all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
user manual | Users Manual | 2.38 MiB | June 02 2007 / August 02 2007 | |||
1 | Cover Letter(s) | June 02 2007 / August 02 2007 | ||||||
1 | Cover Letter(s) | June 02 2007 / August 02 2007 | ||||||
1 | External Photos | June 02 2007 / August 02 2007 | ||||||
1 | Internal Photos | June 02 2007 / August 02 2007 | ||||||
1 | ID Label/Location Info | June 02 2007 / August 02 2007 | ||||||
1 | RF Exposure Info | June 02 2007 / August 02 2007 | ||||||
1 | Test Setup Photos | June 02 2007 / August 02 2007 | ||||||
1 | Test Report | June 02 2007 / August 02 2007 |
1 | user manual | Users Manual | 2.38 MiB | June 02 2007 / August 02 2007 |
ZyXEL G-210H 802.11b/g Wireless USB Adapter Users Guide Version 1.0 Edition 1 1/2007 ZyXEL G-210H Users Guide Copyright Copyright 2007 by ZyXEL Communications Corporation. The contents of this publication may not be reproduced in any part or as a whole, transcribed, stored in a retrieval system, translated into any language, or transmitted in any form or by any means, electronic, mechanical, magnetic, optical, chemical, photocopying, manual, or otherwise, without the prior written permission of ZyXEL Communications Corporation. Published by ZyXEL Communications Corporation. All rights reserved. Disclaimer ZyXEL does not assume any liability arising out of the application or use of any products, or software described herein. Neither does it convey any license under its patent rights nor the patent rights of others. ZyXEL further reserves the right to make changes in any products described herein without notice. This publication is subject to change without notice. Trademarks ZyNOS (ZyXEL Network Operating System) is a registered trademark of ZyXEL Communications, Inc. Other trademarks mentioned in this publication are used for identification purposes only and may be properties of their respective owners. Certifications Federal Communications Commission (FCC) Interference Statement The device complies with Part 15 of FCC rules. Operation is subject to the following two conditions:
This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operations. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Copyright 3 ZyXEL G-210H Users Guide If this equipment does cause harmful interference to radio/television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1 Reorient or relocate the receiving antenna. 2 Increase the separation between the equipment and the receiver. 3 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4 Consult the dealer or an experienced radio/TV technician for help. Notice 1 Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This product has been designed for the WLAN 2.4 GHz network throughout the EC region and Switzerland, with restrictions in France. Caution 1 The 802.11g Wireless LAN Adapter has been tested to the FCC exposure requirements
(Specific Absorption Rate). 2 The equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment, under 47 CFR 2.1093 paragraph (d)(2). 3 This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Viewing Certifications 1 Go to http://www.zyxel.com. 2 Select your product from the drop-down list box on the ZyXEL home page to go to that product's page. 3 Select the certification you wish to view from this page.
4 Certifications ZyXEL G-210H Users Guide ZyXEL Limited Warranty ZyXEL warrants to the original end user (purchaser) that this product is free from any defects in materials or workmanship for a period of up to two (2) years from the date of purchase. During the warranty period, and upon proof of purchase, should the product have indications of failure due to faulty workmanship and/or materials, ZyXEL will, at its discretion, repair or replace the defective products or components without charge for either parts or labor, and to whatever extent it shall deem necessary to restore the product or components to proper operating condition. Any replacement will consist of a new or re-manufactured functionally equivalent product of equal or higher value, and will be solely at the discretion of ZyXEL. This warranty shall not apply if the product has been modified, misused, tampered with, damaged by an act of God, or subjected to abnormal working conditions. Note Repair or replacement, as provided under this warranty, is the exclusive remedy of the purchaser. This warranty is in lieu of all other warranties, express or implied, including any implied warranty of merchantability or fitness for a particular use or purpose. ZyXEL shall in no event be held liable for indirect or consequential damages of any kind to the purchaser. To obtain the services of this warranty, contact ZyXEL's Service Center for your Return Material Authorization number (RMA). Products must be returned Postage Prepaid. It is recommended that the unit be insured when shipped. Any returned products without proof of purchase or those with an out-dated warranty will be repaired or replaced (at the discretion of ZyXEL) and the customer will be billed for parts and labor. All repaired or replaced products will be shipped by ZyXEL to the corresponding return address, Postage Paid. This warranty gives you specific legal rights, and you may also have other rights that vary from country to country. Online Registration Register your product online to receive e-mail notices of firmware upgrades and information at www.zyxel.com. ZyXEL Limited Warranty 5 ZyXEL G-210H Users Guide Customer Support Please have the following information ready when you contact customer support. Product model and serial number. Warranty Information. Date that you received your device. Brief description of the problem and the steps you took to solve it. METHOD SUPPORT E-MAIL TELEPHONEA LOCATION SALES E-MAIL FAX CORPORATE HEADQUARTERS
(WORLDWIDE) support@zyxel.com.tw +886-3-578-3942 sales@zyxel.com.tw
+886-3-578-2439 CZECH REPUBLIC info@cz.zyxel.com info@cz.zyxel.com
+420-241-091-350
+420-241-091-359 WEB SITE FTP SITE www.zyxel.com www.europe.zyxel.com ftp.zyxel.com ftp.europe.zyxel.com www.zyxel.cz DENMARK FINLAND FRANCE GERMANY HUNGARY support@zyxel.dk sales@zyxel.dk
+45-39-55-07-00
+45-39-55-07-07 support@zyxel.fi sales@zyxel.fi
+358-9-4780-8411
+358-9-4780 8448 info@zyxel.fr
+33-4-72-52-97-97
+33-4-72-52-19-20 support@zyxel.de sales@zyxel.de
+49-2405-6909-0
+49-2405-6909-99 support@zyxel.hu info@zyxel.hu
+36-1-3361649
+36-1-3259100 KAZAKHSTAN http://zyxel.kz/support sales@zyxel.kz
+7-3272-590-698
+7-3272-590-689 www.zyxel.dk www.zyxel.fi www.zyxel.fr www.zyxel.de www.zyxel.hu www.zyxel.kz NORTH AMERICA support@zyxel.com sales@zyxel.com 1-800-255-4101
+1-714-632-0882
+1-714-632-0858 NORWAY support@zyxel.no sales@zyxel.no
+47-22-80-61-80
+47-22-80-61-81 www.us.zyxel.com ftp.us.zyxel.com www.zyxel.no REGULAR MAIL ZyXEL Communications Corp. 6 Innovation Road II Science Park Hsinchu 300 Taiwan ZyXEL Communications Czech s.r.o. Modransk 621 143 01 Praha 4 - Modrany Cesk Republika ZyXEL Communications A/S Columbusvej 2860 Soeborg Denmark ZyXEL Communications Oy Malminkaari 10 00700 Helsinki Finland ZyXEL France 1 rue des Vergers Bat. 1 / C 69760 Limonest France ZyXEL Deutschland GmbH. Adenauerstr. 20/A2 D-52146 Wuerselen Germany ZyXEL Hungary 48, Zoldlomb Str. H-1025, Budapest Hungary ZyXEL Kazakhstan 43, Dostyk ave.,Office 414 Dostyk Business Centre 050010, Almaty Republic of Kazakhstan ZyXEL Communications Inc. 1130 N. Miller St. Anaheim CA 92806-2001 U.S.A. ZyXEL Communications A/S Nils Hansens vei 13 0667 Oslo Norway 6 Customer Support METHOD SUPPORT E-MAIL TELEPHONEA LOCATION SALES E-MAIL FAX info@pl.zyxel.com
+48 (22) 333 8250
+48 (22) 333 8251 WEB SITE FTP SITE www.pl.zyxel.com POLAND RUSSIA SPAIN SWEDEN UKRAINE http://zyxel.ru/support sales@zyxel.ru
+7-095-542-89-29
+7-095-542-89-25 www.zyxel.ru support@zyxel.es sales@zyxel.es
+34-902-195-420
+34-913-005-345 support@zyxel.se sales@zyxel.se
+46-31-744-7700
+46-31-744-7701 support@ua.zyxel.com +380-44-247-69-78 sales@ua.zyxel.com
+380-44-494-49-32 www.zyxel.es www.zyxel.se www.ua.zyxel.com UNITED KINGDOM support@zyxel.co.uk sales@zyxel.co.uk
+44-1344 303044 08707 555779 (UK only)
+44-1344 303034 www.zyxel.co.uk ftp.zyxel.co.uk a. + is the (prefix) number you enter to make an international telephone call. ZyXEL G-210H Users Guide REGULAR MAIL ZyXEL Communications ul. Okrzei 1A 03-715 Warszawa Poland ZyXEL Russia Ostrovityanova 37a Str. Moscow, 117279 Russia ZyXEL Communications Arte, 21 5 planta 28033 Madrid Spain ZyXEL Communications A/S Sjporten 4, 41764 Gteborg Sweden ZyXEL Ukraine 13, Pimonenko Str. Kiev, 04050 Ukraine ZyXEL Communications UK Ltd.,11 The Courtyard, Eastern Road, Bracknell, Berkshire, RG12 2XB, United Kingdom (UK) Customer Support 7 ZyXEL G-210H Users Guide 8 Customer Support ZyXEL G-210H Users Guide Table of Contents Copyright .................................................................................................................. 3 Certifications ............................................................................................................ 3 ZyXEL Limited Warranty.......................................................................................... 5 Customer Support.................................................................................................... 6 Table of Contents ..................................................................................................... 9 List of Figures ........................................................................................................ 13 List of Tables .......................................................................................................... 15 Preface .................................................................................................................... 17 Chapter 1 Getting Started ....................................................................................................... 19 1.1 About Your G-210H ..........................................................................................19 1.2 Application Overview ..........................................................................................19 1.2.1 Station Mode .............................................................................................19 1.2.1.1 Infrastructure ...................................................................................19 1.2.1.2 Ad-Hoc ............................................................................................20 1.3 G-210H Hardware and Utility Installation ...........................................................21 1.3.1 ZyXEL Utility Icon .....................................................................................21 1.4 Configuration Methods ......................................................................................21 1.4.1 Enabling WZC ...........................................................................................21 1.4.2 Accessing the ZyXEL Utility .....................................................................22 Chapter 2 Tutorial .................................................................................................................... 23 2.1 Connecting to a Wireless LAN ..........................................................................23 2.2 Creating and Using a Profile ..............................................................................25 Chapter 3
................................................................................................................................. 29 Wireless LAN Network........................................................................................... 29 3.1 Wireless LAN Overview ....................................................................................29 3.2 Wireless LAN Security ......................................................................................30 3.2.1 Hide SSID .................................................................................................30 Table of Contents 9 ZyXEL G-210H Users Guide 3.2.2 MAC Address Filter ...................................................................................30 3.2.3 User Authentication and Encryption .........................................................30 3.2.3.1 WEP ................................................................................................31 3.2.3.2 IEEE 802.1x ....................................................................................31 3.2.3.3 WPA and WPA2 ..............................................................................32 Chapter 4 Wireless Station Mode Configuration .................................................................. 33 4.1 Wireless Station Mode Overview ......................................................................33 4.1.1 ZyXEL Utility Screen Summary ...............................................................33 4.2 The Link Info Screen ..........................................................................................34 4.3 The Site Survey Screen .....................................................................................35 4.3.1 Security Settings .......................................................................................36 4.3.1.1 WEP Encryption ..............................................................................36 4.3.1.2 WPA-PSK/WPA2-PSK .....................................................................37 4.3.1.3 WPA/WPA2 .....................................................................................38 4.3.1.4 IEEE 802.1x ....................................................................................39 4.4 The Profile Screen .............................................................................................41 4.4.1 Adding a New Profile ................................................................................43 4.5 The Adapter Screen ...........................................................................................45 Chapter 5
................................................................................................................................. 47 Maintenance ........................................................................................................... 47 5.1 The About Screen .............................................................................................47 5.2 Uninstalling the ZyXEL Utility ............................................................................47 5.3 Upgrading the ZyXEL Utility ..............................................................................48 Chapter 6 Troubleshooting .................................................................................................. 49 6.1 Problems Starting the ZyXEL Utility ...................................................................49 6.2 Problem with the Link Quality .............................................................................49 6.3 Problems Communicating With Other Computers .............................................50 Appendix A Product Specifications .......................................................................................... 51 Appendix B Management with Wireless Zero Configuration.................................................. 53 Appendix C Wireless Security ................................................................................................... 65 Appendix D 10 Table of Contents ZyXEL G-210H Users Guide Setting up Your Computers IP Address.............................................................. 71 Index........................................................................................................................ 77 Table of Contents 11 ZyXEL G-210H Users Guide 12 Table of Contents ZyXEL G-210H Users Guide List of Figures Figure 1 Application: Infrastructure ....................................................................... 20 Figure 2 Application: Ad-Hoc ................................................................................ 20 Figure 3 ZyXEL Utility: System Tray Icon .............................................................. 21 Figure 4 Enable WZC ............................................................................................. 22 Figure 5 Infrastructure Network .............................................................................. 23 Figure 6 ZyXEL Utility: Site Survey ........................................................................ 24 Figure 7 ZyXEL Utility: Security Settings .............................................................. 24 Figure 8 ZyXEL Utility: Confirm Save ..................................................................... 25 Figure 9 ZyXEL Utility: Link Info ............................................................................ 25 Figure 10 ZyXEL Utility: Profile .............................................................................. 26 Figure 11 ZyXEL Utility: Add New Profile ............................................................... 26 Figure 12 ZyXEL Utility: Profile Security ................................................................ 27 Figure 13 ZyXEL Utility: Profile Activate ................................................................ 27 Figure 14 Example of a Wireless Network ............................................................. 29 Figure 15 ZyXEL Utility Menu Summary: Station Mode ........................................ 33 Figure 16 Station Mode: Link Info ......................................................................... 34 Figure 17 Station Mode: Site Survey ..................................................................... 35 Figure 18 Station Mode: Security Setting: WEP ................................................... 36 Figure 19 Station Mode: Security Setting: WPA-PSK/WPA2-PSK ......................... 37 Figure 20 Station Mode: Security Settings: WPA/WPA2 ........................................ 38 Figure 21 Station Mode: Security Setting: 802.1x ................................................. 40 Figure 22 Station Mode: Profile ............................................................................ 42 Figure 23 Station Mode: Profile: Add a New Profile .............................................. 43 Figure 24 Station Mode: Profile: Wireless Settings ............................................... 44 Figure 25 Station Mode: Profile: Security Settings ................................................ 45 Figure 26 Station Mode: Profile: Activate the Profile ............................................. 45 Figure 27 Station Mode: Adapter .......................................................................... 46 Figure 28 About ..................................................................................................... 47 Figure 29 Uninstall: Finish ..................................................................................... 48 Figure 30 Windows XP SP2: WZC Not Available .................................................. 53 Figure 31 Windows XP SP2: System Tray Icon ..................................................... 54 Figure 32 Windows XP SP2: Wireless Network Connection Status ....................... 54 Figure 33 Windows XP SP1: Wireless Network Connection Status ....................... 55 Figure 34 Windows XP SP2: Wireless Network Connection .................................. 55 Figure 35 Windows XP SP1: Wireless Network Connection Properties ................ 56 Figure 36 Windows XP SP2: Wireless Network Connection: WEP or WPA-PSK .. 57 Figure 37 Windows XP SP2: Wireless Network Connection: No Security ............ 57 Figure 38 Windows XP: Wireless (network) properties: Association ..................... 58 List of Figures 13 ZyXEL G-210H Users Guide Figure 39 Windows XP: Wireless (network) properties: Authentication ................. 59 Figure 40 Windows XP: Protected EAP Properties ................................................ 60 Figure 41 Windows XP: Smart Card or other Certificate Properties ...................... 61 Figure 42 Windows XP SP2: Wireless Networks: Preferred Networks .................. 62 Figure 43 Windows XP SP1: Wireless Networks: Preferred Networks .................. 63 Figure 44 WPA-PSK Authentication ....................................................................... 69 Figure 45 WPA(2) with RADIUS Application Example ........................................... 70 Figure 46 Windows XP: Start Menu ....................................................................... 71 Figure 47 Windows XP: Control Panel ................................................................... 72 Figure 48 Windows XP: Control Panel: Network Connections: Properties ............ 72 Figure 49 Windows XP: Local Area Connection Properties ................................... 73 Figure 50 Windows XP: Advanced TCP/IP Settings .............................................. 74 Figure 51 Windows XP: Internet Protocol (TCP/IP) Properties .............................. 75 14 List of Figures ZyXEL G-210H Users Guide List of Tables Table 1 ZyXEL Utility: System Tray Icon ............................................................... 21 Table 2 ZyXEL Utility Menu Summary: Station Mode ............................................ 33 Table 3 Station Mode: Link Info ............................................................................. 34 Table 4 Station Mode: Site Survey ........................................................................ 35 Table 5 Station Mode: Security Setting: WEP ....................................................... 36 Table 6 Station Mode: Security Setting: WPA-PSK/WPA2-PSK ............................ 38 Table 7 Station Mode: Security Setting: WPA/WPA2 ............................................. 39 Table 8 Station Mode: Security Settings: IEEE 802.1x .......................................... 40 Table 9 Station Mode: Profile ................................................................................ 42 Table 10 Station Mode: Profile: Add a New Profile ................................................ 43 Table 11 Station Mode: Adapter ............................................................................ 46 Table 12 About ...................................................................................................... 47 Table 13 Troubleshooting Starting ZyXEL Utility ................................................... 49 Table 14 Troubleshooting Link Quality .................................................................. 49 Table 15 Troubleshooting Communication Problem .............................................. 50 Table 16 Product Specifications ............................................................................ 51 Table 17 Windows XP SP2: System Tray Icon ...................................................... 54 Table 18 Windows XP SP2: Wireless Network Connection .................................. 56 Table 19 Windows XP: Wireless Networks ........................................................... 57 Table 20 Windows XP: Wireless (network) properties: Association ...................... 58 Table 21 Windows XP: Wireless (network) properties: Authentication .................. 59 Table 22 Windows XP: Protected EAP Properties ................................................ 60 Table 23 Windows XP: Smart Card or other Certificate Properties ....................... 61 Table 24 Comparison of EAP Authentication Types .............................................. 67 Table 25 Wireless Security Relational Matrix ........................................................ 70 List of Tables 15 ZyXEL G-210H Users Guide 16 List of Tables ZyXEL G-210H Users Guide Preface Congratulations on your purchase of the ZyXEL G-210H 802.11b/g Wireless USB Adapter Your G-210H allows you to connect and access wireless networks. Your G-210H also allows you to visually see the connection strength of the Access Point with its physical LED's. Your G-210H is easy to install and configure. About This User's Guide This manual is designed to guide you through the configuration of your G-210H for its various applications. Related Documentation Supporting Disk Refer to the included CD for support documents. Quick Start Guide The Quick Start Guide is designed to help you get up and running right away. It contains hardware installation/connection information. ZyXEL Glossary and Web Site Please refer to www.zyxel.com for an online glossary of networking terms and additional support documentation. User Guide Feedback Help us help you. E-mail all User Guide-related comments, questions or suggestions for improvement to techwriters@zyxel.com.tw or send regular mail to The Technical Writing Team, ZyXEL Communications Corp., 6 Innovation Road II, Science-Based Industrial Park, Hsinchu, 300, Taiwan. Thank you. Syntax Conventions Enter means for you to type one or more characters. Select or Choose means for you to use one predefined choice. Mouse action sequences are denoted using a comma. For example, In Windows, click Start, Settings and then Control Panel means first click the Start button, then point your mouse pointer to Settings and then click Control Panel. e.g., is a shorthand for for instance, and i.e., means that is or in other words. The ZyXEL G-210H 802.11b/g Wireless USB Adapter may be referred to as the G-210H in this users guide. Preface 17 ZyXEL G-210H Users Guide Graphics Icons Key Wireless Access Point Computer Notebook Computer Server Modem or Router Wireless Signal Internet Cloud 18 Preface ZyXEL G-210H Users Guide CHAPTER 1 Getting Started This chapter introduces the G-210H and prepares you to use the ZyXEL utility. 1.1 About Your G-210H The G-210H is an IEEE 802.11b/g compliant wireless LAN adapter that connects to the USB port on your computer and allows you to search for and connect to wireless networks. The ZyXEL utility is a tool that helps you configure your G-210H. When connectced to the USB port, you can search for the best direction to point the G-210H by simply looking at the number of LEDs that illuminate. For more information about using the G-210H when it is not connected to a computer, please see the Quick Start Guide. 1.2 Application Overview This section describes some network applications for the G-210H. 1.2.1 Station Mode The G-210H is in wireless station mode by default. When the G-210H works as a wireless station (wireless client), you can either set the network type to Infrastructure and connect to an AP or use Ad-Hoc mode and connect to a peer computer (another wireless device in Ad-
Hoc mode). 1.2.1.1 Infrastructure To connect to a network via an access point (AP), set the G-210H network type to Infrastructure. Through the AP, you can access the Internet or the wired network behind the AP. Chapter 1 Getting Started 19 ZyXEL G-210H Users Guide Figure 1 Application: Infrastructure 1.2.1.2 Ad-Hoc To set up a small independent wireless workgroup without an AP, use Ad-Hoc. Ad-Hoc does not require an AP or a wired network. Two or more wireless clients communicate directly with each other. Figure 2 Application: Ad-Hoc 20 Chapter 1 Getting Started ZyXEL G-210H Users Guide 1.3 G-210H Hardware and Utility Installation Follow the instructions in the Quick Start Guide to install the ZyXEL utility and make hardware connections. 1.3.1 ZyXEL Utility Icon After you install and start the ZyXEL utility, an icon for the ZyXEL utility appears in the system tray. Note: The ZyXEL utility system tray icon displays only when the G-210H is installed properly. Figure 3 ZyXEL Utility: System Tray Icon The color of the ZyXEL utility system tray icon indicates the status of the G-210H. Refer to the following table for details. Table 1 ZyXEL Utility: System Tray Icon COLOR Red Green Pale Blue DESCRIPTION The G-210H is operating in wireless station mode but is not connected to a wireless network. The G-210H is operating in wireless station mode and is connected to a wireless network. The G-210H is operating in access point mode. 1.4 Configuration Methods To configure your G-210H, use one of the following applications:
Wireless Zero Configuration (WZC) (the Windows XP wireless configuration tool) ZyXEL Utility (required when you want to use the G-210H as an access point) 1.4.1 Enabling WZC Note: When you use the ZyXEL utility, it automatically disables WZC. If you want to use WZC to configure the G-210H, you need to disable the ZyXEL utility by right-clicking the utility icon (
) in the system tray and selecting Exit. Chapter 1 Getting Started 21 ZyXEL G-210H Users Guide Figure 4 Enable WZC Refer to the appendices for information on how to use WZC to manage the G-210H. To re-activate the ZyXEL utility, double-click the (
(All) Programs, ZyXEL G-210H Wireless Adapter Utility, ZyXEL G-210H Wireless Adapter Software.
) icon on your desktop or click Start, 1.4.2 Accessing the ZyXEL Utility Double-click on the ZyXEL wireless LAN utility icon in the system tray to open the ZyXEL utility. The ZyXEL utility screens are similar in all Microsoft Windows versions. Screens for Windows XP are shown in this Users Guide. Note: Click the window. icon (located in the top right corner) to display the online help 22 Chapter 1 Getting Started ZyXEL G-210H Users Guide CHAPTER 2 Tutorial The following sections show you how to join a wireless network using the ZyXEL utility, as in the following diagrams. The wireless client is labeled C and the access point is labeled AP. Figure 5 Infrastructure Network There are three ways to connect the wireless client (the G-210H in station mode) to a network. Configure nothing and leave the wireless client to automatically scan for and connect to any available network that has no wireless security configured. Manually connect to a network (see Section 2.1 on page 23). Configure a profile to have the wireless client automatically connect to a specific network or peer computer (see Section 2.2 on page 25). This chapter also includes a simple example of how to configure the G-210H as an AP using the ZyXEL utility. See Section 2.3 on page 31 for more information. 2.1 Connecting to a Wireless LAN This example illustrates how to manually connect your wireless client to an access point (AP) configured for WPA-PSK security and connected to the Internet. Before you connect to the access point, you must know its Service Set IDentity (SSID) and WPA-PSK pre-shared key. In this example, the APs SSID is SSID_Example3 and its pre-shared key is ThisismyWPA-
PSKpre-sharedkey. After you install the ZyXEL utility and then insert the wireless client, follow the steps below to connect to a network using the Site Survey screen. 1 Open the ZyXEL utility and click the Site Survey tab to open the screen shown next. Chapter 2 Tutorial 23 ZyXEL G-210H Users Guide Figure 6 ZyXEL Utility: Site Survey 2 The wireless client automatically searches for available wireless networks. Click Scan if you want to search again. If no entry displays in the Available Network List, that means there is no wireless network available within range. Make sure the AP or peer computer is turned on, or move the wireless client closer to the AP or peer computer. See Table 4 on page 35 for detailed field descriptions. 3 To connect to an AP or peer computer, either click an entry in the list and then click Connect or double-click an entry (ZyXELUSA-X5 in this example). 4 When you try to connect to an AP with security configured, a window will pop up prompting you to specify the security settings. Enter the pre-shared key and leave the encryption type at the default setting. Use the Next button to move on to the next screen. You can use the Back button at any time to return to the previous screen, or the Exit button to return to the Site Survey screen. Figure 7 ZyXEL Utility: Security Settings 5 The Confirm Save window appears. Check your settings and click Save to continue. 24 Chapter 2 Tutorial Figure 8 ZyXEL Utility: Confirm Save ZyXEL G-210H Users Guide 6 The ZyXEL utility returns to the Link Info screen while it connects to the wireless network using your settings. When the wireless link is established, the ZyXEL utility icon in the system tray turns green and the Link Info screen displays details of the active connection. Check the network information in the Link Info screen to verify that you have successfully connected to the selected network. If the wireless client is not connected to a network, the fields in this screen remain blank. See Table 3 on page 34 for detailed field descriptions. Figure 9 ZyXEL Utility: Link Info 7 Open your Internet browser and enter http://www.zyxel.com or the URL of any other web site in the address bar. If you are able to access the web site, your wireless connection is successfully configured. If you cannot access the web site, check the Troubleshooting section of this User's Guide or contact your network administrator if necessary. 2.2 Creating and Using a Profile A profile lets you automatically connect to the same wireless network every time you use the ZyXEL utility. You can also configure different profiles for different networks, for example if you connect a notebook computer to wireless networks at home and at work. Chapter 2 Tutorial 25 ZyXEL G-210H Users Guide This example illustrates how to set up a profile and connect the wireless client to an access point configured for WPA-PSK security. In this example, the APs SSID is SSID_Example3 and its pre-shared key is ThisismyWPA-PSKpre-sharedkey. You have chosen the profile name PN_Example3. 1 Open the ZyXEL utility and click the Profile tab to open the screen as shown. Click Add to configure a new profile. Figure 10 ZyXEL Utility: Profile 2 The Add New Profile screen appears. The wireless client automatically searches for available wireless networks, which are displayed in the Scan Info box. You can also configure your profile for a wireless network that is not in the list. Figure 11 ZyXEL Utility: Add New Profile 3 Give the profile a descriptive name (of up to 32 printable ASCII characters). Select Infrastructure and either manually enter or select the AP's SSID in the drop down menu. Finally, choose whether or not you wish to have the G-210H be on the maximum power output level *default* or Power Save mode then click Select. 4 Choose the same encryption method as the AP to which you want to connect (In this example, WPA-PSK and TKIP). Then type in the appropriate Pre-Shared Key which in this case is ThisismyWPA-PSKpre-sharedkey. 26 Chapter 2 Tutorial Figure 12 ZyXEL Utility: Profile Security ZyXEL G-210H Users Guide 5 Click Activate Now to use the new profile immediately. Otherwise, click the Activate Later button to go back to the Profile List screen. If you clicked Activate Later you can select the profile from the list in the Profile screen and click Connect to activate it. Note: Only one profile can be activated and used at any given time. Figure 13 ZyXEL Utility: Profile Activate 6 When you activate the new profile, the ZyXEL utility goes to the Link Info screen while it connects to the AP using your settings. When the wireless link is established, the ZyXEL utility icon in the system tray turns green and the Link Info screen displays details of the active connection. 7 Make sure the selected AP in the active profile is on and connected to the Internet. Open your Internet browser, enter http://www.zyxel.com or the URL of any other web site in the address bar and press ENTER. If you are able to access the web site, your new profile is successfully configured. 8 If you cannot access the Internet, go back to the Profile screen. Select the profile you are using and click Edit. Check the details you entered previously. Also, refer to the Troubleshooting section of this User's Guide or contact your network administrator if necessary. Chapter 2 Tutorial 27 ZyXEL G-210H Users Guide 28 Chapter 2 Tutorial ZyXEL G-210H Users Guide CHAPTER 3 Wireless LAN Network This chapter provides background information on wireless LAN networks. 3.1 Wireless LAN Overview The following figure provides an example of a wireless network with an AP. See Figure 2 on page 20 for an Ad Hoc network example. Figure 14 Example of a Wireless Network The wireless network is the part in the blue circle. In this wireless network, devices A and B are called wireless clients. The wireless clients use the access point (AP) to interact with other devices (such as the printer) or with the Internet Every wireless network must follow these basic guidelines. Every device in the same wireless network must use the same SSID. The SSID is the name of the wireless network. It stands for Service Set IDentity. If two wireless networks overlap, they should use a different channel. Chapter 3 29 ZyXEL G-210H Users Guide Like radio stations or television channels, each wireless network uses a specific channel, or frequency, to send and receive information. Every device in the same wireless network must use security compatible with the AP or peer computer. Security stops unauthorized devices from using the wireless network. It can also protect the information that is sent in the wireless network. 3.2 Wireless LAN Security Wireless LAN security is vital to your network to protect wireless communications. Configure the wireless LAN security using the Configuration or the Profile Security Setting screen. If you do not enable any wireless security on your G-210H, the G-210Hs wireless communications are accessible to any wireless networking device that is in the coverage area. Note: You can only use WEP encryption if you set the G-210H to Ad-hoc. See the appendices for more detailed information about wireless security. 3.2.1 Hide SSID This type of security is fairly weak, because there are ways for unauthorized wireless devices to get the SSID. In addition, unauthorized wireless devices can still see the information that is sent in the wireless network. 3.2.2 MAC Address Filter Every device that can use a wireless network has a unique identification number, called a MAC address.1 A MAC address is usually written using twelve hexadecimal characters2; for example, 00A0C5000002 or 00:A0:C5:00:00:02. To get the MAC address for each device in the wireless network, see the devices Users Guide or other documentation. This type of security does not protect the information that is sent in the wireless network. Furthermore, there are ways for unauthorized wireless devices to get the MAC address of an authorized device. Then, they can use that MAC address to access the wireless network. 3.2.3 User Authentication and Encryption You can make every user log in to the wireless network before they can use it. This is called user authentication. However, every wireless client in the wireless network has to support IEEE 802.1x to do this. 1. Some wireless devices, such as scanners, can detect wireless networks but cannot use wireless networks. These kinds of wireless devices might not have MAC addresses. 2. Hexadecimal characters are 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, and F. 30 Chapter 3 Wireless LAN Network ZyXEL G-210H Users Guide Wireless networks can use encryption to protect the information that is sent in the wireless network. Encryption is like a secret code. If you do not know the secret code, you cannot understand the message. 3.2.3.1 WEP 3.2.3.1.1 Data Encryption WEP (Wired Equivalent Privacy) encryption scrambles all data packets transmitted between the G-210H and the AP or other wireless stations to keep network communications private. Both the wireless stations and the access points must use the same WEP key for data encryption and decryption. There are two ways to create WEP keys in your G-210H. Automatic WEP key generation based on a password phrase called a passphrase. The passphrase is case sensitive. You must use the same passphrase for all WLAN adapters with this feature in the same WLAN. For WLAN adapters without the passphrase feature, you can still take advantage of this feature by writing down the four automatically generated WEP keys from the Security Settings screen of the ZyXEL utility and entering them manually as the WEP keys in the other WLAN adapter(s). Enter the WEP keys manually. Your G-210H allows you to configure up to four 64-bit, 128-bit WEP keys and only one key is used as the default key at any one time. 3.2.3.1.2 Authentication Type The IEEE 802.11b/g standard describes a simple authentication method between the wireless stations and AP. Two authentication types are defined: Open and Shared. Open mode is implemented for ease-of-use and when security is not an issue. The wireless station and the AP or peer computer do not share a secret key. Thus the wireless stations can associate with any AP or peer computer and listen to any transmitted data that is not encrypted. Shared mode involves a shared secret key to authenticate the wireless station to the AP or peer computer. This requires you to enable the wireless LAN security and use same settings on both the wireless station and the AP or peer computer. 3.2.3.2 IEEE 802.1x The IEEE 802.1x standard outlines enhanced security methods for both the authentication of wireless stations and encryption key management. Authentication can be done using an external RADIUS server. Chapter 3 Wireless LAN Network 31 ZyXEL G-210H Users Guide 3.2.3.2.1 EAP Authentication EAP (Extensible Authentication Protocol) is an authentication protocol that runs on top of the IEEE 802.1x transport mechanism in order to support multiple types of user authentication. By using EAP to interact with an EAP-compatible RADIUS server, an access point helps a wireless station and a RADIUS server perform authentication. The type of authentication you use depends on the RADIUS server and an intermediary AP(s) that supports IEEE 802.1x. The G-210H supports EAP-TLS, EAP-TTLS and EAP-PEAP. Refer to Appendix C on page 65 for descriptions. For EAP-TLS authentication type, you must first have a wired connection to the network and obtain the certificate(s) from a certificate authority (CA). A certificate (also called digital IDs) can be used to authenticate users and a CA issues certificates and guarantees the identity of each certificate owner. 3.2.3.3 WPA and WPA2 Wi-Fi Protected Access (WPA) is a subset of the IEEE 802.11i standard. WPA2 (IEEE 802.11i) is a wireless security standard that defines stronger encryption, authentication and key management than WPA. Key differences between WPA(2) and WEP are improved data encryption and user authentication. Both WPA and WPA2 improve data encryption by using Temporal Key Integrity Protocol
(TKIP), Message Integrity Check (MIC) and IEEE 802.1x. WPA and WPA2 use Advanced Encryption Standard (AES) in the Counter mode with Cipher block chaining Message authentication code Protocol (CCMP) to offer stronger encryption than TKIP. If both an AP and the wireless clients support WPA2 and you have an external RADIUS server, use WPA2 for stronger data encryption. If you don't have an external RADIUS server, you should use WPA2-PSK (WPA2-Pre-Shared Key) that only requires a single (identical) password entered into each access point, wireless gateway and wireless client. As long as the passwords match, a wireless client will be granted access to a WLAN. If the AP or the wireless clients do not support WPA2, just use WPA or WPA-PSK depending on whether you have an external RADIUS server or not. Select WEP only when the AP and/or wireless clients do not support WPA or WPA2. WEP is less secure than WPA or WPA2. 32 Chapter 3 Wireless LAN Network ZyXEL G-210H Users Guide CHAPTER 4 Wireless Station Mode Configuration This chapter shows you how to configure your G-210H in wireless station mode. See Chapter 5 on page 47 for how to configure the G-210H in access point mode. 4.1 Wireless Station Mode Overview The G-210H acts as a client bridge from the computer over to the Access Point in whats known as station mode. 4.1.1 ZyXEL Utility Screen Summary This section describes the ZyXEL utility screens when the G-210H is in station mode. Figure 15 ZyXEL Utility Menu Summary: Station Mode The following table describes the menus. Table 2 ZyXEL Utility Menu Summary: Station Mode TAB Station Mode Link Info Site Survey Profile Adapter DESCRIPTION Use this screen to see your current connection status, configuration and data rate statistics. Use this screen to Use this screen to add, delete, edit or activate a profile with a set of wireless and security settings. Use this screen to configure a transfer rate and enable power saving. scan for a wireless network configure wireless security (if activated on the selected network). connect to a wireless network. Chapter 4 Wireless Station Mode Configuration 33 ZyXEL G-210H Users Guide 4.2 The Link Info Screen When the ZyXEL utility starts, the Link Info screen displays, showing the current configuration and connection status of your G-210H. Figure 16 Station Mode: Link Info The following table describes the labels in this screen. Table 3 Station Mode: Link Info LABEL Wireless Network Status Profile Name Network Name
(SSID) AP MAC Address Network Type Channel Link Speed Throughput Total Transmit Total Receive Signal Strength DESCRIPTION This is the name of the profile you are currently using. The SSID identifies the wireless network to which a wireless station is associated. This field displays the name of the wireless device to which the G-210H is associated. This field displays the MAC address of the AP or peer computer to which the G-
210H is associated. This field displays the network type (Infrastructure or Ad-Hoc) of the wireless network. This field displays the radio channel the G-210H is currently using. This field displays the current maximum connection speed in Megabits per second
(Mbps). This field displays the current data transmission rates in kilobits per second (Kbps). This field displays the total number of data frames transmitted. This field displays the total number of data frames received. The status bar shows the strength of the signal. The signal strength mainly depends on the antenna output power and the distance between your G-210H and the AP or peer computer. 34 Chapter 4 Wireless Station Mode Configuration ZyXEL G-210H Users Guide Table 3 Station Mode: Link Info (continued) LABEL Link Quality Noise Level DESCRIPTION The status bar shows the quality of wireless connection. This refers to the percentage of packets transmitted successfully. If there are too many wireless stations in a wireless network, collisions may occur which could result in a loss of messages even though you have high signal strength. This field displays the noise level that the G-210H is detecting while linked with the connected AP. 4.3 The Site Survey Screen Use the Site Survey screen to scan for and connect to a wireless network automatically. Figure 17 Station Mode: Site Survey The following table describes the labels in this screen. Table 4 Station Mode: Site Survey LABEL Available Network List DESCRIPTION Click a column heading to sort the entries.
, or
. denotes that the wireless device is in infrastructure mode and the wireless security is activated. denotes that the wireless device is in infrastructure mode but the wireless security is deactivated. denotes that the wireless device is in Ad-Hoc mode and the wireless security is activated. denotes that the wireless device is in Ad-Hoc mode but the wireless security is deactivated. SSID This field displays the SSID (Service Set IDentifier) of each wireless device. Chapter 4 Wireless Station Mode Configuration 35 ZyXEL G-210H Users Guide Table 4 Station Mode: Site Survey (continued) LABEL Channel Signal Scan Connect Add Network Type Channel Security MAC address DESCRIPTION This field displays the channel number used by each wireless device. This field displays the signal strength of each wireless device. Click Scan to search for available wireless devices within transmission range. Click Connect to associate to the selected wireless device. Click Add to create a new profile. This field displays the network type (Infrastructure or Ad Hoc) of the wireless device. This field displays the channel number used by each wireless device. This field shows whether data encryption is activated (WEP (WEP or 802.1x), WPA, WPA-PSK, WPA2, WPA2-PSK) or inactive (DISABLE). This field displays the MAC address of the wireless device. 4.3.1 Security Settings When you configure the G-210H to connect to a network with wireless security activated and the security settings are disabled on the G-210H, the screen varies according to the encryption method used by the selected network. 4.3.1.1 WEP Encryption Figure 18 Station Mode: Security Setting: WEP The following table describes the labels in this screen. Table 5 Station Mode: Security Setting: WEP LABEL Security Settings Authentication Transmit Key DESCRIPTION Select an authentication method. Choices are AES or TKIP, please choose according to the type selected on the Access Point. Select a default WEP key to use for data encryption. The key displays in the field below. 36 Chapter 4 Wireless Station Mode Configuration Table 5 Station Mode: Security Setting: WEP (continued) ZyXEL G-210H Users Guide LABEL Key x (where x is a number between 1 and 4) Back Save Exit DESCRIPTION Enter the WEP key in the field provided. If you select 64 Bits in the WEP field. Enter either 10 hexadecimal digits in the range of A-F, a-f and 0-9 (for example, 11AA22BB33) for HEX key type. or Enter 5 ASCII characters (case sensitive) ranging from a-z, A-Z and 0-9
(for example, MyKey) for ASCII key type. If you select 128 Bits in the WEP field, Enter either 26 hexadecimal digits in the range of A-F, a-f and 0-9 (for example, 00112233445566778899AABBCC) for HEX key type or Enter 13 ASCII characters (case sensitive) ranging from a-z, A-Z and 0-9
(for example, MyKey12345678) for ASCII key type. Note: The values for the WEP keys must be set up exactly the same on all wireless devices in the same wireless LAN. ASCII WEP keys are case sensitive. Click Back to go to the Site Survey screen to select and connect to another network. Click Save to confirm your selections and advance to the next screen. Click Exit to return to the Site Survey screen without saving. 4.3.1.2 WPA-PSK/WPA2-PSK Figure 19 Station Mode: Security Setting: WPA-PSK/WPA2-PSK Chapter 4 Wireless Station Mode Configuration 37 ZyXEL G-210H Users Guide The following table describes the labels in this screen. Table 6 Station Mode: Security Setting: WPA-PSK/WPA2-PSK LABEL Encryption Pre-Shared Key Back Save Exit DESCRIPTION The encryption mechanisms used for WPA/WPA2 and WPA-PSK/WPA2-PSK are the same. The only difference between the two is that WPA-PSK/WPA2-PSK uses a simple common password, instead of user-specific credentials. Select the encryption type (TKIP or AES) for data encryption. Refer to Section 3.2.3 on page 30 for more information. Type a pre-shared key (same as the AP or peer device) of between 8 and 63 case-
sensitive ASCII characters (including spaces and symbols) or 64 hexadecimal characters. Click Back to go to the Site Survey screen to select and connect to another network. Click Next to confirm your selections and advance to the next screen. Click Exit to return to the Site Survey screen without saving. 4.3.1.3 WPA/WPA2 Figure 20 Station Mode: Security Settings: WPA/WPA2 38 Chapter 4 Wireless Station Mode Configuration ZyXEL G-210H Users Guide The following table describes the labels in these screens. Table 7 Station Mode: Security Setting: WPA/WPA2 LABEL Encryption Authentication Type Session Resumption Login Name Password Certificate Server CA PEAP Inner EAP Back Save Exit DESCRIPTION The encryption mechanisms used for WPA/WPA2 and WPA-PSK/WPA2-PSK are the same. The only difference between the two is that WPA-PSK/WPA2-PSK uses a simple common password, instead of user-specific credentials. Select the encryption type (TKIP or AES) for data encryption. Refer to Section 3.2.3 on page 30 for more information. The type of authentication you use depends on the RADIUS server or AP. Select an authentication method from the drop down list. Options are TLS, TTLS and PEAP. Select either Enable or Disable depending on whether or not you wish for the utility to reconnect your session to the server when your session is over. Enter a user name. This is the user name that you or an administrator set up on a RADIUS server. This field is not available when you select TLS in the Authentication Type field. Enter the password associated with the user name above. This field is only available when you select TLS in the Authentication Type field. Click Browse to select a certificate. Note: You must first have a wired connection to a network and obtain the certificate(s) from a certificate authority (CA). Consult your network administrator for more information. Select a certificate authority (CA) from the drop-down box to have the G-210H trust certificates from that CA only. Select Trust Any to accept certificates from any CA. This field is only available when you select PEAP in the Authentication Type field. The PEAP method used by the RADIUS server or AP for client authentication are EAP_TLS and EAP MS CHAP v2. Click Back to go to the Site Survey screen to select and connect to another network. Click Save to confirm your selections and advance to the next screen. Refer to Section 4.3.2 on page 47. Click Exit to return to the Site Survey screen without saving. 4.3.1.4 IEEE 802.1x Configure IEEE 802.1x security with various authentication methods in this screen. Chapter 4 Wireless Station Mode Configuration 39 ZyXEL G-210H Users Guide Figure 21 Station Mode: Security Setting: 802.1x The following table describes the labels in these screens. Table 8 Station Mode: Security Settings: IEEE 802.1x LABEL Authentication Type Session Resumption Login Name Password Certificate DESCRIPTION The type of authentication you use depends on the RADIUS server or AP. Select an authentication method from the drop down list. Options are TLS, TTLS and PEAP. Select either Enable or Disable depending on whether or not you wish for the utility to reconnect your session to the server when your session is over. Enter a user name. This is the user name that you or an administrator set up on a RADIUS server. This field is not available when you select TLS in the Authentication Type field. Enter the password associated with the user name above. This field is only available when you select TLS in the Authentication Type field. Click Browse to select a certificate. Note: You must first have a wired connection to a network and obtain the certificate(s) from a certificate authority (CA). Consult your network administrator for more information. Server CA Select a certificate authority (CA) from the drop-down box to have the G-210H trust certificates from that CA only. Select Trust Any to accept certificates from any CA. 40 Chapter 4 Wireless Station Mode Configuration ZyXEL G-210H Users Guide Table 8 Station Mode: Security Settings: IEEE 802.1x LABEL PEAP Inner EAP Validate Server Certificate Certificate Issuer Must Be Server Name Must Be Back Save Exit DESCRIPTION This field is only available when you select PEAP in the Authentication Type field. The PEAP method used by the RADIUS server or AP for client authentication is MS CHAP v2. Check this box to open up the rest of the Certificate selection menu. From the drop down menu, please select the appropriate certificate issuer or if you are uncertain, then select Any Trusted CA You must specify the name of the server that the certificate is connecting to. Please type in the server name and then select the appropriate bullet below when finished typing the name in. Click Back to go to the Site Survey screen to select and connect to another network. Click Save to confirm your selections and advance to the next screen. Refer to Section 4.3.2 on page 47. Click Exit to return to the Site Survey screen without saving. 4.4 The Profile Screen A profile is a set of wireless parameters that you need to connect to a wireless network. With a profile activated, each time you start the G-210H, it automatically scans for the specific SSID and joins that network with the pre-defined wireless security settings. If the specified network is not available, the G-210H cannot connect to a network. If you do not configure and activate a profile, each time you start the G-210H, the G-210H uses the default profile to connect to any available network that has no security enabled. The default profile is a profile that allows you to connect to any SSID that has no security enabled. Click the Profile tab in the ZyXEL utility program to display the Profile screen as shown next. The profile function allows you to save the wireless network settings in this screen, or use one of the pre-configured network profiles. Chapter 4 Wireless Station Mode Configuration 41 ZyXEL G-210H Users Guide Figure 22 Station Mode: Profile The following table describes the labels in this screen. Table 9 Station Mode: Profile LABEL Profile List
. or Profile Name SSID Connect Add Delete Edit Network Type Channel Security DESCRIPTION Click a column heading to sort the entries. denotes that the wireless device is in infrastructure mode and the wireless security is activated. denotes that the wireless device is in infrastructure mode but the wireless security is deactivated. denotes that the wireless device is in Ad-hoc mode and the wireless security is activated. denotes that the wireless device is in Ad-hoc mode but the wireless security is deactivated. This is the name of the pre-configured profile. This is the SSID of the wireless network to which the selected profile associate. To use and activate a previously saved network profile, select a pre-configured profile name in the table and click Connect. To add a new profile into the table, click Add. To delete an existing wireless network configuration, select a profile in the table and click Delete. To edit an existing wireless network configuration, select a profile in the table and click Edit. This field displays the network type (Infrastructure or Ad-hoc) of the profile. This field displays the channel number used by the profile. This field shows whether data encryption is activated (WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, 802.1x) or inactive (DISABLE). 42 Chapter 4 Wireless Station Mode Configuration ZyXEL G-210H Users Guide 4.4.1 Adding a New Profile Follow the steps below to add a new profile. 1 Click Add in the Profile screen. An Add New Profile screen displays as shown next. Click Next to continue. Figure 23 Station Mode: Profile: Add a New Profile The following table describes the labels in this screen. Table 10 Station Mode: Profile: Add a New Profile LABEL Add New Profile Profile Name SSID DESCRIPTION Enter a descriptive name in this field. Select an available wireless device in the Scan Info table and click Select, or enter the SSID of the wireless device to which you want to associate in this field manually. Otherwise, enter Any to have the G-210H associate to any AP or roam between any infrastructure wireless networks. Chapter 4 Wireless Station Mode Configuration 43 ZyXEL G-210H Users Guide Table 10 Station Mode: Profile: Add a New Profile (continued) LABEL Network Type Power Saving Mode Security Next Save Exit DESCRIPTION Select Infrastructure to associate to an AP. Select Ad-hoc to associate to a peer computer. Choose from Constantly Awake Mode (CAM) or Power Saving Mode depending on the type of usage you would like the computer to be in while connecting using this profile. Please choose from the appropriate security for the Access Point. Follow the subsequent screens accordingly. Click Next to go to the next screen. Click Save to confirm your selections and advance to the next screen. Refer to Section 4.3.2 on page 47. Click Exit to go back to the previous screen without saving. 2 If you select the Infrastructure network type in the previous screen, skip to step 3. If you select the Ad-Hoc network type in the previous screen, a screen displays as follows. Select a wireless frequency and channel number and click Next to continue. Note: To associate to an Ad-hoc network, you must use the same channel and wireless frequency as the peer computer. Figure 24 Station Mode: Profile: Wireless Settings 3 The screen varies depending on the encryption method you select in the previous screen. The settings must be exactly the same on the APs or other peer wireless computers as they are on the G-210H. Refer to Section 4.3.1 on page 36 for detailed information on wireless security configuration. 44 Chapter 4 Wireless Station Mode Configuration Figure 25 Station Mode: Profile: Security Settings ZyXEL G-210H Users Guide 4 To use this network profile, click the Activate Now button. Otherwise, click the Activate Later button. You can activate only one profile at a time. Note: Once you activate a profile, the ZyXEL utility will use that profile the next time it is started. Figure 26 Station Mode: Profile: Activate the Profile 4.5 The Adapter Screen To set the other advanced features on the G-210H, click the Adapter tab. Chapter 4 Wireless Station Mode Configuration 45 ZyXEL G-210H Users Guide Figure 27 Station Mode: Adapter The following table describes the labels in this screen. Table 11 Station Mode: Adapter LABEL Adapter Setting Transfer Rate DESCRIPTION In most networking scenarios, the factory default Auto setting is the most efficient and allows your G-210H to operate at the highest possible transmission (data) rate. If you want to select a specific transmission rate, select one that the AP or peer wireless device supports. Note: With USB1.0/1.1, the G-210H can only transmit at up to 11Mbps. Wireless Mode 11B/G Protection Enable Tx Burst Fast Roaming at Enable WMM Save Select the wireless mode you wish to have the G-210H transmit in. Available options are to be transmitting in 802.11B/G Mixed mode which will alternate between 802.11B and 802.11G depending on the network environment, or 802.11B Only which will force the G-210H to broadcast in 802.11B network only. The factory default setting is on Auto which is the most efficient and will allow your G-210H to automatically configure the network settings to best navigate through interfering networks. Transmission bursting is a method that can boost performance by pushing high number of frames of data per transmission packet. Check this box to enable this feature. Fast Roaming is a feature that allows your G-210H to search for Access Points while youre moving at a faster rate. Select at which dBm you wish for this feature to activate with the drop down menu WMM is the WiFi standard for wireless Quality of Service. Click on this button and then select from the two available check boxes Direct Link and WMM-Power Save Enable. Click Save to save the changes to the G-210H. 46 Chapter 4 Wireless Station Mode Configuration ZyXEL G-210H Users Guide CHAPTER 5 Maintenance This chapter describes how to uninstall or upgrade the ZyXEL utility. 5.1 The About Screen The About screen displays driver and utility version numbers of the G-210H. To display the screen shown below, click the about (
) button. Figure 28 About The following table describes the read-only fields in this screen. Table 12 About LABEL Driver Version Utility Version DESCRIPTION This field displays the version number of the G-210H driver. This field displays the version number of the ZyXEL utility. 5.2 Uninstalling the ZyXEL Utility Follow the steps below to remove (or uninstall) the ZyXEL utility from your computer. 1 Click Start, (All) Programs, ZyXEL G-210H Wireless USB Adapter Utility, Uninstall ZyXEL G-210H Wireless USB Adapter Utility. Chapter 5 47 ZyXEL G-210H Users Guide 2 Click Finish to complete uninstalling the software and restart the computer when prompted. Figure 29 Uninstall: Finish 5.3 Upgrading the ZyXEL Utility Note: Before you uninstall the ZyXEL utility, take note of your current wireless configurations. To perform the upgrade, follow the steps below. 1 Download the latest version of the utility from the ZyXEL web site and save the file on your computer. 2 Follow the steps in Section 5.2 on page 47 to remove the current ZyXEL utility from your computer. 3 Restart your computer when prompted. 4 Disconnect the G-210H from your computer. 5 Double-click on the setup program for the new utility to start the ZyXEL utility installation. 6 Insert the G-210H and check the version numbers in the About screen to make sure the new utility is installed properly. 48 Chapter 5 Maintenance ZyXEL G-210H Users Guide CHAPTER 6 Troubleshooting This chapter covers potential problems and the possible remedies. After each problem description, some instructions are provided to help you to diagnose and to solve the problem. 6.1 Problems Starting the ZyXEL Utility Table 13 Troubleshooting Starting ZyXEL Utility PROBLEM Cannot start the ZyXEL Wireless LAN utility The ZyXEL utility icon does not display. CORRECTIVE ACTION Make sure the G-210H is properly inserted and the LED is on. Refer to the Quick Start Guide for the LED descriptions. Use the Device Manager to check for possible hardware conflicts. Click Start, Settings, Control Panel, System, Hardware and Device Manager. Verify the status of the G-210H under Network Adapter. (Steps may vary depending on the version of Windows). Install the G-210H in another computer. If the error persists, you may have a hardware problem. In this case, you should contact your local vendor. Uninstall the utility from the computer, and try reinstalling it from the accompanying CD once more. If the error persists, please contact our technical support staff. 6.2 Problem with the Link Quality Table 14 Troubleshooting Link Quality PROBLEM The link quality and/or signal strength is poor all the time. CORRECTIVE ACTION Search and connect to another AP with a better link quality using the Site Survey screen. Move your computer closer to the AP or the peer computer(s) within the transmission range. There may be too much radio interference (for example microwave or another AP using the same channel) around your wireless network. Lower the output power of each AP. Make sure there are not too many wireless stations connected to a wireless network. Chapter 6 Troubleshooting 49 ZyXEL G-210H Users Guide 6.3 Problems Communicating With Other Computers Table 15 Troubleshooting Communication Problem PROBLEM The G-210H installed cannot communicate with the other computer(s). CORRECTIVE ACTION In Infrastructure Mode Make sure that the AP and the associated computers are turned on and working properly. Make sure the G-210H computer and the associated AP use the same SSID. Change the AP and the associated wireless clients to use another radio channel if interference is high. Make sure that the computer and the AP share the same security option and key. Verify the settings in the Profile Security Setting screen. If you are using WPA(2) or WPA(2)-PSK security, try changing your encryption type from TKIP to AES or vice versa. In Ad-Hoc (IBSS) Mode Verify that the peer computer(s) is turned on. Make sure the G-210H computer and the peer computer(s) are using the same SSID and channel. Make sure that the computer and the peer computer(s) share the same security settings. Change the wireless clients to use another radio channel if interference is high. 50 Chapter 6 Troubleshooting ZyXEL G-210H Users Guide APPENDIX A Product Specifications Table 16 Product Specifications PHYSICAL AND ENVIRONMENTAL Product Name Interface Standards Antenna Configuration Network Architectures Operating Frequencies Operating Channels Data Rate Modulation Operating Temperature Storage Temperature Operating Humidity Storage Humidity Power Voltage Weight Dimension RADIO SPECIFICATIONS Media Access Protocol Frequency Channels ZyXEL G-210H 802.11g High Power Wireless USB Adapter USB 2.0 compatible IEEE 802.11b IEEE 802.11g 5dBi Directional Diversity Antenna Infrastructure Ad-Hoc IEEE 802.11b/g: 2.4 - 2.4835GHz IEEE 802.11b: 11 channels (North America) IEEE 802.11g: 11 channels (North America) IEEE 802.11b: 13 channels (Europe) IEEE 802.11g: 13 channels (Europe) IEEE 802.11b: 13 channels (Japan) IEEE 802.11g: 13 channels (Japan) IEEE 802.11b: 11, 5.5, 2, 1Mbps IEEE 802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps IEEE 802311b: Direct Sequence Spread Spectrum (CCK, DQPSK, DBPSK). IEEE 802.11g: Orthogonal Frequency Division Multiplexing 0 ~ 55 degrees Centigrade
-20 ~ 70 degrees Centigrade 20 ~ 90% (non-condensing) 20 ~ 90% (non-condensing) TX power consumption: < 290mA RX power consumption: < 220mA 5V 35g
(L) 111 mm (W) 35 mm (H) 12 mm IEEE 802.11 Industrial Scientific Medical Band 2.4 ~ 2.484 GHz (IEEE 802.11b/g) 1 ~ 11 channels (USA, Canada and Taiwan) 1 ~ 13 channels (Europe) 1 ~ 13 channels (Japan) Appendix A 51 ZyXEL G-210H Users Guide Table 16 Product Specifications (continued) Data Rate Modulation Output Power RX Sensitivity 54 Mbps with automatic fallback to 48, 36, 24, 18, 12, 9 and 6 Mbps IEEE 802.11b: CCK, DQPSK, DBPSK IEEE 802.11g: OFDM IEEE 802.11b:
11dBm (+/- 1.5dBm) at 11Mbps IEEE 802.11g:
14dBm (+/- 1dBm) at 54Mbps IEEE 802.11b: 11 Mbps: -85 dBm IEEE 802.11g: 54 Mbps: -69 dBm SOFTWARE SPECIFICATIONS Device Drivers Security Roaming Windows 2000, XP, Vista, Mac OS X 10.3 or Higher 64/128-bit WEP WPA/WPA-PSK/WPA2/WPA2-PSK IEEE 802.1x IEEE 802.11b/g compliant 52 Appendix A ZyXEL G-210H Users Guide APPENDIX B Management with Wireless Zero Configuration This appendix shows you how to manage your G-210H using the Windows XP Wireless Zero Configuration tool. Be sure you have the Windows XP service pack 2 installed on your computer. Otherwise, you should at least have the Windows XP service pack 1 already on your computer and download the support patch for WPA from the Microsoft web site. Windows XP SP2 screen shots are shown unless otherwise specified. Click the help icon (
) in most screens, move the cursor to the item that you want the information about and click to view the help. Activating Windows Wireless Zero Configuration Make sure the Use Windows to configure my wireless network settings check box is selected in the Wireless Network Connection Properties screen. Refer to Appendix A on page 45. If you see the following screen, refer to article 871122 on the Microsoft web site for information on starting WZC. Figure 30 Windows XP SP2: WZC Not Available Appendix B 53 ZyXEL G-210H Users Guide Connecting to a Wireless Network 1 Double-click the network icon for wireless connections in the system tray to open the Wireless Network Connection Status screen. Figure 31 Windows XP SP2: System Tray Icon The type of the wireless network icon in Windows XP SP2 indicates the status of the G-210H. Refer to the following table for details. Table 17 Windows XP SP2: System Tray Icon ICON DESCRIPTION The G-210H is connected to a wireless network. The G-210H is in the process of connecting to a wireless network. The connection to a wireless network is limited because the network did not assign a network address to the computer. The G-210H is not connected to a wireless network. 2 Windows XP SP2: In the Wireless Network Connection Status screen, click View Wireless Networks to open the Wireless Network Connection screen. Figure 32 Windows XP SP2: Wireless Network Connection Status 54 Appendix B ZyXEL G-210H Users Guide Windows XP SP1: In the Wireless Network Connection Status screen, click Properties and the Wireless Networks tab to open the Wireless Network Connection Properties screen. Figure 33 Windows XP SP1: Wireless Network Connection Status 3 Windows XP SP2: Click Refresh network list to reload and search for available wireless devices within transmission range. Select a wireless network in the list and click Connect to join the selected wireless network. Figure 34 Windows XP SP2: Wireless Network Connection Appendix B 55 ZyXEL G-210H Users Guide The following table describes the icons in the wireless network list. Table 18 Windows XP SP2: Wireless Network Connection ICON DESCRIPTION This denotes that wireless security is activated for the wireless network. This denotes that this wireless network is your preferred network. Ordering your preferred networks is important because the G-210H tries to associate to the preferred network first in the order that you specify. Refer to the section on ordering the preferred networks for detailed information. This denotes the signal strength of the wireless network. Move your cursor to the icon to see details on the signal strength. Windows XP SP1: Click Refresh to reload and search for available wireless devices within transmission range. Select a wireless network in the Available networks list, click Configure and set the related fields to the same security settings as the associated AP to add the selected network into the Preferred networks table. Click OK to join the selected wireless network. Refer to the section on security settings (discussed later) for more information. Figure 35 Windows XP SP1: Wireless Network Connection Properties 4 4.Windows XP SP2: If the wireless security is activated for the selected wireless network, the Wireless Network Connection screen displays. You must set the related fields in the Wireless Network Connection screen to the same security settings as the associated AP and click Connect. Refer to the section about security settings for more information. Otherwise click Cancel and connect to another wireless network without data encryption. 56 Appendix B ZyXEL G-210H Users Guide If there is no security activated for the selected wireless network, a warning screen appears. Click Connect Anyway if wireless security is not your concern. Figure 36 Windows XP SP2: Wireless Network Connection: WEP or WPA-PSK Figure 37 Windows XP SP2: Wireless Network Connection: No Security 5 Verify that you have successfully connected to the selected network and check the connection status in the wireless network list or the connection icon in the Preferred networks or Available networks list. The following table describes the connection icons. Table 19 Windows XP: Wireless Networks ICON DESCRIPTION This denotes the wireless network is an available wireless network. This denotes the G-210H is associated to the wireless network. This denotes the wireless network is not available. Security Settings When you configure the G-210H to connect to a secure network but the security settings are not yet enabled on the G-210H, you will see different screens according to the authentication and encryption methods used by the selected network. Association Select a network in the Preferred networks list and click Properties to view or configure security. Appendix B 57 ZyXEL G-210H Users Guide Figure 38 Windows XP: Wireless (network) properties: Association The following table describes the labels in this screen. Table 20 Windows XP: Wireless (network) properties: Association LABEL Network name
(SSID) Network Authentication Data Encryption Network Key Confirm network key Key index
(advanced) The key is provided for me automatically This is a computer-to-
computer (ad hoc) network; wireless access points are not used OK Cancel DESCRIPTION This field displays the SSID (Service Set IDentifier) of each wireless network. This field automatically shows the authentication method (Share, Open, WPA, WPA2 or WPA-PSK, WPA2-PSK) used by the selected network. This field automatically shows the encryption type (AES, TKIP, WEP or Disable) used by the selected network. Enter the pre-shared key or WEP key. The values for the keys must be set up exactly the same on all wireless devices in the same wireless LAN. Enter the key again for confirmation. Select a default WEP key to use for data encryption. This field is available only when the network use WEP encryption method and the The key is provided for me automatically check box is not selected. If this check box is selected, the wireless AP assigns the G-210H a key. If this check box is selected, you are connecting to another computer directly. Click OK to save your changes. Click Cancel to leave this screen without saving any changes you may have made. 58 Appendix B ZyXEL G-210H Users Guide Authentication Click the Authentication tab in the Wireless (network) properties screen to display the screen shown next. The fields on this screen are grayed out when the network is in Ad-Hoc mode or data encryption is disabled. Figure 39 Windows XP: Wireless (network) properties: Authentication The following table describes the labels in this screen. Table 21 Windows XP: Wireless (network) properties: Authentication LABEL Enable IEEE 802.1x authentication for this network EAP Type Properties Authenticate as computer when computer information is available Authenticate as guest when user or computer information is unavailable OK Cancel DESCRIPTION This field displays whether the IEEE 802.1x authentication is active. If the network authentication is set to Open in the previous screen, you can choose to disable or enable this feature. Select the type of EAP authentication. Options are Protected EAP (PEAP) and Smart Card or other Certificate. Click this button to open the properties screen and configure certificates. The screen varies depending on what you select in the EAP type field. Select this check box to have the computer send its information to the network for authentication when a user is not logged on. Select this check box to have the computer access to the network as a guest when a user is not logged on or computer information is not available. Click OK to save your changes. Click Cancel to leave this screen without saving any changes you may have made. Appendix B 59 ZyXEL G-210H Users Guide Authentication Properties Select an EAP authentication type in the Wireless (network) properties: Authentication screen and click the Properties button to display the following screen. Protected EAP Properties Figure 40 Windows XP: Protected EAP Properties The following table describes the labels in this screen. Table 22 Windows XP: Protected EAP Properties LABEL Validate server certificate Connect to these servers Trusted Root Certification Authorities:
Do not prompt user to authorize new server or trusted certification authorities. Select Authentication Method:
DESCRIPTION Select the check box to verify the certificate of the authentication server. Select the check box and specify a domain in the field below to have your computer connect to a server which resides only within this domain. Select a trusted certification authority from the list below. Note: You must first have a wired connection to a network and obtain the certificate(s) from a certificate authority (CA). Consult your network administrator for more information. Select this check box to verify a new authentication server or trusted CA without prompting. This field is available only if you installed the Windows XP server pack 2. Select an authentication method from the drop-down list box and click Configure to do settings. 60 Appendix B ZyXEL G-210H Users Guide Table 22 Windows XP: Protected EAP Properties LABEL Enable Fast Reconnect OK Cancel DESCRIPTION Select the check box to automatically reconnect to the network (without re-
authentication) if the wireless connection goes down. Click OK to save your changes. Click Cancel to leave this screen without saving any changes you may have made. Smart Card or other Certificate Properties Figure 41 Windows XP: Smart Card or other Certificate Properties The following table describes the labels in this screen. Table 23 Windows XP: Smart Card or other Certificate Properties DESCRIPTION Select this check box to use a certificate on your computer for authentication. LABEL Use my smart card Select this check box to use the smart card for authentication. Use a certificate on this computer Validate server certificate Connect to these servers Trusted Root Certification Authorities:
Select the check box and specify a domain in the field below to have your computer connect to a server which resides only within this domain. Select a trusted certification authority from the list below. Select the check box to check the certificate of the authentication server. Note: You must first have a wired connection to a network and obtain the certificate(s) from a certificate authority (CA). Consult your network administrator for more information. View Certificate Click this button if you want to verify the selected certificate. Appendix B 61 ZyXEL G-210H Users Guide Table 23 Windows XP: Smart Card or other Certificate Properties LABEL Use a different user name for the connection:
OK Cancel DESCRIPTION Select the check box to use a different user name when the user name in the smart card or certificate is not the same as the user name in the domain that you are logged on to. Click OK to save your changes. Click Cancel to leave this screen without saving any changes you may have made. Ordering the Preferred Networks Follow the steps below to manage your preferred networks. 1 Windows XP SP2: Click Change the order of preferred networks in the Wireless Network Connection screen (see Figure 34 on page 55). The screen displays as shown. Figure 42 Windows XP SP2: Wireless Networks: Preferred Networks Windows XP SP1: In the Wireless Network Connection Status screen, click Properties and the Wireless Networks tab to open the screen as shown. 62 Appendix B Figure 43 Windows XP SP1: Wireless Networks: Preferred Networks ZyXEL G-210H Users Guide 2 Whenever the G-210H tries to connect to a new network, the new network is added in the Preferred networks table automatically. Select a network and click Move up or Move down to change it's order, click Remove to delete it or click Properties to view the security, authentication or connection information of the selected network. Click Add to add a preferred network into the list manually. Appendix B 63 ZyXEL G-210H Users Guide 64 Appendix B ZyXEL G-210H Users Guide APPENDIX C Wireless Security Types of EAP Authentication This section discusses some popular authentication types: EAP-MD5, EAP-TLS, EAP-TTLS, PEAP and LEAP. Your wireless LAN device may not support all authentication types. EAP (Extensible Authentication Protocol) is an authentication protocol that runs on top of the IEEE 802.1x transport mechanism in order to support multiple types of user authentication. By using EAP to interact with an EAP-compatible RADIUS server, an access point helps a wireless station and a RADIUS server perform authentication. The type of authentication you use depends on the RADIUS server and an intermediary AP(s) that supports IEEE 802.1x. For EAP-TLS authentication type, you must first have a wired connection to the network and obtain the certificate(s) from a certificate authority (CA). A certificate (also called digital IDs) can be used to authenticate users and a CA issues certificates and guarantees the identity of each certificate owner. EAP-MD5 (Message-Digest Algorithm 5) MD5 authentication is the simplest one-way authentication method. The authentication server sends a challenge to the wireless station. The wireless station proves that it knows the password by encrypting the password with the challenge and sends back the information. Password is not sent in plain text. However, MD5 authentication has some weaknesses. Since the authentication server needs to get the plaintext passwords, the passwords must be stored. Thus someone other than the authentication server may access the password file. In addition, it is possible to impersonate an authentication server as MD5 authentication method does not perform mutual authentication. Finally, MD5 authentication method does not support data encryption with dynamic session key. You must configure WEP encryption keys for data encryption. Appendix C 65 ZyXEL G-210H Users Guide EAP-TLS (Transport Layer Security) With EAP-TLS, digital certifications are needed by both the server and the wireless stations for mutual authentication. The server presents a certificate to the client. After validating the identity of the server, the client sends a different certificate to the server. The exchange of certificates is done in the open before a secured tunnel is created. This makes user identity vulnerable to passive attacks. A digital certificate is an electronic ID card that authenticates the senders identity. However, to implement EAP-TLS, you need a Certificate Authority (CA) to handle certificates, which imposes a management overhead. EAP-TTLS (Tunneled Transport Layer Service) EAP-TTLS is an extension of the EAP-TLS authentication that uses certificates for only the server-side authentications to establish a secure connection. Client authentication is then done by sending username and password through the secure connection, thus client identity is protected. For client authentication, EAP-TTLS supports EAP methods and legacy authentication methods such as PAP, CHAP, MS-CHAP and MS-CHAP v2. PEAP (Protected EAP) Like EAP-TTLS, server-side certificate authentication is used to establish a secure connection, then use simple username and password methods through the secured connection to authenticate the clients, thus hiding client identity. However, PEAP only supports EAP methods, such as EAP-MD5, EAP-MSCHAPv2 and EAP-GTC (EAP-Generic Token Card), for client authentication. EAP-GTC is implemented only by Cisco. LEAP LEAP (Lightweight Extensible Authentication Protocol) is a Cisco implementation of IEEE 802.1x. Dynamic WEP Key Exchange The AP maps a unique key that is generated with the RADIUS server. This key expires when the wireless connection times out, disconnects or reauthentication times out. A new WEP key is generated each time reauthentication is performed. If this feature is enabled, it is not necessary to configure a default encryption key in the Wireless screen. You may still configure and store keys here, but they will not be used while Dynamic WEP is enabled. Note: EAP-MD5 cannot be used with Dynamic WEP Key Exchange 66 Appendix C ZyXEL G-210H Users Guide For added security, certificate-based authentications (EAP-TLS, EAP-TTLS and PEAP) use dynamic keys for data encryption. They are often deployed in corporate environments, but for public deployment, a simple user name and password pair is more practical. The following table is a comparison of the features of authentication types. Table 24 Comparison of EAP Authentication Types Mutual Authentication Certificate Client Certificate Server Dynamic Key Exchange Credential Integrity Deployment Difficulty Client Identity Protection EAP-MD5 No No No No None Easy No EAP-TLS Yes Yes Yes Yes Strong Hard No EAP-TTLS Yes Optional Yes Yes Strong Moderate Yes PEAP Yes Optional Yes Yes Strong Moderate Yes LEAP Yes No No Yes Moderate Moderate No WPA and WPA2 Wi-Fi Protected Access (WPA) is a subset of the IEEE 802.11i standard. WPA2 (IEEE 802.11i) is a wireless security standard that defines stronger encryption, authentication and key management than WPA. Key differences between WPA(2) and WEP are improved data encryption and user authentication. If both an AP and the wireless clients support WPA2 and you have an external RADIUS server, use WPA2 for stronger data encryption. If you don't have an external RADIUS server, you should use WPA2-PSK (WPA2-Pre-Shared Key) that only requires a single (identical) password entered into each access point, wireless gateway and wireless client. As long as the passwords match, a wireless client will be granted access to a WLAN. If the AP or the wireless clients do not support WPA2, just use WPA or WPA-PSK depending on whether you have an external RADIUS server or not. Select WEP only when the AP and/or wireless clients do not support WPA or WPA2. WEP is less secure than WPA or WPA2. Encryption Both WPA and WPA2 improve data encryption by using Temporal Key Integrity Protocol
(TKIP), Message Integrity Check (MIC) and IEEE 802.1x. WPA and WPA2 use Advanced Encryption Standard (AES) in the Counter mode with Cipher block chaining Message authentication code Protocol (CCMP) to offer stronger encryption than TKIP. Appendix C 67 ZyXEL G-210H Users Guide TKIP uses 128-bit keys that are dynamically generated and distributed by the authentication server. AES (Advanced Encryption Standard) is a block cipher that uses a 256-bit mathematical algorithm called Rijndael. They both include a per-packet key mixing function, a Message Integrity Check (MIC) named Michael, an extended initialization vector (IV) with sequencing rules, and a re-keying mechanism. WPA and WPA2 regularly change and rotate the encryption keys so that the same encryption key is never used twice. The RADIUS server distributes a Pairwise Master Key (PMK) key to the AP that then sets up a key hierarchy and management system, using the PMK to dynamically generate unique data encryption keys to encrypt every data packet that is wirelessly communicated between the AP and the wireless stations. This all happens in the background automatically. The Message Integrity Check (MIC) is designed to prevent an attacker from capturing data packets, altering them and resending them. The MIC provides a strong mathematical function in which the receiver and the transmitter each compute and then compare the MIC. If they do not match, it is assumed that the data has been tampered with and the packet is dropped. By generating unique data encryption keys for every data packet and by creating an integrity checking mechanism (MIC), with TKIP and AES it is more difficult to decrypt data on a Wi-Fi network than WEP and difficult for an intruder to break into the network. The encryption mechanisms used for WPA(2) and WPA(2)-PSK are the same. The only difference between the two is that WPA(2)-PSK uses a simple common password, instead of user-specific credentials. The common-password approach makes WPA(2)-PSK susceptible to brute-force password-guessing attacks but its still an improvement over WEP as it employs a consistent, single, alphanumeric password to derive a PMK which is used to generate unique temporal encryption keys. This prevent all wireless devices sharing the same encryption keys.
(a weakness of WEP) User Authentication WPA and WPA2 apply IEEE 802.1x and Extensible Authentication Protocol (EAP) to authenticate wireless stations using an external RADIUS database. WPA2 reduces the number of key exchange messages from six to four (CCMP 4-way handshake) and shortens the time required to connect to a network. Other WPA2 authentication features that are different from WPA include key caching and pre-authentication. These two features are optional and may not be supported in all wireless devices. Key caching allows a wireless client to store the PMK it derived through a successful authentication with an AP. The wireless client uses the PMK when it tries to connect to the same AP and does not need to go with the authentication process again. Pre-authentication enables fast roaming by allowing the wireless client (already connecting to an AP) to perform IEEE 802.1x authentication with another AP before connecting to it. 68 Appendix C ZyXEL G-210H Users Guide WPA(2)-PSK Application Example A WPA(2)s-PSK application looks as follows. 1 First enter identical passwords into the AP and all wireless clients. The Pre-Shared Key
(PSK) must consist of between 8 and 63 ASCII characters or 64 hexadecimal characters
(including spaces and symbols). 2 The AP checks each client's password and (only) allows it to join the network if it matches its password. 3 The AP and wireless clients use the pre-shared key to generate a common PMK. 4 The AP and wireless clients use the TKIP or AES encryption process to encrypt data exchanged between them. Figure 44 WPA-PSK Authentication WPA(2) with RADIUS Application Example You need the IP address of the RADIUS server, its port number (default is 1812), and the RADIUS shared secret. A WPA(2) application example with an external RADIUS server looks as follows. "A" is the RADIUS server. "DS" is the distribution system. 1 The AP passes the wireless client's authentication request to the RADIUS server. 2 The RADIUS server then checks the user's identification against its database and grants or denies network access accordingly. 3 The RADIUS server distributes a Pairwise Master Key (PMK) key to the AP that then sets up a key hierarchy and management system, using the pair-wise key to dynamically generate unique data encryption keys to encrypt every data packet that is wirelessly communicated between the AP and the wireless clients. Appendix C 69 ZyXEL G-210H Users Guide Figure 45 WPA(2) with RADIUS Application Example Security Parameters Summary Refer to this table to see what other security parameters you should configure for each Authentication Method/ key management protocol type. MAC address filters are not dependent on how you configure these security features. Table 25 Wireless Security Relational Matrix AUTHENTICATION METHOD/ KEY MANAGEMENT PROTOCOL Open Open Shared WPA WPA-PSK WPA2 WPA2-PSK ENCRYPTION METHOD ENTER MANUAL KEY IEEE 802.1X None WEP WEP TKIP/AES TKIP/AES TKIP/AES TKIP/AES No No Yes Yes No Yes Yes No Yes No Yes Disable Enable without Dynamic WEP Key Enable with Dynamic WEP Key Enable without Dynamic WEP Key Disable Enable with Dynamic WEP Key Enable without Dynamic WEP Key Disable Enable Disable Enable Disable 70 Appendix C ZyXEL G-210H Users Guide APPENDIX D Setting up Your Computers IP Address All computers must have a 10M or 100M Ethernet adapter card and TCP/IP installed. Windows 2000 and XP usually include TCP/IP. Configure the TCP/IP settings in order to "communicate" with your network. Windows 2000/XP 1 For Windows XP, click start, Control Panel. In Windows 2000/NT, click Start, Settings, Control Panel. Figure 46 Windows XP: Start Menu 2 For Windows XP, click Network Connections. For Windows 2000/NT, click Network and Dial-up Connections. Appendix D 71 ZyXEL G-210H Users Guide Figure 47 Windows XP: Control Panel 3 Right-click Local Area Connection and then click Properties. Figure 48 Windows XP: Control Panel: Network Connections: Properties 4 Select Internet Protocol (TCP/IP) (under the General tab in Win XP) and click Properties. 72 Appendix D Figure 49 Windows XP: Local Area Connection Properties ZyXEL G-210H Users Guide 5 The Internet Protocol TCP/IP Properties window opens (the General tab in Windows XP). If you have a dynamic IP address click Obtain an IP address automatically. If you have a static IP address click Use the following IP Address and fill in the IP address, Subnet mask, and Default gateway fields. Click Advanced. Appendix D 73 ZyXEL G-210H Users Guide Figure 50 Windows XP: Advanced TCP/IP Settings 6 If you do not know your gateway's IP address, remove any previously installed gateways in the IP Settings tab and click OK. Do one or more of the following if you want to configure additional IP addresses:
In the IP Settings tab, in IP addresses, click Add. In TCP/IP Address, type an IP address in IP address and a subnet mask in Subnet mask, and then click Add. Repeat the above two steps for each IP address you want to add. Configure additional default gateways in the IP Settings tab by clicking Add in Default gateways. In TCP/IP Gateway Address, type the IP address of the default gateway in Gateway. To manually configure a default metric (the number of transmission hops), clear the Automatic metric check box and type a metric in Metric. Click Add. Repeat the previous three steps for each default gateway you want to add. Click OK when finished. 7 In the Internet Protocol TCP/IP Properties window (the General tab in Windows XP):
Click Obtain DNS server address automatically if you do not know your DNS server IP address(es). 74 Appendix D ZyXEL G-210H Users Guide If you know your DNS server IP address(es), click Use the following DNS server addresses, and type them in the Preferred DNS server and Alternate DNS server fields. If you have previously configured DNS servers, click Advanced and then the DNS tab to order them. Figure 51 Windows XP: Internet Protocol (TCP/IP) Properties 8 Click OK to close the Internet Protocol (TCP/IP) Properties window. 9 Click OK to close the Local Area Connection Properties window. 10Restart your computer (if prompted). Verifying Settings 1 Click Start, All Programs, Accessories and then Command Prompt. 2 In the Command Prompt window, type "ipconfig" and then press [ENTER]. You can also open Network Connections, right-click a network connection, click Status and then click the Support tab. Appendix D 75 ZyXEL G-210H Users Guide 76 Appendix D ZyXEL G-210H Users Guide Index Disclaimer 3 Driver version 47 Dynamic WEP Key Exchange 66 E EAP Authentication 32 Encryption 67 F FCC 3 G Getting started 19 Graphics icons key 18 H Hardware connections 21 Hardware installation 21 I Icons 18 IEEE 802.1x 31, 39 Independent wireless workgroup 20 Infrastructure mode 19 Initialization vector (IV) 68 Installation 21 Interference Statement 3 A About 47 About your ZyXEL Device 19 Access point (AP) 19, 23, 29 Activating a profile 45 Adapter 45 Add new profile 43 Ad-Hoc 20, 44 Advanced Encryption Standard (AES) 32, 67 Advanced settings 45 antenna power output 51 AP. See also Access point. Authentication method open system 31 shared key 31 Authentication types 31 Available network list 35 C CA (Certificate Authority) 39, 40, 66 CCMP (Cipher block Chaining Message authentication code Protocol) 32 Certificate Authority 66 Certifications viewing 4 Channel 34, 36, 44 channel 51 Configuration current 34 Configuration method 21 configuration method Wireless Zero Configuration (WZC) 21 Connection status 34 Copyright 3 Customer Support 6 D Data encryption 36 Index 77 ZyXEL G-210H Users Guide L Link information 34 Link quality 35 Login name 39 M Message Integrity Check (MIC) 32, 67 N Network type 34 P PA2-PSK 37 Pairwise Master Key (PMK) 68 Passphrase 31 Password phrase 31 Power Saving Mode 46 product specifications 51 Profile 34 activation 45 add new 42, 43 list 42 name 42 profile delete 42 edit 42 Q Quick Start Guide 17, 21 R Radio interference 49 RADIUS server 32 Related Documentation 17 S Security data encryption 31 security 52 Security Parameters 70 Signal strength 34, 36 Site survey 35 scan 36 security settings 36 SSID 29, 34, 35 hide 30 Support CD 17 Survey 35 Syntax conventions 17 System tray 21 T Temporal Key Integrity Protocol (TKIP) 32, 67 Trademarks 3 Transfer rate 46 transmission rate 51 Transmit key 36 Troubleshooting 49 link status 49 network communication 50 starting ZyXEL Utility 49 U Uninstalling ZyXEL Utility 47 Upgrading ZyXEL Utility 48 important step 48 USB connection 19 User authentication 30, 68 V voltage 51 78 Index W Web site 17 WEP manual setup 37 passphrase 31 security 31 WEP (Wired Equivalent Privacy) 31 WEP Encryption 36 WEP key 31 automatic 31 manual 31 Wi-Fi Protected Access 32, 67 Windows XP 21 Wireless independent workgroup 20 Wireless channel 30 Wireless client 23 wireless client 29 Wireless frequency 44 Wireless LAN introduction 29 overview 29 security 30 Wireless LAN (WLAN) 29 Wireless network 29 wireless standard 51 Wireless station mode configuration 33 WLAN Security parameters 70 WPA 32, 38, 67 WPA2 32, 38, 67 WPA2-Pre-Shared Key 32, 67 WPA2-PSK 32, 67 WPA-PSK 32, 37, 67 WZC (Wireless Zero Configuration) 21 Z ZyXEL Limited Warranty Note 5 ZyXEL Utility 21 accessing 22 disable 21 download 48 help 22 icon 21 installation 21 menu 33 opening 22 Index ZyXEL G-210H Users Guide system tray icon 21 upgrade 48 version 47 79
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2007-02-08 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2007-02-08
|
||||
1 | Applicant's complete, legal business name |
ZyXEL Communications Corporation
|
||||
1 | FCC Registration Number (FRN) |
0021059092
|
||||
1 | Physical Address |
No.2, Industry East Road IX, Science Park
|
||||
1 |
Hsinchu, N/A
|
|||||
1 |
Taiwan
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
h******@atcb.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
I88
|
||||
1 | Equipment Product Code |
G210H
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
E****** B****
|
||||
1 | Title |
Section Manager
|
||||
1 | Telephone Number |
886 3******** Extension:
|
||||
1 | Fax Number |
886 3********
|
||||
1 |
E******@zyxel.com.tw
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Intertek Testing Services Taiwan Ltd.
|
||||
1 | Name |
K****** C****
|
||||
1 | Physical Address |
11 ln, Ko Tze Nan, Chia-Tung Li
|
||||
1 |
300
|
|||||
1 |
Taiwan
|
|||||
1 | Telephone Number |
886 3********
|
||||
1 | Fax Number |
86 3 ********
|
||||
1 |
K******@intertek.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 802.11b/g Wireless USB Adapter- | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power output listed is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Maximum measured SAR at zero separation distance: 0.562 W/kg | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Intertek Testing Services Taiwan Ltd.
|
||||
1 | Name |
A**** L****
|
||||
1 | Telephone Number |
886-3******** Extension:
|
||||
1 | Fax Number |
886-3********
|
||||
1 |
a******@intertek.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2412.00000000 | 2462.00000000 | 0.0237100 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC