| all | frequencies |
|
|
exhibits | applications |
|---|---|---|---|---|---|
| manuals | |||||
| app s | submitted / available | |||||||
|---|---|---|---|---|---|---|---|---|
| 1 2 3 |
|
User manual 1 | Users Manual | 1.20 MiB | May 12 2017 / April 06 2018 | |||
| 1 2 3 |
|
User manual 2 | Users Manual | 4.89 MiB | May 12 2017 / April 06 2018 | |||
| 1 2 3 | Cover Letter(s) | May 12 2017 / October 01 2018 | ||||||
| 1 2 3 | RF Exposure Info | May 12 2017 / October 01 2018 | ||||||
| 1 2 3 | Cover Letter(s) | May 12 2017 / October 01 2018 | ||||||
| 1 2 3 | Test Report | May 12 2017 / October 01 2018 | ||||||
| 1 2 3 | Test Report | May 12 2017 / October 01 2018 | ||||||
| 1 2 3 | Test Report | May 12 2017 / October 01 2018 | ||||||
| 1 2 3 | Test Report | May 12 2017 / October 01 2018 | ||||||
| 1 2 3 | Test Report | May 12 2017 / October 01 2018 | ||||||
| 1 2 3 | Test Setup Photos | May 12 2017 / April 06 2018 | ||||||
| 1 2 3 | Test Setup Photos | May 12 2017 / April 06 2018 | ||||||
| 1 2 3 | Cover Letter(s) | May 12 2017 / October 01 2018 | ||||||
| 1 2 3 | Cover Letter(s) | |||||||
| 1 2 3 | Cover Letter(s) | |||||||
| 1 2 3 | Cover Letter(s) | |||||||
| 1 2 3 | External Photos | |||||||
| 1 2 3 | ID Label/Location Info | |||||||
| 1 2 3 | Internal Photos | |||||||
| 1 2 3 | Cover Letter(s) | |||||||
| 1 2 3 | Test Report | |||||||
| 1 2 3 | Test Report | |||||||
| 1 2 3 | Test Setup Photos | |||||||
| 1 2 3 | Test Report | |||||||
| 1 2 3 | Test Report |
| 1 2 3 | User manual 1 | Users Manual | 1.20 MiB | May 12 2017 / April 06 2018 |
Users Guide NWA/WAC Series 802.11 a/b/g/n/ac Unified Access Point Default Login Details LAN IP Address DHCP-assigned User Name Password OR http://192.168.1.2 admin 1234 Version 5.10 Edition 1, 10/2017 Copyright 2017 Zyxel Communications Corporation IMPORTANT!
READ CAREFULLY BEFORE USE. KEEP THIS GUIDE FOR FUTURE REFERENCE. This is a Users Guide for a series of products. Not all products support all firmware features. Screenshots and graphics in this book may differ slightly from your product due to differences in your product firmware or your computer operating system. Every effort has been made to ensure that the information in this manual is accurate. Related Documentation Quick Start Guide The Quick Start Guide shows how to connect the NWA/WAC and access the Web Configurator. CLI Reference Guide The CLI Reference Guide explains how to use the Command-Line Interface (CLI) and CLI commands to configure the NWA/WAC. Note: It is recommended you use the Web Configurator to configure the NWA/WAC. Web Configurator Online Help Click the help icon in any screen for help in configuring that screen and supplementary information. More Information Go to support.zyxel.com to find other information on the NWA/WAC. NWA / WAC Series Users Guide 2 Document Conventions Warnings and Notes These are how warnings and notes are shown in this guide. Warnings tell you about things that could harm you or your device. Note: Notes tell you other important information (for example, other things you may need to configure or helpful tips) or recommendations. Syntax Conventions All models in this series may be referred to as the NWA/WAC in this guide. Product labels, screen names, field labels and field choices are all in bold font. A right angle bracket ( > ) within a screen name denotes a mouse click. For example, Configuration >
Network > IP Setting means you first click Configuration in the navigation panel, then the Network sub menu and finally the IP Setting tab to get to that screen. Icons Used in Figures Figures in this guide may use the following generic icons. The NWA/WAC icon is not an exact representation of your device. NWA/WAC Router Switch Internet Server Desktop Laptop AP Controller NWA / WAC Series Users Guide 3 Contents Overview Contents Overview Users Guide ......................................................................................................................................12 Introduction ........................................................................................................................................... 13 The Web Configurator ......................................................................................................................... 35 Setup Wizard ......................................................................................................................................... 47 Technical Reference ........................................................................................................................53 Dashboard ............................................................................................................................................ 54 Monitor ................................................................................................................................................... 60 Network ................................................................................................................................................. 75 Wireless ................................................................................................................................................... 84 Bluetooth ............................................................................................................................................... 97 User ....................................................................................................................................................... 100 AP Profile .............................................................................................................................................. 107 MON Profile ......................................................................................................................................... 126 WDS Profile ........................................................................................................................................... 130 Certificates .......................................................................................................................................... 132 System .................................................................................................................................................. 148 Log and Report ................................................................................................................................... 173 File Manager ....................................................................................................................................... 185 Diagnostics .......................................................................................................................................... 196 LEDs ...................................................................................................................................................... 198 Antenna Switch .................................................................................................................................. 200 Reboot ................................................................................................................................................. 202 Shutdown ............................................................................................................................................. 203 Troubleshooting .................................................................................................................................. 204 NWA / WAC Series Users Guide 4 Table of Contents Table of Contents Document Conventions ......................................................................................................................3 Contents Overview .............................................................................................................................4 Table of Contents.................................................................................................................................5 Part I: Users Guide.......................................................................................... 12 Chapter 1 Introduction ........................................................................................................................................13 1.1 Overview ........................................................................................................................................ 13 1.1.1 Management Mode ............................................................................................................. 17 1.1.2 MBSSID .................................................................................................................................... 18 1.1.3 Dual-Radio ............................................................................................................................. 19 1.1.4 Root AP ................................................................................................................................... 19 1.1.5 Repeater ................................................................................................................................ 20 1.2 Ways to Manage the NWA/WAC ................................................................................................. 21 1.3 Good Habits for Managing the NWA/WAC ................................................................................ 22 1.4 Hardware Connections ................................................................................................................. 22 1.5 NWA5301-NJ Hardware ................................................................................................................. 22 1.5.1 110 Punch-Down Block ......................................................................................................... 22 1.5.2 Phone Port ............................................................................................................................. 24 1.5.3 Console Port .......................................................................................................................... 24 1.6 LEDs .................................................................................................................................................. 25 1.6.1 WAC6502D-E, WAC6502D-S, and WAC6503D-S ................................................................ 25 1.6.2 NWA1123-AC PRO and WAC6103D-I ................................................................................. 27 1.6.3 NWA5301-NJ .......................................................................................................................... 29 1.6.4 NWA1123-ACv2, NWA5121-N, NWA5121-NI, NWA5123-AC and NWA5123-NI .............. 30 1.6.5 WAC5302D-S .......................................................................................................................... 31 1.6.6 NWA1123-AC HD, NWA5123-AC HD and WAC6303D-S ................................................... 32 1.7 Starting and Stopping the NWA/WAC ......................................................................................... 33 Chapter 2 The Web Configurator........................................................................................................................35 2.1 Overview ......................................................................................................................................... 35 2.2 Accessing the Web Configurator ................................................................................................. 35 2.3 Navigating the Web Configurator ............................................................................................... 36 2.3.1 Title Bar ................................................................................................................................... 37 NWA / WAC Series Users Guide 5 Table of Contents 2.3.2 Navigation Panel .................................................................................................................. 40 2.3.3 Warning Messages ................................................................................................................ 43 2.3.4 Tables and Lists ...................................................................................................................... 43 Chapter 3 Setup Wizard.......................................................................................................................................47 3.1 Accessing the Wizard ..................................................................................................................... 47 3.2 Using the Wizard ............................................................................................................................. 47 3.2.1 Country Code ....................................................................................................................... 47 3.2.2 Time Zone ............................................................................................................................... 48 3.2.3 Uplink ...................................................................................................................................... 48 3.2.4 Radio ..................................................................................................................................... 49 3.2.5 SSID ........................................................................................................................................ 50 3.2.6 Summary ............................................................................................................................... 52 Part II: Technical Reference........................................................................... 53 Chapter 4 Dashboard..........................................................................................................................................54 4.1 Overview ......................................................................................................................................... 54 4.1.1 What You Can Do in this Chapter ....................................................................................... 54 4.2 Dashboard ...................................................................................................................................... 54 4.2.1 CPU Usage ............................................................................................................................. 58 4.2.2 Memory Usage ...................................................................................................................... 59 Chapter 5 Monitor................................................................................................................................................60 5.1 Overview ......................................................................................................................................... 60 5.1.1 What You Can Do in this Chapter ....................................................................................... 60 5.2 What You Need to Know ............................................................................................................... 60 5.3 Network Status ................................................................................................................................ 61 5.3.1 Port Statistics Graph .............................................................................................................. 63 5.4 Radio List ........................................................................................................................................ 64 5.4.1 AP Mode Radio Information ................................................................................................ 65 5.5 Station List ....................................................................................................................................... 67 5.6 WDS Link Info ................................................................................................................................... 68 5.7 Detected Device ........................................................................................................................... 69 5.8 View Log .......................................................................................................................................... 72 Chapter 6 Network...............................................................................................................................................75 NWA / WAC Series Users Guide 6 Table of Contents 6.1 Overview ......................................................................................................................................... 75 6.1.1 Management Mode ............................................................................................................. 75 6.1.2 What You Can Do in this Chapter ....................................................................................... 77 6.2 IP Setting ......................................................................................................................................... 78 6.3 VLAN ................................................................................................................................................ 79 6.4 AC (AP Controller) Discovery ........................................................................................................ 82 Chapter 7 Wireless ...............................................................................................................................................84 7.1 Overview ......................................................................................................................................... 84 7.1.1 What You Can Do in this Chapter ....................................................................................... 84 7.1.2 What You Need to Know ..................................................................................................... 85 7.2 AP Management ............................................................................................................................ 85 7.3 Rogue AP ......................................................................................................................................... 88 7.3.1 Add/Edit Rogue/Friendly List ................................................................................................ 90 7.4 Load Balancing .............................................................................................................................. 91 7.4.1 Disassociating and Delaying Connections ........................................................................ 93 7.5 DCS .................................................................................................................................................. 94 7.6 Technical Reference ...................................................................................................................... 94 Chapter 8 Bluetooth.............................................................................................................................................97 8.1 Overview ......................................................................................................................................... 97 8.1.1 What You Need To Know ..................................................................................................... 97 8.2 Bluetooth Advertising Settings ....................................................................................................... 97 8.2.1 Edit Advertising Settings ....................................................................................................... 98 Chapter 9 User....................................................................................................................................................100 9.1 Overview ....................................................................................................................................... 100 9.1.1 What You Can Do in this Chapter ..................................................................................... 100 9.1.2 What You Need To Know ................................................................................................... 100 9.2 User Summary ................................................................................................................................ 101 9.2.1 Add/Edit User ....................................................................................................................... 101 9.3 Setting ........................................................................................................................................... 103 9.3.1 Edit User Authentication Timeout Settings ........................................................................ 105 Chapter 10 AP Profile...........................................................................................................................................107 10.1 Overview ..................................................................................................................................... 107 10.1.1 What You Can Do in this Chapter ................................................................................... 107 10.1.2 What You Need To Know ................................................................................................. 107 10.2 Radio ............................................................................................................................................ 108 NWA / WAC Series Users Guide 7 Table of Contents 10.2.1 Add/Edit Radio Profile ...................................................................................................... 109 10.3 SSID .............................................................................................................................................. 114 10.3.1 SSID List ............................................................................................................................... 114 10.3.2 Add/Edit SSID Profile ......................................................................................................... 115 10.4 Security List .................................................................................................................................. 118 10.4.1 Add/Edit Security Profile ................................................................................................... 118 10.5 MAC Filter List .............................................................................................................................. 121 10.5.1 Add/Edit MAC Filter Profile ............................................................................................... 122 10.6 Layer-2 Isolation List .................................................................................................................... 123 10.6.1 Add/Edit Layer-2 Isolation Profile .................................................................................... 124 Chapter 11 MON Profile.......................................................................................................................................126 11.1 Overview ..................................................................................................................................... 126 11.1.1 What You Can Do in this Chapter ................................................................................... 126 11.2 MON Profile ................................................................................................................................. 126 11.2.1 Add/Edit MON Profile ....................................................................................................... 127 11.3 Technical Reference .................................................................................................................. 128 Chapter 12 WDS Profile........................................................................................................................................130 12.1 Overview ..................................................................................................................................... 130 12.1.1 What You Can Do in this Chapter ................................................................................... 130 12.2 WDS Profile ................................................................................................................................... 130 12.2.1 Add/Edit WDS Profile ........................................................................................................ 131 Chapter 13 Certificates .......................................................................................................................................132 13.1 Overview ..................................................................................................................................... 132 13.1.1 What You Can Do in this Chapter ................................................................................... 132 13.1.2 What You Need to Know ................................................................................................. 132 13.1.3 Verifying a Certificate ...................................................................................................... 134 13.2 My Certificates ........................................................................................................................... 135 13.2.1 Add My Certificates .......................................................................................................... 136 13.2.2 Edit My Certificates ........................................................................................................... 138 13.2.3 Import Certificates ........................................................................................................... 141 13.3 Trusted Certificates ..................................................................................................................... 142 13.3.1 Edit Trusted Certificates .................................................................................................... 143 13.3.2 Import Trusted Certificates ............................................................................................... 146 13.4 Technical Reference .................................................................................................................. 147 Chapter 14 System...............................................................................................................................................148 NWA / WAC Series Users Guide 8 Table of Contents 14.1 Overview ..................................................................................................................................... 148 14.1.1 What You Can Do in this Chapter ................................................................................... 148 14.2 Host Name ................................................................................................................................... 148 14.3 Date and Time ........................................................................................................................... 149 14.3.1 Pre-defined NTP Time Servers List ..................................................................................... 152 14.3.2 Time Server Synchronization ............................................................................................ 152 14.4 WWW Overview .......................................................................................................................... 153 14.4.1 Service Access Limitations ............................................................................................... 153 14.4.2 System Timeout .................................................................................................................. 153 14.4.3 HTTPS ................................................................................................................................... 154 14.4.4 Configuring WWW Service Control ................................................................................. 154 14.4.5 HTTPS Example ................................................................................................................... 155 14.5 SSH ............................................................................................................................................. 163 14.5.1 How SSH Works .................................................................................................................. 163 14.5.2 SSH Implementation on the NWA/WAC ......................................................................... 164 14.5.3 Requirements for Using SSH .............................................................................................. 165 14.5.4 Configuring SSH ................................................................................................................. 165 14.5.5 Examples of Secure Telnet Using SSH .............................................................................. 165 14.6 Telnet ........................................................................................................................................... 167 14.7 FTP ................................................................................................................................................ 167 14.8 SNMP ........................................................................................................................................... 168 14.8.1 Supported MIBs ................................................................................................................. 169 14.8.2 SNMP Traps ......................................................................................................................... 170 14.8.3 Configuring SNMP ............................................................................................................. 170 14.8.4 Adding or Editing an SNMPv3 User Profile ...................................................................... 171 Chapter 15 Log and Report.................................................................................................................................173 15.1 Overview ..................................................................................................................................... 173 15.1.1 What You Can Do In this Chapter .................................................................................. 173 15.2 Email Daily Report ....................................................................................................................... 173 15.3 Log Setting .................................................................................................................................. 175 15.3.1 Log Setting Screen ............................................................................................................ 176 15.3.2 Edit System Log Settings .................................................................................................. 177 15.3.3 Edit Remote Server ........................................................................................................... 181 15.3.4 Active Log Summary ....................................................................................................... 182 Chapter 16 File Manager ....................................................................................................................................185 16.1 Overview ..................................................................................................................................... 185 16.1.1 What You Can Do in this Chapter ................................................................................... 185 16.1.2 What you Need to Know .................................................................................................. 185 16.2 Configuration File ....................................................................................................................... 186 NWA / WAC Series Users Guide 9 Table of Contents 16.2.1 Example of Configuration File Download Using FTP ...................................................... 190 16.3 Firmware Package .................................................................................................................... 191 16.3.1 Example of Firmware Upload Using FTP .......................................................................... 192 16.4 Shell Script ................................................................................................................................... 193 Chapter 17 Diagnostics .......................................................................................................................................196 17.1 Overview ..................................................................................................................................... 196 17.1.1 What You Can Do in this Chapter ................................................................................... 196 17.2 Diagnostics .................................................................................................................................. 196 Chapter 18 LEDs ...................................................................................................................................................198 18.1 Overview ..................................................................................................................................... 198 18.1.1 What You Can Do in this Chapter ................................................................................... 198 18.2 Suppression Screen .................................................................................................................. 198 18.3 Locator Screen .......................................................................................................................... 199 Chapter 19 Antenna Switch ................................................................................................................................200 19.1 Overview ..................................................................................................................................... 200 19.1.1 What You Need To Know ................................................................................................. 200 19.2 Antenna Switch Screen ............................................................................................................. 200 Chapter 20 Reboot...............................................................................................................................................202 20.1 Overview ..................................................................................................................................... 202 20.1.1 What You Need To Know ................................................................................................. 202 20.2 Reboot ......................................................................................................................................... 202 Chapter 21 Shutdown ..........................................................................................................................................203 21.1 Overview ..................................................................................................................................... 203 21.1.1 What You Need To Know ................................................................................................. 203 21.2 Shutdown ..................................................................................................................................... 203 Chapter 22 Troubleshooting................................................................................................................................204 22.1 Overview ..................................................................................................................................... 204 22.2 Power, Hardware Connections, and LED ................................................................................ 204 22.3 NWA/WAC Access and Login ................................................................................................... 205 22.4 Internet Access ........................................................................................................................... 206 22.5 Wireless Connections ................................................................................................................. 207 NWA / WAC Series Users Guide 10 Table of Contents 22.6 Resetting the NWA/WAC ........................................................................................................... 212 22.7 Getting More Troubleshooting Help ......................................................................................... 213 Appendix A Importing Certificates ............................................................................................... 214 Appendix B IPv6............................................................................................................................... 227 Appendix C Customer Support ..................................................................................................... 235 Appendix D Legal Information ...................................................................................................... 241 Index .................................................................................................................................................254 NWA / WAC Series Users Guide 11 PART I Users Guide 12 CHAPTER 1 Introduction 1.1 Overview This Users Guide covers the following models: NWA1123-ACv2, NWA1123-AC PRO, NWA1123-AC HD, NWA5121-N, NWA5121-NI, NWA5123-AC, NWA5123-AC HD, NWA5123-NI, NWA5301-NJ, WAC5302D-S, WAC6103D-I, WAC6303D-S, WAC6502D-E, WAC6502D-S, WAC6503D-S, and WAC6553D-E. Your NWA/
WAC is a wireless AP (Access Point). It extends the range of your existing wired network without additional wiring, providing easy network access to mobile users. Table 1 NWA1123 Series Comparison Table FEATURES Supported Wireless Standards NWA1123-ACV2 IEEE 802.11a IEEE 802.11b IEEE 802.11g IEEE 802.11n IEEE 802.11ac 2.4 GHz 5 GHz None WEP WPA2 WPA2-MIX WPA2-PSK WPA2-PSK-MIX NWA1123-AC PRO NWA1123-AC HD IEEE 802.11a IEEE 802.11b IEEE 802.11g IEEE 802.11n IEEE 802.11ac IEEE 802.11a IEEE 802.11b IEEE 802.11g IEEE 802.11n IEEE 802.11ac 2.4 GHz 5 GHz None WEP WPA2 WPA2-MIX WPA2-PSK WPA2-PSK-MIX 2.4 GHz 5 GHz None WEP WPA2 WPA2-MIX WPA2-PSK WPA2-PSK-MIX Supported Frequency Bands Available Security Modes Number of SSID Profiles Number of Wireless Radios Monitor Mode &
Rogue APs Containment Rogue APs Detection WDS (Wireless Distribution System) -
Root AP & Repeater Modes Tunnel Forwarding Mode Layer-2 Isolation Power Detection External Antennas Internal Antennas Antenna Switch LED Locator 64 2 Yes Yes Yes No Yes No No Yes No No 64 2 Yes Yes Yes No Yes No No Yes Yes Yes 64 2 No Yes No No Yes No No Yes No Yes NWA / WAC Series Users Guide 13 Chapter 1 Introduction No NWA1123-ACV2 Table 1 NWA1123 Series Comparison Table FEATURES CAPWAP Managed AP Mode AC (AP Controller) Discovery 802.11r Fast Roaming Support in Managed AP Mode Bluetooth Low Energy
(BLE) Maximum number of log messages No No No NWA1123-AC PRO NWA1123-AC HD No No No No No No No No 512 event logs or 1024 debug logs Table 2 NWA5000 Series Comparison Table FEATURES Supported Wireless Standards Supported Frequency Bands Available Security Modes Number of SSID Profiles Number of Wireless Radios Monitor Mode &
Rogue APs Containment Rogue APs Detection WDS (Wireless Distribution System) -
Root AP & Repeater Modes Tunnel Forwarding Mode Layer-2 Isolation Power Detection External Antennas Internal Antennas Antenna Switch LED Locator CAPWAP Managed AP Mode NWA5121-N NWA5121-
NI NWA5123-
AC NWA5123-
AC HD NWA5123-
NI NWA5301-
NJ IEEE 802.11b IEEE 802.11g IEEE 802.11n IEEE 802.11b IEEE 802.11g IEEE 802.11n 2.4 GHz 2.4 GHz None WEP WPA2 WPA2-MIX WPA2-PSK WPA2-PSK-
MIX None WEP WPA2 WPA2-MIX WPA2-PSK WPA2-PSK-
MIX IEEE 802.11a IEEE 802.11b IEEE 802.11g IEEE 802.11n IEEE 802.11ac IEEE 802.11a IEEE 802.11b IEEE 802.11g IEEE 802.11n IEEE 802.11ac IEEE 802.11a IEEE 802.11b IEEE 802.11g IEEE 802.11n IEEE 802.11b IEEE 802.11g IEEE 802.11n 2.4 GHz 5 GHz None WEP WPA2 WPA2-MIX WPA2-PSK WPA2-PSK-
MIX 2.4 GHz 5 GHz None WEP WPA2 WPA2-MIX WPA2-PSK WPA2-PSK-
MIX 2.4 GHz 5 GHz None WEP WPA2 WPA2-MIX WPA2-PSK WPA2-PSK-
MIX 2.4 GHz None WEP WPA2 WPA2-MIX WPA2-PSK WPA2-PSK-
MIX 64 2 No Yes No No Yes No No Yes No Yes Yes 64 2 Yes Yes Yes No Yes No No Yes No No Yes 64 1 No Yes Yes No Yes No No Yes No No Yes 64 1 Yes Yes Yes No Yes No Yes No No No Yes 64 1 Yes Yes Yes No Yes No No Yes No No Yes 64 2 Yes Yes Yes No Yes No No Yes No No Yes NWA / WAC Series Users Guide 14 Chapter 1 Introduction Table 2 NWA5000 Series Comparison Table FEATURES AC (AP Controller) Discovery 802.11r Fast Roaming Support in Managed AP Mode Bluetooth Low Energy
(BLE) Maximum number of log messages NWA5121-N NWA5121-
NI NWA5123-
AC NWA5123-
AC HD NWA5123-
NI NWA5301-
NJ Yes Yes No Yes Yes No Yes Yes No Yes Yes No Yes Yes No Yes Yes No 256 event logs or 1 debug logs 256 event logs or 1 debug logs 512 event logs or 1024 debug logs 512 event logs or 1024 debug logs 256 event logs or 1 debug logs 256 event logs or 1 debug logs Table 3 WAC5000/6000 Series Comparison Table FEATURES Supported Wireless Standards WAC5302D-S WAC6103D-I WAC6303D-S IEEE 802.11a IEEE 802.11a IEEE 802.11b IEEE 802.11b IEEE 802.11g IEEE 802.11g IEEE 802.11n IEEE 802.11n IEEE 802.11ac IEEE 802.11ac IEEE 802.11a IEEE 802.11b IEEE 802.11g IEEE 802.11n IEEE 802.11ac Supported Frequency Bands Available Security Modes Number of SSID Profiles Number of Wireless Radios Monitor Mode & Rogue APs Containment Rogue APs Detection WDS (Wireless Distribution System) -
Root AP & Repeater Modes Tunnel Forwarding Mode Layer-2 Isolation Power Detection External Antennas Internal Antennas Antenna Switch LED Locator CAPWAP Managed AP Mode AC (AP Controller) Discovery 2.4 GHz 5 GHz None WEP WPA2 WPA2-MIX WPA2-PSK 2.4 GHz 5 GHz None WEP WPA2 WPA2-MIX WPA2-PSK 2.4 GHz 5 GHz None WEP WPA2 WPA2-MIX WPA2-PSK WPA2-PSK-MIX WPA2-PSK-MIX WPA2-PSK-MIX 64 2 No Yes No No Yes Yes No Yes No No Yes Yes 64 2 Yes Yes Yes Yes Yes No No Yes Yes Yes Yes Yes 64 2 No Yes Yes Yes Yes Yes No Yes No Yes Yes Yes NWA / WAC Series Users Guide 15 Chapter 1 Introduction WAC5302D-S WAC6103D-I WAC6303D-S Table 3 WAC5000/6000 Series Comparison Table FEATURES 802.11r Fast Roaming Support in Managed AP Mode Bluetooth Low Energy
(BLE) Maximum number of log messages 256 event logs or 1 debug logs Yes Yes No No 512 event logs or 1024 debug logs Yes Yes 512 event logs or 1024 debug logs Table 4 WAC6500 Series Comparison Table FEATURES Supported Wireless Standards WAC6502D-E WAC6502D-S WAC6503D-S WAC6553D-E IEEE 802.11a IEEE 802.11a IEEE 802.11b IEEE 802.11b IEEE 802.11g IEEE 802.11g IEEE 802.11n IEEE 802.11n IEEE 802.11ac IEEE 802.11ac IEEE 802.11a IEEE 802.11b IEEE 802.11g IEEE 802.11n IEEE 802.11ac IEEE 802.11a IEEE 802.11b IEEE 802.11g IEEE 802.11n IEEE 802.11ac Supported Frequency Bands Available Security Modes Number of SSID Profiles Number of Wireless Radios Monitor Mode & Rogue APs Containment Rogue APs Detection WDS (Wireless Distribution System) -
Root AP & Repeater Modes Tunnel Forwarding Mode Layer-2 Isolation Power Detection External Antennas Internal Antennas Antenna Switch LED Locator CAPWAP Managed AP Mode AC (AP Controller) Discovery 802.11r Fast Roaming Support in Managed AP Mode 2.4 GHz 5 GHz None WEP WPA2 WPA2-MIX WPA2-PSK 2.4 GHz 5 GHz None WEP WPA2 WPA2-MIX WPA2-PSK 2.4 GHz 5 GHz None WEP WPA2 WPA2-MIX WPA2-PSK 2.4 GHz 5 GHz None WEP WPA2 WPA2-MIX WPA2-PSK WPA2-PSK-MIX WPA2-PSK-MIX WPA2-PSK-MIX WPA2-PSK-MIX 64 2 Yes Yes Yes Yes Yes Yes Yes No No Yes Yes Yes Yes 64 2 Yes Yes Yes Yes Yes Yes Yes No No Yes Yes Yes Yes 64 2 Yes Yes Yes Yes Yes Yes No Yes No Yes Yes Yes Yes 64 2 Yes Yes Yes Yes Yes Yes No Yes No Yes Yes Yes Yes NWA / WAC Series Users Guide 16 Chapter 1 Introduction Table 4 WAC6500 Series Comparison Table FEATURES Bluetooth Low Energy
(BLE) Maximum number of log messages No WAC6502D-E WAC6502D-S WAC6503D-S WAC6553D-E No No No 512 event logs or 1024 debug logs You can set the NWA/WAC to operate in either standalone AP or managed AP mode. When the NWA/
WAC is in standalone AP mode, it can serve as a normal AP, as an RF monitor to search for rouge APs to help eliminate network threats (if it supports monitor mode and rogue APs detection/containment), or even as a root AP or a wireless repeater to establish wireless links with other APs in a WDS (Wireless Distribution System). A WDS is a wireless connection between two or more APs. Your NWA/WACs business-class reliability, SMB features, and centralized wireless management make it ideally suited for advanced service delivery in mission-critical networks. It uses Multiple BSSID and VLAN to provide simultaneous independent virtual APs. Additionally, innovations in roaming technology and QoS features eliminate voice call disruptions. The NWA/WAC controls network access with Media Access Control (MAC) address filtering, and rogue Access Point (AP) detection. It also provides a high level of network traffic security, supporting IEEE 802.1x, Wi-Fi Protected Access 2 and Wired Equivalent Privacy (WEP) data encryption. Your NWA/WAC is easy to install, configure and use. The embedded Web-based configurator enables simple, straightforward management and maintenance. See the Quick Start Guide for how to make hardware connections. 1.1.1 Management Mode The NWA/WAC is a unified AP and can work either in standalone AP mode or in managed AP mode. If the NWA/WAC and a Zyxel AP controller, such as the NXC2500 or NXC5500, are in the same subnet, it will be managed by the controller automatically. An AP controller uses Control And Provisioning of Wireless Access Points (CAPWAP, see RFC 5415) to discover and configure multiple managed APs. To set the NWA/WAC to be managed by an AP controller in a different subnet or change between management modes, use the AC (AP Controller) Discovery screen (see Section 6.4 on page 82). Table 5 NWA/WAC Management Mode Comparison MANAGEMENT MODE Standalone AP DEFAULT IP ADDRESS Dynamic or Static (192.168.1.2) UPLOAD FIRMWARE VIA Web Configurator or FTP Managed AP Dynamic CAPWAP or FTP When the NWA/WAC is in standalone AP mode and connects to a DHCP server, it uses the IP address assigned by the DHCP server. Otherwise, the NWA/WAC uses the default static management IP address
(192.168.1.2). You can use the AC Discovery screen to have the NWA/WAC work as a managed AP. When the NWA/WAC is in managed AP mode, it acts as a DHCP client and obtains an IP address from the AP controller. It can be configured ONLY by the AP controller. To change the NWA/WAC back to standalone AP mode, use the Reset button to restore the default configuration. Alternatively, you need to check the AP controller for the NWA/WACs IP address and use FTP to upload the default configuration file at conf/system-default.conf to the NWA/WAC and reboot the device. NWA / WAC Series Users Guide 17 Chapter 1 Introduction 1.1.2 MBSSID A Basic Service Set (BSS) is the set of devices forming a single wireless network (usually an access point and one or more wireless clients). The Service Set IDentifier (SSID) is the name of a BSS. In Multiple BSS
(MBSSID) mode, the NWA/WAC provides multiple virtual APs, each forming its own BSS and using its own individual SSID profile. You can configure multiple SSID profiles, and have all of them active at any one time. You can assign different wireless and security settings to each SSID profile. This allows you to compartmentalize groups of users, set varying access privileges, and prioritize network traffic to and from certain BSSs. To the wireless clients in the network, each SSID appears to be a different access point. As in any wireless network, clients can associate only with the SSIDs for which they have the correct security settings. For example, you might want to set up a wireless network in your office where Internet telephony (VoIP) users have priority. You also want a regular wireless network for standard users, as well as a guest wireless network for visitors. In the following figure, VoIP_SSID users have QoS priority, SSID01 is the wireless network for standard users, and Guest_SSID is the wireless network for guest users. In this example, the guest user is forbidden access to the wired Land Area Network (LAN) behind the AP and can access only the Internet. Figure 1 Multiple BSSs NWA / WAC Series Users Guide 18 Chapter 1 Introduction 1.1.3 Dual-Radio Some of the NWA/WAC models are equipped with dual wireless radios. This means you can configure two different wireless networks to operate simultaneously. Note: A different channel should be configured for each WLAN interface to reduce the effects of radio interference. You could use the 2.4 GHz band for regular Internet surfing and downloading while using the 5 GHz band for time sensitive traffic like high-definition video, music, and gaming. Figure 2 Dual-Radio Application 1.1.4 Root AP In Root AP mode, the NWA/WAC (Z) can act as the root AP in a wireless network and also allow repeaters (X and Y) to extend the range of its wireless network at the same time. In the figure below, both clients A, B and C can access the wired network through the root AP. NWA / WAC Series Users Guide 19 Chapter 1 Introduction Figure 3 Root AP Application On the NWA/WAC in Root AP mode, you can have multiple SSIDs active for regular wireless connections and one SSID for the connection with a repeater (repeater SSID). Wireless clients can use either SSID to associate with the NWA/WAC in Root AP mode. A repeater must use the repeater SSID to connect to the NWA/WAC in Root AP mode. When the NWA/WAC is in Root AP mode, repeater security between the NWA/WAC and other repeater is independent of the security between the wireless clients and the AP or repeater. When repeater security is enabled, both APs and repeaters must use the same pre-shared key. See Section 7.2 on page 85 and Section 12.2 on page 130 for more details. Unless specified, the term security settings refers to the traffic between the wireless clients and the AP. At the time of writing, repeater security is compatible with the NWA/WAC only. 1.1.5 Repeater The NWA/WAC can act as a wireless network repeater to extend a root APs wireless network range, and also establish wireless connections with wireless clients. Using Repeater mode, your NWA/WAC can extend the range of the WLAN. In the figure below, the NWA/WAC in Repeater mode (Z) has a wireless connection to the NWA/WAC in Root AP mode (X) which is connected to a wired network and also has a wireless connection to another NWA/WAC in Repeater mode (Y) at the same time. Z and Y act as repeaters that forward traffic between associated wireless clients and the wired LAN. Clients A and B access the AP and the wired network behind the AP through repeaters Z and Y. NWA / WAC Series Users Guide 20 Chapter 1 Introduction Figure 4 Repeater Application When the NWA/WAC is in Repeater mode, repeater security between the NWA/WAC and other repeater is independent of the security between the wireless clients and the AP or repeater. When repeater security is enabled, both APs and repeaters must use the same pre-shared key. See Section 7.2 on page 85 and Section 12.2 on page 130 for more details. Once the security settings of peer sides match one another, the connection between devices is made. At the time of writing, repeater security is compatible with the NWA/WAC only. 1.2 Ways to Manage the NWA/WAC You can use the following ways to manage the NWA/WAC. Web Configurator The Web Configurator allows easy NWA/WAC setup and management using an Internet browser. This Users Guide provides information about the Web Configurator. Command-Line Interface (CLI) The CLI allows you to use text-based commands to configure the NWA/WAC. You can access it using remote management (for example, SSH or Telnet). See the Command Reference Guide for more information. File Transfer Protocol (FTP) This protocol can be used for firmware upgrades and configuration backup and restore. NWA / WAC Series Users Guide 21 Chapter 1 Introduction Simple Network Management Protocol (SNMP) The NWA/WAC can be monitored by an SNMP manager. See the SNMP chapter in this Users Guide. 1.3 Good Habits for Managing the NWA/WAC Do the following things regularly to make the NWA/WAC more secure and to manage it more effectively. Change the password often. Use a password thats not easy to guess and that consists of different types of characters, such as numbers and letters. Write down the password and put it in a safe place. Back up the configuration (and make sure you know how to restore it). Restoring an earlier working configuration may be useful if the device becomes unstable or even crashes. If you forget your password, you will have to reset the NWA/WAC to its factory default settings. If you backed up an earlier configuration file, you wont have to totally re-configure the NWA/WAC; you can simply restore your last configuration. 1.4 Hardware Connections See your Quick Start Guide for information on making hardware connections. 1.5 NWA5301-NJ Hardware 1.5.1 110 Punch-Down Block This section shows you how to use a punch-down tool to seat an 8-wire Ethernet cable to the 110 punch-
down block. You can connect a PoE switch to the 110 punch-down block to provide power and Internet access to the NWA through this connection. An 8-pin Ethernet cable has four pairs of color coded wires. 1 Cut out one and a half inches of the jacket from the Ethernet cable to expose the wires. 2 Untwist the wire pairs no more than one inch. 3 Match each wire to the correct slot according to the color codes for wiring shown below. NWA / WAC Series Users Guide 22 Chapter 1 Introduction NWA Rear Panel PHONE PORT UPLINK PORT PIN#
Table 6 Color Codes for 110 Punch Down Block Wiring PIN#
1 2 3 4 5 6 7 8 WIRE COLOR White/Orange Orange White/Green Blue White/Blue Green White/Brown Brown 4 Use a punch-down tool to seat the wires down properly into the slot. 5 Trim any excess wires. Place the dust caps over the terminated wires. NWA / WAC Series Users Guide 23 Chapter 1 Introduction 1.5.2 Phone Port Connect a digital telephone to the RJ-45 PHONE port at the bottom of the NWA to forward voice traffic to/from the telephone switchboard that is connected to the RJ-45 PHONE port on the back of the NWA. The NWA does not support VoIP (Voice over Internet Protocol) and the PHONE port is NOT for making calls over the regular networking network (PSTN), either. 1.5.3 Console Port To use the CLI commands to configure the NWA, connect an RJ-45-to-DB-9 cable to the PHONE port at the bottom of the NWA. For local management, you can use a computer with terminal emulation software configured to the following parameters:
VT100 terminal emulation NWA / WAC Series Users Guide 24 Chapter 1 Introduction 115200 bps No parity, 8 data bits, 1 stop bit No flow control The following table shows you the wire color codes and pin assignment for the console cable. Table 7 RJ45-to-DB-9 Console Cable Color Codes RJ45 PIN#
DB-9 PIN#
1 1 2 7 2 3 5 8 WIRE COLOR Black Brown Blue Purple 1.6 LEDs The LEDs of your WAC6500 and NWA5301 can be controlled by using the Suppression feature such that the LEDs stay lit (ON) or OFF after the device is ready. The WAC6500 also features Locator LED which allows you to see the actual location of the WAC6500 between several devices in the network. Following are LED descriptions for the NWA/WAC series models. 1.6.1 WAC6502D-E, WAC6502D-S, and WAC6503D-S The LEDs will stay ON when the WAC6500 Series is ready. You can change this setting in the Maintenance
> LEDs > Suppression screen. NWA / WAC Series Users Guide 25 Chapter 1 Introduction Figure 5 WAC6500 Series LEDs The following table describes the LEDs. Table 8 WAC6500 Series LEDs LED PWR/SYS COLOR Red Green Red Green Red Green Red Green Red Green Red Green Management Green WLAN Green STATUS Slow Blinking (On for 1s, Off for 1s) On Off On On Off Fast Blinking (on for 50ms, Off for 50ms) Off Slow Blinking (blink for 3 times, Off for 3s) Off Slow Blinking (blink for 2 times, Off for 3s) Off On Slow Blinking (blink for 3 times, Off for 3s) Off On Off DESCRIPTION The WAC is booting up. The WAC is ready for use. There is system error and the WAC cannot boot up, or the WAC suffered a system failure. The WAC is doing firmware upgrade. The Uplink port is disconnected. The wireless module of the WAC is disabled or failed. The WAC AP is managed by a controller. The WAC AP is searching (discovery) for a controller. The WAC AP is in standalone mode. The 2.4 GHz WLAN is active. The 2.4 GHz WLAN is not active. NWA / WAC Series Users Guide 26 Chapter 1 Introduction Table 8 WAC6500 Series LEDs (continued) LED WLAN COLOR Green STATUS On Off UPLINK Amber/
Green On LAN Amber/
Green Locator White Blinking Off On Blinking Off Blinking Off DESCRIPTION The 5 GHz WLAN is active. The 5 GHz WLAN is not active. Amber - The port is operating as a 100-Mbps connection. Green - The port is operating as a Gigabit connection
(1000 Mbps). The WAC is sending/receiving data through the port. The port is not connected. Amber - The port is operating as a 100-Mbps connection. Green - The port is operating as a Gigabit connection
(1000 Mbps). The LAN port is sending/receiving data through the port. The LAN port is not connected. The Locator is activated and will show the actual location of the WAC between several devices in the network. The Locator function is off. 1.6.2 NWA1123-AC PRO and WAC6103D-I The LEDs will stay ON when the NWA1123-AC PRO or WAC6103D-I is ready. You can change this setting in the Maintenance > LEDs > Suppression screen. Figure 6 NWA1123-AC PRO and WAC6103D-I LEDs NWA / WAC Series Users Guide 27 Chapter 1 Introduction The following table describes the LEDs. Table 9 NWA1123-AC PRO and WAC6103D-I LEDs LED PWR/SYS COLOR Red Green Red Green Red Green Red Green Red Green Red Green Management Green WLAN Green Amber WLAN Green Amber UPLINK Amber/
Green LAN Amber/
Green STATUS Slow Blinking (On for 1s, Off for 1s) On Off On On Off Fast Blinking (on for 50ms, Off for 50ms) Off Slow Blinking (blink for 3 times, Off for 3s) Off Slow Blinking (blink for 2 times, Off for 3s) Off On Slow Blinking (blink for 3 times, Off for 3s) Off On On Off On On Off On Blinking Off On Blinking Off DESCRIPTION The NWA/WAC is booting up. The NWA/WAC is ready for use. There is system error and the NWA/WAC cannot boot up, or the NWA/WAC suffered a system failure. The NWA/WAC is doing firmware upgrade. The Uplink port is disconnected. The wireless module of the NWA/WAC is disabled or failed. The NWA/WAC is managed by a controller. The NWA/WAC is searching (discovery) for a controller. The NWA/WAC is in standalone mode. The antenna switch is set to Ceiling for the radio. The 2.4 GHz WLAN is active. The antenna switch is set to Wall for the radio. The 2.4 GHz WLAN is active. The 2.4 GHz WLAN is not active. The antenna switch is set to Ceiling for the radio. The 5 GHz WLAN is active. The antenna switch is set to Wall for the radio. The 5 GHz WLAN is active. The 5 GHz WLAN is not active. Amber - The port is operating as a 100-Mbps connection. Green - The port is operating as a Gigabit connection
(1000 Mbps). The NWA/WAC is sending/receiving data through the port. The port is not connected. Amber - The port is operating as a 100-Mbps connection. Green - The port is operating as a Gigabit connection
(1000 Mbps). The LAN port is sending/receiving data through the port. The LAN port is not connected. NWA / WAC Series Users Guide 28 Chapter 1 Introduction Table 9 NWA1123-AC PRO and WAC6103D-I LEDs (continued) LED Locator COLOR White STATUS Blinking DESCRIPTION The Locator is activated and will show the actual location of the NWA/WAC between several devices in the network. The Locator function is off. Off 1.6.3 NWA5301-NJ The LEDs automatically turn off when the NWA5301-NJ is ready. You can press the LED ON button for one second to turn on the LEDs again. The LEDs will blink and turn off after two minutes. Figure 7 NWA5301-NJ LEDs The following are the LED descriptions for your NWA5301-NJ. Table 10 NWA5301-NJ LEDs LABEL PWR/SYS COLOR Amber Green Amber Green Amber Green Amber Green Amber Green Amber Green Amber Green Green PoE STATUS Slow Blinking (On for 1s, Off for 1s) On Off On Slow Blinking (blink for 3 times, Off for 3s) On On Off Fast Blinking (On for 50ms times, Off for 50ms) Off Slow Blinking (blink for 3 times, Off for 3s) Off Slow Blinking (blink for 2 times, Off for 3s) Off On Off DESCRIPTION The NWA is booting up. The NWA is ready for use. The NWA is discovering an AP controller The NWA failed to boot up or is experiencing system failure. The NWA is undergoing firmware upgrade. The Uplink port is disconnected. The wireless module of the WAC is disabled or failed. Power is supplied to the yellow PoE Ethernet port (LAN1). There is no power supply. NWA / WAC Series Users Guide 29 Chapter 1 Introduction Table 10 NWA5301-NJ LEDs (continued) LABEL WLAN COLOR Green STATUS On Off DESCRIPTION The WLAN is active. The WLAN is not active. UPLINK Green LAN1-3 Green On Blinking Off On Blinking Off The port is connected. The NWA is sending/receiving data through the port. The port is not connected. The port is connected. The NWA is sending/receiving data through the port. The port is not connected. 1.6.4 NWA1123-ACv2, NWA5121-N, NWA5121-NI, NWA5123-AC and NWA5123-NI The following are the LED descriptions for your NWA1123/5120 series. Figure 8 NWA1123/5120 Series LED The following are the LED descriptions for your NWA1123/5120 series. Table 11 NWA1123/5120 Series LED COLOR Amber STATUS Slow Blinking (On for 1s, Off for 1s) On Green DESCRIPTION The NWA is booting up. NWA / WAC Series Users Guide 30 Chapter 1 Introduction Table 11 NWA1123/5120 Series LED (continued) COLOR Amber Green Amber Green Amber DESCRIPTION The NWA is ready for use. The NWAs wireless interface is activated. The NWA is discovering an AP controller. STATUS Off On Off On Slow Blinking (blink for 3 times, Off for 3s) On On Off Fast Blinking (On for 50ms, Off for 50ms) Off Slow Blinking (blink for 3 times, Off for 3s) Off Slow Blinking (blink for 2 times, Off for 3s) Off Green Amber Green Amber Green Amber Green Amber Green The NWA failed to boot up or is experience system failure. The NWA is undergoing firmware upgrade. The Uplink port is disconnected. The wireless LAN is disabled or fails. 1.6.5 WAC5302D-S The LEDs automatically turn off when the WAC5302D-S is ready. You can press the LED ON button for one second to turn on the LEDs again. The LEDs will blink and turn off after two minutes. Figure 9 WAC5302D-S LEDs NWA / WAC Series Users Guide 31 Chapter 1 Introduction The following table describes the LEDs. Table 12 WAC5302D-S LEDs LED PWR/SYS COLOR Red Green Red Green Red Green Red Green Red Green Red Green Management Green UPLINK Amber/
Green WLAN Green WLAN Green LAN Amber/
Green STATUS Slow Blinking (On for 1s, Off for 1s) On Off On On Off Fast Blinking (on for 50ms, Off for 50ms) Off Slow Blinking (blink for 3 times, Off for 3s) Off Slow Blinking (blink for 2 times, Off for 3s) Off On Slow Blinking (blink for 3 times, Off for 3s) Off On Blinking Off On Off On Off On Blinking Off DESCRIPTION The WAC is booting up. The WAC is ready for use. There is system error and the WAC cannot boot up, or the WAC suffered a system failure. The WAC is doing firmware upgrade. The Uplink port is disconnected. The wireless module of the WAC is disabled or failed. The WAC AP is managed by a controller. The WAC AP is searching (discovery) for a controller. The WAC AP is in standalone mode. Amber - The port is operating as a 10/100-Mbps connection. Green - The port is operating as a Gigabit connection
(1000 Mbps). The WAC is sending/receiving data through the port. The port is not connected. The 2.4 GHz WLAN is active. The 2.4 GHz WLAN is not active. The 5 GHz WLAN is active. The 5 GHz WLAN is not active. Amber - The port is operating as a 10/100-Mbps connection. Green - The port is operating as a Gigabit connection
(1000 Mbps). The LAN port is sending/receiving data through the port. The LAN port is not connected. 1.6.6 NWA1123-AC HD, NWA5123-AC HD and WAC6303D-S The following are the LED descriptions for your NWA/WAC. NWA / WAC Series Users Guide 32 Chapter 1 Introduction Figure 10 NWA1123-AC HD, NWA5123-AC HD and WAC6303D-S LED The following are the LED descriptions for your NWA/WAC. Table 13 NWA1123-AC HD, NWA5123-AC HD and WAC6303D-S LED COLOR Amber DESCRIPTION The NWA/WAC is booting up. STATUS Slow Blinking (On for 1s, Off for 1s) On Slow Blinking (blink for 3 times, Off for 3s) On On Green Amber Green Green Bright Blue On Red Red Red Green Blue On Fast Blinking (On for 50ms, Off for 50ms) Slow Blinking (blink for 3 times, Off for 3s) Slow Blinking (blink for 1 time, Off for 1s) Slow Blinking (blink for 1 time, Off for 1s) The NWA/WAC is discovering an AP controller. The NWA/WAC is ready for use, the NWA/WACs wireless interface is activated, and/or wireless clients are connected to the NWA/WAC. The NWA/WACs wireless interface is activated, but there are no wireless clients connected. The NWA/WAC failed to boot up or is experience system failure. The NWA/WAC is undergoing firmware upgrade. The Uplink port is disconnected. The wireless LAN is disabled or fails. The NWA/WAC is checking for an available 5GHz channel. 1.7 Starting and Stopping the NWA/WAC Here are some of the ways to start and stop the NWA/WAC. NWA / WAC Series Users Guide 33 Chapter 1 Introduction Always use Maintenance > Shutdown or the shutdown command before you turn off the NWA/WAC or remove the power. Not doing so can cause the firmware to become corrupt. Table 14 Starting and Stopping the NWA/WAC METHOD Turning on the power DESCRIPTION A cold start occurs when you turn on the power to the NWA/WAC. The NWA/WAC powers up, checks the hardware, and starts the system processes. A warm start (without powering down and powering up again) occurs when you use the Reboot button in the Reboot screen or when you use the reboot command. The NWA/
WAC writes all cached data to the local storage, stops the system processes, and then does a warm start. If you press the RESET button on the back of the NWA/WAC, the NWA/WAC sets the configuration to its default values and then reboots. See Section 22.6 on page 212 for more information. Clicking Maintenance > Shutdown > Shutdown or using the shutdown command writes all cached data to the local storage and stops the system processes. Wait for the device to shut down and then manually turn off or remove the power. It does not turn off the power. Power off occurs when you turn off the power to the NWA/WAC. The NWA/WAC simply turns off. It does not stop the system processes or write cached data to local storage. Rebooting the NWA/
WAC Using the RESET button Clicking Maintenance
> Shutdown >
Shutdown or using the shutdown command Disconnecting the power The NWA/WAC does not stop or start the system processes when you apply configuration files or run shell scripts although you may temporarily lose access to network resources. NWA / WAC Series Users Guide 34 CHAPTER 2 The Web Configurator 2.1 Overview The NWA/WAC Web Configurator allows easy management using an Internet browser. Browsers supported are:
Firefox 36.0.1 or later Chrome 41.0 or later IE 10 or later The recommended screen resolution is 1024 x 768 pixels and higher. 2.2 Accessing the Web Configurator 1 Make sure your NWA/WAC is working in standalone AP mode (see Section 1.1.1 on page 17) and hardware is properly connected. See the Quick Start Guide. 2 3 If the NWA/WAC and your computer are not connected to a DHCP server, make sure your computers IP address is in the range between "192.168.1.3" and "192.168.1.254". Browse to the NWA/WACs DHCP-assigned IP address or http://192.168.1.2. The Login screen appears. 4 Enter the user name (default: admin) and password (default: 1234). Click Login. NWA / WAC Series Users Guide 35 Chapter 2 The Web Configurator 5 If you logged in using the default user name and password, the Update Admin Info screen appears. Otherwise, the dashboard appears. The Update Admin Info screen appears every time you log in using the default user name and default password. If you change the password for the default user account, this screen does not appear anymore. 2.3 Navigating the Web Configurator The following summarizes how to navigate the web configurator from the Dashboard screen. This guide uses the NWA1123-ACv2 screens as an example. The screens may vary slightly for different models. NWA / WAC Series Users Guide 36 Chapter 2 The Web Configurator Figure 11 The Web Configurators Main Screen A B C The Web Configurators main screen is divided into these parts:
A - Title Bar B - Navigation Panel C - Main Window 2.3.1 Title Bar The title bar provides some useful links that always appear over the screens below, regardless of how deep into the Web Configurator you navigate. Figure 12 Title Bar The icons provide the following functions. Table 15 Title Bar: Web Configurator Icons LABEL Logout Wizard Help DESCRIPTION Click this to log out of the Web Configurator. Click this to open the wizard. See Chapter 3 on page 47 for more information. Click this to open the help page for the current screen. NWA / WAC Series Users Guide 37 Chapter 2 The Web Configurator Table 15 Title Bar: Web Configurator Icons (continued) LABEL About Site Map Object Reference CLI DESCRIPTION Click this to display basic information about the NWA/WAC. Click this to see an overview of links to the Web Configurator screens. Click this to open a screen where you can check which configuration items reference an object. Click this to open a popup window that displays the CLI commands sent by the Web Configurator. About Click About to display basic information about the NWA/WAC. Figure 13 About The following table describes labels that can appear in this screen. Table 16 About LABEL Boot Module Current Version Released Date OK Site Map DESCRIPTION This shows the version number of the software that handles the booting process of the NWA/
WAC. This shows the firmware version of the NWA/WAC. This shows the date (yyyy-mm-dd) and time (hh:mm:ss) when the firmware is released. Click this to close the screen. Click Site MAP to see an overview of links to the Web Configurator screens. Click a screens link to go to that screen. NWA / WAC Series Users Guide 38 Chapter 2 The Web Configurator Figure 14 Site Map Object Reference Click Object Reference to open the Object Reference screen. Select the type of object and the individual object and click Refresh to show which configuration settings reference the object. Figure 15 Object Reference The fields vary with the type of object. The following table describes labels that can appear in this screen. Table 17 Object References LABEL Object Name
#
Service DESCRIPTION This identifies the object for which the configuration settings that use it are displayed. Click the objects name to display the objects configuration screen in the main window. This field is a sequential value, and it is not associated with any entry. This is the type of setting that references the selected object. Click a services name to display the services configuration screen in the main window. NWA / WAC Series Users Guide 39 Chapter 2 The Web Configurator Table 17 Object References (continued) LABEL Priority DESCRIPTION If it is applicable, this field lists the referencing configuration items position in its list, otherwise N/A displays. This field identifies the configuration item that references the object. If the referencing configuration item has a description configured, it displays here. Click this to update the information in this screen. Click Cancel to close the screen. Name Description Refresh Cancel CLI Messages Click CLI to look at the CLI commands sent by the Web Configurator. These commands appear in a popup window, such as the following. Figure 16 CLI Messages Click Clear to remove the currently displayed information. Note: See the Command Reference Guide for information about the commands. 2.3.2 Navigation Panel Use the menu items on the navigation panel to open screens to configure NWA/WAC features. Click the arrow in the middle of the right edge of the navigation panel to hide the navigation panel menus or drag it to resize them. The following sections introduce the NWA/WACs navigation panel menus and their screens. NWA / WAC Series Users Guide 40 Chapter 2 The Web Configurator Figure 17 Navigation Panel Dashboard The dashboard displays general device information, system status, system resource usage, and interface status in widgets that you can re-arrange to suit your needs. For details on the Dashboards features, see Chapter 4 on page 54. Monitor Menu The monitor menu screens display status and statistics information. Table 18 Monitor Menu Screens Summary FOLDER OR LINK Network Status TAB Network Status FUNCTION Display general LAN interface information and packet statistics. Wireless AP Information Station Info WDS Link Info Detected Device Log Radio List Station List WDS Link Info Display statistics about the NWA/WACs WDS (Wireless Disctribution Display information about the radios of the connected APs. Display information about the connected stations. Detected Device View Log System) connections. Display information about suspected rogue APs. Display log entries for the NWA/WAC. Configuration Menu Use the configuration menu screens to configure the NWA/WACs features. Table 19 Configuration Menu Screens Summary FOLDER OR LINK Network TAB IP Setting VLAN AC Discovery FUNCTION Configure the IP address for the NWA/WAC Ethernet interface. Manage the Ethernet interface VLAN settings. Configures the NWA/WACs AP Controller settings. NWA / WAC Series Users Guide 41 Chapter 2 The Web Configurator TAB Table 19 Configuration Menu Screens Summary (continued) FOLDER OR LINK Wireless AP Management Rogue AP FUNCTION WLAN Setting Manage the NWA/WACs general wireless settings. Configure how the NWA/WAC monitors for rogue APs. Rogue/Friendly AP List Load Balancing Configure load balancing for traffic moving to and from wireless clients. Configure dynamic wireless channel selection. DCS Advertising Settings Configure the beacon ID(s) to be included in the Bluetooth advertising packet. Load Balancing DCS Bluetooth Object User AP Profile User Setting Radio SSID MON Profile MON Profile WDS Profile WDS Certificate My Certificates Trusted Certificates Create and manage users. Manage default settings for all users, general settings for user sessions, and rules to force user authentication. Create and manage wireless radio settings files that can be associated with different APs. Create and manage wireless SSID, security, MAC filtering, and layer-2 isolation files that can be associated with different APs. Create and manage rogue AP monitoring files that can be associated with different APs. Create and manage WDS profiles that can be used to connect to different APs in WDS. Create and manage th e NWA/WACs certificates. Import and manage certificates from trusted sources. System Host Name Date/Time WWW SSH TELNET FTP SNMP Log & Report Email Daily Report Log Setting Host Name Date/Time Service Control SSH TELNET FTP SNMP Configure the system and domain name for the NWA/WAC. Configure the current date, time, and time zone in the NWA/WAC. Configure HTTP, HTTPS, and general authentication. Configure SSH server and SSH service settings. Configure telnet server settings for the NWA/WAC. Configure FTP server settings. Configure SNMP communities and services. Email Daily Report Log Setting Configure where and how to send daily reports and what reports to send. Configure the system log, e-mail logs, and remote syslog servers. NWA / WAC Series Users Guide 42 Chapter 2 The Web Configurator Maintenance Menu Use the maintenance menu screens to manage configuration and firmware files, run diagnostics, and reboot or shut down the NWA/WAC. Table 20 Maintenance Menu Screens Summary FOLDER OR LINK File Manager TAB Configuration File Firmware Package Shell Script Diagnostics Suppression Locator Antenna Switch Reboot Shutdown FUNCTION Manage and upload configuration files for the NWA/WAC. View the current firmware version and to upload firmware. Manage and run shell script files for the NWA/WAC. Collect diagnostic information. Enable this feature to keep the LEDs off after the NWA/WAC starts. Enable this feature to see the actual location of the NWA/WAC between several devices in the network. Change antenna orientation for the radios. Restart the NWA/WAC. Turn off the NWA/WAC. Diagnostics LEDs Antenna Reboot Shutdown 2.3.3 Warning Messages Warning messages, such as those resulting from misconfiguration, display in a pop up window. Figure 18 Warning Message 2.3.4 Tables and Lists The Web Configurator tables and lists are quite flexible and provide several options for how to display their entries. 2.3.4.1 Manipulating Table Display Here are some of the ways you can manipulate the Web Configurator tables. NWA / WAC Series Users Guide 43 Chapter 2 The Web Configurator 1 Click a column heading to sort the tables entries according to that columns criteria. 2 Click the down arrow next to a column heading for more options about how to display the entries. The options available vary depending on the type of fields in the column. Here are some examples of what you can do:
Sort in ascending alphabetical order Sort in descending (reverse) alphabetical order Select which columns to display Group entries by field Show entries in groups Filter by mathematical operators (<, >, or =) or searching for text. 3 Select a column heading cells right border and drag to re-size the column. NWA / WAC Series Users Guide 44 Chapter 2 The Web Configurator 4 Select a column heading and drag and drop it to change the column order. A green check mark displays next to the columns title when you drag the column to a valid new location. 5 Use the icons and fields at the bottom of the table to navigate to different pages of entries and control how many entries display at a time. 2.3.4.2 Working with Table Entries The tables have icons for working with table entries. A sample is shown next. You can often use the [Shift]
or [Ctrl] key to select multiple entries to remove, activate, or deactivate. Table 21 Common Table Icons Here are descriptions for the most common table icons. Table 22 Common Table Icons LABEL Add Edit DESCRIPTION Click this to create a new entry. For features where the entrys position in the numbered list is important (features where the NWA/WAC applies the tables entries in order like the firewall for example), you can select an entry and click Add to create a new entry after the selected entry. Double-click an entry or select it and click Edit to open a screen where you can modify the entrys settings. In some tables you can just click a table entry and edit it directly in the table. For those types of tables small red triangles display for table entries with changes that you have not yet applied. NWA / WAC Series Users Guide 45 Chapter 2 The Web Configurator Table 22 Common Table Icons (continued) LABEL Remove DESCRIPTION To remove an entry, select it and click Remove. The NWA/WAC confirms you want to remove it before doing so. To turn on an entry, select it and click Activate. To turn off an entry, select it and click Inactivate. Select an entry and click Object Reference to open a screen that shows which settings use the entry. Activate Inactivate Object Reference NWA / WAC Series Users Guide 46 CHAPTER 3 Setup Wizard 3.1 Accessing the Wizard When you log into the Web Configurator for the first time or when you reset the NWA/WAC to its default configuration, the wizard screen displays. Note: If you have already configured the wizard screens and want to open it again, click the Wizard icon on the upper right corner of any Web Configurator screen. 3.2 Using the Wizard This wizard helps you configure the NWA/WAC IP address, change time zone, daylight saving and radio settings, and edit an SSID profile to change general wireless and wireless security settings. 3.2.1 Country Code The welcome screen displays. Select the country where the NWA/WAC is located and click Next. Note: You cannot change the country code if the NWA/WAC products comply with the U.S. laws, policies and regulations and are to be sold to the U.S. market. Figure 19 Wizard: Country Code NWA / WAC Series Users Guide 47 Chapter 3 Setup Wizard 3.2.2 Time Zone Use this screen to configure the NWA/WACs time zone and daylight saving time. Time Zone: Select the time zone of your location. This will set the time difference between your time zone and Greenwich Mean Time (GMT). Enable Daylight Saving: Select the option if you use Daylight Saving Time. Configure the day and time when Daylight Saving Time starts and ends. Offset allows you to specify how much the clock changes when daylight saving begins and ends. Enter a number from 1 to 5.5 (by 0.5 increments). Click Prev to return to the previous screen. Click Next to proceed. Click Cancel to close the wizard without saving. Figure 20 Wizard: Time Zone 3.2.3 Uplink Use this screen to configure the NWA/WACs IP address. Uplink Connection: Select Auto (DHCP) if the NWA/WAC is connected to a router with the DHCP server enabled. You then need to check the router for the IP address assigned to the NWA/WAC in order to access the NWA/WACs web configurator again. Otherwise, select Static IP when the NWA/WAC is NOT connected to a router or you want to assign it a fixed IP address. You will need to manually enter:
the NWA/WACs IP address and subnet mask. the IP address of the router that helps forward traffic. a DNS server's IP address. The Domain Name System (DNS) maps a domain name to an IP address and vice versa. The DNS server is extremely important because without it, you must know the IP address of a computer before you can access it. NWA / WAC Series Users Guide 48 Chapter 3 Setup Wizard Click Prev to return to the previous screen. Click Next to proceed. Click Cancel to close the wizard without saving. Figure 21 Wizard: Uplink 3.2.4 Radio Use this screen to configure the NWA/WACs radio transmitter(s). Channel Selection: Select Auto to have the NWA/WAC automatically choose a radio channel that has least interference. Otherwise, select Manual and specify a channel the NWA/WAC will use in the 2.4GHz or 5GHz wireless LAN. The options vary depending on the frequency band and the country you are in. Maximum Output Power: Enter the maximum output power of the NWA/WAC. If there is a high density of APs in an area, decrease the output power of the NWA/WAC to reduce interference with other APs. Note: Reducing the output power also reduces the NWA/WACs effective broadcast radius. Click Prev to return to the previous screen. Click Next to proceed. Click Cancel to close the wizard without saving. NWA / WAC Series Users Guide 49 Chapter 3 Setup Wizard Figure 22 Wizard: Radio 3.2.5 SSID Use this screen to enable, disable or edit an SSID profile. Select an SSID profile and click the Activate icon to turn it on or click the Inactivate icon to turn it off. To change an SSID profiles settings, such as the SSID (WiFi network name) and WiFi password, select the SSID profile from the list and click the Edit icon. See Section 3.2.5.1 on page 50 for more information. Note: You cannot add or remove an SSID profile after running the setup wizard. Figure 23 Wizard: SSID 3.2.5.1 Edit SSID Profile Use this screen to configure an SSID profile. NWA / WAC Series Users Guide 50 Chapter 3 Setup Wizard The screen varies depending on the security type you selected. SSID - Enter a descriptive name of up to 32 printable characters for the wireless LAN. VLAN ID: Enter a VLAN ID for the NWA/WAC to use to tag traffic originating from this SSID. Band Mode: Select the wireless band which this profile should use. 2.4 GHz is the frequency used by IEEE 802.11b/g/n wireless clients. 5 GHz is the frequency used by IEEE 802.11ac/a/n wireless clients. Not all NWA/WACs support both 2.4 GHz and 5 GHz frequency bands. Security Type: Select WPA2 to add security on this wireless network. Otherwise, select OPEN to allow any wireless client to associate this network without authentication. PSK (Pre-shared Key): If you set Security Type to wpa2 and select PSK, enter a pre-shared key of between 8 and 63 case-sensitive ASCII characters (including spaces and symbols) or 64 hexadecimal characters. 802.1x: Select 802.1x and the Primary / Secondary Radius Server check box to have the NWA/WAC use the specified RADIUS server. You have to enter the IP address, port number and shared secret password of the RADIUS server to be used for authentication. Click OK to proceed. Click Cancel to close the screen without saving. Figure 24 Wizard: SSID: Edit (WPA2) NWA / WAC Series Users Guide 51 Chapter 3 Setup Wizard Figure 25 Wizard: SSID: Edit (802.1x) 3.2.6 Summary Use this screen to check whether what you have configured is correct. Click Save to apply your settings and complete the wizard setup. Otherwise, click Prev to return to the previous screen or click Cancel to close the wizard without saving. Figure 26 Wizard: Summary NWA / WAC Series Users Guide 52
| 1 2 3 | User manual 2 | Users Manual | 4.89 MiB | May 12 2017 / April 06 2018 |
PART II Technical Reference 53 CHAPTER 4 Dashboard 4.1 Overview Use the Dashboard screens to check status information about the NWA/WAC. 4.1.1 What You Can Do in this Chapter The main Dashboard screen (Section 4.2 on page 54) displays the NWA/WACs general device information, system status, system resource usage, and interface status. You can also display other status screens for more information. 4.2 Dashboard This screen is the first thing you see when you log into the NWA/WAC. It also appears every time you click the Dashboard icon in the navigation panel. The Dashboard displays general device information, system status, system resource usage, and interface status in widgets that you can re-arrange to suit your needs. You can also collapse, refresh, and close individual widgets. NWA / WAC Series Users Guide 54 Chapter 4 Dashboard Figure 27 Dashboard A B C D The following table describes the labels in this screen. Table 23 Dashboard LABEL Widget Settings (A) Refresh Time Setting
(B) Refresh Now (C) Close Widget (D) Device Information System Name System Location Model Name Serial Number MAC Address Range Firmware Version Last Firmware Upgrade Status DESCRIPTION Use this link to re-open closed widgets. Widgets that are already open appear grayed out. Set the interval for refreshing the information displayed in the widget. Click this to update the widgets information immediately. Click this to close the widget. Use Widget Settings to re-open it. This field displays the name used to identify the NWA/WAC on any network. Click the icon to open the screen where you can change it. This field displays the location of the NWA/WAC. Click the icon to open the screen where you can change it. This field displays the model name of this NWA/WAC. This field displays the serial number of this NWA/WAC. This field displays the MAC addresses used by the NWA/WAC. Each physical port or wireless radio has one MAC address. The first MAC address is assigned to the Ethernet LAN port, the second MAC address is assigned to the first radio, and so on. This field displays the version number and date of the firmware the NWA/WAC is currently running. Click the icon to open the screen where you can upload firmware. This field displays whether the latest firmware update was successfully completed. NWA / WAC Series Users Guide 55 Chapter 4 Dashboard Table 23 Dashboard (continued) LABEL DESCRIPTION This field displays the date and time when the last firmware update was made. Last Firmware Upgrade System Resources CPU Usage Memory Usage Flash Usage Ethernet Neighbor Local Port
(Description) Model Name System Name FW Version Port (Description) IP MAC This field displays what percentage of the NWA/WACs processing capability is currently being used. Hover your cursor over this field to display the Show CPU Usage icon that takes you to a chart of the NWA/WACs recent CPU usage. This field displays what percentage of the NWA/WACs RAM is currently being used. Hover your cursor over this field to display the Show Memory Usage icon that takes you to a chart of the NWA/WACs recent memory usage. This field displays what percentage of the NWA/WACs onboard flash memory is currently being used. This field displays the port of the NWA/WAC, on which the neighboring device is discovered. This field displays the model name of the discovered device. This field displays the system name of the discovered device. This field displays the firmware version of the discovered device. This field displays the discovered devices port which is connected to the NWA/WAC. This field displays the IP address of the discovered device. Click the IP address to access and manage the discovered device using its web configurator. This field displays the MAC address of the discovered device. WDS (Wireless Distribution System) Uplink/Downlink Status MAC Address Radio Channel SSID Security Mode Link Status System Status System Uptime Current Date/
Time Current Login User This field displays the MAC address of the root AP or repeater to which the NWA/WAC is connected using WDS. This field displays the radio number on the root AP or repeater to which the NWA/WAC is connected using WDS. This field displays the channel number on the root AP or repeater to which the NWA/WAC is connected using WDS. This field displays the name of the wireless network to which the NWA/WAC is connected using WDS. This field displays which secure encryption methods is being used by the NWA/WAC to connect to the root AP or repeater using WDS. This field displays the RSSI (Received Signal Strength Indicator) and transmission/reception rate of the wireless connection in WDS. This field displays how long the NWA/WAC has been running since it last restarted or was turned on. This field displays the current date and time in the NWA/WAC. The format is yyyy-mm-dd hh:mm:ss. This field displays the user name used to log in to the current session, the amount of reauthentication time remaining, and the amount of lease time remaining. NWA / WAC Series Users Guide 56 Chapter 4 Dashboard Boot Status Table 23 Dashboard (continued) LABEL DESCRIPTION This field displays details about the NWA/WACs startup state. OK - The NWA/WAC started up successfully. Firmware update OK - A firmware update was successful. Problematic configuration after firmware update - The application of the configuration failed after a firmware upgrade. System default configuration - The NWA/WAC successfully applied the system default configuration. This occurs when the NWA/WAC starts for the first time or you intentionally reset the NWA/WAC to the system default settings. Fallback to lastgood configuration - The NWA/WAC was unable to apply the startup-
config.conf configuration file and fell back to the lastgood.conf configuration file. Fallback to system default configuration - The NWA/WAC was unable to apply the lastgood.conf configuration file and fell back to the system default configuration file
(system-default.conf). Booting in progress - The NWA/WAC is still applying the system configuration. This shows whether the NWA/WAC is set to work as a stand alone AP. Management Mode Power Mode This displays the NWA/WACs power status. Full - the NWA/WAC receives power using a power adaptor and/or through a PoE switch/
injector using IEEE 802.3at PoE plus. Limited - the NWA/WAC receives power through a PoE switch/injector using IEEE 802.3af PoE even when it is also connected to a power source using a power adaptor. When the NWA/WAC is in limited power mode, the NWA/WAC throughput decreases and has just one transmitting radio chain. It always shows Full if the NWA/WAC does not support power detection. At the time of writing, only the WAC6500 series APs support the power detection feature. If an Ethernet interface does not have any physical ports associated with it, its entry is displayed in light gray text. Click the Detail icon to go to a (more detailed) summary screen of interface statistics. This field displays the name of each interface. This field displays the current status of each interface. The possible values depend on what type of interface it is. Inactive - The Ethernet interface is disabled. Down - The Ethernet interface is enabled but not connected. Speed / Duplex - The Ethernet interface is enabled and connected. This field displays the port speed and duplex setting (Full or Half). This field displays the VLAN ID to which the interface belongs. This field displays the current IP address and subnet mask assigned to the interface. If the IP address is 0.0.0.0, the interface is disabled or did not receive an IP address and subnet mask via DHCP. This field displays how the interface gets its IP address. Static - This interface has a static IP address. DHCP Client - This interface gets its IP address from a DHCP server. If the interface has a static IP address, this shows n/a. If the interface has a dynamic IP address, use this field to get or to update the IP address for the interface. Click Renew to send a new DHCP request to a DHCP server. NWA / WAC Series Users Guide 57 Interface Status Summary Name Status VID IP Addr/Netmask IP Assignment Action Chapter 4 Dashboard Table 23 Dashboard (continued) LABEL DESCRIPTION This displays status information for the WLAN interface. WLAN Interface Status Summary Status MAC Address Radio Band OP Mode Channel Antenna This displays whether or not the WLAN interface is activated. This displays the MAC address of the radio. This indicates the radio number on the NWA/WAC. This indicates the wireless frequency band currently being used by the radio. This shows - when the radio is in monitor mode. This indicates the radios operating mode. Operating modes are AP (MBSSID), MON
(monitor), Root AP or Repeater. This indicates the channel number the radio is using. This indicates the antenna orientation for the radio (Wall or Ceiling). This field is not available if the NWA/WAC does not allow you to adjust antenna orientation for each radio using the web configurator or a physical switch. Refer to Table 1 on page 13 and Table 3 on page 15 to see if your NWA/WAC has an antenna switch. This displays the number of wireless clients connected to the NWA/WAC. This shows a summary of connected wireless Access Points (APs). This sections displays a summary of all wireless devices detected by the network. Click the link to go to the Monitor > Wireless > Detected Device screen. This displays the number of detected unclassified APs. This displays the number of detected rogue APs. This displays the number of detected friendly APs. Station AP Information All Sensed Device Un-Classified AP Rogue AP Friendly AP 4.2.1 CPU Usage Use this screen to look at a chart of the NWA/WACs recent CPU usage. To access this screen, click CPU Usage in the dashboard. Figure 28 Dashboard > CPU Usage NWA / WAC Series Users Guide 58 Chapter 4 Dashboard The following table describes the labels in this screen. Table 24 Dashboard > CPU Usage LABEL
%
time Refresh Interval Refresh Now DESCRIPTION The y-axis represents the percentage of CPU usage. The x-axis shows the time period over which the CPU usage occurred Enter how often you want this window to be automatically updated. Click this to update the information in the window right away. 4.2.2 Memory Usage Use this screen to look at a chart of the NWA/WACs recent memory (RAM) usage. To access this screen, click Memory Usage in the dashboard. Figure 29 Dashboard > Memory Usage The following table describes the labels in this screen. Table 25 Dashboard > Memory Usage LABEL
%
time Refresh Interval Refresh Now DESCRIPTION The y-axis represents the percentage of RAM usage. The x-axis shows the time period over which the RAM usage occurred Enter how often you want this window to be automatically updated. Click this to update the information in the window right away. NWA / WAC Series Users Guide 59 CHAPTER 5 Monitor 5.1 Overview Use the Monitor screens to check status and statistics information. 5.1.1 What You Can Do in this Chapter The Network Status screen (Section 5.3 on page 61) displays general LAN interface information and packet statistics. The AP Information > Radio List screen (Section 5.4 on page 64) displays statistics about the wireless radio transmitters in the NWA/WAC. The Station Info screen (Section 5.5 on page 67) displays statistics pertaining to the associated stations. The WDS Link Info screen (Section 5.6 on page 68) displays statistics about the NWA/WACs WDS
(Wireless Distribution System) connections. The Detected Device screen (Section 5.7 on page 69) displays information about suspected rogue APs. The View Log screen (Section 5.8 on page 72) displays the NWA/WACs current log messages. You can change the way the log is displayed, you can e-mail the log, and you can also clear the log in this screen. 5.2 What You Need to Know The following terms and concepts may help as you read through the chapter. Rogue AP Rogue APs are wireless access points operating in a networks coverage area that are not under the control of the networks administrators, and can open up holes in a networks security. See Chapter 11 on page 126 for details. Friendly AP Friendly APs are other wireless access points that are detected in your network, as well as any others that you know are not a threat (those from neighboring networks, for example). See Chapter 11 on page 126 for details. NWA / WAC Series Users Guide 60 Chapter 5 Monitor 5.3 Network Status Use this screen to look at general Ethernet interface information and packet statistics. To access this screen, click Monitor > Network Status. The screen varies depending on whether the NWA/WAC has an extra Ethernet port (except the uplink port). Figure 30 Monitor > Network Status (for NWA/WAC with one Ethernet port) Figure 31 Monitor > Network Status (for NWA/WAC with multiple Ethernet ports) NWA / WAC Series Users Guide 61 Chapter 5 Monitor The following table describes the labels in this screen. Table 26 Monitor > Network Status LABEL Interface Summary DESCRIPTION Use the Interface Summary section for IPv4 network settings. Use the IPv6 Interface Summary section for IPv6 network settings if you connect your NWA/WAC to an IPv6 network. Both sections have similar fields as described below. IPv6 Interface Summary Name Status VID IP Addr/Netmask IP Address IP Assignment Action Port Statistics Table Poll Interval Set Interval Stop Switch to Graphic View Name Status TxPkts RxPkts Tx Bcast Rx Bcast Collisions Tx This field displays the name of the physical Ethernet port on the NWA/WAC. This field displays the current status of each physical port on the NWA/WAC. Down - The port is not connected. Speed / Duplex - The port is connected. This field displays the port speed and duplex setting
(Full or Half). This field displays the VLAN ID to which the port belongs. This field displays the current IP address (and subnet mask) of the interface. If the IP address is 0.0.0.0 (in the IPv4 network) or :: (in the IPv6 network), the interface does not have an IP address yet. This field displays how the interface gets its IPv4 address. Static - This interface has a static IPv4 address. DHCP Client - This interface gets its IPv4 address from a DHCP server. Use this field to get or to update the IP address for the interface. Click Renew to send a new DHCP request to a DHCP server. If the interface cannot use one of these ways to get or to update its IP address, this field displays n/a. Enter how often you want this window to be updated automatically, and click Set Interval. Click this to set the Poll Interval the screen uses. Click this to stop the window from updating automatically. You can start it again by setting the Poll Interval and clicking Set Interval. Click this to display the port statistics as a line graph. This field displays the name of the interface. This field displays the current status of the physical port. Down - The physical port is not connected. Speed / Duplex - The physical port is connected. This field displays the port speed and duplex setting (Full or Half). This field displays the number of packets transmitted from the NWA/WAC on the physical port since it was last connected. This field displays the number of packets received by the NWA/WAC on the physical port since it was last connected. This field displays the number of broadcast packets transmitted from the NWA/WAC on the physical port since it was last connected. This field displays the number of broadcast packets received by the NWA/WAC on the physical port since it was last connected. This field displays the number of collisions on the physical port since it was last connected. This field displays the transmission speed, in bytes per second, on the physical port in the one-
second interval before the screen updated. NWA / WAC Series Users Guide 62 Chapter 5 Monitor Table 26 Monitor > Network Status (continued) LABEL Rx DESCRIPTION This field displays the reception speed, in bytes per second, on the physical port in the one-
second interval before the screen updated. This field displays how long the physical port has been connected. This field displays how long the NWA/WAC has been running since it last restarted or was turned on. Up Time System Up Time 5.3.1 Port Statistics Graph Use the port statistics graph to look at a line graph of packet statistics for the Ethernet port. To view, click Monitor > Network Status and then the Switch to Graphic View button. This screen is NOT available on the NWA/WAC that has an extra Ethernet port (except the uplink port). Figure 32 Monitor > Network Status > Switch to Graphic View The following table describes the labels in this screen. DESCRIPTION Enter how often you want this window to be automatically updated. Click this to update the information in the window right away. Click this to display the port statistics as a table. Table 27 Monitor > Network Status > Switch to Graphic View LABEL Refresh Interval Refresh Now Switch to Grid View Kbps/Mbps Time TX The y-axis represents the speed of transmission or reception. The x-axis shows the time period over which the transmission or reception occurred. This line represents traffic transmitted from the NWA/WAC on the physical port since it was last connected. NWA / WAC Series Users Guide 63 Chapter 5 Monitor Table 27 Monitor > Network Status > Switch to Graphic View (continued) LABEL RX DESCRIPTION This line represents the traffic received by the NWA/WAC on the physical port since it was last connected. This field displays the date and time the information in the window was last updated. Last Update 5.4 Radio List Use this screen to view statistics for the NWA/WACs wireless radio transmitters. To access this screen, click Monitor > Wireless > AP Information > Radio List. Figure 33 Monitor > Wireless > AP Information > Radio List (for NWA/WAC that supports WDS) Figure 34 Monitor > Wireless > AP Information > Radio List (for NWA/WAC that doesnt support WDS) The following table describes the labels in this screen. Table 28 Monitor > Wireless > AP Information > Radio List LABEL More Information Click this to view additional information about the selected radios wireless traffic and station DESCRIPTION Status count. Information spans a 24 hour period. This displays whether or not the radio is enabled. NWA / WAC Series Users Guide 64 Chapter 5 Monitor Table 28 Monitor > Wireless > AP Information > Radio List (continued) LABEL Loading DESCRIPTION This indicates the APs load balance status (UnderLoad or OverLoad) when load balancing is enabled on the NWA/WAC. Otherwise, it shows - when load balancing is disabled or the radio is in monitor mode. This displays the MAC address of the radio. This indicates the radio number on the NWA/WAC to which it belongs. This indicates the radios operating mode. Operating modes are AP (MBSSID), MONITOR, Root AP or Repeater This indicates the AP profile name and WDS profile name to which the radio belongs. This field is available only on the NWA/WAC that supports WDS. This indicates the AP profile name to which the radio belongs. This field is available only on the NWA/WAC that doesnt support WDS. This indicates the wireless frequency band currently being used by the radio. This shows - when the radio is in monitor mode. This indicates the radios channel ID. This displays the output power of the radio. This displays the number of wireless clients connected to this radio on the NWA/WAC. This displays the total number of packets received by the radio. This displays the total number of packets transmitted by the radio. MAC Address Radio OP Mode AP/WDS Profile Profile Frequency Band Channel Tx Power Station Rx Tx 5.4.1 AP Mode Radio Information This screen allows you to view a selected radios SSID details, wireless traffic statistics and station count for the preceding 24 hours. To access this window, select a radio and click the More Information button in the Radio List screen. NWA / WAC Series Users Guide 65 Chapter 5 Monitor Figure 35 Monitor > Wireless > AP Information > Radio List > More Information The following table describes the labels in this screen. Table 29 Monitor > Wireless > AP Information > Radio List > More Information LABEL SSID Detail DESCRIPTION This list shows information about all the wireless clients that have connected to the specified radio over the preceding 24 hours. This is the items sequential number in the list. It has no bearing on the actual data in this list.
#
NWA / WAC Series Users Guide 66 Chapter 5 Monitor Table 29 Monitor > Wireless > AP Information > Radio List > More Information (continued) LABEL DESCRIPTION This displays an SSID associated with this radio. There can be up to eight maximum. This displays a BSSID associated with this radio. The BSSID is tied to the SSID. This displays the security mode in which the SSID is operating. This displays the VLAN ID associated with the SSID. This graph displays the overall traffic information of the radio over the preceding 24 hours. This y-axis represents the amount of data moved across this radio in megabytes per second. This x-axis represents the amount of time over which the data moved across this radio. This graph displays the connected station information of the radio over the preceding 24 hours The y-axis represents the number of connected stations. The x-axis shows the time period over which a station was connected. This field displays the date and time the information in the window was last updated. Click this to close this window. Click this to close this window. SSID Name BSSID Security Mode VLAN Traffic Statistics Kbps/Mbps Time Station Count Stations Time Last Update OK Cancel 5.5 Station List Use this screen to view statistics pertaining to the associated stations (or wireless clients). Click Monitor
> Wireless > Station Info to access this screen. Figure 36 Monitor > Wireless > Station Info The following table describes the labels in this screen. Table 30 Monitor > Wireless > Station Info LABEL
#
IP Address MAC Address Radio Capability DESCRIPTION This is the stations index number in this list. This is the stations IP address. This is the stations MAC address. This is the radio number on the NWA/WAC to which the station is connected. This displays the supported standard currently being used by the station or the standards supported by the station. NWA / WAC Series Users Guide 67 Chapter 5 Monitor Table 30 Monitor > Wireless > Station Info (continued) LABEL SSID Name DESCRIPTION This indicates the name of the wireless network to which the station is connected. A single AP can have multiple SSIDs or networks. This indicates which secure encryption methods is being used by the station to connect to the network. This is the RSSI (Received Signal Strength Indicator) of the stations wireless connection. This is the maximum transmission rate of the station. This is the maximum reception rate of the station. This displays the time the station first associated with the NWA/WACs wireless network. Click this to refresh the items displayed on this page. Security Mode Signal Strength Tx Rate Rx Rate Association Time Refresh 5.6 WDS Link Info Use this screen to view the WDS traffic statistics between the NWA/WAC and a root AP or repeaters. Click Monitor > Wireless > WDS Link Info to access this screen. Figure 37 Monitor > Wireless > WDS Link Info The following table describes the labels in this screen. Table 31 Monitor > Wireless > WDS Link Info LABEL WDS Uplink Info DESCRIPTION Uplink refers to the WDS link from the repeaters to the root AP. Downlink refers to the WDS link from the root AP to the repeaters. WDS Downlink Info
#
When the NWA/WAC is in root AP mode and connected to a repeater, only the downlink information is displayed. When the NWA/WAC is in repeater mode and connected to a root AP directly or via another repeater, the uplink information is displayed. When the NWA/WAC is in repeater mode and connected to a root AP and other repeater(s), both the uplink and downlink information would be displayed. This is the index number of the root AP or repeater in this list. NWA / WAC Series Users Guide 68 Chapter 5 Monitor Table 31 Monitor > Wireless > WDS Link Info (continued) LABEL MAC Address DESCRIPTION This is the MAC address of the root AP or repeater to which the NWA/WAC is connected using WDS. This is the radio number on the root AP or repeater to which the NWA/WAC is connected using WDS. This indicates the name of the wireless network to which the NWA/WAC is connected using WDS. This indicates which secure encryption methods is being used by the NWA/WAC to connect to the root AP or repeater using WDS. This is the RSSI (Received Signal Strength Indicator) of the wireless connection in WDS. This is the maximum transmission rate of the root AP or repeater to which the NWA/WAC is connected using WDS. This is the maximum reception rate of the root AP or repeater to which the NWA/WAC is connected using WDS. This displays the time the NWA/WAC first associated with the wireless network using WDS. Click this to refresh the items displayed on this page. Radio SSID Name Security Mode Signal Strength Tx Rate Rx Rate Association Time Refresh 5.7 Detected Device Use this screen to view information about suspected rogue APs. Click Monitor > Wireless > Detected Device to access this screen. Not all NWA/WACs support monitor mode. Note: If the NWA/WAC supports monitor mode, the radio or at least one of the NWA/WACs radio must be set to monitor mode (in the Wireless > AP Management screen) in order to detect other wireless devices in its vicinity. If the NWA/WAC doesnt support monitor mode, turn on rogue AP detection in the Configuration > Wireless > Rogue AP screen to detect rogue APs. NWA / WAC Series Users Guide 69 Chapter 5 Monitor Figure 38 Monitor > Wireless > Detected Device (for NWA/WAC that supports Monitor mode) NWA / WAC Series Users Guide 70 Chapter 5 Monitor Figure 39 Monitor > Wireless > Detected Device (for NWA/WAC that doesnt support Monitor mode) The following table describes the labels in this screen. DESCRIPTION Table 32 Monitor > Wireless > Detected Device LABEL Discovered APs Rogue AP Suspected rogue AP Friendly AP Un-classified AP Detect Now Detected Device This shows how many devices are detected as rogue APs. This shows how many devices are detected as possible rogue APs by classification rule. This shows how many devices are detected as friendly APs. This shows how many devices are detected, but have not been classified by the NWA/WAC. Click this button for the NWA/WAC to scan for APs in the network. NWA / WAC Series Users Guide 71 Chapter 5 Monitor Table 32 Monitor > Wireless > Detected Device (continued) LABEL Mark as Rogue AP Mark as Friendly AP
#
Status Device Role Classified by MAC Address SSID Name Channel ID 802.11 Mode Security Description DESCRIPTION Click this button to mark the selected AP as a rogue AP. A rogue AP can be contained in the Configuration > Wireless > Rogue AP screen (Section 7.3 on page 88). Click this button to mark the selected AP as a friendly AP. For more on managing friendly APs, see the Configuration > Wireless > Rogue AP screen (Section 7.3 on page 88). This is the detected devices index number in this list. This indicates the detected devices status. This indicates the type of device detected. This indicates the detected devices role (such as friendly or rogue). This indicates the detected devices classification rule. This indicates the detected devices MAC address. This indicates the detected devices SSID. This indicates the detected devices channel ID. This indicates the 802.11 mode (a/b/g/n) transmitted by the detected device. This indicates the encryption method (if any) used by the detected device. This displays the detected devices description. For more on managing friendly and rogue APs, see the Configuration > Wireless > Rogue AP screen (Section 7.3 on page 88). This indicates the last time the device was detected by the NWA/WAC. Click this to refresh the items displayed on this page. Last Seen Refresh 5.8 View Log Log messages are stored in two separate logs, one for regular log messages and one for debugging messages. In the regular log, you can look at all the log messages by selecting All Logs, or you can select a specific category of log messages (for example, user). You can also look at the debugging log by selecting Debug Log. All debugging messages have the same priority. To access this screen, click Monitor > Log. The log is displayed in the following screen. Note: When a log reaches the maximum number of log messages, new log messages automatically overwrite existing log messages, starting with the oldest existing log message first. Events that generate an alert (as well as a log message) display in red. Regular logs display in black. Click a columns heading cell to sort the table entries by that columns criteria. Click the heading cell again to reverse the sort order. NWA / WAC Series Users Guide 72 Chapter 5 Monitor Figure 40 Monitor > Log > View Log The following table describes the labels in this screen. Table 33 Monitor > Log > View Log LABEL Show Filter / Hide Filter DESCRIPTION Click this button to show or hide the filter settings. If the filter settings are hidden, the Display, Email Log Now, Refresh, and Clear Log fields are available. If the filter settings are shown, the Display, Priority, Source Address, Destination Address, Source Interface, Destination Interface, Protocol, Keyword, and Search fields are available. Select the category of log message(s) you want to view. You can also view All Logs at one time, or you can view the Debug Log. This displays when you show the filter. Select the priority of log messages to display. The log displays the log messages with this priority or higher. Choices are: any, emerg, alert, crit, error, warn, notice, and info, from highest priority to lowest priority. This field is read-only if the Category is Debug Log. This displays when you show the filter. Type the source IP address of the incoming packet that generated the log message. Do not include the port in this filter. Display Priority Source Address NWA / WAC Series Users Guide 73 Chapter 5 Monitor Table 33 Monitor > Log > View Log (continued) LABEL Destination Address Source Interface DESCRIPTION This displays when you show the filter. Type the IP address of the destination of the incoming packet when the log message was generated. Do not include the port in this filter. This displays when you show the filter. Select the source interface of the packet that generated the log message. This displays when you show the filter. Select the destination interface of the packet that generated the log message. This displays when you show the filter. Select a service protocol whose log messages you would like to see. This displays when you show the filter. Type a keyword to look for in the Message, Source, Destination and Note fields. If a match is found in any field, the log message is displayed. You can use up to 63 alphanumeric characters and the underscore, as well as punctuation marks
() ,:;?! +-*/= #$% @ ; the period, double quotes, and brackets are not allowed. This displays when you show the filter. Click this button to update the log using the current filter settings. Click this button to send log messages to the Active e-mail addresses specified in the Send Log To field on the Configuration > Log & Report > Log Settings screen. Click this to update the list of logs. Click this button to clear the whole log, regardless of what is currently displayed on the screen. This field is a sequential value, and it is not associated with a specific log message. This field displays the time the log message was recorded. This field displays the priority of the log message. It has the same range of values as the Priority field above. This field displays the log that generated the log message. It is the same value used in the Display and (other) Category fields. This field displays the reason the log message was generated. The text [count=x], where x is a number, appears at the end of the Message field if log consolidation is turned on and multiple entries were aggregated to generate into this one. This field displays the source IP address and the port number in the event that generated the log message. This field displays the source interface of the packet that generated the log message. This field displays the destination IP address and the port number of the event that generated the log message. This field displays the destination interface of the packet that generated the log message. This field displays the service protocol in the event that generated the log message. This field displays any additional information about the log message. Destination Interface Protocol Keyword Search Email Log Now Refresh Clear Log
#
Time Priority Category Message Source Source Interface Destination Destination Interface Protocol Note The Web Configurator saves the filter settings if you leave the View Log screen and return to it later. NWA / WAC Series Users Guide 74 CHAPTER 6 Network 6.1 Overview This chapter describes how you can configure the management IP address and VLAN settings of your NWA/WAC. The Internet Protocol (IP) address identifies a device on a network. Every networking device (including computers, servers, routers, printers, etc.) needs an IP address to communicate across the network. These networking devices are also known as hosts. Figure 41 IP Setup The figure above illustrates one possible setup of your NWA/WAC. The gateway IP address is 192.168.1.1 and the managed IP address of the NWA/WAC is 192.168.1.2 (default), but if the NWA/WAC is assigned an IP address by a DHCP server, the default (192.168.1.2) will not be used. The gateway and the NWA/
WAC must belong in the same IP subnet to be able to communicate with each other. 6.1.1 Management Mode This discusses using the NWA/WAC in management mode, which determines whether the NWA/WAC is used in its standalone mode, or as part of a Control And Provisioning of Wireless Access Points (CAPWAP) network. About CAPWAP The NWA/WAC supports CAPWAP. This is Zyxels implementation of the CAPWAP protocol (RFC 5415). The CAPWAP data flow is protected by Datagram Transport Layer Security (DTLS). The following figure illustrates a CAPWAP wireless network. You (U) configure the AP controller (C), which then automatically updates the configurations of the managed APs (M1 ~ M4). NWA / WAC Series Users Guide 75 Chapter 6 Network Figure 42 CAPWAP Network Example Note: The NWA/WAC can be a standalone AP (default), or a CAPWAP managed AP. CAPWAP Discovery and Management The link between CAPWAP-enabled access points proceeds as follows:
1 An AP in managed AP mode joins a wired network (receives a dynamic IP address). 2 3 The AP sends out a discovery request, looking for a CAPWAP AP controller. If there is an AP controller on the network, it receives the discovery request. If the AP controller is in Manual mode it adds the details of the AP to its Unmanaged Access Points list, and you decide which available APs to manage. If the AP controller is in Always Accept mode, it automatically adds the AP to its Managed Access Points list and provides the managed AP with default configuration information, as well as securely transmitting the DTLS pre-shared key. The managed AP is ready for association with wireless clients. Managed AP Finds the Controller A managed NWA/WAC can find the controller in one of the following ways:
Manually specify the controllers IP address in the Web Configurators AC (AP Controller) Discovery screen. Get the controllers IP address from a DHCP server with the controllers IP address configured as option 138. Get the controllers IP address from a DNS server SRV (Service) record. NWA / WAC Series Users Guide 76 Chapter 6 Network Broadcasting to discover the controller within the broadcast domain. Note: The AP controller needs to have a static IP address. If it is a DHCP client, set the DHCP server to reserve an IP address for the AP controller. CAPWAP and IP Subnets By default, CAPWAP works only between devices with IP addresses in the same subnet. However, you can configure CAPWAP to operate between devices with IP addresses in different subnets by doing the following. Activate DHCP. Your networks DHCP server must support option 138 defined in RFC 5415. Configure DHCP option 138 with the IP address of the CAPWAP AP controller on your network. DHCP Option 138 allows the CAPWAP management request (from the AP in managed AP mode) to reach the AP controller in a different subnet, as shown in the following figure. Figure 43 CAPWAP and DHCP Option 138 Notes on CAPWAP This section lists some additional features of Zyxels implementation of the CAPWAP protocol. When the AP controller uses its internal Remote Authentication Dial In User Service (RADIUS) server, managed APs also use the AP controllers authentication server to authenticate wireless clients. If a managed APs link to the AP controller is broken, the managed AP continues to use the wireless settings with which it was last provided. 6.1.2 What You Can Do in this Chapter The IP Setting screen (Section 6.2 on page 78) configures the NWA/WACs LAN IP address. The VLAN screen (Section 6.3 on page 79) configures the NWA/WACs VLAN settings. The AC (AP Controller) Discovery screen (Section 6.3 on page 79) configures the NWA/WACs AP Controller settings. NWA / WAC Series Users Guide 77 Chapter 6 Network 6.2 IP Setting Use this screen to configure the IP address for your NWA/WAC. To access this screen, click Configuration
> Network > IP Setting. Figure 44 Configuration > Network > IP Setting Each field is described in the following table. Table 34 Configuration > Network > IP Setting LABEL IP Address Assignment DESCRIPTION Get Automatically Use Fixed IP Address IP Address Subnet Mask Gateway DNS Server IP Address Select this to make the interface a DHCP client and automatically get the IP address, subnet mask, and gateway address from a DHCP server. Select this if you want to specify the IP address, subnet mask, and gateway manually. Enter the IP address for this interface. Enter the subnet mask of this interface in dot decimal notation. The subnet mask indicates what part of the IP address is the same for all computers in the network. Enter the IP address of the gateway. The NWA/WAC sends packets to the gateway when it does not know how to route the packet to its destination. The gateway should be on the same network as the interface. Enter the IP address of the DNS server. NWA / WAC Series Users Guide 78 Chapter 6 Network Table 34 Configuration > Network > IP Setting (continued) LABEL IPv6 Address Assignment DESCRIPTION Enable Stateless Address Auto-
configuration
(SLAAC) Link-Local Address IPv6 Address/
Prefix Length Gateway Metric DHCPv6 Client DUID Request Address DHCPv6 Request Options DNS Server NTP Server Apply Reset Select this to enable IPv6 stateless auto-configuration on the NWA/WAC. The NWA/WAC will generate an IPv6 address itself from a prefix obtained from an IPv6 router in the network. This displays the IPv6 link-local address and the network prefix that the NWA/WAC generates itself for the LAN interface. Enter the IPv6 address and the prefix length for the LAN interface if you want to use a static IP address. This field is optional. The prefix length indicates what the left-most part of the IP address is the same for all computers in the network, that is, the network address. Enter the IPv6 address of the default outgoing gateway using colon (:) hexadecimal notation. Enter the priority of the gateway (if any) on the LAN interface. The NWA/WAC decides which gateway to use based on this priority. The lower the number, the higher the priority. If two or more gateways have the same priority, the NWA/WAC uses the one that was configured first. Enter zero to set the metric to 1024 for IPv6. Select this option to set the NWA/WAC to act as a DHCPv6 client. This field displays the DHCP Unique IDentifier (DUID) of the NWA/WAC, which is unique and used for identification purposes when the NWA/WAC is exchanging DHCPv6 messages with others. See Appendix B on page 227 for more information. Select this option to get an IPv6 address from the DHCPv6 server. Select this option to determine what additional information to get from the DHCPv6 server. Select this option to obtain the IP address of the DNS server. Select this option to obtain the IP address of the NTP server. Click Apply to save your changes back to the NWA/WAC. Click Reset to return the screen to its last-saved settings. 6.3 VLAN This section discusses how to configure the NWA/WACs VLAN settings. NWA / WAC Series Users Guide 79 Chapter 6 Network Figure 45 Management VLAN Setup In the figure above, to access and manage the NWA/WAC from computer A, the NWA/WAC and switch Bs ports to which computer A and the NWA/WAC are connected should be in the same VLAN. A Virtual Local Area Network (VLAN) allows a physical network to be partitioned into multiple logical networks. Devices on a logical network belong to one group. A device can belong to more than one group. With VLAN, a device cannot directly talk to or hear from devices that are not in the same group(s); the traffic must first go through a router. VLAN also increases network performance by limiting broadcasts to a smaller and more manageable logical broadcast domain. In traditional switched environments, all broadcast packets go to each and every individual port. With VLAN, all broadcasts are confined to a specific broadcast domain. IEEE 802.1Q Tag The IEEE 802.1Q standard defines an explicit VLAN tag in the MAC header to identify the VLAN membership of a frame across bridges. A VLAN tag includes the 12-bit VLAN ID and 3-bit user priority. The VLAN ID associates a frame with a specific VLAN and provides the information that devices need to process the frame across the network. Use this screen to configure the VLAN settings for your NWA/WAC. To access this screen, click Configuration > Network > VLAN. The screen varies depending on whether the NWA/WAC has an extra Ethernet port (except the uplink port). NWA / WAC Series Users Guide 80 Chapter 6 Network Figure 46 Configuration > Network > VLAN (for NWA/WAC with multiple Ethernet ports) Figure 47 Configuration > Network > VLAN (for NWA/WAC with one Ethernet port) Each field is described in the following table. Table 35 Configuration > Network > VLAN LABEL VLAN Settings DESCRIPTION Management VLAN ID As Native VLAN LAN Setting Port Setting Edit Activate/
Inactivate
#
Enter a VLAN ID for the NWA/WAC. Select this option to treat this VLAN ID as a VLAN created on the NWA/WAC and not one assigned to it from outside the network. Double-click an entry or select it and click Edit to open a screen where you can modify the entrys settings. In some tables you can just click a table entry and edit it directly in the table. For those types of tables small red triangles display for table entries with changes that you have not yet applied. To turn on an entry, select it and click Activate. To turn off an entry, select it and click Inactivate. This is the index number of the port. NWA / WAC Series Users Guide 81 Chapter 6 Network Table 35 Configuration > Network > VLAN (continued) LABEL DESCRIPTION This field indicates whether the port is enabled (a yellow bulb) or not (a gray bulb). This field displays the name of the port. This field displays the port number of the VLAN ID. Status Port PVID VLAN Configuration Add Edit Remove Activate/
Inactivate
#
Status Name VID Member Apply Reset Click this to create a new entry. For features where the entrys position in the numbered list is important (features where the NWA/WAC applies the tables entries in order like the SSID for example), you can select an entry and click Add to create a new entry after the selected entry. Double-click an entry or select it and click Edit to open a screen where you can modify the entrys settings. In some tables you can just click a table entry and edit it directly in the table. For those types of tables small red triangles display for table entries with changes that you have not yet applied. To remove an entry, select it and click Remove. The NWA/WAC confirms you want to remove it before doing so. To turn on an entry, select it and click Activate. To turn off an entry, select it and click Inactivate. This is the index number of the VLAN ID This field indicates whether the VLAN is enabled (a yellow bulb) or not (a gray bulb). This field displays the name of each VLAN. This field displays the VLAN ID. This field displays the VLAN membership to which the port belongs. Click Apply to save your changes back to the NWA/WAC. Click Reset to return the screen to its last-saved settings. 6.4 AC (AP Controller) Discovery This section discusses how to configure the NWA/WACs AC (AP Controller) Discovery settings. You can have the NWA/WAC managed by an AP controller on your network. When you do this, the NWA/WAC can be configured ONLY by the AP controller. See Section 6.1.1 on page 75 for more information on management mode and AP Controller. Note: The AC (AP Controller) Discovery settings are not available in all NWA/WACs. See Section 1.1 on page 13 for more information. If you want to return the NWA/WAC to standalone AP mode, you can do one of the two following options:
Press the Reset button. Check the AP controller for the NWA/WACs IP address and use FTP to upload the default configuration file to the NWA/WAC. You can get the configuration file at conf/system-default.conf. You must reboot the device after uploading the configuration file. To access the Controller Discover screen, click Configuration > Network > AC Discovery. NWA / WAC Series Users Guide 82 Chapter 6 Network Figure 48 Configuration > Network > AC Discovery Each field is described in the following table. Table 36 Configuration > Network > AC Discovery LABEL Discovery Setting Auto DESCRIPTION Manual Primary / Secondary Static AC IP Disable Apply Reset Select this option to use DHCP option 138/DNS SRV record/Broadcast to get the AP controllers IP address. If the NWA/WAC and a Zyxel AP controller, such as the NXC2500 or NXC5500, are in the same subnet, it will be managed by the controller automatically. Select this option and enter the IP address of the AP controller manually. This is necessary when the AP Controller is not in the same subnet and you want it to manage the NWA/WAC. Specify the primary and secondary IP address of the AP controller to which the NWA/
WAC connects. Select this to manage the NWA/WAC using its own web configurator, neither managing nor managed by other devices. Please note if an AP Controller is in the same subnet, you will need to click Disable if you do not want the NWA/WAC to be managed. Click Apply to save the information entered in this screen. If you select Auto or Manual, the AP controller uploads the firmware package for managed AP mode to the NWA/WAC and you cannot log in as the web configurator is disabled; you must manage the NWA/WAC through the AP controller on your network. Click Reset to return the screen to its last-saved settings. NWA / WAC Series Users Guide 83 CHAPTER 7 Wireless 7.1 Overview This chapter discusses how to configure the wireless network settings in your NWA/WAC. The following figure provides an example of a wireless network. Figure 49 Example of a Wireless Network The wireless network is the part in the blue circle. In this wireless network, devices A and B are called wireless clients. The wireless clients use the access point (AP) to interact with other devices (such as the printer) or with the Internet. Your NWA/WAC is the AP. 7.1.1 What You Can Do in this Chapter The AP Management screen (Section 7.2 on page 85) manages the NWA/WACs general wireless settings. The Rogue AP screen (Section 7.3 on page 88) allows you to assign APs either to the rogue AP list or the friendly AP list. The Load Balancing screen (Section 7.4 on page 91) configures network traffic load balancing between the APs and the NWA/WAC. The DCS screen (Section 7.5 on page 94) configures dynamic radio channel selection. NWA / WAC Series Users Guide 84 Chapter 7 Wireless 7.1.2 What You Need to Know The following terms and concepts may help as you read this chapter. Station / Wireless Client A station or wireless client is any wireless-capable device that can connect to an AP using a wireless signal. Dynamic Channel Selection (DCS) Dynamic Channel Selection (DCS) is a feature that allows an AP to automatically select the radio channel upon which it broadcasts by scanning the area around it and determining what channels are currently being used by other devices. Load Balancing (Wireless) Wireless load balancing is the process where you limit the number of connections allowed on an wireless access point (AP) or you limit the amount of wireless traffic transmitted and received on it so the AP does not become overloaded. 7.2 AP Management Use this screen to manage the NWA/WACs general wireless settings. Click Configuration > Wireless > AP Management to access this screen. NWA / WAC Series Users Guide 85 Chapter 7 Wireless Figure 50 Configuration > Wireless > AP Management Each field is described in the following table. Table 37 Configuration > Wireless > AP Management LABEL Radio 1 Setting Radio 1 Activate DESCRIPTION Select the check box to enable the NWA/WACs first (default) radio. NWA / WAC Series Users Guide 86 Chapter 7 Wireless Table 37 Configuration > Wireless > AP Management (continued) LABEL Radio 1 OP Mode DESCRIPTION Select the operating mode for radio 1. AP Mode means the radio can receive connections from wireless clients and pass their data traffic through to the NWA/WAC to be managed (or subsequently passed on to an upstream gateway for managing). MON Mode means the radio monitors the broadcast area for other APs, then passes their information on to the NWA/WAC where it can be determined if those APs are friendly or rogue. If a radio is set to this mode it cannot receive connections from wireless clients. Root AP means the radio acts as an AP and also supports the wireless connections with other APs (in repeater mode) to form a WDS (Wireless Distribution System) to extend its wireless network. Repeater means the radio can establish a wireless connection with other APs (in either root AP or repeater mode) to form a WDS. Select the radio profile the radio uses. Radio 1 Profile Note: You can only apply a 2.4G AP radio profile to radio 1. Otherwise, the first radio will not be working. Radio 1 WDS Profile This field is available only when the radio is in Root AP or Repeater mode. Uplink Selection Mode Max Output Power MBSSID Settings Edit
#
SSID Profile Radio 2 Setting Radio 2 Activate Select the WDS profile the radio uses to connect to a root AP or repeater. This field is available only when the radio is in Repeater mode. Select AUTO to have the NWA/WAC automatically use the settings in the applied WDS profile to connect to a root AP or repeater. Select Manual to have the NWA/WAC connect to the root AP or repeater with the MAC address specified in the Radio 1 Uplink MAC Address field. Enter the maximum output power (between 0 to 30 dBm) of the NWA/WAC in this field. If there is a high density of APs in an area, decrease the output power of the NWA/WAC to reduce interference with other APs. Note: Reducing the output power also reduces the NWA/WACs effective broadcast radius. Double-click an entry or select it and click Edit to open a screen where you can modify the entrys settings. In some tables you can just click a table entry and edit it directly in the table. For those types of tables small red triangles display for table entries with changes that you have not yet applied. This field shows the index number of the SSID This field displays the SSID profile that is associated with the radio profile. This displays if the NWA/WAC has a second radio. Select the check box to enable the NWA/WACs second radio. NWA / WAC Series Users Guide 87 Chapter 7 Wireless Table 37 Configuration > Wireless > AP Management (continued) LABEL Radio 2 OP Mode DESCRIPTION This displays if the NWA/WAC has a second radio. Select the operating mode for radio 2. AP Mode means the radio can receive connections from wireless clients and pass their data traffic through to the NWA/WAC to be managed (or subsequently passed on to an upstream gateway for managing). MON Mode means the radio monitors the broadcast area for other APs, then passes their information on to the NWA/WAC where it can be determined if those APs are friendly or rogue. If a radio is set to this mode it cannot receive connections from wireless clients. Root AP means the radio acts as an AP and also supports the wireless connections with other APs (in repeater mode) to form a WDS to extend its wireless network. Repeater means the radio can establish a wireless connection with other APs (in either root AP or repeater mode) to form a WDS. This displays if the NWA/WAC has a second radio. Select the radio profile the radio uses. Radio 2 Profile Note: You can only apply a 5G AP radio profile to radio 2. Otherwise, the second radio will not be working. Radio 2 WDS Profile This field is available only when the radio is in Root AP or Repeater mode. Uplink Selection Mode Max Output Power MBSSID Settings Edit
#
SSID Profile Apply Reset Select the WDS profile the radio uses to connect to a root AP or repeater. This field is available only when the radio is in Repeater mode. Select AUTO to have the NWA/WAC automatically use the settings in the applied WDS profile to connect to a root AP or repeater. Select Manual to have the NWA/WAC connect to the root AP or repeater with tbe MAC address specified in the Radio 2 Uplink MAC Address field. Enter the maximum output power (between 0 to 30 dBm) of the NWA/WAC in this field. If there is a high density of APs in an area, decrease the output power of the NWA/WAC to reduce interference with other APs. Note: Reducing the output power also reduces the NWA/WACs effective broadcast radius. Double-click an entry or select it and click Edit to open a screen where you can modify the entrys settings. In some tables you can just click a table entry and edit it directly in the table. For those types of tables small red triangles display for table entries with changes that you have not yet applied. This field shows the index number of the SSID This field shows the SSID profile that is associated with the radio profile. Click Apply to save your changes back to the NWA/WAC. Click Reset to return the screen to its last-saved settings. 7.3 Rogue AP Use this screen to assign APs either to the rogue AP list or the friendly AP list. A rogue AP is a wireless access point operating in a networks coverage area that is not under the control of the network administrator, and which can potentially open up holes in a networks security. Click Configuration > Wireless > Rogue AP to access this screen. NWA / WAC Series Users Guide 88 Chapter 7 Wireless Figure 51 Configuration > Wireless > Rogue AP (for NWA/WAC that supports Monitor mode) Figure 52 Configuration > Wireless > Rogue AP (for NWA/WAC that doesnt support Monitor mode) NWA / WAC Series Users Guide 89 Chapter 7 Wireless Each field is described in the following table. DESCRIPTION Table 38 Configuration > Wireless > Rogue AP LABEL Rogue AP Detection Setting Enable Rogue AP Detection Suspected Rogue AP Classification Rule Select this option to detect Rogue APs in the network. Click the check boxes (Weak Security (Open, WEP, WPA-PSK), Hidden SSID, SSID Keyword) of the characteristics an AP should have for the NWA/WAC to rule it as a Rogue AP. Click this to add an SSID Keyword. Select an SSID Keyword and click this button to modify it. Select an existing SSID keyword and click this button to delete it. This is the SSID Keywords index number in this list. This field displays the SSID Keyword. Click this button to add an AP to the list and assign it either friendly or rogue status. Select an AP in the list to edit and reassign its status. Select an AP in the list to remove. This field is a sequential value, and it is not associated with any interface. This field indicates whether the selected AP is a rogue-ap or a friendly-ap. To change the APs role, click the Edit button. This field indicates the APs radio MAC address. This field displays the APs description. You can modify this by clicking the Edit button. These controls allow you to export the current list of rogue and friendly APs or import existing lists. Enter the file name and path of the list you want to import or click the Browse button to locate it. Once the File Path field has been populated, click Importing to bring the list into the NWA/WAC. Add Edit Remove
#
SSID Keyword Rogue/Friendly AP List Add Edit Remove
#
Role MAC Address Description Rogue/Friendly AP List Importing/Exporting File Path / Browse /
Importing Exporting Apply Reset You need to wait a while for the importing process to finish. Click this button to export the current list of either rogue APs or friendly APS. Click Apply to save your changes back to the NWA/WAC. Click Reset to return the screen to its last-saved settings. 7.3.1 Add/Edit Rogue/Friendly List Click Add or select an AP and click the Edit button in the Configuration > Wireless > Rogue AP table to display this screen. NWA / WAC Series Users Guide 90 Chapter 7 Wireless Figure 53 Configuration > Wireless > Rogue AP > Add/Edit Rogue/Friendly AP List Each field is described in the following table. Table 39 Configuration > Wireless > Rogue AP > Add/Edit Rogue/Friendly AP List LABEL MAC DESCRIPTION Enter the MAC address of the AP you want to add to the list. A MAC address is a unique hardware identifier in the following hexadecimal format: xx:xx:xx:xx:xx:xx where xx is a hexadecimal number separated by colons. Enter up to 60 characters for the APs description. Spaces and underscores are allowed. Select either Rogue AP or Friendly AP for the APs role. Click OK to save your changes back to the NWA/WAC. Click Cancel to close the window with changes unsaved. Description Role OK Cancel 7.4 Load Balancing Use this screen to configure wireless network traffic load balancing between the APs on your network. Click Configuration > Wireless > Load Balancing to access this screen. Figure 54 Configuration > Wireless > Load Balancing NWA / WAC Series Users Guide 91 Chapter 7 Wireless Each field is described in the following table. Table 40 Configuration > Wireless > Load Balancing LABEL Enable Load Balancing DESCRIPTION Select this to enable load balancing on the NWA/WAC. Mode Max Station Number Traffic Level Disassociate station when overloaded Use this section to configure wireless network traffic load balancing between the managed APs in this group. Select a mode by which load balancing is carried out. Select By Station Number to balance network traffic based on the number of specified stations connected to the NWA/WAC. Select By Traffic Level to balance network traffic based on the volume generated by the stations connected to the NWA/WAC. Select By Smart Classroom to balance network traffic based on the number of specified stations connected to the NWA/WAC. The NWA/WAC ignores association request and authentication request packets from any new station when the maximum number of stations is reached. If you select By Station Number or By Traffic Level, once the threshold is crossed (either the maximum station numbers or with network traffic), the NWA/WAC delays association request and authentication request packets from any new station that attempts to make a connection. This allows the station to automatically attempt to connect to another, less burdened AP if one is available. Enter the threshold number of stations at which the NWA/WAC begins load balancing its connections. Select the threshold traffic level at which the NWA/WAC begins load balancing its connections (Low, Medium, High). The maximum bandwidth allowed for each level is:
Low - 11 Mbps, Medium - 23 Mbps High - 35M bps This function is enabled by default and the disassociation priority is always Signal Strength when you set Mode to By Smart Classroom. Select this option to disassociate wireless clients connected to the AP when it becomes overloaded. If you do not enable this option, then the AP simply delays the connection until it can afford the bandwidth it requires, or it transfers the connection to another AP within its broadcast radius. The disassociation priority is determined automatically by the NWA/WAC and is as follows:
Idle Timeout - Devices that have been idle the longest will be kicked first. If none of the connected devices are idle, then the priority shifts to Signal Strength. Signal Strength - Devices with the weakest signal strength will be kicked first. Note: If you enable this function, you should ensure that there are multiple APs within the broadcast radius that can accept any rejected or kicked wireless clients; otherwise, a wireless client attempting to connect to an overloaded AP will be disassociated permanently and never be allowed to connect. Apply Reset Click Apply to save your changes back to the NWA/WAC. Click Reset to return the screen to its last-saved settings. NWA / WAC Series Users Guide 92 Chapter 7 Wireless 7.4.1 Disassociating and Delaying Connections When your AP becomes overloaded, there are two basic responses it can take. The first one is to delay a client connection. This means that the AP withholds the connection until the data transfer throughput is lowered or the client connection is picked up by another AP. If the client is picked up by another AP then the original AP cannot resume the connection. For example, here the AP has a balanced bandwidth allotment of 6 Mbps. If laptop R connects and it pushes the AP over its allotment, say to 7 Mbps, then the AP delays the red laptops connection until it can afford the bandwidth or the laptop is picked up by a different AP with bandwidth to spare. Figure 55 Delaying a Connection The second response your AP can take is to kick the connections that are pushing it over its balanced bandwidth allotment. Figure 56 Kicking a Connection NWA / WAC Series Users Guide 93 Chapter 7 Wireless Connections are kicked based on either idle timeout or signal strength. The NWA/WAC first looks to see which devices have been idle the longest, then starts kicking them in order of highest idle time. If no connections are idle, the next criteria the NWA/WAC analyzes is signal strength. Devices with the weakest signal strength are kicked first. 7.5 DCS Use this screen to configure dynamic radio channel selection. Click Configuration > Wireless > DCS to access this screen. Figure 57 Configuration > Wireless > DCS Each field is described in the following table. Table 41 Configuration > Wireless > DCS LABEL Select Now Apply Reset DESCRIPTION Click this to have the NWA/WAC scan for and select an available channel immediately. Click Apply to save your changes back to the NWA/WAC. Click Reset to return the screen to its last-saved settings. 7.6 Technical Reference The following section contains additional technical information about the features described in this chapter. Dynamic Channel Selection When numerous APs broadcast within a given area, they introduce the possibility of heightened radio interference, especially if some or all of them are broadcasting on the same radio channel. If the interference becomes too great, then the network administrator must open his AP configuration options and manually change the channel to one that no other AP is using (or at least a channel that has a lower level of interference) in order to give the connected stations a minimum degree of interference. Dynamic channel selection frees the network administrator from this task by letting the AP do it automatically. The AP can scan the area around it looking for the channel with the least amount of interference. In the 2.4 GHz spectrum, each channel from 1 to 13 is broken up into discrete 22 MHz segments that are spaced 5 MHz apart. Channel 1 is centered on 2.412 GHz while channel 13 is centered on 2.472 GHz. NWA / WAC Series Users Guide 94 Chapter 7 Wireless Figure 58 An Example Three-Channel Deployment Three channels are situated in such a way as to create almost no interference with one another if used exclusively: 1, 6 and 11. When an AP broadcasts on any of these three channels, it should not interfere with neighboring APs as long as they are also limited to same trio. Figure 59 An Example Four-Channel Deployment However, some regions require the use of other channels and often use a safety scheme with the following four channels: 1, 4, 7 and 11. While they are situated sufficiently close to both each other and the three so-called safe channels (1,6 and 11) that interference becomes inevitable, the severity of it is dependent upon other factors: proximity to the affected AP, signal strength, activity, and so on. Finally, there is an alternative four channel scheme for ETSI, consisting of channels 1, 5, 9, 13. This offers significantly less overlap that the other one. Figure 60 An Alternative Four-Channel Deployment Load Balancing Because there is a hard upper limit on an APs wireless bandwidth, load balancing can be crucial in areas crowded with wireless users. Rather than let every user connect and subsequently dilute the NWA / WAC Series Users Guide 95 Chapter 7 Wireless available bandwidth to the point where each connecting device receives a meager trickle, the load balanced AP instead limits the incoming connections as a means to maintain bandwidth integrity. There are three kinds of wireless load balancing available on the NWA/WAC:
Load balancing by station number limits the number of devices allowed to connect to your AP. If you know exactly how many stations you want to let connect, choose this option. For example, if your companys graphic design team has their own AP and they have 10 computers, you can load balance for 10. Later, if someone from the sales department visits the graphic design teams offices for a meeting and he tries to access the network, his computers connection is delayed, giving it the opportunity to connect to a different, neighboring AP. If he still connects to the AP regardless of the delay, then the AP may boot other people who are already connected in order to associate with the new connection. Load balancing by smart classroom also limits the number of devices allowed to connect to your AP. But any new connections will be just rejected when the AP is overloaded. Load balancing by traffic level limits the number of connections to the AP based on maximum bandwidth available. If you are uncertain as to the exact number of wireless connections you will have then choose this option. By setting a maximum bandwidth cap, you allow any number of devices to connect as long as their total bandwidth usage does not exceed the configured bandwidth cap associated with this setting. Once the cap is hit, any new connections are rejected or delayed provided that there are other APs in range. Imagine a coffee shop in a crowded business district that offers free wireless connectivity to its customers. The coffee shop owner cant possibly know how many connections his AP will have at any given moment. As such, he decides to put a limit on the bandwidth that is available to his customers but not on the actual number of connections he allows. This means anyone can connect to his wireless network as long as the AP has the bandwidth to spare. If too many people connect and the AP hits its bandwidth cap then all new connections must basically wait for their turn or get shunted to the nearest identical AP. NWA / WAC Series Users Guide 96 CHAPTER 8 Bluetooth 8.1 Overview Use this screen to configure the Bluetooth advertising settings for the NWA/WAC that supports Bluetooth Low Energy (BLE). Bluetooth Low Energy, which is also known as Bluetooth Smart, transmits less data over a shorter distance and consumes less power than classic Bluetooth. 8.1.1 What You Need To Know iBeacon is Apples communication protocol on top of Bluetooth Low Energy wireless technology. Beacons (Bluetooth radio transmitters) or BLE enabled devices broadcast packets to every device around it to announce their presence. Advertising packets contain their iBeacon ID which mainly consists of the UUID, major number, minor number and TX (transmit) power. The ID is used to distinguish beacons in your network. The universally unique identifier (UUID) is a 128-bit (16-byte) number which can be used to identify a service, a device, a manufacturer or an owner. The 2-byte major number is to identify and distinguish a group, and the 2-byte minor number is to identify and distinguish an individual. For example, you can set all the beacons in one network to share the same UUID, the beacons in a particular room to use the same major number, and each beacon in the room can have its own minor number. NETWORK A ROOM X BEACON 1 BEACON 2 ROOM Y BEACON 3 UUID Major Minor EBAECFAF-DFE0-4039-BE5A-F030EED4303C 10 1 10 2 20 1 8.2 Bluetooth Advertising Settings The NWA/WAC communicates with another BLE enabled device using advertisements. Use this screen to configure the beacon ID(s) to be included in the advertising packet. You can have up to five combinations of the UUID, Major and Minor parameters. To access this screen, click Configuration > Bluetooth > Advertising Settings. NWA / WAC Series Users Guide 97 Chapter 8 Bluetooth Figure 61 Configuration > Bluetooth > Advertising Settings The following table describes the labels in this screen. Table 42 Configuration > Bluetooth > Advertising Settings LABEL Edit Activate Inactivate
#
Status DESCRIPTION Click this to edit the selected entry. To turn on an entry, select it and click Activate. To turn off an entry, select it and click Inactivate. This field is a sequential value, and it is not associated with a specific entry. This field shows whether or not the entry is activated. UUID Major Minor A yellow bulb signifies that this rule is active. A gray bulb signifies that this rule is not active. This field indicates the UUID to be included in the Bluetooth advertising packets. This field indicates the major number to be included in the Bluetooth advertising packets. This field indicates the minor number to be included in the Bluetooth advertising packets. 8.2.1 Edit Advertising Settings Select an entry in the Configuration > Bluetooth > Advertising Settings screen and click the Edit icon to open the Edit Advertising screen. Use this screen to configure the beacon ID in the Bluetooth advertising packets. Figure 62 Configuration > Bluetooth > Advertising Settings > Edit NWA / WAC Series Users Guide 98 Chapter 8 Bluetooth The following table describes the labels in this screen. Table 43 Configuration > Bluetooth > Advertising Settings > Edit LABEL Activate UUID DESCRIPTION Select this option to enable the advertising settings. To specify a UUID of the NWA/WACs beacon ID, enter 32 hexadecimal digits in the range of A-F, a-f and 0-9, split into five groups separated by hyphens (-). The UUID format is as follows: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx (8-4-4-4-12) Click this button to have the NWA/WAC generate a UUID automatically. Generate new UUID Major Minor OK Cancel Enter an integer from 0 to 65535 as the major value to identify the beacon. Enter an integer from 0 to 65535 as the minor value to identify the beacon. Click OK to save your changes back to the NWA/WAC. Click Cancel to exit this screen without saving your changes. NWA / WAC Series Users Guide 99 CHAPTER 9 User 9.1 Overview This chapter describes how to set up user accounts and user settings for the NWA/WAC. 9.1.1 What You Can Do in this Chapter The User screen (see Section 9.2 on page 101) provides a summary of all user accounts. The Setting screen (see Section 9.3 on page 103) controls default settings, login settings, lockout settings, and other user settings for the NWA/WAC. 9.1.2 What You Need To Know The following terms and concepts may help as you read this chapter. User Account A user account defines the privileges of a user logged into the NWA/WAC. User accounts are used in controlling access to configuration and services in the NWA/WAC. User Types These are the types of user accounts the NWA/WAC uses. ABILITIES Table 44 Types of User Accounts TYPE Admin Users admin limited-admin Change NWA/WAC configuration (web, CLI) Look at NWA/WAC configuration (web, CLI) LOGIN METHOD(S) WWW, TELNET, SSH, FTP WWW, TELNET, SSH Access Users user Perform basic diagnostics (CLI) Used for the embedded RADIUS server and SNMPv3 user access Browse user-mode commands (CLI) Note: The default admin account is always authenticated locally, regardless of the authentication method setting. NWA / WAC Series Users Guide 100 Chapter 9 User 9.2 User Summary The User screen provides a summary of all user accounts. To access this screen click Configuration >
Object > User. Figure 63 Configuration > Object > User The following table describes the labels in this screen. Table 45 Configuration > Object > User LABEL Add Edit Remove Object Reference
#
User Name User Type DESCRIPTION Click this to create a new entry. Double-click an entry or select it and click Edit to open a screen where you can modify the entrys settings. To remove an entry, select it and click Remove. The NWA/WAC confirms you want to remove it before doing so. Select an entry and click Object Reference to open a screen that shows which settings use the entry. This field is a sequential value, and it is not associated with a specific user. This field displays the user name of each user. This field displays type of user this account was configured as. admin - this user can look at and change the configuration of the NWA/WAC limited-admin - this user can look at the configuration of the NWA/WAC but not to user - this user has access to the NWA/WACs services but cannot look at the change it configuration Description This field displays the description for each user. 9.2.1 Add/Edit User The User Add/Edit screen allows you to create a new user account or edit an existing one. 9.2.1.1 Rules for User Names Enter a user name from 1 to 31 characters. The user name can only contain the following characters:
Alphanumeric A-z 0-9 (there is no unicode support) _ [underscores]
NWA / WAC Series Users Guide 101 Chapter 9 User
- [dashes]
The first character must be alphabetical (A-Z a-z), an underscore (_), or a dash (-). Other limitations on user names are:
User names are case-sensitive. If you enter a user 'bob' but use 'BOB' when connecting via CIFS or FTP, it will use the account settings used for 'BOB' not bob. User names have to be different than user group names. Here are the reserved user names:
adm debug ldap-users operator sync admin any devicehaecived ftp lp radius-users uucp mail root zyxel bin games news shutdown daemon halt nobody sshd To access this screen, go to the User screen, and click Add or Edit. Figure 64 Configuration > Object > User > Add/Edit A User The following table describes the labels in this screen. Table 46 Configuration > User > User > Add/Edit A User LABEL User Name DESCRIPTION Type the user name for this user account. You may use 1-31 alphanumeric characters, underscores(_), or dashes (-), but the first character cannot be a number. This value is case-
sensitive. User names have to be different than user group names, and some words are reserved. Select what type of user this is. Choices are:
admin - this user can look at and change the configuration of the NWA/WAC limited-admin - this user can look at the configuration of the NWA/WAC but not to change it user - this is used for embedded RADIUS server and SNMPv3 user access Enter the password of this user account. It can consist of 4 - 63 alphanumeric characters. Re-enter the password to make sure you have entered it correctly. Enter the description of each user, if any. You can use up to 60 printable ASCII characters. Default descriptions are provided. User Type Password Retype Description NWA / WAC Series Users Guide 102 Chapter 9 User Table 46 Configuration > User > User > Add/Edit A User (continued) LABEL Authentication Timeout Settings DESCRIPTION This field is not available if the user type is user. If you want to set authentication timeout to a value other than the default settings, select Use Manual Settings then fill your preferred values in the fields that follow. This field is not available if the user type is user. Enter the number of minutes this user has to renew the current session before the user is logged out. You can specify 1 to 1440 minutes. You can enter 0 to make the number of minutes unlimited. Admin users renew the session every time the main screen refreshes in the Web Configurator. This field is not available if the user type is user. Type the number of minutes this user can be logged into the NWA/WAC in one session before the user has to log in again. You can specify 1 to 1440 minutes. You can enter 0 to make the number of minutes unlimited. Unlike Lease Time, the user has no opportunity to renew the session without logging out. Click OK to save your changes back to the NWA/WAC. Click Cancel to exit this screen without saving your changes. Lease Time Reauthentication Time OK Cancel 9.3 Setting This screen controls default settings, login settings, lockout settings, and other user settings for the NWA/
WAC. To access this screen, login to the Web Configurator, and click Configuration > Object > User > Setting. NWA / WAC Series Users Guide 103 Chapter 9 User Figure 65 Configuration > Object > User > Setting The following table describes the labels in this screen. Table 47 Configuration > Object > User > Setting LABEL User Default Setting Default Authentication Timeout Settings DESCRIPTION Edit
#
User Type Lease Time These authentication timeout settings are used by default when you create a new user account. They also control the settings for any existing user accounts that are set to use the default settings. You can still manually configure any user accounts authentication timeout settings. Double-click an entry or select it and click Edit to open a screen where you can modify the entrys settings. This field is a sequential value, and it is not associated with a specific entry. These are the kinds of user account the NWA/WAC supports. admin - this user can look at and change the configuration of the NWA/WAC limited-admin - this user can look at the configuration of the NWA/WAC but not to change it user - this is used for embedded RADIUS server and SNMPv3 user access This is the default lease time in minutes for each type of user account. It defines the number of minutes the user has to renew the current session before the user is logged out. Admin users renew the session every time the main screen refreshes in the Web Configurator. This is the default reauthentication time in minutes for each type of user account. It defines the number of minutes the user can be logged into the NWA/WAC in one session before having to log in again. Unlike Lease Time, the user has no opportunity to renew the session without logging out. Reauthentication Time User Logon Settings NWA / WAC Series Users Guide 104 Chapter 9 User Table 47 Configuration > Object > User > Setting (continued) LABEL Limit the number of simultaneous logons for administration account Maximum number per administration account User Lockout Settings Enable logon retry limit Maximum retry count Lockout period Apply Reset DESCRIPTION Select this check box if you want to set a limit on the number of simultaneous logins by admin users. If you do not select this, admin users can login as many times as they want at the same time using the same or different IP addresses. This field is effective when Limit ... for administration account is checked. Type the maximum number of simultaneous logins by each admin user. Select this check box to set a limit on the number of times each user can login unsuccessfully (for example, wrong password) before the IP address is locked out for a specified amount of time. This field is effective when Enable logon retry limit is checked. Type the maximum number of times each user can login unsuccessfully before the IP address is locked out for the specified lockout period. The number must be between 1 and 99. This field is effective when Enable logon retry limit is checked. Type the number of minutes the user must wait to try to login again, if logon retry limit is enabled and the maximum retry count is reached. This number must be between 1 and 65,535 (about 45.5 days). Click Apply to save the changes. Click Reset to return the screen to its last-saved settings. 9.3.1 Edit User Authentication Timeout Settings This screen allows you to set the default authentication timeout settings for the selected type of user account. These default authentication timeout settings also control the settings for any existing user accounts that are set to use the default settings. You can still manually configure any user accounts authentication timeout settings. To access this screen, go to the Configuration > Object > User > Setting screen, select one of the Default Authentication Timeout Settings entry and click the Edit icon. Figure 66 User > Setting > Edit User Authentication Timeout Settings NWA / WAC Series Users Guide 105 Chapter 9 User The following table describes the labels in this screen. Table 48 User > Setting > Edit User Authentication Timeout Settings LABEL User Type DESCRIPTION This read-only field identifies the type of user account for which you are configuring the default settings. admin - this user can look at and change the configuration of the NWA/WAC. limited-admin - this user can look at the configuration of the NWA/WAC but not to change it. Lease Time Enter the number of minutes this type of user account has to renew the current session before the user is logged out. You can specify 1 to 1440 minutes. You can enter 0 to make the number of minutes unlimited. Admin users renew the session every time the main screen refreshes in the Web Configurator. Access users can renew the session by clicking the Renew button on their screen. If you allow access users to renew time automatically, the users can select this check box on their screen as well. In this case, the session is automatically renewed before the lease time expires. Type the number of minutes this type of user account can be logged into the NWA/WAC in one session before the user has to log in again. You can specify 1 to 1440 minutes. You can enter 0 to make the number of minutes unlimited. Unlike Lease Time, the user has no opportunity to renew the session without logging out. Click OK to save your changes back to the NWA/WAC. Click Cancel to exit this screen without saving your changes. Reauthentication Time OK Cancel NWA / WAC Series Users Guide 106 CHAPTER 10 AP Profile 10.1 Overview This chapter shows you how to configure preset profiles for the NWA/WAC. 10.1.1 What You Can Do in this Chapter The Radio screen (Section 10.2 on page 108) creates radio configurations that can be used by the APs. The SSID screen (Section 10.3 on page 114) configures three different types of profiles for your networked APs. 10.1.2 What You Need To Know The following terms and concepts may help as you read this chapter. Wireless Profiles At the heart of all wireless AP configurations on the NWA/WAC are profiles. A profile represents a group of saved settings that you can use across any number of connected APs. You can set up the following wireless profile types:
Radio - This profile type defines the properties of an APs radio transmitter. You can have a maximum of 32 radio profiles on the NWA/WAC. SSID - This profile type defines the properties of a single wireless network signal broadcast by an AP. Each radio on a single AP can broadcast up to 8 SSIDs. You can have a maximum of 32 SSID profiles on the NWA/WAC. Security - This profile type defines the security settings used by a single SSID. It controls the encryption method required for a wireless client to associate itself with the SSID. You can have a maximum of 32 security profiles on the NWA/WAC. MAC Filtering - This profile provides an additional layer of security for an SSID, allowing you to block access or allow access to that SSID based on wireless client MAC addresses. If a clients MAC address is on the list, then it is either allowed or denied, depending on how you set up the MAC Filter profile. You can have a maximum of 32 MAC filtering profiles on the NWA/WAC. Layer-2 Isolation - This profile defines the MAC addresses of the devices that you want to allow the associated wireless clients to have access to when layer-2 isolation is enabled. SSID The SSID (Service Set IDentifier) is the name that identifies the Service Set with which a wireless station is associated. Wireless stations associating to the access point (AP) must have the same SSID. In other words, it is the name of the wireless network that clients use to connect to it. NWA / WAC Series Users Guide 107 Chapter 10 AP Profile WEP WEP (Wired Equivalent Privacy) encryption scrambles all data packets transmitted between the AP and the wireless stations associated with it in order to keep network communications private. Both the wireless stations and the access points must use the same WEP key for data encryption and decryption. WPA2 WPA2 (IEEE 802.11i) is a wireless security standard that defines stronger encryption, authentication and key management than WPA. Key differences between WPA2 and WEP are improved data encryption and user authentication. IEEE 802.1x The IEEE 802.1x standard outlines enhanced security methods for both the authentication of wireless stations and encryption key management. Authentication is done using an external RADIUS server. 10.2 Radio This screen allows you to create radio profiles for the NWA/WAC. A radio profile is a list of settings that an NWA/WAC can use to configure its radio transmitter(s). To access this screen click Configuration >
Object > AP Profile. Note: You can have a maximum of 32 radio profiles on the NWA/WAC. Figure 67 Configuration > Object > AP Profile > Radio The following table describes the labels in this screen. Table 49 Configuration > Object > AP Profile > Radio LABEL Add Edit Remove Activate DESCRIPTION Click this to add a new radio profile. Click this to edit the selected radio profile. Click this to remove the selected radio profile. To turn on an entry, select it and click Activate. NWA / WAC Series Users Guide 108 Chapter 10 AP Profile Table 49 Configuration > Object > AP Profile > Radio (continued) LABEL Inactivate Object Reference
#
Status DESCRIPTION To turn off an entry, select it and click Inactivate. Click this to view which other objects are linked to the selected radio profile. This field is a sequential value, and it is not associated with a specific user. This field shows whether or not the entry is activated. Profile Name Frequency Band Apply Reset A yellow bulb signifies that this rule is active. A gray bulb signifies that this rule is not active. This field indicates the name assigned to the radio profile. This field indicates the frequency band which this radio profile is configured to use. Click Apply to save your changes back to the NWA/WAC. Click Reset to return the screen to its last-saved settings. 10.2.1 Add/Edit Radio Profile This screen allows you to create a new radio profile or edit an existing one. To access this screen, click the Add button or select a radio profile from the list and click the Edit button. NWA / WAC Series Users Guide 109 Chapter 10 AP Profile Figure 68 Configuration > Object > AP Profile > Add/Edit Profile The following table describes the labels in this screen. Table 50 Configuration > Object > AP Profile > Add/Edit Profile LABEL Hide / Show Advanced Settings General Settings DESCRIPTION Click this to hide or show the Advanced Settings in this window. Activate Select this option to make this profile active. NWA / WAC Series Users Guide 110 Chapter 10 AP Profile Table 50 Configuration > Object > AP Profile > Add/Edit Profile (continued) LABEL Profile Name 802.11 Band Channel Width Channel Selection DESCRIPTION Enter up to 31 alphanumeric characters to be used as this profiles name. Spaces and underscores are allowed. Select the wireless band which this radio profile should use. Not all NWA/WACs support both 2.4 GHz and 5 GHz frequency bands. 2.4 GHz is the frequency used by IEEE 802.11b/g/n wireless clients. 5 GHz is the frequency used by IEEE 802.11ac/a/n wireless clients. 11b/g: allows either IEEE 802.11b or IEEE 802.11g compliant WLAN devices to associate with the NWA/WAC. The NWA/WAC adjusts the transmission rate automatically according to the wireless standard supported by the wireless devices. 11b/g/n: allows IEEE802.11b, IEEE802.11g and IEEE802.11n compliant WLAN devices to associate with the NWA/WAC. The transmission rate of your NWA/WAC might be reduced. 11a: allows only IEEE 802.11a compliant WLAN devices to associate with the NWA/WAC. 11a/n: allows both IEEE802.11n and IEEE802.11a compliant WLAN devices to associate with the NWA/WAC. The transmission rate of your NWA/WAC might be reduced. 11ac: allows IEEE 802.11ac compliant WLAN devices to associate with the WAC. Select the channel bandwidth you want to use for your wireless network. Select 20 MHz if you want to lessen radio interference with other wireless devices in your neighborhood. Select 20/40 MHz to allow the NWA/WAC to choose the channel bandwidth (20 or 40 MHz) that has least interference. Select 20/40/80 MHz to allow the NWA/WAC to choose the channel bandwidth (20 or 40 or 80 MHz) that has least interference. This option is available only when you select 11ac in the 802.11 Band field. This is the radio channel which the signal will use for broadcasting by this radio profile. DCS: Choose Dynamic Channel Selection to have the NWA/WAC choose a radio channel that has least interference. Manual: Choose from the available radio channels in the list. If your NWA/WAC is outdoor type, be sure to choose non-indoors channels. Enable DCS Client Aware Select this to have the NWA/WAC switch channels only when there are no clients connected to it. If there is a client connected, the NWA/WAC will not switch channels but generate a log. The NWA/WAC tries to scan and switch channels again at the end of the specified time interval or at the scheduled time. 2.4 GHz Channel Selection Method If you disable this then the NWA/WAC switches channels immediately regardless of any client connections. In this instance, clients that are connected to the NWA/WAC when it switches channels are dropped. Select how you want to specify the channels the NWA/WAC switches between for 2.4 GHz operation. This field appears only when you choose 802.11b/g/n mode. Select auto to have the NWA/WAC display a 2.4 GHz Channel Deployment field you can use to limit channel switching to 3 or 4 channels. Select manual to select the individual channels the NWA/WAC switches between. Note: The method is automatically set to auto when no channel is selected or any one of the previously selected channels is not supported. Channel ID This field is available only when you set Channel Selection to DCS and set 2.4 GHz Channel Selection Method to manual. Select the channels that you want the NWA/WAC to use. NWA / WAC Series Users Guide 111 Chapter 10 AP Profile Table 50 Configuration > Object > AP Profile > Add/Edit Profile (continued) LABEL 2.4 GHz Channel Deployment Enable 5 GHz DFS Aware 5 GHz Channel Selection Method DESCRIPTION This is available when the 2.4 GHz Channel Selection Method is set to auto. Select Three-Channel Deployment to limit channel switching to channels 1,6, and 11, the three channels that are sufficiently attenuated to have almost no impact on one another. In other words, this allows you to minimize channel interference by limiting channel-
hopping to these three safe channels. Select Four-Channel Deployment to limit channel switching to four channels. Depending on the country domain, if the only allowable channels are 1-11 then the NWA/WAC uses channels 1, 4, 7, 11 in this configuration; otherwise, the NWA/WAC uses channels 1, 5, 9, 13 in this configuration. Four channel deployment expands your pool of possible channels while keeping the channel interference to a minimum. This field is available only when you select 11a, 11a/n or 11ac in the 802.11 Band field and set 5 GHz Channel Selection Method to auto. Select this if your APs are operating in an area known to have RADAR devices. This allows the device to downgrade its frequency to below 5 GHz in the event RADAR signal is detected, thus preventing it from interfering with that signal. Enabling this forces the AP to select a non-DFS channel. Select how you want to specify the channels the NWA/WAC switches between for 5 GHz operation. Select Auto to have the NWA/WAC automatically select the best channel. Select manual to select the individual channels the NWA/WAC switches between. Note: The method is automatically set to auto when no channel is selected or any one of the previously selected channels is not supported. Channel ID This field is available only when you set Channel Selection to DCS and set 5 GHz Channel Selection Method to manual. Time Interval DCS Time Interval Schedule Start Time Week Days Advanced Settings Guard Interval Select the channels that you want the NWA/WAC to use. Select this option to have the NWA/WAC survey the other APs within its broadcast radius at the end of the specified time interval. This field is available when you set Channel Selection to DCS and select the Time Interval option. Enter a number of minutes. This regulates how often the NWA/WAC surveys the other APs within its broadcast radius. If the channel on which it is currently broadcasting suddenly comes into use by another AP, the NWA/WAC will then dynamically select the next available clean channel or a channel with lower interference. Select this option to have the NWA/WAC survey the other APs within its broadcast radius at a specific time on selected days of the week. Specify the time of the day (in 24-hour format) to have the NWA/WAC use DCS to automatically scan and find a less-used channel. Select each day of the week to have the NWA/WAC use DCS to automatically scan and find a less-used channel. Set the guard interval for this radio profile to either short or long. This option isnt applicable if you set 802.11 Band to 11a or 11b/g and/or choose 20 MHz channel width. The guard interval is the gap introduced between data transmission from users in order to reduce interference. Reducing the interval increases data transfer rates but also increases interference. Increasing the interval reduces data transfer rates but also reduces interference. NWA / WAC Series Users Guide 112 Chapter 10 AP Profile Enable A-MPDU Aggregation Enable A-MSDU Aggregation Table 50 Configuration > Object > AP Profile > Add/Edit Profile (continued) LABEL DESCRIPTION Select this to enable A-MPDU aggregation. This field is not available if you set 802.11 Band to 11a or 11b/g. Message Protocol Data Unit (MPDU) aggregation collects Ethernet frames along with their 802.11n headers and wraps them in a 802.11n MAC header. This method is useful for increasing bandwidth throughput in environments that are prone to high error rates. Select this to enable A-MSDU aggregation. This field is not available if you set 802.11 Band to 11a or 11b/g. Mac Service Data Unit (MSDU) aggregation collects Ethernet frames without any of their 802.11n headers and wraps the header-less payload in a single 802.11n MAC header. This method is useful for increasing bandwidth throughput. It is also more efficient than A-MPDU except in environments that are prone to high error rates. RTS/CTS Threshold Use RTS/CTS to reduce data collisions on the wireless network if you have wireless clients that are associated with the same AP but out of range of one another. When enabled, a wireless client sends an RTS (Request To Send) and then waits for a CTS (Clear To Send) before it transmits. This stops wireless clients from transmitting packets at the same time
(and causing data collisions). A wireless client sends an RTS for all packets larger than the number (of bytes) that you enter here. Set the RTS/CTS equal to or higher than the fragmentation threshold to turn RTS/
CTS off. When a wirelessly networked device sends a beacon, it includes with it a beacon interval. This specifies the time period before the device sends the beacon again. The interval tells receiving devices on the network how long they can wait in low-power mode before waking up to handle the beacon. A high value helps save current consumption of the access point. Delivery Traffic Indication Message (DTIM) is the time period after which broadcast and multicast packets are transmitted to mobile clients in the Active Power Management mode. A high DTIM value can cause clients to lose connectivity with the network. This value can be set from 1 to 255. Select the check box to use the signal threshold to ensure wireless clients receive good throughput. This allows only wireless clients with a strong signal to connect to the AP. Clear the check box to not require wireless clients to have a minimum signal strength to connect to the AP. Set a minimum client signal strength. A wireless client is allowed to connect to the AP only when its signal strength is stronger than the specified threshold. Beacon Interval DTIM Enable Signal Threshold Station Signal Threshold Disassociate Station Threshold
-20 dBm is the strongest signal you can require and -76 is the weakest. Set a minimum kick-off signal strength. When a wireless clients signal strength is lower than the specified threshold, the NWA/WAC disconnects the wireless client from the AP. Allow Station Connection after Multiple Retries Station Retry Count Allow 802.11n/ac stations only Multicast Settings
-20 dBm is the strongest signal you can require and -90 is the weakest. Select this option to allow a wireless client to try to associate with the AP again after it is disconnected due to weak signal strength. Set the maximum number of times a wireless client can attempt to re-connect to the AP Select this option to allow only 802.11 n/ac clients to connect, and reject 802.11a/b/g clients. NWA / WAC Series Users Guide 113 Chapter 10 AP Profile Table 50 Configuration > Object > AP Profile > Add/Edit Profile (continued) LABEL DESCRIPTION Specify how the NWA/WAC handles wireless multicast traffic. Select Multicast to Unicast to broadcast wireless multicast traffic to all of the wireless clients as unicast traffic. Unicast traffic dynamically changes the data rate based on the applications bandwidth requirements. The retransmit mechanism of unicast traffic provides more reliable transmission of the multicast traffic, although it also produces duplicate packets. Select Fixed Multicast Rate to send multicast traffic to all wireless clients at a single data rate. You must know the multicast applications bandwidth requirements and set it in the following field. If you set Transmission Mode to Fixed Multicast Rate, select a data rate at which the NWA/
WAC transmits multicast packets to wireless clients. For example, to deploy 4 Mbps video, select a fixed multicast rate higher than 4 Mbps. Click OK to save your changes back to the NWA/WAC. Click Cancel to exit this screen without saving your changes. Transmission Mode Multicast Rate(Mbps) OK Cancel 10.3 SSID The SSID screens allow you to configure three different types of profiles for your networked APs: an SSID list, which can assign specific SSID configurations to your APs; a security list, which can assign specific encryption methods to the APs when allowing wireless clients to connect to them; and a MAC filter list, which can limit connections to an AP based on wireless clients MAC addresses. 10.3.1 SSID List This screen allows you to create and manage SSID configurations that can be used by the APs. An SSID, or Service Set IDentifier, is basically the name of the wireless network to which a wireless client can connect. The SSID appears as readable text to any device capable of scanning for wireless frequencies
(such as the WiFi adapter in a laptop), and is displayed as the wireless network name when a person makes a connection to it. To access this screen click Configuration > Object > AP Profile > SSID > SSID List. Note: You cannot add or remove an SSID profile after running the setup wizard. Figure 69 Configuration > Object > AP Profile > SSID > SSID List (Default) NWA / WAC Series Users Guide 114 Chapter 10 AP Profile Figure 70 Configuration > Object > AP Profile > SSID > SSID List (After wizard setup) The following table describes the labels in this screen. Table 51 Configuration > Object > AP Profile > SSID List LABEL Add DESCRIPTION Click this to add a new SSID profile. Edit Remove Object Reference
#
Profile Name SSID Security Profile QoS MAC Filtering Profile Layer-2 Isolation Profile VLAN ID This button is not available after you configure the NWA/WACusing the wizard. Click this to edit the selected SSID profile. Click this to remove the selected SSID profile. This button is not available after you configure the NWA/WACusing the wizard. Click this to view which other objects are linked to the selected SSID profile (for example, radio profile). This field is a sequential value, and it is not associated with a specific user. This field indicates the name assigned to the SSID profile. This field indicates the SSID name as it appears to wireless clients. This field indicates which (if any) security profile is associated with the SSID profile. This field indicates the QoS type associated with the SSID profile. This field indicates which (if any) MAC filter Profile is associated with the SSID profile. This field indicates which (if any) layer-2 isolation Profile is associated with the SSID profile. This field indicates the VLAN ID associated with the SSID profile. 10.3.2 Add/Edit SSID Profile This screen allows you to create a new SSID profile or edit an existing one. To access this screen, click the Add button or select a SSID profile from the list and click the Edit button. NWA / WAC Series Users Guide 115 Chapter 10 AP Profile Figure 71 Configuration > Object > AP Profile > Add/Edit SSID Profile The following table describes the labels in this screen. Table 52 Configuration > Object > AP Profile > Add/Edit SSID Profile LABEL Create new Object Profile Name DESCRIPTION Select an object type from the list to create a new one associated with this SSID profile. Enter up to 31 alphanumeric characters for the profile name. This name is only visible in the Web Configurator and is only for management purposes. Spaces and underscores are allowed. Enter the SSID name for this profile. This is the name visible on the network to wireless clients. Enter up to 32 characters, spaces and underscores are allowed. Select a security profile from this list to associate with this SSID. If none exist, you can use the Create new Object menu to create one. SSID Security Profile Note: It is highly recommended that you create security profiles for all of your SSIDs to enhance your network security. MAC Filtering Profile Select a MAC filtering profile from the list to associate with this SSID. If none exist, you can use the Create new Object menu to create one. MAC filtering allows you to limit the wireless clients connecting to your network through a particular SSID by wireless client MAC addresses. Any clients that have MAC addresses not in the MAC filtering profile of allowed addresses are denied connections. The disable setting means no MAC filtering is used. NWA / WAC Series Users Guide 116 Chapter 10 AP Profile Table 52 Configuration > Object > AP Profile > Add/Edit SSID Profile (continued) LABEL Layer-2 Isolation Profile DESCRIPTION Select a layer-2 isolation profile from the list to associate with this SSID. If none exist, you can use the Create new Object menu to create one. Layer-2 isolation allows you to prevent wireless clients associated with your NWA/WAC from communicating with other wireless clients, APs, computers or routers in a network. The disable setting means no layer-2 isolation is used. Select a Quality of Service (QoS) access category to associate with this SSID. Access categories minimize the delay of data packets across a wireless network. Certain categories, such as video or voice, are given a higher priority due to the time sensitive nature of their data packets. QoS access categories are as follows:
disable: Turns off QoS for this SSID. All data packets are treated equally and not tagged with access categories. WMM: Enables automatic tagging of data packets. The NWA/WAC assigns access categories to the SSID by examining data as it passes through it and making a best guess effort. If something looks like video traffic, for instance, it is tagged as such. WMM_VOICE: All wireless traffic to the SSID is tagged as voice data. This is recommended if an SSID is used for activities like placing and receiving VoIP phone calls. WMM_VIDEO: All wireless traffic to the SSID is tagged as video data. This is recommended for activities like video conferencing. WMM_BEST_EFFORT: All wireless traffic to the SSID is tagged as best effort, meaning the data travels the best route it can without displacing higher priority traffic. This is good for activities that do not require the best bandwidth throughput, such as surfing the Internet. WMM_BACKGROUND: All wireless traffic to the SSID is tagged as low priority or background traffic, meaning all other access categories take precedence over this one. If traffic from an SSID does not have strict throughput requirements, then this access category is recommended. For example, an SSID that only has network printers connected to it. Define the maximum incoming transmission data rate (either in mbps or kbps) on a perstation basis. Define the maximum outgoing transmission data rate (either in mbps or kbps) on a perstation basis. Enter a VLAN ID for the NWA/WAC to use to tag traffic originating from this SSID. Select this if you want to hide your SSID from wireless clients. This tells any wireless clients in the vicinity of the AP using this SSID profile not to display its SSID name as a potential connection. Not all wireless clients respect this flag and display it anyway. When a SSID is hidden and a wireless client cannot see it, the only way you can connect to the SSID is by manually entering the SSID name in your wireless connection setup screen(s)
(these vary by client, client connectivity software, and operating system). Select this option to prevent crossover traffic from within the same SSID on the NWA/WAC. Select this option to enable Unscheduled Automatic Power Save Delivery (U-APSD), which is also known as WMM-Power Save. This helps increase battery life for battery-powered wireless clients connected to the NWA/WAC using this SSID profile. Select this option and set whether the SSID is enabled or disabled on each day of the week. You also need to select the hour and minute (in 24-hour format) to specify the time period of each day during which the SSID is enabled/enabled. Click OK to save your changes back to the NWA/WAC. Click Cancel to exit this screen without saving your changes. QoS Rate Limiting Downlink Uplink VLAN ID Hidden SSID Enable Intra-BSS Traffic Blocking Enable U-APSD Schedule SSID OK Cancel NWA / WAC Series Users Guide 117 Chapter 10 AP Profile 10.4 Security List This screen allows you to manage wireless security configurations that can be used by your SSIDs. Wireless security is implemented strictly between the AP broadcasting the SSID and the stations that are connected to it. To access this screen click Configuration > Object > AP Profile > SSID > Security List. Note: You can have a maximum of 32 security profiles on the NWA/WAC. Figure 72 Configuration > Object > AP Profile > SSID > Security List The following table describes the labels in this screen. Table 53 Configuration > Object > AP Profile > SSID > Security List LABEL Add Edit Remove Object Reference
#
Profile Name Security Mode DESCRIPTION Click this to add a new security profile. Click this to edit the selected security profile. Click this to remove the selected security profile. Click this to view which other objects are linked to the selected security profile (for example, SSID profile). This field is a sequential value, and it is not associated with a specific user. This field indicates the name assigned to the security profile. This field indicates this profiles security mode (if any). 10.4.1 Add/Edit Security Profile This screen allows you to create a new security profile or edit an existing one. To access this screen, click the Add button or select a security profile from the list and click the Edit button. Note: This screens options change based on the Security Mode selected. Only the default screen is displayed here. NWA / WAC Series Users Guide 118 Chapter 10 AP Profile Figure 73 Configuration > Object > AP Profile > SSID > Security List > Add/Edit Security Profile The following table describes the labels in this screen. Table 54 Configuration > Object > AP Profile > SSID > Security List > Add/Edit Security Profile LABEL Profile Name DESCRIPTION Enter up to 31 alphanumeric characters for the profile name. This name is only visible in the Web Configurator and is only for management purposes. Spaces and underscores are allowed. Select a security mode from the list: none, wep, wpa2, or wpa2-mix. This shows External and the NWA/WAC uses an external RADIUS server for authentication. Security Mode Radius Server Type NWA / WAC Series Users Guide 119 Chapter 10 AP Profile Table 54 Configuration > Object > AP Profile > SSID > Security List > Add/Edit Security Profile (continued) LABEL Primary / Secondary Radius Server Activate DESCRIPTION Select this to have the NWA/WAC use the specified RADIUS server. Radius Server IP Address Radius Server Port Radius Server Secret Primary / Secondary Accounting Server Activate Accounting Server IP Address Accounting Server Port Accounting Share Secret Accounting Interim Update Interim Update Interval 802.1X ReAuthenticatio n Timer Enter the IP address of the RADIUS server to be used for authentication. Enter the port number of the RADIUS server to be used for authentication. Enter the shared secret password of the RADIUS server to be used for authentication. Select the check box to enable user accounting through an external authentication server. Enter the IP address of the external accounting server in dotted decimal notation. Enter the port number of the external accounting server. The default port number is 1813. You need not change this value unless your network administrator instructs you to do so with additional information. Enter a password (up to 128 alphanumeric characters) as the key to be shared between the external accounting server and the NWA/WAC. The key must be the same on the external accounting server and your NWA/WAC. The key is not sent over the network. This field is available only when you enable user accounting through an external authentication server. Select this to have the NWA/WAC send subscriber status updates to the accounting server at the interval you specify. Specify the time interval for how often the NWA/WAC is to send a subscriber status update to the accounting server. Select this to enable 802.1x secure authentication. Enter the interval (in seconds) between authentication requests. Enter a 0 for unlimited requests. WEP Authentication Settings Idle Timeout Enter the idle interval (in seconds) that a client can be idle before authentication is discontinued. Authentication Type Select a WEP authentication method. Choices are Open or Share key. Share key is only Key Length available if you are not using 802.1x. Select the bit-length of the encryption key to be used in WEP connections. If you select WEP-64:
Enter 10 hexadecimal digits in the range of A-F, a-f and 0-9 (for example, 0x11AA22BB33) for each Key used. or Enter 5 ASCII characters (case sensitive) ranging from a-z, A-Z and 0-9 (for example, MyKey) for each Key used. If you select WEP-128:
Enter 26 hexadecimal digits in the range of A-F, a-f and 0-9 (for example, 0x00112233445566778899AABBCC) for each Key used. or Enter 13 ASCII characters (case sensitive) ranging from a-z, A-Z and 0-9 (for example, MyKey12345678) for each Key used. Key 1~4 WPA2/WPA2-Mix Authentication Settings Based on your Key Length selection, enter the appropriate length hexadecimal or ASCII key. NWA / WAC Series Users Guide 120 Chapter 10 AP Profile Table 54 Configuration > Object > AP Profile > SSID > Security List > Add/Edit Security Profile (continued) LABEL PSK DESCRIPTION This field is available when you select the wpa2, or wpa2-mix security mode. Pre-Shared Key Cipher Type Idle Timeout Group Key Update Timer Management Frame Protection OK Cancel Select this option to use a Pre-Shared Key with WPA2 encryption. Enter a pre-shared key of between 8 and 63 case-sensitive ASCII characters (including spaces and symbols) or 64 hexadecimal characters. Select an encryption cipher type from the list. auto - This automatically chooses the best available cipher based on the cipher in use by the wireless client that is attempting to make a connection. aes - This is the Advanced Encryption Standard encryption method. It is a more recent development over TKIP and considerably more robust. Not all wireless clients may support this. Enter the interval (in seconds) that a client can be idle before authentication is discontinued. Enter the interval (in seconds) at which the AP updates the group WPA2 encryption key. This field is available only when you select wpa2 in the Security Mode field and set Cipher Type to aes. Data frames in 802.11 WLANs can be encrypted and authenticated with WEP, WPA or WPA2. But 802.11 management frames, such as beacon/probe response, association request, association response, de-authentication and disassociation are always unauthenticated and unencrypted. IEEE 802.11w Protected Management Frames allows APs to use the existing security mechanisms (encryption and authentication methods defined in IEEE 802.11i WPA/WPA2) to protect management frames. This helps prevent wireless DoS attacks. Select the check box to enable management frame protection (MFP) to add security to 802.11 management frames. Select Optional if you do not require the wireless clients to support MFP. Management frames will be encrypted if the clients support MFP. Select Required and wireless clients must support MFP in order to join the NWA/WACs wireless network. Click OK to save your changes back to the NWA/WAC. Click Cancel to exit this screen without saving your changes. 10.5 MAC Filter List This screen allows you to create and manage security configurations that can be used by your SSIDs. To access this screen click Configuration > Object > AP Profile > SSID > MAC Filter List. Note: You can have a maximum of 32 MAC filtering profiles on the NWA/WAC. NWA / WAC Series Users Guide 121 Chapter 10 AP Profile Figure 74 Configuration > Object > AP Profile > SSID > MAC Filter List The following table describes the labels in this screen. Table 55 Configuration > Object > AP Profile > SSID > MAC Filter List LABEL Add Edit Remove Object Reference
#
Profile Name Filter Action DESCRIPTION Click this to add a new MAC filtering profile. Click this to edit the selected MAC filtering profile. Click this to remove the selected MAC filtering profile. Click this to view which other objects are linked to the selected MAC filtering profile (for example, SSID profile). This field is a sequential value, and it is not associated with a specific user. This field indicates the name assigned to the MAC filtering profile. This field indicates this profiles filter action (if any). 10.5.1 Add/Edit MAC Filter Profile This screen allows you to create a new MAC filtering profile or edit an existing one. To access this screen, click the Add button or select a MAC filter profile from the list and click the Edit button. Note: Each MAC filtering profile can include a maximum of 512 MAC addresses. Figure 75 Configuration > Object > AP Profile > SSID > MAC Filter List > Add/Edit MAC Filter Profile NWA / WAC Series Users Guide 122 Chapter 10 AP Profile The following table describes the labels in this screen. Table 56 Configuration > Object > AP Profile > SSID > MAC Filter List > Add/Edit MAC Filter Profile LABEL Profile Name DESCRIPTION Enter up to 31 alphanumeric characters for the profile name. This name is only visible in the Web Configurator and is only for management purposes. Spaces and underscores are allowed. Select allow to permit the wireless client with the MAC addresses in this profile to connect to the network through the associated SSID; select deny to block the wireless clients with the specified MAC addresses. Click this to add a MAC address to the profiles list. Click this to edit the selected MAC address in the profiles list. Click this to remove the selected MAC address from the profiles list. This field is a sequential value, and it is not associated with a specific user. This field specifies a MAC address associated with this profile. You can click the MAC address to make it editable. This field displays a description for the MAC address associated with this profile. You can click the description to make it editable. Enter up to 60 characters, spaces and underscores allowed. Click OK to save your changes back to the NWA/WAC. Click Cancel to exit this screen without saving your changes. Filter Action Add Edit Remove
#
MAC Description OK Cancel 10.6 Layer-2 Isolation List Layer-2 isolation is used to prevent wireless clients associated with your NWA/WAC from communicating with other wireless clients, APs, computers or routers in a network. In the following example, layer-2 isolation is enabled on the NWA/WAC to allow a guest wireless client
(A) to access the main network router (B). The router provides access to the Internet and the network printer (C) while preventing the client from accessing other computers and servers on the network. The client can communicate with other wireless clients only if Intra-BSS Traffic blocking is disabled. Note: Intra-BSS Traffic Blocking is activated when you enable layer-2 isolation. Figure 76 Layer-2 Isolation Application NWA / WAC Series Users Guide 123 Chapter 10 AP Profile MAC addresses that are not listed in the layer-2 isolation table are blocked from communicating with the NWA/WACs wireless clients except for broadcast packets. Layer-2 isolation does not check the traffic between wireless clients that are associated with the same AP. Intra-BSS traffic allows wireless clients associated with the same AP to communicate with each other. This screen allows you to specify devices you want the users on your wireless networks to access. To access this screen click Configuration > Object > AP Profile > SSID > Layer-2 Isolation List. Figure 77 Configuration > Object > AP Profile > SSID > Layer-2 Isolation List The following table describes the labels in this screen. Table 57 Configuration > Object > AP Profile > SSID > Layer-2 Isolation List LABEL Add Edit Remove Object Reference
#
Profile Name DESCRIPTION Click this to add a new MAC filtering profile. Click this to edit the selected MAC filtering profile. Click this to remove the selected MAC filtering profile. Click this to view which other objects are linked to the selected MAC filtering profile (for example, SSID profile). This field is a sequential value, and it is not associated with a specific user. This field indicates the name assigned to the layer-2 isolation profile. 10.6.1 Add/Edit Layer-2 Isolation Profile This screen allows you to create a new layer-2 isolation profile or edit an existing one. To access this screen, click the Add button or select a layer-2 isolation profile from the list and click the Edit button. Note: You need to know the MAC address of each wireless client, AP, computer or router that you want to allow to communicate with the NWA/WAC's wireless clients. NWA / WAC Series Users Guide 124 Chapter 10 AP Profile Figure 78 Configuration > Object > AP Profile > SSID > Layer-2 Isolation List > Add/Edit Layer-2 Isolation Profile The following table describes the labels in this screen. Table 58 Configuration > Object > AP Profile > SSID > Layer-2 Isolation List > Add/Edit Layer-2 Isolation Profile LABEL Profile Name DESCRIPTION Enter up to 31 alphanumeric characters for the profile name. This name is only visible in the Web Configurator and is only for management purposes. Spaces and underscores are allowed. Click this to add a MAC address to the profiles list. Click this to edit the selected MAC address in the profiles list. Click this to remove the selected MAC address from the profiles list. This field is a sequential value, and it is not associated with a specific user. This field specifies a MAC address associated with this profile. You can click the MAC address to make it editable. This field displays a description for the MAC address associated with this profile. You can click the description to make it editable. Enter up to 60 characters, spaces and underscores allowed. Click OK to save your changes back to the NWA/WAC. Click Cancel to exit this screen without saving your changes. Add Edit Remove
#
MAC Description OK Cancel NWA / WAC Series Users Guide 125 CHAPTER 11 MON Profile 11.1 Overview This screen allows you to set up monitor mode configurations that allow your NWA/WAC to scan for other wireless devices in the vicinity. Once detected, you can use the Wireless > MON Mode screen
(Section 7.3 on page 88) to classify them as either rogue or friendly. Not all NWA/WACs support monitor mode and rogue APs detection. 11.1.1 What You Can Do in this Chapter The MON Profile screen (Section 11.2 on page 126) creates preset monitor mode configurations that can be used by the NWA/WAC. 11.2 MON Profile This screen allows you to create monitor mode configurations that can be used by the APs. To access this screen, log into the Web Configurator, and click Configuration > Object > MON Profile. Figure 79 Configuration > Object > MON Profile The following table describes the labels in this screen. Table 59 Configuration > Object > MON Profile LABEL Add Edit Remove Activate Inactivate DESCRIPTION Click this to add a new monitor mode profile. Click this to edit the selected monitor mode profile. Click this to remove the selected monitor mode profile. To turn on an entry, select it and click Activate. To turn off an entry, select it and click Inactivate. NWA / WAC Series Users Guide 126 Chapter 11 MON Profile Table 59 Configuration > Object > MON Profile (continued) LABEL Object Reference
#
Status Profile Name DESCRIPTION Click this to view which other objects are linked to the selected monitor mode profile (for example, an AP management profile). This field is a sequential value, and it is not associated with a specific profile. This field shows whether or not the entry is activated. This field indicates the name assigned to the monitor profile. 11.2.1 Add/Edit MON Profile This screen allows you to create a new monitor mode profile or edit an existing one. To access this screen, click the Add button or select and existing monitor mode profile and click the Edit button. Figure 80 Configuration > Object > MON Profile > Add/Edit MON Profile NWA / WAC Series Users Guide 127 Chapter 11 MON Profile The following table describes the labels in this screen. Table 60 Configuration > Object > MON Profile > Add/Edit MON Profile LABEL Activate Profile Name Channel dwell time DESCRIPTION Select this to activate this monitor mode profile. This field indicates the name assigned to the monitor mode profile. Enter the interval (in milliseconds) before the NWA/WAC switches to another channel for monitoring. Select auto to have the NWA/WAC switch to the next sequential channel once the Channel dwell time expires. Select manual to set specific channels through which to cycle sequentially when the Channel dwell time expires. Selecting this options makes the Scan Channel List options available. Select one or more than one channel to have the NWA/WAC using this profile scan the channel(s) when Scan Channel Mode is set to manual. Scan Channel Mode Set Scan Channel List
(2.4 GHz) Set Scan Channel List
(5 GHz) These channels are limited to the 2.4 GHz range (802.11 b/g/n). Select one or more than one channel to have the NWA/WAC using this profile scan the channel(s) when Scan Channel Mode is set to manual. OK Cancel These channels are limited to the 5 GHz range (802.11 a/n). Not all NWA/WACs support both 2.4 GHz and 5 GHz frequency bands. Click OK to save your changes back to the NWA/WAC. Click Cancel to exit this screen without saving your changes. 11.3 Technical Reference The following section contains additional technical information about the features described in this chapter. Rogue APs Rogue APs are wireless access points operating in a networks coverage area that are not under the control of the networks administrators, and can open up holes in a networks security. Attackers can take advantage of a rogue APs weaker (or non-existent) security to gain access to the network, or set up their own rogue APs in order to capture information from wireless clients. If a scan reveals a rogue AP, you can use commercially-available software to physically locate it. NWA / WAC Series Users Guide 128 Chapter 11 MON Profile Figure 81 Rogue AP Example In the example above, a corporate networks security is compromised by a rogue AP (RG) set up by an employee at his workstation in order to allow him to connect his notebook computer wirelessly (A). The companys legitimate wireless network (the dashed ellipse B) is well-secured, but the rogue AP uses inferior security that is easily broken by an attacker (X) running readily available encryption-cracking software. In this example, the attacker now has access to the company network, including sensitive data stored on the file server (C). Friendly APs If you have more than one AP in your wireless network, you should also configure a list of friendly APs. Friendly APs are other wireless access points that are detected in your network, as well as any others that you know are not a threat (those from recognized networks, for example). It is recommended that you export (save) your list of friendly APs often, especially if you have a network with a large number of access points. NWA / WAC Series Users Guide 129 CHAPTER 12 WDS Profile 12.1 Overview This chapter shows you how to configure WDS (Wireless Distribution System) profiles for the NWA/WAC to form a WDS with other APs. 12.1.1 What You Can Do in this Chapter The WDS Profile screen (Section 12.2 on page 130) creates preset WDS configurations that can be used by the NWA/WAC. 12.2 WDS Profile This screen allows you to manage and create WDS profiles that can be used by the APs. To access this screen, click Configuration > Object > WDS Profile. Figure 82 Configuration > Object > WDS Profile The following table describes the labels in this screen. Table 61 Configuration > Object > WDS Profile LABEL Add Edit Remove
#
Profile Name WDS SSID DESCRIPTION Click this to add a new profile. Click this to edit the selected profile. Click this to remove the selected profile. This field is a sequential value, and it is not associated with a specific profile. This field indicates the name assigned to the profile. This field shows the SSID specified in this WDS profile. NWA / WAC Series Users Guide 130 Chapter 12 WDS Profile 12.2.1 Add/Edit WDS Profile This screen allows you to create a new WDS profile or edit an existing one. To access this screen, click the Add button or select and existing profile and click the Edit button. Figure 83 Configuration > Object > WDS Profile > Add/Edit WDS Profile The following table describes the labels in this screen. Table 62 Configuration > Object > WDS Profile > Add/Edit WDS Profile LABEL Profile Name WDS SSID DESCRIPTION Enter up to 31 alphanumeric characters for the profile name. Enter the SSID with which you want the NWA/WAC to connect to a root AP or repeater to form a WDS. Enter a pre-shared key of between 8 and 63 case-sensitive ASCII characters (including spaces and symbols) or 64 hexadecimal characters. Pre-Shared Key OK Cancel The key is used to encrypt the traffic between the APs. Click OK to save your changes back to the NWA/WAC. Click Cancel to exit this screen without saving your changes. NWA / WAC Series Users Guide 131 CHAPTER 13 Certificates 13.1 Overview The NWA/WAC can use certificates (also called digital IDs) to authenticate users. Certificates are based on public-private key pairs. A certificate contains the certificate owners identity and public key. Certificates provide a way to exchange public keys for use in authentication. 13.1.1 What You Can Do in this Chapter The My Certificates screens (Section 13.2 on page 135) generate and export self-signed certificates or certification requests and import the NWA/WACs CA-signed certificates. The Trusted Certificates screens (Section 13.3 on page 142) save CA certificates and trusted remote host certificates to the NWA/WAC. The NWA/WAC trusts any valid certificate that you have imported as a trusted certificate. It also trusts any valid certificate signed by any of the certificates that you have imported as a trusted certificate. 13.1.2 What You Need to Know The following terms and concepts may help as you read this chapter. When using public-key cryptology for authentication, each host has two keys. One key is public and can be made openly available. The other key is private and must be kept secure. These keys work like a handwritten signature (in fact, certificates are often referred to as digital signatures). Only you can write your signature exactly as it should look. When people know what your signature looks like, they can verify whether something was signed by you, or by someone else. In the same way, your private key writes your digital signature and your public key allows people to verify whether data was signed by you, or by someone else. This process works as follows:
1 2 3 4 Tim wants to send a message to Jenny. He needs her to be sure that it comes from him, and that the message content has not been altered by anyone else along the way. Tim generates a public key pair
(one public key and one private key). Tim keeps the private key and makes the public key openly available. This means that anyone who receives a message seeming to come from Tim can read it and verify whether it is really from him or not. Tim uses his private key to sign the message and sends it to Jenny. Jenny receives the message and uses Tims public key to verify it. Jenny knows that the message is from Tim, and that although other people may have been able to read the message, no-one can have altered it (because they cannot re-sign the message with Tims private key). NWA / WAC Series Users Guide 132 Chapter 13 Certificates 5 Additionally, Jenny uses her own private key to sign a message and Tim uses Jennys public key to verify the message. The NWA/WAC uses certificates based on public-key cryptology to authenticate users attempting to establish a connection, not to encrypt the data that you send after establishing a connection. The method used to secure the data that you send through an established connection depends on the type of connection. The certification authority uses its private key to sign certificates. Anyone can then use the certification authoritys public key to verify the certificates. A certification path is the hierarchy of certification authority certificates that validate a certificate. The NWA/WAC does not trust a certificate if any certificate on its path has expired or been revoked. Certification authorities maintain directory servers with databases of valid and revoked certificates. A directory of certificates that have been revoked before the scheduled expiration is called a CRL
(Certificate Revocation List). The NWA/WAC can check a peers certificate against a directory servers list of revoked certificates. The framework of servers, software, procedures and policies that handles keys is called PKI (public-key infrastructure). Advantages of Certificates Certificates offer the following benefits. The NWA/WAC only has to store the certificates of the certification authorities that you decide to trust, no matter how many devices you need to authenticate. Key distribution is simple and very secure since you can freely distribute public keys and you never need to transmit private keys. Self-signed Certificates You can have the NWA/WAC act as a certification authority and sign its own certificates. Factory Default Certificate The NWA/WAC generates its own unique self-signed certificate when you first turn it on. This certificate is referred to in the GUI as the factory default certificate. Certificate File Formats Any certificate that you want to import has to be in one of these file formats:
Binary X.509: This is an ITU-T recommendation that defines the formats for X.509 certificates. PEM (Base-64) encoded X.509: This Privacy Enhanced Mail format uses lowercase letters, uppercase letters and numerals to convert a binary X.509 certificate into a printable form. Binary PKCS#7: This is a standard that defines the general syntax for data (including digital signatures) that may be encrypted. A PKCS #7 file is used to transfer a public key certificate. The private key is not included. The NWA/WAC currently allows the importation of a PKS#7 file that contains a single certificate. PEM (Base-64) encoded PKCS#7: This Privacy Enhanced Mail (PEM) format uses lowercase letters, uppercase letters and numerals to convert a binary PKCS#7 certificate into a printable form. NWA / WAC Series Users Guide 133 Chapter 13 Certificates Binary PKCS#12: This is a format for transferring public key and private key certificates.The private key in a PKCS #12 file is within a password-encrypted envelope. The files password is not connected to your certificates public or private passwords. Exporting a PKCS #12 file creates this and you must provide it to decrypt the contents when you import the file into the NWA/WAC. Note: Be careful not to convert a binary file to text during the transfer process. It is easy for this to occur since many programs use text files by default. 13.1.3 Verifying a Certificate Before you import a trusted certificate into the NWA/WAC, you should verify that you have the correct certificate. You can do this using the certificates fingerprint. A certificates fingerprint is a message digest calculated using the MD5 or SHA1 algorithm. The following procedure describes how to check a certificates fingerprint to verify that you have the actual certificate. 1 Browse to where you have the certificate saved on your computer. 2 Make sure that the certificate has a .cer or .crt file name extension. 3 Double-click the certificates icon to open the Certificate window. Click the Details tab and scroll down to the Thumbprint Algorithm and Thumbprint fields. 4 Use a secure method to verify that the certificate owner has the same information in the Thumbprint Algorithm and Thumbprint fields. The secure method may very based on your situation. Possible examples would be over the telephone or through an HTTPS connection. NWA / WAC Series Users Guide 134 Chapter 13 Certificates 13.2 My Certificates Click Configuration > Object > Certificate > My Certificates to open this screen. This is the NWA/WACs summary list of certificates and certification requests. Figure 84 Configuration > Object > Certificate > My Certificates The following table describes the labels in this screen. Table 63 Configuration > Object > Certificate > My Certificates LABEL PKI Storage Space in Use DESCRIPTION This bar displays the percentage of the NWA/WACs PKI storage space that is currently in use. When the storage space is almost full, you should consider deleting expired or unnecessary certificates before adding more certificates. Click this to go to the screen where you can have the NWA/WAC generate a certificate or a certification request. Double-click an entry or select it and click Edit to open a screen with an in-depth list of information about the certificate. The NWA/WAC keeps all of your certificates unless you specifically delete them. Uploading a new firmware or default configuration file does not delete your certificates. To remove an entry, select it and click Remove. The NWA/WAC confirms you want to remove it before doing so. Subsequent certificates move up by one when you take this action. You cannot delete certificates that any of the NWA/WACs features are configured to use. Select an entry and click Object Reference to open a screen that shows which settings use the entry. This field displays the certificate index number. The certificates are listed in alphabetical order. This field displays the name used to identify this certificate. It is recommended that you give each certificate a unique name. This field displays what kind of certificate this is. REQ represents a certification request and is not yet a valid certificate. Send a certification request to a certification authority, which then issues a certificate. Use the My Certificate Import screen to import the certificate and replace the request. SELF represents a self-signed certificate. CERT represents a certificate issued by a certification authority. This field displays identifying information about the certificates owner, such as CN (Common Name), OU (Organizational Unit or department), O (Organization or company) and C
(Country). It is recommended that each certificate have unique subject information. Add Edit Remove Object Reference
#
Name Type Subject NWA / WAC Series Users Guide 135 Chapter 13 Certificates Table 63 Configuration > Object > Certificate > My Certificates (continued) LABEL Issuer DESCRIPTION This field displays identifying information about the certificates issuing certification authority, such as a common name, organizational unit or department, organization or company and country. With self-signed certificates, this is the same information as in the Subject field. This field displays the date that the certificate becomes applicable. This field displays the date that the certificate expires. The text displays in red and includes an Expired! message if the certificate has expired. Click Import to open a screen where you can save a certificate to the NWA/WAC. Click Refresh to display the current validity status of the certificates. Valid From Valid To Import Refresh 13.2.1 Add My Certificates Click Configuration > Object > Certificate > My Certificates and then the Add icon to open the Add My Certificates screen. Use this screen to have the NWA/WAC create a self-signed certificate, enroll a certificate with a certification authority or generate a certification request. Figure 85 Configuration > Object > Certificate > My Certificates > Add NWA / WAC Series Users Guide 136 Chapter 13 Certificates The following table describes the labels in this screen. Table 64 Configuration > Object > Certificate > My Certificates > Add LABEL Name Subject Information Organizational Unit Organization Town (City) State (Province) Country Key Type Key Length Extended Key Usage Create a self-signed certificate Create a certification request and save it locally for later manual enrollment DESCRIPTION Type a name to identify this certificate. You can use up to 31 alphanumeric and
;~!@#$%^&()_+[]{},.=- characters. Use these fields to record information that identifies the owner of the certificate. You do not have to fill in every field, although you must specify a Host IP Address, Host Domain Name, or E-Mail. The certification authority may add fields (such as a serial number) to the subject information when it issues a certificate. It is recommended that each certificate have unique subject information. Select a radio button to identify the certificates owner by IP address, domain name or e-
mail address. Type the IP address (in dotted decimal notation), domain name or e-mail address in the field provided. The domain name or e-mail address is for identification purposes only and can be any string. A domain name can be up to 255 characters. You can use alphanumeric characters, the hyphen and periods. An e-mail address can be up to 63 characters. You can use alphanumeric characters, the hyphen, the @ symbol, periods and the underscore. Identify the organizational unit or department to which the certificate owner belongs. You can use up to 31 characters. You can use alphanumeric characters, the hyphen and the underscore. Identify the company or group to which the certificate owner belongs. You can use up to 31 characters. You can use alphanumeric characters, the hyphen and the underscore. Identify the town or city where the certificate owner is located. You can use up to 31 characters. You can use alphanumeric characters, the hyphen and the underscore. Identify the state or province where the certificate owner is located. You can use up to 31 characters. You can use alphanumeric characters, the hyphen and the underscore. Identify the nation where the certificate owner is located. You can use up to 31 characters. You can use alphanumeric characters, the hyphen and the underscore. The NWA/WAC uses the RSA (Rivest, Shamir and Adleman) public-key encryption algorithm. SHA1 (Secure Hash Algorithm) and SHA2 are hash algorithms used to authenticate packet data. SHA2-256 or SHA2-512 are part of the SHA2 set of cryptographic functions and they are considered even more secure than SHA1. Select a key type from RSA-SHA256 and RSA-SHA512. Select a number from the drop-down list box to determine how many bits the key should use (1024 to 2048). The longer the key, the more secure it is. A longer key also uses more PKI storage space. Select Server Authentication to allow a web server to send clients the certificate to authenticate itself. Select Client Authentication to use the certificates key to authenticate clients to the secure gateway. These radio buttons deal with how and when the certificate is to be generated. Select this to have the NWA/WAC generate the certificate and act as the Certification Authority (CA) itself. This way you do not need to apply to a certification authority for certificates. Select this to have the NWA/WAC generate and store a request for a certificate. Use the My Certificate Edit screen to view the certification request and copy it to send to the certification authority. Copy the certification request from the My Certificate Edit screen and then send it to the certification authority. NWA / WAC Series Users Guide 137 Chapter 13 Certificates Table 64 Configuration > Object > Certificate > My Certificates > Add (continued) LABEL Create a certification request and enroll for a certificate immediately online DESCRIPTION Select this to have the NWA/WAC generate a request for a certificate and apply to a certification authority for a certificate. You must have the certification authoritys certificate already imported in the Trusted Certificates screen. When you select this option, you must select the certification authoritys enrollment protocol and the certification authoritys certificate from the drop-down list boxes and enter the certification authoritys server address. You also need to fill in the Reference Number and Key if the certification authority requires them. This field applies when you select Create a certification request and enroll for a certificate immediately online. Select the certification authoritys enrollment protocol from the drop-
down list box. Simple Certificate Enrollment Protocol (SCEP) is a TCP-based enrollment protocol that was developed by VeriSign and Cisco. Certificate Management Protocol (CMP) is a TCP-based enrollment protocol that was developed by the Public Key Infrastructure X.509 working group of the Internet Engineering Task Force (IETF) and is specified in RFC 2510. This field applies when you select Create a certification request and enroll for a certificate immediately online. Enter the IP address (or URL) of the certification authority server. For a URL, you can use up to 511 of the following characters. a-zA-Z0-9'()+,/:.=?;!*#@$_%-
This field applies when you select Create a certification request and enroll for a certificate immediately online. Select the certification authoritys certificate from the CA Certificate drop-down list box. You must have the certification authoritys certificate already imported in the Trusted Certificates screen. Click Trusted CAs to go to the Trusted Certificates screen where you can view (and manage) the NWA/WAC's list of certificates of trusted certification authorities. When you select Create a certification request and enroll for a certificate immediately online, the certification authority may want you to include a reference number and key to identify you when you send a certification request. Fill in both the Reference Number and the Key fields if your certification authority uses the CMP enrollment protocol. Just the Key field displays if your certification authority uses the SCEP enrollment protocol. For the reference number, use 0 to 99999999. For the key, use up to 31 of the following characters. a-zA-Z0-9;|`~!@#$%^&*()_+\{}':,./
<>=-
Click OK to begin certificate or certification request generation. Click Cancel to quit and return to the My Certificates screen. Enrollment Protocol CA Server Address CA Certificate Request Authentication OK Cancel If you configured the Add My Certificates screen to have the NWA/WAC enroll a certificate and the certificate enrollment is not successful, you see a screen with a Return button that takes you back to the Add My Certificates screen. Click Return and check your information in the Add My Certificates screen. Make sure that the certification authority information is correct and that your Internet connection is working properly if you want the NWA/WAC to enroll a certificate online. 13.2.2 Edit My Certificates Click Configuration > Object > Certificate > My Certificates and then the Edit icon to open the My Certificate Edit screen. You can use this screen to view in-depth certificate information and change the certificates name. NWA / WAC Series Users Guide 138 Chapter 13 Certificates Figure 86 Configuration > Object > Certificate > My Certificates > Edit NWA / WAC Series Users Guide 139 Chapter 13 Certificates The following table describes the labels in this screen. Table 65 Configuration > Object > Certificate > My Certificates > Edit LABEL Name DESCRIPTION This field displays the identifying name of this certificate. You can use up to 31 alphanumeric and ;~!@#$%^&()_+[]{},.=- characters. This field displays for a certificate, not a certification request. Click the Refresh button to have this read-only text box display the hierarchy of certification authorities that validate the certificate (and the certificate itself). Certification Path Refresh Certificate Information Type Version Serial Number Subject Issuer Valid To Key Algorithm Subject Alternative Name Key Usage Basic Constraint If the issuing certification authority is one that you have imported as a trusted certification authority, it may be the only certification authority in the list (along with the certificate itself). If the certificate is a self-signed certificate, the certificate itself is the only one in the list. The NWA/WAC does not trust the certificate and displays Not trusted in this field if any certificate on the path has expired or been revoked. Click Refresh to display the certification path. These read-only fields display detailed information about the certificate. This field displays general information about the certificate. CA-signed means that a Certification Authority signed the certificate. Self-signed means that the certificates owner signed the certificate (not a certification authority). X.509 means that this certificate was created and signed according to the ITU-T X.509 recommendation that defines the formats for public-key certificates. This field displays the X.509 version number. This field displays the certificates identification number given by the certification authority or generated by the NWA/WAC. This field displays information that identifies the owner of the certificate, such as Common Name (CN), Organizational Unit (OU), Organization (O), State (ST), and Country (C). This field displays identifying information about the certificates issuing certification authority, such as Common Name, Organizational Unit, Organization and Country. With self-signed certificates, this is the same as the Subject Name field. none displays for a certification request. This field displays the date that the certificate becomes applicable. none displays for a certification request. This field displays the date that the certificate expires. The text displays in red and includes an Expired! message if the certificate has expired. none displays for a certification request. This field displays the type of algorithm that was used to generate the certificates key pair
(the NWA/WAC uses RSA encryption) and the length of the key set in bits (1024 bits for example). This field displays the certificate owners IP address (IP), domain name (DNS) or e-mail address (EMAIL). This field displays for what functions the certificates key can be used. For example, DigitalSignature means that the key can be used to sign certificates and KeyEncipherment means that the key can be used to encrypt text. Signature Algorithm This field displays the type of algorithm that was used to sign the certificate. Valid From Extended Key Usage This field displays for what EKU (Extended Key Usage) functions the certificates key can be used. This field displays general information about the certificate. For example, Subject Type=CA means that this is a certification authoritys certificate and Path Length Constraint=1 means that there can only be one certification authority in the certificates path. This field does not display for a certification request. NWA / WAC Series Users Guide 140 Chapter 13 Certificates Table 65 Configuration > Object > Certificate > My Certificates > Edit LABEL MD5 Fingerprint DESCRIPTION This is the certificates message digest that the NWA/WAC calculated using the MD5 algorithm. This is the certificates message digest that the NWA/WAC calculated using the SHA1 algorithm. This read-only text box displays the certificate or certification request in Privacy Enhanced Mail (PEM) format. PEM uses lowercase letters, uppercase letters and numerals to convert a binary certificate into a printable form. You can copy and paste a certification request into a certification authoritys web page, an e-mail that you send to the certification authority or a text editor and save the file on a management computer for later manual enrollment. You can copy and paste a certificate into an e-mail to send to friends or colleagues or you can copy and paste a certificate into a text editor and save the file on a management computer for later distribution (via floppy disk for example). Use this button to save a copy of the certificate without its private key. Click this button and then Save in the File Download screen. The Save As screen opens, browse to the location that you want to use and click Save. If you want to export the certificate with its private key, create a password and type it here. Make sure you keep this password in a safe place. You will need to use it if you import the certificate to another device. Use this button to save a copy of the certificate with its private key. Type the certificates password and click this button. Click Save in the File Download screen. The Save As screen opens, browse to the location that you want to use and click Save. Click OK to save your changes back to the NWA/WAC. You can only change the name. Click Cancel to quit and return to the My Certificates screen. SHA1 Fingerprint Certificate in PEM
(Base-64) Encoded Format Export Certificate Only Password Export Certificate with Private Key OK Cancel 13.2.3 Import Certificates Click Configuration > Object > Certificate > My Certificates > Import to open the My Certificate Import screen. Follow the instructions in this screen to save an existing certificate to the NWA/WAC. Note: You can import a certificate that matches a corresponding certification request that was generated by the NWA/WAC. You can also import a certificate in PKCS#12 format, including the certificates public and private keys. The certificate you import replaces the corresponding request in the My Certificates screen. You must remove any spaces in the certificates filename before you can import it. NWA / WAC Series Users Guide 141 Chapter 13 Certificates Figure 87 Configuration > Object > Certificate > My Certificates > Import The following table describes the labels in this screen. Table 66 Configuration > Object > Certificate > My Certificates > Import LABEL File Path DESCRIPTION Type in the location of the file you want to upload in this field or click Browse to find it. Browse Password OK Cancel You cannot import a certificate with the same name as a certificate that is already in the NWA/WAC. Click Browse to find the certificate file you want to upload. This field only applies when you import a binary PKCS#12 format file. Type the files password that was created when the PKCS #12 file was exported. Click OK to save the certificate on the NWA/WAC. Click Cancel to quit and return to the My Certificates screen. 13.3 Trusted Certificates Click Configuration > Object > Certificate > Trusted Certificates to open the Trusted Certificates screen. This screen displays a summary list of certificates that you have set the NWA/WAC to accept as trusted. The NWA/WAC also accepts any valid certificate signed by a certificate on this list as being trustworthy;
thus you do not need to import any certificate that is signed by one of these certificates. NWA / WAC Series Users Guide 142 Chapter 13 Certificates Figure 88 Configuration > Object > Certificate > Trusted Certificates The following table describes the labels in this screen. Table 67 Configuration > Object > Certificate > Trusted Certificates LABEL PKI Storage Space in Use DESCRIPTION This bar displays the percentage of the NWA/WACs PKI storage space that is currently in use. When the storage space is almost full, you should consider deleting expired or unnecessary certificates before adding more certificates. Double-click an entry or select it and click Edit to open a screen with an in-depth list of information about the certificate. The NWA/WAC keeps all of your certificates unless you specifically delete them. Uploading a new firmware or default configuration file does not delete your certificates. To remove an entry, select it and click Remove. The NWA/WAC confirms you want to remove it before doing so. Subsequent certificates move up by one when you take this action. You cannot delete certificates that any of the NWA/WACs features are configured to use. Select an entry and click Object Reference to open a screen that shows which settings use the entry. This field displays the certificate index number. The certificates are listed in alphabetical order. This field displays the name used to identify this certificate. This field displays identifying information about the certificates owner, such as CN (Common Name), OU (Organizational Unit or department), O (Organization or company) and C
(Country). It is recommended that each certificate have unique subject information. This field displays identifying information about the certificates issuing certification authority, such as a common name, organizational unit or department, organization or company and country. With self-signed certificates, this is the same information as in the Subject field. This field displays the date that the certificate becomes applicable. This field displays the date that the certificate expires. The text displays in red and includes an Expired! message if the certificate has expired. Click Import to open a screen where you can save the certificate of a certification authority that you trust, from your computer to the NWA/WAC. Click this button to display the current validity status of the certificates. Edit Remove Object Reference
#
Name Subject Issuer Valid From Valid To Import Refresh 13.3.1 Edit Trusted Certificates Click Configuration > Object > Certificate > Trusted Certificates and then a certificates Edit icon to open the Trusted Certificates Edit screen. Use this screen to view in-depth information about the certificate, change the certificates name and set whether or not you want the NWA/WAC to check a certification authoritys list of revoked certificates before trusting a certificate issued by the certification authority. NWA / WAC Series Users Guide 143 Chapter 13 Certificates Figure 89 Configuration > Object > Certificate > Trusted Certificates > Edit NWA / WAC Series Users Guide 144 Chapter 13 Certificates The following table describes the labels in this screen. Table 68 Configuration > Object > Certificate > Trusted Certificates > Edit LABEL Name Certification Path Refresh Enable X.509v3 CRL Distribution Points and OCSP checking OCSP Server URL ID Password LDAP Server Address Port ID Password Certificate Information Type Version Serial Number Subject Issuer DESCRIPTION This field displays the identifying name of this certificate. You can change the name. You can use up to 31 alphanumeric and ;~!@#$%^&()_+[]{},.=- characters. Click the Refresh button to have this read-only text box display the end entitys certificate and a list of certification authority certificates that shows the hierarchy of certification authorities that validate the end entitys certificate. If the issuing certification authority is one that you have imported as a trusted certificate, it may be the only certification authority in the list (along with the end entitys own certificate). The NWA/WAC does not trust the end entitys certificate and displays Not trusted in this field if any certificate on the path has expired or been revoked. Click Refresh to display the certification path. Select this check box to have the NWA/WAC check incoming certificates that are signed by this certificate against a Certificate Revocation List (CRL) or an OCSP server. You also need to configure the OSCP or LDAP server details. Select this check box if the directory server uses OCSP (Online Certificate Status Protocol). Type the protocol, IP address and pathname of the OCSP server. The NWA/WAC may need to authenticate itself in order to assess the OCSP server. Type the login name (up to 31 ASCII characters) from the entity maintaining the server (usually a certification authority). Type the password (up to 31 ASCII characters) from the entity maintaining the OCSP server
(usually a certification authority). Select this check box if the directory server uses LDAP (Lightweight Directory Access Protocol). LDAP is a protocol over TCP that specifies how clients access directories of certificates and lists of revoked certificates. Type the IP address (in dotted decimal notation) of the directory server. Use this field to specify the LDAP server port number. You must use the same server port number that the directory server uses. 389 is the default server port number for LDAP. The NWA/WAC may need to authenticate itself in order to assess the CRL directory server. Type the login name (up to 31 ASCII characters) from the entity maintaining the server
(usually a certification authority). Type the password (up to 31 ASCII characters) from the entity maintaining the CRL directory server (usually a certification authority). These read-only fields display detailed information about the certificate. This field displays general information about the certificate. CA-signed means that a Certification Authority signed the certificate. Self-signed means that the certificates owner signed the certificate (not a certification authority). X.509 means that this certificate was created and signed according to the ITU-T X.509 recommendation that defines the formats for public-key certificates. This field displays the X.509 version number. This field displays the certificates identification number given by the certification authority. This field displays information that identifies the owner of the certificate, such as Common Name (CN), Organizational Unit (OU), Organization (O) and Country (C). This field displays identifying information about the certificates issuing certification authority, such as Common Name, Organizational Unit, Organization and Country. With self-signed certificates, this is the same information as in the Subject Name field. Signature Algorithm This field displays the type of algorithm that was used to sign the certificate. Some certification authorities use rsa-pkcs1-sha1 (RSA public-private key encryption algorithm and the SHA1 hash algorithm). Other certification authorities may use rsa-pkcs1-md5 (RSA public-private key encryption algorithm and the MD5 hash algorithm). NWA / WAC Series Users Guide 145 Chapter 13 Certificates Table 68 Configuration > Object > Certificate > Trusted Certificates > Edit (continued) LABEL Valid From Valid To Key Algorithm Subject Alternative Name Key Usage Basic Constraint MD5 Fingerprint SHA1 Fingerprint Certificate DESCRIPTION This field displays the date that the certificate becomes applicable. The text displays in red and includes a Not Yet Valid! message if the certificate has not yet become applicable. This field displays the date that the certificate expires. The text displays in red and includes an Expiring! or Expired! message if the certificate is about to expire or has already expired. This field displays the type of algorithm that was used to generate the certificates key pair
(the NWA/WAC uses RSA encryption) and the length of the key set in bits (1024 bits for example). This field displays the certificates owners IP address (IP), domain name (DNS) or e-mail address (EMAIL). This field displays for what functions the certificates key can be used. For example, DigitalSignature means that the key can be used to sign certificates and KeyEncipherment means that the key can be used to encrypt text. This field displays general information about the certificate. For example, Subject Type=CA means that this is a certification authoritys certificate and Path Length Constraint=1 means that there can only be one certification authority in the certificates path. This is the certificates message digest that the NWA/WAC calculated using the MD5 algorithm. You can use this value to verify with the certification authority (over the phone for example) that this is actually their certificate. This is the certificates message digest that the NWA/WAC calculated using the SHA1 algorithm. You can use this value to verify with the certification authority (over the phone for example) that this is actually their certificate. This read-only text box displays the certificate or certification request in Privacy Enhanced Mail (PEM) format. PEM uses lowercase letters, uppercase letters and numerals to convert a binary certificate into a printable form. You can copy and paste the certificate into an e-mail to send to friends or colleagues or you can copy and paste the certificate into a text editor and save the file on a management computer for later distribution (via floppy disk for example). Click this button and then Save in the File Download screen. The Save As screen opens, browse to the location that you want to use and click Save. Click OK to save your changes back to the NWA/WAC. You can only change the name. Click Cancel to quit and return to the Trusted Certificates screen. Export Certificate OK Cancel 13.3.2 Import Trusted Certificates Click Configuration > Object > Certificate > Trusted Certificates > Import to open the Import Trusted Certificates screen. Follow the instructions in this screen to save a trusted certificate to the NWA/WAC. Note: You must remove any spaces from the certificates filename before you can import the certificate. NWA / WAC Series Users Guide 146 Chapter 13 Certificates Figure 90 Configuration > Object > Certificate > Trusted Certificates > Import The following table describes the labels in this screen. Table 69 Configuration > Object > Certificate > Trusted Certificates > Import LABEL File Path DESCRIPTION Type in the location of the file you want to upload in this field or click Browse to find it. You cannot import a certificate with the same name as a certificate that is already in the NWA/
WAC. Click Browse to find the certificate file you want to upload. Click OK to save the certificate on the NWA/WAC. Click Cancel to quit and return to the previous screen. Browse OK Cancel 13.4 Technical Reference The following section contains additional technical information about the features described in this chapter. OCSP OCSP (Online Certificate Status Protocol) allows an application or device to check whether a certificate is valid. With OCSP the NWA/WAC checks the status of individual certificates instead of downloading a Certificate Revocation List (CRL). OCSP has two main advantages over a CRL. The first is real-time status information. The second is a reduction in network traffic since the NWA/WAC only gets information on the certificates that it needs to verify, not a huge list. When the NWA/WAC requests certificate status information, the OCSP server returns a expired, current or unknown response. NWA / WAC Series Users Guide 147 CHAPTER 14 System 14.1 Overview Use the system screens to configure general NWA/WAC settings. 14.1.1 What You Can Do in this Chapter The Host Name screen (Section 14.2 on page 148) configures a unique name for the NWA/WAC in your network. The Date/Time screen (Section 14.3 on page 149) configures the date and time for the NWA/WAC. The WWW screens (Section 14.4 on page 153) configure settings for HTTP or HTTPS access to the NWA/
WAC. The SSH screen (Section 14.5 on page 163) configures SSH (Secure SHell) for securely accessing the NWA/WACs command line interface. The Telnet screen (Section 14.6 on page 167) configures Telnet for accessing the NWA/WACs command line interface. The FTP screen (Section 14.7 on page 167) specifies FTP server settings. You can upload and download the NWA/WACs firmware and configuration files using FTP. Please also see Chapter 16 on page 185 for more information about firmware and configuration files. The SNMP screens (Section 14.8 on page 168) configure the devices SNMP settings, including profiles that define allowed SNMPv3 access. 14.2 Host Name A host name is the unique name by which a device is known on a network. Click Configuration > System
> Host Name to open this screen. Figure 91 Configuration > System > Host Name NWA / WAC Series Users Guide 148 Chapter 14 System The following table describes the labels in this screen. Table 70 Configuration > System > Host Name LABEL System Name DESCRIPTION Choose a descriptive name to identify your NWA/WAC device. This name can be up to 64 alphanumeric characters long. Spaces are not allowed, but dashes (-) underscores (_) and periods (.) are accepted. Specify the name of the place where the NWA/WAC is located. You can enter up to 60 alphanumeric and '() ,:;?! +-*/= #$%@ characters. Spaces and underscores are allowed. The name should start with a letter. Enter the domain name (if you know it) here. This name is propagated to DHCP clients connected to interfaces with the DHCP server enabled. This name can be up to 254 alphanumeric characters long. Spaces are not allowed, but dashes - are accepted. Click Apply to save your changes back to the NWA/WAC. Click Reset to return the screen to its last-saved settings. System Location Domain Name Apply Reset 14.3 Date and Time For effective scheduling and logging, the NWA/WAC system time must be accurate. The NWA/WAC has a software mechanism to set the time manually or get the current time and date from an external server. To change your NWA/WACs time based on your local time zone and date, click Configuration > System
> Date/Time. The screen displays as shown. You can manually set the NWA/WACs time and date or have the NWA/WAC get the date and time from a time server. NWA / WAC Series Users Guide 149 Chapter 14 System Figure 92 Configuration > System > Date/Time The following table describes the labels in this screen. DESCRIPTION Table 71 Configuration > System > Date/Time LABEL Current Time and Date Current Time Current Date Time and Date Setup Manual This field displays the present time of your NWA/WAC. This field displays the present date of your NWA/WAC. New Time
(hh:mm:ss) New Date
(yyyy-mm-dd) Select this radio button to enter the time and date manually. If you configure a new time and date, time zone and daylight saving at the same time, the time zone and daylight saving will affect the new time and date you entered. When you enter the time settings manually, the NWA/WAC uses the new setting once you click Apply. This field displays the last updated time from the time server or the last time configured manually. When you set Time and Date Setup to Manual, enter the new time in this field and then click Apply. This field displays the last updated date from the time server or the last date configured manually. When you set Time and Date Setup to Manual, enter the new date in this field and then click Apply. NWA / WAC Series Users Guide 150 Chapter 14 System Table 71 Configuration > System > Date/Time (continued) LABEL Get from Time Server DESCRIPTION Select this radio button to have the NWA/WAC get the time and date from the time server you specify below. The NWA/WAC requests time and date settings from the time server under the following circumstances. When the NWA/WAC starts up. When you click Apply or Sync. Now in this screen. 24-hour intervals after starting up. Enter the IP address or URL of your time server. Check with your ISP/network administrator if you are unsure of this information. Click this button to have the NWA/WAC get the time and date from a time server (see the Time Server Address field). This also saves your changes (except the daylight saving settings). Choose the time zone of your location. This will set the time difference between your time zone and Greenwich Mean Time (GMT). Daylight saving is a period from late spring to fall when many countries set their clocks ahead of normal local time by one hour to give more daytime light in the evening. Select this option if you use Daylight Saving Time. Configure the day and time when Daylight Saving Time starts if you selected Enable Daylight Saving. The at field uses the 24 hour format. Here are a couple of examples:
Daylight Saving Time starts in most parts of the United States on the second Sunday of March. Each time zone in the United States starts using Daylight Saving Time at 2 A.M. local time. So in the United States you would select Second, Sunday, March and type 2 in the at field. Daylight Saving Time starts in the European Union on the last Sunday of March. All of the time zones in the European Union start using Daylight Saving Time at the same moment (1 A.M. GMT or UTC). So in the European Union you would select Last, Sunday, March. The time you type in the at field depends on your time zone. In Germany for instance, you would type 2 because Germany's time zone is one hour ahead of GMT or UTC (GMT+1). Configure the day and time when Daylight Saving Time ends if you selected Enable Daylight Saving. The at field uses the 24 hour format. Here are a couple of examples:
Daylight Saving Time ends in the United States on the first Sunday of November. Each time zone in the United States stops using Daylight Saving Time at 2 A.M. local time. So in the United States you would select First, Sunday, November and type 2 in the at field. Daylight Saving Time ends in the European Union on the last Sunday of October. All of the time zones in the European Union stop using Daylight Saving Time at the same moment (1 A.M. GMT or UTC). So in the European Union you would select Last, Sunday, October. The time you type in the at field depends on your time zone. In Germany for instance, you would type 2 because Germany's time zone is one hour ahead of GMT or UTC (GMT+1). Specify how much the clock changes when daylight saving begins and ends. Enter a number from 1 to 5.5 (by 0.5 increments). For example, if you set this field to 3.5, a log occurred at 6 P.M. in local official time will appear as if it had occurred at 10:30 P.M. Click Apply to save your changes back to the NWA/WAC. Click Reset to return the screen to its last-saved settings. Time Server Address Sync. Now Time Zone Setup Time Zone Enable Daylight Saving Start Date End Date Offset Apply Reset NWA / WAC Series Users Guide 151 Chapter 14 System 14.3.1 Pre-defined NTP Time Servers List When you turn on the NWA/WAC for the first time, the date and time start at 2003-01-01 00:00:00. The NWA/WAC then attempts to synchronize with one of the following pre-defined list of Network Time Protocol (NTP) time servers. The NWA/WAC continues to use the following pre-defined list of NTP time servers if you do not specify a time server or it cannot synchronize with the time server you specified. Table 72 Default Time Servers 0.pool.ntp.org 1.pool.ntp.org 2.pool.ntp.org When the NWA/WAC uses the pre-defined list of NTP time servers, it randomly selects one server and tries to synchronize with it. If the synchronization fails, then the NWA/WAC goes through the rest of the list in order from the first one tried until either it is successful or all the pre-defined NTP time servers have been tried. 14.3.2 Time Server Synchronization Click the Sync. Now button to get the time and date from the time server you specified in the Time Server Address field. When the Loading message appears, you may have to wait up to one minute. Figure 93 Loading The Current Time and Current Date fields will display the appropriate settings if the synchronization is successful. If the synchronization was not successful, a log displays in the View Log screen. Try re-configuring the Date/Time screen. To manually set the NWA/WAC date and time:
1 Click System > Date/Time. 2 3 4 5 Select Manual under Time and Date Setup. Enter the NWA/WACs time in the New Time field. Enter the NWA/WACs date in the New Date field. Under Time Zone Setup, select your Time Zone from the list. 6 As an option you can select the Enable Daylight Saving check box to adjust the NWA/WAC clock for daylight savings. 7 Click Apply. NWA / WAC Series Users Guide 152 Chapter 14 System To get the NWA/WAC date and time from a time server:
1 Click System > Date/Time. 2 3 4 Select Get from Time Server under Time and Date Setup. Under Time Zone Setup, select your Time Zone from the list. Under Time and Date Setup, enter a Time Server Address. 5 Click Apply. 14.4 WWW Overview The following figure shows secure and insecure management of the NWA/WAC coming in from the WAN. HTTPS and SSH access are secure. HTTP, Telnet, and FTP management access are not secure. Figure 94 Secure and Insecure Service Access From the WAN 14.4.1 Service Access Limitations A service cannot be used to access the NWA/WAC when you have disabled that service in the corresponding screen. 14.4.2 System Timeout There is a lease timeout for administrators. The NWA/WAC automatically logs you out if the management session remains idle for longer than this timeout period. The management session does not time out when a statistics screen is polling. Each user is also forced to log in the NWA/WAC for authentication again when the reauthentication time expires. You can change the timeout settings in the User screens. NWA / WAC Series Users Guide 153 Chapter 14 System 14.4.3 HTTPS You can set the NWA/WAC to use HTTP or HTTPS (HTTPS adds security) for Web Configurator sessions. HTTPS (HyperText Transfer Protocol over Secure Socket Layer, or HTTP over SSL) is a web protocol that encrypts and decrypts web pages. Secure Socket Layer (SSL) is an application-level protocol that enables secure transactions of data by ensuring confidentiality (an unauthorized party cannot read the transferred data), authentication (one party can identify the other party) and data integrity (you know if data has been changed). It relies upon certificates, public keys, and private keys (see Chapter 13 on page 132 for more information). HTTPS on the NWA/WAC is used so that you can securely access the NWA/WAC using the Web Configurator. The SSL protocol specifies that the HTTPS server (the NWA/WAC) must always authenticate itself to the HTTPS client (the computer which requests the HTTPS connection with the NWA/WAC), whereas the HTTPS client only should authenticate itself when the HTTPS server requires it to do so (select Authenticate Client Certificates in the WWW screen). Authenticate Client Certificates is optional and if selected means the HTTPS client must send the NWA/WAC a certificate. You must apply for a certificate for the browser from a CA that is a trusted CA on the NWA/WAC. Please refer to the following figure. 1 2 HTTPS connection requests from an SSL-aware web browser go to port 443 (by default) on the NWA/
WACs web server. HTTP connection requests from a web browser go to port 80 (by default) on the NWA/WACs web server. Figure 95 HTTP/HTTPS Implementation Note: If you disable HTTP in the WWW screen, then the NWA/WAC blocks all HTTP connection attempts. 14.4.4 Configuring WWW Service Control Click Configuration > System > WWW to open the WWW screen. Use this screen to specify HTTP or HTTPS settings. NWA / WAC Series Users Guide 154 Chapter 14 System Figure 96 Configuration > System > WWW > Service Control The following table describes the labels in this screen. Table 73 Configuration > System > WWW > Service Control LABEL HTTPS Enable DESCRIPTION Select the check box to allow or disallow the computer with the IP address that matches the IP address(es) in the Service Control table to access the NWA/WAC Web Configurator using secure HTTPs connections. The HTTPS server listens on port 443 by default. If you change the HTTPS server port to a different number on the NWA/WAC, for example 8443, then you must notify people who need to access the NWA/WAC Web Configurator to use https://NWA/WAC IP Address:8443 as the URL. Select Authenticate Client Certificates (optional) to require the SSL client to authenticate itself to the NWA/WAC by sending the NWA/WAC a certificate. To do that the SSL client must have a CA-signed certificate from a CA that has been imported as a trusted CA on the NWA/WAC. Select a certificate the HTTPS server (the NWA/WAC) uses to authenticate itself to the HTTPS client. You must have certificates already configured in the My Certificates screen. To allow only secure Web Configurator access, select this to redirect all HTTP connection requests to the HTTPS server. Select the check box to allow or disallow the computer with the IP address that matches the IP address(es) in the Service Control table to access the NWA/WAC Web Configurator using HTTP connections. You may change the server port number for a service if needed, however you must use the same port number in order to use that service to access the NWA/WAC. Click Apply to save your changes back to the NWA/WAC. Click Reset to return the screen to its last-saved settings. Server Port Authenticate Client Certificates Server Certificate Redirect HTTP to HTTPS HTTP Enable Server Port Apply Reset 14.4.5 HTTPS Example If you havent changed the default HTTPS port on the NWA/WAC, then in your browser enter https://
NWA/WAC IP Address/ as the web site address where NWA/WAC IP Address is the IP address or domain name of the NWA/WAC you wish to access. NWA / WAC Series Users Guide 155 Chapter 14 System 14.4.5.1 Internet Explorer Warning Messages When you attempt to access the NWA/WAC HTTPS server, you will see the error message shown in the following screen. Figure 97 Security Alert Dialog Box (Internet Explorer) Select Continue to this website. to proceed to the Web Configurator login screen. Otherwise, select Click here to close this webpage. to block the access. 14.4.5.2 Mozilla Firefox Warning Messages When you attempt to access the NWA/WAC HTTPS server, a The Connection is Untrusted screen appears as shown in the following screen. Click Technical Details if you want to verify more information about the certificate from the NWA/WAC. Select I Understand the Risks and then click Add Exception to add the NWA/WAC to the security exception list. Click Confirm Security Exception. NWA / WAC Series Users Guide 156 Chapter 14 System Figure 98 Security Certificate 1 (Firefox) Figure 99 Security Certificate 2 (Firefox) 14.4.5.3 Avoiding Browser Warning Messages Here are the main reasons your browser displays warnings about the NWA/WACs HTTPS server certificate and what you can do to avoid seeing the warnings:
The issuing certificate authority of the NWA/WACs HTTPS server certificate is not one of the browsers trusted certificate authorities. The issuing certificate authority of the NWA/WAC's factory default certificate is the NWA/WAC itself since the certificate is a self-signed certificate. NWA / WAC Series Users Guide 157 Chapter 14 System For the browser to trust a self-signed certificate, import the self-signed certificate into your operating system as a trusted certificate. To have the browser trust the certificates issued by a certificate authority, import the certificate authoritys certificate into your operating system as a trusted certificate. Refer to Appendix A on page 214 for details. 14.4.5.4 Enrolling and Importing SSL Client Certificates The SSL client needs a certificate if Authenticate Client Certificates is selected on the NWA/WAC. You must have imported at least one trusted CA to the NWA/WAC in order for the Authenticate Client Certificates to be active (see the Certificates chapter for details). Apply for a certificate from a Certification Authority (CA) that is trusted by the NWA/WAC (see the NWA/WACs Trusted Certificates Web Configurator screen). Figure 100 Trusted Certificates The CA sends you a package containing the CAs trusted certificate(s), your personal certificate(s) and a password to install the personal certificate(s). NWA / WAC Series Users Guide 158 Chapter 14 System 14.4.5.5 Installing the CAs Certificate 1 Double click the CAs trusted certificate to produce a screen similar to the one shown next. 2 Click Install Certificate and follow the wizard as shown. 14.4.5.6 Installing a Personal Certificate You need a password in advance. The CA may issue the password or you may have to specify it during the enrollment. Double-click the personal certificate given to you by the CA to produce a screen similar to the one shown next. NWA / WAC Series Users Guide 159 Chapter 14 System 1 Click Next to begin the wizard. 2 The file name and path of the certificate you double-clicked should automatically appear in the File name text box. Click Browse if you wish to import a different certificate. NWA / WAC Series Users Guide 160 Chapter 14 System 3 Enter the password given to you by the CA. 4 Have the wizard determine where the certificate should be saved on your computer or select Place all certificates in the following store and choose a different location. NWA / WAC Series Users Guide 161 Chapter 14 System 5 Click Finish to complete the wizard and begin the import process. 6 You should see the following screen when the certificate is correctly installed on your computer. 14.4.5.7 Using a Certificate When Accessing the NWA/WAC To access the NWA/WAC via HTTPS:
1 Enter https://NWA/WAC IP Address/ in your browsers web address field. NWA / WAC Series Users Guide 162 Chapter 14 System 2 When Authenticate Client Certificates is selected on the NWA/WAC, the following screen asks you to select a personal certificate to send to the NWA/WAC. This screen displays even if you only have a single certificate as in the example. 3 You next see the Web Configurator login screen. 14.5 SSH You can use SSH (Secure SHell) to securely access the NWA/WACs command line interface. SSH is a secure communication protocol that combines authentication and data encryption to provide secure encrypted communication between two hosts over an unsecured network. In the following figure, computer B on the Internet uses SSH to securely connect to the NWA/WAC (A) for a management session. Figure 101 SSH Communication Over the WAN Example 14.5.1 How SSH Works The following figure is an example of how a secure connection is established between two remote hosts using SSH v1. NWA / WAC Series Users Guide 163 Chapter 14 System Figure 102 How SSH v1 Works Example 1 Host Identification The SSH client sends a connection request to the SSH server. The server identifies itself with a host key. The client encrypts a randomly generated session key with the host key and server key and sends the result back to the server. The client automatically saves any new server public keys. In subsequent connections, the server public key is checked against the saved version on the client computer. 2 Encryption Method Once the identification is verified, both the client and server must agree on the type of encryption method to use. 3 Authentication and Data Transmission After the identification is verified and data encryption activated, a secure tunnel is established between the client and the server. The client then sends its authentication information (user name and password) to the server to log in to the server. 14.5.2 SSH Implementation on the NWA/WAC Your NWA/WAC supports SSH versions 1 and 2 using RSA authentication and four encryption methods
(AES, 3DES, Archfour, and Blowfish). The SSH server is implemented on the NWA/WAC for management using port 22 (by default). NWA / WAC Series Users Guide 164 Chapter 14 System 14.5.3 Requirements for Using SSH You must install an SSH client program on a client computer (Windows or Linux operating system) that is used to connect to the NWA/WAC over SSH. 14.5.4 Configuring SSH Click Configuration > System > SSH to open the following screen. Use this screen to configure your NWA/
WACs Secure Shell settings. Note: It is recommended that you disable Telnet and FTP when you configure SSH for secure connections. Figure 103 Configuration > System > SSH The following table describes the labels in this screen. Table 74 Configuration > System > SSH LABEL Enable DESCRIPTION Select the check box to allow or disallow the computer with the IP address that matches the IP address(es) in the Service Control table to access the NWA/WAC CLI using this service. Select the check box to have the NWA/WAC use both SSH version 1 and version 2 protocols. If you clear the check box, the NWA/WAC uses only SSH version 2 protocol. You may change the server port number for a service if needed, however you must use the same port number in order to use that service for remote management. Server Certificate Select the certificate whose corresponding private key is to be used to identify the NWA/WAC for SSH connections. You must have certificates already configured in the My Certificates screen. Click Apply to save your changes back to the NWA/WAC. Click Reset to return the screen to its last-saved settings. Version 1 Server Port Apply Reset 14.5.5 Examples of Secure Telnet Using SSH This section shows two examples using a command interface and a graphical interface SSH client program to remotely access the NWA/WAC. The configuration and connection steps are similar for most SSH client programs. Refer to your SSH client program users guide. 14.5.5.1 Example 1: Microsoft Windows This section describes how to access the NWA/WAC using the Secure Shell Client program. NWA / WAC Series Users Guide 165 Chapter 14 System 1 Launch the SSH client and specify the connection information (IP address, port number) for the NWA/
WAC. 2 Configure the SSH client to accept connection using SSH version 1. 3 A window displays prompting you to store the host key in you computer. Click Yes to continue. Figure 104 SSH Example 1: Store Host Key Enter the password to log in to the NWA/WAC. The CLI screen displays next. 14.5.5.2 Example 2: Linux This section describes how to access the NWA/WAC using the OpenSSH client program that comes with most Linux distributions. 1 Test whether the SSH service is available on the NWA/WAC. Enter telnet 192.168.1.2 22 at a terminal prompt and press [ENTER]. The computer attempts to connect to port 22 on the NWA/WAC (using the default IP address of 192.168.1.2). A message displays indicating the SSH protocol version supported by the NWA/WAC. Figure 105 SSH Example 2: Test
$ telnet 192.168.1.2 22 Trying 192.168.1.2... Connected to 192.168.1.2. Escape character is '^]'. SSH-1.5-1.0.0 2 Enter ssh 1 192.168.1.2. This command forces your computer to connect to the NWA/WAC using SSH version 1. If this is the first time you are connecting to the NWA/WAC using SSH, a message displays prompting you to save the host information of the NWA/WAC. Type yes and press [ENTER]. Then enter the password to log in to the NWA/WAC. Figure 106 SSH Example 2: Log in
$ ssh 1 192.168.1.2 The authenticity of host '192.168.1.2 (192.168.1.2)' can't be established. RSA1 key fingerprint is 21:6c:07:25:7e:f4:75:80:ec:af:bd:d4:3d:80:53:d1. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '192.168.1.2' (RSA1) to the list of known hosts. Administrator@192.168.1.2's password:
NWA / WAC Series Users Guide 166 Chapter 14 System 3 The CLI screen displays next. 14.6 Telnet You can use Telnet to access the NWA/WACs command line interface. Click Configuration > System >
TELNET to configure your NWA/WAC for remote Telnet access. Use this screen to enable or disable Telnet and set the server port number. Figure 107 Configuration > System > TELNET The following table describes the labels in this screen. Table 75 Configuration > System > TELNET LABEL Enable DESCRIPTION Select the check box to allow or disallow the computer with the IP address that matches the IP address(es) in the Service Control table to access the NWA/WAC CLI using this service. You may change the server port number for a service if needed, however you must use the same port number in order to use that service for remote management. Click Apply to save your changes back to the NWA/WAC. Click Reset to return the screen to its last-saved settings. Server Port Apply Reset 14.7 FTP You can upload and download the NWA/WACs firmware and configuration files using FTP. To use this feature, your computer must have an FTP client. See Chapter 16 on page 185 for more information about firmware and configuration files. To change your NWA/WACs FTP settings, click Configuration > System > FTP tab. The screen appears as shown. Use this screen to specify FTP settings. NWA / WAC Series Users Guide 167 Chapter 14 System Figure 108 Configuration > System > FTP The following table describes the labels in this screen. Table 76 Configuration > System > FTP LABEL Enable DESCRIPTION Select the check box to allow or disallow the computer with the IP address that matches the IP address(es) in the Service Control table to access the NWA/WAC using this service. Select the check box to use FTP over TLS (Transport Layer Security) to encrypt communication. This implements TLS as a security mechanism to secure FTP clients and/or servers. You may change the server port number for a service if needed, however you must use the same port number in order to use that service for remote management. TLS required Server Port Server Certificate Select the certificate whose corresponding private key is to be used to identify the NWA/WAC for FTP connections. You must have certificates already configured in the My Certificates screen. Click Apply to save your changes back to the NWA/WAC. Click Reset to return the screen to its last-saved settings. Apply Reset 14.8 SNMP Simple Network Management Protocol is a protocol used for exchanging management information between network devices. Your NWA/WAC supports SNMP agent functionality, which allows a manager station to manage and monitor the NWA/WAC through the network. The NWA/WAC supports SNMP version one (SNMPv1), version two (SNMPv2c), and version three (SNMPv3). The next figure illustrates an SNMP management operation. NWA / WAC Series Users Guide 168 Chapter 14 System Figure 109 SNMP Management Model An SNMP managed network consists of two main types of component: agents and a manager. An agent is a management software module that resides in a managed device (the NWA/WAC). An agent translates the local management information from the managed device into a form compatible with SNMP. The manager is the console through which network administrators perform network management functions. It executes applications that control and monitor managed devices. The managed devices contain object variables/managed objects that define each piece of information to be collected about a device. Examples of variables include such as number of packets received, node port status etc. A Management Information Base (MIB) is a collection of managed objects. SNMP allows a manager and agents to communicate for the purpose of accessing these objects. SNMP itself is a simple request/response protocol based on the manager/agent model. The manager issues a request and the agent returns responses using the following protocol operations:
Get - Allows the manager to retrieve an object variable from the agent. GetNext - Allows the manager to retrieve the next object variable from a table or list within an agent. In SNMPv1, when a manager wants to retrieve all elements of a table from an agent, it initiates a Get operation, followed by a series of GetNext operations. Set - Allows the manager to set values for object variables within an agent. Trap - Used by the agent to inform the manager of some events. 14.8.1 Supported MIBs The NWA/WAC supports MIB II that is defined in RFC-1213 and RFC-1215. The NWA/WAC also supports private MIBs (ZYXEL-ES-CAPWAP.MIB, ZYXEL-ES-COMMON.MIB, ZYXEL-ES-ZyXELAPMgmt.MIB, ZYXEL-ES-
PROWLAN.MIB, ZYXEL-ES-RFMGMT.MIB, ZYXEL-ES-SMI.MIB, and ZYXEL-ES-WIRELESS.MIB) to collect information about CPU and memory usage and VPN total throughput. The focus of the MIBs is to let NWA / WAC Series Users Guide 169 Chapter 14 System administrators collect statistical data and monitor status and performance. You can download the NWA/WACs MIBs from www.zyxel.com. 14.8.2 SNMP Traps The NWA/WAC will send traps to the SNMP manager when any one of the following events occurs. Table 77 SNMP Traps OBJECT LABEL linkDown linkUp authenticationFailure OBJECT ID 1.3.6.1.6.3.1.1.5.3 1.3.6.1.6.3.1.1.5.4 1.3.6.1.6.3.1.1.5.5 DESCRIPTION This trap is sent when the Ethernet link is down. This trap is sent when the Ethernet link is up. This trap is sent when an SNMP request comes from non-
authenticated hosts. 14.8.3 Configuring SNMP To change your NWA/WACs SNMP settings, click Configuration > System > SNMP tab. The screen appears as shown. Use this screen to configure your SNMP settings. You can also configure user profiles that define allowed SNMPv3 access. Figure 110 Configuration > System > SNMP The following table describes the labels in this screen. Table 78 Configuration > System > SNMP LABEL Enable Server Port DESCRIPTION Select the check box to allow or disallow users to access the NWA/WAC using SNMP. You may change the server port number for a service if needed, however you must use the same port number in order to use that service for remote management. Trap NWA / WAC Series Users Guide 170 Chapter 14 System Table 78 Configuration > System > SNMP (continued) LABEL Community DESCRIPTION Type the trap community, which is the password sent with each trap to the SNMP manager. The default is public and allows all requests. Type the IP address of the station to send your SNMP traps to. Select this to have the NWA/WAC send a trap to the SNMP manager when a wireless client is connected to or disconnected from the NWA/WAC. Select this to allow SNMP managers using SNMPv2c to access the NWA/WAC. Enter the Get Community, which is the password for the incoming Get and GetNext requests from the management station. The default is public and allows all requests. Enter the Set community, which is the password for incoming Set requests from the management station. The default is private and allows all requests. Select this to allow SNMP managers using SNMPv3 to access the NWA/WAC. Click this to create a new entry. Select an entry and click Add to create a new entry after the selected entry. Double-click an entry or select it and click Edit to be able to modify the entrys settings. To remove an entry, select it and click Remove. The NWA/WAC confirms you want to remove it before doing so. Note that subsequent entries move up by one when you take this action. This the index number of an SNMPv3 user profile. This is the name of the user for which this SNMPv3 user profile is configured. This field displays the type of authentication the SNMPv3 user must use to connect to the NWA/
WAC using this SNMPv3 user profile. This field displays the type of encryption the SNMPv3 user must use to connect to the NWA/
WAC using this SNMPv3 user profile. This field displays whether the SNMPv3 user can have read-only or read and write access to the NWA/WAC using this SNMPv3 user profile. Click Apply to save your changes back to the NWA/WAC. Click Reset to return the screen to its last-saved settings. Destination Trap Wireless Event SNMPv2c Get Community Set Community SNMPv3 Add Edit Remove
#
User Name Authentication Privacy Privilege Apply Reset 14.8.4 Adding or Editing an SNMPv3 User Profile This screen allows you to add or edit an SNMPv3 user profile. To access this screen, click the Configuration > System > SNMP screens Add button or select a SNMPv3 user profile from the list and click the Edit button. Figure 111 Configuration > System > SNMP > Add NWA / WAC Series Users Guide 171 Chapter 14 System The following table describes the labels in this screen. Table 79 Configuration > System > SNMP LABEL User Name Authentication DESCRIPTION Select the user name of the user account for which this SNMPv3 user profile is configured. Select the type of authentication the SNMPv3 user must use to connect to the NWA/WAC using this SNMPv3 user profile. Select MD5 to require the SNMPv3 users password be encrypted by MD5 for authentication. Select SHA to require the SNMPv3 users password be encrypted by SHA for authentication. Select the type of encryption the SNMPv3 user must use to connect to the NWA/WAC using this SNMPv3 user profile. Select NONE to not encrypt the SNMPv3 communications. Select DES to use DES to encrypt the SNMPv3 communications. Select AES to use AES to encrypt the SNMPv3 communications. Select whether the SNMPv3 user can have read-only or read and write access to the NWA/
WAC using this SNMPv3 user profile. Click OK to save your changes back to the NWA/WAC. Click Cancel to exit this screen without saving your changes. Privacy Privilege OK Cancel NWA / WAC Series Users Guide 172 CHAPTER 15 Log and Report 15.1 Overview Use the system screens to configure daily reporting and log settings. 15.1.1 What You Can Do In this Chapter The Email Daily Report screen (Section 15.2 on page 173) configures how and where to send daily reports and what reports to send. The Log Setting screens (Section 15.3 on page 175) specify which logs are e-mailed, where they are e-
mailed, and how often they are e-mailed. 15.2 Email Daily Report Use this screen to start or stop data collection and view various statistics about traffic passing through your NWA/WAC. Note: Data collection may decrease the NWA/WACs traffic throughput rate. Click Configuration > Log & Report > Email Daily Report to display the following screen. Configure this screen to have the NWA/WAC e-mail you system statistics every day. NWA / WAC Series Users Guide 173 Chapter 15 Log and Report Figure 112 Configuration > Log & Report > Email Daily Report The following table describes the labels in this screen. Table 80 Configuration > Log & Report > Email Daily Report LABEL Enable Email Daily Report Mail Server DESCRIPTION Select this to send reports by e-mail every day. Type the name or IP address of the outgoing SMTP server. NWA / WAC Series Users Guide 174 Chapter 15 Log and Report Table 80 Configuration > Log & Report > Email Daily Report (continued) LABEL SSL/TLS Encryption DESCRIPTION Select SSL/TLS to use Secure Sockets Layer (SSL) or Transport Layer Security (TLS) if you want encrypted communications between the mail server and the NWA/WAC. Select STARTTLS to upgrade a plain text connection to a secure connection using SSL/TLS. Select No to not encrypt the communications. Enter the same port number here as is on the mail server for mail traffic. Type the subject line for the outgoing e-mail. Select Append system name to add the NWA/
WACs system name to the subject. Select Append date time to add the NWA/WACs system date and time to the subject. Type the e-mail address from which the outgoing e-mail is delivered. This address is used in replies. Type the e-mail address (or addresses) to which the outgoing e-mail is delivered. Select this check box if it is necessary to provide a user name and password to the SMTP server. This box is effective when you select the SMTP Authentication check box. Type the user name to provide to the SMTP server when the log is e-mailed. This box is effective when you select the SMTP Authentication check box. Type the password to provide to the SMTP server when the log is e-mailed. Click this button to have the NWA/WAC send the daily e-mail report immediately. Select the time of day (hours and minutes) when the log is e-mailed. Use 24-hour notation. Select the information to include in the report. Select Reset counters after sending report successfully if you only want to see statistics for a 24 hour period. Click this to discard all report data and start all of the counters over at zero. Click Apply to save your changes back to the NWA/WAC. Click Reset to return the screen to its last-saved settings. Mail Server Port Mail Subject Mail From Mail To SMTP Authentication User Name Password Send Report Now Time for sending report Report Items Reset All Counters Apply Reset 15.3 Log Setting These screens control log messages and alerts. A log message stores the information for viewing (for example, in the Monitor > View Log screen) or regular e-mailing later, and an alert is e-mailed immediately. Usually, alerts are used for events that require more serious attention, such as system errors and attacks. The NWA/WAC provides a system log and supports e-mail profiles and remote syslog servers. The system log is available on the View Log screen, the e-mail profiles are used to mail log messages to the specified destinations, and the other four logs are stored on specified syslog servers. The Log Setting tab also controls what information is saved in each log. For the system log, you can also specify which log messages are e-mailed, where they are e-mailed, and how often they are e-mailed. For alerts, the Log Setting screen controls which events generate alerts and where alerts are e-mailed. The Log Setting screen provides a summary of all the settings. You can use the Edit Log Setting screen to maintain the detailed settings (such as log categories, e-mail addresses, server names, etc.) for any log. NWA / WAC Series Users Guide 175 Chapter 15 Log and Report Alternatively, if you want to edit what events is included in each log, you can also use the Active Log Summary screen to edit this information for all logs at the same time. 15.3.1 Log Setting Screen To access this screen, click Configuration > Log & Report > Log Setting. Figure 113 Configuration > Log & Report > Log Setting The following table describes the labels in this screen. Table 81 Configuration > Log & Report > Log Setting LABEL Edit DESCRIPTION Double-click an entry or select it and click Edit to open a screen where you can modify the entrys settings. To turn on an entry, select it and click Activate. To turn off an entry, select it and click Inactivate. This field is a sequential value, and it is not associated with a specific log. This field shows whether the log is active or not. This field displays the name of the log (system log or one of the remote servers). Activate Inactivate
#
Status Name NWA / WAC Series Users Guide 176 Chapter 15 Log and Report Table 81 Configuration > Log & Report > Log Setting (continued) LABEL Log Format DESCRIPTION This field displays the format of the log. Internal - system log; you can view the log on the View Log tab. VRPT/Syslog - Zyxels Vantage Report, syslog-compatible format. CEF/Syslog - Common Event Format, syslog-compatible format. This field is a summary of the settings for each log. Click this button to open the Active Log Summary screen. Summary Active Log Summary Apply Click this button to save your changes (activate and deactivate logs) and make them take effect. 15.3.2 Edit System Log Settings This screen controls the detailed settings for each log in the system log (which includes the e-mail profiles). Select a system log entry in the Log Setting screen and click the Edit icon. NWA / WAC Series Users Guide 177 Chapter 15 Log and Report Figure 114 Configuration > Log & Report > Log Setting > Edit System Log Setting NWA / WAC Series Users Guide 178 Chapter 15 Log and Report The following table describes the labels in this screen. Table 82 Configuration > Log & Report > Log Setting > Edit System Log Setting LABEL E-Mail Server 1/2 DESCRIPTION Active Mail Server SSL/TLS Encryption Mail Server Port Mail Subject Send From Send Log To Send Alerts To Sending Log Select this to send log messages and alerts according to the information in this section. You specify what kinds of log messages are included in log information and what kinds of log messages are included in alerts in the Active Log and Alert section. Type the name or IP address of the outgoing SMTP server. Select SSL/TLS to use Secure Sockets Layer (SSL) or Transport Layer Security (TLS) if you want encrypted communications between the mail server and the NWA/WAC. Select STARTTLS to upgrade a plain text connection to a secure connection using SSL/TLS. Select No to not encrypt the communications. Enter the same port number here as is on the mail server for mail traffic. Type the subject line for the outgoing e-mail. Select Append system name to add the NWA/WACs system name to the subject. Select Append date time to add the NWA/
WACs system date and time to the subject. Type the e-mail address from which the outgoing e-mail is delivered. This address is used in replies. Type the e-mail address to which the outgoing e-mail is delivered. Type the e-mail address to which alerts are delivered. Select how often log information is e-mailed. Choices are: When Full, Hourly and When Full, Daily and When Full, and Weekly and When Full. Day for Sending Log This field is available if the log is e-mailed weekly. Select the day of the week the log is e-
Time for Sending Log SMTP Authentication User Name Password Active Log and Alert System log mailed. This field is available if the log is e-mailed weekly or daily. Select the time of day (hours and minutes) when the log is e-mailed. Use 24-hour notation. Select this check box if it is necessary to provide a user name and password to the SMTP server. This box is effective when you select the SMTP Authentication check box. Type the user name to provide to the SMTP server when the log is e-mailed. This box is effective when you select the SMTP Authentication check box. Type the password to provide to the SMTP server when the log is e-mailed. Use the System Log drop-down list to change the log settings for all of the log categories. disable all logs (red X) - do not log any information for any category for the system log or e-mail any logs to e-mail server 1 or 2. enable normal logs (green check mark) - create log messages and alerts for all categories for the system log. If e-mail server 1 or 2 also has normal logs enabled, the NWA/WAC will e-mail logs to them. enable normal logs and debug logs (yellow check mark) - create log messages, alerts, and debugging information for all categories. The NWA/WAC does not e-mail debugging information, even if this setting is selected. NWA / WAC Series Users Guide 179 Chapter 15 Log and Report Table 82 Configuration > Log & Report > Log Setting > Edit System Log Setting (continued) LABEL E-mail Server 1 E-mail Server 2
#
Log Category System log E-mail Server 1 E-mail Server 2 Log Consolidation Active Log Consolidation Interval OK Cancel DESCRIPTION Use the E-Mail Server 1 drop-down list to change the settings for e-mailing logs to e-mail server 1 for all log categories. Using the System Log drop-down list to disable all logs overrides your e-mail server 1 settings. enable normal logs (green check mark) - e-mail log messages for all categories to e-mail server 1. enable alert logs (red exclamation point) - e-mail alerts for all categories to e-mail server 1. Use the E-Mail Server 2 drop-down list to change the settings for e-mailing logs to e-mail server 2 for all log categories. Using the System Log drop-down list to disable all logs overrides your e-mail server 2 settings. enable normal logs (green check mark) - e-mail log messages for all categories to e-mail server 2. enable alert logs (red exclamation point) - e-mail alerts for all categories to e-mail server 2. This field is a sequential value, and it is not associated with a specific address. This field displays each category of messages. It is the same value used in the Display and Category fields in the View Log tab. The Default category includes debugging messages generated by open source software. Select which events you want to log by Log Category. There are three choices:
disable all logs (red X) - do not log any information from this category enable normal logs (green checkmark) - create log messages and alerts from this category enable normal logs and debug logs (yellow check mark) - create log messages, alerts, and debugging information from this category; the NWA/WAC does not e-mail debugging information, however, even if this setting is selected. Select whether each category of events should be included in the log messages when it is e-mailed (green check mark) and/or in alerts (red exclamation point) for the e-mail settings specified in E-Mail Server 1. The NWA/WAC does not e-mail debugging information, even if it is recorded in the System log. Select whether each category of events should be included in log messages when it is e-
mailed (green check mark) and/or in alerts (red exclamation point) for the e-mail settings specified in E-Mail Server 2. The NWA/WAC does not e-mail debugging information, even if it is recorded in the System log. Select this to activate log consolidation. Log consolidation aggregates multiple log messages that arrive within the specified Log Consolidation Interval. In the View Log tab, the text [count=x], where x is the number of original log messages, is appended at the end of the Message field, when multiple log messages were aggregated. Type how often, in seconds, to consolidate log information. If the same log message appears multiple times, it is aggregated into one log message with the text [count=x], where x is the number of original log messages, appended at the end of the Message field. Click this to save your changes and return to the previous screen. Click this to return to the previous screen without saving your changes. NWA / WAC Series Users Guide 180 Chapter 15 Log and Report 15.3.3 Edit Remote Server This screen controls the settings for each log in the remote server (syslog). Select a remote server entry in the Log Setting screen and click the Edit icon. Figure 115 Configuration > Log & Report > Log Setting > Edit Remote Server NWA / WAC Series Users Guide 181 Chapter 15 Log and Report The following table describes the labels in this screen. Table 83 Configuration > Log & Report > Log Setting > Edit Remote Server LABEL Log Settings for Remote Server DESCRIPTION Active Log Format Server Address Log Facility Active Log Selection
#
Log Category Selection OK Cancel Select this check box to send log information according to the information in this section. You specify what kinds of messages are included in log information in the Active Log section. This field displays the format of the log information. It is read-only. VRPT/Syslog - Zyxels Vantage Report, syslog-compatible format. CEF/Syslog - Common Event Format, syslog-compatible format. Type the server name or the IP address of the syslog server to which to send log information. Select a log facility. The log facility allows you to log the messages to different files in the syslog server. Please see the documentation for your syslog program for more information. Use the Selection drop-down list to change the log settings for all of the log categories. disable all logs (red X) - do not send the remote server logs for any log category. enable normal logs (green check mark) - send the remote server log messages and alerts for all log categories. enable normal logs and debug logs (yellow check mark) - send the remote server log messages, alerts, and debugging information for all log categories. This field is a sequential value, and it is not associated with a specific address. This field displays each category of messages. It is the same value used in the Display and Category fields in the View Log tab. The Default category includes debugging messages generated by open source software. Select what information you want to log from each Log Category (except All Logs; see below). Choices are:
disable all logs (red X) - do not log any information from this category enable normal logs (green checkmark) - log regular information and alerts from this category enable normal logs and debug logs (yellow check mark) - log regular information, alerts, and debugging information from this category Click this to save your changes and return to the previous screen. Click this to return to the previous screen without saving your changes. 15.3.4 Active Log Summary This screen allows you to view and to edit what information is included in the system log, e-mail profiles, and remote servers at the same time. It does not let you change other log settings (for example, where and how often log information is e-mailed or remote server names). To access this screen, go to the Log Setting screen, and click the Active Log Summary button. NWA / WAC Series Users Guide 182 Chapter 15 Log and Report Figure 116 Active Log Summary This screen provides a different view and a different way of indicating which messages are included in each log and each alert. (The Default category includes debugging messages generated by open source software.) The following table describes the fields in this screen. Table 84 Configuration > Log & Report > Log Setting > Active Log Summary LABEL Active Log Summary System log DESCRIPTION If the NWA/WAC is set to controller mode, the AC section controls logs generated by the controller and the AP section controls logs generated by the managed APs. Use the System Log drop-down list to change the log settings for all of the log categories. disable all logs (red X) - do not log any information for any category for the system log or e-mail any logs to e-mail server 1 or 2. enable normal logs (green check mark) - create log messages and alerts for all categories for the system log. If e-mail server 1 or 2 also has normal logs enabled, the NWA/WAC will e-mail logs to them. enable normal logs and debug logs (yellow check mark) - create log messages, alerts, and debugging information for all categories. The NWA/WAC does not e-mail debugging information, even if this setting is selected. NWA / WAC Series Users Guide 183 Chapter 15 Log and Report Table 84 Configuration > Log & Report > Log Setting > Active Log Summary (continued) LABEL E-mail Server 1 DESCRIPTION Use the E-Mail Server 1 drop-down list to change the settings for e-mailing logs to e-mail server 1 for all log categories. Using the System Log drop-down list to disable all logs overrides your e-mail server 1 settings. enable normal logs (green check mark) - e-mail log messages for all categories to e-mail server 1. enable alert logs (red exclamation point) - e-mail alerts for all categories to e-mail server 1. Use the E-Mail Server 2 drop-down list to change the settings for e-mailing logs to e-mail server 2 for all log categories. Using the System Log drop-down list to disable all logs overrides your e-mail server 2 settings. enable normal logs (green check mark) - e-mail log messages for all categories to e-mail server 2. enable alert logs (red exclamation point) - e-mail alerts for all categories to e-mail server 2. For each remote server, use the Selection drop-down list to change the log settings for all of the log categories. disable all logs (red X) - do not send the remote server logs for any log category. enable normal logs (green check mark) - send the remote server log messages and alerts for all log categories. enable normal logs and debug logs (yellow check mark) - send the remote server log messages, alerts, and debugging information for all log categories. This field is a sequential value, and it is not associated with a specific address. This field displays each category of messages. It is the same value used in the Display and Category fields in the View Log tab. The Default category includes debugging messages generated by open source software. Select which events you want to log by Log Category. There are three choices:
disable all logs (red X) - do not log any information from this category enable normal logs (green checkmark) - create log messages and alerts from this category enable normal logs and debug logs (yellow check mark) - create log messages, alerts, and debugging information from this category; the NWA/WAC does not e-mail debugging information, however, even if this setting is selected. Select whether each category of events should be included in the log messages when it is e-
mailed (green check mark) and/or in alerts (red exclamation point) for the e-mail settings specified in E-Mail Server 1. The NWA/WAC does not e-mail debugging information, even if it is recorded in the System log. Select whether each category of events should be included in log messages when it is e-
mailed (green check mark) and/or in alerts (red exclamation point) for the e-mail settings specified in E-Mail Server 2. The NWA/WAC does not e-mail debugging information, even if it is recorded in the System log. For each remote server, select what information you want to log from each Log Category
(except All Logs; see below). Choices are:
disable all logs (red X) - do not log any information from this category enable normal logs (green checkmark) - log regular information and alerts from this category enable normal logs and debug logs (yellow check mark) - log regular information, alerts, and debugging information from this category Click this to save your changes and return to the previous screen. Click this to return to the previous screen without saving your changes. E-mail Server 2 Remote Server 1~4
#
Log Category System log E-mail Server 1 E-
mail E-mail Server 2 E-
mail Remote Server 1~4 Syslog OK Cancel NWA / WAC Series Users Guide 184 CHAPTER 16 File Manager 16.1 Overview Configuration files define the NWA/WACs settings. Shell scripts are files of commands that you can store on the NWA/WAC and run when you need them. You can apply a configuration file or run a shell script without the NWA/WAC restarting. You can store multiple configuration files and shell script files on the NWA/WAC. You can edit configuration files or shell scripts in a text editor and upload them to the NWA/
WAC. Configuration files use a .conf extension and shell scripts use a .zysh extension. 16.1.1 What You Can Do in this Chapter The Configuration File screen (Section 16.2 on page 186) stores and names configuration files. You can also download and upload configuration files. The Firmware Package screen (Section 16.3 on page 191) checks your current firmware version and uploads firmware to the NWA/WAC. The Shell Script screen (Section 16.4 on page 193) stores, names, downloads, uploads and runs shell script files. 16.1.2 What you Need to Know The following terms and concepts may help as you read this chapter. Configuration Files and Shell Scripts When you apply a configuration file, the NWA/WAC uses the factory default settings for any features that the configuration file does not include. When you run a shell script, the NWA/WAC only applies the commands that it contains. Other settings do not change. These files have the same syntax, which is also identical to the way you run CLI commands manually. An example is shown below. Figure 117 Configuration File / Shell Script: Example
# enter configuration mode configure terminal
# change administrator password username admin password 4321 user-type admin
#configure default radio profile, change 2GHz channel to 11 & Tx output power # to 50%
wlan-radio-profile default 2g-channel 11 output-power 50%
exit write NWA / WAC Series Users Guide 185 Chapter 16 File Manager While configuration files and shell scripts have the same syntax, the NWA/WAC applies configuration files differently than it runs shell scripts. This is explained below. Table 85 Configuration Files and Shell Scripts in the NWA/WAC Configuration Files (.conf) Resets to default configuration. Goes into CLI Configuration mode. Runs the commands in the configuration file. Shell Scripts (.zysh) Goes into CLI Privilege mode. Runs the commands in the shell script. You have to run the aforementioned example as a shell script because the first command is run in Privilege mode. If you remove the first command, you have to run the example as a configuration file because the rest of the commands are executed in Configuration mode. Comments in Configuration Files or Shell Scripts In a configuration file or shell script, use # or ! as the first character of a command line to have the NWA/WAC treat the line as a comment. Your configuration files or shell scripts can use exit or a command line consisting of a single ! to have the NWA/WAC exit sub command mode. Note: exit or !' must follow sub commands if it is to make the NWA/WAC exit sub command mode. In the following example lines 1 and 2 are comments. Line 7 exits sub command mode.
! this is from Joe
# on 2010/12/05 wlan-ssid-profile default ssid Joe-AP qos wmm security default
!
Errors in Configuration Files or Shell Scripts When you apply a configuration file or run a shell script, the NWA/WAC processes the file line-by-line. The NWA/WAC checks the first line and applies the line if no errors are detected. Then it continues with the next line. If the NWA/WAC finds an error, it stops applying the configuration file or shell script and generates a log. You can change the way a configuration file or shell script is applied. Include setenv stop-on-error off in the configuration file or shell script. The NWA/WAC ignores any errors in the configuration file or shell script and applies all of the valid commands. The NWA/WAC still generates a log for any errors. 16.2 Configuration File Click Maintenance > File Manager > Configuration File to open this screen. Use the Configuration File screen to store, run, and name configuration files. You can also download configuration files from the NWA/WAC to your computer and upload configuration files from your computer to the NWA/WAC. NWA / WAC Series Users Guide 186 Chapter 16 File Manager Once your NWA/WAC is configured and functioning properly, it is highly recommended that you back up your configuration file before making further configuration changes. The backup configuration file will be useful in case you need to return to your previous settings. Configuration File Flow at Restart If there is not a startup-config.conf when you restart the NWA/WAC (whether through a management interface or by physically turning the power off and back on), the NWA/WAC uses the system-
default.conf configuration file with the NWA/WACs default settings. If there is a startup-config.conf, the NWA/WAC checks it for errors and applies it. If there are no errors, the NWA/WAC uses it and copies it to the lastgood.conf configuration file as a back up file. If there is an error, the NWA/WAC generates a log and copies the startup-config.conf configuration file to the startup-config-bad.conf configuration file and tries the existing lastgood.conf configuration file. If there isnt a lastgood.conf configuration file or it also has an error, the NWA/WAC applies the system-
default.conf configuration file. You can change the way the startup-config.conf file is applied. Include the setenv-startup stop-
on-error off command. The NWA/WAC ignores any errors in the startup-config.conf file and applies all of the valid commands. The NWA/WAC still generates a log for any errors. Figure 118 Maintenance > File Manager > Configuration File Do not turn off the NWA/WAC while configuration file upload is in progress. NWA / WAC Series Users Guide 187 Chapter 16 File Manager The following table describes the labels in this screen. Table 86 Maintenance > File Manager > Configuration File LABEL Rename DESCRIPTION Use this button to change the label of a configuration file on the NWA/WAC. You can only rename manually saved configuration files. You cannot rename the lastgood.conf, system-
default.conf and startup-config.conf files. You cannot rename a configuration file to the name of another configuration file in the NWA/
WAC. Click a configuration files row to select it and click Rename to open the Rename File screen. Specify the new name for the configuration file. Use up to 25 characters (including a-zA-Z0-
9;~!@#$%^&()_+[]{},.=-). Click OK to save the duplicate or click Cancel to close the screen without saving a duplicate of the configuration file. Click a configuration files row to select it and click Remove to delete it from the NWA/WAC. You can only delete manually saved configuration files. You cannot delete the system-
default.conf, startup-config.conf and lastgood.conf files. A pop-up window asks you to confirm that you want to delete the configuration file. Click OK to delete the configuration file or click Cancel to close the screen without deleting the configuration file. Click a configuration files row to select it and click Download to save the configuration to your computer. Use this button to save a duplicate of a configuration file on the NWA/WAC. Click a configuration files row to select it and click Copy to open the Copy File screen. Remove Download Copy Specify a name for the duplicate configuration file. Use up to 25 characters (including a-zA-Z0-
9;~!@#$%^&()_+[]{},.=-). Click OK to save the duplicate or click Cancel to close the screen without saving a duplicate of the configuration file. NWA / WAC Series Users Guide 188 Chapter 16 File Manager Table 86 Maintenance > File Manager > Configuration File (continued) LABEL Apply DESCRIPTION Use this button to have the NWA/WAC use a specific configuration file. Click a configuration files row to select it and click Apply to have the NWA/WAC use that configuration file. The NWA/WAC does not have to restart in order to use a different configuration file, although you will need to wait for a few minutes while the system reconfigures. The following screen gives you options for what the NWA/WAC is to do if it encounters an error in the configuration file. Immediately stop applying the configuration file - this is not recommended because it would leave the rest of the configuration blank. If the interfaces were not configured before the first error, the console port may be the only way to access the device. Immediately stop applying the configuration file and roll back to the previous configuration -
this gets the NWA/WAC started with a fully valid configuration file as quickly as possible. Ignore errors and finish applying the configuration file - this applies the valid parts of the configuration file and generates error logs for all of the configuration files errors. This lets the NWA/WAC apply most of your configuration and you can refer to the logs for what to fix. Ignore errors and finish applying the configuration file and then roll back to the previous configuration - this applies the valid parts of the configuration file, generates error logs for all of the configuration files errors, and starts the NWA/WAC with a fully valid configuration file. Click OK to have the NWA/WAC start applying the configuration file or click Cancel to close the screen This column displays the number for each configuration file entry. This field is a sequential value, and it is not associated with a specific address. The total number of configuration files that you can save depends on the sizes of the configuration files and the available flash storage space. This column displays the label that identifies a configuration file. You cannot delete the following configuration files or change their file names. The system-default.conf file contains the NWA/WACs default settings. Select this file and click Apply to reset all of the NWA/WAC settings to the factory defaults. This configuration file is included when you upload a firmware package. The startup-config.conf file is the configuration file that the NWA/WAC is currently using. If you make and save changes during your management session, the changes are applied to this configuration file. The NWA/WAC applies configuration changes made in the Web Configurator to the configuration file when you click Apply or OK. It applies configuration changes made via commands when you use the write command. The lastgood.conf is the most recently used (valid) configuration file that was saved when the device last restarted. If you upload and apply a configuration file with an error, you can apply lastgood.conf to return to a valid configuration. This column displays the size (in KB) of a configuration file. NWA / WAC Series Users Guide 189
#
File Name Size Chapter 16 File Manager Table 86 Maintenance > File Manager > Configuration File (continued) LABEL Last Modified DESCRIPTION This column displays the date and time that the individual configuration files were last changed or saved. The bottom part of the screen allows you to upload a new or previously saved configuration file from your computer to your NWA/WAC You cannot upload a configuration file named system-default.conf or lastgood.conf. If you upload startup-config.conf, it will replace the current configuration and immediately apply the new settings. Type in the location of the file you want to upload in this field or click Browse... to find it. Click Browse... to find the .conf file you want to upload. The configuration file must use a
.conf filename extension. You will receive an error message if you try to upload a fie of a different format. Remember that you must decompress compressed (.zip) files before you can upload them. Click Upload to begin the upload process. This process may take up to two minutes. Upload Configuration File File Path Browse... Upload 16.2.1 Example of Configuration File Download Using FTP The following example gets a configuration file named startup-config.conf from the NWA/WAC and saves it on the computer. 1 Connect your computer to the NWA/WAC. 2 3 4 5 6 7 8 The FTP server IP address of the NWA/WAC in standalone AP mode is 192.168.1.2, so set your computer to use a static IP address from 192.168.1.3 ~192.168.1.254. Use an FTP client on your computer to connect to the NWA/WAC. For example, in the Windows command prompt, type ftp 192.168.1.2. Keep the console session connected in order to see when the firmware recovery finishes. Enter your user name when prompted. Enter your password as requested. Use cd to change to the directory that contains the files you want to download. Use dir or ls if you need to display a list of the files in the directory. Use "get to download files. Transfer the configuration file on the NWA/WAC to your computer. Type get followed by the name of the configuration file. This examples uses get startup-config.conf. NWA / WAC Series Users Guide 190 Chapter 16 File Manager C:\>ftp 192.168.1.2 Connected to 192.168.1.2. 220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
220-You are user number 1 of 5 allowed. 220-Local time is now 21:28. Server port: 21. 220-This is a private system - No anonymous login 220 You will be disconnected after 600 minutes of inactivity. User (192.168.1.2:(none)): admin 331 User admin OK. Password required Password:
230 OK. Current restricted directory is /
ftp> cd conf 250 OK. Current directory is /conf ftp> ls 200 PORT command successful 150 Connecting to port 5001 lastgood.conf startup-config.conf system-default.conf 226 3 matches total ftp: 57 bytes received in 0.33Seconds 0.17Kbytes/sec. ftp> get startup-config.conf 200 PORT command successful 150 Connecting to port 5002 226-File successfully transferred 226 0.002 seconds (measured here), 1.66 Mbytes per second ftp: 2928 bytes received in 0.02Seconds 183.00Kbytes/sec. ftp>
9 Wait for the file transfer to complete. 10 Enter quit to exit the ftp prompt. 16.3 Firmware Package Click Maintenance > File Manager > Firmware Package to open this screen. Use the Firmware Package screen to check your current firmware version and upload firmware to the NWA/WAC. Note: The Web Configurator is the recommended method for uploading firmware. You only need to use the command line interface if you need to recover the firmware. See the CLI Reference Guide for how to determine if you need to recover the firmware and how to recover it. Find the firmware package at www.zyxel.com in a file that (usually) uses a .bin extension. The firmware update can take up to five minutes. Do not turn off or reset the NWA/WAC while the firmware update is in progress!
NWA / WAC Series Users Guide 191 Chapter 16 File Manager Figure 119 Maintenance > File Manager > Firmware Package The following table describes the labels in this screen. DESCRIPTION This is the version of the boot module that is currently on the NWA/WAC. Table 87 Maintenance > File Manager > Firmware Package LABEL Boot Module Current Version Released Date File Path Browse... This is the firmware version and the date created. This is the date that the version of the firmware was created. Type in the location of the file you want to upload in this field or click Browse... to find it. Click Browse... to find the .bin file you want to upload. Remember that you must decompress compressed (.zip) files before you can upload them. Click Upload to begin the upload process. This process may take up to two minutes. Upload After you see the Firmware Upload in Process screen, wait two minutes before logging into the NWA/
WAC again. Note: The NWA/WAC automatically reboots after a successful upload. The NWA/WAC automatically restarts causing a temporary network disconnect. In some operating systems, you may see the following icon on your desktop. Figure 120 Network Temporarily Disconnected After five minutes, log in again and check your new firmware version in the Dashboard screen. 16.3.1 Example of Firmware Upload Using FTP This procedure requires the NWA/WACs firmware. Download the firmware package from www.zyxel.com and unzip it. The firmware file uses a .bin extension, for example, "510ABFH0C0.bin". Do the following after you have obtained the firmware file. 1 Connect your computer to the NWA/WAC. NWA / WAC Series Users Guide 192 Chapter 16 File Manager 2 3 4 5 6 7 8 The FTP server IP address of the NWA/WAC in standalone AP mode is 192.168.1.2, so set your computer to use a static IP address from 192.168.1.3 ~192.168.1.254. Use an FTP client on your computer to connect to the NWA/WAC. For example, in the Windows command prompt, type ftp 192.168.1.2. Keep the console session connected in order to see when the firmware recovery finishes. Enter your user name when prompted. Enter your password as requested. Enter hash for FTP to print a `#' character for every 1024 bytes of data you upload so that you can watch the file transfer progress. Enter bin to set the transfer mode to binary. Transfer the firmware file from your computer to the NWA/WAC. Type put followed by the path and name of the firmware file. This examples uses put C:\ftproot\NWA/WAC_FW\510ABFH0C0.bin. C:\>ftp 192.168.1.2 Connected to 192.168.1.2. 220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
220-You are user number 1 of 5 allowed. 220-Local time is now 21:28. Server port: 21. 220-This is a private system - No anonymous login 220 You will be disconnected after 600 minutes of inactivity. User (192.168.1.2:(none)): admin 331 User admin OK. Password required Password:
230 OK. Current restricted directory is /
ftp> hash Hash mark printing On ftp: (2048 bytes/hash mark) . ftp> bin 200 TYPE is now 8-bit binary ftp> put C:\ftproot\NWA/WAC_FW\510ABFH0C0.bin 9 Wait for the file transfer to complete. 10 Enter quit to exit the ftp prompt. 16.4 Shell Script Use shell script files to have the NWA/WAC use commands that you specify. Use a text editor to create the shell script files. They must use a .zysh filename extension. Click Maintenance > File Manager > Shell Script to open this screen. Use the Shell Script screen to store, name, download, upload and run shell script files. You can store multiple shell script files on the NWA/
WAC at the same time. Note: You should include write commands in your scripts. If you do not use the write command, the changes will be lost when the NWA/WAC restarts. You could use multiple write commands in a long script. NWA / WAC Series Users Guide 193 Chapter 16 File Manager Figure 121 Maintenance > File Manager > Shell Script Each field is described in the following table. Table 88 Maintenance > File Manager > Shell Script LABEL Rename DESCRIPTION Use this button to change the label of a shell script file on the NWA/WAC. You cannot rename a shell script to the name of another shell script in the NWA/WAC. Click a shell scripts row to select it and click Rename to open the Rename File screen. Specify the new name for the shell script file. Use up to 25 characters (including a-zA-Z0-
9;~!@#$%^&()_+[]{},.=-). Click OK to save the duplicate or click Cancel to close the screen without saving a duplicate of the configuration file. Click a shell script files row to select it and click Delete to delete the shell script file from the NWA/
WAC. A pop-up window asks you to confirm that you want to delete the shell script file. Click OK to delete the shell script file or click Cancel to close the screen without deleting the shell script file. Click a shell script files row to select it and click Download to save the configuration to your computer. Use this button to save a duplicate of a shell script file on the NWA/WAC. Click a shell script files row to select it and click Copy to open the Copy File screen. Specify a name for the duplicate file. Use up to 25 characters (including a-zA-Z0-
9;~!@#$%^&()_+[]{},.=-). Click OK to save the duplicate or click Cancel to close the screen without saving a duplicate of the configuration file. Use this button to have the NWA/WAC use a specific shell script file. Click a shell script files row to select it and click Apply to have the NWA/WAC use that shell script file. You may need to wait awhile for the NWA/WAC to finish applying the commands. This column displays the number for each shell script file entry. This column displays the label that identifies a shell script file. This column displays the size (in KB) of a shell script file. This column displays the date and time that the individual shell script files were last changed or saved. The bottom part of the screen allows you to upload a new or previously saved shell script file from your computer to your NWA/WAC. Type in the location of the file you want to upload in this field or click Browse... to find it. Remove Download Copy Apply
#
File Name Size Last Modified Upload Shell Script File Path NWA / WAC Series Users Guide 194 Chapter 16 File Manager Table 88 Maintenance > File Manager > Shell Script (continued) LABEL Browse... Upload DESCRIPTION Click Browse... to find the .zysh file you want to upload. Click Upload to begin the upload process. This process may take up to several minutes. NWA / WAC Series Users Guide 195 CHAPTER 17 Diagnostics 17.1 Overview Use the diagnostics screen for troubleshooting. 17.1.1 What You Can Do in this Chapter The Diagnostics screen (Section 17.2 on page 196) generates a file containing the NWA/WACs configuration and diagnostic information if you need to provide it to customer support during troubleshooting. 17.2 Diagnostics This screen provides an easy way for you to generate a file containing the NWA/WACs configuration and diagnostic information. You may need to generate this file and send it to customer support during troubleshooting. Click Maintenance > Diagnostics to open the Diagnostic screen. Figure 122 Maintenance > Diagnostics NWA / WAC Series Users Guide 196 Chapter 17 Diagnostics The following table describes the labels in this screen. Table 89 Maintenance > Diagnostics LABEL Filename Last modified DESCRIPTION This is the name of the most recently created diagnostic file. This is the date and time that the last diagnostic file was created. The format is yyyy-mm-dd hh:mm:ss. This is the size of the most recently created diagnostic file. This field displays each category of settings. Select which categories you want the NWA/
WAC to include in the diagnostic file. Select this option to obtain the diagnostic information for configuration which is not included in a pre-defined category. If you select the Customized option, select a shell script file from the drop-down list. You can upload a new shell script file using the Maintenance > File Manager > Shell Script screen. Click this to have the NWA/WAC create a new diagnostic file. Click this to save the most recent diagnostic file to a computer. Size Diagnostic Collect Category Customized Script Collect Now Download NWA / WAC Series Users Guide 197 CHAPTER 18 LEDs 18.1 Overview The LEDs of your NWA/WAC can be controlled such that they stay lit (ON) or OFF after the NWA/WAC is ready. There are two features that control the LEDs of your NWA/WAC - Locator and Suppression. 18.1.1 What You Can Do in this Chapter The Suppression screen (Section 18.2 on page 198)) allows you to set how you want the LEDs to behave after the device is ready. The Locator screen (Section 18.3 on page 199) allows users to see the actual location of the NWA/
WAC between several devices in the network. 18.2 Suppression Screen The LED Suppression feature allows you to control how the LEDs of your NWA/WAC behave after its ready. The default LED suppression setting of your AP is different depending on your NWA/WAC model. You can go to the Maintenance > LEDs > Suppression screen to see the default LED behavior and change the LED suppression setting. After you make changes in the suppression screen, it will be stored as the default when the NWA/WAC is restarted. See (Section 1.6 on page 25) for information on default values for different models. Note: When the NWA/WAC is booting or performing firmware upgrade, the LEDs will lit regardless of the setting in LED suppression. To access this screen, click Maintenance > LEDs > Suppression. Figure 123 Maintenance > LEDs > Suppression NWA / WAC Series Users Guide 198 Chapter 18 LEDs The following table describes fields in the above screen. Table 90 Maintenance > LED > Suppression LABEL Suppression On DESCRIPTION If the Suppression On check box is checked, the LEDs of your NWA/WAC will turn off after its ready. Apply Reset If the check box is unchecked, the LEDs will stay lit after the NWA/WAC is ready. Click Apply to save your changes back to the NWA/WAC. Click Reset to return the screen to its last-saved settings. 18.3 Locator Screen The Locator feature identifies the location of your WAC among several devices in the network. You can run this feature and set a timer in this screen. To run the locator feature, enter a number of minutes and click Turn On button to have the WAC find its location. The Locator LED will start to blink for the number of minutes set in the Locator screen. The default setting is 10 minutes. While the locator is running, the turn on button will gray out and return after its finished. If you make changes to the time default setting, it will be stored as the default when the WAC restarts. Note: The Locator feature is not affected by the Suppression setting. To access this screen, click Maintenance > LEDs > Locator. Figure 124 Maintenance > LEDs > Locator The following table describes fields in the above screen. Turn Off Table 91 Maintenance > LED > Locator DESCRIPTION LABEL Click Turn On button to activate the locator. The Locator function will show the actual Turn On location of the WAC between several devices in the network. Otherwise, click Turn Off to disable the locator feature. Enter a time interval between 1 and 60 minutes to stop the locator LED from blinking. Default is 10 minutes. Click Apply to save changes in this screen. Click Refresh to update the information in this screen. Automatically Extinguish After Apply Refresh NWA / WAC Series Users Guide 199 CHAPTER 19 Antenna Switch 19.1 Overview Use this screen to adjust coverage depending on the orientation of the antenna. 19.1.1 What You Need To Know Positioning the antennas properly increases the range and coverage area of a wireless LAN. On the NWA/WAC that comes with internal antennas and also has an antenna switch, you can adjust coverage depending on the orientation of the antenna for the NWA/WAC radios using the web configurator, the command line interface (CLI) or a physical switch. Check Table 1 on page 13 and Table 3 on page 15 to see if your NWA/WAC has an antenna switch. Figure 125 WAC6103D-I Physical Antenna Switch Note: With the physical antenna switch, you apply the same antenna orientation settings to both radios. You can set the radios to have different settings while using the web configurator or the command line interface. Note: The antenna switch in the web configurator has priority over the physical antenna switch after you Enable Software Control in the Maintenance > Antenna screen. By default, software control is disabled. 19.2 Antenna Switch Screen To access this screen, click Maintenance > Antenna. NWA / WAC Series Users Guide 200 Chapter 19 Antenna Switch Figure 126 Maintenance > Antenna > Antenna Switch Select the Enable Software Control option to use the Web configurator to adjust coverage depending on each radios antenna orientation for better coverage. Select Wall if you mount the NWA/WAC to a wall. Select Ceiling if the NWA/WAC is mounted on a ceiling. You can switch from Wall to Ceiling if there are still wireless dead zones, and vice versa. NWA / WAC Series Users Guide 201 CHAPTER 20 Reboot 20.1 Overview Use this screen to restart the device. 20.1.1 What You Need To Know If you applied changes in the Web configurator, these were saved automatically and do not change when you reboot. If you made changes in the CLI, however, you have to use the write command to save the configuration before you reboot. Otherwise, the changes are lost when you reboot. Reboot is different to reset; reset returns the device to its default configuration. 20.2 Reboot This screen allows remote users can restart the device. To access this screen, click Maintenance >
Reboot. Figure 127 Maintenance > Reboot Click the Reboot button to restart the NWA/WAC. Wait a few minutes until the login screen appears. If the login screen does not appear, type the IP address of the device in your Web browser. You can also use the CLI command reboot to restart the NWA/WAC. NWA / WAC Series Users Guide 202 CHAPTER 21 Shutdown 21.1 Overview Use this screen to shut down the device. Always use Maintenance > Shutdown > Shutdown or the shutdown command before you turn off the NWA/WAC or remove the power. Not doing so can cause the firmware to become corrupt. 21.1.1 What You Need To Know Shutdown writes all cached data to the local storage and stops the system processes. Shutdown is different to reset; reset returns the device to its default configuration. 21.2 Shutdown To access this screen, click Maintenance > Shutdown. Figure 128 Maintenance > Shutdown Click the Shutdown button to shut down the NWA/WAC. Wait for the device to shut down before you manually turn off or remove the power. It does not turn off the power. You can also use the CLI command shutdown to shut down the NWA/WAC. NWA / WAC Series Users Guide 203 CHAPTER 22 Troubleshooting 22.1 Overview This chapter offers some suggestions to solve problems you might encounter. The potential problems are divided into the following categories. Power, Hardware Connections, and LED NWA/WAC Access and Login Internet Access Wireless Connections Resetting the NWA/WAC 22.2 Power, Hardware Connections, and LED The NWA/WAC does not turn on. The LED is not on. 1 Make sure you are using the power adaptor included with the NWA/WAC or a PoE power injector/
switch. 2 Make sure the power adaptor or PoE power injector/switch is connected to the NWA/WAC and plugged in to an appropriate power source. Make sure the power source is turned on. 3 Disconnect and re-connect the power adaptor or PoE power injector/switch. 4 5 Inspect your cables for damage. Contact the vendor to replace any damaged cables. If none of these steps work, you may have faulty hardware and should contact your NWA/WAC vendor. The LED does not behave as expected. 1 Make sure you understand the normal behavior of the LED. See Section 1.6 on page 25. 2 Check the hardware connections. See the Quick Start Guide. 3 Inspect your cables for damage. Contact the vendor to replace any damaged cables. NWA / WAC Series Users Guide 204 Chapter 22 Troubleshooting 4 Disconnect and re-connect the power adaptor or PoE power injector to the NWA/WAC. 5 If the problem continues, contact the vendor. 22.3 NWA/WAC Access and Login I forgot the IP address for the NWA/WAC. 1 2 3 The default IP address (in standalone AP mode) is 192.168.1.2. If you changed the IP address and have forgotten it, you have to reset the device to its factory defaults. See Section 22.6 on page 212. If your NWA/WAC is a DHCP client, you can find your IP address from the DHCP server. This information is only available from the DHCP server which allocates IP addresses on your network. Find this information directly from the DHCP server or contact your system administrator for more information. I cannot see or access the Login screen in the web configurator. 1 Make sure you are using the correct IP address. The default IP address (in standalone AP mode) is 192.168.1.2. If you changed the IP address, use the new IP address. If you changed the IP address and have forgotten it, see the troubleshooting suggestions for I forgot the IP address for the NWA/WAC. 2 Check the hardware connections, and make sure the LED is behaving as expected. See the Quick Start Guide and Section 1.6 on page 25. 3 Make sure your Internet browser does not block pop-up windows and has JavaScripts and Java enabled. 4 Make sure your computer is in the same subnet as the NWA/WAC. (If you know that there are routers between your computer and the NWA/WAC, skip this step.) If there is a DHCP server on your network, make sure your computer is using a dynamic IP address. If there is no DHCP server on your network, make sure your computers IP address is in the same subnet as the NWA/WAC. 5 6 Reset the device to its factory defaults, and try to access the NWA/WAC with the default IP address. See Section 22.6 on page 212. If the problem continues, contact the network administrator or vendor, or try one of the advanced suggestions. Advanced Suggestions NWA / WAC Series Users Guide 205 Chapter 22 Troubleshooting Try to access the NWA/WAC using another service, such as Telnet. If you can access the NWA/WAC, check the remote management settings to find out why the NWA/WAC does not respond to HTTP. If your computer is connected wirelessly, use a computer that is connected to a LAN/ETHERNET port. I forgot the password. 1 2 The default password is 1234. If this does not work, you have to reset the device to its factory defaults. See Section 22.6 on page 212. I can see the Login screen, but I cannot log in to the NWA/WAC. 1 Make sure you have entered the user name and password correctly. The default password is 1234. This fields are case-sensitive, so make sure [Caps Lock] is not on. 2 You cannot log in to the web configurator while someone is using Telnet to access the NWA/WAC. Log out of the NWA/WAC in the other session, or ask the person who is logged in to log out. 3 Disconnect and re-connect the power adaptor or PoE power injector to the NWA/WAC. 4 If this does not work, you have to reset the device to its factory defaults. See Section 22.6 on page 212. I cannot use FTP to upload / download the configuration file. / I cannot use FTP to upload new firmware. See the troubleshooting suggestions for I cannot see or access the Login screen in the web configurator. Ignore the suggestions about your browser. 22.4 Internet Access I cannot access the Internet. 1 Check the hardware connections, and make sure the LED is behaving as expected. See the Quick Start Guide and Section 22.2 on page 204. 2 Make sure the NWA/WAC is connected to a broadband modem or router with Internet access and your computer is set to obtain an dynamic IP address. NWA / WAC Series Users Guide 206 Chapter 22 Troubleshooting 3 If you are trying to access the Internet wirelessly, make sure the wireless settings on the wireless client are the same as the settings on the NWA/WAC. 4 Disconnect all the cables from your device, and follow the directions in the Quick Start Guide again. 5 If the problem continues, contact your ISP. I cannot access the Internet anymore. I had access to the Internet (with the NWA/WAC), but my Internet connection is not available anymore. 1 Check the hardware connections, and make sure the LED is behaving as expected. See the Quick Start Guide and Section 1.6 on page 25. 2 3 Reboot the NWA/WAC. If the problem continues, contact your ISP. The Internet connection is slow or intermittent. 1 There might be a lot of traffic on the network. Look at the LED, and check Section 1.6 on page 25. If the NWA/WAC is sending or receiving a lot of information, try closing some programs that use the Internet, especially peer-to-peer applications. 2 Check the signal strength. If the signal is weak, try moving the NWA/WAC closer to the NWA/WAC (if possible), and look around to see if there are any devices that might be interfering with the wireless network (microwaves, other wireless networks, and so on). 3 4 Reboot the NWA/WAC. If the problem continues, contact the network administrator or vendor, or try one of the advanced suggestions. Advanced Suggestions Check the settings for QoS. If it is disabled, you might consider activating it. If it is enabled, you might consider raising or lowering the priority for some applications. 22.5 Wireless Connections I cannot access the NWA/WAC or ping any computer from the WLAN. 1 Make sure the wireless LAN (wireless radio) is enabled on the NWA/WAC. NWA / WAC Series Users Guide 207 Chapter 22 Troubleshooting 2 Make sure the radio or at least one of the NWA/WACs radios is operating in AP mode. 3 Make sure the wireless adapter (installed on your computer) is working properly. 4 Make sure the wireless adapter (installed on your computer) is IEEE 802.11 compatible and supports the same wireless standard as the NWA/WACs active radio. 5 Make sure your computer (with a wireless adapter installed) is within the transmission range of the NWA/
WAC. 6 Check that both the NWA/WAC and your computer are using the same wireless and wireless security settings. Hackers have accessed my WEP-encrypted wireless LAN. WEP is extremely insecure. Its encryption can be broken by an attacker, using widely-available software. It is strongly recommended that you use a more effective security mechanism. Use the strongest security mechanism that all the wireless devices in your network support. WPA2 or WPA2-PSK is recommended. The wireless security is not following the re-authentication timer setting I specified. If a RADIUS server authenticates wireless stations, the re-authentication timer on the RADIUS server has priority. Change the RADIUS servers configuration if you need to use a different re-authentication timer setting. I cannot get a certificate to import into the NWA/WAC. 1 2 For My Certificates, you can import a certificate that matches a corresponding certification request that was generated by the NWA/WAC. You can also import a certificate in PKCS#12 format, including the certificates public and private keys. You must remove any spaces from the certificates filename before you can import the certificate. 3 Any certificate that you want to import has to be in one of these file formats:
Binary X.509: This is an ITU-T recommendation that defines the formats for X.509 certificates. PEM (Base-64) encoded X.509: This Privacy Enhanced Mail format uses lowercase letters, uppercase letters and numerals to convert a binary X.509 certificate into a printable form. Binary PKCS#7: This is a standard that defines the general syntax for data (including digital signatures) that may be encrypted. A PKCS #7 file is used to transfer a public key certificate. The private key is not included. The NWA/WAC currently allows the importation of a PKS#7 file that contains a single certificate. PEM (Base-64) encoded PKCS#7: This Privacy Enhanced Mail (PEM) format uses lowercase letters, uppercase letters and numerals to convert a binary PKCS#7 certificate into a printable form. NWA / WAC Series Users Guide 208 Chapter 22 Troubleshooting Binary PKCS#12: This is a format for transferring public key and private key certificates.The private key in a PKCS #12 file is within a password-encrypted envelope. The files password is not connected to your certificates public or private passwords. Exporting a PKCS #12 file creates this and you must provide it to decrypt the contents when you import the file into the NWA/WAC. Note: Be careful not to convert a binary file to text during the transfer process. It is easy for this to occur since many programs use text files by default. I can only see newer logs. Older logs are missing. When a log reaches the maximum number of log messages, new log messages automatically overwrite existing log messages, starting with the oldest existing log message first. The commands in my configuration file or shell script are not working properly. In a configuration file or shell script, use # or ! as the first character of a command line to have the NWA/WAC treat the line as a comment. Your configuration files or shell scripts can use exit or a command line consisting of a single ! to have the NWA/WAC exit sub command mode. Include write commands in your scripts. Otherwise the changes will be lost when the NWA/WAC restarts. You could use multiple write commands in a long script. Note: exit or !' must follow sub commands if it is to make the NWA/WAC exit sub command mode. I cannot get the firmware uploaded using the commands. The Web Configurator is the recommended method for uploading firmware. You only need to use the command line interface if you need to recover the firmware. See the CLI Reference Guide for how to determine if you need to recover the firmware and how to recover it. Wireless clients are not being load balanced among my APs. Make sure that all the APs used by the wireless clients in question share the same SSID, security, and radio settings. Make sure that all the APs are in the same broadcast domain. Make sure that the wireless clients are in range of the other APs; if they are only in range of a single AP, then load balancing may not be as effective. NWA / WAC Series Users Guide 209 Chapter 22 Troubleshooting In the Monitor > Wireless > AP Information > Radio List screen, there is no load balancing indicator associated with any APs assigned to the load balancing task. Check to be sure that the AP profile which contains the load balancing settings is correctly assigned to the APs in question. The load balancing task may have been terminated because further load balancing on the APs in question is no longer required. How do I remove the WAC6500 series indoor AP from its mounting bracket?
Find the down arrow close to the Ethernet ports, then use a thin flat tool (for example, a flat screw driver) to lift up a clip beneath the down arrow. Turn the WAC6500 series indoor AP counter-clockwise. NWA / WAC Series Users Guide 210 Chapter 22 Troubleshooting Detach the WAC6500 series indoor AP from the mounting bracket. How do I remove the NWA1123-AC PRO and WAC6103D-I indoor AP from its mounting bracket?
Find the down arrow close to the Ethernet ports, then use a thin flat tool (for example, a flat screw driver) to lift up a clip beneath 5GHz LED. NWA / WAC Series Users Guide 211 Chapter 22 Troubleshooting Turn the NWA1123-AC PRO or WAC6103D-I indoor AP counter-clockwise to detach it from the mounting bracket. 22.6 Resetting the NWA/WAC If you cannot access the NWA/WAC by any method, try restarting it by turning the power off and then on again. If you still cannot access the NWA/WAC by any method or you forget the administrator password(s), you can reset the NWA/WAC to its factory-default settings. Any configuration files or shell scripts that you saved on the NWA/WAC should still be available afterwards. Use the following procedure to reset the NWA/WAC to its factory-default settings. This overwrites the settings in the startup-config.conf file with the settings in the system-default.conf file. Note: This procedure removes the current configuration. NWA / WAC Series Users Guide 212 Chapter 22 Troubleshooting 1 Make sure the Power LED is on and not blinking. 2 3 Press the RESET button and hold it until the Power LED begins to blink. (This usually takes about ten seconds.) Release the RESET button, and wait for the NWA/WAC to restart. You should be able to access the NWA/WAC using the default settings. 22.7 Getting More Troubleshooting Help Search for support information for your model at www.zyxel.com for more troubleshooting suggestions. NWA / WAC Series Users Guide 213 APPENDIX A Importing Certificates This appendix shows you how to import public key certificates into your web browser. Public key certificates are used by web browsers to ensure that a secure web site is legitimate. When a certificate authority such as VeriSign, Comodo, or Network Solutions, to name a few, receives a certificate request from a website operator, they confirm that the web domain and contact information in the request match those on public record with a domain name registrar. If they match, then the certificate is issued to the website operator, who then places it on the site to be issued to all visiting web browsers to let them know that the site is legitimate. Many Zyxel products, such as the NWA/WAC, issue their own public key certificates. These can be used by web browsers on a LAN or WAN to verify that they are in fact connecting to the legitimate device and not one masquerading as it. However, because the certificates were not issued by one of the several organizations officially recognized by the most common web browsers, you will need to import the Zyxel-created certificate into your web browser and flag that certificate as a trusted authority. Note: You can see if you are browsing on a secure website if the URL in your web browsers address bar begins with https:// or there is a sealed padlock icon (
) somewhere in the main browser window (not all browsers show the padlock in the same location). Internet Explorer The following example uses Microsoft Internet Explorer 7 on Windows XP Professional; however, they can also apply to Internet Explorer on Windows Vista. NWA / WAC Series Users Guide 214 Appendix A Importing Certificates 1 If your devices Web Configurator is set to use SSL certification, then the first time you browse to it you are presented with a certification error. 2 Click Continue to this website (not recommended). 3 In the Address Bar, click Certificate Error > View certificates. NWA / WAC Series Users Guide 215 Appendix A Importing Certificates 4 In the Certificate dialog box, click Install Certificate. 5 In the Certificate Import Wizard, click Next. NWA / WAC Series Users Guide 216 Appendix A Importing Certificates 6 If you want Internet Explorer to Automatically select certificate store based on the type of certificate, click Next again and then go to step 9. 7 Otherwise, select Place all certificates in the following store and then click Browse. 8 In the Select Certificate Store dialog box, choose a location in which to save the certificate and then click OK. NWA / WAC Series Users Guide 217 Appendix A Importing Certificates 9 In the Completing the Certificate Import Wizard screen, click Finish. 10 If you are presented with another Security Warning, click Yes. 11 Finally, click OK when presented with the successful certificate installation message. NWA / WAC Series Users Guide 218 Appendix A Importing Certificates 12 The next time you start Internet Explorer and go to a Zyxel Web Configurator page, a sealed padlock icon appears in the address bar. Click it to view the pages Website Identification information. Installing a Stand-Alone Certificate File in Internet Explorer Rather than browsing to a Zyxel Web Configurator and installing a public key certificate when prompted, you can install a stand-alone certificate file if one has been issued to you. 1 Double-click the public key certificate file. 2 In the security warning dialog box, click Open. 3 Refer to steps 4-12 in the Internet Explorer procedure beginning on page 214 to complete the installation process. NWA / WAC Series Users Guide 219 Appendix A Importing Certificates Removing a Certificate in Internet Explorer This section shows you how to remove a public key certificate in Internet Explorer 7 on Windows XP. 1 Open Internet Explorer and click Tools > Internet Options. 2 In the Internet Options dialog box, click Content > Certificates. NWA / WAC Series Users Guide 220 Appendix A Importing Certificates 3 In the Certificates dialog box, click the Trusted Root Certificates Authorities tab, select the certificate that you want to delete, and then click Remove. 4 In the Certificates confirmation, click Yes. 5 In the Root Certificate Store dialog box, click Yes. 6 The next time you go to the web site that issued the public key certificate you just removed, a certification error appears. NWA / WAC Series Users Guide 221 Appendix A Importing Certificates Firefox 1 2 The following example uses Mozilla Firefox 2 on Windows XP Professional; however, the screens can also apply to Firefox 2 on all platforms. If your devices Web Configurator is set to use SSL certification, then the first time you browse to it you are presented with a certification error. Select Accept this certificate permanently and click OK. 3 The certificate is stored and you can now connect securely to the Web Configurator. A sealed padlock appears in the address bar, which you can click to open the Page Info > Security window to view the web pages security information. NWA / WAC Series Users Guide 222 Appendix A Importing Certificates Installing a Stand-Alone Certificate File in Firefox Rather than browsing to a Zyxel Web Configurator and installing a public key certificate when prompted, you can install a stand-alone certificate file if one has been issued to you. 1 Open Firefox and click Tools > Options. 2 In the Options dialog box, click Advanced > Encryption > View Certificates. NWA / WAC Series Users Guide 223 Appendix A Importing Certificates 3 In the Certificate Manager dialog box, click Web Sites > Import. 4 Use the Select File dialog box to locate the certificate and then click Open. 5 The next time you visit the web site, click the padlock in the address bar to open the Page Info > Security window to see the web pages security information. Removing a Certificate in Firefox This section shows you how to remove a public key certificate in Firefox 2. NWA / WAC Series Users Guide 224 Appendix A Importing Certificates 1 Open Firefox and click Tools > Options. 2 In the Options dialog box, click Advanced > Encryption > View Certificates. NWA / WAC Series Users Guide 225 Appendix A Importing Certificates 3 In the Certificate Manager dialog box, select the Web Sites tab, select the certificate that you want to remove, and then click Delete. 4 In the Delete Web Site Certificates dialog box, click OK. 5 The next time you go to the web site that issued the public key certificate you just removed, a certification error appears. NWA / WAC Series Users Guide 226 APPENDIX B IPv6 Overview IPv6 (Internet Protocol version 6), is designed to enhance IP address size and features. The increase in IPv6 address size to 128 bits (from the 32-bit IPv4 address) allows up to 3.4 x 1038 IP addresses. IPv6 Addressing The 128-bit IPv6 address is written as eight 16-bit hexadecimal blocks separated by colons (:). This is an example IPv6 address 2001:0db8:1a2b:0015:0000:0000:1a2f:0000. IPv6 addresses can be abbreviated in two ways:
Leading zeros in a block can be omitted. So 2001:0db8:1a2b:0015:0000:0000:1a2f:0000 can be written as 2001:db8:1a2b:15:0:0:1a2f:0. Any number of consecutive blocks of zeros can be replaced by a double colon. A double colon can only appear once in an IPv6 address. So 2001:0db8:0000:0000:1a2f:0000:0000:0015 can be written as 2001:0db8::1a2f:0000:0000:0015, 2001:0db8:0000:0000:1a2f::0015, 2001:db8::1a2f:0:0:15 or 2001:db8:0:0:1a2f::15. Prefix and Prefix Length Similar to an IPv4 subnet mask, IPv6 uses an address prefix to represent the network address. An IPv6 prefix length specifies how many most significant bits (start from the left) in the address compose the network address. The prefix length is written as /x where x is a number. For example, 2001:db8:1a2b:15::1a2f:0/32 means that the first 32 bits (2001:db8) is the subnet prefix. Link-local Address A link-local address uniquely identifies a device on the local network (the LAN). It is similar to a private IP address in IPv4. You can have the same link-local address on multiple interfaces on a device. A link-
local unicast address has a predefined prefix of fe80::/10. The link-local unicast address format is as follows. Table 92 Link-local Unicast Address Format 1111 1110 10 10 bits 0 54 bits Interface ID 64 bits Global Address A global address uniquely identifies a device on the Internet. It is similar to a public IP address in IPv4. A global unicast address starts with a 2 or 3. NWA / WAC Series Users Guide 227 Appendix B IPv6 Unspecified Address An unspecified address (0:0:0:0:0:0:0:0 or ::) is used as the source address when a device does not have its own address. It is similar to 0.0.0.0 in IPv4. Loopback Address A loopback address (0:0:0:0:0:0:0:1 or ::1) allows a host to send packets to itself. It is similar to 127.0.0.1 in IPv4. Multicast Address In IPv6, multicast addresses provide the same functionality as IPv4 broadcast addresses. Broadcasting is not supported in IPv6. A multicast address allows a host to send packets to all hosts in a multicast group. Multicast scope allows you to determine the size of the multicast group. A multicast address has a predefined prefix of ff00::/8. The following table describes some of the predefined multicast addresses. Table 93 Predefined Multicast Address MULTICAST ADDRESS FF01:0:0:0:0:0:0:1 FF01:0:0:0:0:0:0:2 FF02:0:0:0:0:0:0:1 FF02:0:0:0:0:0:0:2 FF05:0:0:0:0:0:0:2 FF05:0:0:0:0:0:1:3 DESCRIPTION All hosts on a local node. All routers on a local node. All hosts on a local connected link. All routers on a local connected link. All routers on a local site. All DHCP severs on a local site. The following table describes the multicast addresses which are reserved and can not be assigned to a multicast group. Table 94 Reserved Multicast Address MULTICAST ADDRESS FF00:0:0:0:0:0:0:0 FF01:0:0:0:0:0:0:0 FF02:0:0:0:0:0:0:0 FF03:0:0:0:0:0:0:0 FF04:0:0:0:0:0:0:0 FF05:0:0:0:0:0:0:0 FF06:0:0:0:0:0:0:0 FF07:0:0:0:0:0:0:0 FF08:0:0:0:0:0:0:0 FF09:0:0:0:0:0:0:0 FF0A:0:0:0:0:0:0:0 FF0B:0:0:0:0:0:0:0 FF0C:0:0:0:0:0:0:0 FF0D:0:0:0:0:0:0:0 FF0E:0:0:0:0:0:0:0 FF0F:0:0:0:0:0:0:0 NWA / WAC Series Users Guide 228 Appendix B IPv6 Subnet Masking Both an IPv6 address and IPv6 subnet mask compose of 128-bit binary digits, which are divided into eight 16-bit blocks and written in hexadecimal notation. Hexadecimal uses four bits for each character
(1 ~ 10, A ~ F). Each blocks 16 bits are then represented by four hexadecimal characters. For example, FFFF:FFFF:FFFF:FFFF:FC00:0000:0000:0000. Interface ID In IPv6, an interface ID is a 64-bit identifier. It identifies a physical interface (for example, an Ethernet port) or a virtual interface (for example, the management IP address for a VLAN). One interface should have a unique interface ID. EUI-64 The EUI-64 (Extended Unique Identifier) defined by the IEEE (Institute of Electrical and Electronics Engineers) is an interface ID format designed to adapt with IPv6. It is derived from the 48-bit (6-byte) Ethernet MAC address as shown next. EUI-64 inserts the hex digits fffe between the third and fourth bytes of the MAC address and complements the seventh bit of the first byte of the MAC address. See the following example. Table 95 MAC Table 96 EUI-64 00
: 13
: 49
: 12
: 34
: 56 02
: 13
: 49
: FF
: FE
: 12
: 34
: 56 Stateless Autoconfiguration With stateless autoconfiguration in IPv6, addresses can be uniquely and automatically generated. Unlike DHCPv6 (Dynamic Host Configuration Protocol version six) which is used in IPv6 stateful autoconfiguration, the owner and status of addresses dont need to be maintained by a DHCP server. Every IPv6 device is able to generate its own and unique IP address automatically when IPv6 is initiated on its interface. It combines the prefix and the interface ID (generated from its own Ethernet MAC address, see Interface ID and EUI-64) to form a complete IPv6 address. When IPv6 is enabled on a device, its interface automatically generates a link-local address (beginning with fe80). When the interface is connected to a network with a router and the NWA/WAC is set to automatically obtain an IPv6 network prefix from the router for the interface, it generates 1another address which combines its interface ID and global and subnet information advertised from the router. This is a routable global IP address. DHCPv6 The Dynamic Host Configuration Protocol for IPv6 (DHCPv6, RFC 3315) is a server-client protocol that allows a DHCP server to assign and pass IPv6 network addresses, prefixes and other configuration information to DHCP clients. DHCPv6 servers and clients exchange DHCP messages using UDP. 1. In IPv6, all network interfaces can be associated with several addresses. NWA / WAC Series Users Guide 229 Appendix B IPv6 Each DHCP client and server has a unique DHCP Unique IDentifier (DUID), which is used for identification when they are exchanging DHCPv6 messages. The DUID is generated from the MAC address, time, vendor assigned ID and/or the vendor's private enterprise number registered with the IANA. It should not change over time even after you reboot the device. Identity Association An Identity Association (IA) is a collection of addresses assigned to a DHCP client, through which the server and client can manage a set of related IP addresses. Each IA must be associated with exactly one interface. The DHCP client uses the IA assigned to an interface to obtain configuration from a DHCP server for that interface. Each IA consists of a unique IAID and associated IP information. The IA type is the type of address in the IA. Each IA holds one type of address. IA_NA means an identity association for non-temporary addresses and IA_TA is an identity association for temporary addresses. An IA_NA option contains the T1 and T2 fields, but an IA_TA option does not. The DHCPv6 server uses T1 and T2 to control the time at which the client contacts with the server to extend the lifetimes on any addresses in the IA_NA before the lifetimes expire. After T1, the client sends the server (S1) (from which the addresses in the IA_NA were obtained) a Renew message. If the time T2 is reached and the server does not respond, the client sends a Rebind message to any available server (S2). For an IA_TA, the client may send a Renew or Rebind message at the client's discretion. T1 T2 Renew to S1 Renew to S1 Renew to S1 Renew to S1 Renew to S1 Renew to S1 Rebind to S2 Rebind to S2 DHCP Relay Agent A DHCP relay agent is on the same network as the DHCP clients and helps forward messages between the DHCP server and clients. When a client cannot use its link-local address and a well-known multicast address to locate a DHCP server on its network, it then needs a DHCP relay agent to send a message to a DHCP server that is not attached to the same network. The DHCP relay agent can add the remote identification (remote-ID) option and the interface-ID option to the Relay-Forward DHCPv6 messages. The remote-ID option carries a user-defined string, such as the system name. The interface-ID option provides slot number, port information and the VLAN ID to the DHCPv6 server. The remote-ID option (if any) is stripped from the Relay-Reply messages before the relay agent sends the packets to the clients. The DHCP server copies the interface-ID option from the Relay-
Forward message into the Relay-Reply message and sends it to the relay agent. The interface-ID should not change even after the relay agent restarts. Prefix Delegation Prefix delegation enables an IPv6 router to use the IPv6 prefix (network address) received from the ISP (or a connected uplink router) for its LAN. The NWA/WAC uses the received IPv6 prefix (for example, 2001:db2::/48) to generate its LAN IP address. Through sending Router Advertisements (RAs) regularly by multicast, the NWA/WAC passes the IPv6 prefix information to its LAN hosts. The hosts then can use the prefix to generate their IPv6 addresses. NWA / WAC Series Users Guide 230 Appendix B IPv6 ICMPv6 Internet Control Message Protocol for IPv6 (ICMPv6 or ICMP for IPv6) is defined in RFC 4443. ICMPv6 has a preceding Next Header value of 58, which is different from the value used to identify ICMP for IPv4. ICMPv6 is an integral part of IPv6. IPv6 nodes use ICMPv6 to report errors encountered in packet processing and perform other diagnostic functions, such as "ping". Neighbor Discovery Protocol (NDP) The Neighbor Discovery Protocol (NDP) is a protocol used to discover other IPv6 devices and track neighbors reachability in a network. An IPv6 device uses the following ICMPv6 messages types:
Neighbor solicitation: A request from a host to determine a neighbors link-layer address (MAC address) and detect if the neighbor is still reachable. A neighbor being reachable means it responds to a neighbor solicitation message (from the host) with a neighbor advertisement message. Neighbor advertisement: A response from a node to announce its link-layer address. Router solicitation: A request from a host to locate a router that can act as the default router and forward packets. Router advertisement: A response to a router solicitation or a periodical multicast advertisement from a router to advertise its presence and other parameters. IPv6 Cache An IPv6 host is required to have a neighbor cache, destination cache, prefix list and default router list. The NWA/WAC maintains and updates its IPv6 caches constantly using the information from response messages. In IPv6, the NWA/WAC configures a link-local address automatically, and then sends a neighbor solicitation message to check if the address is unique. If there is an address to be resolved or verified, the NWA/WAC also sends out a neighbor solicitation message. When the NWA/WAC receives a neighbor advertisement in response, it stores the neighbors link-layer address in the neighbor cache. When the NWA/WAC uses a router solicitation message to query for a router and receives a router advertisement message, it adds the routers information to the neighbor cache, prefix list and destination cache. The NWA/WAC creates an entry in the default router list cache if the router can be used as a default router. When the NWA/WAC needs to send a packet, it first consults the destination cache to determine the next hop. If there is no matching entry in the destination cache, the NWA/WAC uses the prefix list to determine whether the destination address is on-link and can be reached directly without passing through a router. If the address is onlink, the address is considered as the next hop. Otherwise, the NWA/
WAC determines the next-hop from the default router list or routing table. Once the next hop IP address is known, the NWA/WAC looks into the neighbor cache to get the link-layer address and sends the packet when the neighbor is reachable. If the NWA/WAC cannot find an entry in the neighbor cache or the state for the neighbor is not reachable, it starts the address resolution process. This helps reduce the number of IPv6 solicitation and advertisement messages. Multicast Listener Discovery The Multicast Listener Discovery (MLD) protocol (defined in RFC 2710) is derived from IPv4's Internet Group Management Protocol version 2 (IGMPv2). MLD uses ICMPv6 message types, rather than IGMP message types. MLDv1 is equivalent to IGMPv2 and MLDv2 is equivalent to IGMPv3. NWA / WAC Series Users Guide 231 Appendix B IPv6 MLD allows an IPv6 switch or router to discover the presence of MLD listeners who wish to receive multicast packets and the IP addresses of multicast groups the hosts want to join on its network. MLD snooping and MLD proxy are analogous to IGMP snooping and IGMP proxy in IPv4. MLD filtering controls which multicast groups a port can join. MLD Messages A multicast router or switch periodically sends general queries to MLD hosts to update the multicast forwarding table. When an MLD host wants to join a multicast group, it sends an MLD Report message for that address. An MLD Done message is equivalent to an IGMP Leave message. When an MLD host wants to leave a multicast group, it can send a Done message to the router or switch. The router or switch then sends a group-specific query to the port on which the Done message is received to determine if other devices connected to this port should remain in the group. Example - Enabling IPv6 on Windows XP/2003/Vista By default, Windows XP and Windows 2003 support IPv6. This example shows you how to use the ipv6 install command on Windows XP/2003 to enable IPv6. This also displays how to use the ipconfig command to see auto-generated IP addresses. C:\>ipv6 install Installing... Succeeded. C:\>ipconfig Windows IP Configuration Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
IP Address. : 10.1.1.46 Subnet Mask . : 255.255.255.0 IP Address. : fe80::2d0:59ff:feb8:103c%4 Default Gateway . : 10.1.1.254 IPv6 is installed and enabled by default in Windows Vista. Use the ipconfig command to check your automatic configured IPv6 address as well. You should see at least one IPv6 address available for the interface on your computer. Example - Enabling DHCPv6 on Windows XP Windows XP does not support DHCPv6. If your network uses DHCPv6 for IP address assignment, you have to additionally install a DHCPv6 client software on your Windows XP. (Note: If you use static IP addresses or Router Advertisement for IPv6 address assignment in your network, ignore this section.) This example uses Dibbler as the DHCPv6 client. To enable DHCPv6 client on your computer:
NWA / WAC Series Users Guide 232 Appendix B IPv6 1 Install Dibbler and select the DHCPv6 client option on your computer. 2 After the installation is complete, select Start > All Programs > Dibbler-DHCPv6 > Client Install as service. 3 Select Start > Control Panel > Administrative Tools > Services. 4 Double click Dibbler - a DHCPv6 client. 5 Click Start and then OK. 6 Now your computer can obtain an IPv6 address from a DHCPv6 server. Example - Enabling IPv6 on Windows 7 Windows 7 supports IPv6 by default. DHCPv6 is also enabled when you enable IPv6 on a Windows 7 computer. To enable IPv6 in Windows 7:
NWA / WAC Series Users Guide 233 Appendix B IPv6 1 2 Select Control Panel > Network and Sharing Center > Local Area Connection. Select the Internet Protocol Version 6 (TCP/IPv6) checkbox to enable it. 3 Click OK to save the change. 4 Click Close to exit the Local Area Connection Status screen. 5 6 Select Start > All Programs > Accessories > Command Prompt. Use the ipconfig command to check your dynamic IPv6 address. This example shows a global address
(2001:b021:2d::1000) obtained from a DHCP server. C:\>ipconfig Windows IP Configuration Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
IPv6 Address. : 2001:b021:2d::1000 Link-local IPv6 Address . : fe80::25d8:dcab:c80a:5189%11 IPv4 Address. : 172.16.100.61 Subnet Mask . : 255.255.255.0 Default Gateway . : fe80::213:49ff:feaa:7125%11 172.16.100.254 NWA / WAC Series Users Guide 234 APPENDIX C Customer Support In the event of problems that cannot be solved by using this manual, you should contact your vendor. If you cannot contact your vendor, then contact a Zyxel office for the region in which you bought the device. See http://www.zyxel.com/homepage.shtml and also http://www.zyxel.com/about_zyxel/zyxel_worldwide.shtml for the latest information. Please have the following information ready when you contact an office. Required Information Product model and serial number. Warranty Information. Date that you received your device. Brief description of the problem and the steps you took to solve it. Corporate Headquarters (Worldwide) Taiwan Zyxel Communications Corporation http://www.zyxel.com Asia China Zyxel Communications (Shanghai) Corp. Zyxel Communications (Beijing) Corp. Zyxel Communications (Tianjin) Corp. http://www.zyxel.cn India Zyxel Technology India Pvt Ltd http://www.zyxel.in Kazakhstan Zyxel Kazakhstan http://www.zyxel.kz NWA / WAC Series Users Guide 235 Appendix C Customer Support Korea Zyxel Korea Corp. http://www.zyxel.kr Malaysia Zyxel Malaysia Sdn Bhd. http://www.zyxel.com.my Pakistan Zyxel Pakistan (Pvt.) Ltd. http://www.zyxel.com.pk Philippines Zyxel Philippines http://www.zyxel.com.ph Singapore Zyxel Singapore Pte Ltd. http://www.zyxel.com.sg Taiwan Zyxel Communications Corporation http://www.zyxel.com/tw/zh/
Thailand Zyxel Thailand Co., Ltd http://www.zyxel.co.th Vietnam Zyxel Communications Corporation-Vietnam Office http://www.zyxel.com/vn/vi Europe Austria Zyxel Deutschland GmbH http://www.zyxel.de Belarus Zyxel BY http://www.zyxel.by NWA / WAC Series Users Guide 236 Appendix C Customer Support Belgium Zyxel Communications B.V. http://www.zyxel.com/be/nl/
http://www.zyxel.com/be/fr/
Bulgaria Zyxel http://www.zyxel.com/bg/bg/
Czech Republic Zyxel Communications Czech s.r.o http://www.zyxel.cz Denmark Zyxel Communications A/S http://www.zyxel.dk Estonia Zyxel Estonia http://www.zyxel.com/ee/et/
Finland Zyxel Communications http://www.zyxel.fi France Zyxel France http://www.zyxel.fr Germany Zyxel Deutschland GmbH http://www.zyxel.de Hungary Zyxel Hungary & SEE http://www.zyxel.hu Italy Zyxel Communications Italy http://www.zyxel.it/
NWA / WAC Series Users Guide 237 Appendix C Customer Support Latvia Zyxel Latvia http://www.zyxel.com/lv/lv/homepage.shtml Lithuania Zyxel Lithuania http://www.zyxel.com/lt/lt/homepage.shtml Netherlands Zyxel Benelux http://www.zyxel.nl Norway Zyxel Communications http://www.zyxel.no Poland Zyxel Communications Poland http://www.zyxel.pl Romania Zyxel Romania http://www.zyxel.com/ro/ro Russia Zyxel Russia http://www.zyxel.ru Slovakia Zyxel Communications Czech s.r.o. organizacna zlozka http://www.zyxel.sk Spain Zyxel Communications ES Ltd http://www.zyxel.es Sweden Zyxel Communications http://www.zyxel.se Switzerland Studerus AG NWA / WAC Series Users Guide 238 Appendix C Customer Support http://www.zyxel.ch/
Turkey Zyxel Turkey A.S. http://www.zyxel.com.tr UK Zyxel Communications UK Ltd. http://www.zyxel.co.uk Ukraine Zyxel Ukraine http://www.ua.zyxel.com Latin America Argentina Zyxel Communication Corporation http://www.zyxel.com/ec/es/
Brazil Zyxel Communications Brasil Ltda. https://www.zyxel.com/br/pt/
Ecuador Zyxel Communication Corporation http://www.zyxel.com/ec/es/
Middle East Israel Zyxel Communication Corporation http://il.zyxel.com/homepage.shtml Middle East Zyxel Communication Corporation http://www.zyxel.com/me/en/
NWA / WAC Series Users Guide 239 Appendix C Customer Support North America USA Zyxel Communications, Inc. - North America Headquarters http://www.zyxel.com/us/en/
Oceania Africa Australia Zyxel Communications Corporation http://www.zyxel.com/au/en/
South Africa Nology (Pty) Ltd. http://www.zyxel.co.za NWA / WAC Series Users Guide 240 APPENDIX D Legal Information Copyright Copyright 2017 by Zyxel Communications Corporation. The contents of this publication may not be reproduced in any part or as a whole, transcribed, stored in a retrieval system, translated into any language, or transmitted in any form or by any means, electronic, mechanical, magnetic, optical, chemical, photocopying, manual, or otherwise, without the prior written permission of Zyxel Communications Corporation. Published by Zyxel Communications Corporation. All rights reserved. Disclaimers Zyxel does not assume any liability arising out of the application or use of any products, or software described herein. Neither does it convey any license under its patent rights nor the patent rights of others. Zyxel further reserves the right to make changes in any products described herein without notice. This publication is subject to change without notice. Your use of the NWA/WAC is subject to the terms and conditions of any related service providers. Trademarks Trademarks mentioned in this publication are used for identification purposes only and may be properties of their respective owners. Regulatory Notice and Statement UNITED STATES of AMERICA The following information applies if you use the product within USA area. FCC EMC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
device.
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which is found by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna Increase the separation between the devices Connect the equipment to an outlet other than the receivers Consult a dealer or an experienced radio/TV technician for assistance FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. FCC Radiation Exposure Statement This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must be at least 20 cm from the user and must not be co-located or operating in conjunction with any other antenna or transmitter. This transmitter must be at least 22 cm (NWA5123-NI) from the user and must not be co-located or operating in conjunction with any other antenna or transmitter. This transmitter must be at least 30 cm (WAC6553D-E) from the user and must not be co-located or operating in conjunction with any other antenna or transmitter. Country Code selection feature to be disabled for products marketed to the US/CANADA. Operation of this device is restricted to indoor use only. (WAC6553D-E is a device for outdoor use.) CANADA The following information applies if you use the product within Canada area. NWA / WAC Series Users Guide 241 Appendix D Legal Information Industry Canada ICES Statement CAN ICES-3 (B)/NMB-3(B) Industry Canada RSS-GEN & RSS-247 Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This radio transmitter (2468C-NWA5123AC (NWA5123-AC, NWA1123-AC v2), 2468C-NWA5123ACHD (NWA5123-AC HD, NWA1123-AC HD), 2468C-NWA5123NI (NWA5123-NI), 2468C-WAC6502DE (WAC6502D-S, WAC6502D-E), 2468C-WAC6503DS (WAC6503D-S), 2468C-WAC6553DE
(WAC6553D-E), 2468C-WAC6103DI (WAC6103D-I), 2468C-WAC5302DS (WAC5302D-S)) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. NWA / WAC Series Users Guide 242 Appendix D Legal Information Antenna Information ANTENNA MODEL NO. 1 2 3 4 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 6 7 8 NWA5123-AC 2.4 GHz Antenna NWA5123-AC 5 GHz Antenna NWA5123-AC HD NWA5123-AC HD NWA5123-AC HD NWA5123-AC HD NWA5123-AC HD NWA1123-AC HD NWA1123-AC HD NWA1123-AC HD NWA1123-AC HD NWA1123-AC HD WAC6502D-E WAC6502D-S WAC6503D-S ZXL04-22008A SINBON / 2.4 G & 5 G Metal & PCB Antenna 81XCAL15.G01 81XCAL15.G02 AD751 A9701685 A9701686 A9701670 A9701671 TYPE PIFA PIFA PIFA PIFA PIFA PIFA Monopole Monopole Monopole PIFA PIFA Monopole Monopole Monopole Dipole Dipole Dipole Dipole PIFA PIFA PIFA Dipole Loop Loop Loop Dipole Loop Loop PIFA PCB PCB PCB PCB CONNECTOR 2.4 G GAIN 5G GAIN REMARK U.FL U.FL U.FL U.FL I-PEX I-PEX I-PEX I-PEX I-PEX I-PEX I-PEX I-PEX I-PEX I-PEX RSMA IPEX IPEX N type U.FL U.FL U.FL U.FL U.FL U.FL U.FL U.FL I-PEX I-PEX I-PEX U.FL U.FL U.FL U.FL 3.08 (2400-2483.5 MHz) 3.07 (2400-2483.5 MHz) 3 (2400-2483.5 MHz) 3 (2400-2483.5 MHz) 3 (2400-2483.5 MHz) 3 (2400-2483.5 MHz) 5 4 4 4.5 3.28 3.37 3.15 4.33 5.82 (2400-2483.5 MHz) 5.02 (2400-2483.5 MHz) 4.0 5.8 4.06 (5150-5250 MHz) 3.91 (5725-5850 MHz) 3.99 (5150-5250 MHz) 3.79 (5725-5850 MHz) 4 (5150-5250 MHz) 4 (5725-5850 MHz) 4 (5150-5250 MHz) 4 (5725-5850 MHz) 4 (5150-5250 MHz) 4 (5725-5850 MHz) 4 (5150-5250 MHz) 4 (5725-5850 MHz) 4 (5150-5250 MHz) 4 (5725-5850 MHz) 4 (5150-5250 MHz) 4 (5725-5850 MHz) 7 6 6 7 4.38 (5150-5250 MHz) 4.23 (5725-5850 MHz) 4.31 (5150-5250 MHz) 4.22 (5725-5850 MHz) 4.38 (5150-5250 MHz) 4.36 (5725-5850 MHz) 5.12 (5150-5250 MHz) 5.20 (5725-5850 MHz) 5 (5150-5250 MHz) 5 (5250-5350 MHz) 5 (5470-5725 MHz) 5 (5725-5850 MHz) 5.2 6.1 Ceiling Mounted:
Antenna 1, 2, 3 Wall Mounted:
Antenna 1, 2, 4 Ceiling Mounted:
Antenna 5, 6, 7 Wall Mounted:
Antenna 5, 6, 8 If the product with 5G wireless function operating in 5150-5250 MHz and 5725-5850 MHz, the following attention must be paid, The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate; and The worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in Section 6.2.2(3) of RSS 247 mobile satellite systems. shall be clearly indicated. NWA / WAC Series Users Guide 243 Appendix D Legal Information If the product with 5G wireless function operating in 5250-5350 MHz and 5470-5725 MHz, the following attention must be paid. For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes: (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Le prsent metteur radio (2468C-NWA5123AC (NWA5123-AC, NWA1123-AC v2), 2468C-NWA5123ACHD (NWA5123-AC HD, NWA1123-AC HD), 2468C-NWA5123NI (NWA5123-NI), 2468C-WAC6502DE (WAC6502D-S, WAC6502D-E), 2468C-WAC6503DS (WAC6503D-S), 2468C-
WAC6553DE (WAC6553D-E), 2468C-WAC6103DI (WAC6103D-I), 2468C-WAC5302DS (WAC5302D-S)) de modle s'il fait partie du matriel de catgorieI) a t approuv par Industrie Canada pour fonctionner avec les types d'antenne numrs ci-dessous et ayant un gain admissible maximal et l'impdance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour l'exploitation de l'metteur. NWA / WAC Series Users Guide 244 Appendix D Legal Information Informations Antenne MODLE D'ANTENNE NB. 1 2 3 4 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 6 7 8 NWA5123-AC 2.4 GHz Antenna NWA5123-AC 5 GHz Antenna NWA5123-AC HD NWA5123-AC HD NWA5123-AC HD NWA5123-AC HD NWA5123-AC HD NWA1123-AC HD NWA1123-AC HD NWA1123-AC HD NWA1123-AC HD NWA1123-AC HD WAC6502D-E WAC6502D-S WAC6503D-S ZXL04-22008A SINBON / 2.4 G & 5 G Metal & PCB Antenna 81XCAL15.G01 81XCAL15.G02 AD751 A9701685 A9701686 A9701670 A9701671 TYPE PIFA PIFA PIFA PIFA PIFA PIFA Monopole Monopole Monopole PIFA PIFA Monopole Monopole Monopole Dipole Dipole Dipole Dipole PIFA PIFA PIFA Dipole Loop Loop Loop Dipole Loop Loop PIFA PCB PCB PCB PCB CONNECTEUR 2.4 G GAIN 5G GAIN REMARQUE U.FL U.FL U.FL U.FL I-PEX I-PEX I-PEX I-PEX I-PEX I-PEX I-PEX I-PEX I-PEX I-PEX RSMA IPEX IPEX N type U.FL U.FL U.FL U.FL U.FL U.FL U.FL U.FL I-PEX I-PEX I-PEX U.FL U.FL U.FL U.FL 3.08 (2400-2483.5 MHz) 3.07 (2400-2483.5 MHz) 3 (2400-2483.5 MHz) 3 (2400-2483.5 MHz) 3 (2400-2483.5 MHz) 3 (2400-2483.5 MHz) 5 4 4 4.5 3.28 3.37 3.15 4.33 5.82 (2400-2483.5 MHz) 5.02 (2400-2483.5 MHz) 4.0 5.8 4.06 (5150-5250 MHz) 3.91 (5725-5850 MHz) 3.99 (5150-5250 MHz) 3.79 (5725-5850 MHz) 4 (5150-5250 MHz) 4 (5725-5850 MHz) 4 (5150-5250 MHz) 4 (5725-5850 MHz) 4 (5150-5250 MHz) 4 (5725-5850 MHz) 4 (5150-5250 MHz) 4 (5725-5850 MHz) 4 (5150-5250 MHz) 4 (5725-5850 MHz) 4 (5150-5250 MHz) 4 (5725-5850 MHz) 7 6 6 7 4.38 (5150-5250 MHz) 4.23 (5725-5850 MHz) 4.31 (5150-5250 MHz) 4.22 (5725-5850 MHz) 4.38 (5150-5250 MHz) 4.36 (5725-5850 MHz) 5.12 (5150-5250 MHz) 5.20 (5725-5850 MHz) 5 (5150-5250 MHz) 5 (5250-5350 MHz) 5 (5470-5725 MHz) 5 (5725-5850 MHz) 5.2 6.1 Ceiling Mounted:
Antenna 1, 2, 3 Wall Mounted:
Antenna 1, 2, 4 Ceiling Mounted:
Antenna 5, 6, 7 Wall Mounted:
Antenna 5, 6, 8 Lorsque la fonction sans fil 5G fonctionnant en 5150-5250 MHz and 5725-5850 MHz est active pour ce produit, il est ncessaire de porter une attention particulire aux choses suivantes Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;
Pour les dispositifs munis dantennes amovibles, le gain maximal d'antenne permis (pour les dispositifs utilisant la bande de 5 725 5 850 MHz) doit tre conforme la limite de la p.i.r.e. spcifie pour l'exploitation point point et lexploitation non point point, selon le cas;
NWA / WAC Series Users Guide 245 Appendix D Legal Information Les pires angles dinclinaison ncessaires pour rester conforme lexigence de la p.i.r.e. applicable au masque dlvation, et nonce la section 6.2.2 3) du CNR-247, doivent tre clairement indiqus. Lorsque la fonction sans fil 5G fonctionnant en 5250-5350 MHz et 5470-5725 MHz est active pour ce produit, il est ncessaire de porter une attention particulire aux choses suivantes. Pour les dispositifs munis dantennes amovibles, le gain maximal d'antenne permis pour les dispositifs utilisant les bandes de 5 250 5 350 MHz et de 5 470 5 725 MHz doit tre conforme la limite de la p.i.r.e. Industry Canada radiation exposure statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 22cm (NWA5123-NI, NWA5123-AC HD, NWA1123-AC HD) between the radiator and your body. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 30 cm (WAC6553D-E) between the radiator and your body. Dclaration dexposition aux radiations:
Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl.Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl.Cet quipement doit tre install et utilis avec un minimum de 22 cm (NWA5123-NI, NWA5123-AC HD, NWA1123-AC HD) de distance entre la source de rayonnement et votre corps. Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl.Cet quipement doit tre install et utilis avec un minimum de 30 cm (WAC6553D-E) de distance entre la source de rayonnement et votre corps. Caution:
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
(ii) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall comply with the e.i.r.p. limit; and
(iii) the maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate.
(iv) Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-
5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.
(v) WAC6553D-E is an outdoor device and only uses 5G Band 4 (5725-5850 MHz). Avertissement:
(i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;
(ii) le gain maximal dantenne permis pour les dispositifs utilisant les bandes 5250-5350 MHz et 5 470-5 725 MHz doit se conformer la limite de p.i.r.e.;
(iii) le gain maximal dantenne permis (pour les dispositifs utilisant la bande 5725-5825 MHz) doit se conformer la limite de p.i.r.e. spcifie pour lexploitation point point et non point point, selon le cas.
(iv) De plus, les utilisateurs devraient aussi tre aviss que les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--
d., quils ont la priorit) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.
(v) WAC6553D-E est un appareil exterieur et seulement utilise 5G Bane 4 (5725-5850 MHz). EUROPEAN UNION The following information applies if you use the product within the European Union. Declaration of Conformity with Regard to EU Directive 2014/53/EU (Radio Equipment Directive, RED) Compliance information for 2.4GHz and/or 5GHz wireless products relevant to the EU and other Countries following the EU Directive 2014/53/
EU (RED). And this product may be used in all EU countries (and other countries following the EU Directive 2014/53/EU) without any limitation except for the countries mentioned below table:
In the majority of the EU and other European countries, the 5GHz bands have been made available for the use of wireless local area networks (LANs). Later in this document you will find an overview of countries in which additional restrictions or requirements or both are applicable. The requirements for any country may evolve. Zyxel recommends that you check with the local authorities for the latest status of their national regulations for the 5GHz wireless LANs. If this device for operation in the band 5150-5350 MHz, it is for indoor use only. NWA5123-AC This equipment should be installed and operated with a minimum distance of 20 cm between the radio equipment and your body. The maximum RF power operating for each band as follows:
The band 2,400 to 2,483.5 MHz is 97.95 mW, The bands 5,150 MHz to 5,350 MHz is 199.07 mW, NWA / WAC Series Users Guide 246 Appendix D Legal Information The 5,470 MHz to 5,725 MHz is 743.02 mW. NWA1123-ACv2 This equipment should be installed and operated with a minimum distance of 20 cm between the radio equipment and your body. The maximum RF power operating for each band as follows:
The band 2,400 to 2,483.5 MHz is 97.95 mW, The bands 5,150 MHz to 5,350 MHz is 199.07 mW, The 5,470 MHz to 5,725 MHz is 743.02 mW. NWA5121-N This equipment should be installed and operated with a minimum distance of 20 cm between the radio equipment and your body. The maximum RF power operating for each band as follow:
The band 2,400 to 2,483.5 MHz is 84.72 mW, NWA5123-NI This equipment should be installed and operated with a minimum distance of 20 cm between the radio equipment and your body. The maximum RF power operating for each band as follows:
The band 2,400 to 2,483.5 MHz is 90.99 mW, The bands 5,150 MHz to 5,350 MHz is 183.65 mW, The 5,470 MHz to 5,725 MHz is 558.47 mW. NWA5301-NJ This equipment should be installed and operated with a minimum distance of 20 cm between the radio equipment and your body. The maximum RF power operating for each band as follows:
The band 2,400 to 2,483.5 MHz is 90.57 mW, WAC6503D-S This equipment should be installed and operated with a minimum distance of 20 cm between the radio equipment and your body. The maximum RF power operating for each band as follows:
The band 2,400 to 2,483.5 MHz is 99.54 mW, The bands 5,150 MHz to 5,350 MHz is 183.65 mW, The 5,470 MHz to 5,725 MHz is 941.89 mW. WAC6502D-S This equipment should be installed and operated with a minimum distance of 20 cm between the radio equipment and your body. The maximum RF power operating for each band as follows:
The band 2,400 to 2,483.5 MHz is 94.19 mW, The bands 5,150 MHz to 5,350 MHz is 194.98 mW, The 5,470 MHz to 5,725 MHz is 986.28 mW. WAC6502D-E This equipment should be installed and operated with a minimum distance of 20 cm between the radio equipment and your body. The maximum RF power operating for each band as follows:
The band 2,400 to 2,483.5 MHz is 94.19 mW, The bands 5,150 MHz to 5,350 MHz is 194.98 mW, The 5,470 MHz to 5,725 MHz is 986.28 mW. WAC6553D-E This equipment should be installed and operated with a minimum distance of 20 cm between the radio equipment and your body. The maximum RF power operating for each band as follows:
The band 2,400 to 2,483.5 MHz is 92.26 mW, The bands 5,150 MHz to 5,350 MHz is 198.61 mW, The 5,470 MHz to 5,725 MHz is 995.41 mW. WAC6103D-I This equipment should be installed and operated with a minimum distance of 20 cm between the radio equipment and your body. The maximum RF power operating for each band as follows:
The band 2,400 to 2,483.5 MHz is 92.68 mW, The bands 5,150 MHz to 5,350 MHz is 192.75 mW, The 5,470 MHz to 5,725 MHz is 966.05 mW. WAC5302D-S This equipment should be installed and operated with a minimum distance of 20 cm between the radio equipment and your body. The maximum RF power operating for each band as follows:
The band 2,400 to 2,483.5 MHz is 93.33 mW, The bands 5,150 MHz to 5,350 MHz is 192.31 mW, The 5,470 MHz to 5,725 MHz is 391.74 mW. NWA1123-AC PRO This equipment should be installed and operated with a minimum distance of 20 cm between the radio equipment and your body. The maximum RF power operating for each band as follows:
The band 2,400 to 2,483.5 MHz is 92.68 mW, The bands 5,150 MHz to 5,350 MHz is 192.75 mW, The 5,470 MHz to 5,725 MHz is 966.05 mW. NWA1123-AC HD This equipment should be installed and operated with a minimum distance of 20 cm between the radio equipment and your body. The maximum RF power operating for each band as follows:
The band 2,400 to 2,483.5 MHz is 97.274 mW, The bands 5,150 MHz to 5,350 MHz is 198.61 mW, The 5,470 MHz to 5,725 MHz is 995.40 mW. NWA / WAC Series Users Guide 247 Appendix D Legal Information NWA5123-AC HD This equipment should be installed and operated with a minimum distance of 20 cm between the radio equipment and your body. The maximum RF power operating for each band as follows:
The band 2,400 to 2,483.5 MHz is 97.274 mW, The bands 5,150 MHz to 5,350 MHz is 198.61 mW, The 5,470 MHz to 5,725 MHz is 995.40 mW.
(Bulgarian) Zyxel , 2014/53/C. National Restrictions The Belgian Institute for Postal Services and Telecommunications (BIPT) must be notified of any outdoor wireless link having a range exceeding 300 meters. Please check http://www.bipt.be for more details. Draadloze verbindingen voor buitengebruik en met een reikwijdte van meer dan 300 meter dienen aangemeld te worden bij het Belgisch Instituut voor postdiensten en telecommunicatie (BIPT). Zie http://www.bipt.be voor meer gegevens. Les liaisons sans fil pour une utilisation en extrieur dune distance suprieure 300 mtres doivent tre notifies lInstitut Belge des services Postaux et des Tlcommunications (IBPT). Visitez http://www.ibpt.be pour de plus amples dtails. Espaol
(Spanish) etina
(Czech) Dansk (Danish) Deutsch
(German) Eesti keel
(Estonian)
(Greek) English Franais
(French) Hrvatski
(Croatian) slenska
(Icelandic) Por medio de la presente Zyxel declara que el equipo cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 2014/53/UE.. Zyxel tmto prohlauje, e tento zazen je ve shod se zkladnmi poadavky a dalmi pslunmi ustanovenmi smrnice 2014/53/EU. Undertegnede Zyxel erklrer herved, at flgende udstyr udstyr overholder de vsentlige krav og vrige relevante krav i direktiv 2014/53/EU. National Restrictions In Denmark, the band 5150 - 5350 MHz is also allowed for outdoor usage. I Danmark m frekvensbndet 5150 - 5350 ogs anvendes udendrs. Hiermit erklrt Zyxel, dass sich das Gert Ausstattung in bereinstimmung mit den grundlegenden Anforderungen und den brigen einschlgigen Bestimmungen der Richtlinie 2014/53/EU befindet. Kesolevaga kinnitab Zyxel seadme seadmed vastavust direktiivi 2014/53/EU phinuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele stetele. Zyxel 2014/53/EU. Hereby, Zyxel declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Par la prsente Zyxel dclare que l'appareil quipements est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 2014/53/EU. Zyxel ovime izjavljuje da je radijska oprema tipa u skladu s Direktivom 2014/53/EU. Hr me lsir, Zyxel v yfir a essi bnaur er samrmi vi grunnkrfur og nnur vieigandi kvi tilskipunar 2014/53/
EU. Italiano (Italian) Con la presente Zyxel dichiara che questo attrezzatura conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 2014/53/EU. National Restrictions This product meets the National Radio Interface and the requirements specified in the National Frequency Allocation Table for Italy. Unless this wireless LAN product is operating within the boundaries of the owner's property, its use requires a general authorization. Please check http://www.sviluppoeconomico.gov.it/ for more details. Questo prodotto conforme alla specifiche di Interfaccia Radio Nazionali e rispetta il Piano Nazionale di ripartizione delle frequenze in Italia. Se non viene installato all 'interno del proprio fondo, l'utilizzo di prodotti Wireless LAN richiede una Autorizzazione Generale. Consultare http://www.sviluppoeconomico.gov.it/ per maggiori dettagli. Latvieu valoda
(Latvian) Lietuvi kalba
(Lithuanian) Magyar
(Hungarian) Malti (Maltese) Ar o Zyxel deklar, ka iekrtas atbilst Direktvas 2014/53/EU btiskajm prasbm un citiem ar to saisttajiem noteikumiem. National Restrictions The outdoor usage of the 2.4 GHz band requires an authorization from the Electronic Communications Office. Please 2.4 GHz frekvenu joslas izmantoanai rpus telpm nepiecieama atauja no Elektronisko sakaru direkcijas. Vairk check http://www.esd.lv for more details. informcijas: http://www.esd.lv. iuo Zyxel deklaruoja, kad is ranga atitinka esminius reikalavimus ir kitas 2014/53/EU Direktyvos nuostatas. Alulrott, Zyxel nyilatkozom, hogy a berendezs megfelel a vonatkoz alapvet kvetelmnyeknek s az 2014/53/EU irnyelv egyb elrsainak. Hawnhekk, Zyxel, jiddikjara li dan tagmir jikkonforma mal-tiijiet essenzjali u ma provvedimenti orajn relevanti li hemm fid-Dirrettiva 2014/53/EU. Nederlands
(Dutch) Hierbij verklaart Zyxel dat het toestel uitrusting in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 2014/53/EU. NWA / WAC Series Users Guide 248 Appendix D Legal Information Polski (Polish) Portugus
(Portuguese) Romn
(Romanian) Slovenina
(Slovak) Slovenina
(Slovene) Niniejszym Zyxel owiadcza, e sprzt jest zgodny z zasadniczymi wymogami oraz pozostaymi stosownymi postanowieniami Dyrektywy 2014/53/EU. Zyxel declara que este equipamento est conforme com os requisitos essenciais e outras disposies da Directiva 2014/53/
EU. Prin prezenta, Zyxel declar c acest echipament este n conformitate cu cerinele eseniale i alte prevederi relevante ale Directivei 2014/53/EU. Zyxel tmto vyhlasuje, e zariadenia spa zkladn poiadavky a vetky prslun ustanovenia Smernice 2014/53/EU. Zyxel izjavlja, da je ta oprema v skladu z bistvenimi zahtevami in ostalimi relevantnimi doloili direktive 2014/53/EU. Suomi (Finnish) Zyxel vakuuttaa tten ett laitteet tyyppinen laite on direktiivin 2014/53/EU oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen. Svenska
(Swedish) Hrmed intygar Zyxel att denna utrustning str I verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 2014/53/EU. Norsk
(Norwegian) Erklrer herved Zyxel at dette utstyret er I samsvar med de grunnleggende kravene og andre relevante bestemmelser I direktiv 2014/53/EU. Notes:
1. Although Norway, Switzerland and Liechtenstein are not EU member states, the EU Directive 2014/53/EU has also been implemented in those countries. 2. The regulatory limits for maximum output power are specified in EIRP. The EIRP level (in dBm) of a device can be calculated by adding the gain of the antenna used (specified in dBi) to the output power available at the connector (specified in dBm). List of national codes COUNTRY ISO 3166 2 LETTER CODE COUNTRY ISO 3166 2 LETTER CODE Austria Belgium Bulgaria Croatia Cyprus Czech Republic Denmark Estonia Finland France Germany Greece Hungary Iceland Ireland Italy Latvia AT BE BG HR CY CR DK EE FI FR DE GR HU IS IE IT LV Liechtenstein Lithuania Luxembourg Malta Netherlands Norway Poland Portugal Romania Serbia Slovakia Slovenia Spain Sweden Switzerland Turkey United Kingdom LI LT LU MT NL NO PL PT RO RS SK SI ES SE CH TR GB Professional installation instruction (WAC6553D-E) Please be advised that due to the unique function supplied by this product, the device is intended for use with our interactive entertainment software and licensed third-party only. The product will be distributed through controlled distribution channel and installed by trained professional and will not be sold directly to the general public through retail store. Installation personal This product is designed for specific application and needs to be installed by a qualified personal who has RF and related rule knowledge. The general user shall not attempt to install or change the setting. Installation location The product shall be installed at a location where the radiating antenna can be kept 30 cm from nearby person in normal operation condition to meet regulatory RF exposure requirement. External antenna Use only the antennas which have been approved by Zyxel Communications Corporation. The non-approved antenna(s) may produce unwanted spurious or excessive RF transmitting power which may lead to the violation of FCC/IC limit and is prohibited. Installation procedure 1 2 3 4 NWA / WAC Series Users Guide 249 Appendix D Legal Information 5 Please refer to user's manual for the detail. Warning Please carefully select the installation position and make sure that the final output power does not exceed the limit set force in relevant rules. The violation of the rule could lead to serious federal penalty. Instructions d'installation professionnelle (WAC6553D-E) Veuillez noter que l'appareil etant dedie a une fonction unique, il doit etre utilise avec notre logiciel proprietaire de divertissement interactif . Ce produit sera propose par un reseau de distribution controle et installe par des professionels; il ne sera pas propose au grand public par le reseau de la grande distribution. Installation Ce produit est destine a un usage specifique et doit etre installe par un personnel qualifie maitrisant les radiofrequences et les regles s'y rapportant. L'installation et les reglages ne doivent pas etre modifies par l'utilisateur final. Emplacement d'installation En usage normal, afin de respecter les exigences reglementaires concernant l'exposition aux radiofrequences, ce produit doit etre installe de facon a respecter une distance de 30 cm entre l'antenne emettrice et les personnes. Antenn externe. Utiliser uniiquement les antennes approuvees par le fabricant. L'utilisation d'autres antennes peut conduire a un niveau de rayonnement essentiel ou non essentiel depassant les niveaux limites definis par FCC/IC, ce qui est interdit. Procedure d'installation Consulter le manuel d'utilisation. Avertissement Choisir avec soin la position d'installation et s'assurer que la puissance de sortie ne depasse pas les limites en vigueur. La violation de cette regle peut conduire a de serieuses penalites federales. 1 2 3 4 5 Safety Warnings Do not use this product near water, for example, in a wet basement or near a swimming pool. Do not expose your device to dampness, dust or corrosive liquids. Do not store things on the device. Do not obstruct the device ventilation slots as insufficient airflow may harm your device. For example, do not place the device in an enclosed space such as a box or on a very soft surface such as a bed or sofa. Do not install, use, or service this device during a thunderstorm. There is a remote risk of electric shock from lightning. Connect ONLY suitable accessories to the device. Do not open the device or unit. Opening or removing covers can expose you to dangerous high voltage points or other risks. ONLY qualified service personnel should service or disassemble this device. Please contact your vendor for further information. Make sure to connect the cables to the correct ports. Place connecting cables carefully so that no one will step on them or stumble over them. Always disconnect all cables from this device before servicing or disassembling. Do not remove the plug and connect it to a power outlet by itself; always attach the plug to the power adaptor first before connecting it to Do not allow anything to rest on the power adaptor or cord and do NOT place the product where anyone can walk on the power adaptor a power outlet. or cord. Please use the provided or designated connection cables/power cables/adaptors. Connect it to the right supply voltage (for example, 110V AC in North America or 230V AC in Europe). If the power adaptor or cord is damaged, it might cause electrocution. Remove it from the device and the power source, repairing the power adapter or cord is prohibited. Contact your local vendor to order a new one. Do not use the device outside, and make sure all the connections are indoors. There is a remote risk of electric shock from lightning. CAUTION: Risk of explosion if battery is replaced by an incorrect type, dispose of used batteries according to the instruction. Dispose them at the applicable collection point for the recycling of electrical and electronic devices. For detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the store where you purchased the product. The following warning statements apply, where the disconnect device is not incorporated in the device or where the plug on the power supply cord is intended to serve as the disconnect device, For permanently connected devices, a readily accessible disconnect device shall be incorporated external to the device;
For pluggable devices, the socket-outlet shall be installed near the device and shall be easily accessible. Environment statement ErP (Energy-related Products) Zyxel products put on the EU market in compliance with the requirement of the European Parliament and the Council published Directive 2009/125/EC establishing a framework for the setting of ecodesign requirements for energy-related products (recast), so called as "ErP Directive (Energy-related Products directive) as well as ecodesign requirement laid down in applicable implementing measures, power consumption has satisfied regulation requirements which are:
Network standby power consumption < 8W, and/or Off mode power consumption < 0.5W, and/or Standby mode power consumption < 0.5W. For wireless setting, please refer to Chapter 7 on page 84 chapter for more detail. European Union - Disposal and Recycling Information The symbol below means that according to local regulations your product and/or its battery shall be disposed of separately from domestic waste. If this product is end of life, take it to a recycling station designated by local authorities. At the time of disposal, the separate collection of your product and/or its battery will help save natural resources and ensure that the environment is sustainable development. Die folgende Symbol bedeutet, dass Ihr Produkt und/oder seine Batterie gem den rtlichen Bestimmungen getrennt vom Hausmll entsorgt werden muss. Wenden Sie sich an eine Recyclingstation, wenn dieses Produkt das Ende seiner Lebensdauer erreicht hat. Zum Zeitpunkt der NWA / WAC Series Users Guide 250 Appendix D Legal Information Entsorgung wird die getrennte Sammlung von Produkt und/oder seiner Batterie dazu beitragen, natrliche Ressourcen zu sparen und die Umwelt und die menschliche Gesundheit zu schtzen. El smbolo de abajo indica que segn las regulaciones locales, su producto y/o su batera debern depositarse como basura separada de la domstica. Cuando este producto alcance el final de su vida til, llvelo a un punto limpio. Cuando llegue el momento de desechar el producto, la recogida por separado ste y/o su batera ayudar a salvar los recursos naturales y a proteger la salud humana y medioambiental. Le symbole ci-dessous signifie que selon les rglementations locales votre produit et/ou sa batterie doivent tre limins sparment des ordures mnagres. Lorsque ce produit atteint sa fin de vie, amenez-le un centre de recyclage. Au moment de la mise au rebut, la collecte spare de votre produit et/ou de sa batterie aidera conomiser les ressources naturelles et protger l'environnement et la sant humaine. Il simbolo sotto significa che secondo i regolamenti locali il vostro prodotto e/o batteria deve essere smaltito separatamente dai rifiuti domestici. Quando questo prodotto raggiunge la fine della vita di servizio portarlo a una stazione di riciclaggio. Al momento dello smaltimento, la raccolta separata del vostro prodotto e/o della sua batteria aiuta a risparmiare risorse naturali e a proteggere l'ambiente e la salute umana. Symbolen innebr att enligt lokal lagstiftning ska produkten och/eller dess batteri kastas separat frn hushllsavfallet. Nr den hr produkten nr slutet av sin livslngd ska du ta den till en tervinningsstation. Vid tiden fr kasseringen bidrar du till en bttre milj och mnsklig hlsa genom att gra dig av med den p ett tervinningsstlle. MPE 1mW/cm2 (NWA5123-AC) 0.316 mW/cm2 20 cm MPE 1mW/cm2 (NWA1123-ACv2) 0.316 mW/cm2 20 cm MPE 1mW/cm2 (NWA5121-N) 0.218 mW/cm2 20 cm MPE 1mW/cm2 (NWA5123-NI) 0.916 mW/cm2 22 cm MPE 1mW/cm2 (NWA5301-NJ) 0.122 mW/cm2 20 cm MPE 1mW/cm2 (WAC6503D-S) 0.744 mW/cm2 20 cm MPE 1mW/cm2 (WAC6502D-S) 0.320 mW/cm2 20 cm MPE 1mW/cm2 (WAC6502D-E) 0.403 mW/cm2 20 cm MPE 1mW/cm2 (WAC6553D-E) 0.539 mW/cm2 30 cm MPE 1mW/cm2 (WAC6103D-I) 0.448 mW/cm2 20 cm MPE 1mW/cm2 (WAC5302D-S) 0.109 mW/cm2 20 cm MPE 1mW/cm2 (NWA1123-AC PRO) 0.448 mW/cm2 20 cm MPE 1mW/cm2 (NWA1123-AC HD) 0.685 mW/cm2 20 cm MPE 1mW/cm2 (NWA5123-AC HD) 0.685 mW/cm2 20 cm MPE 1mW/cm2 (WAC6303D-S) 0.349 mW/cm2 20 cm 802.11a
(UNII) 5.25-5.35 5.25-5.35 (4.7.5)
(4.7.6)
(4.7.7) NWA / WAC Series Users Guide 251 Appendix D Legal Information
(WAC6553D-E)
:
-
-
( : / 110V AC 230V AC)
:
About the Symbols Various symbols are used in this product to ensure correct usage, to prevent danger to the user and others, and to prevent property damage. The meaning of these symbols are described below. It is important that you read these descriptions thoroughly and fully understand the contents. Explanation of the Symbols SYMBOL EXPLANATION Alternating current (AC):
AC is an electric current in which the flow of electric charge periodically reverses direction. Direct current (DC):
DC if the unidirectional flow or movement of electric charge carriers. Earth; ground:
A wiring terminal intended for connection of a Protective Earthing Conductor. Class II equipment:
The method of protection against electric shock in the case of class II equipment is either double insulation or reinforced insulation. Viewing Certifications Go to http://www.zyxel.com to view this products documentation and certifications. Zyxel Limited Warranty Zyxel warrants to the original end user (purchaser) that this product is free from any defects in material or workmanship for a specific period (the Warranty Period) from the date of purchase. The Warranty Period varies by region. Check with your vendor and/or the authorized Zyxel local distributor for details about the Warranty Period of this product. During the warranty period, and upon proof of purchase, should the product have indications of failure due to faulty workmanship and/or materials, Zyxel will, at its discretion, repair or replace the defective products or components without charge for either parts or labor, and to whatever extent it shall deem necessary to restore the product or components to proper operating condition. Any replacement will consist of a new or re-manufactured functionally equivalent product of equal or higher value, and will be solely at the discretion of Zyxel. This warranty shall not apply if the product has been modified, misused, tampered with, damaged by an act of God, or subjected to abnormal working conditions. NWA / WAC Series Users Guide 252 Appendix D Legal Information Note Repair or replacement, as provided under this warranty, is the exclusive remedy of the purchaser. This warranty is in lieu of all other warranties, express or implied, including any implied warranty of merchantability or fitness for a particular use or purpose. Zyxel shall in no event be held liable for indirect or consequential damages of any kind to the purchaser. To obtain the services of this warranty, contact your vendor. You may also refer to the warranty policy for the region in which you bought the device at http://www.zyxel.com/web/support_warranty_info.php. Registration Register your product online to receive e-mail notices of firmware upgrades and information at www.zyxel.com. Open Source Licenses This product contains in part some free software distributed under GPL license terms and/or GPL like licenses. Open source licenses are provided with the firmware package. You can download the latest firmware at www.zyxel.com. If you cannot find it there, contact your vendor or Zyxel Technical Support at support@zyxel.com.tw. To obtain the source code covered under those Licenses, please contact your vendor or Zyxel Technical Support at support@zyxel.com.tw. NWA / WAC Series Users Guide 253 Symbols A access 35 access privileges 18 access users 100 see also users 100 admin users 100 multiple logins 105 see also users 100 alerts 175, 179, 180, 182, 183, 184 antenna switch 200 AP 17 applications MBSSID 18 Repeater 20 B backing up configuration files 187 Basic Service Set see BSS BLE 97 Bluetooth 97 advertisements 97 advertising settings 99 Bluetooth Low Energy 97 Bluetooth Smart 97 iBeacon 97 iBeacon ID 97 major 97 minor 97 UUID 97 UUID format 99 Bluetooth Low Energy 97 Index Index Bluetooth Smart 97 boot module 192 BSS 18 C CA and certificates 133 CA (Certificate Authority), see certificates CAPWAP 75, 77 CEF (Common Event Format) 177, 182 Certificate Authority (CA) see certificates Certificate Management Protocol (CMP) 138 Certificate Revocation List (CRL) 133 vs OCSP 147 certificates 132 advantages of 133 and CA 133 and FTP 168 and HTTPS 154 and SSH 165 and WWW 155 certification path 133, 140, 145 expired 133 factory-default 133 file formats 133 fingerprints 141, 146 importing 136 not used for encryption 133 revoked 133 self-signed 133, 137 serial number 140, 145 storage space 135, 143 thumbprint algorithms 134 thumbprints 134 used for authentication 133 verifying fingerprints 134 certification requests 137, 138 certifications viewing 252 NWA / WAC Series Users Guide 254 channel 19 CLI 21, 40 button 40 messages 40 popup window 40 Reference Guide 2 cold start 34 commands 21 sent by Web Configurator 40 Common Event Format (CEF) 177, 182 comparison table 13, 14, 15, 16 configuration 17 information 196 configuration files 185 at restart 187 backing up 187 downloading 188 downloading with FTP 167 editing 185 how applied 186 lastgood.conf 187, 189 managing 186 startup-config.conf 189 startup-config-bad.conf 187 syntax 185 system-default.conf 189 uploading 190 uploading with FTP 167 use without restart 185 contact information 235 Control and Provisioning of Wireless Access Points See CAPWAP copyright 241 CPU usage 56, 58 current date/time 56, 149 daylight savings 151 setting manually 152 time server 153 customer support 235 D date 149 daylight savings 151 DCS 85 Index DHCP 149 and domain name 149 diagnostics 196 disclaimer 241 domain name 149 DTLS 75 dual radios 19 dual-radio application 19 dynamic channel selection 85 E e-mail daily statistics report 173 encryption 20 ESSID 207 Extended Service Set IDentification 107 F FCC interference statement 241 file extensions configuration files 185 shell scripts 185 file manager 185 firmware and restart 191 boot module, see boot module current version 55, 192 getting updated 191 uploading 191, 192 uploading with FTP 167 flash usage 56 FTP 21, 167 and certificates 168 with Transport Layer Security (TLS) 168 G Guide CLI Reference 2 NWA / WAC Series Users Guide 255 H HTTP over SSL, see HTTPS redirect to HTTPS 155 vs HTTPS 154 HTTPS 154 and certificates 154 authenticating clients 154 avoiding warning messages 157 example 155 vs HTTP 154 with Internet Explorer 156 with Netscape Navigator 156 HyperText Transfer Protocol over Secure Socket Layer, see HTTPS I IEEE 802.1x 108 installation 17 interface status 57 interfaces as DHCP servers 149 interference 19 Internet Protocol version 6, see IPv6 IP Address 75 gateway IP address 75 IP subnet 75 IPv6 227 addressing 227 EUI-64 229 global address 227 interface ID 229 link-local address 227 Neighbor Discovery Protocol 227 ping 227 prefix 227 prefix length 227 stateless autoconfiguration 229 unspecified address 228 Index K key pairs 132 L lastgood.conf 187, 189 layer-2 isolation 123 example 123 MAC 124 LED suppression 198 LEDs 25 Blinking 26, 28, 32 Flashing 26, 28, 29, 30, 32, 33 Off 26, 28, 29, 31, 32 load balancing 85 Locator LED 199 log messages categories 180, 182, 183, 184 debugging 72 regular 72 types of 72 logout Web Configurator 37 logs e-mail profiles 175 e-mailing log messages 74, 179 formats 177 log consolidation 180 settings 175 syslog servers 175 system 175 types of 175 M MAC address range 55 maintenance 17 management 17 Management Information Base (MIB) 169 Management Mode CAPWAP and DHCP 76 CAPWAP and IP Subnets 77 NWA / WAC Series Users Guide 256 managed AP 76 standalone mode 75 management mode 17 managing the device good habits 22 using FTP. See FTP. MBSSID 18 memory usage 56, 59 message bar 43 messages CLI 40 warning 43 mode 17 model name 55 My Certificates, see also certificates 135 N network access control 17 Network Time Protocol (NTP) 152 O objects certificates 132 users, account user 100 Online Certificate Status Protocol (OCSP) 147 vs CRL 147 operating mode 17 overview 13 P power off 34 power on 34 product registration 253 Public-Key Infrastructure (PKI) 133 public-private key pairs 132 Index R radio 19 reboot 34, 202 vs reset 202 Reference Guide, CLI 2 registration product 253 remote management FTP, see FTP Telnet 167 WWW, see WWW reports daily 173 daily e-mail 173 reset 212 vs reboot 202 vs shutdown 203 RESET button 34, 212 restart 202 RF interference 19 RFC 2510 (Certificate Management Protocol or CMP) 138 Rivest, Shamir and Adleman public-key algorithm
(RSA) 137 root AP 17 RSA 137, 145, 146 RSSI threshold 113 S SCEP (Simple Certificate Enrollment Protocol) 138 Secure Socket Layer, see SSL serial number 55 service control and users 153 limitations 153 timeouts 153 Service Set 107 Service Set Identifier see SSID shell scripts 185 downloading 194 editing 193 NWA / WAC Series Users Guide 257 how applied 186 managing 193 syntax 185 uploading 195 shutdown 34, 203 vs reset 203 Simple Certificate Enrollment Protocol (SCEP) 138 Simple Network Management Protocol, see SNMP SNMP 168, 169 agents 169 Get 169 GetNext 169 Manager 169 managers 169 MIB 169 network components 169 Set 169 Trap 169 traps 170 versions 168 SSH 163 and certificates 165 client requirements 165 encryption methods 164 for secure Telnet 165 how connection is established 163 versions 164 with Linux 166 with Microsoft Windows 165 SSID 18 SSID profile pre-configured 18 SSID profiles 18 SSL 154 starting the device 33 startup-config.conf 189 if errors 187 missing at restart 187 present at restart 187 startup-config-bad.conf 187 station 85 statistics daily e-mail report 173 status 54 status bar 43 warning message popup 43 stopping the device 33 Index supported browsers 35 syslog 177, 182 syslog servers, see also logs system log, see logs system name 55, 149 system uptime 56 system-default.conf 189 T Telnet 167 with SSH 165 time 149 time servers (default) 152 trademarks 241 Transport Layer Security (TLS) 168 troubleshooting 196 Trusted Certificates, see also certificates 142 U upgrading firmware 191 uploading configuration files 190 firmware 191 shell scripts 193 usage CPU 56, 58 flash 56 memory 56, 59 onboard flash 56 use 17 user authentication 100 user name rules 101 user objects 100 users 100 access, see also access users admin (type) 100 admin, see also admin users and service control 153 currently logged in 56 NWA / WAC Series Users Guide 258 Index SSID 107 wireless repeater 17 wireless security 18, 207 wireless station 85 Wizard Setup 47 WLAN interface 19 WPA2 108 WWW 154 and certificates 155 see also HTTP, HTTPS 154 default lease time 104, 106 default reauthentication time 104, 106 lease time 103 limited-admin (type) 100 lockout 105 reauthentication time 103 types of 100 user (type) 100 user names 101 V Vantage Report (VRPT) 177, 182 Virtual Local Area Network 80 VLAN 80 introduction 80 VRPT (Vantage Report) 177, 182 W warm start 34 warning message popup 43 warranty 252 note 253 WDS 17, 20 Web Configurator 21, 35 access 35 requirements 35 supported browsers 35 web configurator 17 WEP (Wired Equivalent Privacy) 108 wireless channel 207 wireless client 85 Wireless Distribution System (WDS) 20 wireless LAN 207 Wireless network overview 84 wireless network example 84 wireless profile 107 layer-2 isolation 107 MAC filtering 107 radio 107 security 107 NWA / WAC Series Users Guide 259
| frequency | equipment class | purpose | ||
|---|---|---|---|---|
| 1 | 2018-01-10 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX | Class II permissive change or modification of presently authorized equipment |
| 2 | 2017-11-20 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX | Original Equipment |
| 3 | 2412 ~ 2462 | DTS - Digital Transmission System |
| app s | Applicant Information | |||||
|---|---|---|---|---|---|---|
| 1 2 3 | Effective |
2018-01-10
|
||||
| 1 2 3 |
2017-11-20
|
|||||
| 1 2 3 | Applicant's complete, legal business name |
ZyXEL Communications Corporation
|
||||
| 1 2 3 | FCC Registration Number (FRN) |
0021059092
|
||||
| 1 2 3 | Physical Address |
No.2, Industry East Road IX, Science Park
|
||||
| 1 2 3 |
Hsinchu, N/A
|
|||||
| 1 2 3 |
Taiwan
|
|||||
| app s | TCB Information | |||||
| 1 2 3 | TCB Application Email Address |
c******@telefication.com
|
||||
| 1 2 3 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
| app s | FCC ID | |||||
| 1 2 3 | Grantee Code |
I88
|
||||
| 1 2 3 | Equipment Product Code |
WAC6303D-S
|
||||
| app s | Person at the applicant's address to receive grant or for contact | |||||
| 1 2 3 | Name |
E****** B********
|
||||
| 1 2 3 | Title |
Section Manager
|
||||
| 1 2 3 | Telephone Number |
886 3******** Extension:
|
||||
| 1 2 3 | Fax Number |
886 3********
|
||||
| 1 2 3 |
E******@zyxel.com.tw
|
|||||
| app s | Technical Contact | |||||
| 1 2 3 | Firm Name |
International Certification Corp.
|
||||
| 1 2 3 | Name |
G**** C****
|
||||
| 1 2 3 | Physical Address |
No.3-1, Lane 6, Wen San 3rd St. Kwei Shan Hsiang
|
||||
| 1 2 3 |
Taiwan
|
|||||
| 1 2 3 | Telephone Number |
886-3********
|
||||
| 1 2 3 | Fax Number |
886-3********
|
||||
| 1 2 3 |
G******@icertifi.com.tw
|
|||||
| app s | Non Technical Contact | |||||
| 1 2 3 | Firm Name |
International Certification Corp.
|
||||
| 1 2 3 | Name |
W****** L********
|
||||
| 1 2 3 | Physical Address |
No.3-1, Lane 6, Wen San 3rd St. Kwei Shan Hsiang
|
||||
| 1 2 3 |
Taiwan
|
|||||
| 1 2 3 | Telephone Number |
886-3********
|
||||
| 1 2 3 | Fax Number |
886-3********
|
||||
| 1 2 3 |
w******@icertifi.com.tw
|
|||||
| app s | Confidentiality (long or short term) | |||||
| 1 2 3 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 2 3 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 2 3 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 06/04/2018 | ||||
| 1 2 3 | 05/17/2018 | |||||
| if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
| app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
| 1 2 3 | Is this application for software defined/cognitive radio authorization? | No | ||||
| 1 2 3 | Equipment Class | NII - Unlicensed National Information Infrastructure TX | ||||
| 1 2 3 | DTS - Digital Transmission System | |||||
| 1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 802.11ac Wave 2 Dual-Radio Unified Pro Access Point / 802.11ac Wave 2 Dual-Radio Nebula Cloud Managed Access Point | ||||
| 1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes | ||||
| 1 2 3 | No | |||||
| 1 2 3 | Modular Equipment Type | Does not apply | ||||
| 1 2 3 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment | ||||
| 1 2 3 | Original Equipment | |||||
| 1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
| 1 2 3 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
| 1 2 3 | Grant Comments | Class II permissive change: enabling 5250MHz to 5350MHz, and 5470 to 5725MHz. The 80MHz operation is added to multiple channels at 5290MHz, 5530MHz, 5610MHz, and 5690MHz. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Operations in 5150-5250 MHz band is for indoor use only. This device has 20/40/80 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5210 and 5775 MHz. | ||||
| 1 2 3 | Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Operations in 5150-5250 MHz band is for indoor use only. This device has 20/40/80 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5210 and 5775 MHz. | |||||
| 1 2 3 | Output power listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes. | |||||
| 1 2 3 | Is there an equipment authorization waiver associated with this application? | No | ||||
| 1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
| app s | Test Firm Name and Contact Information | |||||
| 1 2 3 | Firm Name |
International Certification Corp.
|
||||
| 1 2 3 | Name |
F**** C********
|
||||
| 1 2 3 | Telephone Number |
886-3******** Extension:
|
||||
| 1 2 3 | Fax Number |
886-3********
|
||||
| 1 2 3 |
J******@icertifi.com.tw
|
|||||
| Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 1 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.485 | |||||||||||||||||||||||||||||||||||
| 1 | 2 | 15E | 38 CC MO ND | 5260 | 5320 | 0.176 | |||||||||||||||||||||||||||||||||||
| 1 | 3 | 15E | 38 CC MO ND | 5500 | 5720 | 0.214 | |||||||||||||||||||||||||||||||||||
| 1 | 4 | 15E | 38 CC MO | 5745 | 5825 | 0.65 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 2 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.485 | |||||||||||||||||||||||||||||||||||
| 2 | 2 | 15E | 38 CC MO | 5745 | 5825 | 0.65 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 3 | 1 | 15C | CC MO | 2412 | 2462 | 0.974 | |||||||||||||||||||||||||||||||||||
| 3 | 2 | 15C | CC MO | 2402 | 2480 | 0.002 | |||||||||||||||||||||||||||||||||||
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC