| all | frequencies |
|
exhibits | applications |
|---|---|---|---|---|
| manual |
| app s | submitted / available | |||||||
|---|---|---|---|---|---|---|---|---|
| 1 |
|
OPERATING MANUAL | Users Manual | 2.15 MiB | ||||
| 1 | Parts List/Tune Up Info | |||||||
| 1 | Operational Description | |||||||
| 1 | Parts List/Tune Up Info | |||||||
| 1 | Cover Letter(s) | |||||||
| 1 | External Photos | |||||||
| 1 | Test Report | |||||||
| 1 | ID Label/Location Info | |||||||
| 1 | Internal Photos | |||||||
| 1 | Attestation Statements | |||||||
| 1 | Attestation Statements |
| 1 | OPERATING MANUAL | Users Manual | 2.15 MiB |
QUANTUM GX2360S 25 Watt VHF/FM Marine Transceiver Owner's Manual l Huge alphanumeric LCD, knobs and keys l Large 2.8 inch internal loudspeaker producing louder audio l 30 W Loud Hailer with listen back and 4 fog horns, Bells & Whistles l Removable ClearVoice speaker microphone with 16/9 key and channel l Display shows channel names, and repeats GPS information]
l Capable of connecting 2 optional RAM+ second station remote micro-
l DSC distress call automatically broadcasts lat/long and vessel ID ]
l DSC position request function and NMEA data input/output to connect to selection phones GPS Plotter]
l Versatile user-programmable Scanning, Priority Scan and Dual Watch l NOAA Weather channels and Alert l One-button access to Channel 16 and 9 l One-button access to user selectable preset channels l Access to all US, Canadian and International channels
] with GPS attached GX2360S Page 1 TABLE OF CONTENTS SAFETY/WARNING INFORMATION ............................................................................. 4 FCC RADIO LICENSE INFORMATION ......................................................................... 5 FCC NOTICE ................................................................................................................... 6 GETTING STARTED ....................................................................................................... 7 ABOUT VHF RADIO ................................................................................................ 7 SELECTING AN ANTENNA .................................................................................... 7 COAXIAL CABLE ...................................................................................................... 8 1 GENERAL INFORMATION ....................................................................................... 9 1.1 INTRODUCTION ............................................................................................... 9 1.2 FCC / INDUSTRY CANADA INFORMATION ................................................. 9 2 PACKING LIST ........................................................................................................ 10 3 OPTIONS ................................................................................................................. 10 4 INSTALLATION ....................................................................................................... 11 4.1 LOCATION ....................................................................................................... 11 4.2 ELECTRICAL CONNECTIONS ..................................................................... 11 4.3 ACCESSORY CABLE .................................................................................... 12 4.4 CONNECTION OF GPS WITH NMEA OUTPUT ...................................... 13 4.5 CHECKING GPS CONNECTIONS .............................................................. 14 4.6 CHANGING THE GPS TIME ....................................................................... 14 4.7 CHANGING COG TO TRUE OR MAGNETIC .......................................... 15 4.8 OPTIONAL MMB-84 FLUSH MOUNT INSTALLATION .............................. 16 4.9 OPTIONAL CMP25 RAM+ MIC INSTALLATION ....................................... 17 5 CONTROLS AND INDICATORS ............................................................................ 18 5.1 CONTROLS AND CONNECTIONS .............................................................. 18 6 BASIC OPERATION ................................................................................................ 23 6.1 RECEPTION .................................................................................................... 23 6.2 TRANSMISSION ............................................................................................. 23 6.3 TRANSMIT TIME-OUT TIMER (TOT)........................................................... 23 6.4 SIMPLEX/DUPLEX CHANNEL USE ............................................................ 24 6.5 USA, CANADA, AND INTERNATIONAL MODE .......................................... 24 6.6 NOAA WEATHER CHANNELS .................................................................... 24 6.7 NOAA WEATHER ALERT ............................................................................. 25 6.8 NOAA WEATHER ALERT TESTING ........................................................... 25 6.9 EMERGENCY (CHANNEL 16 USE) ............................................................ 25 6.10 CALLING ANOTHER VESSEL (CHANNEL 16 OR 9) .............................. 26 6.11 MAKING TELEPHONE CALLS .................................................................. 27 6.12 OPERATING ON CHANNELS 13 AND 67 ............................................. 27 6.13 PROHIBITED COMMUNICATIONS ............................................................ 27 6.14 DUAL WATCH (TO CH16) ........................................................................... 27 6.15 MEMORY SCANNING (M-SCAN) ............................................................... 28 6.16 PRIORITY SCANNING (P-SCAN) .............................................................. 28 6.17 CHANNEL A/B INSTANT CALL ................................................................. 29 6.18 PA/FOG OPERATION .................................................................................. 29 6.19 KEYPAD LOCKING ...................................................................................... 30 6.20 NAVIGATION INDICATION .......................................................................... 31 6.21 INTERCOM OPERATION ............................................................................ 31 6.22 VOICE SCRAMBLER .................................................................................. 32 6.23 RESETTING THE TRANSCEIVERS MICROPROCESSOR .................. 32 Page 2 GX2360S TABLE OF CONTENTS 7 DIGITAL SELECTIVE CALLING ............................................................................ 33 7.1 GENERAL ........................................................................................................ 33 7.2 DSC SCAN ...................................................................................................... 33 7.3 USCG DSC WATCH ...................................................................................... 34 7.3.1 Maritime Mobile Service Identity (MMSI) ............................................. 34 7.3.2 Programming the MMSI ......................................................................... 34 7.4 ADDITIONAL DIGITAL SELECTIVE CALLING INFORMATION ............... 35 7.5 DSC DISTRESS CALL .................................................................................. 35 7.5.1 Transmitting a DSC Distress Call ........................................................ 35 7.5.2 Receiving a DSC Distress Call ............................................................ 36 7.6 ALL SHIPS CALL ........................................................................................... 37 7.6.1 Transmitting an All Ships Call .............................................................. 37 7.6.2 Receiving an All Ships Call .................................................................. 38 7.7 INDIVIDUAL CALL .......................................................................................... 38 7.7.1 Setting up the Individual / Position Call Directory ............................. 38 7.7.2 Setting up Individual Reply ................................................................... 39 7.7.3 Setting up Individual Call Ringer ......................................................... 40 7.7.4 Transmitting an Individual Call ............................................................. 40 7.7.5 Receiving an Individual Call ................................................................. 41 7.7.6 Setting Up the Call Waiting Function ................................................. 41 7.8 ADVANCED DSC CALLS ............................................................................. 42 7.8.1 Group Call ................................................................................................. 42 7.8.1.1Setup a Group Call ............................................................................. 42 7.8.1.2Transmitting a Group Call ................................................................... 43 7.8.1.3Receiving a Group Call ....................................................................... 44 7.8.2 Position Request ..................................................................................... 44 7.8.2.1Setting up Position Reply ................................................................... 45 7.8.2.2Transmitting a Position Request to Another Vessel ...................... 45 7.8.2.3Receiving a Position Request ............................................................ 46 7.8.3 Position Send .......................................................................................... 47 7.8.3.1Transmitting a DSC Position Send Call ........................................... 47 7.8.3.2Receiving a DSC Position Send Call ............................................... 47 8 RADIO SETUP MODE ............................................................................................ 48 8.1 LAMP ADJUSTING ......................................................................................... 48 8.2 LCD CONTRAST ............................................................................................ 48 8.3 TIME OFFSET ................................................................................................ 49 8.4 KEY BEEP (ON / OFF) ................................................................................... 50 8.5 WX ALERT (ON / OFF) .................................................................................. 50 8.6 VOICE SCRAMBLER ..................................................................................... 51 8.7 CHANNEL NAMING ....................................................................................... 52 8.8 TRUE MAGNETIC CHANGE (NAV display) ................................................ 53 8.9 FOG ALERT TONE FREQUENCY ................................................................ 53 9 RAM MIC OPERTION ............................................................................................. 54 9.1 RAM MIC CONTROLS .................................................................................. 54 9.2 INTERCOM OPERTION ................................................................................. 57 9.2.1 Communication ......................................................................................... 57 9.2.2 Calling ....................................................................................................... 57 9.3 DSC / RADIO SETUP MODE ........................................................................ 58 10 MAINTENANCE ....................................................................................................... 59 10.1 REPLACEMENT PARTS ............................................................................... 59 10.2 FACTORY SERVICE ..................................................................................... 60 10.3 TROUBLESHOOTING CHART .................................................................... 60 11 CHANNEL ASSIGNMENTS .................................................................................... 61 12 WARRANTY ............................................................................................................. 67 13 SPECIFICATIONS ................................................................................................... 70 GX2360S Page 3 SAFETY / WARNING INFORMATION This radio is restricted to occupational use, work related operations only where the radio operator must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum separation dis-
tance of 0.6 m (2 feet). Failure to observe these restrictions will result in exceeding the FCC RF expo-
sure limits. Antenna Installation:
The antenna must be located at least 0.6 m (2 feet) away from passengers in order to comply with the FCC RF exposure requirements. ON-LINE WARRANTY REGISTRATION Please visit www.standardhorizon.com to register the QUANTUM Ma-
rine VHF. It should be noted that visiting the Web site from time to time may be beneficial to you, as new products are released they will appear on the STANDARD HORIZON Web site. PRODUCT SUPPORT INQUIRIES If you have any questions or comments regarding the use of the QUAN-
TUM, you can visit the STANDARD HORIZON Web site to send an E-
Mail or contact the Product Support team at 800-767-2450 M-F 7:00-
5:00PST. Page 4 GX2360S FCC RADIO LICENSE INFORMATION Standard Horizon radios comply with the Federal Communication Commission
(FCC) requirements that regulate the Maritime Radio Service. STATION LICENSE An FCC ship station license is no longer required for any vessel traveling in U.S. waters (except Hawaii) which is under 20 meters in length. However, any vessel required to carry a marine radio on an international voyage, carrying a HF single side band radiotelephone or marine satellite terminal is required to have a ship station license. FCC license forms, including applications for ship
(506) and land station licenses can be downloaded via the Internet at www.fcc.gov/forms. To obtain a form from the FCC, call (888) 225-5322. RADIO CALL SIGN Currently the FCC does not require recreational boaters to have a Ship Radio Station License. The USCG recommends the boats registration number and the state to be used. CANADIAN SHIP STATION LICENSING You may need a license when traveling in Canada. If you do need a license contact their nearest field office or regional office or write:
Industry Canada Radio Regulatory Branch Attn: DOSP 300 Slater Street Ottawa, Ontario Canada, KIA 0C8 GX2360S Page 5 FCC NOTICE NOTICE Unauthorized changes or modifications to this equipment may void com-
pliance with FCC Rules. Any change or modification must be approved in writing by STANDARD HORIZON. NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful in-
terference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to ra-
dio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Connect the equipment into an outlet on a circuit different from that to Increase the separation between the equipment and receiver. which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Page 6 GX2360S GETTING STARTED ABOUT VHF RADIO The radio frequencies used in the VHF marine band lie between 156 and 158 MHz with some shore stations available between 161 and 163 MHz. The ma-
rine VHF band provides communications over distances that are essentially line of sight (VHF signals do not travel well through objects such as buildings, hills or trees). Actual transmission range depends much more on antenna type, gain and height than on the power output of the transmitter. On a fixed mount 25W radio transmission expected distances can be greater than 15 miles, for a portable 5W radio transmission the expected distance can be greater than 5 miles in line of sight. SELECTING AN ANTENNA Marine antennas are made to radiate signals equally in all horizontal directions, but not straight up. The objective of a marine antenna is to enhance the signal toward the horizon. The degree to which this is accomplished is called the antennas gain. It is measured in decibels (dB) and is one of the major factors in choosing an antenna. In terms of effective radiated power (ERP), antennas are rated on the basis of how much gain they have over a theoretical antenna with zero gain. A 3 foot, 3dB gain antenna represents twice as much gain over the imaginary antenna. Typically a 3 foot 3dB gain stainless steel whip is used on a sailboat mast. The longer 8 foot 6dB fiberglass whip is primarily used on power boats that require the additional gain. GX2360S Page 7 COAXIAL CABLE VHF antennas are connected to the transceiver by means of a coaxial cable a shielded transmission line. Coaxial cable is specified by its diameter and construction. For runs less than 20 feet, RG-58/U, about 1/4 inch in diameter is a good choice. For runs over 20 feet but less than 50 feet, the larger RG-8X or RG-213/U should be used for cable runs over 50 feet RG-8X should be used. For installa-
tion of the connector onto the coaxial cable refer to the figure below. 1/16''
3/4''
1 1/8''
Adapter 3/4''
1/8''
3/8''
5/8''
To get your coax cable through a fitting and into your boats interior, you may have to cut off the end plug and reattach it later. You can do this if you follow the directions that come with the connector. Be sure to make good soldered connections. Page 8 GX2360S 1 GENERAL INFORMATION 1.1 INTRODUCTION The STANDARD HORIZON QUANTUM is a VHF/FM transceiver designed for use in the frequency range of 156.025 to 163.275 MHz. The QUANTUM can be operated from 11 to 16 VDC and has a switchable RF output power of 1 watt or 25 watts. The QUANTUM is capable of RTCM SC101 DSC (Digital Selective Calling) operation and second station operation with the use of the improved optional RAM+ mic (CMP25 remote-control speaker/microphone with display). The QUANTUM operates on all currently-allocated marine channels which are switchable for use with USA, International, or Canadian regulations. It has an emergency channel 16 which can be immediately selected from any channel by pressing the red [16/9] key. NOAA Weather channels can also be accessed immediately by pressing the [WX] key with channel selection. Other features of the transceiver include: scanning, priority scanning, submers-
ible speaker mic, high and low voltage warning, and GPS repeatability. 1.2 FCC / INDUSTRY CANADA INFORMATION The following data pertaining to the transceiver is necessary to fill out the li-
cense application. Type Acceptance ....................................................................... FCC Part 80 Output Power .............................................. 1 Watt (low) and 25 Watts (high) Emission .......................................................................16K0G3E, 16K0G2B Frequency Range .................................................... 156.025 to 163.275 MHz FCC Type Number ................................................................. K6630043X30 Industry Canada Type Approval ............................................ 511B-30043X30 GX2360S Page 9 2 PACKING LIST When the package containing the transceiver is first opened, please check it for the following contents:
GX2360S QUANTUM Transceiver
Mounting Bracket and attaching hardware
Owners Manual
Quick-Reference Card
Power Cord 3 OPTIONS MMB-84 ....................................................................... Flush-Mount Bracket CMP25B/W ............... Remote-Access Microphone (RAM+ Mic, Black/White) CT-100 ...............................................10-foot Extension Cable for RAM+ Mic CVS2500 ............................................................................ Voice Scrambler 101S ........................................................................ Mini Extension Speaker 201S ......................................................................White Extension Speaker 201SZ ................................................ White Flush Mount Extension Speaker 201SBK.................................................................. Black Extension Speaker 201SBKZ ........................................... Black Flush Mount Extension Speaker 220SW .................................................................... 4.5 Round Hail/PA Horn Page 10 GX2360S 4 INSTALLATION 4.1 LOCATION The radio can be mounted at any angle. Choose a mounting location that:
is far enough from any compass to avoid any deviation in compass read-
ing due to the speaker magnet provides accessibility to the front panel controls allows connection to a power source and an antenna has nearby space for installation of a microphone hanger the antenna must be mounted at least 3 feet from radio Note: To insure the radio does not affect the compass or radios performance is not affected by the antenna location, temporarily connect the radio in the de-
sired location and:
a. Examine the compass to see if the radio causes any deviation b. Connect the antenna and key the radio. Check to ensure the radio is operating correctly by requesting a radio check. 4.2 ELECTRICAL CONNECTIONS CAUTION Reverse polarity connections will damage the radio!
Connect the power cord and antenna to the radio. Antenna and Power Supply connections are as follows (see Figure 1):
Antenna Water proof Deck Outlet Fuse Red Black Power Source Optional HAIL/PA Horn Optional Speaker Accessory Cable GPS Navigation Receiver Figure 1. General Installation 1. Mount the antenna at least 3 feet away from the radio. At the rear of the radio, connect the antenna cable. It must have a PL259 connector. RG-8/U coaxial cable must be used if the antenna is 25 feet or more from the radio. RG58 cable can be used for distances less than 25 feet. GX2360S Page 11 2. Connect the red power wire to a 13.8 VDC 20% power source. Connect 3. 4. the black power wire to a negative ground. If an optional remote extension speaker is to be used, refer to section 3.3 for connections. It is advisable to have a Certified Marine Technician check the power output and the standing wave ratio of the antenna after installation. 4.3 ACCESSORY CABLE White: External speaker (+) Shield: External speaker () Red: PA speaker (+) Shield: PA speaker () Blue: NMEA IN (+) from GPS navigation receiver Green: NMEA IN () from GPS navigation receiver Gray: NMEA OUT (+) to GPS navigation receiver Brown: Test port (for the Service Technician) When connecting the external speaker or GPS navigation receiver, strip off about 1 inch (2.5 cm) of the specified wires insulation, then splice the ends together. 16/9 WX A/B QUANTUM GX2360S IC DW NAV H/L SCAN MEM PA/
FOG MENU CALL SET DISTRESS PULL OPEN VOL/PWR SQL Shield Red Gray Green Blue Shield White Blue Green Brown PA Speaker External Speaker Wire Color/Description WHITE - External Speaker (+) SHILED - External Speaker () RED - PA Speaker (+) SHILED - PA Speaker () GREEN - NMEA Ground BLUE- NMEA Input (+) GRAY-NMEA Output (+) Connection Examples Connect to external 4 Ohm audio speaker Connect to external 4 Ohm audio speaker Connect to external 4 Ohm PA speaker Connect to external 4 Ohm PA speaker Connect to NMEA () connection of GPS Connect to NMEA (+) output of GPS Connect to NMEA (+) input of GPS Page 12 GX2360S 4.4 CONNECTION OF GPS WITH NMEA OUTPUT Manufacturer/Model Wires STANDARD HORIZON Orange CP150, CP160 and CP-170C Furuno GP30, 36 Manufacturer/Model Lowrance Portable Magellan Fixed Mount QUANTUM Gray Black (GND) Wires Green Brown White Blue White Black Blue Black (GND) Brown Black (GND) Yellow Green Green Black White Black White Black (GND) Green Blue Blue Green Blue Green Blue Green Blue Green Blue Green Blue Green Blue Green Blue Green Furuno GP1650, 1850 Garmin Fixed Mounts Garmin Portables JRC GPS500 JRC 100 SERIES JRC 200 SERIES Lowrance Fixed Mount QUANTUM Blue Green Blue Green Blue Green Blue Green Blue Green Blue Green Blue Green Blue Green Blue Green Magellan Portable Northstar Raytheon 420 Raytheon 520 / 620 Raytheon RL SERIES Simrad Sitex Neptune, Nautilus Black (GND) Orange Black (GND) Yellow Black (GND) Yellow Brown Blue Brown White Brown White Brown Gray Brown Additional Information:
The GPS must have the NMEA Output turned on and set to 4800 Baud in the setup menu. If there is a selection for parity select none. For further information on interfacing /setting up your GPS. Please contact the manufacturer of the GPS receiver. QUANTUM can read NMEA-0183 version 2.0 or higher. The NMEA supported sentences are:
GLL, GGA, RMC and GNS (RMC sentence is recommended) If you have further inquires, please feel free to contact Product Support at:
Phone: (800) 767-2450 Email: marinetech@vxstdusa.com GX2360S Page 13 4.5 CHECKING GPS CONNECTIONS After connections have been made between the QUANTUM and the GPS, a small satellite icon will appear on the top right corner of the LCD display. To see additional GPS information press and hold the [H/L(NAV)] key until the QUANTUM shows the Date, Time, SOG and COG. 4.6 CHANGING THE GPS TIME From the Factory the QUANTUM shows GPS satellite time or UTC time. A time offset is needed to offset this time to show the local time in your area. 1. Press and hold down the [CALL/SET(MENU)] key until RADIO SETUP menu appears. 2. Press the [CALL/SET(MENU)] key, then select TIME SET with the CHANNEL selector knob. 3. Press the [CALL/SET(MENU)] key. 4. Turn the CHANNEL selector knob to select time off-
set from UTC. See illustration below to find your off-
set time from UTC. If 0:00 is assigned, the time is the same as UTC (Universal Time Coordinated or GMT Greenwich Mean Time). 5. Press the [CALL/SET(MENU)] key to store the time offset. 6. Press the [16/9] key or turn the CHANNEL selector knob to select EXIT, then press the [CALL/SET(MENU)] key to return to the RADIO SETUP menu, select EXIT and press the [CALL/SET(MENU)] key to return to radio operation. OFFSET TIME TABLE Page 14 GX2360S 4.7 CHANGING COG TO TRUE OR MAGNETIC Allows customizing the NAV data showing GPS Course Over Ground (COG). Factory default is True however following the steps below the COG can be changed to Magnetic. 1. Press and hold down the [CALL/SET(MENU)] key until RADIO SETUP menu appears. 2. Press the [CALL/SET(MENU)] key, then select TRUE MAG in the RADIO SETUP menu with the CHANNEL selector knob. 3. Press the [CALL/SET(MENU)] key. 4. Turn the CHANNEL selector knob to select MAG-
NETIC or TRUE. 5. Press the [CALL/SET(MENU)] key to store the se-
lected setting. 6. Turn the CHANNEL selector knob to select EXIT, then press the [CALL/SET(MENU)] key to return to the RADIO SETUP menu, select EXIT and press the [CALL/SET(MENU)] key to return to radio operation. GX2360S Page 15 4.8 OPTIONAL MMB-84 FLUSH MOUNT INSTALLATION 1. Make a rectangular template for the flush mount measuring 2-5/8 H x 6-5/8 W. 2. Use the template to mark the location where the rectangular hole is to be cut. Confirm the space behind the dash or panel is deep enough to accom-
modate the transceiver (at least 6 inches deep). There should be at least 1/2 inch between the transceivers heatsink and any wiring, cables or structures. 3. Cut out the rectangular hole and insert the transceiver. 4. Fasten the brackets to the sides of the transceiver with the lock washer nut combination; so that the mounting screw base faces the mounting surface
(see Figure 2). 5. Turn the adjusting screw to adjust the tension so that the transceiver is tight against the mounting surface. Bracket Adjusting Screw Lock-washer nut combination Figure 2. MMB-84 Flush Mount Instllation Page 16 GX2360S 4.9 OPTIONAL CMP25 RAM+ MIC INSTALLATION 1. Connect the RAM+ MIC Cable to the RAM MIC CONNECTOR on the rear panel, then tighten the Cable Nut (See Figure 3). 2. Referring to Figure 3, make a 1.2 (30 mm) hole in the wall, then insert the RAM+ MIC Cable into this hole. Connect the Gasket and Mount Base to the RAM+ MIC Cable Connector using the Nut. 3. Drill the four Screw holes (approx. 2 mm) on the wall, then install the Mounting Base to the wall using four screws. 4. Put the Rubber Cap on to the Nut. The installation is now completed. Wall Gasket Cap RAM MIC Cable Mounting Bracket Nut Figure 3. CMP25 RAM+ MIC Instllation GX2360S Page 17 5 CONTROLS AND INDICATORS NOTE This section defines each control of the transceiver. See Figure 4 for location of controls. For detailed operating instructions refer to chapter 6 of this manual. 5.1 CONTROLS AND CONNECTIONS POWER SWITCH/VOLUME CONTROL (VOL/PWR) Turns the transceiver on and off as well as adjusts the audio volume. To turn the transceiver on press and hold this knob until the LCD turns on. To turn it off, press and hold this knob until the LCD turns off. When the power is turned on, the transceiver is set to the last selected channel. Secondary Use When the transceiver is turned on while the [SCAN] and [WX] keys are held down, the internal microprocessor is reset. This clears the memory and all user-programmed settings, such as scan memory, and priority scan as-
signments. This condition is known as the default condition, the same as when shipped from the factory. For a list of these defaults, see the section 6.18 Resetting the Transceivers Microprocessor. NOTE Resetting the microprocess will not erase the DSC MMSI and the Individual Directory Call information. SQUELCH CONTROL (SQL) Adjusting this control clockwise, sets the point at which random noise on the channel does not activate the audio circuits but a received signal does. This point is called the squelch threshold. Further adjustment of the squelch control will degrade reception of wanted transmissions.
[DISTRESS] Key Used to send a DSC Distress Call. To send the distress call refer to section 7.5.1 (Transmitting A DSC Distress Call). KEYPAD
[16/9] Key Immediately recalls channel 16 from any channel location. Holding down this key recalls channel 9. Pressing the [16/9] key again reverts to the previous selected working channel. Secondary use Press and hold the [16/9] key then press the [WX] key to switch between USA, International and Canadian bands. Page 18 GX2360S 16/9 WX A/B VOL/PWR SQL QUANTUM GX2360S IC DW NAV H/L SCAN MEM PA/
FOG MENU CALL SET DISTRESS PULL OPEN Figure 4. Controls and Connectors GX2360S Page 19
[WX] Key Immediately recalls the previously selected NOAA weather channel from any channel. Secondary use 1. Holding down the [16/9] key while pressing the [WX] key changes the mode from USA to International or Canadian. 2. Holding down the [WX] and [SCAN] key while turning the power on resets the microprocessor and erases scan channels from memory. This clears the memory and establishes the factory-set defaults. For a list of these defaults, see the section on 6.19 Resetting the Transceivers Microprocessor.
[A/B] Key Immediately recalls two user assigned channels from any channel.
[DW(IC)] Key Scans for voice communications on CH16 and another selected channel until a signal is received on either channel. (Dual watch) NOTE: When the DSC SCANNING feature is enabled (see section 7.2 DSC SCAN), the radio watches for a transmission on CH16, another selected channel, and CH70 until a signal is received (Triple watch). Secondary use Press and hold [DW(IC)] key, when the optional RAM+ Mic is connected, intercom operation will operate between radio and RAM+ Mic.
[H/L(NAV)] Key Toggles between 25 W (High) and 1 W (Low) power. When the [H/L(NAV)]
key is pressed while the transceiver is on channel 13 or 67, the power will temporarily switch from LO to HI power until the PTT is released. The
[H/L(NAV)] key does not function on transmit inhibited and low power only channels. Secondary use Press and hold [H/L(NAV)] key, the LCD displays NAV GPS Data, Time, SOG (Speed Over Ground), and COG (Course Over Ground) when a GPS is connected to the accessory cable of the QUANTUM. See sec-
tion 4.4 CONNECTION OF GPS WITH NMEA OUTPUT.
[SCAN] Key 1. Starts and stops scanning of programmed channels. 2. If held while the [UP(p)] or [DOWN(q)] key on the microphone are pressed or CHANNEL selector knob on radio is turned, the radio will show the channels programmed in scan memory. This function will not work if the unit is scanning. Page 20 GX2360S NOTE: The priority channel is channel 16 only. 3. Pressing and holding again will delete the channel from scan memory.
[MEM] Key Memorizes the selected channel into the transceivers scan memory for scanning. When pressed again, it DELETES the channel from the scan memory. Secondary use Press and hold [MEM] key to lock out the front panel keys and CHAN-
NEL selector konb. Press and hold [MEM] key again, unlock the front panel keys (except [16/9] and [DISTRESS] keys) and CHANNEL selec-
tor konb.
[PA/FOG] Key Available to operate the PA dfunction or the FOG HORN function.
[CALL/SET(MENU)] Key The [CALL/SET(MENU)] key functions as the enter key. Secondary use Press the [CALL/SET(MENU)] key to access the DSC OPERATION menu. The INDIVIDUAL CALL, GROUP CALL, ALL SHIPS CALL, POSITION REQUEST, POSITION SEND, STANDBY MODE, and CALL WAITING functions can be accessed from the DSC OPERA-
TION menu. Press and hold the [CALL/SET(MENU)] key to access the RADIO SETUP or DSC SETUP menu. The following functions can be accessed in the menu (refer to Section7). RADIO SETUP-menu DSC SETUP-menu GX2360S Page 21 CHANNEL SELECTOR KNOB Rotary knob used to select channels and to choose menu items (such as the DSC menu, radio setup and DSC setup menu). The [UP(p)] /
[DOWN(q)] key on the microphone can also be used to select channels and menu items. Secondary Use
While holding down the [SCAN] key and turning the CHANNEL selector knob, you can confirm memory channels for scanning.
Adjust the audio output level while in the PA/FOG mode. ACCESSORY CONNECTION CABLE Connects the QUANTUM to a GPS, and an external speaker. See section 3 OPTIONS for a list of speakers STANDARD HORIZON offers. DC INPUT CABLE Connects the radio to a DC power supply capable of delivering 12V DC. RAM MIC CONNECTORS Connects the QUANTUM to the enhanced RAM+ MIC (Remote Access Microphone). Refer to section 9 RAM+ MIC OPERATION. ANTENNA JACK Connects an antenna to the transceiver. Use a marine VHF antenna with an impedance of 50 ohms. PTT (Push-To-Talk) SWITCH Keys the transmitter when the transceiver is in radio mode. If the transceiver is in the intercom operation mode (between the RAM+ and the QUANTUM), it activates the QUANTUM microphone for voice communications. MICROPHONE Transmits the voice message with reduction of background noise. MICROPHONE SPEAKER The same audio heard through internal radio speaker is heard through mi-
crophone speaker.
[UP(p)] / [DOWN(q)] KEYS The [UP(p)] and [DOWN(q)] on the microphone function the same as the CHANNEL selector knob on the front panel of the transceiver.
[16/9] Key Pressing the [16/9] key immediately recalls channel 16 from any location. Press and hold the [16/9] key to recall channel 9. Pressing the [16/9] key again will revert the radio to the previous selected channel. Page 22 GX2360S 6 BASIC OPERATION 6.1 RECEPTION 1. After the transceiver has been installed, ensure that the power supply and antenna are properly connected. 2. Press and hold the VOL/PWR knob until the radio turns on. 3. Turn the SQL knob fully counterclockwise. This state is known as squelch off. 4. Turn up the VOL/PWR knob until noise or audio from the speaker is at a comfortable level. 5. Turn the SQL knob clockwise until the random noise disappears. This state is known as the squelch threshold. 6. Turn the CHANNEL selector knob to select the desired channel. Refer to the channel chart on page 62 for available channels. 7. When a message is received, adjust the volume to the desired listening level. The BUSY indicator in the LCD is displayed indicating that the channel is being used. 6.2 TRANSMISSION 1. Perform steps 1 through 6 of RECEPTION. 2. Before transmitting, monitor the channel to ensure it is clear. THIS IS AN FCC REQUIREMENT!
3. Press the PTT (push-to-talk) switch. The TX indicator on the LCD is dis-
played. 4. Speak slowly and clearly into the microphone. 5. When the transmission is finished, release the PTT switch. NOTE This is a noise-canceling microphone. The oval slot on the bottom of micro-
phone should be positioned within 1 inch (2.5 cm) from the mouth for opti-
mum performance. 6.3 TRANSMIT TIME - OUT TIMER (TOT) When the PTT switch on the microphone is held down, transmit time is limited to 5 minutes. This limits unintentional transmissions due to a stuck microphone. About 10 seconds before automatic transmitter shutdown, a warning beep will be heard from the speaker(s). The transceiver will automatically go to receive mode, even if the PTT switch is continually held down. Before transmitting again, the PTT switch must first be released and then pressed again. GX2360S Page 23 6.4 SIMPLEX/DUPLEX CHANNEL USE Refer to the VHF MARINE CHANNEL CHART (page 63) for instructions on use of simplex and duplex channels. NOTE All channels are factory-programmed in accordance with FCC (USA), Industry Canada (Canada), and International regulations. Mode of op-
eration cannot be altered from simplex to duplex or vice-versa. 6.5 USA, CANADA, AND INTERNATIONAL MODE 1. To change the modes, hold the [16/9] key and press the [WX] key. The mode changes from USA to International to Canadian with each press of the [WX] key. USA will be displayed on the LCD for USA mode, INTL will be displayed for International mode, and CAN will be displayed for Canadian mode. 2. 3. Refer to the VHF MARINE CHANNEL CHART (page 63) for allocated chan-
nels in each mode. 6.6 NOAA WEATHER CHANNELS 1. To receive a NOAA weather channel, press the [WX] key from any channel. The transceiver will go to the last selected weather channel. 2. Turn the CHANNEL selector knob on the radio or [UP(p)] / [DOWN(q)]
keys on the microphone to select a different NOAA weather channel. 3. To exit from the NOAA weather channels, press the [WX] key. The trans-
ceiver returns to the channel it was on prior to a weather channel. 6.7 NOAA WEATHER ALERT In the event of extreme weather disturbances, such as storms and hurricanes, the NOAA (National Oceanic and Atmospheric Administration) sends a weather alert accompanied by a 1050 Hz tone and subsequent weather report on one of the NOAA weather channels. When the Weather Alert feature is enabled (see section 8.5 WX ALERT), the transceiver is capable of receiving this alert if the following is performed:
1. Program NOAA weather channels into the transceivers memory for scan-
ning. Follow the same procedure as for regular channels under section 6.15. 2. Press the [SCAN] key once to start memory scanning or hold down the
[SCAN] key during memory scanning to start priority scanning. 3. The programmed NOAA weather channels will be scanned along with the regular-programmed channels. However, scanning will not stop on a nor-
mal weather broadcast unless a NOAA alert is received. Page 24 GX2360S 4. When an alert is received on a NOAA weather channel, scanning will stop and the transceiver will emit a loud beep to alert the user of a NOAA broadcast. 5. Press the [WX] key to stop the alert tone and receive the weather report. If the [WX] key is not pressed the alert tone will be emitted for 5 minutes and then the weather report will be received. NOTE The Weather Alert feature is also engaged while the transceiver is re-
ceiving on one of the NOAA weather channels. NOTE 6.8 NOAA WEATHER ALERT TESTING In the event of a major storm or other appreciable weather condition requiring vessels at sea or other bodies of water to be notified, the NOAA (National Oceano-
graphic and Atmospheric Administration) broadcasts a 1050 Hz tone that some marine VHF radios can detect. (Refer to Section 6.7 NOAA WEATER ALERT on how to use this feature.) This tone, when detected, will produce a loud beep from the radio speaker to signal that a weather alert is being broadcast. In order to test this system, the NOAA broadcasts the 1050 Hz tone every Wednesday, sometime between 11 AM and 1 PM. 6.9 EMERGENCY (CHANNEL 16 USE) Channel 16 is known as the Hail and Distress Channel. An emergency may be defined as a threat to life or property. In such instances, be sure the transceiver is on and set to CHANNEL 16. Then use the following procedure:
1. Press the microphone push-to-talk switch and say Mayday, Mayday, May-
day. This is , , (your vessels name). 2. Then repeat once: Mayday, (your vessels name). 3. Now report your position in latitude/longitude, or by giving a true or mag-
netic bearing (state which) to a well-known landmark such as a navigation aid or geographic feature such as an island or harbor entry. 4. Explain the nature of your distress (sinking, collision, aground, fire, heart attack, life-threatening injury, etc.). 5. State the kind of assistance your desire (pumps, medical aid, etc.). 6. Report the number of persons aboard and condition of any injured. 7. Estimate the present seaworthiness and condition of your vessel. 8. Give your vessels description: length, design (power or sail), color and other distinguishing marks. The total transmission should not exceed 1 minute. GX2360S Page 25 9. End the message by saying OVER. Release the microphone button and listen. 10. If there is no answer, repeat the above procedure. If there is still no re-
sponse, try another channel. 6.10 CALLING ANOTHER VESSEL (CHANNEL 16 OR 9) Channel 16 may be used for initial contact (hailing) with another vessel. However, its most important use is for emergency messages. This channel must be monitored at all times except when actually using another channel. It is monitored by the U.S. and Canadian Coast Guards and by other vessels. Use of channel 16 for hailing must be limited to initial contact only. Calling should not exceed 30 seconds, but may be repeated 3 times at 2-minute inter-
vals. In areas of heavy radio traffic, congestion on channel 16 resulting from its use as a hailing channel can be reduced significantly in U.S. waters by using channel 9 as the initial contact (hailing) channel for non-emergency communi-
cations. Here, also, calling time should not exceed 30 seconds but may be repeated 3 times at 2-minute intervals. Prior to making contact with another vessel, refer to the channel charts in this manual, and select an appropriate channel for communications after initial con-
tact. For example, Channels 68 and 69 of the U.S. VHF Charts are some of the channels available to non-commercial (recreational) boaters. Monitor your de-
sired channel in advance to make sure you will not be interrupting other traffic, and then go back to either channel 16 or 9 for your initial contact. When the hailing channel (16 or 9) is clear, state the name of the other vessel you wish to call and then this is followed by the name of your vessel and your Station License (Call Sign). When the other vessel returns your call, immedi-
ately request another channel by saying go to, the number of the other chan-
nel, and over. Then switch to the new channel. When the new channel is not busy, call the other vessel. After a transmission, say over, and release the microphones push-to-talk
(PTT) switch. When all communication with the other vessel is completed, end the last transmission by stating your Call Sign and the word out. Note that it is not necessary to state your Call Sign with each transmission, only at the begin-
ning and end of the contact. Remember to return to Channel 16 when not using another channel. Some radios automatically monitor Channel 16 even when set to other channels or when scanning. Page 26 GX2360S 6.11 MAKING TELEPHONE CALLS To make a radiotelephone call, use a channel designated for this purpose, The fastest way to learn which channels are used for radiotelephone traffic is to ask at a local marina. Channels available for such traffic are designated Public Correspondence channels on the channel charts in this manual. Some ex-
amples for USA use are Channels 24, 25, 26, 27, 28, 84, 85, 86, and 87. Call the marine operator and identify yourself by your vessels name, The marine operator will then ask you how you will pay for the call (telephone credit card, collect, etc.) and then link your radio transmission to the telephone lines. The marine telephone company managing the VHF channel you are using may charge a link-up fee in addition to the cost of the call. 6.12 OPERATING ON CHANNELS 13 AND 67 Channel 13 is used at docks and bridges and by vessels maneuvering in port. Messages on this channel must concern navigation only, such as meeting and passing in restricted waters. Channel 67 is used for navigational traffic between vessels. By regulation, power is normally limited to 1 Watt on these channels. Your radio is programmed to automatically reduce power to this limit on these channels. However, in certain situations it may be necessary to temporarily use a higher power. See page 20 (H/L key) for means to temporarily override the low-power limit on these two channels. 6.13 PROHIBITED COMMUNICATIONS The FCC prohibits the following communications:
False distress or emergency messages:
Messages to any boat except in emergencies and radio tests;
Messages to or from a vessel on land;
Transmission while on land;
Obscene, indecent, or profane language (potential fine of $10,000). 6.14 DUAL WATCH (TO CH16) 1. Adjust the SQL knob until the background noise disappears. 2. Select the channel you wish to dual watch to CH16. 3. Press the [DW(IC)] key. The display will scan between CH16 and the chan-
nel that was selected in step 2. If a transmission is received on the channel selected in step 2, the QUANTUM will dual watch to CH16. 4. To stop Dual Watch press the [DW(IC)] key again. GX2360S Page 27 6.15 MEMORY SCANNING (M-SCAN) NOTE During scanning, the dot matrix area of the LCD will show M-SCAN or P-SCAN depending on the scan mode selected. 1. Adjust the SQL knob until background noise disappears. 2. Select a desired channel to be scanned using the CHANNEL selector knob. Press and hold the
[SCAN] key, MEM will appear on the LCD which indicates the channel has been programmed into the transceivers memory. 3. Repeat step 2 for all the desired channels to be scanned. 4. To DELETE a channel from the transceivers memory, select the channel then press and hold the [SCAN] key, MEM will disappear in the LCD. 5. To start scanning, press the [SCAN] key. Scanning will proceed from the lowest to the highest pro-
grammed channel number and will stop on a chan-
nel when a transmission is received. 6. The channel number will blink during reception. 7. To stop scanning, press the [SCAN], [16/9], [WX], [CALL/SET(MENU)], or PTT key. 6.16 PRIORITY SCANNING (P-SCAN) 1. Channel 16 is set as the priority channel and cannot be changed. 2. To select priority scanning, press the [SCAN] key to start memory scanning (M-SCAN will appears), then press and hold down the [SCAN] key until P-
SCAN appears on the LCD. Scanning will proceed between the memorized channels and the priority channel. CH 16 the prior-
ity channel will be scanned after each programmed channel. MEM CH. CH. 16 CH. 70 MEM CH. CH. 16 CH. 70 3. To stop scanning, press the [SCAN], [16/9], [WX],
[CALL/SET(MENU)], or PTT key. Triple watch (T/W) means the radio is watching CH70 for DSC Calls. Dual watch (D/W) means the radio is not watching CH70 for DSC Calls. NOTE Page 28 GX2360S 6.17 CHANNEL A /B INSTANT CALL Two calling channels (used by an organization or a favorite channel) can be preset. But USA channels 9 and 16, and WX channels should not be assigned as A or B channels because they are readily available with the [16/9] and [WX]
keys. If the [A/B] key is pressed and no channel A or B has been assigned, the alert signal will be present. 6.17.1 Storing new channel A/B 1. Press and hold down the [A/B] key and rotate the CHANNEL Selector knob to select the desired channel. 2. Release the [A/B] key to store a desired channel as channel A/B. 3. Repeat steps to program second channel A/B. 6.17.2 Changing the stored channel A/B 1. Press the [A/B] key for memorized channel to appear. 2. Press and hold down the [A/B] key and rotate the Channel Selector knob to select the desired channel. 3. Release the [A/B] key to store a desired channel as channel A/B. NOTE The stored channels will delete in microprocessor resetting mode only. 6.17.3 Operating the channel A/B Pressing the [A/B] key more than once toggles between channel A, channel B and the channel that was received on. 6.18 PA/FOG OPERATION PA HAIL mode:
PA HAIL mode allows the transceiver to be used as a power hailer when an optional 4 ohm HAIL/PA speaker is installed. The Hail mode has a listen-back feature which provides two way communication through the HAIL/PA speaker. FOG HORN mode:
Automatic signaling is transmitted through the HAIL/PA speaker. 6.18.1 Operating the PA HAIL mode 1. Press the [PA/FOG] key, then select PA with the CHANNEL selector knob. 2. Press the [CALL(MENU)] key. 3. Press the PTT switch to speak through the GX2360S Page 29 HAIL/PAspeaker. Rotate the CHANNEL selector knob to control the AF output level. The AF output level can be set from 0 to 30 watts. 4. To exit the PA HAIL mode, press the [16/9], [WX] or [CALL/SET(MENU)]
key. 6.18.2 Operating the FOG HORN mode Operator can select from FOG 1, FOG 2, FOG 3, FOG 4, HORN, SIREN, AGROUND, or ANCHOR. FOG 1: POWER BOAT UNDERWAY FOG 2: POWER BOAT STOPPED FOG 3: SAIL BOAT, FISH VESSEL, TOW VESSEL FOG 4: VESSEL UNDER TOW 1. Press the [PA/FOG] key, then select FOG with the CHANNEL selector knob. 2. Press the [CALL/SET(MENU)] key. 3. Turn the CHANNEL selector knob to select the func-
tion. 4. Press the [CALL/SET(MENU)] key. 5. On the HORM and SIREN modes, press the PTT switch to activate the tone through the HAIL/PA speaker. Rotate the CHANNEL selector knob to control the AF output level. The AF output level can be set from 0 to 30 watts. 6. To exit the FOG HORN mode, press the [16/9], [WX]
or [CALL/SET(MENU)] key. 6.19 KEYPAD LOCKING To oder to prevent accidental frequency change, front panel keys (except [DIS-
TRESS], [16/9] and [CALL/SET(MENU)] key) and CHANNEL selector knob may be locked out. Press and hold [MEM] key to lock out the front panel keys and CHANNEL selector konb. Press and hold
[MEM] key again, unlock the front panel keys and CHAN-
NEL selector konb. Page 30 GX2360S 6.20 NAVIGATION INDICATION The transceiver has the ability to display the time, SOG and COG date, as well as the vessels position (LAT/LON), when connected to a GPS receiver. 1. Press and hold the [H/L(NAV)] key to display posi-
tion information. If the GPS receiver is not receiving a fix, the display will be as shown in the illustration on the right. 2. To hide the position information, press the
[H/L(NAV)] key. 6.21 INTERCOM OPERATION If the RAM+ Mic is connected to the QUANTUM, you may communicate be-
tween the QUANTUM and RAM+ Mic, or RAM+ Mic and RAM+ Mic (See page 57 for Intercom Operation of the RAM+ Mic). 6.22.1 Communication 1. Press and hold the [DW(IC)] key while in the RA-
DIO mode, the mode is changed to INTERCOM mode. If your QUANTUM is equipped two RAM+ Mic, se-
lect the companion you wish to communicate (RAM1, RAM2, or ALL) with the CHANNEL selector knob, then press the [CALL/SET(MENU)] key to termi-
nated. 2. 2. When the INTERCOM operation is activated, INTERCOM is displayed on the QUANTUM, and IC is dis-
played on the RAM+ Mic. 3. Press the PTT switch. The TALK is displayed. NOTE: A warning beep is emitted when the QUANTUM microphones PTT switch is pressed while the RAM+
Mics PTT switch is pressed.
(MATRIXs PTT switch is pressed)
(RAM+ Mics PTT switch is pressed) 4. Speak slowly and clearly into the microphone, hold the microphone about 1/2 inch away from your mouth. 5. When finished, release the PTT switch. 6. Press and hold the [DW(IC)] key again the mode will revert to RADIO mode. GX2360S Page 31 6.22.2 Calling Hold down the [DW(IC)] key for 1 second or more, when the INTERCOM operation is activated. A calling beep is emitted twice from the transceiver speaker. NOTE Disable any operation of the QUANTUM, when communicate the both RAM+ Mic while INTER-
COM mode. 6.22 VOICE SCRAMBLER If privacy of communications is desired, a CVS2500 voice scrambler (VS) can be installed in the transceiver. Contact your Dealer to have a CVS2500 installed. Refer to the section 8.9 VOICE SCRAMBLER to program the voice scrambler. 1. Turn on the transceiver. 2. Select a channel that was programmed for scram-
bler mode (VS will appear on the LCD).
If a channel is not set for the voice scrambler, the display will be as shown in the illustration at the right (VS will disappear from the LCD).
If a voice scrambler is canceled temporarily in the SETUP menu, the display will be as shown in the illustration at the right. 3. Monitor the channel before transmitting. 4. Transmit the voice message. The signal sent will be scrambled. 6.23 RESETTING THE TRANSCEIVERS MICROPROCESSOR Resetting the microprocessor restores the initial, factory supplied conditions in the transceiver. These are called the default conditions. To reset the microprocessor, first turn the transceiver off. Then while pressing the [WX] and [SCAN] keys, turn the transceiver on. The default conditions are:
No channels in the SCAN memory.
Channel 16 will be selected when the transceiver is turned on.
WX channel 01 will be recalled when the [WX] key is pressed.
Key beep will be on. NOTE Resetting the microprocessor will not erase DSC MMSI and Directory Call Waiting information. Page 32 GX2360S 7 DIGITAL SELECTIVE CALLING 7.1 GENERAL WARNING This radio is designed to generate a digital maritime distress and safety call to facilitate search and rescue. To be effective as a safety device, this equipment must be used only within communication range of a shore-
based VHF marine channel 70 distress and safety watch system. The range of signal may vary but under normal conditions should be approxi-
mately 20 nautical miles. Digital Selective Calling is a semi-automated method of establishing a radio call, it has been designated by the International Maritime Organization (IMO) as an international standard for establishing VHF, MF and HF radio calls. It has also been designated as part of the Global Maritime Distress and Safety Sys-
tem (GMDSS). It is planned that DSC will eventually replace aural watches on distress frequencies and will be used to announce routine and urgent maritime safety information broadcasts. This new system allows mariners to instantly send a distress call with GPS position (when connected to the transceiver) to the US Coast Guard and other vessels within range of the transmission. DSC will also allow mariners to initiate or receive Distress, Urgency, Safety, Routine, POSITION REQUEST, POSI-
TION SEND, and Group calls to or from another vessel equipped with a DSC transceiver. 7.2 DSC SCAN When the radio is shipped from the factory it is programmed so CH70 (the DSC channel) is scanned at all times. A selection is provided in the SETUP MENU to disable the DSC SCAN. Turning off DSC SCAN will disable the radio from re-
ceiving DSC calls (i.e.: Distress Call, Individual Call, All Ships Call, and Position Requests). If you want to use any of the functions the selection must be left ON. To Change DSC SCAN Method:
1. Press and hold down the [CALL/SET(MENU)] key until RADIO SETUP menu appears. 2. Turn the CHANNEL selector knob to select DSC SETUP menu. 3. Press the [CALL/SET(MENU)] key, then select DSC SCAN with the CHANNEL selector knob. 4. Press the [CALL/SET(MENU)] key. GX2360S Page 33 5. Turn the CHANNEL selector knob to select ONor OFF. 6. Press the [CALL/SET(MENU)] key to store the se-
lected setting. 7. To exit this menu and return to radio operation mode press the [16/9] key. 7.3 USCG DSC WATCH The USCG has plans to upgrade its VHF National Distress System (expected by 2005), so at the time of printing only larger vessels that are required to carry VHF DSC radios will be able to hear your distress transmission. 7.3.1 Maritime Mobile Service Identity (MMSI) What is an MMSI?
An MMSI is a nine digit number used on Marine Transceivers capable of using Digital Selective Calling (DSC). This number is used like a telephone number to selectively call other vessels. THIS NUMBER MUST BE PROGRAMMED INTO THE RADIO TO OPERATE THE MATRIX DSC FUCTIONS. How can I obtain an MMSI assignment?
Boat US offers free MMSI numbers. Visit the following to register:
http://www.boatus.com/mmsi/. 7.3.2 Programming the MMSI NOTE User MMSI can be input only twice. If the user tries to input MMSI more than twice, the radio will show the display on the right. If the user needs to change the MMSI more than twice, the transceiver will have to be sent to Factory Service. Refer to the section 10.2 FACTORY SERVICE. 1. Press and hold down the [CALL/SET(MENU)] key until the RADIO SETUP menu appears. 2. Turn the CHANNEL selector knob to the left to se-
lect DSC SETUP menu. 3. Press the [CALL/SET(MENU)] key, then select USER MMSI with the CHANNEL selector knob. 4. Press the [CALL/SET(MENU)] key. The User MMSI number will appear, and the first space will flash. Page 34 GX2360S 5. Select first number of your MMSI, then press the
[CALL/SET(MENU)] key to step to the next number. 6. Repeat step 5 to set your MMSI (up to nine digits). 7. When finished programming the number, press and hold the [CALL/SET(MENU)] key to store the num-
ber in memory. 8. To exit this menu and return to radio operation mode press the [16/9] key. 7.4 ADDITIONAL DIGITAL SELECTIVE CALLING INFORMATION For additional information the USCG has an excellent site that should be visited at www.navcen.uscg.mil/marcoms/gmdss/dsc.html. 7.5 DSC DISTRESS CALL The QUANTUM is capable of transmitting and receiving DSC Distress mes-
sages to all DSC radios. The QUANTUM may be connected to a GPS to also transmit the Latitude, Longitude of the vessel. 7.5.1 Transmitting A DSC Distress Call NOTE To be able to transmit a DSC distress call a MMSI number must be programmed, refer to section 7.3.2 Programming the MMSI In order for your ships location to be transmitted a GPS must be connected to the QUANTUM, refer to section 4.4 CONNECTION OF GPS WITH NMEA OUT-
PUT 1. Lift the red spring loaded DISTRESS cover and press the [DISTRESS] key. The DISTRESS menu will appear on the LCD. 2. Press and hold the [DISTRESS] key. The radios dis-
play will count down (3-2-1) and then transmit the Distress call. 3. When the distress signal is sent, CH70 and TX icon will appear on the LCD. After the message has been sent, the radio will sound a Distress Alarm. 4. The transceiver shadow-watches for a transmis-
sion between CH16 and CH70 until an acknowledg-
ment signal is received. DISTRESS and WAIT-
ING will appear on the LCD. If an acknowledgement is received, select channel 16 and advise your distress situation. 5. GX2360S Page 35 6. If no acknowledgment is received, the distress call is repeated in 4 minute intervals until an acknowl-
edgment is received. 7. When a DSC Distress acknowledgment is received, a distress alarm sounds and channel 16 is automatically selected. The LCD shows the MMSI of the ship responding to your distress. RECEIVED ACK: acknowledgment signal is received. RECEIVED RLY: relay signal is received from another vessel or coast sta-
tion. 8. To cancel the DSC distress alarm signal from the speaker, press any key. Cancel a DSC Distress Call If a DSC Distress call was sent by error the QUANTUM allows you to send a message to other vessels to cancel the Distress Call that was made in error. Press the [CALL/SET(MENU)] key, turn the CHANNEL selector knob to select CANCEL. Then, press the [CALL/SET(MENU)] key or turn off the radio. 7.5.2 Receiving a DSC Distress Call 1. A distress call is received. An emergency alarm sounds. Then channel 16 is automatically selected. 2. Press any key to stop the alarm. 3. Turn the CHANNEL selector knob to change the dis-
play to show the position of the vessel in distress. If the position of the vessel distress data does not include position, the LCD will show the display on the left. 4 You must continue monitoring channel 16 as a coast station may require assistance in the rescue attempt. NOTE Page 36 GX2360S 7.6 ALL SHIPS CALL The All Ships Call function allows contact to be established with other vessel stations without having their ID in the individual calling directory. Also, priority for the call can be designated as Urgency or Safety. URGENCY Call:
This type of call is used when a vessel may not truly be in distress, but have a potential problem that may lead to a dis-
tress situation. This call is the same as saying PAN PAN PAN on channel 16. SAFETY Call: Used to transmit boating safety information to other vessels. This message usually contains information about an overdue boat, debris in the water. Loss of a navigation aid or an impor-
tant meteorological message. This call is the same as saying Securite Securite Securite. 7.6.1 Transmitting an All Ships Call 1. Press the [CALL/SET(MENU)] key. The DSC OP-
ERATION menu will appear. 2. Turn the CHANNEL selector knob to select ALL SHIPS. 3. Press the [CALL/SET(MENU)] key. (To cancel, turn the CHANNEL selector knob to select EXIT.) 5. Turn the CHANNEL selector knob to select the na-
ture of call (URGENCY or SAFETY). 6. Press the [CALL/SET(MENU)] key to transmit the selected type of all ships DSC call. 7. After the ALL SHIPS CALL is transmitted, the trans-
ceiver will switch to CH16. 8. Listen to the channel to make sure it is not busy, then key the microphone and say PAN PAN PAN or Securite Securite Securite depending on the prior-
ity of the call. Then announce your call sign and an-
nounce the channel you wish to switch to for com-
munications. GX2360S Page 37 7.6.2 Receiving an All Ships Call 1. When an all ships call is received, an emergency alarm sounds. The radio will automatically change to channel 16. 2. Press any key to stop the alarm. 3. Turn the CHANNEL selector knob to see the MMSI of the vessel transmitting the All Ships Call. 4. Monitor channel 16 or traffic channel until the UR-
GENCY voice communication is completed. 7.7 INDIVIDUAL CALL This feature allows the QUANTUM to contact another vessel with a DSC VHF radio and automatically switch the receiving radio to a desired communications channel. This feature is similar to calling a vessel on CH16 and requesting to go to another channel (switching to the channel is private between the two stations). 7.7.1 Setting up the Individual / Position Call Directory The QUANTUM has a DSC directory that allows you to store a vessel or per-
son names and the MMSI number associated with vessels you wish to transmit Individual calls, Position Requests and Position Send transmissions. To transmit an Individual call you must program this directory with information of the persons you wish to call, similar to a cellular phones telephone directory. 1. Press and hold down the [CALL/SET(MENU)] key until RADIO SETUP menu appears. 2. Turn the CHANNEL selector knob to select DSC SETUP menu. 3. Press the [CALL/SET(MENU)] key, then select INDIV DIR with the CHANNEL selector knob. 4. Press the [CALL/SET(MENU)] key, then select ADD with the CHANNEL selector knob. 5. Press the [CALL/SET(MENU)] key. 6. Turn the CHANNEL selector knob to scroll through the first letter of the name of the vessel or person you want to reference in the directory. 7. Press the [CALL/SET(MENU)] key to store the first letter in the name and step to the next letter to the right. 8. Repeat step 6 and 7 until the name is complete. The name can consist of up to eleven characters, if you do not use all eleven characters press the Page 38 GX2360S
[CALL/SET(MENU)] key to move to the next space. This method can also be used to enter a blank space in the name. To clear the previous letter, press the
[H/L(NAV)] key. 9. After the eleventh letter or space has been entered, press the [CALL/
SET(MENU)] key to advance to the MMSI (Maritime Mobile Service Iden-
tity Number) number entry. 10. Turn the CHANNEL selector knob to scroll through numbers, 0-9. To enter the desired number and move one space to the right press the
[CALL/SET(MENU)] key. Repeat this procedure until all nine space of the MMSI number are entered. 11. If a mistake was made entering in the name or the MMSI number repeat pressing the [CALL/SET(MENU)] key until the wrong character is selected, then move the channel knob to correct the entry. 12. To store the data entered, press and hold the [CALL/SET(MENU)] key. 13. To enter another individual address, repeat steps 4 through 13. 14. To exit this menu and return to radio operation mode press the [16/9] key. Selecting NEXT or EXIT will automatically save the name and MMSI number into memory. NOTE 7.7.2 Setting up Individual Reply Allows setting up the radio to automatically (default setting) or manually re-
spond to a DSC Individual call requesting you to switch to a working channel for voice communications. When Manual is selected the MMSI of the calling ves-
sel is shown allowing you to see who is calling. This function is similar to caller id on a cellular phone. 1. Press and hold down the [CALL/SET(MENU)] key until RADIO SETUP menu appears. 2. Turn the CHANNEL selector knob to select DSC SETUP menu. 3. Press the [CALL/SET(MENU)] key, then select INDIV REPLY with the CHANNEL selector knob. 4. Press the [CALL/SET(MENU)]key. 5. Turn the CHANNEL selector knob to select AUTO or MANUAL. 6. Press the [CALL/SET(MENU)] key to store the se-
GX2360S Page 39 lected setting. 7. To exit this menu and return to radio operation mode press the [16/9] key. 7.7.3 Setting up Individual Call Ringer When a Individual call is received the radio will produce a ringing tone for 3 minutes. This selection allows the Individual Call ringer time to be changed. 1. Press and hold down the [CALL/SET(MENU)] key until RADIO SETUP menu appear. 2. Turn the CHANNEL selector knob to select DSC SETUP menu. 3. Press the [CALL/SET(MENU)] key, then select INDIV RING with the CHANNEL selector knob. 4. Press the [CALL/SET(MENU)] key. 5. Turn the CHANNEL selector knob to select ringing time of a Individual Call. 6. Press the [CALL/SET(MENU)] key to store the se-
lected setting. 7. To exit this menu and return to radio operation mode press the [16/9] key. 7.7.4 Transmitting an Individual Call This feature allows the user to contact another vessel with a DSC radio. This feature is similar to calling a vessel on CH16 and requesting to go to another channel. Select the traffic channel for voice communication. 1. Press the [CALL/SET(MENU)] key. The DSC OP-
ERATION menu will appear. 2. Turn the CHANNEL selector knob to select INDI-
VIDUAL. (To cancel, select EXIT with the CHAN-
NEL selector knob or press the [16/9] key.) 3. Press the [CALL/SET(MENU)] key. The transceiver will beep, and the Individual directory will appear. 4. Turn the CHANNEL selector knob to select the In-
dividual you want to contact. 5. Press the [CALL/SET(MENU)] key to transmit the individual DSC signal. 6. After INDIVIDUAL CALL is transmitted, the transceiver will wait 8 seconds for the acknowledgment. If the reply signal is not received, the transceiver Page 40 GX2360S will transmit again. 7. After the second INDIVIDUAL CALL is transmitted, if the reply signal is not received, the dot matrix area of the LCD will display SEND to prompt the user to send the call again or exit the mode. 8. When an individual call acknowledgment is received, the established channel is automatically selected and a ringing tone sounds. 9. Press the [CALL/SET(MENU)] key to listen to the channel to make sure it is not busy, then key the microphone and call the other vessel you desire to communicate with. 7.7.5 Receiving an Individual Call When receiving an individual call, an acknowledgment must be sent back to the calling station. The QUANTUM default setting is Automatic, but has a selection that allows you to manually send a reply before the radio will switch to the re-
quested calling channel. This selection is useful if you want to see who is calling and requesting you to switch to a channel for communications, similar to caller id on a cellular phone. 1. When an individual call is received, an individual call ringing alarm sounds. The radio automatically (automatic mode selected) switches to the requested channel. 2. Press any key to stop the alarm. 3. Press the PTT on the mic and talk to the calling ship. 4. Turn the CHANNEL selector knob to see the MMSI of the vessel calling. 7.7.6 Setting Up the Call Waiting Function Allows the QUANTUM to be setup to reply (ABLE) or set the radio so it trans-
mits a call that advises to the vessel the person is UNABLE to reply to the call at this time. This function is similar to a answering machine. When set up in UNABLE and a individual call is received the Individual call from the other vessel is logged in the CALL WAITING directory for you to review and call back at a later time. GX2360S Page 41 1. Press and hold down the [CALL/SET(MENU)] key until RADIO SETUP menu appears. 2. Turn the CHANNEL selector knob to select DSC SETUP menu. 3. Press the [CALL/SET(MENU)] key, then select INDIV ACK with the CHANNEL selector knob. 4. Press the [CALL/SET(MENU)] key. 5. Turn the CHANNEL selector knob to select ABLE or UNABLE. 6. Press the [CALL/SET(MENU)] key to store the se-
lected setting. 7. To exit this menu and return to radio operation mode press the [16/9] key. 7.8 ADVANCED DSC CALLS 7.8.1 Group Call This feature allows the user to contact a group of specific vessels (example members of a yacht club) using DSC radios with Group call function to auto-
matically switch to a desired channel for voice communications. 7.8.1.1 Setup a Group Call For this function to operate the same Group MMSI must be programmed into all the DSC VHF radios within the group of vessels that will be using this fea-
ture. The group MMSI is a 9 digit (first digit permanently set to 0) that will allow other radios to call your vessel along with others to automatically switch to a working channel for voice communications. This function is very useful for yacht clubs and vessels traveling together that want to collectively make announce-
ments on a predetermined channel. 1. Press and hold down the [CALL/SET(MENU)] key until RADIO SETUP menu appears. 2. Turn the CHANNEL selector knob to select DSC SETUP menu. 3. Press the [CALL/SET(MENU)] key, then select GROUP DIR with the CHANNEL selector knob. 4. Press the [CALL/SET(MENU)] key, then select ADD with the CHANNEL selector knob. 5. Press the [CALL/SET(MENU)] key. 6. Turn the CHANNEL selector knob to scroll through the first letter of the name of the group you want to Page 42 GX2360S reference in the directory. 7. Press the [CALL/SET(MENU)] key to store the first letter in the name. Press the [CALL/SET(MENU)]
key to move the cursor one space to the right. 8. Repeat step 6 and 7 until the name is complete. The name can consist of up to eleven characters, if you do not use all eleven characters press the
[CALL/SET(MENU)] key to move to the next space. This method can also be used to enter a blank space in the name. To clear the previous letter, press the
[H/L(NAV)] key. 9. After the eleventh letter or space has been entered, press the
[CALL/SET(MENU)] key to advance to the GROUP MMSI (Maritime Mo-
bile Service Identity Number) number entry. 10. Turn the CHANNEL selector knob to scroll through numbers, 0-9. 11. To enter the desired number and move one space to the right press the [CALL/SET(MENU)] key. Re-
peat procedure until all nine spaces of MMSI num-
ber are entered. 12. If a mistake was made entering in the name or the M M S I n u m b e r r e p e a t p r e s s i n g t h e
[CALL/SET(MENU)] key until the wrong character is selected, then move the CHANNEL selector knob to correct the entry. 13. To store the data entered, press and hold the [CALL/SET(MENU)] key. 14. To enter another individual address, repeat steps 4 through 13. 15. To exit this menu and return to radio operation mode press the [16/9] key. 7.8.1.2 Transmitting a Group Call 1. Select the desired channel to use Group Call for voice communications. 2. Press the [CALL/SET(MENU)] key. The DSC OP-
ERATION menu will appear. 3. Turn the CHANNEL selector knob to select GROUP. (To cancel, select EXIT with the CHAN-
NEL selector knob or press [16/9] key.) 4. Press the [CALL/SET(MENU)] key. The transceiver will beep, and the Group directory will appear. 5. Turn the CHANNEL selector knob to select the Group you want to contact. 6. Press the [CALL/SET(MENU)] key to transmit the Group Call signal. GX2360S Page 43 7. When the Group Call signal is sent, the dot-matrix area of the LCD will be as shown in the illustration at the right. 8. After the GROUP CALL is transmitted, all the radios in the group will switch to the designated channel. 9. Listen to the channel to make sure it is not busy, then key the microphone and call the other vessels you desire to communicate with. 7.8.1.3 Receiving a Group Call 1. When a group call is received, the QUANTUM will produce a ringing alarm sound. 2. The radio automatically switches to the requested channel. 3. Press any key to stop the alarm. 4. Monitor the channel for the person calling the Group for a message. 5. If you want to respond, monitor the channel to make sure it is clear, then press the PTT on the mic and talk to the calling ship(s). After a Group call is received, the time the call was made and the ships MMSI or vessels name will appear on the LCD. NOTE 7.8.2 Position Request Advancements in DSC have made it possible to poll the location of another vessel and show the position of that vessel on the display of the QUANTUM. Standard Horizon has taken this feature one step further, if any Standard Hori-
zon GPS is connected to the QUANTUM, the polled position of the vessel is shown on the display of the GPS chart plotter making it easy to navigate to the location of the polled vessel. This is a great feature for anyone wanting to know the position of another vessel. For example you buddy that is catching fish, or finding the location of a person you are cruising with. NOTE The other vessel must have an operating GPS receiver connected to its DSC transceiver and must not have its transceiver set to deny position requests. (Refer the section 7.9 to enter information into the individual directory). Page 44 GX2360S 7.8.2.1 Setting up Position Reply The QUANTUM can be set up to automatically or manually send your position to another vessel. This selection is important if you are concerned about some-
one polling the position of your vessel that you may not want to. In the manual mode you will see the MMSI or persons name shown on the display allowing you to choose to send your position to the requesting vessel. 1. Press and hold down the [CALL/SET(MENU)] key until RADIO SETUP menu appear. 2. Turn the CHANNEL selector knob to select DSC SETUP menu. 3. Press the [CALL/SET(MENU)] key, then select POS REPLY with the CHANNEL selector knob. 4. Press the [CALL/SET(MENU)] key. 5. Turn the CHANNEL selector knob to select AUTO or MANUAL. In AUTO mode, after a DSC POS Request is received, the radio will automatically transmit your vessels position. In MANUAL mode, the display of the QUANTUM will show who is re-
questing the position. 6. Press the [CALL/SET(MENU)] key to store the se-
lected setting. 7. To exit this menu and return to radio operation mode press the [16/9] key. 7.8.2.2 Transmitting a Position Request to Another Vessel NOTE To transmit a Position Request, you must setup the QUANTUM DSC Individual / Position Call Directory with the name of the vessel(s) or per-
son and the MMSI of the DSC radio you wish to poll. To setup this direc-
tory refer to section 12.1 Setting up the Individual / Position Call Direc-
tory 1. Press the [CALL/SET(MENU)] key. The DSC OP-
ERATION menu will appear in the display. 2. Turn the CHANNEL selector knob to select the POS REQUEST. 3. Press [CALL/SET(MENU)] key to show the Posi-
tion request directory. This directory uses the INDI-
VIDUAL Directory information. 4. Turn the CHANNEL selector knob to select a name. 5. Press the [CALL/SET(MENU)] key to transmit the position request DSC call. GX2360S Page 45 6. After a DSC position request is transmitted, the trans-
ceiver remains on channel 70 until position data is received from the polled vessel. 7. When the QUANTUM receives the position from the polled vessel it is shown on the radio display and also transferred to the GPS Chart plotter. If the QUANTUM does not receive a reply, the LCD will display SEND to prompt the user to send the call again or exit the mode. 8. If the QUANTUM does not receive position data from the polled vessel, the LCD will show NO POSITION DATA. NOTE 7.8.2.3 Receiving a Position Request When a position request call is received from another vessel, a ringing alarm will sound and POS REQUEST will be show in the LCD. Operation and trans-
ceiver function differs depending on POS REPLY in the DSC SETUP menu setting. Automatically reply:
1. When a position request call is received, a calling alarm sounds 4 times. Then requested position coordinates are transmit-
ted automatically to the vessel requesting your ves-
sels position. 2. To exit from position request display, press any key. Manually reply:
1. When a position request call is received from an-
other vessel, the LCD will be as shown in the illus-
tration at the right. 2. A ringing alarm sounds 4 times. Then select type of reply function REPLY or NO REPLY by using the CHANNEL selector knob. 3. The QUANTUM display will show REPLY or NO REPLY allowing you choose to send your vessels location by using the CHANNEL selector knob. 4. When REPLY is selected, press the [CALL/SET(MENU)] key. And the your position will be transmitted to the requesting vessel. 5. To exit from position request display, press any key. Page 46 GX2360S 7.8.3 Position Send The feature is similar to Position Request, however instead of requesting a position of another vessel this function allows you to send your position to an-
other vessel. Your vessel must have an operating GPS receiver connected for the QUANTUM to send the position. NOTE To transmit a Position Send Call, you must setup the QUANTUM DSC Individual / Position Call Directory with the name of the vessel(s) or per-
son and the MMSI of the DSC radio you wish to send your position to. To setup this directory refer to section 7.7.1 Setting up the Individual / Posi-
tion Call Directory. 7.8.3.1 Transmitting a DSC Position Send Call 1. Press the [CALL/SET(MENU)] key. The DSC OP-
ERATION menu will appear in the display. 2. Turn the CHANNEL selector knob to select the POS SEND. 3. Press the [CALL/SET(MENU)] key to select the In-
dividual directory. 4. Turn the CHANNEL selector knob to select a name in the directory. 5. Press the [CALL/SET(MENU)] key to send your po-
sition to the selected vessel. 6. After your position is transmitted, the resend menu will appear. To send your position again, select SEND and press the [CALL/SET(MENU)] key. 7. To exit the mode, select EXIT and press the
[CALL/SET(MENU)] key. 7.8.3.2 Receiving a DSC Position Send Call When another vessel transmits their vessels location to the QUANTUM the following will happen:
1. A ringing sound will be produced when the call is received. 2. Press the [16/9] key to stop ringing 3. The position from the vessel sending it's position will be shown on the dis-
play of the radio and also transferred to any Standard Horizon GPS Chart plotter if connected. GX2360S Page 47 8 RADIO SETUP NOTE The optional RAM+ MIC CMP25 can be also change the SETUP menu. Refer to page 54 for details. 8.1 LAMP ADJUSTING Allows setting up the backlight intensity or to turn it off. 1. Press and hold down the [CALL/SET(MENU)] key until RADIO SETUP menu appears. 2. Press the [CALL/SET(MENU)] key, then select LAMP in the RADIO SETUP menu with the CHANNEL selector knob. 3. Press the [CALL/SET(MENU)] key. 4. Turn the CHANNEL selector knob to select the de-
sired level. When OFF is selected, the lamp is ex-
tinguished. 5. Press the [CALL/SET(MENU)] key to store the se-
lected level. 6. To exit this menu and return to radio operation mode press the [16/9] key. 8.2 LCD CONTRAST Due to varying mounting (overhead or below) this selection sets up the display for best viewabilty. 1. Press and hold down the [CALL/SET(MENU)] key until RADIO SETUP menu appears. 2. Press the [CALL/SET(MENU)] key, then select CONTRAST in the RADIO SETUP menu with the CHANNEL selector knob. 3. Press the [CALL/SET] key. 4. Turn the CHANNEL selector knob to select the de-
sired level. The contrast level can be set from 1 to 7. 5. Press the the [CALL/SET(MENU)] key to store the selected level. 6. To exit this menu and return to radio operation mode press the [16/9] key. Page 48 GX2360S 8.3 TIME OFFSET Sets the time offset between local time and UTC (time GPS sends to radio). Time is displayed when GPS position (LAT/LON) is displayed by pressing the
[H/L(NAV)] key. 1. Press and hold down the [CALL/SET(MENU)] key until RADIO SETUP menu appears. 2. Press the [CALL/SET(MENU)] key, then select TIME SET in the RADIO SETUP menu with the CHANNEL selector knob. 3. Press the [CALL/SET(MENU)] key. 4. Turn the CHANNEL selector knob to select time off-
set from UTC. See illustration below to find your off-
set time from UTC. If 0:00 is assigned, the time is the same as UTC (Universal Time Coordinated or GMT Greenwich Mean Time). 5. Press the [CALL/SET(MENU)] key to store the time offset. 6. To exit this menu and return to radio operation mode press the [16/9] key. OFFSET TIME TABLE GX2360S Page 49 8.4 KEY BEEP (ON/OFF) This selection allows the beep tone when a key is pressed to be turned off. 1. Press and hold down the [CALL/SET(MENU)] key until RADIO SETUP menu appears. 2. Press the [CALL/SET(MENU)] key, then select KEY BEEP in the RADIO SETUP menu with the CHAN-
NEL selector knob. 3. Press the [CALL/SET(MENU)] key. 4. Turn the CHANNEL selector knob to select ON or OFF. 5. Press the [CALL/SET(MENU)] key to set the key beep condition. 6. To exit this menu and return to radio operation mode press the [16/9] key. NOTE Emergency alarm and beeps for DSC operation cannot be turned OFF. 8.5 WX ALERT (ON/OFF) This selection allows the radios NOAA Weather alert to be turned off. Default setting is ON. 1. Press and hold down the [CALL/SET(MENU)] key until RADIO SETUP menu appears. 2. Press the [CALL/SET(MENU)] key, then select WX ALERT in the RADIO SETUP menu with the CHANNEL selector knob. 3. Press the [CALL/SET(MENU)] key. 4. Turn the CHANNEL selector knob to select ON or OFF. 5. Press the [CALL/SET(MENU)] key to store the se-
lected setting. 6. To exit this menu and return to radio operation mode press the [16/9] key. Page 50 GX2360S 8.6 VOICE SCRAMBLER
(Operates only when the optional CVS2500 is installed) This menu is used to setup the channels to be scrambled and the scrambler code. This menu will not appear unless a CVS2500 is installed. 1. Press and hold down the [CALL/SET(MENU)] key NOTE until RADIO SETUP menu appears. 2. Press the [CALL/SET(MENU)] key then select SCRAMBLER in the RADIO SETUP menu with the CHANNEL selector knob. 3. Press the [CALL/SET(MENU)] key then select CODE in the SCRAMBLER menu with the CHAN-
NEL selector knob. 4 Press the [CALL/SET(MENU)] key then turn the CHANNEL selector knob to change the scrambler code. The scrambler code can be set from 0 to 3 and OFF. When OFF is selected the voice scram-
bler is disabled. 5. Press the [CALL/SET(MENU)] key to store the se-
lected code. 6. Select CHANNEL in the SCRAMBLER menu with the CHANNEL selector knob, then press the [CALL/
SET] key. 7. Turn the CHANNEL selector knob to change the Scrambler channel. 8. Press the [SCAN] key to store the selected chan-
nel. Repeat steps 6 and 7 to set other channels. 9. Press the [CALL/SET(MENU)] key to return to the SCRAMBLER menu. 10. To exit this menu and return to radio operation mode press the [16/9] key. GX2360S Page 51 8.7 CHANNEL NAMING This selection allows you to customize the name of a channel from the default name. 1. Press and hold down the [CALL/SET(MENU)] key until RADIO SETUP menu appear. 2. Press the [CALL/SET(MENU)] key, then select CH NAME in the RADIO SETUP menu with the CHANNEL selector knob. 3. Press the [CALL/SET(MENU)] key. 4. Turn the CHANNEL selector knob to select the chan-
nel to be named and press the [CALL/SET(MENU)]
key. 5. Turn the CHANNEL selector knob scroll through the alphabet and 0 - 9. 6. Press the [CALL/SET(MENU)] key to enter the de-
sired letter and move the cursor one space to the right. 7. Repeat procedure until the name is complete. The name can consist of up to twelve characters. If you do not use all twelve character, press the
[CALL/SET(MENU)] key to move to the next space. To clear the previous letter, press the [H/L(NAV)]
key. 8. Press and hold down the [CALL/SET(MENU)] key to enter the name and exit from the CH NAME menu. The LCD will return to the SETUP menu. 9. If you want to enter the name of another channel, repeat steps 3 through 8. 10. To exit this menu and return to radio operation mode press the [16/9] key. Page 52 GX2360S 8.8 TRUE MAGNETIC CHANGE (NAV display) Allows customizing the GPS COG (Course Over Ground) displayed on the LCD to be in True or Magnetic. 1. Press and hold down the [CALL/SET(MENU)] key until RADIO SETUP menu appear. 2. Press the [CALL/SET(MENU)] key, then select TRUE MAG in the RADIO SETUP menu with the CHANNEL selector knob. 3. Press the [CALL/SET(MENU)] key. 4. Turn the CHANNEL selector knob to select MAG-
NETIC or TRUE. 5. Press the [CALL/SET(MENU)] key to store the se-
lected setting. 6. To exit this menu and return to radio operation mode press the [16/9] key. 8.9 FOG ALERT TONE FREQUENCY This selection allows you to select the Alert Tone Frequency for the PA/FOG Operation. Available selections are 250 Hz through 850 Hz in 50 Hz step multiple. 1. Press and hold down the [CALL/SET(MENU)] key until RADIO SETUP menu appear. 2. Press the [CALL/SET(MENU)] key, then select FOG FREQ. in the RADIO SETUP menu with the CHANNEL selector knob. 3. Press the [CALL/SET(MENU)] key. 4. Turn the CHANNEL selector knob to select desired tone frequency. 5. Press the [CALL/SET(MENU)] key to store the se-
lected setting. 6. To exit this menu and return to radio operation mode press the [16/9] key. GX2360S Page 53 9 RAM+ MIC OPERATION If the enhanced optional RAM+ Mic (CMP25) is connected to the remote micro-
phone connector on the transceivers rear panel, the transceiver can use the remote control operation except for a few functions. The RAM+ Mic supplied with 23 feet (7 m) of routing cable and can be extended up to 70 feet (21 m) using three 23 feet extension cables model CT-100. The intercom operation can be used between the RAM+ Mic and the transceiver. IC DW NAV MEM SCAN CALL SET MENU C
. I
. U WX 16 9 9.1 RAM+ MIC CONTROLS SQUELCH CONTROL (SQL) Activates the squelch adjusting mode. Press this key to activate the squelch adjusting mode. Press the microphones [p] or [q] key to adjust the squelch. When this key is pressed and held down for 1 second or more, the squelch is turned off. VOLUME KEY (VOL) Activates the volume adjusting mode. Press this key to activate the volume adjusting mode. Press the microphones [p] or [q] to adjust the volume. Page 54 GX2360S POWER SWITCH (PWR) Press and hold down this key to turn to the transceiver and RAM+ Mic on and off. PTT (Push-To-Talk) SWITCH Activates transmission.
[H/L] KEY Toggles between high and low power. When the [H/L] key is pressed while the transceiver is on channel 13 or 67, the power will temporarily switch from LO to HI power until the PTT is released. The [H/L] key does not function on transmit inhibited and low power only channels.
[p](UP)/[q](DOWN) KEY These keys are used to select channels, adjusts the volume and squelch level, and to choose the item selection of different functions (such as the DSC operation). In many ways, these keys emulate the function of the transceivers CHANNEL selector knob.
[16/9] KEY Immediately recalls channel 16 from any channel location. Holding down this key recalls channel 9. Pressing the [16/9] key reverts to the previous selected working channel. Secondary use Please see secondary use for the [WX] and [MEM] key. KEY PAD
[SCAN] Key 1. Starts and stops scanning of programmed channels. 2. If held while the [UP(p)] or [DOWN(q)] key on the microphone are pressed or CHANNEL selector knob on radio is turned, the radio will show the channels programmed in scan memory. This function will not work if the unit is scanning. NOTE: The priority channel is channel 16 only.
[CALL/SET] Key The [CALL/SET] key functions as the enter key. Secondary use Press the [CALL/SET] key to access the DSC OPERATION menu. Press and hold the [CALL/SET] key to access the SETUP menu. GX2360S Page 55
[DW] Key Watches for a transmission on CH16 and another selected channel until either signal is received. (Dual watch) NOTE: When the DSC SCANNING feature is enabled (see section 7.15 DSC SCAN), the radio watches for a transmission on CH16, another selected channel, and CH70 until either signal is received (Triple watch). Secondary use Press and hold [DW] key, intercom operation will operate between radio and RAM Mic.
[NAV] Key Press and hold this key, when connected to the GPS receiver, the LCD displays Position Data, Time, SOG (Speed Over Ground), and COG (Course Over Ground) from the GPS.
[WX] Key Immediately recalls the previously selected NOAA weather channel from any channel location. Secondary use 1. Holding down the [16/9] key while pressing the [WX] key changes the mode from USA to International or Canadian. NOTE: If position is displayed, this icon will be hidden. 2. Holding down the [WX] and [SCAN] key while turning the power on re-
sets the microprocessor and erases scan channels from memory. This clears the memory and establishes the factory-set defaults. For a list of these defaults, see the section on Resetting the Transceivers Micropro-
cessor.
[DISTRESS] KEY Used to send a DSC Distress Call. To send the distress call:
1. Lift the red rubber cover. 2. Press and hold the Red button. The RAM+ display will count down (3-2-1) and then transmit the Distress call. 3. When the distress signal is sent, Ch70 and TX icon will appear on the LCD. After the message has been sent, the radio will sound a Distress Alarm. 4. The transceiver shadow-watches for a transmission on CH16 or CH70 until an acknowledgment signal is re-
ceived. DISTRESS and WAITING will appear on the LCD. If an acknowledgement is received, select channel 16 and advise your distress situation. 5. Page 56 GX2360S 6. If no acknowledgment is received, the distress call is repeated in 4 minute intervals until an acknowledgment is received. 7. When a DSC Distress acknowledgment is received, a distress alarm sounds and channel 16 is automatically selected. The LCD shows the MMSI of the ship responding to your distress. RECEIVED ACK: acknowledgment signal is received. RECEIVED RLY:
relay signal is received from another vessel or coast station. 8. To cancel the DSC distress alarm signal from the speaker, press any key. 9.2 INTERCOM OPERATION 9.2.1 Communication 1. Press and hold the [DW] key while in the RADIO mode, 2. the mode is changed to INTERCOM mode. If your QUANTUM is equipped two RAM+ Mic, select the companion you wish to communicate (RADIO, RAM, or ALL) with the [p]/[q] key, then press the [CALL/SET] key to ter-
minated. 3. When the INTERCOM operation is activated, IC is dis-
played on the RAM+ Mic and INTERCOM is displayed on the QUANTUM. 4. Press the PTT switch. The TALK is displayed. NOTE: A warning beep is emitted when the RAM+ Mic PTT switch is pressed while the transceiver microphones PTT switch is pressed. 5. Speak slowly and clearly into the mi-
crophone, hold the microphone about 1/2 inch away from your mouth.
(RAM+ Mics PTT switch is pressed)
(MATRIXs PTT switch is pressed) 6. When finished, release the PTT switch. 7. Press the [DW] key again the mode will revert to RADIO mode. 9.2.2 Calling Hold down the [DW] key for 1 second or more, when the INTERCOM opera-
tion is activated. A calling beep is emitted twice from the transceiver speaker. GX2360S Page 57 9.3 DSC/RADIO SETUP MODE The CMP25 can access the DSC / RADIO setup menu (refer to section 7 DSC/RADIO SETUP for details). However, the LAMP, CONTRAST, and KEY BEEP menu item which is accessed from the CMP25 only controls the CMP25s display and speaker. DSC/RADIO Setup mode from the CMP25:
1. Press and hold down the [CALL/SET] key until RADIO SETUP menu appears. 2. Press the [p]/[q] key to select RADIO SET or DSC SETUP menu. 3. Press the [CALL/SET] key, then select the menu item you wish to work on by pressing the [p]/[q] key. 4. Press the [CALL/SET] key. 5. Press the [p]/[q] key to change the value or condition for the menu item, then press the [CALL/SET] key to save the new setting. 6. Press the [p]/[q] key to select EXIT, then press the [CALL/SET] key to return to the normal operation. RADIO SETUP-menu DSC SETUP-menu Page 58 GX2360S 10 MAINTENANCE The inherent quality of the solid-state components used in this transceiver will provide many years of continuous use. Taking the following precautions will prevent damage to the transceiver. Keep the microphone connected or the jack covered at all times to prevent corrosion of electrical contacts;
Never key the microphone unless an antenna or suitable dummy load is connected to the transceiver. Ensure that the supply voltage to the transceiver does not exceed 16 VDC or fall below 11 VDC. Use only STANDARD HORIZON-approved accessories and replacement parts. In the unlikely event of serious problems, please contact your Dealer or our repair facility. Address and phone numbers for this facility, as well as warranty information, are contained in section 12 WARRANTY. 10.1 REPLACEMENT PARTS Occasionally an owner needs a replacement mounting bracket or knob. These can be ordered from our Parts Department by writing or calling:
Marine Division of Vertex Standard US Headquarters 10900 Walker Street, Cypress, CA 90630, U.S.A. Telephone (714) 827-7600 Commonly requested parts, and their part numbers are listed below. Power Code: T9023306 VOL/SQL Knob: RA0542600 Rotary Channel Knob: RA0542500 Mounting Bracket: RA0544200 Mounting Bracket Knob: RA045910A Microphone Hanger: RA0458800 GX2360S Page 59 10.2 FACTORY SERVICE In the unlikely event that the radio fails to perform or needs servicing, please contact the following:
Standard Horizon Attention Marine Repair Department 10900 Walker Street Cypress, CA 90630 Telephone (800) 366-4566 An RA Return Authorization number is not necessary to send a product in for service. Include a brief note describing the problem along with your name, re-
turn address, phone number, and proof of purchase. 10.3 TROUBLESHOOTING CHART SYMPTON Transceiver fails to power up. REMEDY a. Check the 12VDC battery connections and the fuse. PROBABLE CAUSE No DC voltage to the transceiver, or blown fuse. b. The VOL/PWR knob needs to be pressed and held to turn the radio on. Transceiver blows fuse when connected to power supply. Reversed power wires. Check the power cable for DC voltage, or re-
place the fuse (6A 250V). Make sure the red wire is connected to the posi-
tive (+) battery post, and the black wire is con-
nected to the negative (-) battery post. If the fuse still blows, contact your Dealer. Reroute the DC power cables away from the engine. Add noise suppressor on power cable. Change to resistive spark plug wires and/or add an alternator whine filter. Check the connections of the accessory cable. Have the antenna checked or test the trans-
ceiver with another antenna. If the problem per-
sists, contact your Dealer for servicing. Engine noise. Accessory cable. Antenna. Popping or whining noise from the speaker while engine runs. Sound is not emitted f r o m t h e e x t e r n a l speaker. Receiving station re-
p o r t l o w t r a n s m i t power, even with trans-
ceiver set to HI power. HI BATTERY or LO BATTERY message is appeared when the power is turned on. Your position is not dis-
played. The power supply voltage is too high or too low. Confirm that the connected power supply volt-
age is not 17 volts or lower than 10 volts. Con-
firm that the generator has not malfunctioned. Accessory cable. Setting of the GPS navigation receiver. Check the accessory cable connection. Some GPS use the battery ground line for NMEA connection. Check the output signal format of the GPS navi-
gation receiver. This radio requires NMEA0183 format with GLL sentence as an output signal. If the GPS has a baud rate setting make sure to select 4800 and parity to NONE. Page 60 GX2360S 11. CHANNEL ASSIGNMENTS Tables on the following columns list the VHF Marine Channel assignments for U.S.A. and International use. Below are listed some data about the charts. 1. VTS. Where indicated, these channels are part of the U.S. Coast Guards Vessel Traffic System. 2. Alpha channel numbers, that is, channel numbers followed by the letter A
(such as Channel 07A) are simplex channels on the U.S.A. or Canadian channel assignments whose counterparts in the International assignments are duplex channels. International channels do not use alpha numbers. If you call the Coast Guard on Channel 16, they will sometimes ask you to go to channel 22 Alpha. This is a channel assigned to U.S.A, and Cana-
dian Coast Guards for handling distress and other calls. If your radio is set for International operation you will go to Channel 22 instead of 22A, and will not be able to communicate with the Coast Guard. To use Channel 22A, your radio must be set for USA or Canada operation, usually by a U/I/C
(USA/International/Canada) control or combination of controls. Channel 22
(without an A) is an International duplex channel for port operations. Some radios indicate an A adjacent to the alpha channels on the display;
on others alpha is not indicated but the proper channel is selected based on the U/I/C setting. 3. Bridge-to-Bridge channels (for example, Channel 13) are for use by bridge operators on intercoastal waterways and rivers. It is also used by marine vessels in the vicinity of these bridges for navigation and for communicat-
ing with the bridge operators. Note that a limit of 1 Watt is specified for these channels. See page 27 for additional information. 4. The S/D column on the chart indicates either S (simplex) or D (duplex). Simplex means transmitting and receiving on the same frequency. Only one party at a time can talk, unlike a telephone. Be sure to say over and release your microphone push-to-talk switch at the end of each transmis-
sion. Duplex operation involves the use of one frequency for transmitting and a separate frequency for receiving. On channels specified as duplex on the charts, correct mode of operation is established automatically by your radio when you select a channel; you cannot change the mode. And you still must release the push-to-talk switch after each transmission in order to listen to the radio. 5. Channels normally used by recreational boaters are those that include the term non-commercial in the Channel Use column of the chart. Some of these are shared with other users and some are used only in certain geo-
graphic regions. GX2360S Page 61 6. Marine vessels equipped with VHF radios are required to monitor Channel 16. CH U C 01 X 01A X I S/D X 02 03 03A X 04 04A 05 05A X 06 X 07 07A X X 08 09 X X X X X X X 10 11 12 13 14 15 15 16 17 18 18A X 19 19A X 19A 20 X X X 20A X 21 21A X 22 22A X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X VHF MARINE CHANNEL CHART CHANNEL USE RX TX D 156.050 160.650 Public Correspondence (Marine Operator) S 156.050 Port Operation and Commercial. VTS in selected areas D 156.100 160.700 Public Correspondence (Marine Operator) D 156.150 160.750 Public Correspondence (Marine Operator) S D 156.200 160.800 Public Correspondence (Marine Operator), US Government only, Coast Guard 156.150 S 156.200 Port operation, ship movement Pacific coast: Coast Guard, East Coast:
Commercial fishing D 156.250 160.850 Public Correspondence (Marine Operator), S S D 156.350 160.950 Public Correspondence (Marine Operator), Port operation, ship movement Port operation. VTS in Seattle Inter-ship Sefety 156.250 156.300 S S S 156.350 156.400 156.450 Port operation, ship movement Commercial Commercial (Inter-ship only) Boater Calling channel, Commercial &
Non-commercial (Recreational) Commercial Commercial. VTS in selected areas. Port operation. VTS in selected areas. Inter-ship Navigation Safety (Bridge-to-bridge) Port operation. VTS in selected areas. Commercial, non-commercial, ship movement (1 W) International Distress, Safety and Calling State Controlled (1 W)
156.750 Environmental (Receive only) 156.500 156.550 156.600 156.650 156.700 S S S S S S S S S D 156.900 161.500 Port operation, ship movement S D 156.950 161.550 Port operation, ship movement S S D 157.000 161.600 Canadian Coast Guard Only, US: Commercial Coast Guard 156.750 156.800 156.850 156.950 156.950 Commercial 156.900 International: port operations and shipment Port operation 157.000 S D 157.050 161.650 Port operation, ship movement S D 157.100 161.700 Port operation, ship movement S 157.100 157.050 U.S. Government Only, Canadian Coast Guard US and Canadian Coast Guard Liaison and Maritime Safety Information Broadcasts announced on channel 16 Page 62 GX2360S VHF MARINE CHANNEL CHART CHANNEL USE RX TX I S/D X 157.150 U.S. Government Only D 157.150 161.750 Public Correspondence (Marine Operator) S D 157.200 161.800 Public Correspondence (Marine Operator) D 157.250 161.850 Public Correspondence (Marine Operator) D 157.300 161.900 Public Correspondence (Marine Operator) D 157.350 161.950 Public Correspondence (Marine Operator) D 157.400 162.000 Public Correspondence (Marine Operator) D 156.025 160.625 Public Correspondence (Marine Operator) D 156.075 160.675 Public Correspondence (Marine Operator), Port operation, ship movement U.S. Government Only, Canadian Coast Guard-
Pacific Coast, Commercial Fishing-East Coast D 156.125 160.725 Public Correspondence (Marine Operator), D 156.175 160.775 Public Correspondence (Marine Operator), D 156.225 160.825 Public Correspondence (Marine Operator), Port operation, ship movement Public Coast: Coast Guard;
East Coast: commercial fishing only Port operation, ship movement Port Operation and Commercial. VTS in selected areas. Port operation, ship movement U.S. Government Only, Canadian Commercial Fishing D 156.275 160.875 Public Correspondence (Marine Operator), S D 156.325 160.925 Public Correspondence (Marine Operator), 156.275 Port operation, ship movement Port Opeations CH U C 23 X 23A X X 24 25 X X 26 X 27 28 X 60 61 X X X X X X 61A X X 62 62A 63 63A X 64 64A X 65 65A X 66 66A X X 67 68 69 70 71 72 73 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X S 156.075 S 156.125 S 156.175 S 156.225 S S S S S S S S 156.325 156.375 156.425 156.475 156.525 156.575 156.625 156.675 74 X X X S 156.725 Port operation, ship movement Port Operations US: Commercial. Used for Bridge-to-bridge com muni-cations in lower Mississippi River. Inter-ship only, Canada: Commercial fishing, S&R Non-commercial (Recreational) US: Non-commercial (Recreational), Canada: Commercial fishing only, International: Inter-ship, Port opertions and Ship movement Digital selective calling (voice communications not allowed) US, Canada: Non-commercial (Recreational), International: Port opertions and Ship movement Non-commercial (Inter-ship only) US: Port Operations, Canada: Commercial fish ing only, International: Inter-ship, Port opertions and Ship movement US: Port Operations, Canada: Commercial fishing only, International: Inter-ship, Port opertions and Ship movement GX2360S Page 63 X X X CH U C 75 76 77 77 78 X VHF MARINE CHANNEL CHART CHANNEL USE RX TX I S/D S S S S D 156.925 161.525 Public Correspondence (Marine Operator), Port Operations (Inter-ship only) (1W) Port Operations (Inter-ship only) (1W) Port Operations (Inter-ship only) (1W) Port Operations (Inter-ship only) 156.775 156.825 156.875 156.875 X X 78A X 79 79A X 80 80A X 81 81A X 82 82A X 83 83A X X X X X X X X X X X X X Port operation, ship-movement Non-commercial (Recreational) 156.975 156.925 S D 156.975 161.575 Port operation and Ship movement S D 157.025 161.625 Port operation, ship movement S D 157.075 161.675 Port operation, ship movement S Commercial Commercial 157.025 157.075 U.S. Government Only -
Environmental protection operations. D 157.125 161.725 Public Correspondence (Marine Operator), S 157.125 Port operation, ship movement U.S. Government Only, Canadian Coast Guard Only D 157.175 161.775 Canadian Coast Guard Only S 157.175 U.S. Government Only, Canadian Coast Guard Only 157.425 X X X X X X X X X X X X Commercial, Inter-ship Only 83 X 84 X 85 X 86 X 87 88 X 88A X WX01 X WX02 X WX03 X WX04 X WX05 X WX06 X WX07 X WX08 X WX09 X WX10 X The above BOLD channels are not for use of the general public in U.S. waters, unless proper authorization is given. D 157.175 161.775 Public Correspondence (Marine Operator) D 157.225 161.825 Public Correspondence (Marine Operator) D 157.275 161.875 Public Correspondence (Marine Operator) D 157.325 161.925 Public Correspondence (Marine Operator) D 157.375 161.975 Public Correspondence (Marine Operator) D 157.425 162.025 Public Correspondence (ship-to-coast) S D D D D D D D D D D 162.550 Weather (receive only) 162.400 Weather (receive only) 162.475 Weather (receive only) 162.425 Weather (receive only) 162.450 Weather (receive only) 162.500 Weather (receive only) 162.525 Weather (receive only) 161.650 Weather (receive only) 161.775 Weather (receive only) 163.275 Weather (receive only)
X X X X X X X X X X X X X X X X X X X X Page 64 GX2360S Channel designator Carrier frequency
(MHz) Ship transmit Coast transmit Points of communica-
tion (Intership and be-
tween coast and ship unless otherwise iandicated) Port Operations Channel designator Carrier frequency
(MHz) Ship transmit Coast transmit Points of communica-
tion (Intership and be-
tween coast and ship unless otherwise iandicated) Noncommercial 156.050 156.050 156.175 156.175 156.250 156.250 156.275 156.275 156.325 156.325 156.600 156.600 156.675 156.675 156.700 156.700 156.725 156.725 156.875 157.000 Intership only. Intership only. Navigational (Bridge-to-Bridge)5 156.650 156.650 156.375 156.375 Commercial 6817 0916 69 71 72 78A 79A 80A 6714 16 06
........ 156.425 156.425 156.450 156.450 156.475 156.475 156.575 156.575 156.625 156.925 156.925 156.975 156.975 Great Lakes only. 157.025 157.025 Do. 156.375 Distress, Safety and Calling 156.800 156.800 EPRIB Internship only. Intership only. ...... Intership Safety 156.300
........ a. Intership, or b. For SAR: Ship and aircraft for the U.S. Coast Guard. Intership only. ....... Do. 156.050 156.050 156.175 156.175 156.350 156.350 156.375 156.400 156.450 156.450 156.500 156.500 156.550 156.550 156.900 156.900 156.950 156.950 156.975 156.975 157.025 157.025 157.425 156.625 Digital Selective Calling 156.525 156.525
........ ....... Intership only. Internship only. Environmental 1513
........ 156.750 Coast to ship only. 179,10 22A11 Maritime Control 156.850 156.850 Liaison, U.S. Coast Guard 157.100 157.100 Ship, aircraft, and coast stations of the U.S. Coast G u a r d a n d a t Lake Mead, Nev., ship and coast stations of the N a t i o n a l P a r k S e r v i c e , U . S . Department of the Interior. 01A1 63A1 052 65A 66A 123 73 143 74 774 20A12 136 677 01A1 63A1 07A 677 08 09 10 113 18A 19A 79A 80A 88A8 7214 7015 1: 156.050 MHz and 156.175 MHz are available for port operations and commercial com-
munications purposes when used only within the U.S. Coast Guard designated Vessel Traffic Services (VTS) area of New Orleans, on the lower Mississippi River from the various pass entrances in the Gulf of Mexico to Devils Swamp Light at River Mile 242.4 above head of passes near Baton Rouge. 2: 156.250 MHz is available for port operations communications use only within the U.S. Coast Guard designated VTS radio protection areas of New Orleans and Houston de-
scribed in Sec. 80.383. 156.250 MHz is available for intership port operations communi-
cations used only within the area of Los Angeles and Long Beach harbors, within a 25-
nautical mile radius of Point Fermin, California. 3: 156.550 MHz, 156.600 MHz and 156.700 MHz are available in the U.S. Coast Guard designated port areas only for VTS communications and in the Great Lakes available primarily for communications relating to the movement of ships in sectors designated by the St. Lawrence Seaway Development Corporation or the U.S. Coast Guard. The use of these frequencies outside VTS and ship movement sector protected areas is permitted provided they cause no interference to VTS and ship movement communications in thier respective designated sectors. GX2360S Page 65 4: Use of 156.875 MHz is limited to communications with pilots regarding the movement and docking of ships. Normal output power must not exceed 1 watt. 5: 156.375 MHz and 156.650 MHz are available primarily for intership navigational commu-
nications. These frequencies are available between coast and ship on a secondary basis when used on or in the vicinity of locks or drawbridges. Normal output power must not exceed 1 watt. Maximum output power must not exceed 10 watts for coast stations or 25 watts for ship stations. 6: On the Great Lakes, in addition to bridge-to-bridge communications, 156.650 MHz is available for vessel control purposes in established vessel traffic systems. 156.650 MHz is not available for use in the Mississippi River from South Pass Lighted Whistle Buoy 2 and Southwest Pass entrance Midchannel Lighted Whistle Buoy to mile 242.4 above Head of Passes near Baton Rouge. Additionally it is not available for use in the Missis-
sippi River-Gulf Outlet, the Mississippi River-Gulf Outlet Canal, and the Inner Harbor Navigational Canal, except to aid the transition from these areas. 7: Use of 156.375 MHz is available for navigational communications only in the Mississippi River from South Pass Lighted Whistle Buoy 2 and Southwest Pass entrance Mid-
channel Lighted Whistle Buoy to mile 242.4 above head of Passes near Baton Rouge, and in addition over the full length of the Mississippi River-Gulf Outlet Canal from en-
trance to its junction with the Inner Harbor Navigation Canal, and over the ull length of the Inner Harbor Navigation Canal from its junction with the Mississippi River to its entry to Lake Pontchartrain at the New Seabrook vehicular bridge. 8: Within 120 km (75 miles) of the United States/Canada border, in the area of the Puget Sound and the Strait of Juan de Fuca and its approaches, 157.425 MHz is half of the duplex pair designated as Channel 88. In this area, Channel 88 is available to ship stations for communications with public coast stations only. More than 120 km (75 miles) from the United States/Canada border in the area of the Puget Sound and the Strait of Juan de Fuca, its approaches, the Great Lakes, and the St. Lawrence Seaway, 157.425 MHz is available for intership and commercial communications. Outside Puget Sound area and its approaches and the Great Lakes, 157.425 MHz is also available for commu-
nications between commercial fishing vessels and associated aircraft while engaged in commercial fishing activities. 9: When the frequency 156.850 MHz is authorized, it may be used additionally for search and rescue training exercises conducted by state or local governments. 10: The frequency 156.850 MHz is additionally available to coast stations on the Great Lakes for transmission of scheduled Coded Marine Weather Forecasts (MAFOR), Great Lakes Weather Broadcast (LAWEB) and nscheduled Notices to Mariners or Bulletins. F3C and J3C emissions are permitted. Coast Stations on the Great Lakes must cease weather broadcasts which cause interference to stations operating on 156.800 MHz until the interference problem is resolved. 11: The frequency 157.100 MHz is authorized for search and rescuetraining exercises by state or local government in conjunction with U.S. Coast Guard stations. Prior U.S. Coast Guard approval is required. Use must cease immediately on U.S. Coast Guard request. 12: The duplex pair for channel 20 (157.000/161.600 MHz) may be used for ship to coast station communications. 13: Available for assignment to coast stations, the use of which is in accord with an agreed program, for the broadcast of information to ship stations concerning the environmental conditions in which vessels operate, i.e., weather; sea conditions; time signals; notices to mariners; and hazards to navigation. 14: Available only in the Puget Sound and the Strait of Juan de Fuca. 15: The frequency 156.525 MHz is to be used exclusively for distress, safety and calling using digital selective calling techniques. No other uses are permitted. 16: The frequency 156.450 MHz is available for intership, ship and coast general purpose calling by noncommercial vessels, such as recreational boats and private coast stations. 17: The frequency 156.425 MHz is assigned by rule to private coast stations in Alaska for facsimile transmissions as well as voice communications. Page 66 GX2360S 12. WARRANTY Marine Products Limited Warranty STANDARD HORIZON (a division of VERTEX STANDARD) warrants, to the original purchaser only, each new Marine Communications Product (Product) manufactured and/or supplied by STANDARD HORIZON against defects in materials and workmanship under normal use and service for a period of time from the date of purchase as follows:
Fixed Mount and Portable Transceivers 1 year - if purchased before 01/01/91 3 years - if purchased between 01/01/91 and 01/01/94 3 years Waterproof - if purchased after 01/01/94 Loud hailers 1 year - if purchased before 01/01/91 3 years - if purchased after 01/01/91 Associated Chargers 1 year - if purchased before 01/01/91 3 years - if purchased after 01/01/91 Associated Batteries - 18 months. Note: Batteries will be deemed deflective only if storage capacity drops below 80% of rated capacity or if leakage devel-
ops. Associated Accessories - 1 year. Includes: Microphones/Handsets, External Speakers, Antennas, Carrying Accessories, Power Supplies, and Signaling Boards. To receive warranty service, the purchaser must deliver the Product, transpor-
tation and insurance prepaid, to STANDARD HORIZON (a division of VERTEX STANDARD), Attention Marine repairs 10900 Walker Street, Cypress, CA 90630. Include proof of purchase indicating model. serial number, and date of pur-
chase. STANDARD HORIZON will return the Product to the purchaser freight prepaid. Products purchased prior to January 1, 1991 will bear the STANDARD HORIZON warranty terms in effect prior to that date. In the event of a defect, malfunction or failure of the Product during the war-
ranty period, STANDARD HORIZONs liability for any breach of contract or any breach of express or implied warranties in connection with the sale of Products shall be limited solely to repair or replacement, at its option, of the Product or part(s) therein which, upon examination by STANDARD HORIZON, appear to be defective or not up to factory specifications. STANDARD HORIZON may, at its option, repair or replace parts or subassemblies with new or reconditioned GX2360S Page 67 parts and subassemblies. Parts thus repaired or replaced are warranted for the balance of the original applicable warranty. STANDARD HORIZON will not warrant installation, maintenance or service of the Products. In all instances, STANDARD HORIZONs liability for damages shall not exceed the purchase price of the defective Product. This warranty only extends to Products sold within the 50 States of the United States of America and the District of Columbia. STANDARD HORIZON will pay all labor to repair the product and replacement parts charges incurred in providing the warranty service except where purchaser abuse or other qualifying exceptions exist. The purchaser must pay any trans-
portation expenses incurred in returning the Product to STANDARD HORIZON for service. This limited warranty does not extend to any Product which has been subjected to misuse, neglect, accident, incorrect wiring by anyone other than STANDARD HORIZON, improper installation, or subjected to use in violation of instructions furnished by STANDARD HORIZON, nor does this warranty extend to Prod-
ucts on which the serial number has been removed, defaced, or changed. STAN-
DARD HORIZON cannot be responsible in any way for ancillary equipment not furnished by STANDARD HORIZON which is attached to or used in connection with STANDARD HORIZONs Products, or for the operation of the Product with any ancillary equipment, and all such equipment is expressly excluded from this warranty. STANDARD HORIZON disclaims liability for range, coverage, or operation of the Product and ancillary equipment as a whole under this war-
ranty. STANDARD HORIZON reserves the right to make changes or improve-
ments in Products, during subsequent production, without incurring the obliga-
tion to install such changes or improvements on previously manufactured Prod-
ucts. The implied warranties which the law imposes on the sale of this Product are expressly LIMITED, in duration, to the time period specified above. STANDARD HORIZON shall not be liable under any circumstances for consequential dam-
ages resulting from the use and operation of this Product, or from the breach of this LIMITED WARRANTY, any implied warranties, or any contract with STAN-
DARD HORIZON. IN CONNECTION WITH THE SALE OF ITS PRODUCTS, STANDARD HORIZON MAKES NO WARRANTIES, EXPRESS OR IMPLIED AS TO THE MERCHANTABILITY OR FITNESS FOR A PARTICULAR PUR-
POSE OR OTHERWISE, EXCEPT AS EXPRESSLY SET FORTH HEREIN. Page 68 GX2360S Some states do not allow the exclusion or limitation of incidental or consequen-
tial damages, or limitation on how long an implied warranty lasts, so the above limitations or exclusions may not apply. This warranty gives specific legal rights, and there may be other rights which may vary from state to state. ONLY PRODUCTS SOLD ON OR AFTER JANUARY 1, 1991 ARE COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY. ON-LINE WARRANTY REGISTRATION THANK YOU for buying STANDARD HORIZON (a division of Vertex Stan-
dard) products! We are confident your new radio will serve your needs for many years!
Please visit www.standardhorizon.com to register the QUANTUM Ma-
rine VHF. It should be noted that visiting the Web site from time to time may be beneficial to you, as new products are released they will appear on the STANDARD HORIZON Web site. Also a statement regarding prod-
uct support should be added to the manual. Product Support Inquiries If you have any questions or comments regarding the use of the QUAN-
TUM, you can visit the STANDARD HORIZON Web site to send an E-
Mail or contact the Product Support team at (714) 827-7600 ext 6300 M-
F 7:00-5:00PST. In addition to the warranty, STANDARD HORIZON includes a lifetime flat rate program to provide service after the warranty period has ex-
pired. If you wish to obtain the flat rate price for out-of-warranty repair, you must include the information on the Owners Record with the unit when you return it to your Dealer or to STANDARD HORIZON. Lifetime Flat Rate Service Program: For the original Owner only, for the lifetime of the unit, STANDARD HORIZON will repair the unit to original specifications. Note: The flat rate amount is payable by the Owner only if STANDARD HORIZON or the STANDARD HORIZON Dealer determines that a re-
pair is needed. After the repair, a 90-day warranty will be in effect from the date of return of the unit to the Owner. This service program is not available for equipment which has failed as a result of neglect, accident, breakage, misuse, improper installation or modification, or water damage (depending on the product). GX2360S Page 69 13 SPECIFICATIONS Performance specifications are nominal, unless otherwise indicated, and are subject to change without notice. 13.1 GENERAL Channels............................................... All USA, International and Canadian Input Voltage ........................................................................ 13.8 VDC 20%
Current Drain Standby ........................................................................................... 0.5 A Receive........................................................................................... 1.5 A Transmit ................................................................... 5.0 A (Hi); 1.5 A (Lo) Dimensions ................................................... 3-1/4 H x 7-1/4 W x 6-5/16 D
(83 H x 184 W x 135 D mm) Flush-Mount Dimensions ................................. 2-5/8 H x 6-5/8 W x 5-1/8 D
(67 H x 168 W x 130 D mm) Weight ..................................................................................... 2.2 lbs (1 kg) 13.2 TRANSMITTER Frequency Range .................................................... 156.025 to 157.425 MHz RF Output ...................................................................... 25 W (Hi); 1 W (Lo) Conducted Spurious Emissions ................................... 80 dB (Hi); 60 dB (Lo) Audio Response ................................................ within +1/-3 of a 6 dB/octave pre-emphasis characteristic at 300 to 3000 Hz Audio Distortion ...................................................................................... 5 %
Modulation ...................................................... 16K0G3E, for DSC 16K0G2B Frequency Stability (-20C to +50C) .............................................. 0.0005%
FM Hum and Noise ............................................................................. 50 dB 13.3 RECEIVER Frequency Range .................................................... 156.050 to 163.275 MHz Sensitivity 20 dB Quieting ............................................................................ 0.35 V 12 dB SINAD ............................................................................... 0.25 V Squelch Sensitivity (Threshold) .................................................... 0.13 V Modulation Acceptance Bandwidth................................................... 7.5 kHz Selectivity Spurious and Image Rejection ...................................... better than -70 dB Intermodulation and Rejection at 12 dB SINAD ............. better than -70 dB Audio Output ....................................................................................... 4.5 W Audio Response .............................................. within + 2/8 of a 6 dB/octave de-emphasis characteristic at 300 to 3000 Hz Frequency Stability (-20C to +50C) ............................................. 0.0005 %
Channel Spacing ................................................................................ 25 kHz DSC Format ............................................................................. RTCMSC101 NMEA Input/Output ......................................................... Output - DSC, DSE Input - GLL, GGA, RMC and GNS Page 70 GX2360S MEMO GX2360S Page 71 Marine Division of VERTEX STANDARD US Headquarters 10900 Walker Street, Cypress, CA 90630, U.S.A. www. standardhorizon.com E M 0 0 4 N 1 0 0 Page 72 Copyright 2003 VERTEX STANDARD CO., LTD. All rights reserved. No portion of this manual may be reproduced without the permission of VERTEX STANDARD CO., LTD. 0306R-0Y GX2360S
| frequency | equipment class | purpose | ||
|---|---|---|---|---|
| 1 | 2003-10-17 | 156 ~ 163.275 | GVH - Part 80 VHF Transmitter (GMDSS) | Original Equipment |
| app s | Applicant Information | |||||
|---|---|---|---|---|---|---|
| 1 | Effective |
2003-10-17
|
||||
| 1 | Applicant's complete, legal business name |
Yaesu Musen Co., Ltd.
|
||||
| 1 | FCC Registration Number (FRN) |
0013655220
|
||||
| 1 | Physical Address |
Tennozu Parkside Building
|
||||
| 1 |
Tokyo, N/A 140-0002
|
|||||
| 1 |
Japan
|
|||||
| app s | TCB Information | |||||
| 1 | TCB Application Email Address |
T******@TIMCOENGR.COM
|
||||
| 1 | TCB Scope |
B3: Maritime & Aviation Radio Services equipment in 47 CFR parts 80 & 87
|
||||
| app s | FCC ID | |||||
| 1 | Grantee Code |
K66
|
||||
| 1 | Equipment Product Code |
30043X30
|
||||
| app s | Person at the applicant's address to receive grant or for contact | |||||
| 1 | Name |
K******** T********
|
||||
| 1 | Title |
Engineering Division/Quality Assurance Leader
|
||||
| 1 | Telephone Number |
81-3-********
|
||||
| 1 | Fax Number |
81-3-********
|
||||
| 1 |
k******@yaesu.com
|
|||||
| app s | Technical Contact | |||||
| n/a | ||||||
| app s | Non Technical Contact | |||||
| n/a | ||||||
| app s | Confidentiality (long or short term) | |||||
| 1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
| if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
| app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
| 1 | Is this application for software defined/cognitive radio authorization? | No | ||||
| 1 | Equipment Class | GVH - Part 80 VHF Transmitter (GMDSS) | ||||
| 1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 25 Watts VHF/ FM Marine Transceiver | ||||
| 1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
| 1 | Modular Equipment Type | Does not apply | ||||
| 1 | Purpose / Application is for | Original Equipment | ||||
| 1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
| 1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
| 1 | Grant Comments | Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 50cm from all persons and must not exceed an antenna gain of 0 dBd. | ||||
| 1 | Is there an equipment authorization waiver associated with this application? | No | ||||
| 1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
| app s | Test Firm Name and Contact Information | |||||
| 1 | Firm Name |
M. Flom Associates, Inc.
|
||||
| 1 | Name |
M******** F******
|
||||
| 1 | Telephone Number |
480-9********
|
||||
| 1 | Fax Number |
480-9********
|
||||
| 1 |
i******@mflom.com
|
|||||
| Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 1 | 1 | 80.1101(c)(4) | CS GM | 156 | 163.275 | 1 | 5 ppm | 16K0F3E | |||||||||||||||||||||||||||||||||
| 1 | 2 | 80.1101(c)(4) | CS GM | 156 | 163.275 | 25 | 5 ppm | 16K0F3E | |||||||||||||||||||||||||||||||||
| 1 | 3 | 80.1101(c)(4) | CS GM | 156 | 163.275 | 1 | 5 ppm | 16K0G3E | |||||||||||||||||||||||||||||||||
| 1 | 4 | 80.1101(c)(4) | CS GM | 156 | 163.275 | 25 | 5 ppm | 16K0G3E | |||||||||||||||||||||||||||||||||
| 1 | 5 | 80.1101(c)(4) | CS GM | 156 | 163.275 | 1 | 5 ppm | 16K0G2B | |||||||||||||||||||||||||||||||||
| 1 | 6 | 80.1101(c)(4) | CS GM | 156 | 163.275 | 25 | 5 ppm | 16K0G2B | |||||||||||||||||||||||||||||||||
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC