Assembly Manual AC Tubular motors ABC-06, -07 - MC 1. Assembly 1.1 Compatibility and adapters Motor ABC-06/ABC-07 System:
Roller 42mm Roller 50mm Roller 65mm Roller 80mm Tube:
RTU-42 RTU-50 RTU-65 RTU-80 Drive plug:
RCU-29-ABC RCU-29-ABC RCU-30-ABC RCU-31-ABC Adapter:
no adapters no adapters RCU-13 RCU-14 1.2 Component overview Drive plugs:
RCU-29-ABC RCU-30-ABC RCU-32-ABC RCU-31-ABC RCU-33-ABC Adapters:
RCU-13 Tubes:
RCU-13-ABC RCU-14 RCU-14-ABC RTU-42 RTU-50 RTU-65 RTU-80 1.3 Motor assembly Roller 42/50mm RCU-29-ABC ph1 1.3A 1.3B 1.3C 1.3D 1.3E 1.4 Motor assembly Roller 65/80mm RCU-30/31/32/33-ABC RCU-13/14 ph1 1.4A 1.4B 1.4C 1.4D ph1 1.4E 1.4F 1.4G A B C
0 6 0 7
A _ R 1 _ G B 1 User Manual AC Tubular motors ABC-06, -07 - MC(120) WARNING:
Important safety instructions. Follow all instructions, since incorrect installation can lead to severe injury. WARNING:
Do not make repairs yourself. Do not attempt to open the device or disassemble it. You run the risk of electric shock and voiding the limited warranty. No user-serviceable parts are inside. 3. Position adjustment 1. Upper position Turn the switch upwards and turn the white or red screw until the blind has reached the upper position (select the white or red screw depending on the position of the motor in the blind;
you need to rst test this in order to make the selection). The upper position is now set. 2. Lower position Turn the switch downwards and turn the white or red screw until the blind has reached the lower position (select the white or red screw depending on the position of the motor in the blind;
you need to rst test this in order to make the selection). The lower position is now set. 3. Changing positions:
By turning the red or the white screw to the right (+) or to the left you can respectively enlarge the end position or make it smaller. indoor use only Included adjuster Upper position 1. General information The ABC-06-MC(120), ABC-07-MC(120) are tubular motors to motorize Coulisse Absolute Roller. The tubular motors are compatible with Coulisse tubes and makes it possible to operate your blind motorised with minimum noise. 1.1 General dimensions L2 1 D Type L1 L1 L3 L2 L3 D1 ABC-06/07-MC(120) 475 17 460 40 1.2 Performances Type Power supply Rated power Torq - rpm Max. revolutions Weight
[gram]
ABC-06-MC ABC-07-MC ABC-06-MC(120) ABC-07-MC(120) General 230V AC 50Hz 230V AC 50Hz 120V AC 60Hz 120V AC 60Hz Max. operating time Operating Temp. eriw htgneL 0.53A - 121W 0.53A - 121W 0.85A - 102W 0.89A - 92W 5Nm - 30 rpm 10Nm - 15 rpm 6Nm - 33 rpm 10Nm - 21 rpm 30 30 30 30 1750 1750 1750 1750 4 min. 5 - 60C rtm 2 IP 44 44 44 44 1.3 Compatibility Type Roller
)021(CM-60-CBA ABC-07-MC(120) mm08 ,56 ,05 ,24 42, 50, 65, 80mm Venetian
50mm tilt and lift Other namor roman 2. Connecting diagram
IMPORTANT:
When the mains cable is permanently connected, a readily accessible disconnect device shall be incorporated external to the motor. When there is a pluggable connecter installed on the mains cable, the socket-outlet shall be installed near the motor and shall be easily accessible. Attention:
1. Do not wire two or more motors to one single pole switch or relay. 2. Do not control one motor from several locations without using a proper controller. 3. Do not connect the brown wire and the black wire at the same time to the powersource, this may permanently damage the motor. M T C MS 1 2 M S 2 3 4 1 Mains cable 230V 120V Neutral (1) Direction 1 (2) Direction 2 (3) Ground (4) Blue Brown Black Green/Yellow White Red Black Green White adjuster screw Red adjuster screw Lower position Switch 4. Tips & Troubleshooting Please check www.coulisse.nl for the latest tips and troubleshooting guide 5. Safety & Cleaning WARNING:
Do not make repairs yourself. Do not attempt to open the device or disassemble it. You run the risk of electric shock and voiding the limited warranty. No user-serviceable parts are inside.
- Do not let children play with the blind and/or remote control.
- Only use powersupplies or batteries that comply with the speci
- In case of malfunction, unplug the device or remove the batteries and contact your dealer.
- Take care that the blind can move freely and is not blocked by objects.
- Take care that the powersupply cable is out of reach for children.
- Do not paint the device.
- Keep the device dry. cations on the motor. Follow these general rules when cleaning the outside of the device and its components:
- Make sure the device is unplugged.
- Use a damp, soft, lint-free cloth. Avoid getting moisture in openings.
- Dont use aerosol sprays, solvents, alcohol, or abrasives. 6. Service & Support WARNING:
Do not make repairs yourself. Do not attempt to open the device or disassemble it. You run the risk of electric shock and voiding the limited warranty. No user-serviceable parts are inside. Online Resources For the latest information and updated manuals go to www.coulisse.nl. Obtaining Warranty Service First follow the advice in this booklet and then go to your local dealer. If the product appears to be damaged or does not function properly, go to your local dealer for instructions on how to obtain warranty service. Disclaimer:
Copyright Coulisse All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, by any means, electronic, mechanical, photocopying, recording, digital or otherwise without the written permission of the publisher. Although this manual has been composed with the most care, Coulisse B.V. does not accept any responsibility for damage due to mistakes and/or faults in this manual. Coulisse B.V. reserves the right to revise the manual and to revise and/or changes its content at any time, without obligation to notify any person or entity of such revisions or changes. The most recent version replaces older versions of this manual. The most recent version is available at ww.coulisse.com or cont act your Coulisse contact person . We invite you to send remarks and comments about this manual to Coulisse at manuals@coulisse.com. Coulisse B.V., Vonderweg 48, 7468 DC Enter, The Netherlands A B C
0 6 0 7 M C
U _ R 1 _ G B 1 FCC STATEMENT 1.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause undesired operation. 2.Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.