DashcamUser ManualUD07295BDownload App(iOS User)Download App(Android User) A Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device , pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body. 1 A Regulatory Information FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the RE Directive 2014/53/EU, the EMC Directive 2014/30/EU, the LVD Directive 2014/35/EU, the RoHS Directive 2011/65/EU 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www. recyclethis.info 2 A Regulatory Information The power supply must conform to LPS. The recommended adaptor model is C10, whose manufacturer is Dongguan NB Power Electronic Limited. Use this kind of adaptor, and do not change the adaptor randomly. Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce 3 A Regulatory Information potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformment la rglementation d'Industrie Canada, le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body. Cet quipement doit tre install et utilis une distance minimale de 20 cm entre le radiateur et votre corps. 4 B Packing List Camera 1 Suction Cup Bracket 1 Cigarette Lighter 1 User Manual 1 Power Cord 1 The suction cup bracket with GPS module is optional. The wireless remote control is optional. 5 C Camera Description Front View Bracket Connector Loudspeaker Lens Rear View Micro SD Card Slot Status Indicator MIC Reset Button 6 D Installation Rotate clockwise to lock. Insert downwards Route the power cord along the red line. 7 E Status Indicator Recording indicator Solid red: dashcam is recording the event video. Solid blue: dashcam is recording the continuous video. Wi-Fi indicator Solid blue: Wi-Fi is turned on and waiting to be connected. Blinking blue: a mobile app has connected the Wi-Fi. Taping indicator Solid blue: taping when recording. Unlit: recording without taping. Reset button Press it to reboot dashcam. To restore factory defaults, press down and hold it till the dashcam sends out the startup sound. 8 F Mobile Phone Connection Scan the QR code to download the HikDashcam app.
< Scan QR Code For iOS User For Android User Add the dashcam in app by connecting with its Wi-Fi. 1. Run the HikDashcam app. 2. In Wi-Fi list, select the Wi-Fi name of target dashcam and enter Wi-Fi password to build connection. Dashcam Wi-Fi default parameters:
Wi-Fi name: HIKVISION-XXXX (XXXX refers to the last four characters of verification code.) Wi-Fi password: 1234567890 9 G Operation Power on and Power off 1. Insert the cigarette lighter into the receptacle in automobile. 2. The dashcam powers on once the automobile starts up and powers off once the automobile flameouts. Note After powered off, the dashcam will keep working for a period before shutdown. The period can be set in app. For automobiles with constant electric power supply, pull the cigarette lighter out of the receptacle to power off dashcam. Recording Two recording types are provided: taping when recording (default type) and recording. You can switch type in app or via wireless remote control. 10 H Preventions and Cautionary Tips Tips for Dashcam Operate the dashcam in accordance with the local regulations and laws. Save the user manual properly for future reference. To ensure data is safe and stable, install a micro SD card bought from formal channel. It is recommended to use a high-speed micro SD card of class 10 and above. To protect micro SD card from damage, shut down the dashcam before installing and uninstalling micro SD card. In case the dashcam is directly connected with the automobile power system, you are recommended to power off the dashcam when the automobile is off. Working temperature: [-10 C, +70 C] ([14 F, 158 F]). To protect the dashcam, do not use it in high-humidity and high-dust density environment and keep all liquids away from it. The manual is subject to dashcam update. 11 I Trouble Shooting Trouble Solution The dashcam drops easily. Clean the glass before installation. Starting dashcam failed. The dashcam powers off frequently. Recording is abnormal and recording indicator is unlit. Tear off the dust-proof film on suction cup before installation. After using for a period, you can soft and clean the suction cup with hot water. Ensure the automobile started normally. If no indicator is lighting, reconnect the cigarette lighter. Restore dashcam to factory defaults. Ensure the power cord is well. Ensure the connection between dashcam and power cord is well. Ensure the dashcam started normally. Ensure micro SD card is installed. Check micro SD card status, e.g., its format and lifespan. If it is not well, replace it with a good one. Recorded videos are fuzzy. Tear off the proof film on lens. Audio is not recorded with video. Clean the lens and glass. Enable "Tape When Recording" in app. 12 I Trouble Shooting Trouble Solution Connecting the dashcam via app failed. Playing video via app failed. The trouble may be relevant with Ensure the app is well installed. Restart the app and dashcam. Failed to detect the micro SD card when connecting the dashcam and your computer with the power cord. It takes a long time to connect the dashcam Wi-
Fi. Dashcam Wi-Fi password is forgotten. the mobile phone player or system. Insert the micro SD card into your computer and play the videos. The dashcam does not support data transmission. And the power cord is only for charging. If you need to transfer data, take out the SD card and connect it to your computer. It may be caused by the interference of the surrounding Wi-Fi signals. You can operate the dashcam in an environment with less interference. Close unnecessary programs in your mobile phone to release some resources for the dashcam app. Restore dashcam to factory defaults
(default password 1234567890). And then reconnect the dashcam. 13