User Manual DC Tubular motor ABC-05 WARNING:
Important safety instructions. Follow all instructions, since incorrect installation can lead to severe injury. WARNING:
Do not make repairs yourself. Do not attempt to open the device or disassemble it. You run the risk of electric shock and voiding the limited warranty. No user-serviceable parts are inside. indoor use only 1. General information The ABC-05 is a tubular motor to motorize Coulisse Absolute Roller. The tubular motor is compatible with Coulisse tubes and makes it possible to operate your blind motorised with minimum noise. The motors are operated with a Coulisse remote control only. Endpoints and favorite position are set with the remote control. The motor is energy ef cienct and can also be battery operated. 1.1 General dimensions L2 L1 1 D Type ABC-05 1.2 Performances Type Power supply L1 L3 1 d 1.1A L2 250 11 L3 D1 d1 243 40 26.5 Rated power Torq - rpm Operating temp. Max. channels to pair ABC-05 12-24V DC 0.6A - 7W 0.8Nm - 28 rpm 5-60 32 channels 1.3 Compatibility Type Roller Venetian Other ABC-05 28, 30, 35mm
1.4 Connectors and buttons Program button 12-24V DC -0.6A input
2. Programming and operating 2.1 First use Step 1: Connect the motor with the 12V powersupply Step 5: Set endpositions (the positions can also be set after rst installation) First set the upper endposition 1. 2. Action con rmed:
blind stops stepping for 3 seconds Use the up and down buttons to go to the upper endposition Set the position by pressing the center + down button Then set the lower endposition 1. 2. Action con rmed:
blind stops stepping for 3 seconds Use the up and down buttons to go to the lower endposition Set the position by pressing the center + up button Step 6: Exit the program-mode by pressing the program button again Exit program mode:
Shortly press program button 2.2 Normal use
- Manual Control
>2 sec OR Hold program button for more than 2 sec. Blind moves as long as button is pressed
(max. 15 sec.) For moving in opposite direction release button and hold program button again for more than 2 sec. 2.3 Reset
- Reset to factory defaults 1 sec 10 sec Shortly press program button ( <2 sec. ) Program mode:
Hold program button for 10 sec. Blind is stepping... untill blind stops stepping
- Reset to factory defaults & Erase all paired channels/remotes 1 sec 15 sec Shortly press program button ( <2 sec. ) Program mode:
Blind is stepping... Hold program button for 15 sec. untill blind stops stepping and steps once 2.4 Additional blind settings Additional blind settings:
Available Switch rotation direction Favorite position BatteryMode We refer to the manual of the Coulisse Remote control to set the addtional blind settings. Yes Yes Yes Program button 12-24V DC -0.6A input
3. Tips & Troubleshooting Please check www.coulisse.nl for the latest tips and troubleshooting guide Step 2: Set the blind in program-mode by pushing the program button
(also possible by using SingleSelect, see manual remote control*) 1 sec Set to program mode:
Program mode:
Shortly press program button Blind is stepping... Step 3: Pair the blind to a channel/remote Action con rmed:
blind stops stepping for 3 seconds Action con rmed:
blind stops stepping for 3 seconds Choose channel by pressing Pair/unpair by pressing the program button on the the ChannelSelect button backside of the remote Step 4: Switch the rotating direction If you press down and the blind goes up, the rotation direction of the blind has to be switched. Set the blind in program mode and follow this step. Press the up + down button to change the rotation direction
*Manuals are also available on our website www.coulisse.nl Coulisse B.V., Vonderweg 48, 7468 DC Enter, The Netherlands 4. Safety & Cleaning 4.1 Safety WARNING:
Do not make repairs yourself. Do not attempt to open the device or disassemble it. You run the risk of electric shock and voiding the limited warranty. No user-serviceable parts are inside.
- Do not let children play with the blind and/or remote control.
- Only use powersupplies or batteries that comply with the speci cations on the motor.
- In case of malfunction, unplug the device or remove the batteries and contact your dealer.
- Take care that the blind can move freely and is not blocked by objects.
- Take care that the powersupply cable is out of reach for children.
- Do not paint the device.
- Keep the device dry. 4.2 Cleaning Follow these general rules when cleaning the outside of the device and its components:
- Make sure the device is unplugged.
- Use a damp, soft, lint-free cloth. Avoid getting moisture in openings.
- Dont use aerosol sprays, solvents, alcohol, or abrasives. 5. Service & Support WARNING:
Do not make repairs yourself. Do not attempt to open the device or disassemble it. You run the risk of electric shock and voiding the limited warranty. No user-serviceable parts are inside. Online Resources For the latest information and updated manuals go to www.coulisse.nl. Obtaining Warranty Service First follow the advice in this booklet and then go to your local dealer. If the product appears to be damaged or does not function properly, go to your local dealer for instructions on how to obtain warranty service. Disclaimer:
Copyright Coulisse All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, by any means, electronic, mechanical, photocopying, recording, digital or otherwise without the written permission of the publisher. Although this manual has been composed with the most care, Coulisse B.V. does not accept any responsibility for damage due to mistakes and/or faults in this manual. Coulisse B.V. reserves the right to revise the manual and to revise and/or changes its content at any time, without obligation to notify any person or entity of such revisions or changes. The most recent version replaces older versions of this manual. The most recent version is available at ww.coulisse.nl or contact your Coulisse contact person . We invite you to send remarks and comments about this manual to Coulisse at manuals@coulisse.nl. A B C
0 5
U _ R 0 _ G B 1