FCC ID: 2AOKB-A25A7 Wireless Charger

For FAQs and more information, please visit:

anker.com/support

@anker_official

@anker_jp

@Anker Deutschland

@Anker Japan

@Anker

@AnkerOfficial

@Anker_JP Product Number: A25A7 51005003018 V01 English etina Dansk Deutsch Espaol Suomi Franais Magyar Italiano Nederlands Norsk Jzyk polski 01 07 11 15 19 23 27 31 35 39 43 47 51 Portugus P Slovensk Jazyk Slovenski Jezik Svenska Trk 55 59 63 67 71 75 79 83 87 91 95 100 Using the Battery and the Base Wireless Charging Indicator on the Base Wireless Charging Indicator on the Battery Battery Level Indicator Status Battery Level Indicator Using the Battery Only Wireless Charging Indicator on the Battery EN Status Connected to power Solid white for 3 seconds, then off Battery placed on

Charging your phone after placing the battery on Lighting up one by one, then off Solid blue Charging your earbuds

Metal objects detected Flashing blue quickly Flashing white quickly Overvoltage or undervoltage protection Incompatible AC adapter connected, indicating that you need to switch to a Quick Charge 2.0/3.0 or Power Delivery adapter Only LED lights on the two sides flash white Off Lighting up one by one and then showing the current battery level Showing the current battery level, with the highest power indicator flashing Solid blue, then off after 10 minutes Solid blue, then off after 10 minutes Solid blue Showing the current battery level Solid blue Showing the current battery level, with the highest power indicator flashing Flashing blue quickly Showing the current battery level Off Off Showing the current battery level, with the highest power indicator flashing Showing the current battery level, with the highest power indicator flashing Showing the current battery level, with the highest power indicator flashing

Off Activated Being charged Fully charged

Wirelessly charging the iPhone 12 series or later Wirelessly charging the iPhone 12 series or later while being recharged Metal objects detected Overvoltage or undervoltage protection Incompatible AC adapter connected, indicating that you need to switch to a Quick Charge 2.0/3.0 or Power Delivery adapter Charging using a cable Off Showing the current battery level 01 02 This wireless charger is not compatible with non-MagSafe phone cases, such as protection against harmful interference in a residential installation. T Otterbox Defender cases. Connect the wireless charger to a Quick Charge 2.0/3.0 or Power Delivery wall adapter. Do not connect to a 5V/1A wall charger or a USB port on a computer as it may affect the wireless charging function. Do not place any foreign objects between your device and the wireless chargers surface, including metal pads on a car mount, magnetic cards, door keys, coins, NFC cards or other metal objects, as they could potentially demagnetize the wireless charger, affect the charging speed, or cause overheating. Wireless chargers make charging more convenient than wired chargers, but confined by current wireless technology, their charging speed is slower than that of wired chargers. Important Safety Instructions Please refer to the electrical and safety information on the bottom before installing or operating the product. Avoid dropping. Do not disassemble. Do not expose to liquids. This product is suitable for moderate climates only. The maximum ambient temperature during use of this product must not exceed 40C. Open flame sources, such as candles, must not be placed on this product. Only use a dry cloth or brush to clean this product. For the included portable charger:

To reduce the risk of injury, close supervision is necessary when the product is used near children. Do not put fingers or hands into the product. Do not expose to rain or snow. Do not use in excess of its output rating. Overload outputs above rating may result in a risk of fire or injury to persons. Do not use if damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury. Do not disassemble the portable charger. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury to persons. Do not expose to fire or excessive temperature. Exposure to fire or temperatures above 100C may cause explosion. Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained. Switch off the portable charger when not in use. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio / TV technician for help. Radiation Exposure Statement Base: This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Power Bank: This equipment complies with radiation exposure limits set forth for an uncontrolled environment. Model: A25A7 The following importer is the responsible party (for FCC matters only). Company Name: Fantasia Trading LLC Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone: +1 800 988 7973 IC Statement This device complies with RSS-216 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference. RSS-Gen Issue 5 March 2019 This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable 03 RF exposure statement:

Base: This equipment should be installed and operated with minimum distance 10cm between the radiator and your body. Power Bank: This equipment complies with radiation exposure limits set forth for an uncontrolled environment. This device complies with Industry Canada license-ICES-003. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. This digital apparatus complies with CAN ICES-003(B)/NMB-003(B). 04 Canada applicables aux appareils radio exempts de licence. L'exploitation est Le prsent appareil est conforme aux CNR d' Innovation, Sciences et Dveloppement conomique autorise aux deuxconditions suivantes :

(1) l'appareil nedoit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. This product complies with the radio interference requirements of the European Community. Specifications Cell Capacity Portable Charger Declaration of Conformity Hereby, Anker Innovations Limited declares that the product type A25A7 is in compliance with Directives 2014/53/EU & 2014/30/EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address:

Charging Base https://www.anker.com/

This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. Wall Charger 5,000mAh 2.4A / 9V 2.33A Input:

USB-C: 5V Pogo Pin: 9V Output:

USB-C: 12W Max Wireless: 5W / 7.5W 2.33A 2.8A Input:

USB-C: 9V Output:

Wireless earbuds: 5W Max Pogo Pin: 21W Max Input:

100-240V 1A 50/60Hz Output:

5V 3A / 9V PPS 3.3-5.9V 2.8A 3A / 3.3-11V 2.25A Anker Innovations Limited Room 1324-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong Anker Innovations Deutschland GmbH Georg-Muche-Strasse 3, 80807 Munich, Germany Anker Technology (UK) Ltd Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom GB Declaration of Conformity Hereby, Anker Innovations Limited declares that the product type A25A7 is in compliance with Electromagnetic Compatibility Regulations 2016, Radio Equipment Regulations 2017 and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 Electrical Equipment (Safety) Regulations 2016 & The Ecodesign for Energy-

Related Products Regulations 2010.. The full text of the GB declaration of conformity is availableat the following internet address:

https://www.anker.com This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 20mm must be maintained between the users body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. This device is in compliance with the essential requirements and other relevant provisions of UKCA. All essential radio test suites have been carried out. This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the users body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. This device in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out 1. The device complies with RF specifications when the device used at 20cm form your body 05 06

C5266091_X10_Ed.2 Anker Innovations Limited Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 11/1/2021 Subject: Request for Confidentiality FCC ID: 2AOKB-A25A7 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No No No NOTE 1 NOTE 1 No No Short-Term Confidentiality NOTE 2 No No No No No No NOTE1:LongTermConfidentialitymaybepermittedunderspecialconditions(SeeII.LONGTERMCONFIDENTIALITY,Section3of KDB726920,uselastinforce) NOTE2:ShortTermConfidentialitycanberequestedforamaximumof180daysfromthedateofthegrant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: louis Qi Title: Manager 1/1

C5266091_X8_Ed.1 Letter of Authorization Anker Innovations Limited Company: Anker Innovations Limited Address: Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hongkong Product Name: Wireless Charger Model Number: A25A7 FCC Identifier: 2AOKB-A25A7 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: louis Qi Date: 11/1/2021 Title: Manager Signature of applicant:

1/1