FCC ID: VLJ-FOCUS67G Video Baby Monitor With Wi-Fi

Users Guide 2.8" Video Baby Monitor With Wi-Fi Models: MBP667CONNECT, MBP667CONNECT-2, MBP667CONNECT-3, MBP667CONNECT-4 FOCUS67, FOCUS67-G, FOCUS67-W MBP67CONNECT, MBP67CONNECT-G The features described in this Users Guide are subject to modifications without prior notice. Welcome... to your new Motorola Digital Video Baby Monitor!

Thank you for purchasing the Digital Video Baby Monitor. Now you can see and hear your baby sleeping in another room or you can monitor your older children in their play room. Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage. For product-related questions, please call:

US and Canada 1-888-331-3383 E-mail: support@motorolahome.com This User's Guide provides you with all the information you need to get the most from your product. Before you use the Digital Video Baby Monitor, we recommend that you insert and fully charge the battery in the Parent Unit, so that it continues to work if you disconnect it from the power supply. Please read the Safety Instructions on pages 7 - 9 before you install the Units. Got everything?

1 x Parent Unit 1 x Baby Unit (Camera) 1 x Rechargeable Ni-MH battery pack for the Parent Unit 1 x Battery door for Parent Unit 1 x Power adapter for Parent Unit 1 x Power adapter for Baby Unit In multi-camera packs, you will find one or more additional Camera Units with power adapters. Overview of the Parent Unit 34 2 1 10 11 12 13 5 6 7 8 9 6. Microphone 7. TALK button T Press and hold to speak to your baby. 8. DC Power micro-USB Socket 9. Menu button M Press to open menu options. 10. POWER ON/OFF button 0 Press and hold to turn the Unit on or off. 11. Battery Cover 12. Stand 13. Speaker 1. Display (LCD screen) 2. Sound Level indicators Show the sound level detected by the Baby Unit - the louder the sound detected, the more LEDs light up. The first green LED flashes while in pairing mode. 3. Power/Link indicator Lights up in green when the Parent Unit is turned on. 4. Charging indicator Lights up in blue when the power adapter is plugged in. Lights up in red when the battery is low. 5. Control key panel UP / VOLUME+

Press to increase speaker volume. When in a menu, press to scroll up. DOWN / VOLUME -

Press to decrease speaker volume. When in a menu, press to scroll down. LEFT / VIDEO ON-OFF Press to turn the display ON or OFF. When in a menu, press to choose the option on the left. RIGHT / ZOOM Press to zoom in or out. When in a menu, press to choose the option on the right. O When in a menu, press to choose an item, or save a setting. Parent Unit menu icons Signal Level Indication (4 Levels) Night Vision Mode (Video also changes to Black/White) Battery Level Indication (4 Levels) Volume Level Control (8 Levels + Off) Camera Control (scan, view, add, delete) Set Video On Timer (5min, 30min, 60min) Brightness Level Control (8 Levels) Zoom Level Control (1X, 2X) Lullaby Control (5 Song Selection or OFF) Alarm Setting (6h, 4h, 2h, OFF) Temperature Scale setting in menu (C / F). Readings turn RED if > 29C / 84F, and reading displays HH C / F > 36C / 97 F Readings turn RED if < 14C / 57F, and reading displays LL C / F < 1C / 34 F Multi-screen option (only available if more than one camera ed to the parent unit.) Overview of Your Baby Unit 2 3 4 1 5 6 7 8 9 7. PAIR button Press and hold to pair with a Parent Unit or Wi-Fi. 8. Power Adapter Socket 9. Temperature Sensor 1. POWER ON/OFF switch Slide to turn the Baby Unit on or off. Infrared LEDs (6) Light Sensor (Night Vision Mode) 2. Microphone 3. 4. 5. Camera Lens 6. Power/Link indicator Lights up in Blue when the Baby Unit is turned on and linking to the Parent Unit. Flashes in Blue when the Baby Unit is linked to the Parent Unit, or flashes in red when the Baby Unit is in pairing mode. Off when the Baby Unit is powered off. Important guidelines for installing your Digital Video Baby Monitor To use your Baby Unit and Parent Unit together, you must be able to establish a radio link between them, and the range will be affected by environmental conditions. Any large metal object, like a refrigerator, a mirror, a filing cabinet, a metallic door or reinforced concrete, between the Baby Unit and Parent Unit may block the radio signal. The signal strength may also be reduced by other solid structures, like walls, or by radio or electrical equipment, such as TVs, computers, cordless or mobile phones, fluorescent lights or dimmer switches. Other 2.4GHz products, such as wireless networks (Wi-Fi routers), Bluetooth systems, microwave ovens or other Baby Monitors, may cause interference with this product, so keep the Baby Monitor at least 5ft (1.5m) away from these types of product, or turn them off if they appear to be causing interference. If the signal is weak, try moving the Parent and/or the Baby Unit to different positions in the rooms. Always ensure that you have a good Wi-Fi connection available. Table of contents 2.1 2.2 2.3 2.4 3.1 3.2 3.3 3.4 3.5 1. Safety Instructions..................................................................................... 7 2. Getting Started........................................................................................ 10 Baby Unit Power Supply............................................................................ 10 Parent Unit Battery Installation.................................................................. 10 Parent Unit Power Supply ......................................................................... 11 Registration (ing)....................................................................................... 12 3. Using the Baby Monitor........................................................................... 14 Setting Up.................................................................................................. 14 Night Vision Mode .................................................................................... 14 Video ON/OFF ......................................................................................... 14 Talk Mode.................................................................................................. 14 Temperature Display (HH C / F or LL C / F)...................................... 14 4. Parent Unit Menu Options ...................................................................... 15 Adjust Speaker Volume ............................................................................ 15 4.1 LCD Brightness ......................................................................................... 15 4.2 4.3 Set Alarm Time on the Parent Unit............................................................ 15 4.4 Monitor the Temperature ......................................................................... 16 Remove a Baby Unit.................................................................................. 16 4.5 Set Screen Off time for the Parent Unit .................................................... 17 4.6 Zoom, Pan or Tilt ....................................................................................... 17 4.7 4.8 and Replace a Baby Unit .......................................................................... 17 4.9 Multi-Camera Use ..................................................................................... 18 5. Wi-Fi Internet Viewing.......................................................................... 19 5.1 Minimum System Requirements .............................................................. 19 5.2 Getting Started - Connecting Devices..................................................... 20 5.3 User Account and Camera Setup on Android Devices....................... 21 User Account and Camera Setup on iPhone/iPad ............................. 25 5.4 5.5 Camera Functions: ................................................................................... 31 5.6 Working with PC/Notebook .................................................................... 34 Procedure for Resetting the Camera....................................................... 34 5.7 6. Disposal of the Device (Environment)....................................................35 7. Cleaning ..................................................................................................36 8. Help..........................................................................................................37 9. General Information ................................................................................ 45 10. Technical Specifications .........................................................................51 6 Table of contents H S I L G N E 1. Safety Instructions WARNING:

Strangulation Hazard: Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 3ft

(1m) away). Never use extension cords with AC Adapters. Only use the AC Adapters provided. Safety Instructions 7 CAMERA SET UP & USE:

Choose a location for the Baby Unit that will provide the best view of your baby in his/her crib. Place the Baby Unit on a flat surface, such as a dresser, bureau or shelf, or mount the Baby Unit on a wall securely using the keyhole slots in the underside of the stand. NEVER place the Baby Unit or cords within the crib. WARNING This Digital Video Baby Monitor is compliant with all relevant standards regarding electromagnetic fields and is, when handled as described in the User's Guide, safe to use. Therefore, always read the instructions in this User's Guide carefully before using the device. Adult assembly is required. Keep small parts away from children when assembling. This product is not a toy. Do not allow children to play with it. This Digital Video Baby Monitor is not a substitute for responsible adult supervision. Keep this user's guide for future reference. Keep the cords out of reach of children. Do not cover the Digital Video Baby Monitor with a towel or blanket. Test this monitor and all its functions so that you are familiar with it prior to actual use. Do not use the Digital Video Baby Monitor in damp areas or close to water. Do not install the Digital Video Baby Monitor in extreme cold or heat, direct sunlight, or close to a heat source. Only use the chargers and power adapters provided. Do not use other chargers or power adapters as this may damage the device and battery pack. Only insert a battery pack of the same type. Do not touch the plug contacts with sharp or metal objects. Connect the power adapters to easily accessible power sockets. 8 Safety Instructions CAUTION There is a risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. FCC RF Radiation Exposure Statement Caution: This Transmitter must be installed to provide a separation distance of at least 20 cm from all persons. IC Radiation Dclaration d'exposition Attention: Cet metteur doit tre install pour fournir une distance de sparation d'au moins 20 cm de toute personne. H S I L G N E Safety Instructions 9 2. Getting Started 2.1 Baby Unit Power Supply ON/OFF switch 1. Connect the power adapter to an electrical outlet and insert the plug into 2. the DC power socket on the back of the Baby Unit (Camera). Slide the ON/OFF switch to the ON position. The power indicator LED will light up in blue, and flash slowly when linked to the Parent Unit. 3. To switch off the Baby Unit, slide the ON/OFF switch to the OFF position. NOTE Only use the enclosed power adapter (5V DC / 1000mA). 10 Getting Started Parent Unit Battery Installation 2.2 A rechargeable battery pack is supplied and should be installed and charged, so that the Parent Unit can be moved without losing the link and picture from the Baby Unit(s). Charge the battery in the Parent Unit before using it for the first time or when the Parent Unit indicates that the battery is low (flashes in red). H S I L G N E Black Red 1. Unclip and remove the battery compartment cover. 2. Insert the plug of the battery pack into the socket inside the battery compartment, and fit the battery pack into the compartment. 3. Replace the battery compartment cover, and pull out the desktop stand

(refer to section 2.4). Getting Started 11 2.3 Parent Unit Power Supply 1. Insert the DC Micro-USB plug of the power adapter into the micro-USB power socket on the side of the Parent Unit. 2. Connect the other end of the power adapter to a suitable electrical outlet. The blue Charging indicator turns on. IMPORTANT Only use the supplied power adapter (5V DC / 600mA) and battery pack. While the Parent Unit can work with the power adapter connected, without a battery pack, it is recommended that you install and charge the rechargeable battery pack fully before use. This will allow the Parent Unit to operate on battery in the event of a power failure, or when moving to a different room. 3. Once the Baby and Parent Units are both switched ON, the display on the Parent Unit will show the colour image captured by the Baby Unit. But if the room is dark, the image will be displayed in black and white and with a icon, due to infra-red illumination by the Baby Unit. 4. If there is no connection or you are out of range, the video display will go off, a symbol will appear on the LCD screen, and the Parent Unit will beep. Move the Parent Unit closer to the Baby Unit to re-establish the link. 12 Getting Started 2.4 Desktop Stand of the Parent Unit H S I L G N E Flip out the stand on the back of the Parent Unit to set up the desktop stand. Getting Started 13 3. Using the Baby Monitor 3.1 Place the Baby Unit in a convenient location (e.g. on a table) and point the Setting Up camera lens towards the area you want to monitor. Adjust the Baby Units camera angle by rotating it up, down, left and right until you are satisfied with the image that appears on the Parent Unit. M O Video ON/OFF Night Vision Mode NOTE Do not place the Baby Unit within reach of a child or baby. If there is interference with the picture or sound, try moving the Units to different locations, and ensure that they are not close to any other electrical equipment. 3.2 The Baby Unit has 6 high-intensity infrared LEDs for picking up clear images in the dark. When the built-in photo sensor on the front of the Unit detects a low level of ambient light, the LEDs will automatically activate and the screen on the Parent Unit will display in black and white. The icon will be displayed at the top of the screen. 3.3 Press the VIDEO On/Off button on or off, but still leaving the audio monitor on. 3.4 Press and hold the TALK button T on the Parent Unit to talk to your baby through the Baby Units loudspeaker. The T icon will be displayed at the top of the LCD screen. 3.5 The temperature reading from the temperature sensor at the back of the Baby Unit will be displayed at the top of the LCD screen. The readings will turn RED if the temperature goes above 29C / 84F or below 14C / 57F. The reading will change to HH C / F if the temperature goes above 36C / 97F. The reading will change to LL C / F if the temperature falls below 1C / 34F. Temperature Display (HH C / F or LL C / F) on the Parent Unit to turn the LCD display Talk Mode

<

>

14 Using the Baby Monitor Adjust Speaker Volume 4. Parent Unit Menu Options 4.1 You can adjust the speaker volume from Volume 1 to Volume 8, or turn it off Press + or - on the Parent Unit when it is in camera viewing mode. 4.2 You can adjust the brightness of the Parent Unit screen from level 1 to level 8. 1. Press M when the Parent Unit is in camera viewing mode. LCD Brightness

. H S I L G N E is displayed. M or to adjust the brightness. Set Alarm Time on the Parent Unit 2. Press 4.3 You can use the Parent Unit to set a 2, 4 or 6 hour alarm as a reminder for you to take care of your baby. If an alarm time is selected, the blue alarm icon will appear at the top of the screen. The Parent Unit will beep at the end of the selected 2, 4 or 6 hour period. The alarm will reset and start the next time period after 60 seconds or by pressing any button on the Parent Unit. Turn on and set the alarm when it is currently off:

1. Press M when the Parent Unit is in camera viewing mode. 2. Press 3. Press 4. Press M to save the setting and return to camera viewing mode. Turn off the alarm when it is currently on:

1. Press M when the Parent Unit is in camera viewing mode. 2. Press 3. Press 4. Press M to save the setting and return to camera viewing mode. to scroll to to choose Off. to choose 2h, 4h or 6h. to scroll to or or or or O O O O

. M M M

<

>

<

>

<

>

<

>

Parent Unit Menu Options 15 M

>

<

>

<

M

.

). O O or or or to scroll to Set lullaby 4.3.1 You can play melodies from the Baby Unit to comfort your baby. 1. Press M when the Parent Unit is in camera viewing mode. 2. Press 3. Press 4. Press O when a melody is selected, and then press to choose your desired melody (1- 5) or turn it off (

to increase or decrease the volume of the melody playing at the Baby Unit. The Lullaby icon appears at the top of the screen when a melody is selected. 5. Press M to save the setting and return to camera viewing mode. 4.4 Monitor the Temperature Your Baby Unit measures the surrounding temperature, which is displayed at the top of the Parent Unit screen. The reading only updates about once a minute, and should only be used as a general indication of the temperature around the Baby Unit. If the detected temperature goes beyond a preset temperature range (14-29oC/57-84oF) the temperature display changes to red. You can change the setting for the temperature format as follows:

4.4.1 Temperature Format You can choose to display the temperature in F or C. 1. Press M when the Parent Unit is in camera viewing mode. 2. Press 3. Press 4. Press M to save the setting and return to camera viewing mode. 4.5 1. Press M when the Parent Unit is in camera viewing mode. 2. Press 3. Press 4. Press O, then or 5. Press O, then press 6. Press O to confirm your selection. NOTE You cannot remove a Baby Unit if it is the only one paired. to select the desired Baby Unit (1, 2, 3 or 4). or Remove a Baby Unit to scroll to to select del. to choose YES or NO. to choose F or C. to scroll to or or or or O O O O

. M M M M

<

>

<

>

<

>

<

>

16 Parent Unit Menu Options H S I L G N E

>

<

>

<

M M

. O O or or Zoom to scroll to to zoom in. to zoom out. to select (60mins, 30mins, 5mins or OFF). Set Screen Off time for the Parent Unit 4.6 When the Parent Unit is operating on battery only, the screen turns off if no buttons are pressed for a specific time interval, to help extend the battery operation time. The audio will still be heard even when the screen is off. You can change the screen off time to 5mins, 30mins or 60mins. 1. Press M when the Parent Unit is in camera viewing mode. 2. Press 3. Press 4. Press O to confirm your selection. 4.7 You can zoom in or out while viewing the image from a Baby Unit. 1. Press 2. Press 4.8 The Baby Units and Parent Unit provided are already paired. You can add or replace a Baby Unit in your video and audio monitoring system. You can pair a maximum of four Baby Units to your Parent Unit. Each new Baby Unit must be paired to the Parent Unit before use and can only be paired with a vacant location on the Parent Unit. To pair a Baby Unit:

1. Press M when the Parent Unit is in camera viewing mode. 2. Press 3. Press 4. Press O then 5. Press O to put the Parent Unit into pairing mode. 6. Turn on the new Baby Unit, and then immediately press and hold PAIR until Pair and Replace a Baby Unit to choose a desired Baby Unit number. to scroll to to select add. or or or O O

. M M

<

>

>

<

the Power/Link indicator turns on. NOTE You cannot choose a Baby Unit number that is already occupied, but must remove an existing Baby Unit before pairing a new one. (See 4.5 for how to remove a paired Baby Unit camera.) Parent Unit Menu Options 17

, where the Parent Unit automatically cycles through the paired 4.9 Multi-Camera Use You can pair up to 4 cameras with the Parent Unit. If more than one camera is paired with the Parent Unit, you can select which camera to view or set it in Patrol mode cameras about every 15 seconds. You can also select a multi-picture screen option, where all the paired cameras can be viewed at the same time, but with smaller images. NOTE The audio from a camera can only be heard on the Parent Unit when that camera is selected. In the multi-picture screen option, the selected camera picture has a red frame. 4.9.1 To change the camera being viewed Press O when the Parent Unit is in camera viewing mode to scan through the paired cameras, 1, 2, 3, 4,

, with the selected option shown on the screen. Alternatively, select view (then cam1, cam2, cam3, cam4) or scan from the camera setting option in the menu. 4.9.2 Multi-picture option 1. Press M when the Parent Unit is in camera viewing mode. 2. Press 3. Press 4. The multi-picture view indicates the selected camera with a red frame, and to select OFF or ON. to scroll to or or O O O O

. M M M M

<

>

<

>

<

the audio is only heard from that selected camera. Press

>

to select a different camera.

,

,

<

or

>

18 Parent Unit Menu Options H S I L G N E 5. Wi-Fi Internet Viewing 5.1 Minimum System Requirements Web Portal Windows 7 Mac OS 10.7 Chrome 24 Safari 6 Java 7 Firefox 18.0 Adobe Flash Player 15.0 Android System Internet Explorer 9 Version 4.2 or above iPhone/iPad iOS Version 7.0 or above High Speed (Wi-Fi) Internet At least 0.6 Mbps upload bandwidth per camera (you can test your internet speed on this site: http://www.speedtest.net) Wi-Fi Internet Viewing 19 Getting Started - Connecting Devices 5.2 How does it work?

MBP667CONNECT Camera Wi-Fi Router Access your Camera locally. View your Camera from any compatible device remotely. Hubble Service When a user tries to access the Camera, the Hubble server will authenticate the users identity before it grants access to the Camera. 5.2.1 Connect the power adapter to an electrical outlet and insert the plug into the Setup DC power socket on the back of the Camera Unit. Slide the ON/OFF switch to the ON position. The Camera Unit must be within range of the Wi-Fi router with which you want to connect. Make sure that you have the password of the router for the setup process. Behavior of the status Indicator LED:

Pairing and setting up Unconnected Connected Ready for connection Flashes slowly in red Flashes slowly in blue Lights up in blue Flashes slowly in blue Note You can only setup via a compatible smartphone or tablet, and not via a PC. 20 Wi-Fi Internet Viewing H S I L G N E i M T d o r d n A User Account and Camera Setup on Android Devices 5.3 What you need Wi-Fi Camera Unit Power adapter for the Camera Device with AndroidTM system version 4.2 and above 5.3.1 Power ON and Connect the Camera Connect the power adapter to an electrical outlet and insert the plug into the DC power socket on the back of the Camera Unit. Make sure that the ON/OFF switch is in the ON position. The Cameras Red LED flashes after the Camera has finished booting. When you hear one beep, this means that the Camera is ready for setup. 5.3.2 Download Hubble for Motorola Monitors App Go to Google Play Store to search for "Hubble for Motorola Monitors". Download "Hubble for Motorola Monitors" App from Google Play Store and install it on your Android device 5.3.3 Run Hubble for Motorola Monitors App on Android device Ensure that your Android device is connected to your Wi-Fi router. Run "Hubble for Motorola Monitors" App, enter your account information, read through the Terms of Service, then select "I agree to the Terms of Use"

before you tap Create. (Picture A1) Note If you already have a Hubble App account, please select Already have an Account? to go to the next step. A1 Wi-Fi Internet Viewing 21 5.3.4 Add the Camera to your account Tap on the top right corner of the screen to add camera. (Picture A2) The following setup instructions will appear on the screen. (Picture A3) A2 Plug in and switch on the camera, and wait for a couple of minutes for it to A3 warm up. Tap Continue when the Camera LED starts to blink. 22 Wi-Fi Internet Viewing The following setup instructions will appear on the screen. (Picture A4) H S I L G N E i M T d o r d n A A4 Press and hold the PAIR button on the Camera Unit for 3 seconds. You will then hear a beep tone, followed by a voice prompt indicating that the Camera is ready for pairing. Tap Continue. The App will automatically search for and connect to your Camera as shown in the pictures below. (Pictures A5, A6) The blue/red colour LED on the Camera Unit will flash. A5 A6 Wi-Fi Internet Viewing 23 Select your Wi-Fi Network, enter your password and then tap Connect.

(Pictures A7, A8) A7 A8 It will take a few minutes for the Camera to connect to the Wi-Fi network before showing the connection status. (Pictures A9, A10) If connection fails, please tap Retry and repeat the steps starting from 5.3.4. A9 A10 Tap View Camera to view the video captured by the Camera Unit. The LED indicator on the Camera Unit will light up in blue. 24 Wi-Fi Internet Viewing H S I L G N E S O i User Account and Camera Setup on iPhone/iPad 5.4 What you need Wi-Fi Camera Unit Power adapter for the Camera iPhone / iPad with iOS version 7.0 and above 5.4.1 Power ON and Connect the Camera Connect the power adapter to an electrical outlet and insert the plug into the DC power socket at the back of the Camera. Make sure that the ON/OFF switch is in the ON position. The Camera's red LED flashes after the Camera has finished booting. When you hear one beep, this means that the Camera is ready for setup. 5.4.2 Download Hubble for Motorola Monitors App Go to App Store to search for "Hubble for Motorola Monitors". Download "Hubble for Motorola Monitors" App and install it on your iPhone/iPad. 5.4.3 Run Hubble for Motorola Monitors App on iPhone/iPad Ensure that your iPhone/iPad is connected to your Wi-Fi Router. Run the "Hubble for Motorola Monitors" App, enter your account information, read through the Terms of Service, and then select "I agree to the Terms of Service" before you tap Create. (Picture i1) Note:

If you already have a Hubble App account, please select Already have an Account? to go to the next step (Picture i1). Wi-Fi Internet Viewing 25 i1 5.4.4 Add the Camera to your account Tap on the top right corner of the screen to add camera. (Picture i2) The following Bluetooth setup instructions will appear on the screen. (Picture i2 i3) i3 26 Wi-Fi Internet Viewing Tap Settings and activate Bluetooth on your iPhone/iPad. (Pictures i4,i5) H S I L G N E S O i i4 i5 Press the HOME key to return to the home screen, then tap on "Hubble for Motorola Monitors" App to resume setup. The following setup instructions will appear on the screen. (Picture i6) Note that if Bluetooth is on, you will be brought to this step directly. Wait for a couple of minutes for the Camera Unit to warm up and tap Continue when the Camera LED indicator starts to blink. i6 Wi-Fi Internet Viewing 27 The following will appear on the screen. (Pictures i7, i8) i7 i8 Name the location of your Camera Unit and tap Continue. (Pictures i9, i10) i9 i10 28 Wi-Fi Internet Viewing The Camera Unit will search for the Wi-Fi network (Picture i11) and display a list of available networks. (Picture i12) H S I L G N E S O i i11 i12 Select your Wi-Fi network and tap Continue. (Picture i13) Enter your Wi-Fi password and tap Next. (Picture i14) i13 i14 It will take a few minutes for the Camera Unit to connect to the Wi-Fi network before showing the connection status. (Pictures i15, i16) Wi-Fi Internet Viewing 29 If connection fails, tap Retry and repeat the steps starting from 3.3.4. i15 i16 Tap View Live Camera to view the video captured by the Camera Unit. The LED indicator on the Camera Unit will light up in blue. 30 Wi-Fi Internet Viewing Camera Functions:

5.5 5.5.1 Connecting the Camera Unit to power Connect the power adapter to an electrical outlet and insert the plug into the DC power socket on the back of the Camera Unit. Slide the ON/OFF switch to the ON position. The power indicator LED will light up in green. (Note: To switch off the device, slide the ON/OFF switch to OFF.) H S I L G N E Run the Hubble App on your smart device. 5.5.2 Overview of the Features on Hubble App Menu Tap Cameras Tap Event Log to access the camera list. to access the video record list that is triggered by Motion or Sound detection. Tap Account to access user Profile, subscription Plan, Notifications setting, Remote Connection Setting and About Hubble Photo/Video Take a photo or record a video from your Camera. Tap the Video icon to activate Video function. Tap and hold the red button start recording and release to stop. to Tap the Camera icon to switch to Camera mode. You can capture photos from Camera view. Note:

Photos and videos will be stored in the internal flash memory of your smart device, and can be accessed via the Gallery or Media Player

(AndroidTM Device). To play videos, please use the Hubble App. Wi-Fi Internet Viewing 31 Lullaby Temperature Measure Two-way communication Tap to access the Melody menu and select one of the 5 pre-set melodies you wish to play on your Camera Unit. The temperature reading from the temperature sensor at the back of the Camera Unit will display on the screen of your Android device. The readings will turn RED if the temperature goes beyond the High/Low temperature that was set in your Account. Tap to activate the function. Press the round button Unit. Toggle the button again to listen to the audio feedback from the Camera Unit. once to speak through the Camera Speaker Tap to toggle speaker on or off. Zoom Slide the scroll bar on the right hand side of the screen to zoom in or zoom out. You can also use the pinch-in and pinch-out gestures to zoom out or zoom in a picture. To use pinch-to-zoom gesture, your device must support multi-touch technology. 32 Wi-Fi Internet Viewing Camera Setting H S I L G N E You can change the Camera settings by tapping on the Tap Details to review Camera Name, Cloud Settings icon. Subscription, Change Image, Timezone, Camera Model, Firmware Version and Delete All Events. Tap Notifications to set the sensitivity of Sound Detection, Motion Detection and to set Alerts for High temperature (Up to 33 oC or 91 oF) /

Low temperature (down to 10o C or 50 oF). Tap Settings to set Ceiling mount, Brightness and Volume. Add Camera Enter Add Camera procedures. Delete All Events Tap to delete all events. Select Events Check the box to select recorded event(s). Edit Events Tap to select and delete event(s). Delete Events Tap to delete selected event(s). Wi-Fi Internet Viewing 33 5.6 Working with PC/Notebook Go to https://app.hubbleconnected.com/#login Enter your User Name and Password, and then click Login if you have already created an account. Click on the Camera list paired in your account via Android device or iPhone/iPad, and the Camera view will appear on screen. You can easily stay connected with your favorite people, places and pets with live video streaming. On the website, you can change the Settings by following the menu instructions. Procedure for Resetting the Camera 5.7 Note: If your Camera is moved from one router (e.g. home) to another (e.g. office) or you have Camera setup issues, then the Camera must be reset. Please reset the Camera with the following procedures:

1. 2. Press and hold the PAIR button, then slide the ON/OFF switch to ON. 3. Release the PAIR button when you hear a confirmation beep and wait for Slide the ON/OFF switch to OFF. the Camera Unit to complete an internal reset procedure. The LED indicator will turn red and flash slowly when the Camera Unit is reset successfully. 4. You can add your Camera again by following the steps in section 5.3.4 for AndroidTM devices or in section 5.4.4 for iOS devices. 34 Wi-Fi Internet Viewing H S I L G N E 6. Disposal of the Device (Environment) At the end of the product life cycle, you should not dispose of this product with normal household waste. Take this product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user's guide and/or box indicates this. Some of the product materials can be re-used if you take them to a recycling point. By reusing some parts or raw materials from used products you make an important contribution to the protection of the environment. Please contact your local authorities in case you need more information on the collection points in your area. Dispose of the battery pack in an environmentally-friendly manner according to your local regulations. Disposal of the Device (Environment) 35 7. Cleaning Clean your Digital Video Baby Monitor with a slightly damp cloth or with an anti-

static cloth. Never use cleaning agents or abrasive solvents. Cleaning and care Do not clean any part of the Digital Video Baby Monitor with thinners or other solvents and chemicals - this may cause permanent damage to the product which is not covered by the warranty. Keep your Digital Video Baby Monitor away from hot, humid areas or strong sunlight, and do not let it get wet. Every effort has been made to ensure high standards of reliability of your Digital Video Baby Monitor. However, if something does go wrong, please do not try to repair it yourself - contact Customer Service for assistance. IMPORTANT Always switch off and disconnect the power adapter before cleaning your Digital Video Baby Monitor. 36 Cleaning 8. Help Display No display Try recharging or replacing the battery pack. Reset the Units. Disconnect the battery pack of the Parent Unit and unplug H S I L G N E both the Units' electrical power, then plug them back in. Is the Unit turned on?

Press and hold the ON/OFF button on the Parent Unit to turn it ON. Is the correct camera selected? Change the camera number, if necessary. Is the video display turned on? Press the VIDEO ON/OFF button to turn it ON. O M

<

>

When operating using batteries only, the display will go blank after 5 minutes or 30 minutes or 60 minutes to save power (depending on video settings). The Unit is still active and will give you audio alerts. You can reactivate the screen by pressing any button. O M Registration

<

If the Baby Unit has lost its link with the Parent Unit Try recharging or replacing the battery pack.

>

If the Baby Unit is too far away it may be going out of range, so move the Baby Unit closer to the Parent Unit. Reset the Units by disconnecting them from the battery and electrical power. Wait about 15 seconds before reconnecting. Allow up to one minute for the Baby Unit and the Parent Unit to synchronise. See 4.8 Pair and Replace a Baby Unit, if there is a need to re-register the Units. Interference Noise interference on your Parent Unit Your Baby and Parent Units may be too close. Move them further apart. Make sure there is at least 3 to 6ft (1 to 2m) between the 2 Units to avoid audio feedback. lf the Baby Unit is too far away, it may be out of range. Move the Baby Unit closer to the Parent Unit. Help 37 Make sure that the Baby and Parent Units are not near other electrical equipment, such as a television, computer or cordless/mobile telephone. Use of other 2.4 GHz products, such as wireless networks (Wi-Fi routers), Bluetooth systems, or microwave ovens, may cause interference with this product. Keep the Baby Monitor at least 5ft (1.5m) away from these types of products, or turn them off if they appear to be causing interference. If the signal is weak, try moving the Parent and/or Baby Unit to different positions in the rooms. Noise interference on your device To avoid background noise or echoes, ensure that there is enough distance between your device and the Wi-Fi Camera Unit. Use of other 2.4 GHz products, such as Bluetooth systems or microwave ovens, may cause interference with this product. Keep the Wi-Fi Camera Unit at least 5ft (1.5m) away from these types of products, or turn them off if they appear to be causing interference. Lost connection Check your Wi-Fi settings. If necessary, reconnect your Wi-Fi. Ensure that the Wi-Fi Camera Unit is switched ON. Wait a few minutes to make the connection with the Wi-Fi system. If you forgot your password If you do not remember your Hubble password, tap Forgot Password and submit your e-mail address. A new password will be sent to your e-mail address immediately. 38 Help H S I L G N E Troubleshooting for Wi-Fi Internet Viewing Category Problem Solution Account Account Account Account Camera Connectivity issues Description / Error I am unable to login even after registration. I receive an error message saying: "Email ID is not registered". What do I do if I forget my password?

I am unable to receive a new password although I have used the "Forgot password" option. Please check your user name and password. Please ensure that you have registered with us. Tap Create Account to create an account. Click on the "Forgot Password" link on https://app.hubbleconnected.com/

#lostpassword OR on your Android or iOS application. An email will be sent to your registered email address. 1. The e-mail might have been sent to your Junk Mail Folder. Please check your Junk Mail Folder. 2. There might be a delay in getting your e-mail. Please wait a few minutes and refresh your email account. When I try to view the Camera, I get a prompt for Camera firmware upgrade. What should I do?

I found interference caused by my other webcam devices. Please upgrade your firmware. This takes around 5 minutes. We push upgrades from time to time to improve Camera features. Video streaming performance is related to internet bandwidth, especially if you have 2 or more video streaming devices that are working through the same router. Help 39 Connectivity Issues Connectivity Issues Connectivity Issues I get a message: We are having problems accessing your Camera. This could be due to the lack of an internet connection. Please wait and try again later. Even though I am accessing my Camera from the same Wi-Fi network, I still find my Camera is shown as remote. I can only access it for 5 minutes at a time. I am not able to access my Camera. Features Features The sound alert setting threshold is not right. How many users can access the Camera at one time?

1. Please try again in a few minutes. This could be because of any issue with your internet connection. If the problem remains, please restart your Camera to check if this fixes the problem. 2. 3. Please restart your Wireless Router. Please check your wireless router settings. For example, for Buffalo brand routers there is an option called Wireless Isolation. Please disable this option. range. If the LED on your Please check if the Camera is within Wi-Fi Camera is flashing slowly, please try to move the Camera closer to the router for better Wi-Fi connectivity and try again. You can Adjust Sound Sensitivity to trigger notifications under Camera Setting menu. If you are accessing in Local Mode, two users are supported, after two users all streaming will go through the remote server. This allows for unlimited user access to a single Camera at one time. 40 Help General What are the supported browsers for accessing from my PC/

Mac?

General What is the significance of LED flashing?

General Which platforms are supported for accessing my Camera?

H S I L G N E We recommend using Google Chrome 24 or above. However the following browsers are also supported:

Internet Explorer 9.0 or above (for PC), Safari 6.0 or above (for Mac) or Firefox 18.0 or above (both PC or Mac). A flashing LED indicates the following status:

Slow flashing: 1. Your Camera is in setup mode. You can add the Camera to your account in this mode. Out of the box, the Camera is in Setup mode. To reset to Setup mode, press and hold the PAIR button on the Camera until you hear a beep. Slow flashing: 2. The Camera is either connecting to the router or has lost the link to the router. Please ensure that the Camera is in the Wi-Fi LED is stable: The Camera is connected to the Wi-Fi Minimum requirement:

Windows 7*

*Java browser plug-in needed Mac OS version 10.7 Chrome version 24 Internet Explorer Safari version 6 Java version 7 Firefox version 18.0 Adobe Flash Player 15.0 Android 4.2 iPhone /iPad iOS version 7.0 signal range. version 9 network. Help 41 General General I do not hear any sound when I am accessing a remote Camera. What is the meaning of

"Local Camera" and

"Remote Camera"?

General How do I download the App for Android and iOS devices?

You can tap on the speaker icon in the video stream screen to hear audio. By default the audio is not ON when you are accessing a remote Camera. When you are accessing your Camera from the same wireless network (Home) in which it is configured, it is a Local Camera. When you are accessing your Camera away from your home it is a Remote Camera. You may be using 3G, 4G or 4G LTE or a Wi-Fi connection outside of your home. Android:

- Open the Google Play Store on your Android device.

- Select Search

- Type in "Hubble for Motorola Monitors"

- The results will show the Hubble App

- Select to install it iOS Device:

- Open the App StoreSM

- Select Search

- Type in "Hubble for Motorola Monitors"

- The results will show the Hubble App

- Select to install it 42 Help Setting up When the video is cut off, the application attempts to reconnect and this results in lost sound and choppy video. Setting Up While I am adding a new Camera to my account, I am not able to find any Cameras to add. Setting Up During setup on devices for Android and iOS, I am not able to find my Camera during the last step and the setup fails. Viewing Camera When I am in "remote mode", the video stops after 5 minutes. How do I view for longer?

You will need to turn off the Auto Lock function of your device to ensure continuous video/audio streaming. H S I L G N E If you are trying to add a Camera which has previously been added into your account or another account, you will first have to reset the Camera. This can be done by pressing and holding the PAIR button on the Camera for 5 seconds. Please reset the Camera to setup mode and try again. Press and hold the PAIR button on the Camera until you hear a beep. Wait for a minute for the Camera to restart. When the Camera LED is flashing, this indicates that it is in setup mode. Now restart the setup from your smartphone again. When you are accessing your Camera via a network different from your home network (over the internet) your video times out after 5 minutes. You can click on the Camera again from the Android/iOS application to start streaming again. If you are accessing from your web-

browser, then you can press on the Reload button to start viewing your Camera video stream again. Help 43 9. General Information If your product is not working properly... 1. Read this User's Guide or the Quick Start Guide. 2. Visit our website: www.motorolahome.com 3. Contact Customer Service at US and Canada 1-888-331-3383 E-mail: support@motorolahome.com To order a replacement battery pack for parent Unit, contact customer service. Consumer Products and Accessories Limited Warranty

("Warranty") Thank you for purchasing this Motorola branded product manufactured under license by Binatone Electronics International LTD ("BINATONE") What Does this Warranty Cover?

Subject to the exclusions contained below, BINATONE warrants that this Motorola branded product ("Product") or certified accessory ("Accessory") sold for use with this product that it manufactured to be free from defects in materials and workmanship under normal consumer usage for the period outlined below. This Warranty is your exclusive warranty and is not transferable. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS THAT VARY BY STATE, PROVINCE OR COUNTRY. FOR CONSUMERS WHO ARE COVERED BY CONSUMER PROTECTION LAWS OR REGULATIONS IN THEIR COUNTRY OF PURCHASE OR, IF DIFFERENT, THEIR COUNTRY OF RESIDENCE, THE BENEFITS CONFERRED BY THIS LIMITED WARRANTY ARE IN ADDITION TO ALL RIGHTS AND REMEDIES CONVEYED BY SUCH CONSUMER PROTECTION LAWS AND REGULATIONS. FOR A FULL UNDERSTANDING OF YOUR RIGHTS YOU SHOULD CONSULT THE LAWS OF YOUR COUNTRY, PROVINCE OR STATE. 44 General Information H S I L G N E Who is covered?

This Warranty extends only to the first consumer purchaser, and is not transferable. What will BINATONE do?

BINATONE or its authorized distributor at its option and within a commercially reasonable time, will at no charge repair or replace any Products or Accessories that do not conform to this Warranty. We may use functionally equivalent reconditioned/ refurbished/ pre-owned or new Products, Accessories or parts. What Other Limitations Are There?

ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. IN NO EVENT SHALL MOTOROLA OR BINATONE BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT OR ACCESSORY, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS OR ACCESSORIES TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW. Some jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights, and you may also have other rights that vary from one jurisdiction to another. General Information 45 Products Covered Consumer Products Consumer Accessories Consumer Products and Accessories that are Repaired or Replaced Length of Coverage One (1) year from the date of the products original purchase by the first consumer purchaser of the product. Ninety (90) days from the date of the accessories original purchase by the first consumer purchaser of the product. The balance of the original warranty or for ninety (90) days from the date returned to the consumer, whichever is longer. Exclusions Normal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal wear and tear are excluded from coverage. Batteries. Only batteries whose fully charged capacity falls below 80% of their rated capacity and/or batteries that leak are covered by this Warranty. Abuse & Misuse. Defects or damage that result from: (a) improper operation, storage, misuse or abuse, accident or neglect, such as physical damage (cracks, scratches, etc.) to the surface of the product resulting from misuse; (b) contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; (c) use of the Products or Accessories for commercial purposes or subjecting the Product or Accessory to abnormal usage or conditions; or (d) other acts which are not the fault of MOTOROLA or BINATONE, are excluded from coverage. Use of Non-Motorola branded Products and Accessories. Defects or damage that result from the use of Non-Motorola branded or certified Products or Accessories or other peripheral equipment are excluded from coverage. 46 General Information H S I L G N E Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by someone other than MOTOROLA, BINATONE or its authorized service centers, are excluded from coverage. Altered Products. Products or Accessories with (a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola branded housings, or parts, are excluded from coverage. Communication Services. Defects, damages, or the failure of Products or Accessories due to any communication service or signal you may subscribe to or use with the Products or Accessories is excluded from coverage. How to Obtain Warranty Service or Other Information?

To obtain service or information, please call:

US and Canada 1-888-331-3383 Email: support@motorolahome.com You will receive instructions on how to ship the Products or Accessories at your expense and risk, to a BINATONE Authorized Repair Center. To obtain service, you must include: (a) the Product or Accessory; (b) the original proof of purchase (receipt) which includes the date, place and seller of the Product; (c) if a Warranty card was included in your box, a completed Warranty card showing the serial number of the Product; (d) a written description of the problem; and, most importantly; (e) your address and telephone number. These terms and conditions constitute the complete warranty agreement between you and BINATONE regarding the Products or Accessories purchased by you, and supersede any prior agreement or representations, including representations made in any literature publications or promotional materials issued by BINATONE or representations made by any agent, employee or staff of BINATONE, that may have been made in connection with the said purchase. General Information 47 FCC and IC regulations FCC Part l5 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to Increase the separation between the equipment and receiver. which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this device. To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC criteria. This Class B digital apparatus complies with Canadian ICES-003. CAN ICES-3(B)/NMB-3(B) 48 General Information H S I L G N E WARNING Changes or modifications, to this equipment not expressively approved by the party responsible for compliance could void the users authority to operate the equipment. The socket-outlet shall be installed near the equipment and shall be easily accessible. Industry Canada This device complies with Industry Canada licence-exempt RSS standard(s):

Operation is subject to the following Two conditions:(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The term "IC: " before the certification/registration number only signifies that the Industry Canada technical specifications were met. This product meets the applicable Industry Canada technical specifications. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Declaration of Conformity Trade Name:

Models:

Responsible party:

Address:

Telephone Number:

Motorola MBP667CONNECTBU, MBP667CONNECTPU Binatone North America Inc., 11550 North Meridian Street, Suite 525, Carmel, IN 46032-6956, United States 317-313-0581 General Information 49 10. Technical Specifications BABY UNIT (Model: MBP667CONNECTBU) Frequency Image sensor IR LED Power Adapter 2400 MHz to 2483.5 MHz color CMOS 0.3M Pixels 6 pcs Ten Pao International Ltd. S005BNU0500100 Input 100-240V AC, 50/60Hz, 150mA;

Output: 5.0V DC, 1000mA or, ZhongShan Baolijin Electronic Co., Ltd BLJ06W050100P1-U Input: 100-240V AC, 50/60Hz, 200mA;

Output: 5.0V DC, 1000mA WARNING Use only with provided power supply. 50 Technical Specifications H S I L G N E PARENT UNIT (Model: MBP667CONNECTPU) 2400 MHz to 2483.5 MHz 2.8" diagonal Frequency Display Brightness control 8 steps Volume control Power Adapter Ten Pao International Ltd. 8 steps + off S005BNU0500100;

Input: 100-240V, 50/60Hz 150mA;

Output: 5.0V, 1000mA or, ZhongShan Baolijin Electronic Co., Ltd BLJ06W050100P1-U Input: 100-240V AC, 50/60Hz, 200mA;

Output: 5.0V DC, 1000mA WARNING Use only with provided power supply. Battery:

JUSTHIGH Ni-MH AAA 3.6V 900mAh rechargeable battery pack WARNING Do not use non-rechargeable batteries for the Parent Unit. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Specifications are subject to change without prior notice. Technical Specifications 51 Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. Apple logo and Safari are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Google Play, Android, and Chrome are trademarks of Google Inc. Wi-Fi is a trademark of the Wi-Fi Alliance. Internet Explorer and Windows are trademarks of the Microsoft group of companies. Firefox is a registered trademark of the Mozilla Foundation. Adobe and Flash are either registered trademarks or trademarks of Adobe Systems Incorporated. Java is a registered trademark of Oracle and/or its affiliates. All other trademarks are the property of their respective owners. 2017 Motorola Mobility LLC. All rights reserved. US_EN Version 2.0 Printed in China

Part Name:

Product Label Set_NA Binatone Labeling File Part Name: Baby Unit Revision History-

V2. Updated for GM chips. MODEL: FOCUS67 INPUT: DC5V 1000mA Use Only Power Supplies listed in the users guide. MADE IN CHINA 101918K000001 Camera HD-0367XXXXXX FCC ID: VLJ-FOCUS67G IC: 4522A-FOCUS67G HVIN: FOCUS67G Camera HD-0367XXXXXX UDID Label Stick on Camera bottom. Camera ID: Camera HD-0367XXXXXX (6 digits) Code Format: code 128 1) Colour: White background black letters 2) Material: adhesive label with plastic lamination on top MODEL: FOCUS67 INPUT: DC5V 1000mA Use Only Power Supplies listed in the users guide. MADE IN CHINA MODEL: FOCUS67-G INPUT: DC5V 1000mA Use Only Power Supplies listed in the users guide. MADE IN CHINA MODEL: FOCUS67-W INPUT: DC5V 1000mA Use Only Power Supplies listed in the users guide. MADE IN CHINA 101918K000001 XXXXX8K000001 XXXXX8K000001 Rating Label(BU) Material: 50# PET Size : 40x22mm FCC ID: VLJ-FOCUS67G IC: 4522A-FOCUS67G HVIN: FOCUS67G FCC/IC ID Label(BU) Material: 50# PET Size : 19.5 x 9.5 mm 101918K000001 Serial Number Stick on Unit bottom, Gift box

- Model number : 10191= FOCUS67

- Production Date Code: 8K (November/2018)

- Serial no. start from 000001 (6 digits)

- Code Format: code 128 1) Colour: White background black letters. 2) Size:30 x 10mm (Gift box). Part Name:

Product Label Set_NA Binatone Labeling File Part Name: Baby Unit Revision History-

V3 Changed PU battery from 800mAh to 900 mAh;

V4. Changed BU rating label for new BU bottom. V5. Updated PU to DC from micro-USB. V6. Updated PU rating label and moto logo. V7. Updated for GM chips. MODEL: MBP667CONNECTBU INPUT: DC5V 1000mA Use Only Power Supplies listed in the users guide. MADE IN CHINA 426918K000001 Camera HD-3667XXXXXX FCC ID: VLJ-FOCUS67G IC: 4522A-FOCUS67G HVIN: FOCUS67G MODEL: MBP667CONNECTBU INPUT: DC5V 1000mA Use Only Power Supplies listed in the users guide. MADE IN CHINA 426918K000001 Rating Label(BU) Material: 50# PET Size : 40x22mm FCC ID: VLJ-FOCUS67G IC: 4522A-FOCUS67G HVIN: FOCUS67G FCC/IC ID Label(BU) Material: 50# PET Size : 19.5 x 9.5 mm Camera HD-3667XXXXXX UDID Label Stick on Camera bottom. Camera ID: Camera HD-3667XXXXXX (6 digits) Code Format: code 128 1) Colour: White background black letters 2) Material: adhesive label with plastic lamination on top 426918K000001 Serial Number Stick on Unit bottom, Gift box

- Model number : 42691= MBP667CONNECT

- Production Date Code: 8K (November/2018)

- Serial no. start from 000001 (6 digits)

- Code Format: code 128 1) Colour: White background black letters. 2) Size:30 x 10mm (Gift box). Part Name:

Product Label Set_NA Binatone Labeling File Part Name: Baby Unit Revision History-

V1 7-Nov-2017 Initial release. V2 14-Nov-2018 Updated for GM solution. MODEL: MBP668CONNECTBU INPUT: DC5V 1000mA Use Only Power Supplies listed in the users guide. MADE IN CHINA 427017K000001 Camera HD-1668XXXXXX FCC ID: VLJ-FOCUS67G IC: 4522A-FOCUS67G HVIN: FOCUS67G Camera HD-1668XXXXXX UDID Label Stick on Camera bottom. Camera ID: Camera HD-1668XXXXXX (6 digits) Code Format: code 128 1) Colour: White background black letters 2) Material: adhesive label with plastic lamination on top MODEL: MBP668CONNECTBU INPUT: DC5V 1000mA Use Only Power Supplies listed in the users guide. MADE IN CHINA 427017K000001 Rating Label(BU) Material: 50# PET Size : 40x22mm FCC ID: VLJ-FOCUS67G IC: 4522A-FOCUS67G HVIN: FOCUS67G FCC/IC ID Label(BU) Material: 50# PET Size : 19.5 x 9.5 mm 427017K000001 Serial Number Stick on Unit bottom, Gift box

- Model number : 42701= MBP668CONNECT

- Production Date Code: 7K (November/2017)

- Serial no. start from 000001 (6 digits)

- Code Format: code 128 1) Colour: White background black letters. 2) Size:30 x 10mm (Gift box). Part Name:

Product Label Set_NA Binatone Labeling File Part Name: Baby Unit Revision History-

V3. Updated for GM chips. MODEL: MBP67CONNECT INPUT: DC5V 1000mA Use Only Power Supplies listed in the users guide. MADE IN CHINA 418818K000001 Camera HD-0367XXXXXX FCC ID: VLJ-FOCUS67G IC: 4522A-FOCUS67G HVIN: FOCUS67G Camera HD-0367XXXXXX UDID Label Stick on Camera bottom. Camera ID: Camera HD-0367XXXXXX (6 digits) Code Format: code 128 1) Colour: White background black letters 2) Material: adhesive label with plastic lamination on top MODEL: MBP67CONNECT INPUT: DC5V 1000mA Use Only Power Supplies listed in the users guide. MADE IN CHINA MODEL: MBP67CONNECT-G INPUT: DC5V 1000mA Use Only Power Supplies listed in the users guide. MADE IN CHINA 418818K000001 41XXX8K000001 Rating Label(BU) Material: 50# PET Size : 40x22mm FCC ID: VLJ-FOCUS67G IC: 4522A-FOCUS67G HVIN: FOCUS67G FCC/IC ID Label(BU) Material: 50# PET Size : 19.5 x 9.5 mm 418818K000001 Serial Number Stick on Unit bottom, Gift box

- Model number : 41881= MBP67CONNECT

- Production Date Code: 8K (November/2018)

- Serial no. start from 000001 (6 digits)

- Code Format: code 128 1) Colour: White background black letters. 2) Size:30 x 10mm (Gift box). Part Name:

Product Label Set_NA Binatone Labeling File Part Name: Baby Unit MODEL: MBP844CONNECTBU INPUT: DC5V 1000mA Use Only Power Supplies listed in the users guide. MADE IN CHINA 419818D000001 Camera HD-3844XXXXXX FCC ID: VLJ-FOCUS67G IC: 4522A-FOCUS67G HVIN: FOCUS67G Camera HD-3844XXXXXX UDID Label Stick on Camera bottom. Camera ID: Camera HD-3844XXXXXX (6 digits) Code Format: code 128 1) Colour: White background black letters 2) Material: adhesive label with plastic lamination on top MODEL: MBP844CONNECTBU INPUT: DC5V 1000mA Use Only Power Supplies listed in the users guide. MADE IN CHINA 413818D000001 Rating Label(BU) Material: 50# PET Size : 40x22mm FCC ID: VLJ-FOCUS67G IC: 4522A-FOCUS67G HVIN: FOCUS67G FCC/IC ID Label(BU) Material: 50# PET Size : 19.5 x 9.5 mm 419818D000001 Serial Number Stick on Unit bottom, Gift box

- Model number : 41981= MBP844CONNECT

- Production Date Code: 8D (April/2018)

- Serial no. start from 000001 (6 digits)

- Code Format: code 128 1) Colour: White background black letters. 2) Size:30 x 10mm (Gift box). Release History:

V4 4-Dec-2018 Updated for External Antenna. V5 20-Dec-2018 Updated for GM solution. Part Name:

Product Label Set_NA Binatone Labeling File Part Name: Baby Unit Release History:

V1 24-Oct-2016 Initial release. V2 10-Apr-2017 Updated BU Label area. V3 4-Dec-2018 Updated for External Antenna. V4 20-Dec-2018 Updated for GM solution. MODEL: MBP845CONNECTBU INPUT: DC5V 1000mA Use Only Power Supplies listed in the users guide. MADE IN CHINA 413818D000001 Camera HD-3845XXXXXX FCC ID: VLJ-FOCUS67G IC: 4522A-FOCUS67G HVIN: FOCUS67G Camera HD-3845XXXXXX UDID Label Stick on Camera bottom. Camera ID: Camera HD-1845XXXXXX (6 digits) Code Format: code 128 1) Colour: White background black letters 2) Material: adhesive label with plastic lamination on top MODEL: MBP845CONNECTBU INPUT: DC5V 1000mA Use Only Power Supplies listed in the users guide. MADE IN CHINA 413818D000001 Rating Label(BU) Material: 50# PET Size : 40x22mm FCC ID: VLJ-FOCUS67G IC: 4522A-FOCUS67G HVIN: FOCUS67G FCC/IC ID Label(BU) Material: 50# PET Size : 19.5 x 9.5 mm 413818D000001 Serial Number Stick on Unit bottom, Gift box

- Model number : 41381= MBP845CONNECT

- Production Date Code: 8D (April/2018)

- Serial no. start from 000001 (6 digits)

- Code Format: code 128 1) Colour: White background black letters. 2) Size:30 x 10mm (Gift box).

Authority to Act as Agent Date: 24 October 2018 TUV Rheinland Group 762 Park Avenue Youngsville, NC 27596 To Whom It May Concern:

I appoint TUV Rheinland (Shenzhen) Co., Ltd. and Mr. Ryan Yang to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC or Industry Canadas regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TUV Rheinland Group, still resides with Binatone Electronics International Ltd. / Floor 23A, 9 Des Voeux Road West, Sheung Wan, Hong Kong For TCB applications, We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date:

23 October 2019 Karl Heinz Mueller

(Print Name) CTO Telephone

+852 2803 7388 On behalf of

Binatone Electronics International Ltd.

(Company Name) Page 1 of 1 Revision 0 By Title

QF094234

Confidentiality Letter Date: 18 December 2018 Subject: Confidentiality Request for FCC ID: VLJ-FOCUS67G and IC ID: 4522A-FOCUS67G Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC/IC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent Permanent Permanent Permanent Permanent Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Part List/Tune-Up Procedure Schematics Test Setup Photos Users Manual Binatone Electronics International Ltd. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-

1705. Sincerely,

(Signature/Title) Ryan Yang

(Print name) By:

Difference Declaration Original Model No. Adding Model No.

: MBP667CONNECTBU

: FOCUS67, FOCUS67-G, FOCUS67-W, MBP67CONNECT, MBP67CONNECT-G, MBP668CONNECTBU, MBP844CONNECTBU, MBP845CONNECTBU To whom it may concern, We, Binatone Telecom Plc. would like to declare those models are identical in electrical circuit design and PCB layout.The only difference is model name:

Model No. FOCUS67 FOCUS67-G FOCUS67-W MBP667CONNECTBU MBP67CONNECT MBP67CONNECT-G MBP668CONNECTBU MBP844CONNECTBU MBP845CONNECTBU Baby Unit Parent Unit

(Qty)

(Qty) Colour (if any) 1 x BU 1 x BU 1 x BU 1 x BU 1 x BU 1 x BU 1 x BU 1 x BU 1 x BU none none none none none none none none none Sincerely yours, Applicant Address

: Binatone Electronics International Ltd.

: Floor 23A, 9 Des Voeux Road West, Sheung Wan, Hong Kong Signature

Name and title

: Karl Heinz Mueller / CTO Email

: kh.muller@binatoneglobal.com Tel. Date :

: +852 2802 7388 07 January 2019