ID 1 SKU M 3 69 69 XMSH05HM 17 Read this manual carefully before use, and retain it for future reference 02 Installing the Fitness Tracker 03 Wearing the Mi Band 04 Pairing the Mi Band with a Smartphone 05 Using the Fitness Tracker 06 Removing the Fitness Tracker 01 Product Overview 1. Insert one end of the tness tracker into the slot from the front of the wristband. 2. Press down on the other end with your thumb to push the tness tracker into the slot completely. Tighten the wristband around your wrist until there is enough slack to t about one nger, then adjust the t until you nd a comfortable position. Note: Wearing the band too loosely may impact data collection by the heart rate monitor. 1. To download the Mi Fit app, scan the QR code below or search for "Mi Fit" on the Mi App Store or Apple Store. 2. Open the Mi Fit app, log in to your account and select "Device Pairing", then follow the pairing instructions to proceed. When the Mi Band starts to vibrate and the Bluetooth pairing notication appears on the screen, press the buon to complete the pairing process. Note: Please make sure Bluetooth connection is activated on your mobile phone. During the pairing process, please keep the Mi Band near your mobile phone. Aer the Mi Band is paired successfully, it will begin to track and analyze your daily activities and sleeping habits. Press the buon to activate the display.Slide up or down on the screen to browse your activity data, measure your heart rate, and access many other features. Slide le or right on the screen to switch the display between dierent items. Remove the wristband from your wrist, hold on to each end and pull on the wristband until you see a small gap between the tness tracker and the wristband. Use your nger to pop the tness tracker out of its slot from the front side of the wristband. Touchscreen Button Heart Rate Monitor Charging Port Fitness Tracker Wristband Charging Cable Mi Fit Press the buon on the wristband to conrm pairing When the Mi Band starts to vibrate, touch the buon on the wristband to conrm pairing. 07 Charging the Mi Band 08 Important Safeguards 09 Specications Regulatory Notice Please charge your Mi Band immediately when the low power indicator is on. When using the Mi Band to measure your heart rate, please keep your wrist steady. Mi Band 3 has a water resistance rating of 5ATM. It can be worn in the shower, swimming pool, or while swimming near the shore. It cannot be used, however, while siing in a sauna or diving in the ocean. Underwater operation is not supported for the Mi Band's touch-buon and touchscreen. Aer the Mi Band has come in contact with water, please use a so cloth to wipe away excess water from its surface before using the device. Please keep the area between your wrist and the wristband dry during daily use, and clean the wristband with water regularly. Please stop using the product immediately and seek medical assistance if the contact area on your skin begins to show signs of redness or swelling. Name: Mi Band 3 Model: XMSH05HM Wight of the Fitness Tracker: 8.5 g Dimensions of the Fitness Tracker: 17.9 x 46.9 x 12 mm Wristband material: Thermoplastic elastomer Clasp material: Aluminum alloy Adjustable length: 155 - 216 mm Compatible with: Android 4.4/iOS 9.0 or later Baery capacity: 110mAh Baery type: Li-Ion polymer baery Input voltage: DC 5 V Input current: 250 mA (Max) IP rating: 5ATM Operating temperature: -10C ~ 50C Wireless connectivity: Bluetooth 4.2 BLE This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1 . This device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. FCC ID: 2AC8UXMSH05HM Any changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. ThedevicehasbeenevaluatedtomeetgeneralRFexposurerequirement.The devicecan beusedinportable exposureconditionwithoutrestriction. Please take aention that changes or modication not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Disposal and Recycling Information The symbol signies that this product has to be disposed separately from ordinary household wastes at its end of life. Please kindly be aware that this is your responsibility to dispose electronic equipment at recycling centers so as to help conserve natural resources. This device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For more regulatory information and product certication/compliance logos related to the Mi Band 3, please go to More -> About on your Mi Band 3. Manufactured for: Xiaomi Communications Co., Ltd. Manufactured by: Anhui Huami Information Technology Co., Ltd.
(a Mi Ecosystem company) Address: Room 1201, Building A4, National Animation Industry Base, No. 800 Wangjiang West Road, Gaoxin District, Hefei, Anhui, China For further information, please go to www.mi.com Mi Band 3 User Manual QR code for the Mi Fit app
(Android 4.4/iOS 9.0 or later) My Mi Band did not vibrate Note: This diagram is for reference only Slide up or down to switch between Slide left/right on the screen to different functions switch between items Wuhan__ V1.2 2018.04.11 105g XX
---
0.1mm 0.5mm PANTONG Cool Gray 11C 1:1 mm