CGO3 USER MANUAL INTRODUCTION CGO3 (available separately) is an innovative combination of 3-axis brushless gimbal, camera and digital video downlink. The Self-Stabilizing gimbal makes it possible to capture amazing photographs and video footage for an array of uses. And the built-in digital video link delivers streaming video to 5.8GHz WiFi compatible iOS and Android equipped devices including smart-phones and tablets as well as YUNEEC Personal Ground Stations. OPERATING INSTRUCTIONS:
(1) Insert the micro SD card into CGO3, plug in the power cord and slide the power switch, then CGO3 start to work;
(2) When the green light starts to ash , it indicates that wi has started to work. At this time, you can take device to connect to CGO3's wi, when the device is connected, the light will grow solid green.
(3) Then press the shutter button, CGO3 will take a picture; long press the shutter button, CGO3 will enter recording function;
(4) Toggle the switch ,then CGO3 will be powered o. OPERATION
(1) Plug the 3-Pin power cord into the appropriate socket head.
(2) Install the gimbal under the belly of plane.
(3) Power on the plane, then gimbal will work. FCC STATEMENT:
This equipment has been tested and found to comply with the limits for Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a resi-
dential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be deter-
mined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit dierent from that to which the receiver is con-
nected. This device complies with part 15 of the FCC rules. Operation is subject to the following two condi-
tions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable pro-
tection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is con-
nected. Consult the dealer or an experienced radio/TV technician for help. CAUTION: Any changes or modications not expressly approved by the party responsible for com-
pliance could void the user's authority to operate this equipment. RF EXPOSURE WARNING This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. IC RADIATION EXPOSURE STATEMENT FOR CANADA This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired opera-
tion of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolec-
trique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. This equipment complies with IC RSS-102 radiation exposure limit set forth for an uncontrolled environment. Cet quipement respecte les limites d'exposition aux rayonnements IC dnies pour un environne-
ment non contrl