FCC ID: SRQ-ZTEA7050 LTE/WCDMA/GSM(GPRS) Multi-Mode Digital Mobile Phone with Bluetooth and WiFi

ZTE A7050

(ZTE Blade V41 Smart) Quick Start Guide 1 LEGAL INFORMATION Copyright 2022 ZTE CORPORATION. All rights reserved. No part of this publication may be quoted, reproduced, translated or used in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. Notice ZTE Corporation reserves the right to make modifications on print errors or update specifications in this guide without prior notice. We offer self-service for our smart terminal device users. Please visit the ZTE official website (at www.ztedevices.mx) for more information on user manual, self-service and supported product models. Information on the website takes precedence. Disclaimer ZTE Corporation expressly disclaims any liability for faults and damages caused by unauthorized modifications of the software. Images and screenshots used in this guide may differ from the actual product. Content in this guide may differ from the actual product or software. Trademarks ZTE and the ZTE logos are trademarks of ZTE Corporation. Android is a trademark of Google LLC. TheBluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by ZTE Corporation is under license. microSDXC Logo is a trademark of SD-3C, LLC. Other trademarks and trade names are those of their respective owners. 2 Getting to Know Your Phone Earpiece Front camera Touch screen Speaker Back cameras and flash Proximity

& light sensor Indicator light Volume key Power key/

Fingerprint sensor Headset jack nano-SIM/

microSDXC card tray Charging/USB Type-C jack Your phone supports 2.4 GHz and 5 GHz Wi-Fi. 3 Setting Up Your Phone The nano-SIM card can be installed or removed while the phone is turned on. WARNING!

To avoid damage to the phone, do not use any other kind of SIM cards, or any non-standard nano-SIM card cut from a SIM card. You can get a standard nano-SIM card from your service provider. 1. Insert the tip of the tray eject tool into the hole on the card tray. NOTE:

Please use the tray eject tool included in the box. Otherwise the card tray may not be ejected. CAUTION:

Never replace the included tray eject tool with sharp objects. Ensure that the tray eject tool is perpendicular to the hole. Otherwise, the phone may be damaged. 4 2. Pull out the card tray and place the nano-SIM card and the microSDXC card (optional) on the tray, as shown. Carefully slide the tray back into place. microSDXC card nano-SI M card Charging the Phone Your phones battery should have enough power for the phone to turn on, find a signal, and make a few calls. You should fully charge the battery as soon as possible. WARNING!

Use only ZTE-approved chargers and USB Type-C cables. The use of unapproved accessories could damage your phone or cause the battery to explode. WARNING!

Do not remove the back cover. The battery is not removable. Removal may cause fire or explosion. 1. Connect the adapter to the charging jack. 5 2. Connect the charger to a standard AC power outlet. 3. Disconnect the charger when the battery is fully charged. NOTE:

If the battery is extremely low, you may be unable to power on the phone even when it is being charged. In this case, try again after charging the phone for at least 20 minutes. Contact the customer service if you still cannot power on the phone after prolonged charging. Powering On/Off Your Phone Make sure the battery is charged before powering on. Press and hold the Power key to turn on your phone. To power off, press and hold the Power key to open the options menu, and touch

. NOTE:

If the screen freezes or takes too long to respond, try pressing and holding the Power key for over 10 seconds to restart the phone. 6 FM Radio Scanning for Channels 1. Plug in a wired headset and open FM Radio. 2. Touch > Scan > OK. Your phone scans for all available channels and saves them to the channel list. Listening to FM Radio 1. Open FM Radio while the headset is connected. 2. Touch > All channels and select a channel. You can also drag the red needle along the frequency panel or touch other channels, or touch current channel frequency. to switch to to adjust the or or NOTES:

Touch to add the channel to favorites. Touch phone speaker. to listen to the radio through the The FM radio feature does not require an Internet connection. 7 Product Safety Information Dont make or receive phone calls while driving. Never text while driving. Keep your phone at least 10 mm away from your body while making calls. Small parts may cause choking. Your phone can produce a loud sound. To prevent possible hearing damage, do not listen at high volume levels for long periods. Exercise caution when holding your phone near your ear while the loudspeaker is in use. Avoid contact with anything magnetic. Keep away from pacemakers and other electronic medical devices. Turn off when asked to in hospitals and medical facilities. Turn off when told to on aircraft and at airports. Turn off when near explosive materials or liquids. Dont use at gas stations. Your phone may produce a bright or flashing light. Dont dispose of your phone in fire. Avoid extreme temperatures. Avoid contact with liquids. Keep your phone dry. 8 Do not attempt to disassemble your phone. Only use approved accessories. For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible. Dont rely on your phone as a primary device for emergency communications. FCC RF Exposure Information (SAR) This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States. During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation of 10 mm. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. The exposure standard for wireless devices employing a unit of measurement is known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. This device is complied with SAR for general population/uncontrolled exposure limits in 9 ANSI/IEEE C95.1-1992 and had been tested in accordance with the measurement methods and procedures specified in IEEE1528. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: SRQ-ZTEA7050. The FCC ID also can be found on the device when you open Settings > About phone > FCC ID. For this device, the highest reported SAR value for usage against the head is 0.73 W/kg, and for usage near the body is 1.03 W/kg. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirements. SAR compliance for body-worn operation is based on a separation distance of 10 mm between the unit and the human body. Carry this device at least 10 mm away from your body to ensure RF exposure level compliant or lower to the reported level. To support body-worn operation, choose the belt clips or holsters, which do not contain metallic components, to maintain a separation of 10 mm between this device and your body. RF exposure compliance with any body-worn accessory, which contains metal, was not tested and certified, and using such body-worn accessory should be avoided. FCC Regulations This device complies with part 15 of the FCC 10 Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CAUTION:

Changes or modifications not expressly approved by the manufacturer could void the users authority to operate the equipment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 11 DATOS ELECTRICOS DE OPERACIN:

Telfono: 3.85 V Adaptador de Corriente ca/cc:

Entrada: 100 240 V ~ 50/60 Hz 0.5 A Salida: 5.0 V 3.0 A / 9.0 V 2.0 A /

12.0 V 1.5 A / 10.0 V 2.25 A MAX 12

38*22MM Marca:ZTE Modelo:ZTE A7050 TELEFONO CELULAR IMEI:XXXXXXXXXXXXXXX S/N:XXXXXXXXXXXX FCC ID:SRQ-ZTEA7050 HECHO EN CHINA 60mm 3.87V IMPORTADOR ZTE CORPORATION DE MEXICO,S. DE R.L. DE C.V. TELEFONO CELULAR LAGO ZURICH NO.245,TORRE FRISCO, PISO 1 COL.AMPLIACION GRANADA, MIGUEL HIDALGO MODELO: ZTE A7050 C.P.11520,CIUDAD DE MEXICO COLOR: XXXXX R.F.C.ZCM-030408-7QA ZTE Blade V41 Smart MARCA: ZTE 35mm CARACTERISTICAS ELECTRICAS Telfono:

3.87V Adaptador de Corriente ca/cc:

Entrada: 100 - 240V 50/60Hz 0.5A Salida: 5.0V 3.0A/9.0V 2.0A/

12.0V 1.5A/10.0V 2.25A MAX HECHO EN CHINA FCC ID: SRQ-ZTEA7050 INCLUYE:

Adaptador de corriente ca/cc Batera recargable(interna) Cable USB CERTIFICADO IFT:

EN TRAMITE NUMERO DE SERIE IMEI:XXXXXXXXXXXXXX Le sugerimos leer la gua de inicio rpido anexa antes de utilizar su telfono. XXXXXXXXXXXX 056566101138 38*12mm Podr consultar en el siguiente enlace las bandas de operacin con las que cuenta el equipo:

https://ztedevices.mx/frecuencias/

MASTER BOX NO.:

CODE:

XXXXXXXXXXXX XXXXXXXXXXXX Model: ZTE A7050 Weight: xxxx g Colour: xxxxx Version:

Quantity: 10 xxxxxxxxxxxxxxx xxxxxxxxxxxxxxx xxxxxxxxxxxxxxx xxxxxxxxxxxxxxx xxxxxxxxxxxxxxx Accessory: XX Category: Handset Box Status: Full HECHO EN CHINA xxxxxxxxxxxxxxx xxxxxxxxxxxxxxx xxxxxxxxxxxxxxx xxxxxxxxxxxxxxx xxxxxxxxxxxxxxx Q/A REQ NO: XXXXXXXXXXXXX Q/A Date:

UNII Declaration Letter We have declared below featured for FCC equipment authorization, device FCC ID: SRQ-ZTEA7050

(1) DFS Device --

Master, Client without radar detection capability, Client with Radar detection capability , N/A

(2) Active / Passive Scanning , adhoc mode access point capability Frequency Band

(MHz) Active Scanning

(the device can transmit a probe

(beacon)) 2412 2462 MHz 2422 2452 MHz 5745 5825 MHz 5755 5795 MHz 5180 5240 MHz 5190 5230 MHz 5260 5320 MHz 5270 5310 MHz 5500 5700 MHz 5510 5670 MHz Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, No No No No No No No No No No passive scanning

(where the device is can listen only with no probes) Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, No No No No No No No No No No Ad Hoc Mode capability Access point capability Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, No No No No No No No No No No Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, No No No No No No No No No No

(3) Country code selection ability -

If no, pls explain how was implemented : use Microsoft network utility Yes , No

(4) Meet 15.202 requirement -

pls check below :

Yes , No , A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network.

(5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes can not be modified by end user or an installer. Apply , No Apply ,

(If apply , pls help to provide explanation on how it was implement (By hardware or software , and how software was controlled) Applicant: ZTE Corporation Address: ZTE Plaza, #55 Keji Road South, Hi-Tech, Industrial Park, Nanshan District,Guangdong Signature: 2022-8-25 Name:Ding Chaijue Job Title: Certification Manager Ersteller:

Erstelldatum:

D. Brandhorst 20.06.2011 Revision:

Datum:

00 00.00.00 Seite 1 von 1

ZTE Corporation PHOENIX TESTLAB GmbH Product Certification Knigswinkel 10 D 32825 Blomberg Date: 2 September 2022 Subject: Declaration Operating Channel Limitation Product Name:LTE/WCDMA/GSM(GPRS) Multi-Mode Digital Mobile Phone Product Model: ZTE A7050 FCC ID:SRQ-ZTEA7050 To Whom it may concern, The operating channels in 802.11 b/g/n mode for the device marketed to the US/Canada are firmware limited to channel 1 ~ 11 (2412 ~ 2462 MHz). The end-user has no possibility to select any other operating channels. If you have any questions, please feel free to contact me. Thank you. Sincerely, Certification Manager ZTE Corporation ZTE Plaza, #55 Keji Road South, Hi-Tech, Industrial Park, NanshanDistrict,Guangdong Telephone: +86-13764330709

ZTE Corporation. ZTE Plaza, #55 Keji Road South, Hi-Tech, Industrial Park, Nanshan District,Guangdong Tel: +86-13764330709 Authorization Letter Date: 2022-8-25 To whom it may concern:

We, the undersigned, hereby authorize The State Radio_monitoring_centerTesting Center (SRTC) to act on our behalf, as our agent, in the followingmatters related to the FCC approval of our product:

Product Name:LTE/WCDMA/GSM(GPRS) Multi-Mode Digital Mobile Phone Product Model: ZTE A7050 FCC ID:SRQ-ZTEA7050 Report submittal, related correspondence, the signing of all documents relating to these matters, and any other lawful activity necessary to obtain such certification. Any act carried out by The State Radio_monitoring_center TestingCenter (SRTC) within the scope of this authorization shall have the same effects as our own. This authorization shall expire 2 months from original date. If you have any question regarding the authorization, please dont hesitate to contact with me. Thank you. Sincerely, ZTE Corporation ZTE Plaza, #55 Keji Road South, Hi-Tech, Industrial Park, NanshanDistrict,Guangdong Telephone: +86-13764330709

ZTE Corporation. ZTE Plaza, #55 Keji Road South, Hi-Tech, Industrial Park, Nanshan District,Guangdong Tel: +86-13764330709 Request of Confidentiality Federal Communications Commission Authorization and Evaluation Division Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, the Applicant hereby requests confidential treatment of information accompanying of following product:

Product Name:LTE/WCDMA/GSM(GPRS) Multi-Mode Digital Mobile Phone Product Model: ZTE A7050 FCC ID:SRQ-ZTEA7050 The following information should be held confidential:

All Schematics/block diagrams/BOM All Parts list for the above schematic diagram Tune-Up Procedure Operational description and technical overview of product The following information should be held short-term confidentialitythe confidentiality period is 180 days:

External photos/Internal photos/Test set up photos/User Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, ZTE Corporation ZTE Plaza, #55 Keji Road South, Hi-Tech, Industrial Park, NanshanDistrict,Guangdong ZTE Corporation. ZTE Plaza, #55 Keji Road South, Hi-Tech, Industrial Park, Nanshan District,Guangdong Tel: +86-13764330709 Telephone: +86-13764330709