DashcamG2 User Manul A Regulatory Information A Regulatory Information A Regulatory Information A Regulatory Information This equipment has been tested and found to FCC Information Please take attention that changes or modication not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC compliance:
comply with the limits for a Class B digital device , pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body. FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the RE Directive 2014/53/EU, the EMC Directive 2014/30/EU, the LVD Directive 2014/35/EU, the RoHS Directive 2011/65/EU 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www. recyclethis.info The power supply must conform to LPS. The recommended adaptor model is C10, whose manufacturer is Dongguan NB Power Electronic Limited. Use this kind of adaptor, and do not change the adaptor randomly. Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformment la rglementation d'Industrie Canada, le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. Operation distance statement for Camera This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body. Cet quipement doit tre install et utilis une distance minimale de 20 cm entre le radiateur et votre corps. B Packing List 1. Dashcam x 1 2. Katallobar x 1 3. BT remote control x 1 4. TVI Camoptional x 1 5. Static lm x 2 6. User manul x 1 7. 3M glue x 2 4 6 C Part Specication 1. TF Slot Insert the TF slot and start the video. 2. RESET Reset the device 3. Stop monitoring indicator light Device in stop monitoring mode 4. Cam lens 5. MINI USB Connector Connect 4G module 6. Micro USB Connector Power connector 7. TVI Camera Connector 8. MIC 9. Power/Status indicator light 10. Audio output 1 2 3 5 7 D Installation instruction 1 2 Clean the windscreen and stick the static lm on the windscreen,make sure no bubble. Disater box Stick the device on the static lm and get power from the disater box. 3 4 for device Micro USB VCC ACC GND Connect the katallobar as aboved label. Adjust the angle of the lens for your view. 1 2 3 4 5 6 7 8 9 10 Scan and download the APP 1 2 3 4 5 6 7 F Basic operation F Basic operation F Basic Operation G Preventions and Cautionary Tips H Trouble Shooting H Trouble Shooting E Mobile Phone Connection 1 Scan the QR code to download the HikDashcam app.
<
2 Add the dashcam in app by connecting to its Wi-Fi. Step 1 .Run the HikDashcam app. Step 2 .In Wi-Fi list, select the Wi-Fi name of target dashcam and enter WiFi password to build connection. 3 Dashcam Wi-Fi default parameters:
Wi-Fi name: HIKVISION-XXXX (XXXX refers to the last four characters of verication code.) Wi-Fi password: 1234567890 Power on Connector the katallobar with car battery,once start the car, device will start the video automatically. When the car is o,device will turn into Parking Monitoring mode and start to record once the current scene changed or collision happened. BT remote control You can start recording and capturing via Bluetooth remote control, an optional accessory. Step Press the capture button to capture a picture. If you has enabled the Linkage Recording function in mobile app, a 12-second video of 6 seconds before and 6 seconds after the capture will be saved Try to install BT module avoid the airbags for your safety 8 9 Power on the device and into preview interface. change the chanel by slide left/right(if with second camera). Slide down the main interface.we have shortcut key to turn on/o Wi-Fi,BT,GPS,Speaker,Recording Click the screen and slide left,we can go into the main menu Recording The voice recording can set on or o during the video and we have 3 ways to realize Option1:Through BT remote module to turn on/o the voice recording. Option:Enter into System setting-video parameter-voice in recording. Option3:By Hikdashcam APP. Setting the calibration line Please adjust the calibration line after your rst power on to improve the veracity of ADAS Step1: Parking the car in a open eld Step2: Slide right the screen and open the calibration interface Step3:Adjust the angle of the lens,make the calibration line coincide with the the horizon line Calibration line 10 Slide left the screen and enter into main menu,choose System setting to adjust the device parameter. Option1Through Hikdashcam APP Update Step1Power on the device and open Wi-Fi to connect the APP. Step2Check the latest SW version in the APP. Step3Choose System setting-SW update. Step4Once rmware updated,device will restart ,then we nished. Option2Compatible with 4G module and detect the latest SW version,can also support download and update (Need compatible with 4G module). Dont power o during the upgrade ADAS Choose ADAS,can turn on several intelligent auxiliary driving functions, and the veracity will improved continuously by SW update Other Parameters System Setting->About device,check the device and SW version Video recordingcan set dierent resolution Image ParameterCan on/o WDR/Distortion Correction, suggest to open WDR when the backlight Format SD cardclear the data in the card G-sensorturn on,Device will make a emergent video once the car have emergency brake or turn 11 Aautions for TF cards For the stability and eciency of data storage, Please purchase TF cards from ocal channels. It is recommended to use TF cards with Class 10 or more than 16G high speed TF card. Before pulling out the TF card, please make sure that the equipment is powered o, so as not to damage the TF card. It is recommended to format the TF card once a month. Please replace the TF card regularly to avoid the TF card exceeding its service life and unable to store data. Trouble The dashcam drops easily. Starting dashcam failed. The dashcam powers o frequently. Aautions for Capacitor Use Recording is abnormal and recording indicator is unlit. Super capacitors are built in the equipment. Please do not disassemble or ret the equipment capacitors to avoid capacitor damage. Do not discard capacitors or use them in other devices at will. Do not use damaged power supply. Recorded videos are fuzzy. Clean the glass before installation. Ensure the automobile started normallyand the power supply is normal. If no indicator is lighting, reconnect the cigarette lighter. Ensure the power cord is well. Ensure the connection between dashcam and power cord is well. Ensure the dashcam started normally. Ensure TF card is installed. Check TF card status, e.g., itsformat and lifespan. If it is not well,replace it with a good one. Tear o the proof lm on lens. Clean the lens and glass. Do not place capacitors in high temperature or near re , otherwise capacitors will easily explode. Abnormal phenomena such as deformation, excessive temperature and odor are found during the use of capacitors. Please stop using, so as to avoid safety problems. Audio is not recorded with video. Enable "Tape When Recording" in app. Connecting the dashcam via app failed. Ensure the app is well installed. Restart the app and dashcam. Solution Trouble Solution Playing video via app failed. Failed to detect the TF card when connecting the dashcam and your computer with the power cord. It takes a long time to connect the dashcam WiFi. The trouble may be relevant with the mobile phone player or system.Insert TF card into your computer to play the videos. TF card on the computer to read requires a dedicated player. The dashcam does not support data transmission. And the power cord is only for charging. If you need to transfer data, take out the TF and connect it to your computer. It may be caused by the interference of the surrounding Wi-Fi signals. You can operate the dashcam in an environment with less interference. Close unnecessary programs in your mobile phone to release some resources for the dashcam app.