FCC ID: YZZGWN7615 802.11ac Wave-2 3x3/3 Enterprise Wi-Fi Access Point

Grandstream Networks, Inc. 126 Brookline Ave., 3rd Floor Boston, MA 02215. USA Tel : +1 (617) 566 - 9300 Fax: +1 (617) 249 - 1987 www.grandstream.com In all EU member states, operation of 5150

- 5350 MHz is restricted to indoor use only. 802.11ac Wave-2 33:3 Wi-Fi GWN7615 Access Point For Warranty and RMA information, please visit www.grandstream.com Quick Installation Guide EN OVERVIEW The GWN7615 is a good-performance 802.11ac Wave-2 Wi-Fi access point for small to medium sized businesses, multiple floor offices, com-

mercial locations and branch offices. It offers dual-band 33:3 MU-MI-

MO technology and a sophisticated antenna design for maximum net-

work throughput and expanded Wi-Fi coverage range. To ensure easy installation and management, the GWN7615 uses a controller-less distributed network management design in which the controller is em-

bedded within the products web user interface. The GWN7615 is also supported by GWN.Cloud and GWN Manager, Grandstreams cloud and on-premise Wi-Fi management platforms. It is the ideal Wi-Fi AP for voice-over-Wi-Fi deployments and offers a seamless connection with Grandstreams Wi-Fi-capable IP phones. With support for advanced QoS, low-latency real-time applications, mesh networks, captive por-

tals, 200+ concurrent clients per AP and dual Gigabit network ports with PoE/PoE+, the GWN7615 is an ideal Wi-Fi access point for me-

dium wireless network deployments with medium to-high user density. PRECAUTIONS Do not attempt to open, disassemble, or modify the device. Do not expose this device to temperatures outside range of -10 C to 60 C for storage and 0 C to 40 C for operating. Do not expose the GWN7615 to environments outside of the follow-

ing humidity range: 10-90% RH (non-condensing). Do not use the GWN7615 in outdoor environment. Do not power cycle your GWN7615 during system boot up or firm-

ware upgrade. You may corrupt firmware images and cause the unit to malfunction. PACKAGE CONTENTS 1GWN7615 Access Point 1Mounting Bracket 1Ceiling Mounting Bracket 3Screw

(PM 350) 3 Screw

(PA 3.520)

~1~

3Plastic Expansion Bolt 3M3 NUT 1Quick Installation Guide GWN7615 PORTS Port NET/POE NET RESET Description Ethernet RJ45 port (10/100/1000Mbps) supporting PoE/PoE+. Ethernet RJ45 port (10/100/1000Mbps) to your router or another GWN76xx. Factory reset button. Press for 7 seconds to reset factory default settings. POWERING AND CONNECTING THE GWN7615 GWN7615 can be powered on using PoE/PoE+ switch using following steps:

Step 1: Plug a RJ45 Ethernet cable into the network port of GWN7615. Step 2: Plug the other end into the uplink port of the power over Ethernet

(PoE/PoE+) switch. Network Port RJ45 Ethernet Cable to power over Ethernet

(PoE/PoE+) Switch HARDWARE INSTALLATION GWN7615 can be mounted on the wall or ceiling, Please refer to the following steps for the appropriate installation.

~2~

Wall Mount 1. Connect the Ethernet cable (RJ45) to the correct ports of your GWN7615. 2. Align the arrow on the GWN7615AP with the arrow on the locking tab of the mounting bracket and ensure that your GWN is firmly seated on the mounting bracket. 3. Turn the GWN clockwise until it locks into place and fits the locking tab. Wall Wall 1 2 PA3.5 x 20 Screw PA3.5x20 Screw Plastic Expansion Bolt Plastic Expansion Bolt 3 4. Connect the power cable and the ethernet cable (RJ45) to the cor-

rect ports of your GWN7615. 5. Align the arrow on the GWN7615AP with the arrow on the locking tab of the mounting bracket and ensure that your GWN is firmly seated on the mounting bracket. 6. Turn the GWN clockwise until it locks into place and fits the locking tab. 4 Ceiling Mount Note: Ceiling mounting performance. 1. Remove the ceiling tile. is recommended for optimal coverage 2. Place the ceiling backing plate in the center of the ceiling tile and mark the mounting screw holes (screw holes DIA 5.5mm, reticle hole DIA 25mm). M3 nut Ceiling Mounting 3. Insert the screws through the mounting bracket. 1 GWN7615. tab of the mounting bracket and ensure that your GWN is firmly seated on the mounting bracket and connect the network and power cables. 5. Align the arrow on the GWN7615AP with the arrow on the locking 4. Connect the Ethernet cable (RJ45) to the correct ports of your M3.0x50 screw 2 3 6. Turn the GWN clockwise until it locks into place and fits the locking tab. 4 5

~3~

6 6 5

~4~

Model: GWN7615 Input: 48V 0.5A POE WiFi CAN ICES-3(B)/NMB-3(B) IC: 11964A-GWN7615 FCC ID: YZZGWN7615 Method1: Discover the GWN76XX using its MAC address 1. Locate the MAC address on the MAC tag of the unit, which is on the underside of the device, or on the package. 2. From a computer connected to same Network as the GWN76XX , type in the following address using the GWN76XXs MAC address on your browser https://gwn_<mac>.local For example, if a GWN76XX has the MAC address 00:0B:82:8B:58:30, this unit can be accessed by typing https://gwn_000b828b5830.local/ on the browser. Figure 21: Discover the GWN76XX using its MAC Address Method 2: Discover the GWN76XX using GWN Discovery Tool 1. Download and install GWN Discovery Tool from the following link:

http://www.grandstream.com/support/tools 2. Open the GWNDiscoveryTool, click on Select to define the network interface, then click on Scan. GWN76XX User Manual Version 1.0.11.10 P a g e | 39 3. The tool will discover all GWN76XX Access Points connected on the network showing their MAC, IP addresses and firmware version. 4. Click on Manage Device to be redirected directly to the GWN76XXs configuration interface, or type in manually the displayed IP address on your browser. Figure 22: GWN Discovery Tool Use the Web GUI and use the Web Interface. Access Web GUI Chrome and etc. Users can access then the GWN76XX using its WebGUI, the following sections will explain how to access The GWN76XX embedded Web server responds to HTTPS GET/POST requests. Embedded HTML pages allow users to configure the device through a Web browser such as Microsoft IE, Mozilla Firefox, Google GWN76XX User Manual Version 1.0.11.10 P a g e | 40 Forcertificationinformation,pleaserefertoUserManuals:

http://www.grandstream.com Common part This equipment complies with radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. U.S. FCC Part 15 Regulatory Information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. EU Regulatory Information Support Frequency Bands and Power:

WLAN 2.4 GHz < 20 dBm;

WLAN 5150-5250 MHz < 23 dBm;

WLAN 5250-5350 MHz < 20 dBm;

WLAN 5470-5725 MHz < 27 dBm;

The simplified EU declaration of conformity referred to in Article 10(9) shall be provided as follows:

Hereby, [Grandstream Networks, Inc.] declares that the radio equipment type [GWN7615] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:

www.grandstream.com Canada Regulatory Information Radio equipment Operation of 5150-5250 MHz is restricted to indoor use only. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions 2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est suivantes :

1) Lappareil ne doit pas produire de brouillage;

susceptible den compromettre le fonctionnement. CAN ICES-3 (B)/NMB-3(B)

V1.0 V2.0 20200108 20200225 59.8 mm 5 Model: GWN7615 Input: 48V 0.5A POE m m 9 1 3

. CAN ICES-3(B)/NMB-3(B) IC: 11964A-GWN7615 FCC ID: YZZGWN7615 WiFi R1.0 SSID:GWN+MAC PN()USW, 1. 59.8*31.9mmR=1mmC=5mm0.10.05mm 2. 0.2mm 3. 7090%

-258 4. C85 M31 Y83 K20 LOGO Pantone Black 7C 5. FCC 282-00730-00A-02 V2.0 1:1 1/1 20200108 20200108 20200108

[Grandstream Networks, Inc.]

[March 24, 2020]

Attention: Application Examiner RE: Request for Confidentiality Applicant: [Grandstream Networks, Inc.]

FCC ID: [YZZGWN7615]

To Whom It May Concern:

Permanent Confidentiality [Complete this section if permanent confidentiality is requested]

Request is hereby submitted by [ Grandstream Networks, Inc. ] to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential:

Schematics Detailed Block Diagrams Detailed Operational/Functional Description Rationale for request for confidentiality:

[Grandstream Networks, Inc. ] has invested considerable time and materials in research and development to produce the referenced product. [ Permanent confidentiality: Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us.] [ Short term confidentiality: Disclosure of the short-term confidential portions of this application during the period of importation and/or distribution would reveal key aspects of proprietary technology to competitors and diminish the value of our investment in research and development.]

If you have questions or need further information, please contact the undersigned. Sincerely,

[Signature]

[Ning Wei]

[Manager]

[Grandstream Networks, Inc.]

1(1)

Authority to Act as Agent Limited Agency Agreement

(Grandstream Networks, Inc.) Date: June 14, 2019 Federal Communications Commission 445 12th Street SW Washington, DC 20554 Subject:

To Whom It May Concern:

Shenzhen UnionTrust Quality and Technology Co., Ltd. is authorized to act on our behalf, until otherwise notified, for applications to Intertek Testing Services. We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date:

By:

Title:

On behalf of: Grandstream Networks, Inc. Telephone: 1-617-5669300 __________________________

(Print name) Manager Ning Wei

(Signature1) 12 months

Grandstream Networks, Inc. 126 Brookline Ave, 3rd Floor Boston, MA 02215, USA 126 Brookline Ave, 3rd Floor Boston, MA 02215, USA Tel: 1-617-5669300 Fax: 1-617-2491987 Email: Nwei@grandstream.com Date: 2020/4/7 FEDERAL COMMUNICATIONS COMMISSIONS FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: FCC Class II Permission change for FCC ID:

Subject: FCC Class II Permission change for FCC ID: YZZGWN7615 Original Grant Date: 2020/4/1 Dear Sir/Madam, This is to req uest a Class II permission change to our product name:

uest a Class II permission change to our product name:

Enterprise Wi-Fi Access Point; Model: GWN76

(FCC ID: YZZGWN7615), the device is identical to the prev Changes as below for details;

1) Adding DFS bands by firmware, no any other hardware change or 2) Adding test for the frequency bands This authorization is valid until further written notice from the applicant. This authorization is valid until further written notice from the applicant. Please contact me if you have any questions or need future information regarding this any questions or need future information regarding this Sincerely Yours, s: 5250-5350 MHz and 5470-5725 MHz. device is identical to the previously certified except for the GWN7615

, no any other hardware change or modification to the device. to the device. 802.11ac Wave-2 33:3 2 33:3 Signature:

Ning Wei Manager