Instruction Manual Thank you for purchasing the Drum Beats Wireless Speaker. This manual provides more information about this wireless speaker, please read the instructions before using. LED Micro USB Ono Indicator Charging Port Switch Package Contents Drum Beats Wireless Speaker x 1p Micro USB Charging Cable x tpe Instruction Manual x 1pe Power On/Off Power on Slide the ON/OFF switch to the ON" postion. Power off Slide the ONIOFF switch to the OFF positon Pair Wireless speaker with your mobile device 1. Keep the distance between your wireless speaker and mobile phone
(or other devices) within 32.8 Feet. 2. Power on the wireless speaker. 3. Activate the Bluetooth function on your phone within range and select LED BT TOWER SPK" from the list shown. 4. You will hear a beep sound when pairing is successful Reconnect Wireless speaker to your mobile device When powered on, the wireless speaker will automatically connect withthe last successtuly paired device. Charging your Wireless speaker
\ For your safety, please always use appropriate SV input charger!
Adapter to charge the product. DO NOT USE Quick Charging USB Adapter to charge the produc, as it might damage the product. 1. Use the Micro USB charging cable provided with this wireless speaker. 2. Connect the Micro USB plug to Micto USB charging port on the speaker, then connect the USB plug to a USB port on a computer or wall adapter to begin charging 3. The light will urn red while charging and will tur off once fully charged. NOTE:
+ You must select a qualified charger from a regular manufacturer.
+ You must charge the Wireless speaker fit has been not used for more than 6 months. ___:
use Flug Mero USB Pig Technical specification Driver Diameter: 2x4 Inches Output: 2xsW Impedance: 4 Ohms Power Supply: Liion Battery 37V 1200mAh Play Time: 4.5-5 Hours Charging Time: 2.5 - 3 Hours, Bluetooth Range: 32.8 feet Micro USB charging cable included. FAQ Ifthe Wireless speaker cannot be pai please try the following:
Ensure that your speaker is in paling mode or reconnection mode. Ensure that Bluetooth search function of your mobile device is activated, 1d with your device,
* If the Wireless speaker cannot be recharged:
you use a power outlet, ensure that the power supply is connected securely and the outlet works. Ifyou use a computer, ensure tha itis connected and the USB port is powered. 4 Safely instructions forthe lithium battery and charging the product The input voltage tothe productis DC BV 1A.
-tn order to charge the preductin safe manner and rable conditions, please only adopt Cattied appropriate charger adaptor for charging the product.
-Only charge the product at ambient temperatures between 10 deg C/60 deg "F and 40 dog C/104 dog
- Do not heat above 70 deg Ci158 deg F, 99. Donat expose to sunlight or throw into fre.
-Switch off the product ater use.
-Please note that we won't take any responsibilty for any wrong operation (eg. Votage higher than 5V) as this may result in sever injury oF loss of property, and we cannot contrl the operating process during the time the user using this product. stn extreme cases, abuse or misuse of Lithium battery pack can lead to explosion, heat generation, re development or smoke development. FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits fora Class B digital device, pursuant to Part 5 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuming the equipment off and on, the user is encouraged to ty to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna,
- Increase the separation between the equipment and receiver.
~ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
~Consuit the dealer or an experienced radia/TV technician for help. RF waming statement:
The device has been evaluated to meet general RF exposure requirement. C FCC ID: 2ADMS-SP-0041 Keep All Relevant Information for Future Item#SP-0041-BLACK Distributed by 1616 Holdings, Inc. 701 Market Street, Suite 200 Philadelphia, PA 19106 Made in China