FCC ID: 2ADM5-ZT-0170-49 NIC RC BATTLING ROBOT (Remote Controller 49 MHz)

10+

AGES Product Overview REMOTE CONTROL Package Contents Standard Control Standard Control How to Win Note: To avoid losing control, always pay attention when controlling the Remote Control Battle Robot. Size: 16.54(W) x 8.66(H)in 420(W) x 220(H)mm Remote Control Battle Robot x 2 Remote Controller x 2 Instruction Manual x 1 Specifications Power Supply:

Remote Control Battle Robot Power Supply:

3 x AA 1.5V Batteries (Not Included) Remote Controller Power Supply:

3 x AAA 1.5V Batteries (Not Included) Instruction Manual Thank you for purchasing the Remote Control Battle Robot. This manual provides more information about this Remote Control Battle Robot, please read the instructions before using. Remote Control Battle Robot x 2 Instruction Manual Remote Controller x 2 Instruction Manual Power On/Off Remote Green Robot - 49 MHz Control Remote Control Battle Robot to move forward Control RC Battle Robot to spin the body to the left Forward Button Left Button Hit the chest and pop off opponents head to win!

On / Off Switch Backward Button Right Button Power On/Off Slide the ON/OFF Switch to ON to turn on the RC Battle Robot. Slide the ON/OFF Switch to OFF to turn off the RC Battle Robot. Forward / Backward Button Spin Left / Spin Right Button Control Remote Control Battle Robot to move backward clockwise Control RC Battle Robot to spin the body to the right Go forward, spin your RC Battle Robot and hit the chest of your opponent's robot to pop off its head. Be victory and take them down!

Batteries Installation For Battle Robot Batteries Installation For Remote Controller Performance Tips Warning FCC Statement 1. Do not drive the RC Battle Robot on grass, sand or go through water. 2. Do not drive the RC Battle Robot in windy or rainy weather. 3. Do not drive the RC Battle Robot into any sharp object. 4. Keep fingers, hair and loose clothing away from RC Battle Robot. Care and Maintenance Always use dry and soft cloth to clean this product. Avoid this product from being exposed to sunlight or heat. This product is suitable to be used by people who has operating experience in remote toy or aged no less than 10 years old. Please do not put the product in your mouth to prevent choking hazard of small parts. Please do not put the finger into available interspaces. Please do not play the product in a brutal way such as throwing, crashing or twisting it. Avoid immersing these toys in water, otherwise, the electronic parts may be damaged. Please store the smaller-sized product accessories in places that are out of reach of children, in order to avoid the occurrence of accidents. Check the product regularly. If any damages are discovered, please stop using immediately, until it is completely repaired in good working condition. Avoid placing the batteries in places in high temperatures and avoid exposure to heat. IMPORTANT: BATTERY INFORMATION CAUTION:

TO AVOID BATTERY LEAKAGE 1. The batteries used with this product are small parts and should be kept away from small children who still put things in their mouths. If they are swallowed, promptly see a doctor and have the doctor phone American Association of Poison Control Centers (1-800-222-1222). 2. Always purchase the correct size and grade of battery most suitable for intended use. 3. Always follow the instructions carefully. Use only batteries specified and be sure to insert them correctly by matching the + and - polaritymarkings. 4. Do not mix old batteries and new batteries or standard (carbon-zinc) with alkaline batteries. 5. Remove exhausted or dead batteries from the product. 6. Remove batteries if product is not to be played with for a long time. 7. Do not short-circuit the supply terminals. Should this product cause, or be affected by local electrical interference, move it away from other electrical equipment. Reset (switching ON & OFF again or removing and re-inserting batteries) if necessary. When young children are operating the product, it shall be ensured that the adults are guiding and making sure the product control is within the viewing range of the controller (or instructor) so that it makes the control of the toy more convenient. When the product is not in use, please switch off the power supplies of the toy, and remove the batteries from the product. Please note that we wont take any responsibility for any wrong operation as this may result in severe injury or loss of property, and we cannot control the operating process during the time when the user assembles or uses this product. Once this product is sold, we wont be responsible for any safety responsibility during the time the user operates or uses controls this products. This device complies with the part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. The user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that Consult the dealer or experienced radio/ TV technician for help. to which the receiver is connected. RF warning statement:

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. FCC ID: 2ADM5-ZT-0170-49 ZT-0170 Distributed by:

OLD EAST MAIN CO. 100 MISSION RIDGE GOODLETTSVILLE, TN 37072 MADE IN CHINA Keep All Relevant Information for Future Reference To install batteries into the RC Battle Robot, unscrew the screw on the battery box cover to open the cover. Insert 3 x AA 1.5V batteries

(Not Included) into the battery box. Batteries should be placed as shown on the diagram. Replace the battery box cover and tighten the screw. To install batteries into the Remote Controller, unscrew the screw on the battery box cover to open the cover. Insert 3 x AAA 1.5V batteries

(Not Included) into the battery box. Batteries should be placed as shown on the diagram. Replace the battery box cover and tighten the screw. Notice:

When inserting the batteries, you must insert according to the correct polarity, the RC Battle Robot wont function if batteries are reversed. Notice:

When inserting the batteries, you must insert according to the correct polarity, the Remote Controller wont function if batteries are reversed.

EXHIBIT A - FCC ID LABEL AND LOCATION FCC ID Label FCC ID Label Location Information

The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

Technical Description MCU Coding IC and the peripheral oscillation modulation amplification circuit is composed. When the function button is pressed by the IC encoded into a set of binary serial code, by the modulation circuit to load the encoded signal into the carrier, amplified by amplification circuit and emitted by the antenna. Radio parameters Antenna gain 0dbi Oscillator 86

. MH 4 9. z

Zeeva International Limited Suite 1007B, 10th Floor, Exchange Tower, 33 Wang Chiu Road, Kowloon Bay, Hong Kong Tel: +852-2868 0511 | Fax: +852-2524 1986 E-mail: akshay.butani@zeeva.com 03/17/2020 FCC Authorization FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

We, Zeeva International Limited the undersigned, hereby authorize Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratory Corporation on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature:

Printed Name: Akshay P Butani Title: Vice President QA-FR-170-B