FCC ID: T2C-T27G IP Phone

Enterprise IP Phone SIP-T27P Quick Start Guide(V80.1) www.yealink.com Applies to firmware version 45.80.0.1 or later. Packaging Contents The following items are included in your package. If you find anything missing, contact your system administrator. Handset Cord Ethernet Cable Stand IP Phone Handset Quick Start Guide Power Adapter Optional Wall Mount Bracket Optional Note: The models displayed on the phone differ from each other. The packaging content "IP Phone" listed above takes a SIP-T27G IP phone as an example. Assembling the Phone 1. Attach the stand, as shown below:

A B Desk Mount Method Note: You can also mount the phone to a wall. For more information on how to attach the wall mount bracket, refer to Yealink Wall Mount Quick Installation Guide for Yealink IP Phones. 2. Connect the handset and optional headset, as shown below:

Note: The headset and wireless headset adapter EHS36 should be purchased separately. The EXT port can also be used to connect the expansion module EXP39. For more information on how to use the EHS36 and EXP39, refer to Yealink EHS36 User Guide, Yealink EXP39 User Guide. Wireless Headset Adapter EHS36 1 3. Connect the network and power, as shown below:

You have two options for network and power connections. Your system administrator will advise you on which one to use. PC Connection

(Optional) Power Adapter

(DC 5V) A AC Power Option B PoE ( Power over Ethernet ) Option PC Connection

(Optional) IEEE 802.3af compliant PoE Hub/Switch Note: If inline power (PoE) is provided, you dont need to connect the power adapter. Make sure the hub/switch is PoE-compliant. Startup After the IP phone is connected to the network and supplied with power, it automatically begins the initialization process. After startup, the phone is ready for use. You can configure the phone via phone user interface or web user interface. 2 Configuring Your Phone Configuring via web user interface Accessing the web user interface:

1. Press the OK key when the phone is idle to obtain the IP address of the phone. 2. Open a web browser on your computer, enter the IP address into the address bar (e.g., "http://192.168.0.10"

or "192.168.0.10") and then press Enter. 3. Enter the user name (default: admin) and password (default: admin) in the login page and click Confirm. Network Settings: Click on Network->Basic->IPv4 Config You can configure the network settings in the following ways:

DHCP: By default, the phone attempts to contact a DHCP server in your network to obtain its valid network settings, Static IP Address: If your phone cannot contact a DHCP server for any reason, you need to configure the IP address, subnet mask, gateway address, primary DNS address and secondary DNS address for the phone manually. e.g., IP address, subnet mask, gateway address and DNS address. PPPoE: If you are using an xDSL modem, you can connect your phone to the Internet via PPPoE mode. Contact the ITSP for the account and password. Note: The IP phone also supports IPv6, but IPv6 is disabled by default. Wrong network settings may result in the inaccessibility of your phone and may have an impact on the network performance. Contact your system administrator for more information. Account Settings: Click on Account->Register->Account X (X=1,2,3,4,5,6) Parameters of the account:

Register Status:

Line Active:

Label:

Display Name:

User Name:

Register Name:

Password:

Server Host:

It shows the register status of the current account. You can select Enabled/Disabled to enable/disable the account. It is shown on the LCD screen to identify the account. It is shown as caller ID when placing a call. It is provided by ITSP for registration (required). It is an authenticated ID for authentication provided by ITSP (required). It is provided by ITSP for registration (required). It is provided by ITSP for registration (required). Register status icons on the LCD screen:

Registered Register Failed Registering Note: Check with your system administrator if any error appears during the registration process or a specific configuration is required for your registration. Configuring via phone user interface Network Settings:

Press the Menu soft key when the phone is idle, select Settings->Advanced Settings (default password: admin)->Network->

WAN Port/VLAN/Webserver Type/802.1x Settings/VPN/LLDP/CDP/NAT to configure the network. Account Settings:

Press the Menu soft key when the phone is idle, select Settings->Advanced Settings (default password: admin)->Accounts to configure the account. Note: For more information on account parameters, refer to Configuring via web user interface. 3 Basic Call Features Placing a Call Using the handset:

1. Pick up the handset. 2. Enter the number, and then press the Send soft key. Using the speakerphone:

1. With the handset on-hook, press . 2. Enter the number, and then press the Send soft key. Using the headset:

1. With the headset connected, press to activate the headset mode. 2. Enter the number, and then press the Send soft key. Note: During a call, you can alternate between the headset, hands-free speakerphone and handset modes by pressing the HEADSET key, the Speakerphone key or by picking up the handset. Headset mode requires a connected headset. Answering a Call Using the handset:

Pick up the handset. Using the speakerphone:

Press . Using the headset:

Press . Note: You can reject an incoming call by pressing the Reject soft key. Ending a Call Using the handset:

Hang up the handset or press the EndCall soft key. Using the speakerphone:

Press or the EndCall soft key. Using the headset:

Press the EndCall soft key. Redial Press to enter the Placed Calls list, press or to select the desired entry, and then press or the Send soft key. Press twice when the phone is idle to dial out the last dialed number. Call Mute and Un-mute Press to mute the microphone during a call. Press again to un-mute the call. Call Hold and Resume To place a call on hold:

Press or the Hold soft key during an active call. To resume the call, do one of the following:

If there is only one call on hold, press or the Resume soft key. 4 If there is more than one call on hold, press or to select the desired call, and then press or the Resume soft key. Call Transfer You can transfer a call in the following ways:

Blind Transfer 1. Press or the Tran soft key during an active call. The call is placed on hold. 2. Enter the number you want to transfer to. 3. Press or the Tran soft key. Semi-Attended Transfer 1. Press or the Tran soft key during an active call. The call is placed on hold. 2. Enter the number you want to transfer to, and then press . 3. Press or the Tran soft key when you hear the ring-back tone. Attended Transfer 1. Press or the Tran soft key during an active call. The call is placed on hold. 2. Enter the number you want to transfer to, and then press . 3. Press or the Tran soft key when the second party answers. Call Forward To enable call forward:

1. Press the Menu soft key when the phone is idle, and then select Features->Call Forward. 2. Select the desired forward type:

Always Forward----Incoming calls are forwarded unconditionally. Busy Forward----Incoming calls are forwarded when the phone is busy. No Answer Forward----Incoming calls are forwarded if not answered after a period of time. 3. Enter the number you want to forward to. For No Answer Forward, press or to select the desired ring time to wait before forwarding in the After Ring Time field. 4. Press the Save soft key to accept the change. Call Conference 1. Press or the Conf soft key during an active call. The call is placed on hold. 2. Enter the number of the second party, and then press the Send soft key. 3. Press or the Conf soft key again when the second party answers. All parties are now joined in the conference. 4. Press the EndCall soft key to disconnect all parties. Note: You can split the conference call into two individual calls by pressing the Split soft key. Speed Dial To configure a speed dial key:

1. Press the Menu soft key when the phone is idle, and then select Features->DSS Keys. 2. Select the desired DSS key, and then press the Enter soft key. 3. Select Speed Dial from the Type field, select the desired line from the Account ID field, enter a label in the Label field and enter the number in the Value field. 4. Press the Save soft key to accept the change. To use the speed dial key:

Press the speed dial key to dial out the preset number. 5 Voice Message Message waiting indicator on the idle screen indicates that one or more voice messages are waiting at the message center. The power indicator LED slowly flashes red. To listen to voice messages:

1. Press or the Connect soft key. 2. Follow the voice prompts to listen to your voice messages. Customizing Your Phone Call History 1. Press the History soft key when the phone is idle, press or to scroll through the list. 2. Select an entry from the list, you can do the following:

Press the Send soft key to call the entry. Press the Delete soft key to delete the entry from the list. If you press the Option soft key, you can also do the following:

Select Detail to view detailed information about the entry. Select Add to Contacts to add the entry to the local directory. Select Add to Blacklist to add the entry to the blacklist. Select Delete All to delete all entries from the list. Contact Directory To add a contact:

1. Press the Dir soft key when the phone is idle, and then select the desired group. 2. Press the Add soft key to add a contact. 3. Enter a unique contact name in the Name field and contact numbers in the corresponding fields. 4. Press the Add soft key to accept the change. To edit a contact:

1. Press the Dir soft key when the phone is idle, and then select the desired group. 2. Press or to select the desired contact, press the Option soft key and then select Detail from the prompt list. 3. Edit the contact information. 4. Press the Save soft key to accept the change. To delete a contact:

1. Press the Dir soft key when the phone is idle, and then select the desired group. 2. Press or to select the desired contact, press the Option soft key and then select Delete from the prompt list. 3. Press the OK soft key when the LCD screen prompts Delete selected item?. Note: You can add contacts from call history easily. For more information, refer to Call History above. Volume Adjustment Press during a call to adjust the receiver volume of the handset/speakerphone/headset. Press when the phone is idle to adjust the ringer volume. Ring Tones 1. Press the Menu soft key when the phone is idle, and then select Settings->Basic Settings->Sound->Ring Tones. 2. Press or to select Common or the desired account and then press the Enter soft key. 3. Press or to select the desired ring tone. 4. Press the Save soft key to accept the change. 6 About us Founded in 2001, Yealink, the global TOP 3 SIP phone provider and a leading provider of VoIP Phone and IP communication solutions, has been focusing on VoIP products characterized by reliable quality, easy deployment and affordable price for more than a decade. Today, customers from over 140 countries rely on Yealink as the backbone of global collaboration to extend the value of network communications. More about Yealink Since 2001, Yealink has continued to develop state-of-the art, hi-tech VoIP communication terminals that include IP video phones, IP phones and USB phones. With a worldwide market in more than 140 countries, the company has also established a first-class international service network. Our priorities are quality, functionality, ease-of-use, customer support and competitive pricing. To provide new solutions for the future in this fast-evolving sector, Yealinks large, talented and highly-experienced VoIP R&D team is totally committed to the pursuit of excellence. To date, we have passed more than 80 interoperability tests and meet certification requirements set by leading VoIP system and platforms. Yealink works in close partnership with T-Mobile, Telefonica, Portugal Telecom and other leading telecommunication service providers. YEALINK NETWORK TECHNOLOGY CO., LTD. Email: sales@yealink.com Web: www.yealink.com



Anychangesormodificationsnotexpresslyapprovedbythepartyresponsiblefor 

compliancecouldvoidtheuser'sauthoritytooperatetheequipment.   

 

Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothefollowingtwo 

conditions:(1)Thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemustaccept

anyinterferencereceived,includinginterferencethatmaycauseundesiredoperation.  

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.



Yealink (Xiamen) Network Technology Co.,Ltd. 4th-5th Floor, South Building,NO.63 WangHai Road, 2nd Software Park, Xiamen, China Tel: 0592-5702000 Fax: 0592-5702455 12/17/2014 FCC Confidential Authorization FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Confidentiality Request regarding application for certification of FCC ID: T2C-T27G Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Block Diagram--- (Long term)

Circuit Description--- (Long term)

Detailed Circuit Schematics of EUT--- (Long term) The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the grant for this application. Sincerely Yours, Signature:

Stone Lu Vice General Manager

EXHIBIT A - FCC ID LABELING AND LOCATION FCC ID Label FCC ID Label Location The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)