FCC ID: 2AOKB-A3392 Soundcore Mega, Soundcore Trance

Soundcore Soundcore Trance / Mega User Manual 1 Important Safety Instructions Please read this user manual carefully and save it for future reference. Do not place naked flame sources, such as lighted candles, on or near the product. other apparatus. Do not install near any heat sources, such as radiators,heat registers,stoves,or Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. Protect the power supply or cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the product. Only use attachments/accessories specified by the manufacturer. Unplug this product during lightning storms or when unused for long periods of time. 45C. The maximum ambient temperature during use of the product must not exceed Suitable for safe use in tropical and non-tropical areas. Only suitable for safe use in areas below 2000m above sea level. Do not make unauthorized alterations to the product; doing so may compromise safety, regulatory compliance, system performance, and may void the warranty. Refer all servicing to qualified service personnel. Servicing is required when the product has been damaged in any way. The product contains battery pack, so should not be exposed to excessive heat such as sunshine, fire or the like. 2 Whats Included 3 At a Glance 3.1 Top Panel Press and hold for 2 seconds to power on / off. Press to enter Bluetooth pairing mode. Press and hold to enter True Wireless Stereo (TWS) mode while pairing.

(Source input button) Press repeatedly to select source input. Press and hold for 2 seconds to enter Bluetooth pairing mode.

Press to skip to previous / next track.

Press to decrease / increase volume.

(Multi-function button) Press to play / pause music. Press to answer or end a call.

(Light effect button) Press to turn on / off and adjust the light mode. Press to turn on or off the BassUP mode. Press and hold for 2 seconds to switch between indoor / outdoor sound mode. 3.2 Connectors (A3392) DC IN Connect to the provided power adaptor. USB Connect to a USB storage device. Charge a USB device. AUX Connect to an external audio device through a 3.5mm aux cable (not provided). Guitar / Mic port Connect to a guitar / microphone (not provided). Guitar / Mic volume knob Rotate to adjust guitar / microphone volume. 3.3 Connectors (A3393) DC IN Connect to the provided power adaptor. USB Connect to a USB storage device. Charge a USB device. AUX Connect to an external audio device through a 3.5mm aux cable (not provided). 4 Charging 4.1 Charging your Soundcore Speaker Fully charge this speaker when using for the first time, which prolongs the lifespan of the built-in battery. Use the provided power adaptor to charge this speaker. LED behaviour (

) Battery level <10%

Battery level 25% - 50%

Battery level 50% - 75%

Battery level 75% - 100%

Fully charged 4.2 Checking Battery Level Press any button to check the remaining battery level when it is powered on. LED behaviour (

) Battery level <10%

Battery level 10% - 25%

Battery level 25% - 50%

Battery level 50% - 75%

Battery level 75% - 100%

4.3 Charging your USB Devices Use this speaker as an external battery to charge your USB devices. Connect your USB device to the USB port on the rear of this speaker. 5 Powering On / Off Connect the provided power adaptor to the to an AC mains outlet. Press and hold for 2 seconds to power on or off. DC IN power jack of this speaker, and then Built-in battery can be used as power supply of this speaker. Unplug the power adaptor from the AC mains outlet when not in use for an extended period of time. If this speaker is powered by built-in battery, it will power off automatically after 30 minutes of button inactivity or no audio playback. If this speaker is connected to AC power and the built-in battery is fully charged, it will power off automatically after 30 minutes of button inactivity or no audio playback. Using your Soundcore 6 6.1 Bluetooth Mode With this speaker, you can enjoy music through your Bluetooth-enabled devices. Bluetooth pairing Bluetooth connected LED behaviour (

) Flashing blue Steady blue Dual Bluetooth Connection:

This speaker can pair up to two mobile devices via Bluetooth. This speaker can only play music on one mobile device at the same time. To pair with another Bluetooth device, press to re-enter Bluetooth pairing mode. To play from another connected device, pause the currently active device first. Each time you power on your Soundcore speaker, it will automatically connect to your last connected device if available within the Bluetooth range. If not, press to enter Bluetooth pairing mode. You may also control music in the Soundcore App. 6.2 True Wireless Stereo (TWS) Mode With True Wireless Stereo technology, you can pair your with another right sound channels separated on both speakers. Soundcore Trance / Mega Soundcore Trance / Mega to explore the best sound effects with left and Press and hold enter TWS mode. on both Soundcore Trance / Mega speakers simultaneously to LED behaviour (

) Flashing white twice Steady white for 5 seconds then fade out TWS connecting TWS connected With TWS connected, volume can be controlled at the same time for the two With TWS connected, both speakers can be paired with different smartphones. speakers. 6.3 USB / Aux Playback Plug in a 3.5mm audio cable or insert a USB drive, then press AUX in mode and USB mode. to switch between LED behaviour (

) Steady green Steady white AUX in mode USB mode SoundLine AUX cable sold separately. When using AUX mode, control audio playback via the connected device. 6.4 Button controls Press Press Press

Press Play / Pause Next track Previous track Volume down / up Turn BassUp on / off Press and hold for 2 seconds Switch between Indoor / Outdoor sound modes 6.5 Microphone / Guitar Connection (Only available for A3392) 1. Connect your microphone / guitar (not provided) to the rear of this product. 2. Rotate the microphone / guitar volume knob to adjust the microphone / guitar volume. MIC / GUITAR port on the 6.6 Beat-Driven Light Show to turn on / off or adjust the light show effects. Check all available light modes in the Soundcore App. Press 7 Soundcore App Download the Soundcore app for an enhanced product experience. Set up Bluetooth connection Update firmware Indicate battery status Switch among multiple light modes ( Default light scenario is Party) Switch between indoor and outdoor sound modes Light DJ mode to support light and sound variation Enjoy party games Switch BassUP mode Remotely control the volume and play / pause 8 Specifications Specifications are subject to change without notice. 100 ~ 240 V, 50~60Hz 15 V 3 A 10,000 mAh 5 V 2.4 A (Max) 80 W 4.5 hours IPX7 18 hours Playtime (varies by volume level and music content) Bluetooth version V5.0 Bluetooth frequency 2402 - 2480 MHz Bluetooth maximum transmitter power 8 dBm A2DP 1.2, AVRCP 1.5, HFP 1.7 20 m / 66 ft AC power input DC power input Battery capacity USB output Output power Charging time Waterproof level Bluetooth profile Bluetooth range Notice This product complies with the radio interference requirements of the European Community. This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Follow local rules and never dispose of the product and rechargeable batteries with normal household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environment and human health. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator & your body. Company Name: Fantasia Trading LLC Address: 9155 Archibald Avenue, Suite 202, Rancho Cucamonga, CA, 91730, US Telephone: +1 (909) 484 1530 IC NOTICE TO CANADIAN USERS IC NOTICE TO CANADIAN USERS This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) L' appareil ne doit pas produire de brouillage;

(2) L' appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. CAN ICES-3B/ NMB-3B This equipment complies with IC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. ce matriel est conforme aux limites dexposition aux rayonnements rf de ic noncs dans un autre environnement. ce matriel doit tre install et exploit une distance minimale de 20 cm entre le radiateur et votre corps. Declaration of Conformity Hereby, Anker Innovations Limited declares that the radio equipment type A3392 /

A3393 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:

https://www.anker.com/products Maximum output power: 2.0 dBm Frequency band: 2.4G band (2.4000GHz-2.4835GHz) Trademark Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Anker Innovations Limited. is under license. Other trademarks and trade names are those of their respective owners. Customer Service

* Additional Legal Rights for Consumers For consumers, who are covered by consumer protection laws or regulations in their country of purchase or, if different, their country of residence, the benefits conferred by Soundcore's Limited Warranty are in addition to all rights and remedies conveyed by such consumer protection laws and regulations, including but not limited to these additional rights. For FAQs and more information, please visit Model: A3392 / A3393 https://www.soundcore.com/

, PN ee sounocore Mega Model: A3392 FCC ID: 2AOKB-A3392 Input: DC 15Ve=3A USB Output: DC 5V==2.4A(Max) ANKER TECHNOLOGY (UK) LTD Suite 8, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesiredoperation. Made in China

Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hongkong Anker Innovations Limited Long/Short-term Confidentiality Request Date: Oct. 18, 2019 2AOKB-A3392 Federal Communications Commission 445 12th Street SW Washington, DC 20554 FCC ID:

To Whom it may concerns, Pursuant to sections 0.457(d) and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, we hereby requests long-term confidential treatment of information accompanying this application as outlined below:

Schematics Block Diagram Operational Description Parts List Tune-Up Info In addition we hereby request the following exhibits contained in this application to be temporarily (short-term confidentilality) withheld from the public disclosure for an initial period of 180 days until:

not applicable External Photos Internal Photos Test Setup Photos Users Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to rule 0.457(d), disclosure of this application and all accompanying documentation will not be made before the date of the GRANT for this application. If you have any questions, please feel free to contact me. Yours sincerely, Signatory Contact person: Louis Qi Title: General Manager

Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hongkong Limited Agency Agreement Anker Innovations Limited FCC ID: 2AOKB-A3392

[Oct. 28, 2019]

Federal Communications Commission 445 12th Street SW Washington, DC 20554 Subject:

To Whom It May Concern:

We, Anker Innovations Limited hereby authorized Intertek Testing Services to act as our Agent for the purpose of preparing application for FCC ID number (2AOKB-A3392) under all applicable parts of the FCC rules and regulations. The effective date of this limited agency agreement is (2019-10-28). The Limited Agency Agreement expires until further notice, unless sooner terminated or extended by written notice to Intertek Testing Services and the Federal Communications Commission. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. The applicant is not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 U.S.C. 862, and no party to the application is subject to a denial of federal benefits pursuant to that section. If you have any questions or comments, please do not hesitate to contact me. Sincerely,

[Signature]

[Louis Qi]

[General Manager]