BTE004 Bluetooth mono headset User Manual
Brief introduction.2 1. Bluetooth Wireless communication technology.2 2. About BTE004.2
Before using..2 1. Overview2 2. Charging the battery of the headset.3
Basic operation..3 1. Switching on/off the headset3 2. Pairing the headset with Bluetooth mobile phone.3 3. Wearing the headset..4 4. Changing the faceplate..5 5. The operation of the headset6 6. LED indicator..7 7. Indication tone.7
Care and maintenance7
Specification.8 Welcome to use this Bluetooth headset, BTE004. Please read this uer manual carefully before using it.
Brief introduction 1. Bluetooth Wireless communication technology Bluetooth is a standard of close range radio communication technology that was drawn up by Ericsson, IBM, Internet, Nokia and Toshiba. Through Bluetooth technology, we can achieve the highest transmission rate among mobile phone, computer, printer, PDA and other devices. The max transmit range of class 2 is 10 meters while the max radio-communication range of class 1 can reach up to 100 meters. 2. About BTE004 BTE004 is a Bluetooth headset. It has the following features:
Answer call, end call and reject call
Redial last call
Voice dial (The function needs your mobile phone to support)
Adjust volume
Voice transfer
Microphone mute
The function of changing faceplate
Before using 1. Overview
(MFB) LED indicator light 1 Multi-function button 2 Charging socket 3 4 Microphone 5 Volume up 6 Volume down 7 Loudspeaker 8 Ear cap 9 Ear hook 2. Charging the bettary of the headset First usingYou must charge the battery of the headset fully before first using. Low powerThe red indicator light will flash and you can also hear 3 tones of DU every 20 seconds. At this time, you have to charge the battery of the headset. The charging steps are as follows:
Step1: Connect charger or charging cable to standard power outlet;
Step2: Connect the end of charger or charging cable to charging socket of the headset;
charge the battery fully;
Step3: When charging, red indicator light is on. It takes about 1 1.5 hours to Step4: When charging has completed, the red indicator light will switch off. Note: If charging via a USB port, this USB port is used only for charging purposes, no any data is transferred over the USB port. Warning: 1. The battery is recycled. Explosion.
Basic operation 1. Switching on/off the headset 2. Do not dispose of the battery in fire, as it may cause Function Switch on the headset Switch off the headset Operation Long press MFB seconds, and indicator light is on Long press MFB seconds, and indicator light is off for 3 it release for 3 it release 5 till 5 till Enter into pairing mode When the headset is off, long press MFB for 7 8 seconds indicator LED light Blue indicator light is on for 1 second indicator Red light is on for 1 second and then all indicator lights are off Red and blue LEDs flash alternately Indication tone A long DI and a long DU tones A long DI tone Nothing Remark: The headset will switch off automatically if no devices can be connected after 10 minutes in order to save power. 2. Pairing the headset with Bluetooth mobile phone You have to pair the Bluetooth headset with Bluetooth mobile phone before first using the headset. Please make sure your mobile phone has bluetooth function that is available. Specific pairing procedures may vary with different mobile phones. Please refer to your mobile phone user manual for further information. The steps are as follows:
1) 2) 3) Keep the headset and Bluetooth mobile phone within 1 meter when pairing. Make sure your headset is off. Press MFB for about 7 8 seconds, then release it till you see the red and blue indicator lights to flash alternately or hear indication tone for three times (The first tone is DI, the second one is DU and the third one is Dong-dong). The headset entered into pairing mode. Switch on Bluetooth function of mobile phone and search the Bluetooth device. After searched, select BTE004 in the Bluetooth device list. According to indication, enter password or PIN No:1234, and press the key of Yes or confirm. After successful pairing, select BTE004 in the Bluetooth device list, and press connect. After successful connecting, the indicator light will flash twice every 4 seconds. 4) 5) 6) Remark:
The pairing mode will last 2 minutes. The headset will switch to standby mode automatically if it cant pair with any devices after 2 minutes. If you want to continue to pair the headset with Bluetooth device, please switch off the headset firstly, and then re-pair according to steps 1 6 mentioned above.
After pairing is successful, the headset and mobile phone will remember each other, no need to re-pair when use next time.
When you switch on the headset every time, it will connect with last connected device automatically. If you want to pair it with other devices, please switch off Bluetooth function of last connected devices firstly, then pair the headset with new device according to steps 1 6 mentioned above. 3. Wearing the headset This headset is suitable for both ears. The ear hook can turn freely. After wearing the headset well, please turn the microphone of the headset towards to the mouth of user, the effect of conversation will be better. Suitable for right ear Suitable for left ear
4. Changing the faceplate 1) . Take down the faceplate 2) . Install new faceplate headset 5. The operation of the headset The status of the Function Cancel calling Calling Ringing Answer call Ringing Reject call Conversation mode End call Conversation mode Volume up Volume down Conversation mode Conversation mode Voice transfer Conversation mode Microphone mute Cancel mute Conversation
(microphone mute) mode Voice dial Redial call last Standby mode (already connected with Bluetooth device) Standby mode (already connected with Bluetooth device) Operation Short press MFB once to cancel calling Short press MFB once Long press MFB for about 2 seconds, and release it till hearing indication tone Short press MFB once Short press volume +
Short press volume -
Long press volume+ button for about 2 seconds, and then release it till hearing indication tone Press simultaneously volume+ button and volume button for about 2 seconds, and then release them till hearing indication tone. When the microphone is mute, the headset sounds a short DU tone every 5 seconds Press simultaneously volume+ button and volume - button for about 2 seconds, and then release them till hearing indication tone Long press VOL + button for about 2 seconds, and then release it till hearing indication tone Short press MFB 2 times Warning: Excessive pressure from earphones and headsets can cause hearing loss. Remarks:
Not all the mobile phones support all the functions listed above. Please refer to your mobile phone user manual for further information.
Some functions and indication tones may vary with different mobile phones.
For some mobile phones, when you press the answer button on the phone, the conversation will be sent to the mobile phone. At this time, you may switch the call to the headset through the conversation switching function of the headset or operating on your mobile phone. Please refer to your mobile phone user manual for further information. 1) 2) 6. LED indicator light When it is charging LED indicator light The red indicator light is on The red indicator light is off When it is not charging LED indicator light The red and blue indicator lights flash alternately The blue indicator light flashes 1 time every 1 seconds The blue indicator light flashes 2 times every 4 seconds The blue indicator flashes 1 time every 1 seconds The blue indicator light flashes quickly The red indicator light flashes 7. indication tone Indication tone It sounds a tone of DU every 5 seconds It sounds three tones of DU every 20 seconds The status of the headset Charging Finish charging The status of the headset Pairing mode Standby mode (not connected with Bluetooth device) Standby mode (already connected with Bluetooth device) Coming call/calling Conversation mode Low power The status of the headset Microphone mute Low power
Care and maintenance Please read the following suggestions carefully, that will help you to fulfill any warranty obligations and enjoy this product for many years.
Keep dry and dont put it in the dump place, so as not to affecting the interior circuit of product.
Dont put the product under the sunlight or place in hot areas. High temperature will shorten the life of electronic device, destroy the battery, or distort certain plastic.
Dont expose the product in the cold areas. It may damage the internal circuit board.
Dont try to take apart the product. It may damage the product if you are not professional.
Dont fall off on the floor or knock the hard substance. It may damage interior circuit.
Dont use intensify chemical or detergent to clean the product.
Dont scrap the surface with sharp things. If the product cant work normally, please send it to the regularly asserted store. The staff will help you to solve the problem warmly.
Specification Bluetooth version Bluetooth profiles Frequency response Effective range Working time Standby time Charging input Charging time Working temperature Storage temperature Dimension Weight Bluetooth V2.0 Headset, Handsfree 2.4GHz 2.4835GHz 10m 6-7hours 100 hours DC 5V 90mA About 1.5 hours
-20 55
-20~70
57*16*9mm Headset: 9g Ear hook: 1g This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.