FCC ID: K7SF7D2401V1 Belkin Modem Router

23531_8820-00390_F7D2401 v1_Surf Modem Router_0205 change SURF WIRELESS MODEM-ROUTER USER MANUAL F7D2401 v1 TABLE OF CONTENTS Getting Started Whats in the Box Initial Setup Advanced Tools & Settings The Belkin Router Manager Manual Setup Using Your Browser Adding Computers to Your Network Getting to Know Your Router Front Panel Back Panel Technical Details Technical Features System Requirements Troubleshooting, Support, and Warranty Troubleshooting Technical Support Belkin International, Inc., Limited 2-Year Product Warranty Regulatory Information FCC Statement 23531_8820-00390_F7D2401 v1_Surf Modem Router_0205 change Getting Started Whats in the Box Surf Wireless Modem-Router ADSL cable (attached to router) In some regions, a phone-jack adapter (microfilter) will be included. Power supply (attached to router) Network information card (attached to router) Belkin Setup CD with User Manual Initial Setup Where to Place Your Router For the best results, place the Router in an open location away from large metal objects and magnets such as those found in speakers. Raising the Router above floor level can improve the strength of your wireless signal. How to Set It Up

[MR BASIC/SURF SETUP DIAGRAM mr basicsurf setup.ai]

1) Connect your Routers ADSL cable to your phone jack or phone-jack adapter (microfilter). If you are replacing an existing Router or gateway, this may require unplugging the existing gateway. Note: If required by your Internet Service Provider (ISP), plug the included phone-jack adapter (microfilter) into your wall-mounted phone jack. Please check with your provider before connecting your Router if you are unsure whether or not you need to use the included phone-jack adapter. 2) Plug the Routers power supply into a wall outlet. 23531_8820-00390_F7D2401 v1_Surf Modem Router_0205 change 3) Put the CD into your computer. If the CD doesnt open automatically, please browse to your CD drive and double-

click on the Belkin Setup CD icon.

[SCREENSHOT OF SETUP MENU setup menu.png]

4) Click the Setup icon on the CD menu.

[SCREENSHOT OF NETWORK INFO CARD SCREEN setup netinfo card.png]

5) After a brief installation, the setup software will ask you for the network name and password from the network information card that is attached to your Router. Store the card under the base of your Router for future reference.

[SCREENSHOT OF SUCCESS setup success.png]

6) A progress screen will appear while additional software is installed. This may take a few minutes to complete. Once finished, a Success message will appear indicating that you are connected to the Internet via your new Belkin Router. During setup you may be asked for additional information. You may need to enter a username and password provided by your ISP. This username and password is likely to be found on materials that came from your ISP when you signed up for service. If necessary, you may need to contact your ISP to retrieve your username and password. If you have a static IP address, you may need to enter additional information also provided by your ISP. If your computer doesnt have a wireless adapter, or the setup software is unable to control it, you may be asked to connect your computer to the Router with a network cable. 23531_8820-00390_F7D2401 v1_Surf Modem Router_0205 change If the setup software is unable to detect your VCI and VPI settings based on your country, you may also need to enter this information. Your ISP is likely to have provided it. Advanced Tools & Settings

[SCREENSHOT OF ADVANCED MENU setup advanced2.png]

After the initial setup is complete, you have the option to change settings like your network name, security type, and password. To make these changes and others, click on the Advanced Tools icon at the CD Setup menu and select one of the following settings that you would like to change:

Network Name & Security Personalize your network name (SSID), password, and strength of wireless security. Internet Service Provider & Login Settings Have you moved or changed Internet Service Providers? If youd like to change these settings without running through the setup process again, this is the place. The Belkin Router Manager

[BASIC/ SCREENSHOT OF TRAY APP MENU (TBD)]

The Belkin Router Manager appears in your system tray (Windows) or menu bar (Mac). Its icon indicates the current status of your Router and also allows you to access your Routers settings to make changes. It also provides quick access to software that came bundled with your Router. To access the Router settings, click on the icon and select from the menu that appears. The status of your Router is shown by the Belkin Router Manager icon, which closely mimics the light on the front of the Router. Green: You are connected to your Belkin Router and it is connected to the Internet. Amber: You are connected to your Belkin Router, but it is not connected to the Internet. 23531_8820-00390_F7D2401 v1_Surf Modem Router_0205 change Manual Setup Using Your Browser

[ZOOMED SCREENSHOT OF ADDRESS BAR address bar.png]

In your browser, type http://router (you do not need to type in anything else such as www). Then press the Enter key. If youre still having trouble running the manual setup option, type 192.168.2.1 in your browser (you do not need to type in anything else such as http:// or www). Then press the Enter key. Adding Computers to Your Network Wireless devices such as computers, network printers, and gaming systems can connect to your Router with a few simple steps. Using the CD 1) Put the Setup CD into your computer. If the CD doesnt open automatically, browse to your CD drive and open the Belkin Setup CD icon. 2) Click the Setup icon on the CD menu. 3) After a brief installation, the setup software will ask you for the network name and password from the network information card that came with your Router. This card is most likely now located underneath the foot of your Router in the provided card slot. 4) A progress screen will appear while additional software is installed. This may take a few minutes to complete. Once finished, a Success message will appear indicating that you are connected to the Internet via your new Belkin Router. Note: The setup software runs only on Windows and Mac OS X systems. Manually 23531_8820-00390_F7D2401 v1_Surf Modem Router_0205 change If you choose not to use the included Setup CD for adding additional computers or wireless devices, you can manually add these items to your network. 1) Locate the wireless-network-connections option on your computer or wireless device. 2) Select your Belkin Router from the list of available networks. You can identify your Belkin Router by locating the network name (SSID) from the card located underneath the foot of your Router. 3) Enter your network password (located on your network information card). Your wireless device will take a few moments to connect to your network. If the connection is not made the first time, try this process again. If you still have difficulty connecting to your network after trying this process a few times, see the Troubleshooting section in this manual for help with connecting to your network. Note: In some cases you may be prompted to select the security type. It is printed on the card for your convenience. Using the WPS Button 1) Start WPS Push Button Connection (WPS PBC) on your computer or other Wi-Fi device that you would like to connect wirelessly to your Router. Often there will be a button for this purpose in software that came with the device, or a physical WPS, PBC, or Security button on the device itself. 2) Within two minutes, press the WPS button on your Router. The WPS light (small light above WPS button) will blink green while it listens for your Wi-Fi device. Once a connection is 23531_8820-00390_F7D2401 v1_Surf Modem Router_0205 change established, the light will turn green and then go out. If a connection is not established, the light will blink amber. You may repeat the process to try again. You can repeat this process for each WPS-enabled device youd like to add to your network. Getting to Know Your Router Front Panel

[DIAGRAM front.ai]

A) Router Status Light Your Routers status is shown by the light on the front. Off: The Router is not plugged into a power source. Blinking Green: The Router is starting up. Solid Green: The Router is connected to the Internet. Blinking Amber: Either the RJ11 cable is not plugged in, or there is no signal. B) Wi-Fi Protected Setup (WPS) Light and Button The WPS button on the front of your Router can be used to help establish a secure connection between your Router and other WPS-

enabled Wi-Fi devices such as computers. To use the WPS feature on your Router, see Getting Started > Adding Computers to Your Network > Using the WPS Button. The small light near the WPS button shows what is happening while you are using WPS to establish a connection. Off: Idle 23531_8820-00390_F7D2401 v1_Surf Modem Router_0205 change Blinking Green: The Router is listening for a WPS-enabled computer or other device. Solid Green: The Router has made a secure connection with the computer or other device. Amber: A connection was not created. Back Panel

[MR DIAGRAM FOR BASIC AND SURF mr_basicsurf_back.ai]

A) ADSL Connector Connect your Router to a phone jack using a telephone cord. In some areas, a microfilter might be required. B) Wired (LAN) Connectors Connect computers and other wired network devices to these ports using Ethernet cables. C) Reset Button This button is used to restart your Router in rare cases when it functions incorrectly. Resetting the Router will preserve your settings. This button may also be used to restore the factory default settings. Please see the Troubleshooting section for more information. D) Power Connector Connect the included power supply to this jack. Technical Details Technical Features Integrated ADSL2+ Modem The integrated ADSL2+ modem allows you to connect to the Internet via your local Internet Service Provider (ISP) without installing and maintaining a separate DSL modem. Integrated 802.11n Wireless Access Point 23531_8820-00390_F7D2401 v1_Surf Modem Router_0205 change Utilizing MIMO (Multiple Input Multiple Output) smart-antenna technology, your Router can reach data transfer speeds of up to 300Mbps across your network. NAT IP Address Sharing To save you the cost of adding IP addresses per computer in your house, your Belkin Router uses Network Address Translation (NAT) technology, allowing you to share a single IP address across your network. SPI Firewall Your Router is equipped with a firewall that will protect your network from a wide array of common attacks and viruses. Universal Plug-and-Play (UPnP) Compatibility The UPnP (Universal Plug-and-Play) feature in your Router offers seamless operation of voice and video messaging, games, and other applications that are UPnP-compliant. Web-Based Advanced User Interface You can easily make changes to your Routers advanced settings through your web browser. These changes can be made from any computer on your network. Belkin Router Monitor The Belkin Router Monitor application helps you to monitor your Routers status and change network settings. Integrated 4-Port 10/100 Switch Your Router has a built-in, 4-port network switch to allow your wired computers to share: printers, data, MP3 files, digital photos, and much more. System Requirements Modem Router Broadband ADSL Internet connection with RJ11 (telephone) connection At least one computer with an installed network interface adapter TCP/IP networking protocol installed on each computer RJ11 ADSL telephone cable Internet browser Setup Software A computer running Windows XP SP2 or higher, Windows Vista, or Windows 7; or Mac OS X v10.x Minimum 1GHz processor and 256MB RAM 600MB of free hard-drive space for installation 23531_8820-00390_F7D2401 v1_Surf Modem Router_0205 change Troubleshooting, Support, and Warranty Troubleshooting The Setup CD does not automatically start. If Belkin Setup does not run when you insert the CD-ROM, your computer may not be configured to open CDs automatically. If Belkin Setup does not appear within 15 seconds, browse to your CD-ROM drive and open the Belkin Setup icon. Alternatively, you may visit http://router/ and perform the setup manually. Please see Manual Setup Using Your Browser earlier in this manual for more information. Belkin Setup cannot find my Router. If Belkin Setup is not able to communicate with your Router during the installation process, please check the following items. 1) Make sure that the wireless hardware on your computer is turned on, if available. 2) Try connecting your computer to one of the four wired ports on the Router with an Ethernet cable. 3) Ensure that the Router is on. The front-panel light should be on. 4) Unplug the Routers power supply for 10 seconds, then plug it back in. 5) There may be firewall software on your computer preventing an outgoing connection. You may choose to temporarily disable this software before attempting setup. If Belkin Setup still cannot find the Router, you might choose to do a manual setup. Refer to Manually Configuring Network Settings in this manual for details. Belkin Setup cannot connect my Router to the Internet. 23531_8820-00390_F7D2401 v1_Surf Modem Router_0205 change If Belkin Setup is not able to connect the Router to the Internet, please check the following items:

1) Use the troubleshooting suggestions within Belkin Setup. 2) If your ISP requires a user name and password, make sure that you have typed in your user name and password correctly. Some user names require that the ISPs domain may be at the end of the name. Example: myname@myisp.com. The

@myisp.com part of the user name may need to be typed as well as your user name. 3) If you continue to have no Internet connection, refer to Manually Configuring Network Settings in this manual for an alternative setup method. Belkin Setup completed installation, but I cannot browse the Web. The light on the front of my Router is blinking amber. 1) Make sure the Router is connected to your ADSL line with an RJ11 (telephone) cable via the Routers one gray ADSL port. 2) Check that the modem (ADSL) connection is connected to your broadband (ADSL) socket on the wall (via an ADSL filter if one is required). 3) Unplug your Routers power supply, wait 10 seconds, and plug it back in. This will cause the Router to try to reestablish communication with the ADSL line. I cant connect to the Internet wirelessly. If the light on the front of the Router is solid green, then your Router is connected to the Internet. You may not be connected to the Routers wireless network. Please refer to Adding Computers to Your Network in this manual for instructions. I cant connect to the Internet wirelessly and my network name is not listed in Available Networks. 23531_8820-00390_F7D2401 v1_Surf Modem Router_0205 change 1) Verify that your Router is on and the front-panel light shows solid green. 2) If you are far from the Router, you might try moving closer to see if you might have been out of range. 3) Using a computer attached to the Router via a network cable, visit http://router/ and ensure that Broadcast SSID is ON. This setting is found on the Channel and SSID page. My wireless network performance is slow, inconsistent, suffers from weak signal, or Im having difficulty maintaining a VPN connection. Wireless technology is radio-based, which means connectivity and the throughput performance between devices decreases when the distance between devices increases. Other factors that will cause signal degradation (metal is generally the worst culprit) are obstructions such as walls and metal appliances. Note also that connection speed may decrease as you move farther away from the Router. In order to determine if wireless issues are related to range, we suggest temporarily moving the computer within 10 feet from the Router if possible. Changing the wireless channelDepending on local wireless traffic and interference, switching the wireless channel of your network can improve performance and reliability. See the section titled Changing the Wireless Channel for instructions on how to choose other channels. Limiting the wireless transmit rateLimiting the wireless transmit rate can help improve range and connection stability. Most wireless cards have the ability to limit the transmission rate. To change this property in Windows, go to the Windows Control Panel, open Network Connections, and double-click on your wireless cards connection. In the properties dialog, select the Configure button on the General tab, then choose the Advanced tab and select the rate property. 23531_8820-00390_F7D2401 v1_Surf Modem Router_0205 change Wireless client cards are usually set to automatically adjust the wireless transmit rate for you, but doing so can cause periodic disconnects when the wireless signal is too weak; as a rule, slower transmission rates are more stable. Experiment with different connection rates until you find the best one for your environment. Note that all available transmission rates should be acceptable for browsing the Internet. For more assistance, see your wireless cards user manual. Ive installed this new Router and some of my network clients

(computers, game consoles, etc.) are now unable to connect. Your new Router came pre-configured with a network name and password, found printed on an attached card. All clients must use this network name and password to connect wirelessly to your Router. You will need to find the network settings on your client, select the network name printed on the card from the list of available networks, and enter the password when prompted to join the wireless network. Does the Router support Wireless Protected Access (WPA) security?

The Router ships with WPA/WPA2 security turned on. Windows XP and some older network hardware may require a software update to support WPA/WPA2. I am having difficulty setting up WPA security on my Router. 1) Log in to your Router by visiting http://router/ with your web browser. Click on the Login button in the top right-hand corner of the screen. You will be asked to enter your password. If you have never set a password, leave the Password field blank and click Submit. 2) Click Wireless in the left-hand menu. Then click Security just below that. 3) Select the WPA/WPA2 option. 23531_8820-00390_F7D2401 v1_Surf Modem Router_0205 change 4) Enter a password. This can be from 863 characters of your choice, including spaces and punctuation, OR a 64-digit hexadecimal number (using only the numbers 09 and letters AF). 5) Click Apply Changes to finish. Your wireless connection is now encrypted. Each computer using your wireless network will need to use the new key. Note: If you are configuring the Router over a wireless connection, you will have to re-connect to the Router after changing any security settings. Note: Some older networking hardware supports only WEP encryption. If your older computers cannot connect to your network, try 128-bit or 64-bit WEP, or seek software updates from their manufacturers. I am having difficulty setting up Wired Equivalent Privacy (WEP) security on my Router. 1) Log in to your Router. Visit http://router/ with your web browser. Click on the Login button in the top right-hand corner of the screen. You will be asked to enter your password. If you have never set a password, leave the Password field blank and click Submit. 2) Click Wireless in the left-hand menu. Then click Security just below that. 3) Select the 128-bit WEP option. 4) You may type in a WEP key manually, or generate one from a passphrase. Type a phrase in the Passphrase field and click the Generate button. A WEP key is composed of 26 hexadecimal digits (09, AF). For example, C3 03 0F AF 4B B2 C3 D4 4B C3 D4 EE 74 is a valid 128-bit WEP key. 23531_8820-00390_F7D2401 v1_Surf Modem Router_0205 change 5) Click Apply Changes to finish. Your wireless activity is now encrypted. Each computer using your wireless network will need to use the new key. Note: If you are configuring the Router over a wireless connection, you will have to re-connect to the Router after changing any security settings. Note: Some older networking hardware supports only 64-bit WEP encryption. If your older computers cannot connect to your network, try 64-bit WEP. Technical Support US http://www.belkin.com/support UK http://www.belkin.com/uk/support Australia http://www.belkin.com/au/support New Zealand http://www.belkin.com/au/support Singapore 65 62218850 Europe http://www.belkin.com/uk/support Belkin International, Inc., Limited 2-Year Product Warranty What this warranty covers. 23531_8820-00390_F7D2401 v1_Surf Modem Router_0205 change Belkin International, Inc. (Belkin) warrants to the original purchaser of this Belkin product that the product shall be free of defects in design, assembly, material, or workmanship. What the period of coverage is. Belkin warrants the Belkin product for two years. What will we do to correct problems?

Product Warranty. Belkin will repair or replace, at its option, any defective product free of charge

(except for shipping charges for the product). Belkin reserves the right to discontinue any of its products without notice, and disclaims any limited warranty to repair or replace any such discontinued products. In the event that Belkin is unable to repair or replace the product (for example, because it has been discontinued), Belkin will offer either a refund or a credit toward the purchase of another product from Belkin.com in an amount equal to the purchase price of the product as evidenced on the original purchase receipt as discounted by its natural use. What is not covered by this warranty?

All above warranties are null and void if the Belkin product is not provided to Belkin for inspection upon Belkins request at the sole expense of the purchaser, or if Belkin determines that the Belkin product has been improperly installed, altered in any way, or tampered with. The Belkin Product Warranty does not protect against acts of God such as flood, lightning, earthquake, war, vandalism, theft, normal-use wear and tear, erosion, depletion, obsolescence, abuse, damage due to low voltage disturbances (i.e. brownouts or sags), non-authorized program, or system equipment modification or alteration. How to get service. To get service for your Belkin product you must take the following steps:

1. Contact Belkin International, Inc., at 12045 Waterfront Drive, Los Angeles, CA 90094, Attn: Customer Service, or call (800)-223-5546, within 15 days of the Occurrence. Be prepared to provide the following information:

a. The part number of the Belkin product. b. Where you purchased the product. c. When you purchased the product. d. Copy of original receipt. 2. Your Belkin Customer Service Representative will then instruct you on how to forward your receipt and Belkin product and how to proceed with your claim. Belkin reserves the right to review the damaged Belkin product. All costs of shipping the Belkin product to Belkin for inspection shall be borne solely by the purchaser. If Belkin determines, in its sole discretion, that it is impractical to ship 23531_8820-00390_F7D2401 v1_Surf Modem Router_0205 change the damaged equipment to Belkin, Belkin may designate, in its sole discretion, an equipment repair facility to inspect and estimate the cost to repair such equipment. The cost, if any, of shipping the equipment to and from such repair facility and of such estimate shall be borne solely by the purchaser. Damaged equipment must remain available for inspection until the claim is finalized. Whenever claims are settled, Belkin reserves the right to be subrogated under any existing insurance policies the purchaser may have. How state law relates to the warranty. THIS WARRANTY CONTAINS THE SOLE WARRANTY OF BELKIN. THERE ARE NO OTHER WARRANTIES, EXPRESSED OR, EXCEPT AS REQUIRED BY LAW, IMPLIED, INCLUDING THE IMPLIED WARRANTY OR CONDITION OF QUALITY, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND SUCH IMPLIED WARRANTIES, IF ANY, ARE LIMITED IN DURATION TO THE TERM OF THIS WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. IN NO EVENT SHALL BELKIN BE LIABLE FOR INCIDENTAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES SUCH AS, BUT NOT LIMITED TO, LOST BUSINESS OR PROFITS ARISING OUT OF THE SALE OR USE OF ANY BELKIN PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. This warranty gives you specific legal rights, and you may also have other rights, which may vary from state to state. Some states do not allow the exclusion or limitation of incidental, consequential, or other damages, so the above limitations may not apply to you. 23531_8820-00390_F7D2401 v1_Surf Modem Router_0205 change

*Regulatory Information FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin International, Inc., of 12045 Waterfront Drive, Los Angeles, CA 90094, declare under our sole responsibility that the device, F7D2401 v1, complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 23531_8820-00390_F7D2401 v1_Surf Modem Router_0205 change Caution: Exposure to Radio Frequency Radiation. The device shall be used in such a manner that the potential for human contact normal operation is minimized. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Connect the equipment to an outlet on a circuit different from that to which the Increase the distance between the equipment and the receiver. receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. Canada-Industry Canada (IC) The wireless radio of this device complies with RSS 210 Industry Canada. This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. IMPORTANT NOTE:

23531_8820-00390_F7D2401 v1_Surf Modem Router_0205 change IC Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. FCC PART 68 STATEMENT. This equipment complies with Part 68 of FCC Rules. On the base unit of this equipment is a label that contains, among other information, the FCC Registration Number and Ringer Equivalence Number (REN) for this equipment. IF REQUESTED, THIS INFORMATION MUST BE GIVEN TO THE TELEPHONE COMPANY. The REN is useful to determine the quantity of devices you may connect to your telephone line and still have all of those devices ring when your telephone number is called. In most, but not all areas, the sum of the REN of all devices connected to one line should not exceed five (5.0). To be certain of the number of devices you may connect to you line, as determined by the REN, you should contact your local telephone company to determine the maximum REN for your calling area. If your equipment causes harm to the telephone network, the telephone company may discontinue your service temporarily. If possible, they will notify you in advance. But if advance notice is not practical, you will be notified as soon as possible. You will be informed of your right to file a complaint with the FCC. Your telephone company may make changes in it is facilities, equipment, operations or procedures that could affect the proper functioning of your equipment. If they do, you will be notified in advance to give you an opportunity to maintain uninterrupted telephone service. If you experience trouble with this telephone equipment, please contact the following address and phone number for information on obtaining service or repairs. The telephone company may ask that you disconnect this equipment from the network until the problem has been corrected or until you are sure that the equipment is not malfunctioning. This equipment may not be used on coin service provided by the telephone company. Connection to party lines is subject to state tariffs. COMPANY: Belkin International, Inc. 23531_8820-00390_F7D2401 v1_Surf Modem Router_0205 change 1-310-604-2315 ADDRESS: 501 West Walnut Street, Compton, CA 90220-5221, USA TEL NO:

Europe European Union Radio products with the CE or CE alert marking comply with the R&TTE Directive (1999/5/EC) issued by the Commission of the European Community. Compliance with this directive implies conformity to the following European Norms (in brackets are the equivalent international standards). EN 60950-1:2006 (IEC60950-1) Product Safety EN 300 328 Technical requirement for radio equipment ETS 301 489 General EMC requirements for radio equipment. Information Products with the CE marking comply with the EMC Directive (2004/108/EC) and the Low Voltage Directive (2006/95/EC) issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European Product Family Standards. EN 55022 (CISPR 22) Electromagnetic Interference EN 55024-1 Electromagnetic Immunity EN 61000-3-2 (IEC610000-3-2) Power Line Harmonics EN 61000-3-3 (IEC610000) Power Line Flicker EN 60950-1 (IEC60950-1) Product Safety Products that contain the radio transmitter are sometimes labeled with the Notified Body number (CE0560) or CE alert marking if the standard used in the conformity is not harmonized across the European Community. 23531_8820-00390_F7D2401 v1_Surf Modem Router_0205 change

*Back cover 2010 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Mac and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries. Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. 8820-00390 F7D2401 Ok mk 12/15/09