- Plug in the Sony Unilink cable (one side is round this side to the Sony, the other is square this side to the PhatBox).
- Attach the RCA cable (one side to the PhatBox, the other side to the BUS AUDIO IN jack on the Sony) Connect the Sony unit to power:
+ plug in the square power connector to the Sony head unit. The other end will plug into the 12 V DC power supply make sure you match RED/BLACK with the colors on the power supply.
= Plug the power supply into a wall outlet
- Flipping the power switch on the 12 V DC power supply will power the entire system. Connect Speakers
- Plug speaker RCA jacks into the Sony Car Stereo jack labeled AUDIO OUT FRONT
= Plug your speakers into an external power supply, Fr re:
- Turn the unit on by flipping the power switch on the DC power supply.
- When the Sony unit lights up, press the red button in the upper right comer of the face to flip down the control panel
~ Press the source button twice (or until it switches from radio to CD2)
- You should see LOAD blinking on the screen The PhatBox sends this message to indicate that it is loading up
+ When LOAD stops blinking, you should begin to hear music from your speakers. You can change songs by using TRACK UP/TRACK DOWN of DISC UP/DISC DOWN buttons on the control panel or the remote control note that you can press the CLOSE button on the contrel panel to see the cool LED display the remote control is the only way to change songs in this mode.
- You can tum off the unit at any time by flipping the switch on the DC power supply. Warning:
- Don't pull out the cartridge while the unit is on turn off the power supply first.