FCC ID: 2AOKB-A2524C PowerWave Stand

EN LED Indicator Status Solid blue for 3 seconds, then off Connected to power Solid blue Flashing blue Flashing green Charging mobile device Metal objects detected Incompatible AC adapter or cable connected T Using an ultra-thick protective phone case or a case with a magnetic/iron plate is not recommended as it may affect the wireless charging function. Do not place any foreign objects between your smartphone and the wireless chargers surface, including metal pads on a car mount, credit cards, door keys, coins, metal, or NFC cards, as it may cause overheating. Do not connect the wireless charger to a 5V/1A wall charger or a USB port on a computer as it may affect the wireless charging function. Important Safety Instructions Avoid dropping. Do not disassemble. Do not expose to liquids. For the safest and fastest charge, use original or certified cables. This product is suitable for moderate climates only. The maximum ambient temperature during use of this product must not exceed 40C. Open flame sources, such as candles, must not be placed on this product. Only use a dry cloth or brush to clean this product. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not 01 Este smbolo indica que el producto no puede desecharse junto con los residuos domsticos. En su lugar, debe llevarse a un punto de recogida adecuado para el reciclaje de aparatos elctricos y electrnicos. FR Indicateur LED tat Bleu fixe pendant 3secondes, puis s'teint En tension Bleu fixe Bleu clignotant Vert clignotant Appareil mobile en charge Objets mtalliques dtects installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio / TV technician for help. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator & your body. Product Name: PowerWave Stand Model: A2524 The following importer is the responsible party. Company Name: Fantasia Trading LLC Address: 9155 Archibald Avenue, Suite 202, Rancho Cucamonga, CA, 91730, US Telephone: +1 (909) 484 1530 IC Statement This device complies with RSS-216 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference. IC RF exposure statement:

This equipment complies with IC Radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 10cm between the product and your body. Radio Standards Specification RSS-Gen, issue 5 This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. IC RF dclaration d'exposition:

Este equipo cumple con los Iimites de exposici6n a radacion por radiofrecuencia de la IC estipulados para un ambiente no controlado. Este equipo debera instalarse y utilizarse con una distancia minima de 10 cm entre el radiador y el cuerpo. Cet appareil contient des metteurs / rcepteurs exempts de licence conformes aux RSS (RSS) d'Innovation, Sciences et Dveloppement conomique Canada. Le fonctionnement est soumis aux deux conditions suivantes:

(1)Cet appareil ne doit pas causer d'interfrences. 02 La temprature ambiante maximale pendant l'utilisation de ce produit ne doit pas dpasser 40C. Ce produit ne doit pas tre expos des sources de flamme nue, notamment des bougies. Nettoyez ce produit uniquement avec un chiffon sec ou une brosse. Spcifications techniques Entre 5V 2A / 9V 2A Sortie 10W max Champ H rayonn

<37.7 dB A/m (@10m) (pour lUE et le Royaume-Uni uniquement) Gamme de frquence TX/RX Taille 110 148 KHz (pour lUE et le Royaume-Uni uniquement) 80 x 68 x 114 mm / 3.1 x 2.7 x 4.5 in

(2)Cet appareil doit accepter toutes les interfrences, y compris celles susceptibles de provoquer un fonctionnement indsirable de l'appareil. Specifications Input Output 5V 2A / 9V 2A 10W Max Radiated H-Field

<37.7 dBuA/m(@10m) (for EU / UK only) TX/RX Frequency Range Size 110-148 KHz (for EU / UK only) 80 x 68 x 114 mm / 3.1 x 2.7 x 4.5 in Weight 115 g /4.06 oz Declaration of Conformity Hereby, Anker Innovations Limited declares that this product is in compliance with Directives 2014/53/EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.anker.com To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the users body and the product. GB Declaration of Conformity Hereby, Anker Innovations Limited declares that this product is in compliance with Radio Equipment Regulations 2017 and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. The full text of the GB declaration of conformity is available at the following internet address: https://www.anker.com To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the users body and the product. Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong The following importers are the responsible parties (contract for EU and UK matters) Anker Innovations Deutschland GmbH Georg-Muche-Strasse 3, 80807 Munich, Germany Anker Technology (UK) Ltd GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom 03 Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong Les importateurs suivants sont les parties responsables (contact pour lUE et le Royaume-Uni) Anker Innovations Deutschland GmbH Georg-Muche-Strasse 3, 80807 Munich, Germany Anker Technology (UK) Ltd GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. DE LED-Anzeige Status Leuchtet 3 Sekunden lang blau, dann aus An Stromversorgung angeschlossen Leuchtet blau Gert ldt Blinkt blau Metallgegenstnde erkannt Blinkt grn Das angeschlossene WS-Netzteil oder Kabel ist inkompatibel T Von der Verwendung extrastarker Smartphone-Schutzhllen oder Schutzhllen mit Magnet- bzw. Metalleinstzen wird abgeraten, da diese die kabellose Ladefunktion beeintrchtigen knnen. Legen Sie keine Fremdkrper zwischen Ihr Smartphone und die Oberflche des kabellosen Ladegerts, einschlielich Metallunterlagen bei einer Autohalterung, Kreditkarten, Trschlssel, Mnzen, Metallgegenstnde oder NFC-Karten, da dies zu berhitzung fhren kann. Schlieen Sie das kabellose Ladegert nicht an ein 5-V-/1-A-

Wandladegert oder den USB-Anschluss eines Computers an, da dies das kabellose Laden beeintrchtigen knnte. Wichtige Sicherheitsinformationen Nicht fallenlassen. Nicht zerlegen. Keinen Flssigkeiten aussetzen. Zum sichersten und schnellsten Laden nur Original- oder zertifizierte Kabel verwenden. 04 Informazioni importanti sulla sicurezza Non fare cadere il prodotto. Non smontare il prodotto. Non esporre il prodotto a liquidi. Per effettuare la carica in modo rapido e sicuro, utilizzare i cavi originali o certificati. Il prodotto adatto all'utilizzo in climi moderati. Il prodotto deve essere utilizzato in ambienti a temperatura non superiore ai 40 C. Non collocare sorgenti di fiamme libere, ad esempio candele accese, sul prodotto. Per pulire il prodotto, utilizzare esclusivamente un panno asciutto o una spazzola. Ce symbole indique que ce produit ne doit pas tre trait comme un dchet mnager. Il doit plutt tre remis au point de collecte appropri pour le recyclage des quipements lectriques et lectroniques. Specifiche Das Produkt ist nur zur Verwendung in gemigten Klimazonen konzipiert. Die maximale Umgebungstemperatur whrend der Verwendung des Produkts darf 40 C nicht bersteigen. Offene Flammen wie z.B. Kerzen drfen nicht auf das Produkt gestellt werden. Reinigen Sie das Produkt nur mit einem trockenen Tuch oder einem Pinsel. Technische Daten Eingang 5V 2A / 9V 2A Ausgang 10 W max. ES Dieses Symbol bedeutet, dass das Produkt nicht als Hausmll entsorgt werden darf. Stattdessen ist es an der jeweiligen Sammelstelle fr das Recycling von Elektro- und Elektronikgerten abzugeben. Especificaciones ambiente mxima durante el uso de este producto no debe superar los 40C. No se deben colocar fuentes de llama desprotegidas, como velas, sobre este producto. Utilice solo un pao o cepillo seco para limpiar este producto. Abgestrahltes H-Feld

<37.7 dB A/m (@10 m) (nur EU/UK) Indicador LED Estado TX-/RX-Frequenzbereich Abmessungen 110-148 kHz (nur EU/UK) 80 x 68 x 114 mm Gewicht 115 g Konformittserklrung Anker Innovations Limited erklrt hiermit, dass dieses Produkt die Richtlinien 2014/53/EU und 2011/65/EU erfllt. Der vollstndige Text der EU-

Konformittserklrung ist unter der folgenden Internetadresse verfgbar:

https://www.anker.com/

Um die Anforderungen in Bezug auf die HF-Belastung zu erfllen, muss ein Mindestabstand von 20 cm zwischen dem Krper des Benutzers und dem Produkt eingehalten werden. Azul fijo durante 3 segundos, despus se apaga Azul fijo Parpadeo azul Parpadeo verde Conectado a la alimentacin Cargando dispositivo mvil Se han detectado objetos metlicos Se ha conectado un adaptador de CA o un cable incompatible T No se recomienda utilizar una funda de telfono protectora muy gruesa ni una funda con placas magnticas/metlicas, ya que puede afectar a la funcin de carga inalmbrica. No coloque ningn objeto extrao entre el smartphone y la superficie del cargador inalmbrico, como piezas de metal de un soporte para vehculos, tarjetas de crdito, llaves, monedas, objetos metlicos ni tarjetas NFC, ya que podra provocar un sobrecalentamiento. No conecte el cargador inalmbrico a un cargador de pared de 5 V/1 A ni un puerto USB del ordenador que pueden perjudicar la funcin carga inalmbrica. Entrada 5V 2A / 9V 2A Salida 10W mx. Campo H de radiacin

<37.7 dB A/m (a 10 m) (solo para UE y Reino Unido) Rango de frecuencias TX/RX 110-148 KHz (solo para UE y Reino Unido) Tamao 80 x 68 x 114 mm / 3.1 x 2.7 x 4.5 in Peso 115 g /4.06 oz Declaracin de conformidad Por la presente, Anker Innovations Limited declara que este producto cumple con las Directivas 2014/53/UE y 2011/65/UE. El texto completo de la declaracin de conformidad de la UE est disponible en la siguiente direccin de Internet:

https://www.anker.com/

Para dar cumplimiento al reglamento sobre exposicin a RF, se debe dejar una distancia de separacin mnima de 20 cm entre el cuerpo del usuario y el producto. Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hongkong Die folgenden Importeure sind verantwortlich (fr EU- und UK-Belange) Anker Innovations Deutschland GmbH Georg-Muche-Strasse 3, 80807 Munich, Germany Anker Technology (UK) Ltd GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom Instrucciones de seguridad importantes Evite las cadas. No desmonte el producto. No lo exponga a lquidos. Para cargar de la forma ms rpida y segura, utilice cables originales o certificados. Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong Las siguientes empresas importadoras son las partes responsables (contacto para la UE y Reino Unido) Anker Innovations Deutschland GmbH Georg-Muche-Strasse 3, 80807 Munich, Germany Anker Technology (UK) Ltd GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom 05 Este producto solo es adecuado para climas moderados.La temperatura 06 07 Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong I seguenti importatori sono la parte responsabile (contatto per le questioni pertinenti all'UE e al Regno Unito) Anker Innovations Deutschland GmbH Georg-Muche-Strasse 3, 80807 Munich, Germany Anker Technology (Regno Unito) Ltd GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom Questo simbolo indica che il presente prodotto non deve essere trattato come rifiuto domestico. Deve invece essere consegnato al punto di raccolta applicabile per il riciclaggio di apparecchiature elettriche ed elettroniche. Instrues importantes de segurana Evite deixar cair. No desmonte. No exponha a lquidos. Para carregar com rapidez e segurana, use cabos originais ou certificados para uso. Este produto adequado somente para climas moderados. A temperatura ambiente mxima durante o uso deste produto no deve exceder 40 C. Fontes abertas com chama, como velas, no devem ficar prximas a este produto. Use somente um pano seco ou um pincel para limpar o produto. Especificaes Entrada Sada 5V 2A / 9V 2A 10W max Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong Os seguintes importadores so as partes responsveis (contrato para assuntos na UE e no Reino Unido) Anker Innovations Deutschland GmbH Georg-Muche-Strasse 3, 80807 Munich, Germany Anker Technology (UK) Ltd GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom Este smbolo indica que o presente produto no deve ser tratado como resduo domstico. Deve ser entregue no ponto de recolha aplicvel para a reciclagem de equipamento eltrico e eletrnico. For FAQs and more information, please visit:

https://www.anker.com/support L'adaptateur secteur ou le cble branch est incompatible Poids 115 g /4.06 oz IT T L'utilisation d'un tui de protection ultra-pais ou avec une plaque magntique/en fer n'est pas recommande: cela risquerait d'affecter la fonction de charge sans fil. Ne placez pas de corps trangers entre votre smartphone et la surface du chargeur sans fil (plaquettes mtalliques sur support de voiture, cartes bancaires, cls, pices, objets mtalliques, cartes NFC), afin d'viter toute surchauffe. Ne branchez pas le chargeur sans fil sur un chargeur mural 5 A/1 A ou sur un port USB d'ordinateur : cela pourrait affecter la fonction de charge sans fil. Instructions importantes de scurit Ne pas faire tomber. Ne pas dmonter. Ne pas exposer des liquides. Pour obtenir la charge la plus sre et la plus rapide, utiliser des cbles d'origine ou certifis. Ce produit est adapt uniquement aux climats modrs. Dclaration d'Industrie Canada Cet appareil est conforme la norme RSS-216 d'Industrie Canada. Son utilisation est sujette aux conditions voulant que cet appareil ne cause aucune interfrence nuisible. Dclaration de conformit Par la prsente, Anker Innovations Limited dclare que ce produit est conforme aux Directives 2014/53/EU et 2011/65/EU. Le texte intgral de la dclaration de conformit pour lUE est disponible ladresse suivante :

https://www.anker.com/

Pour respecter les exigences en matire dexposition aux RF, une distance de sparation minimale de 20 cm doit tre maintenue entre le corps de lutilisateur et le produit. A2524 51005001935 V08 Indicatore LED Stato Blu fisso per 3 secondi, poi si spegne Collegato a una fonte di alimentazione Blu fisso Ricarica del dispositivo mobile Blu lampeggiante Rilevati oggetti metallici Gamma di frequenza TX/RX Dimensioni 110-148 KHz (solo per EU e UK) 80 x 68 x 114 mm Peso 115 g Azul constante por 3 segundos, em seguida, desligado Conectado energia Azul constante Carregar o dispositivo mvel Luz azul piscando Objetos metlicos foram detectados Campo H radiado Intervalo de frequncias TX/RX Tamanho 110-148 KHz (apenas para a UE e Reino Unido) 80 x 68 x 114 mm / 3.1 x 2.7 x 4.5 in

<37.7 dB A/m(@10 m)(apenas para a UE RU e Reino Unido) Verde lampeggiante Adattatore CA o cavo non compatibile connesso Dichiarazione di conformit T Si consiglia di non utilizzare custodie protettive piuttosto spesse o dotate di una piastra magnetica o in ferro poich potrebbero interferire con la funzione di ricarica wireless. Per evitare il surriscaldamento, non collocare alcun corpo estraneo, come piastre di metallo di supporti per automobili, carte di credito, chiavi, monete, oggetti metallici o schede NFC, tra lo smartphone e la superficie del caricabatterie wireless. Non collegare il caricabatterie wireless a un caricabatterie da parete da 5 V/1 A o alla porta USB di un computer poich l'operazione potrebbe alterare la funzionalit di ricarica del dispositivo. Con la presente, Anker Innovations Limited dichiara che questo prodottoA1611 conforme alle Direttive 2014/53/EU & 2011/65/EU. Il testo completo della dichiarazione di conformit UE disponibile al seguente indirizzo Internet:

https://www.anker.com/

Per soddisfare i requisiti di esposizione alle radiofrequenze, necessario mantenere una distanza minima di separazione di 20 cm tra il corpo dell'utente e il prodotto. Luz verde piscando Adaptador DC ou cabo incompatvel conectado Peso 115 g /4.06 oz T No recomendado usar uma capa ultra-grossa com placa magntica/de ferro para proteger o dispositivo, pois isso pode afetar a funo de carregamento sem fio. No coloque nenhum objeto estranho entre seu smartphone e a superfcie do carregador sem fio, incluindo as almofadas metlicas de suportes para carro, cartes de crdito, chaves, moedas, objetos de metal ou cartes NFC, isso pode causar o superaquecimento. No conecte o carregador sem fio a um carregador de parede de 5 V/1 A ou a uma entrada USB de um computador, pois isso pode afetar a funo de carregamento. Declarao de conformidade A Anker Innovations Limited declara que este produto est em conformidade com as Diretivas 2014/53/UE e 2011/65/UE. O texto completo da declarao de conformidade da UE est disponvel no seguinte endereo da Internet:

https://www.anker.com/

Para cumprir os requisitos de exposio de RF, necessria uma distncia mnima de 20 cm entre o corpo do utilizador e o produto.

( 3 ), 08 09 10 11 12 13 14 Ingresso 5V 2A / 9V 2A Uscita Max 10W PT Campo magnetico irradiato

<37.7 dB A/m(@10 m)(solo per EU e UK) Indicador de LED Status T

, , , NFC-

, . 5 /1 USB- ,

. 40 C.

, . 5V 2A / 9V 2A

. 10

<37.7

/ ( 10 ) (

Anker Innovations Limited , 2014/53/EU 2011/65/EU.

https://www.anker.com/

, 20

. Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong

Anker Innovations Deutschland GmbH Georg-Muche-Strasse 3, 80807 Munich, Germany Anker Technology (UK) Ltd GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom

. 110148 ( /

80 x 68 x 114 mm / 3.1 x 2.7 x 4.5 in 115 g /4.06 oz JP LED 3 AC T

NFC ( IC )

) 5V / 1A USB 40 5V 2A / 9V 2A 10W 80 x 68 x 114 mm 115 g 15 16 17 KO LED

3

) AC T

, , , , NFC

. . 5V/1A USB

. . 40

. C 18 5V 2A / 9V 2A 10W max H TX/RX

<37.7 dB A/m(@10m) (EU/ ) 110~148 KHz(EU/ ) 80 x 68 x 114 mm / 3.1 x 2.7 x 4.5 in 115 g /4.06 oz Anker Innovations Limited 2014/53/EU 2011/65/EU

. EU . https://www.anker.com/

RF 20cm

. T

. LED 3 AC

NFC 5V/1A USB Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong

(EU ) . Anker Innovations Deutschland GmbH Georg-Muche-Strasse 3, 80807 Munich, Germany Anker Technology (UK) Ltd GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom 40 C AR 10 ) / 37.73>

HE 5V 2A / 9V 2A Customer Service DE: Kundenservice ES: Atencin al Cliente FR: Service Client 5V 2A / 9V 2A 10W max

<37.7 dB A/m (@10m) /

/ 110-148KHz /

80 x 68 x 114 mm / 3.1 x 2.7 x 4.5 in 115 g /4.06 oz Anker Innovations Limited 2014/53/EU 2011/65/EU https://www.anker.com/

20 LED 3 AC T

NFC 5V/1A USB Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong Anker Innovations Deutschland GmbH Georg-Muche-Strasse 3, 80807 Munich, Germany Anker Technology (UK) Ltd GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom 40 C

( ) 19 20 21 22

/ ( 110-148

) 80 x 68 x 114 mm / 3.1 x 2.7 x 4.5 in 115 g /4.06 oz

. NFC USB 1/ 5

. T 2014/53/EU Anker Innovations Limited

: . 2011/65/EU

/https://www.anker.com 20 )RF(

. Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong

Anker Innovations Limited Anker Innovations Deutschland GmbH Georg-Muche-Strasse 3, 80807 Munich, Germany Anker Technology )UK( Ltd GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom

)LED(

10W max

, 3

( )' 10-( dBA 37.73>

) ( 110-148KHz TX/RX 80 x 68 x 114 mm / 3.1 x 2.7 x 4.5 in 115 g /4.06 oz IT: Servizio Clienti PT: Servio de Apoio ao Clien RU: JP:

KO:

:AR :HE

,NFC , , ,

. USB 5V/1A

. , T

. 40C

. , 26 2014/53 /EU Anker Innovations Limited

: .2011/65 /EU-

/https://www.anker.com

" 20 ,"

. Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong

Anker Innovations Deutschland GmbH Georg-Muche-Strasse 3, 80807 Munich, Germany Anker Technology )UK( Ltd GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom

, . EN: Lifetime technical support DE: Lebenslanger technischer Support ES: Asistencia tcnica de por vida FR: Support technique vie IT: Assistenza post-vendita a vita PT: Suporte tcnico ao longo da vida til do produto RU:

JP:

KO:

:AR

:HE EN: 18-month limited warranty DE: 18 Monate beschrnkte Herstellergarantie ES: Garanta limitada de 18 meses FR: Garantie de 18 mois IT: Garanzia valida 18 mesi PT: 18 meses de garantia limitada RU: 18 JP:

KO:

18 () 18 18 18 18 :AR 18 :HE

@Anker

@Anker Japan

@Anker Deutschland

@AnkerOfficial

@Anker_JP

@anker_official

@anker_jp 23 24 25 5V 2A / 9V 2A 10W max

. 27 28 29 support@anker.com support.mea@anker.com (For Middle East and Africa Only)

(US/CA) +1 (800)988 7973

(UK) +44 (0) 1604 936200

(DE) +49 (0) 69 9579 7960

(Middle East & Africa) +971 42428633

(UAE) +971 8000320817

(KSA)+966 8008500030

(Kuwait) +965 22069086

(Egypt) +20 8000000826

(AU) +61 3 8331 4800

(TR) +90 (850) 460 14 14

(RU) +8 (800) 511-86-23

+86 400 0550 036 03 4455 7823

+82 02-1670-7098 5V 2A / 9V 2A 10W max TX/RX

<37.7 dB A/m(@10m)( ) 110-148 KHz ( ) 80 x 68 x 114 mm / 3.1 x 2.7 x 4.5 in 115 g /4.06 oz Anker Innovations Limited 2014/53/EU 2011/65/

EU https://www.anker.com/

20 Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong

( ) Anker Innovations Deutschland GmbH Georg-Muche-Strasse 3, 80807 Munich, Germany Anker Technology (UK) Ltd GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom

PowerWave Stand

: A2524 FCC ID: 2AOKB-A2524C

: 5V 2A / 9V 2A Model/

Input/

Output/

: 10W Max IC: 23451-A2524C Anker Innovations Limited HVIN: A2524C Anker Innovations Limited | Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong Anker Innovations Deutschland GmbH | Georg-Muche-Strasse 3, 80807 Munich, Germany Anker Technology (UK) Limited | GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom Made in China SN: 12345678901234546 A2524 Pantone 877c Pantone cool gray 4C Pantone 877c UV 20230322 V1

-20230322ANKER logo

C5266091_X24_Ed.2 Attestation Statements TO:

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules for covered telecommunications equipment and video surveillance equipment produced by entities identified on the Commissions Covered List1, which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) that prohibit equipment authorization Applicant Company name: Anker Innovations Limited Grantee code: 2AOKB FCC ID:

Contact Name:

Address:

Telephone No:

Fax No:

Email: louis.qi@oceanwing.com

+86-13652441319

+86-13652441319 2AOKB-A2524C Louis Qi Room 1318-19, Hollywood Plaza 610 Nathan Road, Mongkok, Kowloon, Hong Kong i. ii.

[Anker Innovations Limited] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification.

[Anker Innovations Limited] (the applicant) certifies that, as of the date of the filing of the application, the applicant is not (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing covered equipment. The applicant must sign this certification. Anker Innovations Limited certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Date: 06.02.2023 Applicants Name: Louis Qi Title:

Signature 1 The Commissions Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commissions website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes covered equipment. https://www.fcc.gov/supplychain/coveredlist 1/1

C5266091_X10_Ed.2

< Anker Innovations Limited >

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2023-06-02 Subject: Request for Confidentiality FCC ID: 2AOKB-A2524C To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No No No NOTE 1 NOTE 1 No No Short-Term Confidentiality NOTE 2 No No No No No No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. 1/1 C5266091_X10_Ed.2 Sincerely, Signature:

Name: louis Qi Title: Manager 1/1

C5266091_X8_Ed.1 Letter of Authorization Company: Anker Innovations Limited Address: Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hongkong Product Name: PowerWave Stand Model Number: A2524 FCC Identifier: 2AOKB-A2524C We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: louis Qi Date: 6/2/2023 Title: Manager Signature of applicant:

1/1

US Agent for Service of Process LETTER OF ATTESTATION TO:

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process:

Company Name: Fantasia Trading LLC FRN: 0033423005 Contact Name: Louis Qi Address: 5350 Ontario Mills Pkwy, STE 100, Ontario, CA 91764 Telephone No: +1 (800)988 7973 Email: louis.qi@anker-in.com Applicant:

Company name: Anker Innovations Limited Product Description: PowerWave Stand Grantee code: 2AOKB FCC ID: 2AOKB-A2524C Contact Name: Louis Qi Address: Room 1318-19, Hollywood Plaza 610 Nathan Road, Mongkok, Kowloon, Hong Kong Telephone No: +86-13652441319 Email: louis.qi@oceanwing.com

[Anker Innovations Limited] certifies that, as of the date of this filing of the application with the TCB, [Fantasia Trading LLC] is our designated US agent for service of process for the above referenced FCC ID. [Anker Innovations Limited] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment. [Fantasia Trading LLC]

accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above reference FCC ID. The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause 2.911. The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause 2.911. Date: 06/02/2023 Applicants Name: Louis Qi Title: Manager US Agent for Service of Processs Name: Louis Qi Title: Compliance Manager Signature Signature 1/1