IER PARED, 7, BHAA, 128ethlien VBE. SOUND SPEAKER Operation Manual VS-573 FCC ID: 2AANZ573 Thank you for purchasing the Portable Bluetooth Speaker. Please read all instructions carefully before using and retain this manual for future use and reference. PACKAGE CONTENTS Portable Bluetooth Speaker USB Charging cable
* AUX cable Instruction Manual SAFETY INSTRUCTIONS Keep the unit away from heat sources, direct sunlight, humidity, water and any other liquids. Do not operate the unit if it has been exposed to water, moisture or any other liquids to prevent against electric shock, explosion and/or injury to yourself and damage to the unit. Do not use the unit if it has been dropped or damaged in any way. Repairs to electrical equipment should only be performed by a qualified electrician. Improper repairs may place the user at serious risk. Do not puncture or harm the exterior surface of the product in any way. Keep the unit free from dust, lint, etc. Do not use this unit for anything other than its intended use or purpose. Doing so may damage the device. This product is not a toy. Keep out of reach of children. Do not use the speaker at excessive levels as this may damage hearing. Do not expose batteries, battery pack, or batteries to installed to excessive heat, such as direct sunlight, or open flame. Speaker Charging 3.5MM Battery cover FEATURES On/Off Power Switch
* Rechargeable Lithium-ion Battery Perfect for use with Bluetooth-enabled devices or 3.5mm devices. AUX IN to connect to external audio devices(iPod
/iPhone/iPad/Smartphones, etc.) SPECIFICATIONS Driver Unit: 76mm Speaker: SW Frequency: 150Hz-20kHz SNR: =80+2cB Power: 3.7V/400mMAh PAIRING THE SPEAKERS 1. Tum the main power switch on the back of speaker to he ON positon. 2. Tum on Bluetooth on your Bluetooth-enabled device. 3. Select VS-573 on your pairing list. CHARGING THE UNIT Place the supplied Rechargeable Lithium-ion into the battery compartment located at the back panel of the speaker. Connect one end of the supplied USB cable to your computer or compatible USB home charger. Do not charge the unit for more than 5 hours as this will shorten he battery life. DO NOT USE THE UNIT WHILE CHARGING. You can use the unit without the battery in the battery compartment, as long as the unit is connected to a compatible USB power source. FCC STATEMENT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC INSTURCTIONS FOR A CLASS B DIGITAL DEVICE OR PERIPHERAL Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuming the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
* Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. WARRANTY INFORMATION The condition of this warranty and our responsibilities under this warranty are as follows:
Supplier's warranty is non-transferable. And this warranty is limited to the original purchaser only.
* You must be able to prove the date of original purchase of the unit with a dated receipt.
* The warranty is not applicable if the product has been subject to physical abuse, improper installation, modification or repair by unauthorized third party.
*The responsibility of supplier's products shall be limited to the repair of replacement of the product as its sole discretion.
* Specifically exempt from any warranty are limitectlife consumable components subject to normal wear and tear such as batteries, decorates and other accessories.
* A supplier will not take any responsibility if the failure of the unit has resulted from accident, abuse, misuse, or any unauthorized repair, modification or disassemble.
* Modification and repair of the unit should be done by authorized and qualified service personnel, Center or returned to the manufacturer.
* This warranty gives you specific legal rights, and you may also have other rights which vary under local laws. The following conditions comprise the requirements and scope of our warranty conditions and do not affect our legal and contractual warranty obligations. We offer a warranty on our products in accordance with the following conditions:
1) Vibe products are covered by a 12 month warranty. We will resolve damages or defects on Vibe products free of charge within 12 months of the purchase date under the following waranty conditions. For any damage or defect determined later than 12 months after the purchase date, proof of a manufacturing fault must be submitted for repair under warranty. 2) The warranty does not cover batteries and other parts, which are considered consumables, parts that break easily such as glass or plastic or defects based on normal wear and tear. There is no warranty obligation in the event of marginal differences compared to the target appearance and workmanship provided these have a negligible effect on the product's fitness for use, in the event of damage caused by chemical or electrochemi-
cal effects, by water or generally from abnormal conditions. 3) The warranty will be performed in such a way that we shall decide whether to repair the defective parts or to replace them with working parts free of charge. Vibe reserves the right to exchange the product for a replacement product of equal value if the product sent in cannot be repaired within a reasonable time or at a reasonable cost. Requests cannot be made for repairs to be caried out on site. Parts that have been replaced or exchanged become our property. 4) The warranty claim does not apply if repairs or other work is carried out by unauthorized persons or if our products are equipped with additional parts or accesso-
ties that are not approved for our product. 5) Warranties that have been activated do not cause the warranty period to be extended, nor do they trigger a new warranty period. The warranty period for any replacement parts installed ends with the waranty period for the entire product. 6) Any other further claims are excluded, especially those for replacement due to damage caused to the outside of the product, provided there is no obligatory legal liability. We therefore accept no liability for accidental, indirect or other consequential damage of any kind, which leads to usage restrictions, data loss, and loss of earnings or interruption to business. Asserting a warranty claim:
1) To make use of the warranty service for hardware issues, you must contact the Vibe Service Center by email at support@dglusa.com 2) Vibe will try to diagnose and solve your problem. If it is determined that a warranty claim exists, you will be given an RMA number (Retum Material Authorization) and will be asked to send the product to Vibe. IMPORTANT: Vibe will only accept parcels that have an RMA number. Please observe the following when sending the product:
1) Send the product suitably packaged with cariage and insurance paid. Do not enclose any accessories with the product (cables, chargers, manuals, etc.) unless the Vibe Service Center specifies otherwise. 2) Mark the RMA number on the outside of the package in such a way that it is visible and clearly legible. 3) You must enclose a copy of the sales slip as proof of purchase. 4) Once Vibe has received the product, it will meet its warranty obligations in accordance with the warranty conditions and will return the product to the sender with carriage and insurance paid. Service outside of warranty Vibe can refuse any service claim made that is not covered by the warranty. If Vibe agrees to provide a service outside the warranty, the customer will be invoiced for all repair and