FCC ID: 2ADM5-SP-0700 BT METAL LED CIRCLE SPKR

AURA WIRELESS SPEAKER Instruction Manual Thank you for purchasing the AURA Wireless Speaker. This manual provides more information about this wireless speaker, please read the instructions before using. Product Overview Charging your Wireless speaker Front Back 1. Use the Micro USB cable provided with this wireless speaker. 2. Connect the Micro USB plug to Micro USB charging port on the speaker, then connect the USB plug to a USB port on a computer or wall adapter to begin charging. 3. The light will turn red while charging and will turn off once fully charged. NOTE:

You must select a qualified charger from a regular manufacturer. You must charge the Wireless speaker if it has been not used for more than 12 months. On/Off switch Micro USB Charging port Package Contents AURA Wireless Speaker x 1pc Micro USB Charging Cable x 1pc Instruction Manual x 1pc Power on Slide the ON/OFF switch to the ON position. Power off Slide the ON/OFF switch to the OFF position. Technical specification Driver Diameter: 52 mm Impedance: 4 Ohms Charging Time: 1.5 - 2 Hours Playing Time: 1.5 - 2 Hours Rechargeable Li-Ion Battery 3.7V 300mAh Bluetooth Range: 32.8 feet Pair Wireless speaker with your mobile device FAQ 1. Keep the distance between your wireless speaker and mobile phone

(or other devices) within 32.8 Feet. 2. Power on the wireless speaker. 3. Activate the Bluetooth function on your phone within range and select BT Aura Speaker from the list shown. 4. You will hear a beep sound when pairing is successful. If the Wireless speaker cannot be paired with your device, please try the following:

Ensure that your speaker is in pairing mode or reconnection mode. Ensure that Bluetooth search function of your mobile device is activated. Reconnect Wireless speaker to your mobile device When powered on, the wireless speaker will automatically connect with the last successfully paired device. If the Wireless speaker cannot be recharged:

If you use a power outlet, ensure that the power supply is connected securely and the outlet works. If you use a computer, ensure that it is connected and the USB port is powered. Safety instructions for the lithium battery and charging the product

-The input voltage to the product is DC 5V 1A.

-In order to charge the product in safe manner and reliable conditions, please only adopt certified appropriate charger/ adapter for charging the product.

-Only charge the product at ambient temperatures between 10 deg C/ 50 deg F and 40 deg C/104 deg F.

- Do not heat above 70 deg C/158 deg F, eg. Do not expose to sunlight or throw into fire.

-Switch off the product after use.

-Please note that we wont take any responsibility for any wrong operation (eg. Voltage higher than 5V) as this may result in severe injury or loss of property, and we cannot control the operating process during the time the user using this product.

-In extreme cases, abuse or misuse of Lithium battery pack can lead to explosion, heat generation, fire development or smoke development. 27AUG19 FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. RF warning statement:

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. FCC ID: 2ADM5-SP-0700 Keep All Relevant Information for Future Reference Distributed by 1616 Holdings, Inc. 701 Market Street, Suite 200 Philadelphia, PA 19106 Made in China

EXHIBIT C - EUT INTERNAL PHOTOGRAPHS EUT Cover off View EUT Main Board Top View Antenna EUT Main Board Bottom View EUT Battery Top View EUT Battery Bottom View EUT IC Chip View

EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS EUT Front View EUT Rear View EUT Top View EUT Bottom View EUT Left View EUT Right View

EXHIBIT A - FCC ID LABEL AND LOCATION FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

Zeeva International Limited Suite 1007B, 10th Floor, Exchange Tower, 33 Wang Chiu Road,Kowloon Bay, Hong Kong Tel: +852-2868 0511 | Fax: +852-2524 1986 E-mail: akshay.butani@zeeva.com Date: 24/08/2019 To: FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 We, Zeeva International Limited hereby declare that Product Name: BT METAL LED CIRCLE SPKR Model No: SP-0700 FCC ID: 2ADM5-SP-0700 For BT Mode: BLE 1M/2M are disable by software For Below are activated:

Bluetooth BDR(GFSK) , EDR(/4DQPSK), EDR(8DPSK) Except for the manufacturer, the end user does not have any capability to modify/change the RF parameters. We acknowledge that it is the manufacturers responsibility to provide the radio configurations to ensure compliance with Commissions rules. Sincerely Yours, Signature:

Printed Name: Akshay P Butani Tiltle: Vice President

26MHz AB-5337

) ; Crystal

) provides the clock signal for the Bluetooth chip. Bluetooth signals Circuit Description 1. Battery(3.7V)provides energy for the Bluetooth chip(

oscillator(

get through a matching circuit, and then transmitted to the space through the antenna 2402MHz2480MHz . When the product is connected, the product can be in twoway communication with other Bluetooth devices, and then the device's Bluetooth module sends Bluetooth signals into space, the product receives the Bluetooth signal through an antenna, transmission to the Bluetooth chip via matching circuit.

Zeeva Int Suite 100 Road, Ko Tel: +852 E-mail: a ternational Lim 07B, 10th Floo owloon Bay, H 2-2868 0511 |

akshay.butan mited or, Exchange T Hong Kong Fax: +852-25 ni@zeeva.c 524 1986 com Tower, 33 Wa ang Chiu FCC C Author rization 08/2019 04/0 FED DERAL CO OMMUNICA ATIONS C COMMISSIO ONS Aut thorization a and Evaluat tion Divisio on 743 5 Oakland M Mills Road Colu umbia, MD D 21046 Sub bject: Agent t Authorizat tion To w whom it ma ay concern:

, Zeeva Inte mpliance La lication for hese matters behalf shal ernational L aboratories Equipment s. All acts c l have the s Limited the u Corporation t authorizati carried out b same effect undersigned n to act on i ion, includin by Bay Area as our own d, hereby au its behalf in ng the signi a Complian action. uthorize Bay n all matters ing of all do nce Laborato y Area relating to ocuments re ory Corpora elating ation on We,

, the unders signed, here eby certify th hat we are n not subject t to a denial o of federal b enefits, that t includes FC CC benefits s, pursuant t to Section 5 5301 of the Anti-Drug Abuse Act of 1988, 21 U U.S.C. 862. This s authorizat tion is valid d until furthe er written n otice from t the applican nt. Sinc cerely Your rs, Sign nature:

Prin nted Name:

Akshay P B Butani e: Vice Pr FR-170-B resident We, Com app to th our Titl QA-F