FCC ID: 2ADM5-SP-0761 BT HOME DECOR SPKR AST

Date: 24 Sep 2020 Product: SP-0761 IM SKU:

SP-0761 HABIT WIRELESS SPEAKER IM Size: 322.5(w) x 100(h) mm H A B I T W I R E L E S S S P E A K E R Instruction Manual Thank you for purchasing the Habit Wireless Speaker. This manual provides more information about this wireless speaker, please read the instructions before using. Product Overview Charging your Wireless speaker Front Back For your safety, please always use appropriate 5V input charger/Adapter to charge the product. DO NOT USE Quick Charging USB Adapter to charge the product, as it might damage the product. Volume Down Prev./

Button Next/

Volume Up Button LED Indicator Power/Play/Pause Button Micro USB Charging Port NOTE:

You must select a qualified charger from a regular manufacturer. You must charge the Wireless speaker if it has been not used for more than 12 months. 1. Use the Micro USB cable provided with this wireless speaker. 2. Connect the Micro USB plug to Micro USB charging port on the speaker, then connect the USB plug to a USB port on a computer or wall adapter to begin charging. 3. The LED Indicator will turn red while charging and will turn off once fully charged. deg C/104 deg F. Safety instructions for the lithium battery and charging the product FCC STATEMENT

-The input voltage to the product is DC 5V 1A.

-In order to charge the product in safe manner and reliable conditions, please only adopt certified appropriate charger/ adapter for charging the product. following two conditions:

(1) This device may not cause harmful interference.

-Only charge the product at ambient temperatures between 10 deg C/ 50 deg F and 40 cause undesired operation.

(2) This device must accept any interference received, including interference that may 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the

- Do not heat above 70 deg C/158 deg F, eg. Do not expose to sunlight or throw into fire. compliance could void the user's authority to operate the equipment. 2. Changes or modifications not expressly approved by the party responsible for

-Switch off the product after use.

-Please note that we wont take any responsibility for any wrong operation (eg. Voltage NOTE: This equipment has been tested and found to comply with the limits for a Class higher than 5V) as this may result in severe injury or loss of property, and we cannot B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to control the operating process during the time the user using this product.

-In extreme cases, abuse or misuse of Lithium battery pack can lead to explosion, heat generation, fire development or smoke development. Package Contents Habit Wireless Speaker x 1pc Micro USB Charging Cable x 1pc Instruction Manual x 1pc Power on Press the Power/Play/Pause Button and hold on 2 second. Power off Press the Power/Play/Pause Button and hold on 2 second. Note: Always power off the speaker when not in use. Pair Wireless speaker with your mobile device 1. Keep the distance between your wireless speaker and mobile phone

(or other devices) within 32.8 Feet. 2. Power on the wireless speaker. 3. Activate the Bluetooth function on your phone within range and select BT HABIT SPK from the list shown. 4. You will hear a beep sound when pairing is successful. Technical specification Driver Diameter: 52mm x 2 Impedance: 4 Ohms Power Supply:

Li-ion Battery 3.7V 1200 mAh Playtime: 7-8 Hours Charging Time: 2.5-3 Hours Bluetooth Range: 32.8 Feet Micro USB Cable Included FAQ If the Wireless speaker cannot be paired with your device, please try the following:

Ensure that your speaker is in pairing mode or reconnection mode. Ensure that Bluetooth search function of your mobile device is activated. Reconnect Wireless speaker to your mobile device When powered on, the wireless speaker will automatically connect with the last successfully paired device. If the Wireless speaker cannot be recharged:

If you use a power outlet, ensure that the power supply is connected securely and the outlet works. If you use a computer, ensure that it is connected and the USB port is powered. provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. RF warning statement:

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. ITEM# SP-0761 FCC ID: 2ADM5-SP-0761 Keep all relevant information for future reference Distributed by 1616 Holdings, Inc. 701 Market Street, Suite 200 Philadelphia, PA 19106 Made in China Approval:

Date:

Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ201013833-RF EXHIBIT A - FCC ID LABEL AND LOCATION FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

Zeeva International Limited Suite 1007B, 10th Floor, Exchange Tower, 33 Wang Chiu Road,Kowloon Bay, Hong Kong Tel: +852-2868 0511 | Fax: +852-2524 1986 E-mail: akshay.butani@zeeva.com Date: 10/29/2020 To: FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 We, Zeeva International Limited hereby declare that Product Name: BT HOME DCOR SPKR AST Model No: SP-0761 FCC ID: 2ADM5-SP-0761 For BT Mode: EDR(8DPSK) ,BLE are disable by software For Below are activated:

Bluetooth BDR(GFSK) , EDR(/4DQPSK), Except for the manufacturer, the end user does not have any capability to modify/change the RF parameters. We acknowledge that it is the manufacturers responsibility to provide the radio configurations to ensure compliance with Commissions rules. Sincerely Yours, Signature:

Printed Name: Akshay P Butani Tiltle: Vice President

Zeeva International Limited Suite 1007B, 10th Floor, Exchange Tower, 33 Wang Chiu Road, Kowloon Bay, Hong Kong Tel: +852-2868 0511 | Fax: +852-2524 1986 E-mail: akshay.butani@zeeva.com 10/29/2020 FCC Authorization FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

We, Zeeva International Limited the undersigned, hereby authorize Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratory Corporation on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature:

Printed Name: Akshay P Butani Title: Vice President QA-FR-170-B

AC6925 24MHz

) ; Crystal

) provides the clock signal for the Bluetooth chip. Bluetooth signals Circuit Description 1. Battery(3.7V)provides energy for the Bluetooth chip(

oscillator(

get through a matching circuit, and then transmitted to the space through the antenna 2402MHz2480MHz . When the product is connected, the product can be in twoway communication with other Bluetooth devices, and then the device's Bluetooth module sends Bluetooth signals into space, the product receives the Bluetooth signal through an antenna, transmission to the Bluetooth chip via matching circuit.