SP-0909 Wireless Speaker Manual Size: H: 100mm x W: 322.5mm 18DEC20 Product Overview Charging your Wireless speaker Front Back 1. Use the Micro USB cable provided with this wireless speaker. 2. Connect the Micro USB plug to Micro USB charging port on the speaker, then connect the USB plug to a USB port on a computer or wall adapter to begin charging. 3. The light will turn red while charging and will turn off once fully charged.
-The input voltage to the product is DC 5V 1A.
-In order to charge the product in safe manner and reliable conditions, please only adopt certified appropriate charger/ adapter for charging the product. following two conditions:
(1) This device may not cause harmful interference. 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the Safety instructions for the lithium battery and charging the product FCC STATEMENT DC5V OFF ON NOTE:
You must select a qualified charger from a regular manufacturer. You must charge the Wireless speaker if it has been not used for more than 12 months. deg C/104 deg F.
-Switch off the product after use.
-Only charge the product at ambient temperatures between 10 deg C/ 50 deg F and 40 cause undesired operation.
(2) This device must accept any interference received, including interference that may
- Do not heat above 70 deg C/158 deg F, eg. Do not expose to sunlight or throw into fire. compliance could void the user's authority to operate the equipment. 2. Changes or modifications not expressly approved by the party responsible for
-Please note that we wont take any responsibility for any wrong operation (eg. Voltage NOTE: This equipment has been tested and found to comply with the limits for a Class higher than 5V) as this may result in severe injury or loss of property, and we cannot B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to control the operating process during the time the user using this product.
-In extreme cases, abuse or misuse of Lithium battery pack can lead to explosion, heat Micro USB Charging port On/Off switch Technical Specification generation, fire development or smoke development. Instruction Manual Thank you for purchasing the Chrome Wireless Speaker. This manual provides more information about this wireless speaker, please read the instructions before using. Package Contents Chrome Wireless Speaker x 1pc Micro USB Charging Cable x 1pc Instruction Manual x 1pc Power on Slide the ON/OFF switch to the ON position. Power off Slide the ON/OFF switch to the OFF position. Driver Diameter: 50 mm Impedance: 4 Ohms Playing Time: 2 Hours Charging Time: 1.5 - 2 Hours Rechargeable Li-Ion Battery 3.7V 300 mAh Bluetooth Range: 32.8 feet Bluetooth Version: 5.0 Micro USB Cable Included Pair Wireless speaker with your mobile device FAQ 1. Keep the distance between your wireless speaker and mobile phone
(or other devices) within 32.8 Feet. 2. Power on the wireless speaker. 3. Activate the Bluetooth function on your phone within range and select BT CHROME LED from the list shown. 4. You will hear a beep sound when pairing is successful. If the Wireless speaker cannot be paired with your device, please try the following:
Ensure that your speaker is in pairing mode or reconnection mode. Ensure that Bluetooth search function of your mobile device is activated. Reconnect Wireless speaker to your mobile device When powered on, the wireless speaker will automatically connect with the last successfully paired device. If the Wireless speaker cannot be recharged:
If you use a power outlet, ensure that the power supply is connected securely and the outlet works. If you use a computer, ensure that it is connected and the USB port is powered. provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. FCC ID: 2ADM5-SP-0909 Keep All Relevant Information for Future Reference Distributed by 1616 Holdings, Inc. 701 Market Street, Suite 200 Philadelphia, PA 19106 Made in China