BTH069 Bluetooth stereo headset Users manual Contents
Brief introduction.........1
Before use..1 1. Overview...1 2. Charging for headset...2
Using the headset..2 1. Turning on/off the headset...............2 2. Wearing the headset.3 3. Pairing/connecting .....3 1) How to enter Pairing mode......3 2) Pairing headset with Bluetooth cell phone......4 3) Pairing headset with Bluetooth transmitter.4 4. Making calls with the headset.5 5. Playing music..6 6. LED indicator..........7 7. Factory Reset...7
Care and maintenance....8
FAQs.....8
Specification.....9 Welcome to use this Bluetooth headset, BTH069. Please read this users manual carefully before use.
Brief introduction BTH069 is a Bluetooth stereo headset. It is concise, vogue, and easy to operate. You can use it to make a call and listen music wirelessly.
Before use 1. Overview Retractable headband Volume up button Volume down button 1 2 3 4 Multi-functions Button(MFB) 5 6 7 LED indicator Micro USB charging jack Microphone 1 2.Charging for headset BTH069 comes with a built-in rechargeable battery, prior to using it, it is recommended to charge the battery fully for the first time. When the red LED of headset flashes twice and emits dong dong tones every 20 seconds. It means battery low. Please recharge the battery fully. 1. Plug the USB charging cable to the port of PC 2. Plug the USB charging cable into the charging jack of the headset Red light on: Charging Red light off: Finish charging 3. It will takes about 2.5 hours to finish charging Warning:
1) The battery is recyclable. 2) Batteries (battery pack or batteries installed) shall not be exposed to excessive heat place such as sunshine, fire or the like. Using the headset 1. Turning on/off the headset Functions Turning on Turning off Operation LED indictor Press and hold MFB button for 4 seconds Press and hold MFB button for 4 seconds Blue LED on for 1 second Red LED on for 1 second Prompt tone Power on Power off Remark: In order to save power, the headset will turn off automatically if no devices can be connected after 5 minutes. 2 2. Wearing the headset The headset is designed as retractable style. Please adjust it according to the actual use. The logo L corresponds to the left ear, and the logo R corresponds to the right ear. Please wear the headset according to the indicator. 3. Pairing/connecting 1) How to enter pairing mode Functions Operation LED indicator Prompt Enter pairing mode Ensure the headset is offpress and hold MFB button for 8 seconds Red and blue LED flashes alternately tone DIDI Remarks: Paring mode will last 2 minutes, if no devices can be connected over 2 minutes, the headset goes to standby mode automatically. 3 2)Pairing headset with Bluetooth cell phone Prior to using the headset for the first time, you have to pair it with a Bluetooth-enabled cell phone. The general pairing steps are as follows:
(1)Keep the headset and your Bluetooth cell phone within 1 meter when pairing, the closer the better.
(2)Make the headset enter into paring mode.( Please refer to How to enter pairing mode.)
(3)Activate your cell phones Bluetooth function and search for Bluetooth devices within range, select BTH069 from the list of devices shown. After successful connecting, blue LED of headset flashes twice every 5 seconds Remarks:
After successful pairing, the paired devices will remember each other, they will no need to pair next time. The headset will connect with last connected device automatically when you turn it on again.
When the headset not connected with device, short press MFB button once, the headset will try to connect with last connected device. the headset
After enter pairing mode , the headset would not connect automatically. If you need to pair it with other devices, please pair the headset with new device according to the steps mentioned above. 3Pairing headset with Bluetooth transmitter You can connect the headset with a Bluetooth transmitter to enjoy music wirelessly. Hereby take BTT005 for example (not included in accessory). The pairing steps are as follows:
(1)Keep and Bluetooth transmitter within 1 meter when pairing, the closer the better.
(2)Make the headset enter pairing mode.
(Please refer to How to enter pairing mode.)
(3)Turn on the Bluetooth transmitter and make it enter pairing mode. It will search for Bluetooth devices automatically and send a pairing request; After successful pairing and connecting, blue LED of the headset flashes twice every 5 seconds. 4 Remarks:
The pairing password of the headset is 0000. So, the headset can only pair with a Bluetooth transmitter whose pairing password is 0000. The headset does not support the Bluetooth transmitter whose pairing password is not 0000.
After successful pairing, the paired devices will remember each other, they will no need to pair next time. The headset will connect with last connected device automatically when you turn it on again.
If you fail to pair for many times, please read the users manual of Bluetooth transmitter carefully. 4. Making calls with the headset 1) Basic operation:
Functions Cancel a call Answer a call Reject a call Status of headset Calling Incoming ringing Incoming ringing End a call Volume up Volume down Transfer conversation to mobile phone. Transfer conversation to headset. Microphone mute Cancel mute Voice dial Redial the last number During a call During a call During a call During a call During a call During a call During a call
(microphone mute) Standby mode
(connected device) Standby mode
(connected device) 5 Operation Short press MFB once Short press MFB once Long press MFB for 2 seconds and release it until listen a tone. Short press MFB once Short press volume up button Short press volume down button Long press MFB for 2 seconds Long press MFB for 2 seconds Double click MFB Double click MFB Long press MFB for 2 seconds and release it until listen a tone. Double click MFB Operation Short press MFB once Double click MFB Double click MFB 2)Three-ways call operation Functions Answer new call and end current call Answer new call and retain current call Switch calls Status of headset During a call, there are second incoming call Incoming ringing Keep conversation and another call retains Keep conversation and another call retains End current call and switch retain call Remarks:
When the volume is adjusted to max or min, you will hear one prompt Short press MFB once
You will hear Weng tone once every 3 seconds when the microphone tone. mutes.
When pressing the answer button on some mobile phones, the call will be transferred to the mobile phone. You can switch the call to the headset by using the conversation switch button or through operating on the mobile phone. Please refer to your mobile phone user manual for further information. 5. Playing music Functions Volume up Volume down Last song Next song Pause Play Status of the headset Playing music Playing music Operation Short press Volume up button Short press Volume down button Playing music Playing music Playing music Pausing Long press Volume up button Long press Volume down button Short press MFB once Short press MFB once 6 tone. Remarks:
When the volume is adjusted to max or min, you will hear one prompt
If you want to remote control last/next song, pause/play, it needs your Bluetooth mobile phone or Bluetooth transmitter paired with the headset to support AVRCP profile.
Excessive pressure from earphones and headphones can cause hearing loss. 6. LED indicator LED indicator Red and blue LED flashes alternately Blue LED flashes once every 2 seconds Blue LED flashes twice every 5 seconds Red LED flashes twice every 20 seconds Status of headset Pairing mode Not connected to device Connected to device Low battery 7. Factory Reset In the status of turning off, long press MFB button and volume up button (or volume down button) about 10 seconds and release it until the LED not flashes. Remarks:
After factory reset, the paired list of headset will be deleted. After turn it on again, the headset will enter pairing mode automatically, and you need to re-pair and connect with Bluetooth devices. 7
Care and maintenance Read the following recommendations carefully before using BTH069. Following these you will be able to enjoy this product for many years.
Keep it dry and dont put it in the dump place to avoid the products internal circuit being affected.
Keep the product away from direct sunlight or hot places. High temperatures will shorten the life of electronic devices, destroy the battery or distort certain plastic part.
Dont expose the product to cold areas. It may damage the internal circuit
Dont try to disassemble the product as it may get damaged if you are not
Dont let it fall down onto the floor or other hard surfaces. The internal circuit might get damaged.
Dont use intensive chemical products or detergent to clean the product.
Dont scratch the surface with sharp things. It may get damaged by board. professional. sweat. In case the product doesnt function properly, send it to the store you bought it. The staff will help you to solve the problem
FAQs 1.What does it mean when red LED flashes twice every 20 seconds?
Battery is low power, need to be recharged. 2.Why is the red LED off when charging?
a) Please make sure the charging device connect with headset well;
b) The battery may dry up. Please charge the battery for 30 minutes, and then the red LED will be ON. 3. How far is the effective rang between the headset and mobile phone?
According to the Bluetooth standard, the max available range of Class II headset is 10 meters. It varies under different environment. 4. Why cant I hear the sound on the headset?
a) Make sure the headset has been switched on;
b) Make sure the volume is not too low or muted;
c) Make sure the headset connects with the mobile phone correctly;
d) Make sure the distance between the headset and the cell phone is in the available Bluetooth range. 8 Bluetooth V3.0 HFP,HSP,A2DP, AVRCP 10 meters Up to 11hours Up to 12 hours Approx 250 hours DC 5V Approx 2.5 hours 5. Why cant I hear the sound clearly on the headset?
a) Make sure the mobile phone is in the strong signal area;
b) Make sure the headset is in the available range of this product. 6. Why the pause/play, last/next song not function when playing music?
Make sure your Bluetooth device supports AVRCP (Audio/Video Remote Control profile)
Specifications Bluetooth version Bluetooth profiles Operating distance Music time Talk time Standby time Charging Input Charging time FCC Warning:
Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 500mA 9