FCC Part 68 Warning:
A
1.This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is
a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be
provided to the telephone company.
2.A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules
and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to
a compatible modular jack that is also compliant. See installation instructions for details.
3.If this equipment [US: T2LIPNANBTH58 causes harm to the telephone network, the telephone company will notify you in advance that temporary
discontinuance of service may be required. But if advance notice isn't practical, the telephone company will notify the customer as soon as possible.
Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.
4.The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this
happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.
5.If trouble is experienced with this equipment [US: T2LIPNANBTH58], for repair or warranty information, Service can be facilitated through our office at:
U.S. Agent Company name: 888VoIP / American Technologies, LLC
Address: 611 Jamison Rd Suite 1059 Elma NY 14059 USA
Tel: 716-714-8002
If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.
6.Please follow instructions for repairing if any (e.g. battery replacement section); otherwise do not alternate or repair any parts of device except specified.
For repair procedures, follow the instructions outlined under the limited warranty.
7.Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information.
8.If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this [US: T2LIPNANBTH58] does not disable your alarm
equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.
9.If the telephone company requests information on what equipment is connected to their lines, inform them of:
a)The ringer equivalence number [NAN]
b)The USOC jack required [N/A]
c)Facility Interface Codes (“FIC”) [N/A]
d)Service Order Codes (“SOC”) [N/A]
e)The FCC Registration Number [US: T2LIPNANBTH58]
10.The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not
ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be
connected to a line, as determined by the total RENs, contact the local telephone company. The REN for this product is part of the product identifier that has the
format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point. For this product the FCC Registration number is
[US: T2LIPNANBTH58] indicates the REN would be NAN.
12.We suggest the customers use a surge arrestor to protect the device.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B d igital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Features
硬件介绍 | Funktionen | Caracteristicas | Fonctionnalités
Hookswitch Key
摘挂机键
Gabelschaltertaste
Tecla Hookswitch
Touche commutateur
LED Indicator
LED 指示灯
LED-Anzeige
Indicador LED
Voyant LED
Mute Key
静音键Stummschalttaste
Tecla Mute
Touche muet
Microphone
麦克风Mikrofon
Micrófono
Microphone
Speaker
扬声器Lautsprecher
Altavoz
Haut-parleur
Volume Control Keys
音量加减键
Lautstärketasten
Teclas de control de volumen
Touches de contrôle du volume
Charging Contacts
充电接口
Ladekontakte
Contactos de carga
Contacts de charge
B
Charge the Handset
C
Pair & Connect with Your IP Phone
ENGLISH
| Aufladen des Mobilteils | Cargue el auricular | Charger le combiné
充电
Solid red: charging
红灯常亮:充电中
Dauerhaft rot: wird geladen
Rojo fijo: cargando
Rouge fixe : en cours de chargement
Solid green: full charge
绿灯常亮:充满电
Dauerhaft grün: vollständig geladen
Verde fijo: carga completa
Vert fixe : pleine charge
1. Place the handset on the phone handset cradle.
2. Follow the on-screen prompts to connect BTH58 to your phone.
配对和连接 IP 话机
1. 将手柄放到话机的手柄槽上。
2. 根据屏幕提示连接话机和手柄。
Koppeln und Verbinden mit Ihrem IP-Telefon
1. Legen Sie das Mobilteil in die Ladestation.
2. Folgen Sie den Anweisungen auf dem Bildschirm, um das BTH58 an Ihr Telefon
anzuschließen.
Emparejar y conectar con su teléfono IP
1. Coloque el auricular en la base del auricular del teléfono.
2. Siga las instrucciones de la pantalla para conectar BTH58 a su teléfono.
Appairer et connecter votre téléphone IP
1. Placez le combiné sur le socle du combiné du téléphone.
2. Suivez les invites à l'écran pour connecter BTH58 à votre téléphone.
简体中文
DEUTSCH
ESPAÑOL
FRANÇAIS
Regulatory Notices
Operating Ambient Temperatures
• Operating temperature: +32 to 104°F (0 to 40°C)
• Relative humidity: 5% to 90%, noncondensing
• Storage temperature: -22 to +160°F (-30 to +70°C)
Warranty
Our product warranty is limited only to the unit itself, when used normally in accordance with
the operating instructions and the system environment. We are not liable for damage or loss
resulting from the use of this product, or for any claim from a third party. We are not liable for
problems with Yealink device arising from the use of this product; we are not liable for financial
damages, lost profits, claims from third parties, etc., arising from the use of this product.
Explanation of the symbols
• DC symbol
is the DC voltage symbol.
• WEEE Warning symbol
To avoid the potential effects on the environment and human health as a result of the
presence of hazardous substances in electrical and electronic equipment, end users of
electrical and electronic equipment should understand the meaning of the crossed-out
wheeled bin symbol. Do not dispose of WEEE as unsorted municipal waste and have to collect
sunlight.
such WEEE separately.
Restriction of Hazardous Substances Directive (RoHS)
This device complies with the requirements of the EU RoHS Directive. Statements of
compliance can be obtained by contacting support@yealink.com.
Safety Instructions
Save these instructions. Read these safety instructions before use!
General Requirements
• Before you install and use the device, read the safety instructions carefully and observe
the situation during operation.
• During the process of storage, transportation, and operation, please always keep the
device dry and clean, avoid collision and crash.
• Please attempt not to dismantle the device by yourself. In case of any discrepancy,
please contact the appointed maintenance center for repair.
• Please refer to the relevant laws and statutes while using the device. Legal rights of
others should be respected as well.
Environmental Requirements
• Place the device at a well-ventilated place. Do not expose the device under direct
• Keep the device dry and free of dusts.
• Do not place the device on or near any inflammable or fire-vulnerable object, such as
Declaration of Conformity
We,
YEALINK(XIAMEN) NETWORK TECHNOLOGY
CO.,LTD
Address: 309, 3rd Floor, No.16, Yun Ding North Road,
Huli District, Xiamen City, Fujian, P.R.C
M a n u fa c t u r e r : Y E A L I N K ( X I A M E N ) N E T W O R K
TECHNOLOGY CO.,LTD
Address: 309, 3rd Floor, No.16, Yun Ding North Road,
Huli District, Xiamen City, Fujian, P.R.C
CE DATE: 20th /July/2021
declare that the product
Type: Bluetooth Handset
Model: BTH58
meets the essential requirements and other relevant
provisions according to the following EC directive
Directive: RED 2014/53/EU
YEALINK (XIAMEN) NETWORK TECHNOLOGY CO.,LTD
WWW.YEALINK.COM
ETSI EN 301 489-1 V2.2.0,
ETSI EN 301 489-17 V3.2.0,
Radio:ETSI EN 300 328 V2.1.1;
Health :EN 62479:2010;
Directive 2011/65/EU and (EU)2015/863 of the
European Parliament and of the Council of 8 June 2011
and 4 June 2015 on the restriction of the use of certain
hazardous substances in electrical and electronic
equipment(RoHS 2.0)
Directive 2012/19/EU of the European Parliament and
of the Council of 4.July.2012 on Waste electrical and
electronic equipment(WEEE)
Regulation (EC) No.1907/2006 of the European
Parliament and of the Council of 18.December.2006 on
Registration, Evaluation, Authorization, and Restriction
of Chemicals (REACH)
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage;
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.NMB-3(B)
2.This device meets CS03 Part V.
‘’This device meets the applicable Innovation, Science and Economic Development
Canada technical specifications. / Ce produit répond à la innovation, des sciences
et de .Développement économique Canada spécifications techniques applicables.”
Radiation Exposure Statement
This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled
environment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps qu’aucune autre
antenne ou émetteur.
Conformity
The product complies with the following standards:
Safety:EN 62368-1:2014
EMC: EN 55032:2015+AC:2016,
EN 55035:2017,
NAME: Stone Lu
DATE: 22/ Jan /2021
TITLE: Vice President
430104001463
Contact Information
YEALINK NETWORK TECHNOLOGY CO.,LTD.
309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, P.R.C
YEALINK (EUROPE) NETWORK TECHNOLOGY B.V.
Strawinskylaan 3127, Atrium Building, 8th floor, 1077ZX Amsterdam, The Netherlands
YEALINK (USA) NETWORK TECHNOLOGY CO., LTD.
999 Peachtree Street Suite 2300, Fulton, Atlanta, GA, 30309, USA
Made in China
2. Connect it to another wall outlet.
The usage environment is out of operating temperature range.
1. Use in the operating temperature range.
The cable between the unit and the Yealink device is connected incorrectly.
1. Connect the cable correctly.
You cannot connect the cable properly.
1. You may have connected a wrong Yealink device.
2. Use the correct power supply.
Some dust, etc., may be in the port.
1. Clean the port.
Contact your dealer or authorized service facility for any further questions.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
IC Statement
1.This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to
the following two conditions:
(1) this device may not cause interference; and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device. CAN ICES-3(B)
disconnect the grounding cable until you disconnect all other cables.
Battery Requirements
• Do not immerse the battery into water, which could short-circuit and damage the battery.
• Do not expose the battery to an open flame or leave the battery where it could be
subjected to extremely high temperatures, which could cause the battery to explode.
• Do power the handset off before removing the battery.
• Do not try to use the battery for the power supply of any device other than this handset.
• Do not open or mutilate the battery, released electrolyte is corrosive and may cause
damage to your eyes or skin.
• Use only the rechargeable battery pack delivered with the handset or those
rechargeable battery packs expressly recommended by Yealink.
• Defective or exhausted battery should never be disposed of as municipal waste. Return
old battery to the battery supplier, a licensed battery dealer or a designated collection
facility.
Cleaning Requirements
• Before cleaning the device, disconnect it from the power supply.
• Use a piece of soft, dry and anti-static cloth to clean the device.
• Keep the power plug clean and dry.
Troubleshooting
The unit cannot supply power to Yealink device.
There is a bad connection with the plug.
1. Clean the plug with a dry cloth.
• Keep the device away from any heat source or bare fire, such as a candle or an electric
rubber-made materials.
heater.
Operating Requirements
• Do not let a child operate the device without guidance.
• Do not let a child play with the device or any accessory in case of accidental swallowing.
• Please use the accessories provided or authorized by the manufacturer only.
• The power supply of the device shall meet the requirements of the input voltage of the
device. Please use the provided surge protection power socket only.
• Before plugging or unplugging any cable, make sure that your hands are completely dry.
• Do not spill liquid of any kind on the product or use the equipment near water, for
example, near a bathtub, washbowl, kitchen sink, wet basement or near a swimming
pool.
• During a thunderstorm, stop using the device and disconnect it from the power supply.
Unplug the power plug and the Asymmetric Digital Subscriber Line (ADSL) twisted pair
(the radio frequency cable) to avoid lightning strike.
• If the device is left unused for a rather long time, disconnect it from the power supply
and unplug the power plug.
• When there is smoke emitted from the device, or some abnormal noise or smell,
disconnect the device from the power supply, and unplug the power plug immediately.
• Contact the specified maintenance center for repair.
• Do not insert any object into equipment slots that is not part of the product or auxiliary
product.
• Before connecting a cable, connect the grounding cable of the device first. Do not
Copyright©2020 YEALINK(XIAMEN) NETWORK TECHNOLOGYCO.,LTD.All rights reserved.
BTH58 Bluetooth Handset
Quick Start Guide
快速入门指南 | Erste Schritte | Guía de inicio rápido | Guide de démarrage rapide
V1.0