157g 180 x 120mm Pantone 802 C Disclaimer and Safety Precautions V1.0 Disclaimer Yuneec International (China) Co., Ltd shall not be held liable for any damage, injury or for use of the product in violation with legal regulations, especially in the following circumstances:
Damage and/or injury as well violation of legal regulations resulting from a failure to comply with the operating instruc-
tions or the instructions at www.yuneec.com, product infor-
mation, user manual and other legally binding information;
Damage and/or injury as well violation of legal regulations brought about by the inuence of alcohol, drugs, medication or other narcotics which may impact on the concentration of the user;
The same applies to illnesses effecting the concentration of the user (dizziness, tiredness, nausea etc.) or other factors compromising mental and physical capabilities. Intentionally caused damage, injury or violation of legal regu-
lations;
Any request for compensation caused by an accident result-
ing from use of the product;
Malfunction of the product caused by retrotting or replace-
ment with components which did not come from Yuneec;
Damage and/or injury caused by the use of replica parts
(non-original parts);
Damage and/or injury as well as violation of legal regulations caused by incorrect operation or misjudgment;
Damage and/or injury caused by damaged spare parts or not using original Yuneec spare parts;
Damage and/or injury caused by unauthorized change settings and/or parameters;
Damage and/or injury caused by modify and/or add parts;
Damage and/or injury as well as violation of legal regulations caused by ignoring the low voltage battery warning;
Damage and/or injury caused by knowingly and negligibly ying with a damaged model or one which is unt to y, e.g. due to dirt, water penetration, coarse particles, oil or a model which has not been correctly or completely assembled or if the main components exhibit visible damage, defects or missing parts;
Damage and/or injury as well as violation of legal regulations caused by use of the product in a no-y zone, e.g. next to an aireld, above a motorway or a natural conservation area;
Damage and/or injury as well as violation of legal regulations caused by operating the model in a magnetic eld (e.g. high voltage lines, electricity/ transformer stations, radio towers, mobile phone masts etc.), a strong wireless signal environ-
ment, no-y zones, poor visibility and in the event of vision impairments or other impacts on the pilot which are left unchecked etc;
Damage and/or injury brought about through a violation of the legal regulations for operating the model, in unsuitable weather conditions, e.g. rain, wind, snow, hail, storms, hurri-
canes etc;
Damage and/or injury as well as violation of legal regulations caused by force majeure, e.g. collision, re, explosion, ood-
ing, tsunami, landslide, avalanche, earthquake or other forces of nature;
Damage and/or injury as well as violation of legal regulations caused by the illegal or immoral use of the model, e.g. captur-
ing videos or recording data which infringes upon/harms the privacy of other people;
Damage and/or injury as well as violation of legal regulations caused by incorrect use of the batteries, protection systems, chargers or aircraft;
Consequential damage caused by the incorrect operation of any kind of system components and accessory parts, especially memory cards, whereby image or video material from the camera can become defect;
Any non-compliance with legal obligations, personal injury, material damage and environmental damage caused by use and a failure to comply with the local laws and regulations;
Damage and/or injury as well as violation of legal regulations caused by hazardous use without sufcient practical experi-
ence;
Damage and/or injury as well as violation of legal regulations caused by ying in legally dened no-y zones; and/or. Further losses which do not fall within the scope of use dened by Yuneec as improper. This product is designed for both professional use and personal private use. Any domestic and/or international laws, code and regulations in force as the time of taking off must be adhered to. Collection and Processing of Data Yuneec may collect navigation information such as GPS data to help improve our products. We may also collect Depth Map information and Infrared Image information from your drone delivered to our service center for repair and maintenance service or any other service. We may also collect other information such as device infor-
mation, server log information, etc. We may also collect personal information used in registration if you choose to become a registered user and any other information user provided to Yuneec. We may also collect information which user send to other users, and the recipients and senders of such information. We reserve the right to disclose your information if required to do so by law or in the good-faith belief that such disclosure is needed to comply with applicable laws, for example in response to a court order, judicial subpoena, warrant or request from government, or otherwise cooperating with government agencies or law enforcement. We also reserve the right to disclose your information that we believe in good faith is necessary or appropriate to: (i) protect ourselves or others from fraudulent, unlawful, or abusive activities; (ii) take precautions against potential liability; (iii) protect the security of the Yuneec Apps embedded into or downloaded onto your drone or any associated equipment and services; (iv) protect the legal rights of ourselves or any others. Any information we collected maybe disclosed or transferred to an acquirer, successor or assignee as part of any potential merger, acquisition, debt nancing or other activities that involves transfer of business assets. We may make the aggregated non-personal information of the users available to third parties for various purposes, including (i) complying with various report obligations; (ii) marketing efforts; (iii) analyzing product safety; (iv) under-
standing and analyzing our users interests, habits, usage pattern for certain functionalities, services, content, etc. Battery Warnings and Usage Guidelines WARNING: Lithium Polymer (LiPo) batteries are signicantly more volatile than alkaline, NiCd or NiMH batteries. All instructions and warnings must be followed exactly to prevent property damage and/or serious injury as the mis-
handling of LiPo batteries can result in re. By handling, charging or using the included LiPo battery you assume all risks associated with LiPo batteries. If you do not agree with these conditions please return the complete product in new, unused condition to the place of purchase immediately. You must always charge the LiPo battery in a safe, well-venti-
lated area away from ammable materials. Never charge the LiPo battery unattended at any time. When charging the battery you must always remain in constant observation to monitor the charging process and react imme-
diately to any potential problems that may occur. After ying/discharging the LiPo battery you must allow it to cool to ambient/room temperature before recharging. To charge the LiPo battery you must use only the included charger or a suitably compatible LiPo battery charger. Failure to do so may result in a re causing property damage and/or serious injury. If at any time the LiPo battery begins to balloon or swell, discontinue charging or discharging immediately. Quickly and safely disconnect the battery, then place it in a safe, open area away from ammable materials to observe it for at least 15 minutes. Continuing to charge or discharge a battery that has begun to balloon or swell can result in a re. A battery that has ballooned or swollen even a small amount must be removed from service completely. Do not over-discharge the LiPo battery. Discharging the battery too low can cause damage to the battery resulting in reduced power, ight duration or failure of the battery entirely. LiPo cells should not be discharged to below 3.0V each under load. Store the LiPo battery at room temperature and in a dry area for best results. When charging, transporting or temporarily storing the LiPo battery the temperature range should be from approximately 40120 F (549 C). Do not store the battery or aircraft in a hot garage, car or direct sunlight. If stored in a hot garage or car the battery can be damaged or even catch re. Never leave batteries, chargers and power supplies unattend-
ed during use. Never attempt to charge low voltage, ballooned/swollen, dam-
aged or wet batteries. Never allow children under 14 years of age to charge batter-
ies. Never charge a battery if any of the wire leads have been damaged or shorted. Never attempt to disassemble the battery, charger or power supply. Never drop batteries, chargers or power supplies. Always inspect the battery, charger and power supply before charging. Always ensure correct polarity before connecting batteries, chargers and power supplies. Always disconnect the battery after charging. Always terminate all processes if the battery, charger or power supply malfunctions. General Safety Precautions and Warnings WARNING: Failure to use this product in the intended manner as described in the quick start guide and instruction manual can result in damage to the product, property and/or cause serious injury. A Radio Controlled (RC) multirotor aircraft, APV platform, drone, etc. is not a toy! If misused it can cause seri-
ous bodily harm and damage to property. WARNING: As the user of this product you are solely and wholly responsible for operating it in a manner that does not endanger yourself and others or result in damage to the prod-
uct or the property of others. Keep your hands, face and other parts of your body away from the spinning propellers/rotor blades and other moving parts at all times. Keep items that could impact or become entangled away from the propellers/rotor blades including debris, parts, tools, loose clothing, etc. Always operate your aircraft in open areas that are free from people, vehicles and other obstructions. Never y near or above crowds, airports or buildings. To ensure proper operation and safe ight performance never attempt to operate your aircraft nearby buildings or other obstructions that do not offer a clear view of the sky and can restrict GPS reception. Do not attempt to operate your aircraft in areas with potential magnetic and/or radio interference including areas nearby broadcast towers, power transmission stations, high voltage power lines, etc. Always keep a safe distance in all directions around your aircraft to avoid collisions and/or injury. This aircraft is con-
trolled by a radio signal subject to interference from many sources outside your control. Interference can cause momen-
tary loss of control. To ensure proper and safe operation of the automatic landing function in Return Home Mode you must start the motors with the aircraft in an open space and achieve a proper GPS lock. Do not attempt to operate your aircraft with any worn and/or damaged components, parts, etc. including, but not limited to, damaged propellers/rotor blades, old batteries, etc. Never operate your aircraft in poor or severe weather condi-
tions including heavy winds, precipitation, lightning, etc. Always begin to operate your aircraft with a fully charged battery. Always land as soon as possible after the rst level low voltage battery warning or land immediately after the second level low voltage battery warning. Always operate your aircraft when the voltage of the battery in the transmitter/personal ground station is in a safe range
(as indicated by the LED status indicator light of the transmit-
ter/personal ground station). Always keep the aircraft in clear line of sight and under con-
trol, and keep the transmitter/personal ground station pow-
ered on while the aircraft is powered on. Always move the throttle control stick down fully and turn off the power in the event the propellers/rotor blades come into contact with any objects. Always allow components and parts to cool after use before touching them and ying again. Always remove batteries after use and store/transport them per the corresponding guidelines. Avoid water exposure to all electronic components, parts, etc. not specically designed and protected for use in water. Mois-
ture causes damage to electronic components and parts. Never place any portion of the aircraft or any related accesso-
ries, components or parts in your mouth as doing so could cause serious injury or even death. Always keep chemicals, small parts and electronic compo-
nents out of the reach of children. To ensure safe y, it is recommended to install the propeller protectors when operating the aircraft indoors or nearby crowds. Carefully follow the instructions and warnings included with this aircraft and any related accessories, components or parts
(including, but not limited to, chargers, rechargeable batteries, etc.). Camera Usage Warnings NOTICE For the latest product information, please check our ofcial website:www.yuneec.com. WARNING Do not expose the lens of the camera to extreme light sourc-
es. Do not operate the camera in the rain or in environments with high humidity. Do not try to repair the camera. Repairs must go to an autho-
rized service center. WARNING Read the entire instruction manual to become familiar with the features of the product before operating. Do not use with incompatible components or alter this prod-
uct in any way outside of the instructions provided by Yuneec. Failure to use this product in the intended manner as described in instruction manual can result in damage to the product, property and/or cause serious injury. may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Statement This equipment has been tested and found to comply with the limits for Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gen-
erates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, RF Exposure Warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or trans-
mitter. End-users and installers must be provided with anten-
na installation instructions and transmitter operating condi-
tions for satisfying RF exposure compliance. IC Radiation Exposure Statement for Canada CE Warning Statement This device meets the EU requirements on the limitation of the general public to electromagnetic elds by way of health protection. EU Operation Frequency (The Maximum Transmitted Power) Mantis Q Remote Controller:
5G: 5470-5725MHz (27dBm) Mantis Q:
5G: 5470-5725 MHz(27dBm) EU Compliance Statement Hereby, Yuneec International (China) Co., Ltd. declares that this device is in compliance with the essential requirements and other relevant provisions of the RED Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: http://yuneec/de-downloads Please visit the address above and enter into corresponding product page. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interfer-
ence that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'ex-
ploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. This equipment complies with IC RSS-102 radiation exposure limit set forth for an uncontrolled environment. Cet quipe-
ment respecte les limites d'exposition aux rayonnements IC dnies pour un environnement non contrl. NCC Warning Statement 1. 2. 4.7.9.1