FCC ID: 2ADM5-SP-0914 BT MINI HOME SPEAKER LED

LED WIRELESS SPEAKER Instruction Manual Thank you for purchasing the Circult LED Wireless Speaker. This manual provides more information about this wireless speaker, please read the instructions before using. ia Et Front Back

(Circuit LED Wireless Speaker 1 Micro USS Charging Cable x 1 Instruction Manus x1 Power on Press the Powar/Play/Pause Bution and hold on 2 second Power off Press the Power/Play/Pause Bution and hold on 2 second Note: Atvays power ofthe speaker when notin use. 1. Keop the distance between your wireless speaker and mobile phone

(or other devices) within 92.8 Feat. 2. Power on the wireless epeaker. 3. Activate the Blustoth function an your phone within range and select BT CIRCUIT SPK" from thelist shown. 4. You wil near a beep sound when paring is successful A. For your safely, please always use appropriate 5V input charge/Adapter to charge the product. DO NOT USE Guick Gharging USS Adapter to charge the product, as it might damage the product 1. Use the Micro USB cable provided wit this wireless speaker. 2. Connect the Micro USB plug to Mico USB charging port onthe speaker, then Connect the USB plug to a USB port on a computer or wall adapter to begin charging

{3 The LED Indicator wil turn red while charging and wil tur of once fully charged. Nore:

+ You must select a qualtiad charger from a regular manufacture.

+ You must charge the Wireless speaker i thas been not used for more than 12 months

~~, s5 Aly Mice Use Pip Driver Diameter: 62 mm Bluctooth Range: 22.8 Feet Impedance: 4 Ohms [Bluetooth Version: 6.1 ower Supply: Charging Method: USB Charging don Battery 2.7V 200 mAh Micra USE Cable Included Playlime: 22.5 Hours

(Charging Time: 15-2 Hours Light Mode: With Light tip To Have Gradient Lighting

+ Ifthe Wireless epeaker cannot be paired with your device, please try the followi Ensure thal your speaker i in pairing mode or reconnection mode. Ensure that Bluetooth search function of your mobile device is activated.

+ Ifthe Wireless speaker cannot be recharged:

lf you use a power outlet, ensure thatthe power supply is connected securely and the outlet works. I you use a computer, ensure that itis connected and the USB port is powered, Safty instructions forthe lium battery and charging the product, The input votage tothe productis DC SV 1A, Inder to charge he produtin safe manner and relale codons, plaase only adopt oto appropiate charger adapter for charging the product.

-Only charge te product at ambient iemperatures between 10 deg C50 dog and 40 og CI104 dog. Do not heat above 70 dg C/158 do 69. Do not expos to sunlight or throw note.

-Sutch off the product ater use.

-Please not that we wont take any responsibilty for any wrong operation (9. Votage higher than 5V) as this may esut in sever inky of loss of property, and we cannot contr the operating process curing the ime the user using this product.

-In extreme cases, abuse or misuse of Lum battery peck can lado explosion, heat generation, re development or smoke development. FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) Tis device must accept any interference received, including interference that may cause undesired operation, 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with helms for a Cass B digital device, pursuant to Part 15 ofthe FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation, This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful Interference to radio communications. However, there is no guarantee that Interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turing the equipment off and on, the user is encouraged to try to correct the Interference by one or more ofthe folowing measures:

Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

= Connect the equipment into an outlet on a crcut diferent from that fo which the receiver is connected. Consult the dealer or an experienced raco(TV technician for help. RF waming statement:

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. ITEM# SP-0914 Fe 1 "922343 "350279 FCC ID: 2ADMS-SP-0914 | Distributed by 1646 Holdings, inc. 701 Market Street, Suite 200 Philadelphia, PA 19106 Made in China Keep All Relevantinformation For Future Reference

Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ201203832-RF EXHIBIT A - FCC ID LABEL AND LOCATION FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

Zeeva Int Suite 1007 Road,Kow Tel: +852 E-mail: a ternational Lim 7B, 10th Floor wloon Bay, Ho 2-2868 0511 |

akshay.butan mited

, Exchange To ng Kong Fax: +852-25 ni@zeeva.c 524 1986 com ower, 33 Wang g Chiu Dat To:

Aut 743 We Pro Mo FCC For For Blu Exc mo ma com Sinc Sign Prin Tilt te:2021/0 01/18 FEDERAL thorizatio 35Oaklan COMMU nandEva dMillsRo NICATION luationDi oadColum NSCOMMI ivision mbia,MD2 21046 ISSION e,ZeevaIn oductNam odelNo: SP CID:2ADM rBTMode nternation me:BTMIN P0914 M5SP091 e:BLE1M/

nalLimited NIHOMES dherebyd SPEAKERL declareth LED hat 14

/2Mared isableby software rBelowar etoothBD reactivate DR(GFSK), ed:

,EDR(/4 DQPSK), EDR(8DP SK) ceptforth odify/chan nufacture mpliancew hemanufa ngetheRF ersrespon withComm acturer,th paramete nsibilityto missions heenduse ers.Weac oprovidet rules. erdoesno cknowledg theradio othavean gethatit configura ycapabilit isthe tionstoe tyto nsure cerelyYou nature:

ntedNam le:VicePr urs, e:Akshay resident yPButani

24MHz AC6969

) ; Crystal

) provides the clock signal for the Bluetooth chip. Bluetooth signals Circuit Description 1. Battery(3.7V)provides energy for the Bluetooth chip(

oscillator(

get through a matching circuit, and then transmitted to the space through the antenna 2402MHz2480MHz . When the product is connected, the product can be in twoway communication with other Bluetooth devices, and then the device's Bluetooth module sends Bluetooth signals into space, the product receives the Bluetooth signal through an antenna, transmission to the Bluetooth chip via matching circuit.

Zeeva Int Suite 100 Road, Ko Tel: +852 E-mail: a ternational Lim 07B, 10th Floo owloon Bay, H 2-2868 0511 |

akshay.butan mited or, Exchange T Hong Kong Fax: +852-25 ni@zeeva.c 524 1986 com Tower, 33 Wa ang Chiu FCC C Author rization 22/2020 12/2 FED DERAL CO OMMUNICA ATIONS C COMMISSIO ONS Aut thorization a and Evaluat tion Divisio on 743 5 Oakland M Mills Road Colu umbia, MD D 21046 Sub bject: Agent t Authorizat tion To w whom it ma ay concern:

, Zeeva Inte mpliance La lication for hese matters behalf shal ernational L aboratories Equipment s. All acts c l have the s Limited the u Corporation t authorizati carried out b same effect undersigned n to act on i ion, includin by Bay Area as our own d, hereby au its behalf in ng the signi a Complian action. uthorize Bay n all matters ing of all do nce Laborato y Area relating to ocuments re ory Corpora elating ation on We,

, the unders signed, here eby certify th hat we are n not subject t to a denial o of federal b enefits, that t includes FC CC benefits s, pursuant t to Section 5 5301 of the Anti-Drug Abuse Act of 1988, 21 U U.S.C. 862. This s authorizat tion is valid d until furthe er written n otice from t the applican nt. Sinc cerely Your rs, Sign nature:

Prin nted Name:

Akshay P B Butani e: Vice Pr FR-170-B resident We, Com app to th our Titl QA-F