h
s
i
l
g
n
E
Front of Earphone
Back of Earphone
Click for 2 times
Technical Specifications
Package Content
True Wireless Stereo (TWS) Bluetooth Earphones x1
Charging Case x1 Type C Charging Cable x1
User Guide x1
Product Illustrations
Disconnect Bluetooth
After the two Earphones are placed into the charging case,
the Bluetooth connection to the device is disconnected
after the charging case is closed.
Clearing Connection Records
Place the two Earphones in the charging case and simultaneously
press and hold the buttons on both Earphones for more
than 10 seconds to clear the pairing records.
Operation Functions
L for the left Earphone
R for the right Earphone
LED Indicator
After the Earphones are placed in the case:
The case is fully charged: The white
light on the case turns on for 4 seconds
and turns off.
Battery level of the case is low:
The white light on the case flashes for 4
seconds and turns off.
Charging the Charging Case:
Charging: The white light on the case flashes.
Fully charged: The white light on the case stays on.
The charging cable is unplugged: The light on the case turns off.
Play/Pause
Previous
Next
Volume+
Volume-
Answer / hang
up the phone
Reject a call
Click for 2 times
Hold the left
Earphone for 2s
Hold the right
Earphone for 2s
Touch the right Earphone
Touch the left Earphone
Click for 2 times
Click for 2 times
Earphone
Charging Case
Bluetooth version
5.0
Type C charging time
1.5 H
Talk time
3.7 H
Capacity
500 mAh
Music playtime
5 H
Weight of the
whole device
37.6 g
Charging time
1.5 H
Dimensions (mm)
53 x 44 x 23
5.Do not wear Earphones continuously for long periods of
time (more than 6 hours), especially listening at maximum
volume;
6.Do not wear Earphones when riding or driving. Such behavior
is illegal in some countries;
7.This product contains a lithium battery. Disassembly, collision,
crushing or exposure to fire is prohibited. Do not use swollen
batteries. Do not place in high-temperature environments.
Please dispose the battery in accordance with local regulations
and do not treat it as household waste.
Environmental protection support
Name and content of hazardous substances in the product
Part Name
Hazardous Substances
Circuit Board
pb
Hg
Cd
CrVI
PBB
PBDE
Plastic Parts
Metal Parts
Speaker
Cable
Battery
Accessories
Charging Case
Type C Charging Cable
Voice Assistant
Click for 3 times
Click for 3 times
Battery capacity
43 mAh
Hold the Earphone for 2s Hold the Earphone for 2s
Frequency range
20 Hz-20 KHz
First Time Use
If the battery level of the Earphones and the charging
case are low when the package is opened for the first
time, please charge for 10 minutes.
Bluetooth Connection
When the charging case is opened and connection is
made for the first time, the Earphones will automatically
turn on and enter the pairing mode with the device;
click "ZTE Buds" in the device list to connect.
If the Earphones have been paired with a device previously,
it will automatically connect to the last connected device
after the case is opened.
Charge the Charging Case
The Charging Case can be charged using a Type C charging
cable. The battery level and charging status can be confirmed
by the battery indicator.
Notes:Please charge by connecting to an adapter with
an output voltage (compatible) of 5 V by using a Type C
charging cable. *If the output voltage of the adapter is
higher than 5 V, it may cause charging failure or even
damage to the product.
Charge the Earphones
Place the Earphones in the charging case. The Bluetooth
connection disconnects and the charging of the Earphones
starts.
Earphone
impedance
32 Ω
Weight (one side)
3.4 g
Warning
1.Do not disassemble, repair or modify the product for any
reason, as this may cause fire, electronic breakdown or even
completely destroy the product;
2.Do not wipe this product with oil or other volatile liquids;
3.Do not leave the device in environments where the temperature
is too high or too low (above 75 degrees or below minus
40 degrees) for an extended period of time.
4.Do not use the device during thunderstorms. Thunderstorms
can cause the device to malfunction and increase the risk
of electric shocks.
This form is prepared in accordance with the provisions of
S1/T11364.
: Indicates that this hazardous substance contained in
all of the homogeneous materials for this part is below the
limit requirement in GB/T26572.
: Indicates that this hazardous substance contained in
at least one of the homogeneous materials used for this
part is above the limit requirement in GB/T26572.
For the part marked with " " in the table, the hazardous
substance cannot be replaced due to limitations of the
global level of technical development.
WEEE
Electrical and electronic equipment, parts and batteries
marked with this symbol must not be disposed of with
normal household wastage, it must be collected and
disposed of separately to protect the environment.
Your EB64G retailer will advise you of the correct way
of disposal in your country.
FCC
The SAR limit of USA (FCC) is 1.6 W/kg averaged over
one gram of tissue. Device types EB64G (FCC ID:
SRQ-EB64G) has also been tested against this SAR limit.
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
NOTE: The manufacturer is not responsible for any radio
or TV interference caused by unauthorized modifications
or changes to this equipment. Such modifications or
changes could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
‐ Reorient or relocate the receiving antenna.
‐ Increase the separation between the equipment and
receiver.
‐Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
‐Consult the dealer or an experienced radio/TV
technician for help.
CE
Batteries(battery pack or batteries installed) shall not be
exposed to excessive heat such as sunshine, fire or the
like.
CAUTION Danger of explosion if battery is incorrectly
replaced. Replace only with the same or equivalent type.
IC
This device contains licence-exempt transmitter(s)/
receiver(s) that comply with Innovation, Science and
Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including
interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d’Industrie
Canada applicables aux appareils radio exempts de
licence.
L’exploitation est autorisée aux deux conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi,
même si le brouillage est susceptible d’en compromettre
le fonctionnement.
IC Radiation Exposure Statement:
This equipment complies with Canada radiation exposure
limits set forth for uncontrolled environments.
This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
Déclaration d’IC sur l’exposition aux radiations:
Cet équipement est conforme aux limites d’exposition
aux radiations définies par le Canada pour des
environnements non contrôlés.
Cet émetteur ne doit pas être installé au même endroit
ni utilisé avec une autre antenne ou un autre émetteur.