/ENT

63 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D

SELECTYES]

QUIT NOTE

---.--.---- _ Position Request by Manually Entering an MMSI

ing the MMSI. 1.

] DSC CALL POS REQUEST

DIAL/ENTNEW ID

SELECT

SELECT

SELECT

YES

FINISH request DSC call. 64 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D

QUIT NOTE

11.6.3 Receiving a Position Request

REPLY

QUIT

QUIT

NOTE

11.10.3 Reviewing Other Logged Calls 11.6.4 Manual Input of Position Information

1.

] MMSI/POS INFO

POS/TM 65 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D

SELECT

4. Repeat step 3 to set the position and time.

SELECT-

OK

CLEAR

FINISH 11.6.5 Setting up a Position Request Ringer

1.

] DSC SETUP DSC BEEP

DIAL/ENTPOS REQUEST

SELECT 3. Rotate the DIAL/ENTOFF

ENTER setting.

CLEAR

DIAL/ENT

ON 11.7 POSITION REPORT

11.7.1 Transmitting a DSC Position Report Call DSC Position Report Call using the Individual/Position Directory

11.4 INDIVIDUAL CALL-

] DSC CALL POS REPORT 1.

66 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D

DIAL/ENTHISTORY

MEMORYSELECT 3. Rotate the DIAL/ENT

SELECT

POS/TM

FINISH

YES selected vessel.

QUIT DSC Position Report Call by Manually Entering an MMSI

1.

] DSC CALL POS REPORT

DIAL/ENTNEW ID

SELECT 3. Rotate the DIAL/ENT

SELECT

SELECT

FINISH

POS/TM

FINISH

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D

YES selected vessel.

QUIT 11.7.2 Receiving a DSC Position Report Call

GX2400

QUIT 11.7.3 Navigating to the Reported Position

TO WPT

ENTER

). Stopping Navigation to the Reported Position

STOP

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 11.7.4 Saving the Reported Position as a Waypoint

SAVE

the DIAL/ENTNAME

SELECT

11.4.1 Setting up the Individual / Position Call Directory

ENTER

OK Navigating to a Saved Waypoint

12.1.1 Starting and Stopping Navigation 11.7.5 Setting up a Position Report Ringer

1.

] DSC SETUP DSC BEEP

DIAL/ENTPOS REPORT

SELECT

3. Rotate the DIAL/ENTOFF

ENTER setting.

CLEAR

DIAL/ENT

ON 69 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 11.8 AUTO POSITION POLLING

to the programmed stations. 11.8.1 Setting up the Polling Operation 1.

] DSC SETUP AUTO POSITION POLLING

DIAL/ENT

ENTER

CLEAR 11.8.2 Setting up the Polling Time Interval 1.

] DSC SETUP AUTO POS INTERVAL

DIAL/ENT

ENTER

CLEAR 11.8.3 Selecting Vessels to be Automatically Polled NOTE

11.4.1 Setting up the Individual / Position Call Directory proceeding. 1.

] DSC CALL AUTO POS POLLING

DIAL/ENTSELECTED ID

SELECT

SELECT]

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D

DIAL/ENT

ENTER

DIAL/ENT

SELECT step 4.

CLEAR radio mode. 11.8.4 Enabling/Disabling Auto POS Polling 1.

] DSC CALL AUTO POS POLLING

DIAL/ENTACTIVATION

SELECT 3. Rotate the DIAL/ENT START

STOP

ENTER

CLEAR

11.9 DSC TEST

NOTE

11.9.1 Programming MMSI into Individual Directory

11.4.1 Setting up the Individual / Position Call Directory

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 11.9.2 Transmitting a DSC Test to Another Vessel DSC Test call using the Individual/Position Directory 1.

] DSC CALL DSC TEST CALL

DIAL/ENTHISTORY

MEMORYSELECT 3. Rotate the DIAL/ENT

SELECT

YES to the other vessel.

QUIT DSC Test Call by Manually Entering an MMSI 1.

] DSC CALL DSC TEST CALL MANUAL

DIAL/ENTNEW ID

SELECT 3. Rotate the DIAL/ENT

SELECT

FINISH

YES to the other vessel.

QUIT

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D NOTE

RX TEST CALL called radio has received the test call. 11.9.3 Receiving a DSC Test Call

GX2400

QUIT]

11.10 DSC LOG OPERATION The GX2400

GX2400

NOTE

DSC LOG

11.10.1 Reviewing and Resending a Transmitted Logged Call

1.

] DSC CALL DSC LOG

DIAL/ENT TRANSMIT-

TEDSELECT 3. Rotate the DIAL/ENT

SELECT selected station.

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D

CALL

BACK-

ted DSC call list. 11.10.2 Reviewing a Logged DSC RX Distress Alert and acknowledgement

1.

] DSC CALL DSC LOG RX DISTRESS

DIAL/ENT

NOTE

SELECT selected station.

INFO-

BACK received DSC distress call list. 11.10.3 Reviewing Other Logged Calls 1.

] DSC CALL DSC LOG RX OTHER CALL

DIAL/ENT

NOTE

SELECT selected station.

REPLY

BACK

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 11.10.4 Deleting Logged Calls from the DSC Log Directory 1.

] DSC CALL DSC LOG LOG DELETE

DIAL/ENT

SELECT

Do you want to delete the LOG?

YESNO]

CLEAR NOTE

one time.

DELETE 11.11 DSC LOOP BACK OPERATION The GX2400 1.

] DSC CALL DSC LOOP BACK

YES

NO

OK

CLEAR

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 12 NAVIGATION The GX2400 the compass page.

12.1 WAYPOINT OPERATION 12.1.1 Starting and Stopping Navigation Navigation Using the Waypoint Directory 1.

] NAVI WAYPOINT

DIAL/ENT

HISTORYMEMORY

SELECT 3. Rotate the DIAL/ENT

SELECT

The navigation screen includes the distance and

() inside the compass.

STOP

Navigation by Manually Entering a Waypoint 1.

] NAVI WAYPOINT

DIAL/ENTMANUAL

SELECT

rotate the DIAL/ENTNAME:

SELECT

11.4.1 Setting up the Individual /

Position Call Directory 4. Rotate the DIAL/ENT POSITION:

SELECT

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 5. Rotate the DIAL/ENT

SELECT

6. Repeat step 5 to set the position.

SELECT step 5.

FINISH

DIAL/ENT

SELECT

The screen includes the distance and direction to

() inside the compass.

STOP

12.1.2 Setting Up Waypoint Directory Marking a Position

1.

] WAYPOINT SETUP MARK POSITION

DIAL/ENT

NAME:SELECT

DIAL/ENT

SELECT

FINISH

DIAL/ENT

POSITION:SELECT

FINISH 5. Rotate the DIAL/ENTSAVE

SELECT

CLEAR

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D Adding a Waypoint 1.

] WAYPOINT SETUP WAYPOINT DIRECTORY

DIAL/ENT ADD

SELECT 3. Rotate the DIAL/ENTNAME:

SELECT

SELECT

FINISH 5. Rotate the DIAL/ENTPOSITION:SELECT]

FINISH 6. Rotate the DIAL/ENTSAVE

SELECT

CLEAR Editing a Waypoint 1.

] WAYPOINT SETUP WAYPOINT DIRECTORY

DIAL/ENT EDIT

SELECT 3. Rotate the DIAL/ENT

SELECT

4. Rotate the DIAL/ENT NAME:

POSITION:SELECT

SELECT

FINISH

DIAL/ENT SAVE

SELECT

CLEAR

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D Deleting a Waypoint 1.

] WAYPOINT SETUP WAYPOINT DIRECTORY

DIAL/ENTDELETE

SELECT 3. Rotate the DIAL/ENT

SELECT

DIAL/ENT

OKSELECT

CLEAR Saving a DSC Position Call as a Waypoint

GX2400

11.7.4 Saving the Reported Position as a Waypoint 12.1.3 Selecting the Display Range

1.

] WAYPOINT SETUP DISPLAY RANGE

DIAL/ENT

19.7 UNITS OF MEASURE 3. ENTER

CLEAR 12.1.4 Selecting the Arrival Range

1.

] WAYPOINT SETUP ARRIVAL RANGE

DIAL/ENT

19.7 UNITS OF MEASURE

ENTER

CLEAR

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 12.2 ROUTING OPERATION The GX2400 Via3 Via29 Via2 Current position Via1 Routing to a Waypoint Via30 WPT 12.2.1 Setting Up Routing Directory NOTE

Adding a Route 1.

] WAYPOINT SETUP ROUTE DIRECTORY

DIAL/ENT ADD

SELECT 3. Rotate the DIAL/ENTNAME:

SELECT 4. DIAL/ENT

SELECT

FINISH 5. Rotate the DIAL/ENT ROUTE POINTSSELECT 6. Rotate the DIAL/ENT WPT:

SELECT

DIAL/ENT

SELECT

DIAL/ENT Via 1:

SELECT

9. Rotate the DIAL/ENT

SELECT

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 1.

] WAYPOINT SETUP ROUTE DIRECTORY

BACK

DIAL/ENT SAVE

ENTER

CLEAR Editing a Route

DIAL/ENT EDIT

SELECT 3. Rotate the DIAL/ENT

SELECT

route is updated. 5. Rotate the DIAL/ENT SAVE

SELECT

CLEAR Deleting a Route

DIAL/ENTDELETE

SELECT 3. Rotate the DIAL/ENT

SELECT

DIAL/

ENTOKSELECT]

CLEAR 1.

] WAYPOINT SETUP ROUTE DIRECTORY

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 12.2.2 Starting and Stopping Route Navigation 1.

] NAVI ROUTE

DIAL/ENT

HISTORYMEMORY

SELECT 3. Rotate the DIAL/ENT

SELECT

RTE

ARRIVED

target point is reached.

YES]

STOP

12.2.3 Changing the Destination

NEXT TG

DIAL/ENT

SELECT

appears. 12.2.4 Selecting Automatic or Manual Routing

1.

] WAYPOINT SETUP ROUTING OPERATION

DIAL/ENT AUTO

MANUALENTER

CLEAR

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 13 GM OPERATION

GX2400

locations. 13.1 SETTING UP GM OPERATION

13.1.1 Setting Up GM Group Directory NOTE

11.5.1 Setting up a Group Call

11.4.1 Setting up the Individual / Position Call Directory 1.

] GM SETUP GM GROUP DIRECTORY

DIAL/ENT ADD

SELECT 3. Rotate the DIAL/ENTNAME:

SELECT

DIAL/ENT

SELECT

FINISH 5. Rotate the DIAL/ENTGM ID:

SELECT

FINISH]

6. Rotate the DIAL/ENTMEMBER

SELECT

 

 

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D

DIAL/ENT

SELECT

DIAL/ENT

SELECT

BACK

BACKNAME:

GM ID:

11. Rotate the DIAL/ENTSAVE

ENTER

through 11.

CLEAR 13.1.2 Setting Up the Polling Time Interval 1.

] GM SETUP INTERVAL

DIAL/ENT-

ENTER

CLEAR 13.1.3 Enabling/Disabling Transmission during GM Operation 1.

] GM SETUP GM TX

DIAL/ENT

ENTER

CLEAR

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 13.2 STARTING GM OPERATION NOTE

13.1.1 Setting Up GM Group Directory 1.

] GM

DIAL/ENT

SELECT

appears.

CLEAR 13.2.1 Changing the GM Group Being Monitored

TG LIST

CHG GRP 3. Rotate the DIAL/ENT

SELECT]

CLEAR

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 13.2.2 Transmitting a DSC Call to a Group Member

TG LIST

DIAL/ENT

SELECT

CALL

13.2.3 Starting Navigation to a Group Member

TG LIST 3. Rotate the DIAL/ENT

SELECT

TO WPT

BACK

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 14 AUTOMATIC IDENTIFICATION SYSTEM (AIS) 14.1 GENERAL NOTE The GX2400 transmissions. The GX2400-

Classes of AIS:

(and others in some countries).

The GX2400 the internal Dual Channel AIS receiver. 14.2 AIS OPERATION The GX2400

NOTE

AIS targets. 1.

] AIS

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D

Vessel Location Range Ring AIS Target Selected AIS Target

DIAL/ENT Rotating the DIAL/ENT

DIAL/ENT

NOTE

icon. Information of the AIS Target

CLEAR 14.2.1 Displaying the AIS Target Information Screen

RANGE

TG LIST

received.

FUNC

TG LIST 3. Rotate the DIAL/ENT

SELECT

DANGER

DIAL/

ENTBACK AIS target.

EXIT

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 14.2.2 Changing the AIS Range

RANGE the center and right side to select the radius range to

BACK NOTE

19.7 UNITS OF MEASURE 14.2.3 Transmitting an Individual Call to an AIS Ship

GX2400 to transmit a DSC individual call to a received AIS

TG LIST

3. Rotate the DIAL/ENT

SELECT

CALL

DIAL/ENT

SELECT

MANUAL 6. To transmit an individual DSC call to the select AIS

YES

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D

GX2400

PTT vessel.

QUIT

CLEAR

14.2.4 CPA/TCPA Alarm Functions

14.3.1 CPA

14.3.2 TCPA

NOTE to the AIS mode.

INFO

CALL

calls.

EXIT

14.2.3 Transmitting an Individual Call to an AIS Ship

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 14.2.5 Changing the Compass Display

19.2 COMPASS DIRECTION 14.3 AIS SETUP 14.3.1 CPA

alarm distance.

1.

] AIS SETUP CPA

DIAL/ENT

0.1nm

20nm

ENTER

CLEAR setting. 14.3.2 TCPA

alarm.

1.

] AIS SETUP TCPA

DIAL/ENT

1min60min

ENTER setting.

CLEAR

91 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 14.3.3 CPA/TCPA Alarm

1.

] AIS SETUP CPA/TCPA ALARM

DIAL/ENTCPATCPA

SELECT 3. Rotate the DIAL/ENTOFFON

ENTER setting.

CLEAR NOTE

and optional RAM4 and RAM4W 14.3.4 IGNORE VESSELS

1.

] AIS SETUP CPA/TCPA ALARM

DIAL/ENT IGNORE VESSELSSELECT 3. Rotate the DIAL/ENT ADD

SELECT 4. Rotate the DIAL/ENTNAME:

SELECT

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D

in the ignore vessel.

SELECT

SELECT

FINISH 9. Rotate the DIAL/ENT MMSI:

SELECT

SELECT

entered.

SELECT

FINISH

DIAL/ENT

SAVESELECT

CLEAR

93 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 15 NMEA 2000 SETUP

15.1 SELECT DEVICE

1.

] NMEA2000 SETUP SELECT DEVICE

DIAL/ENT

SELECT

CLEAR NOTE

SEARCH 15.2 DEVICE NUMBER

GX2400

15.1 SELECT DEVICE 1.

] NMEA2000 SETUP DEVICE NUMBER

DIAL/ENT

SELECT

SELECT

FINISH

CLEAR 94 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 15.3 SYSTEM NUMBER

15.1 SELECT DEVICE 1.

] NMEA2000 SETUP SYSTEM NUMBER

SELECT

SELECT

FINISH

CLEAR

15.4 SUMMARY OF THE NMEA 2000 SETUP Item Description Default Value Page

94 94 95 15.5 COMPATIBLE NMEA 2000 PGN LIST Transmit

Receive

Magnetic Variation

Speed

95 Receive

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D

Transmit

Report

Report

Station)

Related Data

Message

Message

96 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 16 CONFIGURATION SETUP 16.1 DISPLAY MODE

the radio. 1.

] CONFIGURATION DISPLAY MODE

DIAL/ENT

DAY MODENIGHT MODE setting.

use.

ENTER

CLEAR 16.2 DIMMER ADJUSTMENT

1.

] CONFIGURATION DIMMER

DIAL/ENT

ENTER

CLEAR 16.3 DISPLAY CONTRAST

1.

] CONFIGURATION CONTRAST

DIAL/ENT

130

ENTER

CLEAR

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 16.4 KEY BEEP

1.

] CONFIGURATION KEY BEEP

DIAL/ENT

17OFF

ENTER

CLEAR 16.5 FOG ALERT TONE FREQUENCY

1.

] CONFIGURATION FOG FREQUENCY

DIAL/ENT

200Hz

850Hz

ENTER setting.

CLEAR NOTE

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 16.6 LISTEN BACK

1.

] CONFIGURATION LISTEN BACK

DIAL/ENTOFFON

ENTER

setting.

CLEAR 16.7 STATION NAME

microphone. 1.

] CONFIGURATION STATION NAME

the DIAL/ENT

SELECT

3. Rotate the DIAL/ENT

SELECT

5. Repeat steps 3 and 4 until the name is complete. The

DIAL/ENT

SELECT

FINISH

DIAL/ENTSSM-70H

SELECT

DIAL/ENT

99 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D

SELECT

space in the name.

DIAL/ENT

SELECT

FINISH

CLEAR 16.8 SOFT KEYS

16.8.1 Key Assignment 1.

] CONFIGURATION SOFT KEY

DIAL/ENTKEY ASSIGN-

MENTSELECT 3. Rotate the DIAL/ENT

SELECT 4. Rotate the DIAL/ENT

ENTER-

CLEAR

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D DISPLAY

SOFT KEY ICON

FUNCTION

scan

Starts and stops logging position data

nighttime mode

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 16.8.2 Key Timer 1.

] CONFIGURATION SOFT KEY

DIAL/ENTKEY TIMER

SELECT 3. Rotate the DIAL/ENT

ENTER

CLEAR

16.9 RESET

1.

] CONFIGURATION RESET

DIAL/ENT-

DSC/GM SETUPWAYPOINT SETUP

CHANNEL SETUPGPS SETUPCONFIGURA-

TIONFACTORY1

USER MMSI

ATIS CODE.

*1

USER MMSIATIS CODE16.9.1 Reset the USER MMSI and ATIS CODE

SELECT

YESNO]

OK

CLEAR

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 16.9.1 Reset the USER MMSI and ATIS CODE

To request the Reset Code

The Information Necessary to obtain the Reset Code:

Model name

8.6.1 Maritime Mobile Service Identity (MMSI)20 ATIS SETUP

Checking the Request code

Contact Information USA/Canada

Europe

Checking the Request code 1.

] CONFIGURATION RESET

DIAL/ENT

USER MMSI

ATIS CODESELECT

3. SELECT

NOTE

are required.

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D Resetting the USER MMSI and ATIS codes

1. Check-

ing the Request code

DIAL/ENTPASSWORD

SELECT

SELECT

SELECT

FINISH

Completed! on the screen.

code again.

OK NOTE

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 16.10 SUMMARY OF THE CONFIGURATION SETUP Default Value Description Item Page

horn

15 4

99 99

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 17 CHANNEL FUNCTION SETUP 17.1 CHANNEL GROUP

9.7 CHANNEL GROUP 17.2 WEATHER ALERT (USA version only)

1.

] CHANNEL SETUP WX ALERT

DIAL/ENTONOFF 3. ENTER

CLEAR 17.3 SCAN MEMORY

9.10.2 Programming Scan Memory 17.4 SCAN TYPE

MEMORY

PRIORITY

9.10.1 Selecting Scan Type 17.5 SCAN RESUME

1.

] CHANNEL SETUP SCAN RESUME

DIAL/ENT

1sec5sec

ENTER

CLEAR 17.6 MULTI WATCH

DUALTRIPLE

9.9 MULTI WATCH (TO PRIORITY CHANNEL)

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 17.7 PRIORITY CHANNEL

1.

] CHANNEL SETUP PRIORITY CHANNEL

DIAL/ENT-

ENTER

CLEAR 17.8 SUB CHANNEL

1.

] CHANNEL SETUP SUB CHANNEL

DIAL/ENT-

ENTER

CLEAR 17.9 CHANNEL NAME

Example 1.

] CHANNEL SETUP CHANNEL NAME

DIAL/ENT

SELECT

SELECT

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D

SELECT

FINISH

CLEAR NOTE

NAME 17.10 RX LED DIMMER ADJUSTMENT

1.

] CHANNEL SETUP RX LED DIMMER

DIAL/ENT

ENTER

CLEAR 17.11 NOISE CANCELLATION

1.

] CHANNEL SETUP NOISE CANCEL

DIAL/ENTTX MODE

SELECT 3. Rotate the DIAL/ENTONOFF

ENTER

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 4. Rotate the DIAL/ENTRX MODE

SELECT 5. Rotate the DIAL/ENT

LEVEL1 LEVEL4 OFF

ENTER

CLEAR 17.12 AUDIO FILTER OPERATION

1.

] CHANNEL SETUP AF PITCH CONTROL

DIAL/ENT operation.

ENTER

CLEAR 17.13 SCRAMBLER SETUP

CVS2500A

(FVP-42 NOTE

1.

] CHANNEL SETUP SCRAMBLER

DIAL/ENT TYPE

SELECT 3. Rotate the DIAL/ENTCVS2500

FVP-42ENTER NOTE

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 4. Rotate the DIAL/ENTCODE

SELECT 5. Rotate the DIAL/ENT

SELECT NOTE

6. Rotate the DIAL/ENT

00

03 OFF

0031

OFFOFF

ENTER

CLEAR 17.14 SUMMARY OF THE CANNEL FUNCTION SETUP Item Description

Selects the channel group Default Value

(Depending on the transceiver version)

Page 31

3 sec

scan

cation settings

34 34

33

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 18 DSC SETUP 18.1 INDIVIDUAL DIRECTORY The GX2400

11.4.1 Setting up the Individual / Position Call Directory

18.2 INDIVIDUAL REPLY

to caller ID on a cellular phone.

11.4.2 Setting up the Individual Call Reply 18.3 INDIVIDUAL ACKNOWLEDGMENT

11.4.3 Enabling the Individual Call Acknowledgment details. 18.4 INDIVIDUAL RINGER

11.4.6 Setting up the Individual Call Ringer 18.5 GROUP DIRECTORY

11.5.1 Setting up a Group Call 111 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 18.6 POSITION REPLY The GX2400

11.6.1 Setting up a Position Request Reply 18.7 AUTO POSITION POLLING The GX2400

11.8 AUTO POSITION POLLING 18.8 AUTO POSITION INTERVAL

11.8.2 Setting up the Polling Time Interval 18.9 AUTO CHANNEL CHANGE

the GX2400

1.

] DSC SETUP AUTO CHANNEL CHANGE

DIAL/ENT

ENTER

CLEAR

OFF screen.

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 18.10 NO ACTION TIMER

1.

] DSC SETUP NO ACTION TIMER

DIAL/ENT

ENTER

CLEAR

18.11 WAIT TIME FOR POSITION FIX

1.

] DSC SETUP POS UNFIX WAITING TIME

DIAL/ENT

ENTER

CLEAR 18.12 DSC BEEP

11.5.4 Setting up the Group Call Ringer 113 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 18.13 SUMMARY OF THE DSC SETUP MENU Description Default Value Page Item

individual call

call

an individual call or a position request is received

group calling

ing a position call

53 54

63

113 113 113

114 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 19 GPS SETUP

19.1 ORDER OF PRIORITY

1.

] GPS SETUP ORDER OF PRIORITY

DIAL/ENTNMEA2000

NMEA-0183 ENTER

CLEAR NOTE

19.2 COMPASS DIRECTION

1.

] GPS SETUP COMPASS DIRECTION

DIAL/ENT

COURSE-UPNORTH-UP

ENTER

CLEAR 19.3 LOCATION FORMAT

1.

] GPS SETUP LOCATION FORMAT

DIAL/ENT-

dddmm.mmmmdddmmss

ENTER

CLEAR 115 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 19.4 TIME OFFSET

8.8.1 Setting the GPS Time 19.5 TIME AREA

8.8.2 Setting the Time Area 19.6 TIME FORMAT

8.8.3 Setting the Time Format 19.7 UNITS OF MEASURE

1.

] GPS SETUP UNIT OF MEASURE

DIAL/ENT set.

SELECT 4. Rotate the DIAL/ENT

ENTER

CLEAR 19.8 MAGNETIC VARIATION

8.8.4 Setting COG to True or Magnetic NOTE

116 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 19.9 NMEA 0183 IN/OUT 19.9.1 Data Speed

1.

] GPS SETUP NMEA 0183 IN/OUT

DIAL/ENTDATA SPEED

SELECT 3. Rotate the DIAL/ENT

4800bps38400bps

ENTER

CLEAR 19.9.2 Output Sentences

1.

] GPS SETUP NMEA 0183 IN/OUT

DIAL/ENT OUTPUT SENTENCESSELECT 3. Rotate the DIAL/ENT

SELECT 4. Rotate the DIAL/ENTONOFF

ENTER 6. Repeat steps 3 through 5 to set the other sentences.

CLEAR

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D NOTE

19.1 ORDER OF PRIORITY

19.10 INTERNAL GPS UNIT

SCU-38

19.10.1 Position Data Output

1.

] GPS SETUP INTERNAL GPS UNIT

DIAL/ENT POS DATA OUTPUTSELECT 3. Rotate the DIAL/ENTNMEA 2000

NMEA 0183SELECT 4. Rotate the DIAL/ENTOFFON

ENTER

CLEAR

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 19.10.2 Pinning

1.

] GPS SETUP INTERNAL GPS UNIT

DIAL/ENTPINNING

SELECT 3. Rotate the DIAL/ENTOFFON

not update its position unless the

ENTER

CLEAR operation. 19.10.3

1.

] GPS SETUP INTERNAL GPS UNIT

DIAL/ENTD-GPS

SELECT 3. Rotate the DIAL/ENTOFFON

ENTER

CLEAR 119 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 19.10.4 Logger Interval 1.

] GPS SETUP OPTION GPS UNIT

DIAL/ENT LOGGER INTERVALSELECT 3. Rotate the DIAL/ENT

ENTER NOTE:

CLEAR 19.10.5 Log Erase 1.

] GPS SETUP OPTION GPS UNIT

DIAL/ENTLOG ERASE

SELECT

YESNO]

OK

CLEAR

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 19.11 SUMMARY OF THE GPS SETUP Item Description Default Value

Selects the compass direction to

Page 115 dddmm.mmmm

altitude

UTC

Selects the connection device

116

nm (nautical mile)

115 115 116 116 116 116

119 119

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 20 ATIS SETUP The GX2400GPS/E

WARNING The ATIS code can be inputted only once, please be careful not to input the incorrect ATIS code.

16.9.1 Reset the USER MMSI and ATIS CODE 20.1 ATIS CODE PROGRAMMING 1.

] ATIS SETUP ATIS CODE

SELECT to th

SELECT]

FINISH

FINISH

OKurn to radio operation.

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 20.2 ATIS CH GROUP The GX2400GPS/E channel group. 1.

] ATIS SETUP ATIS GROUP

DIAL/ENT

SELECT

*(Depending on the region setting.) 3. Rotate the DIAL/ENTONOFF

ENTER

BACK NOTE

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 21 SSM-70H (RAM4) REMOTE MIC OPERATION

GX2400

SSM-70H operation is the same as the GX2400

SSM-70H

SSM-70H

SSM-70H

CT-100. The Intercom

SSM-70H and the GX2400

21.1 REMOTE MIC CONTROLS

Power/VOL knob DIAL/ENT knob

DIAL/ENT

to select the desired menu item.

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D SQL key (Squelch control)

or

PTTswitch

CLEAR/

key

Microphone

NOTE a normal voice.

MENU key

Display

MMSI and ATIS Display Area (Fixed) Channel and Operation status Display area Soft keys

21.2 RAM4 SOFT KEY ASSIGNMENT

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D

Strobe Light

STROBE

16/S key

channel. Speaker

DATA jack

SSM-70H (RAM4 NOTE

DISTRESS key

11 DIGITAL SELECTIVE CALLING (DSC) 21.2 RAM4 SOFT KEY ASSIGNMENT

RAM4

DISPLAY

SOFT KEY ICON

FUNCTION

marine

scan

channel

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D DISPLAY SOFT KEY ICON FUNCTION

Starts and stops logging position data

marine

nighttime mode NOTE

optional SSM-70H (RAM4) remote microphone. 21.2.1 Key Assignment

SSM-70H (RAM4

NOTEDIAL/ENT the SSM-70H (RAM4).

1.

(RAM4)

] CONFIGURATION SOFT KEY

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D

DIAL/ENTKEY ASSIGN-

MENTSELECT 3. Rotate the DIAL/ENT

SELECT 4. Rotate the DIAL/ENT

ENTER]

NONE assignment is removed.

CLEAR/

22 CONNECTING A USB DATA TERMINAL TO THE PC The GX2400

DATAGX2400. supplied USB cable DATA jack CAUTION The DATA

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 23 MAINTENANCE

prevent damage to the transceiver.

connected to the transceiver.

23.1 REPLACEMENT PARTS

DC Power Cord VOL Knob SQL Knob DIAL/ENT Knob Mounting Bracket Mounting Bracket Knob Microphone Hanger SSM-70H (RAM4 Microphone) Routing Cable Assembly USB Cable 23.2 FACTORY SERVICE

In USA and Canada Attention Marine Repair Department

Telephone () 366-4566 Standard Horizon Yaesu (UK) Ltd In Europe

Telephone () In Other Countries

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D REMEDY

to turn the radio on.

23.3 TROUBLESHOOTING CHART SYMPTOM

PROBABLE CAUSE

Antenna. T r a n s c e i v e r

c o n n e c t e d t o

engine runs. Sound is not emit-

Receiving station

message appears

turned on. Your position is not

DC.

SCU-38

plotter.

connection.

SCU-38

navigation receiver. This radio requires

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 24 CHANNEL ASSIGNMENTS 24.1 GX2400GPS CH

I S/D D

VHF MARINE CHANNEL CHART U C TX RX CHANNEL USE

VTS in selected areas

X 156.150

X

X S D D S D S D S S D S S S S S S S S S S S S D S D S S S D S S S D S

11

13 14 15 15 16

19

1021

U.S. Government Only, Coast Guard

Commercial Commercial ()

(Recreational) Commercial Commercial. VTS in selected areas.

movement ()

State Controlled ()

Commercial

Commercial (USA)

U.S. Government Only (USA) Canadian Coast Guard (Canada) 157.050

131 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 1061 X X 156.075 VHF MARINE CHANNEL CHART U C TX RX CHANNEL USE

I S/D D

on channel 16 (USA)

on channel 16 (Canada)

() 157.150 U.S. Government Only

Public Coast: Coast Guard;

VTS in selected areas.

Public Correspondence (Marine Operator), Port operation, ship movement 156.225

(Recreational)

(Recreational)

Ship movement Digital selective calling (voice

) S D S D D D D D D D S D S D S D S D S D S S S S S

X

X

1064 X

CH

1023

61

63 64 65 66

69

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D CH U C I S/D TX RX CHANNEL USE VHF MARINE CHANNEL CHART

1083

X

X

S S S S S S S S D S S S D S S S D S D S D S D S D D D S S and Ship movement

(Recreational)

(Recreational)

and Ship movement

U.S. Government Only - Environmental protection operations. (USA) Canadian Coast Guard Only (Canada)

U.S. Government Only (USA) Canadian Coast Guard Only (Canada)

() 157.175 U.S. Government Only (USA) Canadian Coast Guard Only (Canada)

Commercial

Commercial

1081 X X 157.075 1082 X X 157.125 NOTE e

133 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 24.2 GX2400GPS/E CH TX (MHz) RX (MHz) SIMPLEX/DUPLEX LOW PWR CHANNEL USE

6

11

13 14 15 16

19

31*1

61

63 64 65 66

69

134

All countries

(except Germany)

4

4

4

4

4

4

4

Germany

VTS VTS VTS SAR

DSC

4

4

4

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D CH TX (MHz) RX (MHz) SIMPLEX/DUPLEX LOW PWR CHANNEL USE All countries

(except Germany)

4

Germany

M*3

3

5

5

5 F1*5

5 F3*5

NOTE:

*1:

*2:

*3:

*4:

*5:

*6: 135 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 25 SPECIFICATIONS

GENERAL Channels .............................................

*(Depending on the region setting)

........................................................ 11 V to 16.5 V Current Drain

.................................................... Transmit .....................................................................

Dimensions () ......................... Flush-Mount Dimensions () ......

TRANSMITTER

............................................................. .......... Audio Response .........................................

Audio Distortion ....................................................................... Modulation ...................................

................................................................................ 136 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D

RECEIVER (for Voice and DSC)

................................ Audio Response .........................................

............]) Channel Spacing ................................................................................. DSC Format .......................................................................... ITU-R M.493-15

RECEIVER (for AIS)

INTERNAL GPS RECEIVER Receiver Channels ..................................................................... 66 Channels

NMEA 0183 INPUT/OUTPUT Sentences

...........................................VDM

......................................... VDM

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 25.1 DIMENSIONS 6.3 (159mm) 6.2 (156mm) 7.1 (180mm) 7.1 (180mm) 1.7 (44mm) 4.8 (121.8mm) 1.2 (30.8mm) 3.8 (97.4mm) 7.8 (197.4mm) 6.3 (159mm) 6.2 (156mm) 1.5 (36.9mm) 7.1 (180mm) 7.1 (180mm) 1.7 (44mm) 4.8 (121.8mm) 1.2 (30.8mm) 3.8 (97.4mm)

) m m 0 8

1

. 3

) m m 0 8

1

. 3

) m m 0 8

1

. 3

. m m 5 8 1 1

7

. 4

) m m 3 6

5

. 2

) m m 3 6

5

. 2 6.8 (172mm) 1.5 (36.9mm)

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 26 FCC RADIO LICENSE INFORMATION

(FCC) requirements that regulate the Maritime Radio Service. 26.1 STATION LICENSE

26.2 RADIO CALL SIGN

26.3 CANADIAN SHIP STATION LICENSING

26.4 FCC / IC INFORMATION

license application.

.................................................... FCC ID ..................................................................................... IC .......................................................................................... 139 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D 27 FCC NOTICE

NOTICE NOTICE

WARNING

140 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D

FCC APPLICATION

ISED APPLICATION

141 A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D STANDARD HORIZON Limited Warranty

On-line Warranty Registration:

www.standardhorizon.com Warranty Terms:

(). Limitations of Warranty:

Warranty Procedures:

purchased.

(or a replacement product)

Other conditions:

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D s e i r e s 0 0 4 2 X G e h t r o f E T A L P M E T R 10 e r e h t u c 65 mm m m 1 6 1 e h t e r e h w n o i t a c o l e h t k r a m o t e t a p m e t s h t e s U l i

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D Declaration of Conformity

EU Declaration of Conformity

Disposal of Electronic and Electrical Equipment

ATTENTION Conditions of usage

FR

UK

A pplication for FC C ID : K6630673X 3D / IC : 511B -30673X 3D Copyright 2020 YAESU MUSEN CO., LTD. All rights reserved. No portion of this manual may be reproduced without the permission of YAESU MUSEN CO., LTD. YAESU MUSEN CO., LTD. Tennozu Parkside Building 2-5-8 Higashi-Shinagawa, Shinagawa-ku, Tokyo 140-0002 Japan YAESU USA 6125 Phyllis Drive, Cypress, CA 90630, U.S.A. YAESU UK Unit 12, Sun Valley Business Park, Winnall Close Winchester, Hampshire, SO23 0LB, U.K. 2001D-AC Printed in China

*EM067N200*

E M 0 6 7 N 2 0 0

 

 

 

 

 

 

 

 

 

 

ID, Part 15.19 and CAUTION drawings GX2400GPS FCC ID: K6630673X3D IC: 511B-30673X3D CAN ICES-3(B) / NMB-3(B) Label location Bottom View GX2400GPS FCC ID: K6630673X3D IC: 511B-30673X3D CAN ICES-3(B) / NMB-3(B) Model:

GX2400GPS LABEL DRAWING YAESU MUSEN CO., LTD.

 

 

YAESU MUSEN CO., LTD. Tennozu Parkside Building 2-5-8 Higashi-Shinagawa, Shinagawa-ku, Tokyo 140-0002 Japan Tel: 81-(0)3-6711-4121Fax: 81-(0)3-6711-4278 Part 15.19 Compliance Statement is placed on the SLAVE CASE (Bottom). 19 March 2020 Federal Communications Commission Authorization and Evaluation Division, 7435 Oakland Mills Road Columbia, MD 21046 USA Re: GX2400GPS / FCC ID: K6630673X3D Gentlemen:

Sincerely, YAESU MUSEN CO., LTD. Kouji Taguchi Engineering Division / Quality Assurance

 

 

YAESU MUSEN CO., LTD. Tennozu Parkside Building 2-5-8 Higashi-Shinagawa, Shinagawa-ku, Tokyo 140-0002 Japan Tel: 81-(0)3-6711-4121Fax: 81-(0)3-6711-4278 19 March 2020 Federal Communications Commission Authorization and Evaluation Division, 7435 Oakland Mills Road Columbia, MD 21046 USA Re: GX2400GPS / FCC ID: K6630673X3D Gentlemen:

A. Part 15.21 Compliance Statement Drawing:

NOTICE Unauthorized changes or modifications to this equipment may void compliance with FCC Rules. Any change or modification must be approved in writing by STANDARD HORIZON. B. Part 15.21 Compliance Statement Drawing Location:

IN USERS MANUAL (Clause 27 FCC NOTICE) Sincerely, YAESU MUSEN CO., LTD. Kouji Taguchi Engineering Division / Quality Assurance

 

 

YAESU MUSEN CO., LTD. Tennozu Parkside Building 2-5-8 Higashi-Shinagawa, Shinagawa-ku, Tokyo 140-0002 Japan Tel: 81-(0)3-6711-4121Fax: 81-(0)3-6711-4278 19 March 2020 Federal Communications Commission EQUIPMENT APPROVAL SERVICES P. O. Box 358315 Pittsburgh, PA 15251-5315 Attention:

Reference:

Authorization and Evaluation Division GX2400GPS FCC ID:

K6630673X3D Pursuant to Sections 0.457 (d) (1) (ii) and 0.459 of the Commissions Rules, the Applicant hereby requires confidential treatment of some of the information accompanying this Application, as listed below:

Confidential Block Diagram Schematics

- Operational Description

(Circuit Description) Parts List Alignment

Short-Term Confidential

External Photos Internal Photos Test Setup Photos

- Users Manual These materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457 (d) (1) (ii), disclosure of the Application and all accompanying documentation will not be made before the date of Grant for this Application. The short term documents shall be held for 180 days grant the date of grant. Sincerely, YAESU MUSEN CO., LTD. Kouji Taguchi Engineering Division / Quality Assurance

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

YAESU MUSEN CO., LTD. Tennozu Parkside Building 2-5-8 Higashi-Shinagawa, Shinagawa-ku, Tokyo 140-0002 Japan Tel: 81-(0)3-6711-4121Fax: 81-(0)3-6711-4278 19 March 2020 Timco Engineering, Inc. 849 NW State Road 45 P.O. Box 370 Newberry, FL 32669 SUBJECT:

No ability to program / FCC ID: K6630673X3D and IC: 511B-30673X3D Model: GX2400GPS To Whom It May Concern:

This devices transmit frequencies can be performed only by the manufacturer or authorized service/maintenance personnel, and the users has no ability to program frequencies. Regards, YAESU MUSEN CO., LTD. Kouji Taguchi Engineering Division / Quality Assurance

 

 

YAESU MUSEN CO., LTD. Tennozu Parkside Building 2-5-8 Higashi-Shinagawa, Shinagawa-ku, Tokyo 140-0002 Japan Tel: 81-(0)3-6711-4121Fax: 81-(0)3-6711-4278 19 March 2020 Timco Engineering, Inc. 849 NW State Road 45 P.O. Box 370 Newberry, FL 32669 SUBJECT:

Applications for Certification FCC ID: K6630673X3D and IC: 511B-30673X3D Model: GX2400GPS To Whom It May Concern:

We, the undersigned, hereby authorize Sharon Hoffman at TIMCO ENGINEERING, INC. on our behalf, to apply for certification on our equipment referenced above. Any and all acts carried out by TIMCO ENGINEERING, INC. on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, YAESU MUSEN CO., LTD. Kouji Taguchi Engineering Division / Quality Assurance