Table of Contents 1. Introduction 2. Packaging Contents 4. How to use L E D L I G H T - U P C A T E A R S L E D L I G H T - U P C A T E A R S INSTRUCTION MANUAL 1 Introduction 1 2 Packaging Contents 2 3 Connection Diagram 2 4 How To Use 4.1 General Function 4.2 Pairing To Mobile Phone 4.3 Charging Your Headphones 5 Product Specification 6 FAQ 7 FCC Statement Battery Statement 3 3 4 5 6 6 7 8 Congratulations, and thank you for choosing the Meow Wireless Headphones. This manual will help you operate the Meow Wireless Headphones, but firstly you should familiarize yourself with the Bluetooth functionality of your mobile phone or other devices before using the Meow Wireless Headphones. Please follow the rules depicted in this manual closely to ensure your safety. Before using this Bluetooth headphones, we would strongly encourage you to read through this user manual. Be more wary of any edges, uneven surfaces, metal parts, accessories and its packaging so as to prevent any possible injury or damage. Do not modify, repair or dismantle this Bluetooth headphones. Doing so may result in fires, electric shocks, complete breakdown of this Bluetooth headphones, etc. All are not covered under warranty. Do not use an diluent or volatile liquid to clean the Bluetooth headphones. Do not use the Bluetooth headphones in a hazardous location. 1 X Meow Wireless Headphones 1 X Instruction Manual Pairing Includes:
1(One) Headphones 6.46in. x 8.15in. x 3.15in. (16.4cm x 20.7cm x 8cm) /
1(One) Charging Cable 9.8in. (25cm) / 1(One) Instruction Manual 3. Connection Diagram 1 X Micro USB Charging Cable Turn on &
Enter the pairing mode Press and hold the On / Off Button for 3 seconds. After turning on, the LED indicator flashes red/blue. Use a mobile phone with Bluetooth function or other Bluetooth devices to perform necessary pairing action. After pairing, the LED indicator slowly blinks with blue. Turn off Press and hold the On / Off Button for 3 seconds. Charging Answering a Call Play / Pause Music Cat Ear LED Light On / Off Plug the Micro USB to the Micro USB port. When charging, the LED indicator turns red. After full charging, the LED indicator turns off. Press On / Off button to answer phone call, press On / Off button again to end call. Press and hold 2 seconds to reject call. Double click to redial last call. Press On / Off button to play music and press it again to pause music. Press the Cat LED On/Off button to turn the LED light on and off. Note: The LED light is only on when Bluetooth power is turned on LED Indicator 1 Micro USB Charging port Microphone On / Off Button Cat Ear LED Light On / Off Button 4.2. Pairing to Mobile phone or other device To use your Bluetooth headphones, you must first pair your headphones with a mobile phone or other Bluetooth device. Once your Bluetooth headphones is paired to a specific mobile phone, they will remain paired and automatically recognize each other whenever they are within range. Turn on your phone and ensure the Bluetooth function is activated. Turn on the headphones, enter the pairing mode. Search your Bluetooth devices on your phone by following the phones instructions. Refer to your phones user manual for more information. After a few seconds the phone will list the BT MEOW HP as a discover device. Select it and follow your phones instructions to select this pairing. Your phone will confirm the pairing, and then press Yes/OK. 4.3. Charging your headphones For your safety, please always use an appropriate 5V input charger/Adapter to charge the product. DO NOT USE Quick Charging USB Adapter to charge the product, as it might damage the product. Use the Micro USB charging cable accessory provided with this headphones. Connect the Micro USB plug to the Micro USB charging port on the headphones positioned at in headphones diagram on page 2. Connect the USB plug to a USB port on a computer or wall adapter to activate charging. 1
**Make sure to keep the headphones charging for a minimum of 2 hours before initial use. Warning:
You must select a qualified charger from a regular manufacturer. You must charge the Bluetooth headphones if it has not been used for more than 6 months. 5. Product Specification Driver Diameter: 40 mm Impedance: 32 Ohms Frequency Response: 20 Hz - 20K Hz Sensitivity: 95 dB +/- 3 dB Battery Capacity: Li-ion Battery 3.7 V 200 mAh Playtime: 3-4 Hours Charging Time: 1-2 Hours Bluetooth Range: 32.8 Feet Charging Method: Micro USB Charging 7. FCC Statement FCC STATEMENT Safety instructions for the lithium battery and charging the product
-The input voltage to the product is 5V 1A. 1. This device complies with Part 15 of the FCC Rules. Operation is subject to
-In order to charge the product in safe manner and reliable conditions, please the following two conditions:
only adopt certified appropriate charger/ adapter for charging the product.
(1) This device may not cause harmful interference.
-Only charge the product at ambient temperatures between 10 deg C/ 50
(2) This device must accept any interference received, including interference deg F that may cause undesired operation. and 40 deg C/104 deg F. 2. Changes or modifications not expressly approved by the party responsible for
- Do not heat above 70 deg C/158 deg F, e.g. Do not expose to sunlight or compliance could void the user's authority to operate the equipment. throw into fire.
-Switch off the product after use. NOTE: This equipment has been tested and found to comply with the limits for
-Please note that we wont take any responsibility for any wrong operation a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
(e.g. Voltage higher than 5V) as this may result in severe injury or loss of designed to provide reasonable protection against harmful interference in a property, and we cannot control the operating process during the time the residential installation. This equipment generates uses and can radiate radio user using this product. frequency energy and, if not installed and used in accordance with the
-In extreme cases, abuse or misuse of Lithium battery pack can lead to instructions, may cause harmful interference to radio communications. explosion, heat generation, fire development or smoke development. 6. FAQ is turned on ?
1. Why is there no power even when the headphones Ans: Ensure the battery has been charged up to 1 hour for initial use. 2. There is no sound when playback. Ans: Check the connection between headphones with phone or computer, if the connection is not established, please connect again. Make sure the headphones is paired and connected with your target phone or other master device. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Item # HP-0674 Made in China Keep All Relevant Information For Future Reference USB Plug Micro USB Plug
- Consult the dealer or an experienced radio/TV technician for help. FCC ID: 2ADM5-HP-0674 Approval:
Date: