all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
user manual | Users Manual | 3.16 MiB | ||||
1 |
|
internal photos | Internal Photos | 1.06 MiB | ||||
1 |
|
external photos | External Photos | 357.49 KiB | ||||
1 |
|
Label and Location | ID Label/Location Info | 122.95 KiB | ||||
1 |
|
Agent Authorization Letter | Cover Letter(s) | 28.97 KiB | ||||
1 |
|
Long Term Confidentiality Request Letter | Cover Letter(s) | 28.57 KiB | ||||
1 | RF Exposure Info | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | user manual | Users Manual | 3.16 MiB |
User Guide This guide is only applicable to FLASHFORGE Adventurer3 Lite 3D printer Content Preface Notice Terms Chapter 1: About Adventurer 3 Lite 1.1 - Components Introduce 1.2 - Reference Chapter 2: Operating 2.1 - Unpacking 2.2 - Accessories 2.3 - Interface 2.3.1 - Build 2.3.2 - Tools 2.3.2.1 - NetWork 2.3.2.2 - Preheat 2.3.2.3 - Setting 2.3.2.4 - About 2.3.3 - Filament 2.4 - Print 2.4.1 - Load Filament 2.4.2 - Model File Transfer 2.4.3 - Print 2.4.3.1 - FlashCloud Print 2.4.3.2 - PolarCloud Print 2.4.4 - Model Remove 2.4.5 - Replace Filament 2.4.5.1 - The switching can be controlled through the cloud Chapter 3: Q&A Chapter 4: Supports and Service 06 07 08 10 11 11 13 13 16 19 20 21 22 22 24 29 29 31 35 36 37 06 08 38 41 01 Preface Note: Each device must be tested before leaving factory. If there are some residues in extruder or some tiny scratches on the build tape, it is normal and wont affect the printing quality. On the completion of this User Guide, thanks all FlashForge engineers and the FlashForge 3D printer users for their unremitting efforts and sincere assistance. The FlashForge Adventurer 3 Lite User Guide is designed for the Adventurer 3 Lite users to start their printing journey with FlashForge Adventurer 3 Lite. Even if you are familiar with earlier FlashForge machines or 3D printing technology, we still recommend that please read this guide, as there is lots of important information about the Adventurer 3 Lite for you to get a better 3D experience. For a better and more successful printing experience, you can refer to the following materials:
Quick Start Guide:
Users will find the Quick Start Guide together with the printer accessories. The Quick Start Guide will help you start your print journey as soon as possible. Official FlashForge Website: www.flashforge.com The official FlashForge website contains the up-to-date information concerning FlashForge software, firmware, device maintenance and so on. Users are also able to get the contact information from there. 02 Notice Safety Notice: PLEASE READ AND STRICTLY FOLLOW ALL THE SAFETY WARNINGS AND NOTICE BELOW. Work Environment Safety Keep your work place tidy. Do not operate Adventurer 3 Lite in the presence of flammable liquids, gases or dust. Keep Adventurer 3 Lite out of children and untrained peoples reach. Electrical Safety Always use the Adventurer 3 Lite with a properly grounded outlet. Do not refit Adventurer 3 Lite plug. Do not use Adventurer 3 Lite in damp or wet locations. Do not expose Adventurer 3 Lite to burning sun. In case of device damage, please use the power supply provided by FlashForge. Avoid using the device during an thunderstorm. In case of uncertain accident, please unplug the device if you do not use it for long. Personal Safety Do not touch the nozzle and build plate during printing. Do not touch the nozzle after finishing printing. Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Do not operate the device while you are tired or under the influence of drugs, alcohol or medication. Cautions Do not leave the device unattended for long. Do not make any modifications to the device. To lower the build plate before loading/unloading filament.
(The distance between the nozzle and build plate should be kept for at least 50mm) Operate the device in a well-ventilated environment. Never use the device for illegal activities. Never use the device to make any food storage vessels. Never use the device to make any electrical appliance. Never put the model into your mouth. Do not remove the models with force. 03 Environment Requirements Temperature: RT 15-30; Moisture: 20%-70%
Place Requirements The device must be placed in a dry and ventilated environment. The distances of the left, right and back side space should be at least 20cm, and the distance of the front side space should be at least 35cm. Device storage temperature: RT 0-40 Filament Requirements Do not abuse the filament. Please make sure you use the FlashForge filament or the filament from the brands accepted by FlashForge. Nozzle clogging and damage may be caused by non-FlashForge filament due to inappropriate material properties. Filament Storage All polymers degrade with time. Do not unpack filament until necessary. Filament should be stored at clean and dry conditions. Legal Notice All the information in this document is subject to any amendment or change without the official authorization from FlashForge. FLASHFORGE CORPORATION MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRATIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. FCC Notice This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FlashForge shall not be liable for errors contained herein for incidental consequential damages in connection with furnishing, performance or use of this material. This document contains proprietary information protected by copyright. Copyright 2017 FlashForge Corp. All Rights Reserved. 04 Terms Build Plate The surface on which the Adventurer 3 Lite builds an object. Build Tape The black tape that covers Adventurer 3 Lites build plate so that the object can stick to the build plate well. Build Volume The three dimensional amount of space that an object will use once it is completed. The largest build volume is 150*150*150mm. Extruder Nozzle The integral extruder device installed on X-Axis. Extruder draws the filament from the spool, melts it and pushes it through a nozzle into the build plate. Also called print head, which located at the bottom of the extruder where heated filament is squeezed out. Cooling Fan To cool the outer assembly of the extruder and gear motor. Filament Cartridge A specific box for placing FlashForge filament, which is located on the right of printer. Filament Guide Tube A white plastic tube that guides the filament from the filament box to the filament intake. Filament Intake An opening located at the top of the extruder. Solid Glue Stick A solid adhesive used for making the model stick to the build plate firmly. 05 Chapter 1: About Adventurer 3 Lite 1 3 4 2 5 10 6 7 8 9 23 22 21 20 19 18 11 12 13 14 15 17 16 24 25 26 1.1 Components Introduce 1. Filament guide tube 2. Filament guide tube joint 3. Extruder base 4.Cooling Fan 5. Removable nozzle 6. Extruder cables 7. Clip 8. Led light 9. Air guide 10. Front door 11.Y-Axis sliding slot 12.Platform base 13. Removable build plate 14.Touch-screen 15.USB stick input 16.Power switch 17. Power input 18. Spool holder 19.Filament cover 20. Filament cover handle 21. Motor 22. Filament intake 23.Filament feeding wheel 24. Top cover 25. Air outlet 26. Ethernet input 06 1.2 Reference Name Adventurer 3 Lite Number of Extruder 1, Removable Print Technology Fused Filament Fabrication (FFF) Screen Size 2.8" color IPS Touch Screen Build Volume 150150150mm Layer Resolution 0.1-0.4mm Build Accuracy 0.2mm Positioning Accuracy Z axis 0.0025mm; XY axis 0.011mm Filament Diameter 1.75mm (0.07mm) Nozzle Diameter 0.4mm Build Speed 10~100 mm/s Software FlashPrint Support Formats Input: 3mf/stl/obj/fpp/bmp/png/jpg/jpeg File Output: gx/g File Memory Size 8G OS Win xp/Vista/7/8/10, Mac OS, Linux AC Input 150W (24V, 6.25A) Connectivity USB stick, WiFi, Ethernet Device Size 388340405mm Net Weight 9 kg 07 Chapter 2: Operating 2.1 Unpacking The People's Insurance Company of China KEEP DRY HANDLE WITH CARE FRAGILE The People's Insurance Company of China KEEP DRY HANDLE WITH CARE FRAGILE FRAGILE HANDLE WITH CARE KEEP DRY 1. Open the box. 2. Take out the wrapping paper box on the top. 3. Be careful! Filament and power cable are all placed inside the wrapping paper box. 4. Take out the printer from the box. 08 5. Plug the power cable into the input on the back and turn on the power switch, the touch screen is turned on. Power Switch X: 20.00 Y: 45.00 Z: 36.00 Y X Z Status Language Move Led Calibration Home Buzzer FactoryReset
<
1/3
<
<
2/3
<
6. Click [tools]-[setting] in turn to enter page like this, turn to page two, click [move]. Click the upper arrow in the moving page to make the extruder raises for removing the paper box on the bottom easier. 7. Open the front door, take out the paper box inside the printer, printer unpacking completed. 09 2.2 Accessories 3D Printer Filament (50g) Power Cable After-sales service card SZ16-ZN/EN-A01 Quick Start Guide 9 1. !
2. www.sz3dp.com [ ]
1. Hot! Avoid touching the heating nozzle and heating build plate in operation. 2. Moving parts in printer may cause injury. Do not wear gloves or other sources of entanglement in operation. Download Please refer to FlashForge official website www.flashforge.com to download the newest User's Guide, Software and Instruction Videos.
(Support-Support Center-Select a Product) Adventurer3 3D This guide is only applicable to FLASHFORGE Adventurer3 3D printer User Guide Screwdriver Unclogging Pin Tool Allen Wrench Grease 10 2.3 Interface Menus Intrduction 2.3.1 Build Build Tools Filament 6.62GB Read the print file from:
The local memory card Not Available The USB stick No job The Cloud Back: Back to upper interface 1. Tap [Print]. 2. Choose the read path of the print file File list. Ship-PLA.gx 20mm_Box-
PLA.gx Select all Ship-PLA.gx 20mm_Box-
PLA.gx
<
1/1
<
<
1/1
<
3. File list Tap to begin printing; tap the picture of the selected file to enter file details. Page-flip: Tap the left/right arrow. Long press the file picture or file name, quit out multi-selected interface, you can select all, copy delete . Tap to quit out multi-selected interface. 1/3
<
<
11 20mm_Box-P... h min 0 10 m 0.7 File details: Including file picture, time needed, filament needed. Build: To begin printing the file. Copy: To copy the files to the local memory card from the USB stick. Delete: To delete the print file. Print interface 20mm_Box-PLA.gx 0 h10 min Time Remaining
... .. Cancel: To cancel the print job. Pause/Resume: To suspend or resume the print job. More: To check more settings and details information during printing. 235
/235 100 /100 0 1h min 8
%
0.7 M warrior.gx 2 h18 min
... More Replace: To change filament during printing progress. Led Light: To turn on or turn off the led light. Detail: To check more detail information. 12 Details Extruder temperature Build plate temperature can be adjustedduring printing (Tap to adjust after underline appears as pictures showed. ) Used time Printing progress Whole filament needed 235
/235 100 /100 235 Yes No 2.3.2 Tools Build Tools Filament Network Preheat Setting About Network: To connect printer to your PC or internet. Preheat: To preheat the extruder and build plate. Setting: To implement relevant function setups. About: Information about the printer. 2.3.2.1 Network WiFi WiFi Hotspot Cloud Ethernet 123 abc
%#
1 6 2 7
. 3 8 _ 4 9 5 0 WiFi Flashforge Choose a network ChinaNet-AnCr TP-LINK_EDC2 QS_1234
<
1/3
<
ON/OFF: To turn on/off the WIFI connection. WiFi connection: To connect your printer with your PC via a stable WIFI signal. 13 Hotspot WLan hotspot Setup WLan hotspot WiFi Hotspot SSID:
Password:
SSID:
Password:
Cloud Ethernet Setup hotspot Save 123 1 6
, abc 3 8 _ 2 7
.
%#
5 0 4 9 To set your printer as a WLAN hotspot. Turn on/off the WLAN hotspot. Hotspot setting: To set the hotspot name and password. Input hotspot name with numbers, characters and symbols. Tap to save the name and password. Ethernet Connection WiFi Hotspot Cloud Ethernet Please connect the cable Connected successful To connect your printer with your PC via Ethernet cable. 14 Cloud Connection Network Preheat WiFi Hotspot Setting About Cloud Ethernet FlashCloud PolarCloud FlashCloud Printer Name:
Flashforge Registration Code:
ABCDEF PolarCloud Account:
PIN Save 1. Turn on the WiFi or Ethernet connection, connect the printer to internet successfully. 2. Tap[Tools]-Tap[Network]-Tap[Cloud] on the printer;
3. Turn on the Cloud Connection function;
4. Register your cloud account and set your settings on https://cloud.sz3dp.com with the registration code on printer's touch screen, or register your cloud account on https://polar3d.com to get your polar3d account and pin code. 15 2.3.2.2 Preheat setting Network Preheat Setting About Extruder Platform 220 50 Start ON/OFF: Turn ON/OFF the extruder or platform preheat;
Tap symbol, you could set preheat temperature;
Long press symbol, set preheat temperature rapidly;
Extruder/Platform preheat interface Extruder 235/235 Extruder 235/235 Platform 75/100 Abort Abort It contains actual temperature, target temperature and heating progress. Extruder highest preheat temperature: 240 Platform highest preheat temperature: 100 Tap : Abort the preheat job. Abort 16 2.3.2.3 Setting Network Preheat Status Language Move Led Setting About Calibration Home Buzzer FactoryReset
<
1/3
<
<
2/3
<
Update
<
3/3
<
Status Status Language Setting interface Status Home Language Calibration Move Led Buzzer FactoryReset Update 20 20 Load Calibration Home X: 20.00 Y: 45.00 Z: 36.00
<
1/3
<
It displays the real-time coordinates of X-axis, Y-axis, Z-axis and the real-time temperature of extruder and platform. 17 Language Status Language Calibration Home Fr
<
1/3
<
<
1/2 Choose the target language. En De Es
<
Click the arrow to adjust the nozzle so that it just touches the platform Z axis 0.00 Extruder OK Status Language Calibration Home
<
1/3
<
Ar
<
2/2
<
Calibration To calibrate the initial distance between extruderand platform. After homing completedslide the piece of paper continuously back and forth between the nozzle and the build plate. And simultaneously manually tap up and down arrow to adjust the distance until the paper causes a slight friction. Tap [OK] to complete calibration. Up arrow: Extruder will elevate, away from the platform;
Down arrow: Extruder will descend, move close to the platform;
Home Status Language Calibration Home
<
1/3
<
Homing, please wait... Homing completed Yes Yes To make the X, Y and Z axes back to the mechanical zero point. 18 Move Led Buzzer FactoryReset
<
2/3
<
Move Led Buzzer FactoryReset
<
2/3
<
X: 20.00 Y: 45.00 Z: 36.00 Z Z Y Y X X Manual:
To manually adjust the positions of extruder and build plate. Extruder moves to the right;
Extruder moves to the left;
Build plate moves to the front;
Build plate moves to the back;
Extruder moves upward;
Extruder moves downward;
Led: To turn on/off the light. Buzzer: To turn on/off the buzzer. Factory Setting: Delete all data in internal memory, return the printer to factory setting. 19 Update Factory Setting Delete all data in internal memory Completed!
Restored to factory setting
<
3/3
<
Start ok Update: To update printer firmware. 2.3.2.4 About:
Machine Type:
Adventurer 3 Lite Serial No:
123456 RegisterCode:
XXXXXX Polar Serial No:
XXXXXX
<
1/3
<
Firmware Version:
v1.03-1.1 Build Volume:
150 x 150 x 150 Usage counter:
12 hours IP Address:
10.90.243.184: 8899
<
2/3
<
WiFi MAC:
02:00:00:00:11:66
<
3/3
<
Shows the basic information about the printer. Notice: When contacting after-sales support, please give your Serial No to after-sales engineer, which is showed in the [About] interface. 20 2.3.3 Filament Load Change 200/235 235/235 235/235 Heating extruder... Preheat completed. Begin loading. Press ok when new color appears Cancel ok ok Load
The extruder is heated up to 235.
After heat completed, insert the filament into the extruder at an upright angle until some resistance is sensed(as the filament is pushed through the feeding wheel).
Load will complete when you see filament come out of extruder. 235/235 235/235 235/235 Unloading the filament, please wait... Pull out old filament, feed new filament, press [ok]. Press ok when new color appears ok ok Load Change Change
The extruder is heated up to 235, after heat completed, filament will be unloaded from the extruder.
Pull out the filament according to the instruction.
Insert new filament into the filament intake, tap [OK] ;
New filament will be pushed into the extruder, replace will complete when you see new filament come out of extruder. 21 2.4 Print Plug the power cable into the input on the right side and turn on the power switch, the touch screen is turned on. Power Switch 2.4.1 Load Filament 1. Open the filament cover, insert the filament into the filament intake, push filament into the feeding wheel until some resistance is sensed. Note: Please make sure filament has been pushed into the feeding wheel, but do not push too much. 22 Build Tools Filament Load Change 200 /235 Heating extruder... Cancel 2. Tap [Filament]--Tap [Load]--After Load completed--Tap [OK]
235 /235 235 /235 Preheat completed, Begin loading... Press ok when new color appears ok ok 3. Load completed when you see filament come out of extruder, Tap [OK]. Put the spool of filament on the spool holder, close the filament cover. Mind the loading direction of filament, make sure to be clockwise as the picture showed. 23 2.4.2 Model File Transfer After generating the Gcode file, you can transfer it to your Adventurer 3 Lite with different network methods. If use USB stick to print, please insert your USB stick with target .g/.gx file to your Adventurer 3 Lite, there will be no need to set new network. Method 1 :
WiFi Connection Network Preheat WiFi Hotspot Setting About Cloud Ethernet 1. Tap [Tools]--Tap [Network]--Tap [WIFI] ;
WiFi Choose a network Flashforge ChinaNet-AnCr TP-LINK_EDC2 QS_1234
<
1/3
<
123 abc
%#
1 6 2 7
. 3 8 _ 4 9 5 0 WiFi Flashforge Choose a network ChinaNet-AnCr TP-LINK_EDC2 QS_1234
<
1/3
<
2. Choose a network and input the password. 3. Open the FlashPrint software, click [Print], then click [machine type], select [Flashforge Adventurer 3 Lite]. Then click [connect to the machine]. 24 4. In the pop up dialog box, the connection mode selects Wi-Fi, and fill in the IP port column with the IP address of the printer. Query IP address clicking [tools] - [about], turn to next page, you can see the IP address. Input completion and click connect. 5. When the connection is succeed, the machine status bar will appear in the lower right corner of the software interface, and the printer icon will be displayed as a connected state. After processing the model in FlashPrint software, click the top print icon. Click
[OK]. Select the appropriate location to save the slice processed files. Notices When the user wants to use the browser to view the images, the printer and PC must be in an intranet (that is, the printer and PC connect to the same router). 25 5. After the software slicing is completed, click [Print]. Then the printer starts preparatory work such as preheating, and automatically starts printing after it is ready. 26 Method 2: Cloud Connection Network Preheat WiFi Hotspot Setting About Cloud Ethernet FlashCloud PolarCloud FlashCloud Printer Name:
Flashforge Registration Code:
ABCDEF PolarCloud Account:
PIN Save Use the cloud connection to process printing operation.
* The use of FlashForge cloud is in 2.4.3.1 section. 27 2.4.3 Print Build Tools Filament 6.62GB Not Available No job 1. Tap [Build], choose the file path: Printer internal memory, USB stick, Cloud. Ship-PLA.gx 20mm_Box-
PLA.gx
<
1/1
<
2. Choose the model file, tap on its right to start printing; or tap model picture or model name to enterdetail page, tap to start printing. 20mm_Box-P... 0 h 10 min 0.70M 20mm_Box-PLA.gx 0 h 10 min Time Remaining Ship-PLA.gx 20mm_Box-
PLA.gx Build completed!
ok
...
<
1/1
<
3. Extruder will heat up automatically, when heating finishes, the printer will start to build the model. After printing completed, printer will sound a beep and pop out a notice on the touch screen. 28 2.4.3.1 FlashCloud Print FlashCloudCloud.sz3dp.com 1. Register your account on Flashforge cloud:
After activate your account through your email box, login in Flashforge cloud with your account. Login E-mail Password Remember Password Login Forgot password Rigister FlashCloud En Home My Printer
+ Add printer The current printer is empty. Please add a printer My Printer Name Register Code Type State My Model My Job Model Library 2. After login in cloud with your own account, click [My Printer] - click [Add Printer]. FlashCloud FlashCloud En Home My Printer
+ Add printer The current printer is empty. Please add a printer My Printer Name Register Code Type Printer Name State My Model My Job Model Library Add Printer All fields must be filled in Name Registration Code OK Cancel Registration Code ABCDEF 3. Input your printers name and Flashcloud registration code in [Add printer] interface. These information are showed in your printers FlashCloud interface. 29 En En FlashCloud Home My Printer
+ Add printer The current printer is empty. Please add a printer My Printer Name Register Code Type State My Model My Job Model Library 4. Add printer completed. FlashCloud Home My Printer My Model My Job Model Library Flashforge ABCDEF Adventorer 3 Lite Idle User 2018.3.2 3D Model Model Detail Print 5. Choose a model from cloud model library or upload your own model (stl file), click [Print], enter the edit model interface to edit model. FlashCloud Home My Printer My Model My Job Model Library Flashforge Edit model Print para Move Rotate Scale En
-150 X
-150 Y
-150 Z Print 150 150 150 0 0 0 6. In the drop down menu of the printer's name, you can choose the printer which runs this mission. (the printer must be added into 'my printer') 30 Flashforge FlashCloud En Time Remaining 0 h 0 min 0%
21 / 0 21 / 0 Closed Normal Start Cancel 2.4.3.2 Polar Cloud Print 1. Register Polar cloud account. Log in https://polar3D.com to register the account. 2. Query Polar cloud PIN code.
(1). After completing the Polar cloud registration and log in the Polar cloud website, click the icon on the top right corner and click [Settings]. 31 Location Biography Website URL http://www.example.com/profile Email
+ADD Email PIN Code XXXX
(2). Find the PIN Code column below the page, and the shown number is PIN code. 3. Connect the Adventurer 3 Lite to the internet. Choose the appropriate network connection mode in the communication interface to connect the network (see the 2.3.2.1 section of the connection method). 4. Connect the Adventurer 3 Lite to the Polar cloud. PolarCloud Account PIN Save Polar cloud switch Enter the cloud connection interface (click tools >
communication > cloud connection), turn on the Polar cloud switch (After the Polar cloud is turned on the switch will change into green). Fill in the below account and PIN code columns with the account before the registration of Polar cloud and the PIN code queried before, click save. 5. After the connection is completed, you can see the printer's information on the front page of Polar cloud website. 32 6. Click [MY OBJECTS], then click [UPLOAD] to upload the model. 7. Drag and drop the model files that need to be uploaded to the box area or click the box area to select the upload model, then click [UPLOAD] to upload. 33 8. Click [PRINT]. 9. Click [START], the printer starts the cloud task downloading, and starts printing when the download is finished. 34 2.4.4 Model Remove 1. Take out the removable build plate. Notices When printing completed, extruder and build plate may still be hot, please start operating after cooling down!
2. Bend the build plate, the plate will produce certain deformation, seperating the plate away from the bottom of model (Please use a scraper to assist removing when model is too small or big). 35 2.4.5 Replace Filament Load Change 200 /235 Heating extruder... Cancel 1. Tap [Filament]--Tap [Change], extruder will start preheating. 2. Pull out the filament as the picture showed above. 3. Insert new filament into the filament intake and push the filament into the feeding wheel until resistance is sensed. 235 /235 235 /235 235 /235 Unloading the filament, please wait... Pull out filament, feed new filament, press [OK]. Press ok when new color appears. OK OK 4. When new filament come out of extruder steadily, replace is completed, Tap [OK]. 36 2.4.5.1 The switching can be controlled through the Cloud 1. Connect to Polar Cloud The user can turn on or turn off the camera through Polar Cloud. Click Tools->
Communication -> Cloud Connect -> Polar Cloud, enter the settings page of Polar Cloud, click the input boxes of account number and PIN, enter the account number and PIN, click the Start button to connect to Polar Cloud. The account number is the mailbox used for sign-up with Polar Cloud; for the acquisition of PIN. The guide of getting a Polar could account. The Polar cloud account is the register email account. Polar cloud website: www.polar3D.com PolarCloud Account:
PIN:
Save The way of getting PIN code
(1). After registering polar cloud and log in polar cloud webiste, click the upper right arrow, click [Settings]
37 Chapter 3: Q&A Q1. How to solve if the nozzle is clogged Method 1: Tap [Preheat], heat up the extruder to 240, after heating completed, press the air tube joint and pull out the filament guide tube. Check to see whether the filament is bended or filament tip is not smooth, cut filament tip smooth and flat, install the guide tube and filament back, Tap [Load] . Method 2: If method 1 not improving, use an unclogging pin tool to unclog filament. Method 3: If method 1 and method 2 not improving, please replace the nozzle. Q2. How to replace the nozzle ?
Notice Power off before replacing nozzle! Make sure power off operation!
Please make filament tip smooth and flat when cutting off the filament. 1. Press the left and right clips and pull out the nozzle. 2. Push in a length of filament through the filament intake manually, making it long enough to be cut off. 3. Rotate the filament spool anti-clockwise manually, making filament retreat back a little. 4. Press the left and right clips, install the new nozzle back into the extruder, making the nozzle slot and bottom of extruder are on the same level. 5. Tap[Filament] -- Tap[Load], nozzle replace completed when you see filament come out of new nozzle. Clips The buckle is installed in place The buckle is not installed in place Whether the assembly of the sprinkler is in place is judged as follows:
1. When installing, must press the sprinkler hard to the end. 2. Check whether the installation is in place:
( 1 ) Touch the black buckle and white sprinkler's lower shell, make sure no sunken.
( 2 ) Look at the black buckle and white sprinkler's lower shell, make sure there is not a large gap in the contact. 38 Q3. Do we need to do extruder calibration again after replacing nozzle?
Yes, do extruder calibration again to ensure high print quality as minimal error may be caused by extruder installation. Q4. How to solve if displayed temperature is abnormal after replacing nozzle?
Abnormal temperature indicates extruder sensor can not be read, please check the nozzle whether it is well installed. Q5. How to solve if no filament come out of extruder after tap [Build] model file and extruder begins moving normally?
1. Check the filament guide tube, make sure filament has been pushed into the extruder, if not, please tap [Load]. Restart building model file after you see filament come out of extruder. 2. Check the nozzle whether it is clogged or not, if so, please refer to Q1 for resolution. Q6: How to replace the filament ?
1. Tap[Filament]--Tap[Replace], after extruder heating up completed, filament will be unloaded, pull out the filament according to the instruction. 2. Insert new filament into the filament intake and feeding wheel, tap [OK]; New filament will be pushed into the extruder. 3. Replace will complete when you see new filament come out of extruder. Q7: How to take down the model ?
1. Take out the removable build plate. 2. Bend the build plate, the plate will produce certain deformation, seperating the plate away from the bottom of model. (Please use a scraper to assist removing when model is too small or too big). 3.Take down the model. Q8: How to solve if the distance between nozzle and platform is too large(far away) or too small(hit) during printing?
1. Tap[Setting]--Calibration. 2. The extruder homing automatically, moves down some height. 3. Tap up and down arrow to adjust the distance between extruder and platform until extruder is just about to touch platform. 4. Tap[OK], printer will memorize current calibration position and start homing automatically. Q9: Can we use other brand filament which is not produced by Flashforge ?
Adventurer 3 Lite support normal ABS and PLA filament but different brand filament has different ingredients. Adventurer 3 Lite tests out default settings according to the properties of Flashforge ABS and PLA filament. Other brand filament is ok but not recommended for using, if that causes extruder clogging or bad printing quality or other failure, FlashForge will take no responsibility. These problems are not in the warranty of FlashForge . Q10. Is Adventurer 3 Lite compatible with all kinds of AC power input ?
Adventurer 3 Lite is equipped with a built-in 24V/6.5A power supplier, suitable for 110V-240V input voltage. Q11. Is Adventurer 3 Lite capable to be turned off automatically after printing job is finished ?
No. 39 Q12. What kinds of file formats does Adventurer 3 Lite support?
Input: 3mf / stl / obj / fpp / bmp / png / jpg / jpeg files. Output: gx/g files. Q13. Does Adventurer 3 Lite support other cloud platform besides the FlashCloud?
Yes, Adventurer 3 Lite interface is open up to all other cloud platforms. Q14. Is the ABS printing safe?
ABS filament will give off certain poisonous gas when heated up, please put the printer in well ventilated condition when printing ABS. We suggest printing non-toxic PLA filament when printer is used in children activity places. Q15. How to solve if printing result has edge warp?
Method1: Heating up the platform can solve or minimize the problem by increasing adhesion between platform and model. Method2: Adding raft to model when slicing in FlashPrint. Method3: Apply the solid glue to platform before printing. Q16. Is it a must to add a raft before printing the model?
Not necessarily, much more filament will come out of extruder when printing the raft, increasing printing success. Heating up the platform also increases printing success by increasing adhesion between platform and model. Q17. After replacing nozzle completed, printer status displays extruder temperature is 300, extruder fan is also working, what is the problem and how to slove?
The new nozzle is not properly installed, extruder temperature can not be read and the displayed extruder temperature is abnormal. Please plug out and install the nozzle again, push nozzle to the end, make sure the nozzle slot and bottom of extruder are on the same level. Q18.The extruder makes out chug noise and no filament come out of extruder, what is the problem and how to slove ?
Filament has not loaded into extruder, making out chug noise,more likely the nozzle is clogged or filament guide tube is not properly installed. Check the guide tube joint first, if the guide tube is normal, refer to Q1 for resolution. Q19.What is the difference between filament load and filament replace ?
Load: Only include loading filament into extruder;
Replace: Include loading and unloading two functions, first unloading and then loading filament. Q20. Adventurer3 Lite starts printing when the distance between extruder and build plate is still large,causing filament can not stick to build plate and print fails. Do the printer Calibration again or do the Homing again, then print again to check result. Q21. You cannot find printing files when you use USB driver. USB driver file is not corrected. Adventurer 3 Lite only supports FAT32 file system, please form at USB driver into FAT32 file system. 40 Daily Maintenance Instruction:
Please apply lubricate grease to printer guide rods if you do not use it for long,or do the same maintenance once a month. Chapter 4: Supports and Service FlashForge team is on standby and ready to help you with any challenges you may have with your Adventurer 3 Lite. If the issues or questions are not covered in this User Guide, you can seek for solutions on our official website or contact us via telephone. There are solutions and instructions to common issues that can be found in our knowledge base. Have a look first as most basic questions are answered there. www.FlashForge.com The FlashForge support team can be reached by e-mail or phone between the working hours of 8:00 a.m. to 5:00 p.m. PST Monday through Saturday. In case you contact us during off-duty time, your inquiry will be answered the following business day. Note: Because of changing different filament the extruder maybe blockaded. Its not owing to quality issue, and outside the scope of 400 hours life. If users encounter this problem, please contact our after-sale department and finish clean work according to their instruction. Tel: 400-699-1063 QQ: 2850862986 2850863000 2853382161 Email: support@ff3dp.com aftersales@flashforge.com ADD: No. 518, Xianyuan Road, Jinhua, Zhejiang, China. When contacting support, please have your serial number ready. The serial number is a bar code on the back of your Adventurer 3 Lite. S/N: FFAD******
41 Scan QR to Get More After-Sales Support Twitter Facebook Official Website
1 | Label and Location | ID Label/Location Info | 122.95 KiB |
FCC ID LABELING AND LOCATION FCC ID Label This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID Label Location The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)
1 | Agent Authorization Letter | Cover Letter(s) | 28.97 KiB |
Zhejiang Flashforge 3D Technology CO., Ltd. Agent Authorization Letter Zhejiang Flashforge 3D Technology CO., Ltd.
(2019/06/20) Eurofins MET Labs 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern:
We, the undersigned, hereby authorize Shenzhen HUAK Testing Technology Co., Ltd. (jim he) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, City and Country:
Signature:
(or official company stamp) Name:
(this must be a person) Function:
Date:
Jinhua, Zhejiang 2019/06/20 Qian Wang Machinists Helper No. 518, Xianyuan Road, Jinhua, Zhejiang, China Telephone No.: 0571-89774128 E-mail: wq@sz3dp.com
1 | Long Term Confidentiality Request Letter | Cover Letter(s) | 28.57 KiB |
Zhejiang Flashforge 3D Technology CO., Ltd. Long Term Confidentiality Request Letter
(2019/6/20) Eurofins MET Labs 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR :
Product: 3D Printer M/N: Adventurer 3 Lite FCC ID: 2AKLL-AD3-LITE To Whom It May Concern:
This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the (Operational Description, Block Diagrams, Schematics Diagrams) required to be submitted with this application be permanently withheld from public review. the above documents are company proprietary information that could never get into the possession of your competition. Please contact me if there is any information you may need. Sincerely, City and Country:
Signature:
(or official company stamp) Name:
(this must be a person) Function:
Date:
Jinhua, Zhejiang 2019/6/20 Qian Wang Machinists Helper No. 518, Xianyuan Road, Jinhua, Zhejiang, China Telephone No.: 0571-89774128 E-mail: wq@sz3dp.com
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2019-06-28 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2019-06-28
|
||||
1 | Applicant's complete, legal business name |
Zhejiang Flashforge 3D Technology CO., Ltd.
|
||||
1 | FCC Registration Number (FRN) |
0026099036
|
||||
1 | Physical Address |
No. 518, Xianyuan Road
|
||||
1 |
Jinhua, Zhejiang
|
|||||
1 |
China
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
j******@metlabs.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
2AKLL
|
||||
1 | Equipment Product Code |
AD3-LITE
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
Q****** W****
|
||||
1 | Title |
Machinists Helper
|
||||
1 | Telephone Number |
0571-********
|
||||
1 | Fax Number |
N/A********
|
||||
1 |
w******@sz3dp.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Shenzhen HUAK Testing Technology Co., Ltd.
|
||||
1 | Name |
J****** Z****
|
||||
1 | Physical Address |
1F, B2 Building, Junfeng Zhongcheng Zhizao
|
||||
1 |
Shenzhen
|
|||||
1 |
China
|
|||||
1 | Telephone Number |
86-75********
|
||||
1 |
j******@cer-mark.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 3D Printer | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Output Power listed is peak conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter device. The device supports 20MHz and 40MHz bandwidth. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Shenzhen HUAK Testing Technology Co., Ltd.
|
||||
1 | Name |
J****** Z****
|
||||
1 | Telephone Number |
+86-7********
|
||||
1 |
j******@cer-mark.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2412 | 2462 | 0.034 | ||||||||||||||||||||||||||||||||||||
1 | 2 | 15C | 2422 | 2452 | 0.0074 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC