FCC ID: 2ADM5-HP-2001 BT SLEEP MASK SPEAKER

HP-2001 Sleep Eye Mask 23SEP21 Table of Contents 1. Introduction 2. Packaging Contents 4. How to use SLEEP COMFORTABLY AND RELAX WITH SOUND 4 How To Use INSTRUCTION MANUAL 1 Introduction 1 2 Packaging Contents 2 3 Connection Diagram 2 4.1 General Function 4.2 Pairing To Mobile Phone 4.3 Charging Your Product 5 Product Specification 6 FAQ 7 FCC Statement Battery Statement 3 3 4 5 6 6 7 8 Congratulations, and thank you for choosing the Sleep Eye Mask Speaker. This manual will help you operate the Sleep Eye Mask Speaker, but firstly you should familiarize yourself with the Bluetooth functionality of your mobile phone or other devices before using the Sleep Eye Mask Speaker. Please follow the rules depicted in this manual closely to ensure your safety. Before using this Bluetooth Speaker, we would strongly encourage you to read through this user manual. Be more wary of any edges, uneven surfaces, metal parts, accessories and its packaging so as to prevent any possible injury or damage. Do not modify, repair or dismantle this Bluetooth Speaker. Doing so may result in fires, electric shocks, complete breakdown of this Bluetooth Speaker, etc. All are not covered under warranty. Do not use an diluent or volatile liquid to clean the Bluetooth Speaker. Do not use the Bluetooth Speaker in a hazardous location. Micro USB Charging Cable x 1 Turn on &

Enter the pairing mode Press and hold the On / Off Button for 3 seconds. After turning on, the LED indicator flashes red/blue. Sleep Eye Mask Speaker x 1 Pairing Instruction Manual x 1 Use a mobile phone with Bluetooth function or other Bluetooth devices to perform necessary pairing action. After pairing, the LED indicator slowly blinks with blue. 3. Product Overview Turn off Press and hold the On / Off Button for 3 seconds. LED Indicator Volume Up / Next Song ON / OFF Button Play / Pause Music Answer / End Call Volume Down / Previous Song Charging Plug the Micro USB to the Micro USB port. When charging, the LED indicator turns red. After full charging, the LED indicator turns off. Play / Pause Music Press On / Off button to play music and press it again to pause music. Answer / End Call Press On / Off Button Reject Call Volume Up /

Next Song Press and hold On/Off Button for 2 seconds Volume Up: Short Press, Next Song: Press and hold for 2 seconds Volume Down /

Previous Song Volume Down: Short Press, Previous Song: Press and hold for 2 seconds Micro USB Charging port 1 4.2. Pairing to Mobile phone or other device To use your Bluetooth Speaker, you must first pair your Speaker with a mobile phone or other Bluetooth device. Once your Bluetooth Speaker is paired to a specific mobile phone, they will remain paired and automatically recognize each other whenever they are within range. Turn on your phone and ensure the Bluetooth function is activated. Turn on the Speaker, enter the pairing mode. Search your Bluetooth devices on your phone by following the phones instructions. Refer to your phones user manual for more information. After a few seconds the phone will list the BT Sleep Mask as a discover device. Select it and follow your phones instructions to select this pairing. Your phone will confirm the pairing, and then press Yes/OK. Reconnect Bluetooth speaker to your mobile device When powered on, the wireless speaker will automatically connect with the last successfully paired device. 4.3. Charging your Speaker For your safety, please always use an appropriate 5V input charger/Adapter to charge the product. DO NOT USE Quick Charging USB Adapter to charge the product, as it might damage the product. Use the Micro USB charging cable accessory provided with this Speaker. Connect the Micro USB plug to the Micro USB charging port on the Speaker positioned at in Product Overview on page 2. Connect the USB plug to a USB port on a computer or wall adapter to activate charging. 1

**Make sure to keep the Speaker charging for a minimum of 2 hours before initial use. USB Plug Micro USB Plug Warning:

You must select a qualified charger from a regular manufacturer. You must charge the Bluetooth Speaker if it has not been used for more than 6 months. 5. Product Specification Driver Diameter : 40 mm Playing Time : 1.5 - 2 Hours Charging Time : 1.5 - 2 Hours Power Supply : Li-Ion Battery 3.7V 200 mAh Bluetooth Range : 32.8 feet Micro USB Charging Cable Included 7. FCC Statement FCC STATEMENT Safety instructions for the lithium battery and charging the product

-The input voltage to the product is 5V 1A. 1. This device complies with Part 15 of the FCC Rules. Operation is subject to

-In order to charge the product in safe manner and reliable conditions, please the following two conditions:

only adopt certified appropriate charger/ adapter for charging the product.

(1) This device may not cause harmful interference.

-Only charge the product at ambient temperatures between 10 deg C/ 50

(2) This device must accept any interference received, including interference deg F that may cause undesired operation. and 40 deg C/104 deg F. 2. Changes or modifications not expressly approved by the party responsible for

- Do not heat above 70 deg C/158 deg F, e.g. Do not expose to sunlight or compliance could void the user's authority to operate the equipment. throw into fire.

-Switch off the product after use. NOTE: This equipment has been tested and found to comply with the limits for

-Please note that we wont take any responsibility for any wrong operation a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

(e.g. Voltage higher than 5V) as this may result in severe injury or loss of designed to provide reasonable protection against harmful interference in a property, and we cannot control the operating process during the time the residential installation. This equipment generates uses and can radiate radio user using this product. frequency energy and, if not installed and used in accordance with the

-In extreme cases, abuse or misuse of Lithium battery pack can lead to instructions, may cause harmful interference to radio communications. explosion, heat generation, fire development or smoke development. 6. FAQ is turned on ?

1. Why is there no power even when the Speaker Ans: Ensure the battery has been charged up to 2 hour for initial use. 2. There is no sound when playback. Ans: Check the connection between Speaker with phone or computer, if the connection is not established, please connect again. Make sure the Speaker is paired and connected with your target phone or other master device. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. RF warning statement:

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. FCC ID: 2ADM5-HP-2001 WARNING: This product can expose you to chemicals including Bisphenol A (BPA), which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. Keep all relevant information for future reference Item # HP-2001

Shenzhen Accurate Technology Co., Ltd. Project No.: SZ3210915-48146E-RF FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925) LABEL AND LOCATION Page 1 of 1

Zeeva International Limited Suite 1007B, 10th Floor, Exchange Tower, 33 Wang Chiu Road,Kowloon Bay, Hong Kong Tel: +852-2868 0511 | Fax: +852-2524 1986 E-mail: akshay.butani@zeeva.com Date: 09/15/2020 To: FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 We, Zeeva International Limited hereby declare that Product Name: BT SLEEP MASK SPEAKER Model No.: HP-2001 FCC ID: 2ADM5-HP-2001 For BT Mode: BLE 1M/2M are disable by software For Below are activated:

Bluetooth BDR(GFSK) , EDR(/4DQPSK), EDR(8DPSK) Except for the manufacturer, the end user does not have any capability to modify/change the RF parameters. We acknowledge that it is the manufacturers responsibility to provide the radio configurations to ensure compliance with Commissions rules. Sincerely Yours, Signature:

Printed Name: Akshay P Butani Tiltle: Vice President

Circuit Description The 26MHZ crystal oscillator drives the base of 1. module (U1)has the matching

. The output of The modulation provided by network and that limit the harmonic content and effect the proper coupling of the antenna AB5616 AB5616 X to the output stage. Antenna, Ground and Power Source The antenna consists of a 2.4GHz There is no external ground connection. The ground is only that of the printed circuit board. Electric current is supplied by a 3.7 Volt primary battery on board antenna Feature:Frequency Range: 2402MHz-2480MHz