FCC ID: 2ADM5-SP-0902 BT MINI CYLINDER SPKR

S BASS JAK DRUMBEAT WIRELESS SPEAKER Instruction Manual Thank you for purchasing the Drumbeat Wireless Speaker. This manual provides more information about this wireless speaker, please read the instructions before using. 2) Ss wate Stee ed Drumbeat Wireless Speaker x 1pe Micro USB Charging Cable x pe Instruction Manual x 1pe Power On/Off Power on, Slide the ON/OFF switch to the ON" position. Power off Slide the ON/OFF switch to the OFF position.

"Note: Always slide the Power switch to OFF positon when nat in use. Pair Wireless speaker with your mobile device 1. Keep the distance between your wireless speaker and mobile phone

(or other devices) within 32.8 Feet. 2. Power on the wireless speaker. 3. Activate the Bluetooth function on your phone within range and select BT DRUMBEAT SPK from the ist shown. 4. You wil hear a beep sound when pairing is successful. Reconnect Wireless speaker to your mobile device When powered on, the wireless speaker will automatically connect with the last successfully paired device. Charging your Wireless speaker 4, For your safety, please aways use appropriate SV input chargerAdapterto charge the product D0 NOT USE Quick Charging USB Adapter to charge the roduc, 2 might damage the product 1. Use the Mero USB cable provided wih this witless speaker. 2. Connect the Micro USB plug to Mico USB charging port onthe speaker, then Connect the USB plug to a USB port on a computer or wall adapter to begin charging. 3. The light wil tum red while charging and will tum off once fully charged. NOTE:

+ You must select a qualifed charger from a regular manufacturer.

+ You must charge the Wireless speaker iit has been not used for more than 12 months. ar se Plog Mero USE Flog Technical specification Driver Diameter: 45 mm Impedance: 4 Ohms Power Supply: Li-ion Battery 3.7V 300 man Play Time: 23 Hours

(Charging Time: 1.5-2 Hours Bluetooth Range: 32.8 Feet Bluetooth Version: 50 Micro USB Cable Included FAQ ithe Wireless speaker cannot be paired with your device, please try the following:

Ensure that your speaker is in pairing mode or reconnection mode. Ensure that Bluetooth search function of your mobile device is activated.

* Ifthe Wireless speaker cannot be recharged:

Ifyou use a power outlet, ensure thatthe power supply is connected securely and the outlet works. Ifyou use a computer, ensure that it is connected and the USB port is powered. Safety instructions forthe lithium battery and charging the product The input voltage to the product is DC SV 1A. In order to charge the producti safe manner and reliable conditions, please only adopt certfied appropriate charger adapter for charging the product.

-Only charge the product at ambient temperatures between 10 deg C/ 50 deg *F and 40 deg C/104 deg F.

= Donotheat above 70 deg C/158 deg F, eg. Do not expese to sunlight or throw into fre.

-Switch off the product after use. Please note that we won' take any responsibilty for any wrong operation (eg. Voltage higher than V) as this may resuit in severe injury or loss of property, and we cannot control the operating process during the ime the user using this product. in extreme cases, abuse or misuse of Lithium battery pack can lead to explosion, heat generation, fre development or smoke development. FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the folowing two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause undesired operation 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful Interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause hharmful interference to radio or television reception, which can be determined by fuming the equipment off and on, the user is encouraged to ty to correct the Interference by one or more ofthe following measures:

~Reorient or relocate the receiving antenna,

= Increase the separation between the equipment and receiver.

~ Connect the equipment into an outlet on a circuit different from that to whieh the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF waming statement:

The device has been evaluated to meet general RF exposure requirement. 10'92234"062971"5 FCC ID: 2ADMS5-SP-0902 Distributed by 16416 Holdings, Inc.

"704 Market Street, Suite 200 Philadelphia, PA 19106 Made in China Keep all relevant information for future reference

Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ200715831-RF EXHIBIT A - FCC ID LABEL AND LOCATION FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

Zeeva International Limited Suite 1007B, 10th Floor, Exchange Tower, 33 Wang Chiu Road,Kowloon Bay, Hong Kong Tel: +852-2868 0511 | Fax: +852-2524 1986 E-mail: akshay.butani@zeeva.com Date: 08/13/2020 To: FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 We, Zeeva International Limited hereby declare that Product Name: BT MINI CYLINDER SPKR Model No: SP-0902 FCC ID: 2ADM5-SP-0902 For BT Mode: BLE are disable by software For Below are activated:

Bluetooth BDR(GFSK) , EDR(/4DQPSK), EDR(8DPSK) Except for the manufacturer, the end user does not have any capability to modify/change the RF parameters. We acknowledge that it is the manufacturers responsibility to provide the radio configurations to ensure compliance with Commissions rules. Sincerely Yours, Signature:

Printed Name: Akshay P Butani Tiltle: Vice President

AB5337 26MHz

) ; Crystal

) provides the clock signal for the Bluetooth chip. Bluetooth signals Circuit Description 1. Battery(3.7V)provides energy for the Bluetooth chip(

oscillator(

get through a matching circuit, and then transmitted to the space through the antenna (2402MHz2480MHz).Whentheproductisconnected,theproductcanbe in twoway communication with other Bluetooth devices, and then the device's Bluetooth module sends Bluetooth signals into space, the product receives the Bluetooth signal through an antenna, transmission to the Bluetooth chip via matching circuit.

Zeeva International Limited Suite 1007B, 10th Floor, Exchange Tower, 33 Wang Chiu Road, Kowloon Bay, Hong Kong Tel: +852-2868 0511 | Fax: +852-2524 1986 E-mail: akshay.butani@zeeva.com 07/14/2020 FCC Authorization FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

We, Zeeva International Limited the undersigned, hereby authorize Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratory Corporation on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature:

Printed Name: Akshay P Butani Title: Vice President QA-FR-170-B