FCC ID: 2ADTD-DS-D60CB Digital Signage Player

FocSign Lite Client User Manual FocSign Lite Client User Manual i FocSign Lite Client User Manual 2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. This Manual is the property of Hangzhou Hikvision Digital Technology Co., Ltd. or its affiliates (hereinafter referred to as "Hikvision"), and it cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of Hikvision. Unless otherwise expressly stated herein, Hikvision does not make any warranties, guarantees or representations, express or implied, regarding to the Manual, any information contained herein. About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website (https://www.hikvision.com/). Please use this Manual with the guidance and assistance of professionals trained in supporting the Product. Trademarks Acknowledgement Other trademarks and logos mentioned are the properties of their respective owners. and other Hikvisions trademarks and logos are the properties of Hikvision in various jurisdictions. IMPLIED, LEGAL DISCLAIMER TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED AS IS AND WITH ALL FAULTS AND ERRORS. HIKVISION MAKES NO WARRANTIES, EXPRESS OR INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS;

HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS. i FocSign Lite Client User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, the LVD Directive 2014/35/EU, the RoHS Directive 2011/65/EU. 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see:

www.recyclethis.info The power source should meet limited power source or PS2 requirements according to IEC 62368-1. Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements. ii FocSign Lite Client User Manual Applicable Models This manual is applicable to FocSign Lite. Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Provides additional information to emphasize or supplement important points of the main text. Indicates a potentially hazardous situation, which if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results. Indicates a hazard with a high level of risk, which if not avoided, will result in death or serious injury. iii FocSign Lite Client User Manual TABLE OF CONTENTS Chapter 1 Product Introduction...................................................................................................................................................... 1 1.1 Introduction ...............................................................................................................................................................................1 1.2 Operation Flowchart ..................................................................................................................................................................1 Chapter 2 Registration and Login ................................................................................................................................................... 2 2.1 Registration ................................................................................................................................................................................2 2.2 Login ..........................................................................................................................................................................................2 Chapter 3 Terminal Management ................................................................................................................................................... 4 3.1 Add Terminal ..............................................................................................................................................................................4 3.1.1 Add Terminal on the Same Network Segment ................................................................................................................4 3.1.2 Add Terminal by IP Address .............................................................................................................................................6 3.1.3 Add Terminal by Serial No. .............................................................................................................................................6 3.1.4 Edit/Delete Terminal .......................................................................................................................................................7 3.1.5 View Terminal Details .....................................................................................................................................................8 3.2 Terminal Operation ....................................................................................................................................................................8 3.2.1 Startup and Shutdown ....................................................................................................................................................8 3.2.2 Play Control .....................................................................................................................................................................8 3.2.3 Adjust Brightness ............................................................................................................................................................9 3.2.4 Adjust Volume .................................................................................................................................................................9 3.3 Terminal Configuration ..............................................................................................................................................................9 3.3.1 Modify Terminal Password ..............................................................................................................................................9 3.3.2 Configure Time Zone.....................................................................................................................................................10 3.3.3 Configure Logo ..............................................................................................................................................................10 3.3.4 Configure IP Channel Linkage ........................................................................................................................................10 3.4 Terminal Maintenance .............................................................................................................................................................11 3.4.1 Upgrade.........................................................................................................................................................................11 3.4.2 Security .........................................................................................................................................................................12 3.4.3 Time Synchronization ...................................................................................................................................................12 3.4.4 Modify Network Parameters .........................................................................................................................................12 3.4.5 Reset Password .............................................................................................................................................................13 3.4.6 Restore Defaults ............................................................................................................................................................14 3.4.7 Bring Device Back Online ..............................................................................................................................................14 3.4.8 Change Universal Authentication Code .........................................................................................................................14 3.4.9 Device Exception Prompt ..............................................................................................................................................14 Chapter 4 Program Management ................................................................................................................................................. 15 4.1 Create Program ........................................................................................................................................................................15 4.1.1 Configure Program Basic Settings .................................................................................................................................15 4.1.2 Manage Page ................................................................................................................................................................16 4.1.3 Add Window ................................................................................................................................................................. 17 4.1.4 Edit Page .......................................................................................................................................................................23 4.2 Schedule Program ....................................................................................................................................................................23 4.2.1 Create Schedule ............................................................................................................................................................23 iv FocSign Lite Client User Manual 4.2.2 Create Loop Schedule ...................................................................................................................................................24 4.3 Release .....................................................................................................................................................................................25 4.3.1 Release Program ...........................................................................................................................................................25 4.3.2 Cut-in Release ...............................................................................................................................................................26 4.3.3 Release Default Video ................................................................................................................................................... 27 4.3.4 Relevant Operations of Release .................................................................................................................................... 27 Chapter 5 System Management ................................................................................................................................................... 28 5.1 Space Management .................................................................................................................................................................28 5.2 Account Setting ........................................................................................................................................................................28 5.3 Client Locking ...........................................................................................................................................................................28 5.4 System Information ..................................................................................................................................................................28 v FocSign Lite Client User Manual Chapter 1 Product Introduction 1.1 Introduction FocSign Lite client (hereinafter referred to as the client) is used to create programs and release them to information release screen or digital signage (hereinafter they are referred to as the terminal). The client supports program creation, release management, broadcast schedule management, cut-in, terminal management, etc. 1.2 Operation Flowchart Figure 1-1 Operation Flowchart 1 FocSign Lite Client User Manual Chapter 2 Registration and Login 2.1 Registration Purpose:

Registration is required for the first login. Before you start:

Install the client on your computer. Step 1 Run the client. Step 2 Set the password and confirm it. One client has only one user: admin. Step 3 Click Register. You will enter the interface of Port Settings. Click OK if the message which requires you to disable the firewall appears. Step 4 Select the desired NIC, and configure the IP address and port number. You can select the desired network card for registration when there are multiple choices. If the IP address of the selected network card changes, you will be prompted to change the IP address. If the client is not in the same subnet with the terminal, you need to enable port mapping and configure related parameters. Step 5 Click OK and return to the login interface. Step 6 Optionally, check Remember Password and Auto Login according to needs. 2.2 Login Purpose:

2 FocSign Lite Client User Manual Enter the password and click Login. You can manage and release program to the terminal after logging in. Figure 2-1 Log In Click on the home page to edit login password or enable/disable auto login. 3 FocSign Lite Client User Manual Chapter 3 Terminal Management 3.1 Add Terminal Purpose:

You can manage added terminals, including start up/shut down terminals, adjust terminal volume and brightness, etc. You can add terminal via the following methods:

Add terminals from the Online Terminal bar if the client and the terminals are in the same network segment. Add terminals by IP address. Add terminals by serial number. 3.1.1 Add Terminal on the Same Network Segment Activate Terminal Purpose:

You can activate the terminal via client. Before you start:

Ensure the terminal is on and is in the same network segment with the client. Step 1 Go to Terminal Management. Step 2 Click on the lower-right corner. Step 3 Select the terminals to activate. Step 4 Click Activate. 4 FocSign Lite Client User Manual Step 5 Set the terminal password and confirm password. Figure 3-1 Activate Terminal Step 6 Click OK. Register Terminal Purpose:

You can register activated terminal to the client. Before you start:

Ensure the terminal and the client are in the same network segment. Step 1 Go to Terminal Management. Step 2 Click on the lower-right corner. Step 3 Select the terminals to register. Step 4 Click CMS Registration. Figure 3-2 CMS Registration 5 FocSign Lite Client User Manual Step 5 Set IP type, IP address, and server port. Step 6 Enter terminal password. Step 7 Click OK. Step 8 Optionally, click Acquire Registration Status to view terminal registration status. 3.1.2 Add Terminal by IP Address Step 1 Go to Terminal Management. Step 2 Click Add Terminal. Figure 3-2 Add Terminal Step 3 Select Adding Mode as Add by IP. Step 4 Enter Terminal IP Address and Port. Step 5 Enter Terminal Name and Terminal Password. Step 6 Click OK. 3.1.3 Add Terminal by Serial No. Before you start Get the Serial No. of the terminal in system settings on the device. Step 1 Click Terminal Management. Step 2 Click Add Terminal. Step 3 Select Adding Mode. 6 FocSign Lite Client User Manual Step 4 Enter Terminal Name, Terminal Serial No. , Authentication Code, and Description. Figure 3-3 Add Terminal by Serial No. Step 5 Click OK. Step 6 Register the terminal to be added. 1) Open the information release software in the terminal. 2) Double click upper-right corner. 3) Enter the terminal name and information of server. 4) Click Next. 5) Enter the authorization code set in Step 4. 6) Click OK. 3.1.4 Edit/Delete Terminal Purpose:

You can edit information of the added terminal or delete the added terminal. Click Check a terminal and click Delete Terminal to delete it. of a terminal to edit its name, serial No. or description. Figure 3-4 Edit/Delete Terminal 7 FocSign Lite Client User Manual 3.1.5 View Terminal Details Click of a terminal to view its information and current program image. 3.2 Terminal Operation Purpose:

You can start up/shut down terminal, adjust terminal volume, and control program via terminal operation menu. 3.2.1 Startup and Shutdown Purpose:

You can manually start up and shut down a terminal, and configure the startup/shutdown schedule for a terminal.

: Start up the selected terminal.

: Shut down the selected terminal.

: Reboot the selected terminal. Scheduled Startup/Shutdown: Select a terminal, enable Scheduled Startup/Shutdown and click Settings to set startup/shutdown schedule. The terminal automatically starts up and shuts down according to the schedule. 3.2.2 Play Control Purpose:

You can control program playback, cut-in, and default play for one or more terminals. Play/Stop A program is playing: Click Play to start playing program from the beginning. And click Stop to stop playing. No program is playing: Click Play to start playing the previous program from the beginning. Cut-in The priority of a terminal is to play received cut-in programs. Click Stop to stop playing cut-in programs. Default play If you enable Default Play, terminal will start default play when no program or cut-in is playing. 8 FocSign Lite Client User Manual 3.2.3 Adjust Brightness Purpose:

You can adjust the brightness for one or more terminals. Auto-Brightness Select Auto-Brightness radio and select backlight value. Terminal will automatically adjust screen backlight according to environment. Backlight Select Backlight radio and drag the slider to adjust brightness value. 3.2.4 Adjust Volume Purpose:

You can adjust the volume for one or more terminals. Output Volume Drag the slider to adjust the terminal output volume. Scheduled Volume Select a terminal, enable Scheduled Volume and click Settings to set volume schedule. The terminal volume varies according to schedule. 3.3 Terminal Configuration 3.3.1 Modify Terminal Password Purpose:

To increase terminal security, you are recommended to modify terminal password regularly. Step 1 Go to Terminal Management. Step 2 Select the desired terminal and click Remote Settings. Step 3 Go to Terminal Operation > Password Settings. Step 4 Enter Current Password and enter the same password in New Password and Confirm New Password. We highly recommend you create a strong password of your own choosing (Using a minimum of 8 characters, including at least three of the following categories: upper case letters, lower case letters, numbers, and special characters.) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product. 9 FocSign Lite Client User Manual Step 5 Click Apply. 3.3.2 Configure Time Zone Purpose:

Configure terminal time zone according to the actuality. Step 1 Go to Terminal Management. Step 2 Select the desired terminal and click Remote Settings. Step 3 Go to Terminal Operation > Time Zone Settings. Step 4 Select time zone. Step 5 Click Apply. 3.3.3 Configure Logo Purpose:

Enable/disable the startup logo of terminals. Step 1 Go to Terminal Management. Step 2 Select the desired terminal and click Remote Settings. Step 3 Go to Terminal Operation > Logo Settings. Step 4 Check/uncheck Enable Logo. Step 5 Click Apply. 3.3.4 Configure IP Channel Linkage Purpose:

Link the terminal with network cameras to receive information from network cameras. Up to 8 network cameras can be added. Step 1 Go to Terminal Management. Step 2 Select the desired terminal and click Remote Settings. Step 3 Go to Terminal Linkage > Channel Parameter Settings. 10 FocSign Lite Client User Manual Figure 3-5 Configure Channel Parameters Step 4 Select a channel and click

. Step 5 Enter network camera parameters. Step 6 Click Apply to link to the network camera. Step 7 Optionally, click

to link the network camera to the other channel. 3.4 Terminal Maintenance 3.4.1 Upgrade Purpose:

You are recommended to upgrade the terminal with the help of professional technical support. Before you start Save the upgrade file in your computer local path. Step 1 Go to Terminal Management. Step 2 Click Upgrade. Step 3 Click and select the upgrade file path. Step 4 Click OK to start upgrade. 11 FocSign Lite Client User Manual It takes 1 to 10 minutes to upgrade the terminal. Do not cut off power supply during upgrade. The terminal will restart after upgrade. 3.4.2 Security Purpose:

To increase security, you are recommended to turn off SADP after server configuration. Operate the function with the help of professional technical support. Step 1 Go to Terminal Management. Step 2 Select the desired terminal and click Remote Settings. Step 3 Go to Security Settings. Step 4 Check/uncheck Enable SADP as your desire. Step 5 Click Apply. 3.4.3 Time Synchronization Purpose:

Synchronize the terminal time. Step 1 Go to Terminal Management. Step 2 Select the desired terminal and click Remote Settings. Step 3 Go to Sync Time Settings. Step 4 You can customize the time or synchronize the time with your computer. Click Check Use Local Time to set terminal time as your computer time. to set time as your desire. Step 5 Click Apply. 3.4.4 Modify Network Parameters Before you start Ensure the terminal and your computer are in the same network segment. Step 1 Go to Terminal Management. Step 2 Click on the lower-right corner to view online terminals. Step 3 Select the desired terminal and click Edit Network Parameters. 12 FocSign Lite Client User Manual Figure 3-6 Edit Network Parameters Step 4 Edit network parameters. Step 5 Enter Terminal Password and click Confirm. 3.4.5 Reset Password Before you start Ensure the terminal and your computer are in the same network segment. Step 1 Go to Terminal Management. Step 2 Click on the lower-right corner to view online terminals. Step 3 Select the desired terminal and click Reset Password. Step 4 Enter Password and Confirm Password. Figure 3-7 Reset Password 13 FocSign Lite Client User Manual Step 5 Click Confirm. Step 6 Click Export to export terminal configuration file. Step 7 Click Import to import a configuration file. You are recommended to import configuration file with the help of professional technical support. 3.4.6 Restore Defaults Purpose:

If the terminal is abnormal, you can restore it to default settings. Step 1 Go to Terminal Management. Step 2 Click Restore of Terminal Default Parameters. 3.4.7 Bring Device Back Online Purpose:

If the terminal is offline due to the change of IP address and port number, you can get it back online by entering the device password. Step 1 Go to Terminal Management. Step 2 Select the offline device, and click Back Online. Step 3 Enter the device password. Step 4 Click OK. 3.4.8 Change Universal Authentication Code Purpose:

Change the universal authentication code for all terminals. Step 1 Go to Terminal Management. Step 2 Click Universal Authentication Code. Step 3 Enter the desired code. Step 4 Click OK. 3.4.9 Device Exception Prompt Purpose:

A prompt will be displayed if a camera is in abnormal status. Step 1 Go to Terminal Management. Step 2 Click Abnormal in Camera Status to check the details. 14 FocSign Lite Client User Manual Chapter 4 Program Management You can create and modify program, and release it to different terminals. 4.1 Create Program Purpose:

Create and configure the program according to the terminal type. Customize the program layout. The layout is same to the final release effect. Step 1 Go to Control Panel > Create Program. Step 2 Configure program basic information. Figure 4-1 Program Basic Settings Step 3 Set page attributes in Area 3. For detailed steps, refer to 4.1.2 Manage Page. Step 4 Select window type in Area 1. For detailed steps, refer to 4.1.3 Add Window. Step 5 Edit page layout with the tools listed in Area 2. For detailed steps, refer to 4.1.4 Edit Page. 4.1.1 Configure Program Basic Settings Purpose:

Configure the program name, type and canvas size. Step 1 Go to Control Panel > Create Program. 15 FocSign Lite Client User Manual Step 2 Enter the information accordingly. Figure 4-2 Program Basic Settings Program Name: Customized to specify the program. Program Type: Choose the type according to the terminal type. Touchscreen program can realize touch-screen function only when its played on the touchscreen terminal. Canvas Size: Choose the size according to terminal type. It supports to be customized. 4.1.2 Manage Page Step 1 Edit Page Attributes. Figure 4-3 Page Attributes 16 FocSign Lite Client User Manual Play Duration:

When Play Mode is Custom, you can set the play duration accordingly. (Unit: s) When Play Mode is Auto, you need to set the play times. If you enter N, the page plays N time(s). When Play Mode is Loop Play, the page plays in a continuous loop. Step 2 Optionally, click to add page. Up to 32 pages can be added. You can adjust the program order. Program will be played according to the page order. 4.1.3 Add Window You can add template, picture, audio, video, text, document, application, clock, countdown, passenger flow, streaming media, network camera, web page, etc. And you can create empty windows. After configuring the page, click the window to add it to the page. Window Type Format Requirement Table 4-1 Format Requirement Video Picture Audio ASF, AVI, MPG, 3GP, MOV, MKV, WMV, FLV, MP4 BMP, JPG, PNG, GIF MP3, WAV, WMA Document TXT, PDF 17 FocSign Lite Client User Manual Figure 4-4 Window List Add Empty Window You can drag pictures, videos, and other materials into an empty window, or directly add a picture window, a video window, etc. Step 1 Click and click the page to create an empty window. Step 2 Drag and scale the window or edit the attributes to set its position and size. Step 3 Drag the material into the window. 18 FocSign Lite Client User Manual Add Template Window There are several templates consisting of passenger flow, picture, network camera, and other materials. You can draw the desired material and then edit it. The edited programs are also allowed to be set as templates. Step 1 Click Template and draw the desired material to the page to create a template window. The template material cannot be relocated and scaled. Step 2 Optionally, edit the text and pictures in the template. 1) Click Normal or Alarm to edit related picture. 2) Click the text directly to edit, and configure related parameters on the right. 3) Click to select the desired background pictures or icons. Step 3 Configure the camera channel. Enable NVR: Configure the parameters of NVR. Add Network Camera Material: Refer to Add IPC Material Window. Step 4 Set the maximum number of people allowed to enter. Step 5 Drag the material into the window. Step 6 Configure Voice Alarm, check the desired alarm events. Step 7 Check the desired content to be displayed. Add Picture Window Step 1 Select Picture on the program editing interface. Step 2 Click to select the picture to be added. Step 3 Drag the picture to the canvas. Step 4 Adjust the picture position and size by dragging and scaling, or by editing the attributes on the right. Add Video Window Up to 4 video windows can be added for one single page. Step 1 Select Video on the program editing interface. Step 2 Click to select the video to be added. 19 FocSign Lite Client User Manual Step 3 Drag the video to the canvas, and set the position and size. Step 4 Set the Play Mode. Material Time: Play the material for one entire time. Custom: Play the material for the time you set. Step 5 Optionally, check Close Auto to play the video in mute. For multiple video windows added to one page, only one video can be played in non-mute mode. Check Close Auto for the other windows. Add Audio Window Only one audio window can be added for one single page. Step 1 Select Audio on the program editing interface. Step 2 Click to select the audio to be added. Step 3 Drag the audio to the canvas, and set the position and size. Step 4 Set the Play Mode. Material Time: Play the material for one entire time. Custom: Play the material for the time you set. Add PDF Window Step 1 Select PDF on the program editing interface. Step 2 Click to select the PDF to be added. Step 3 Drag the PDF to the canvas, and set the position and size. Step 4 Set the play mode and duration. Add TXT Window Step 1 Select Text on the program editing interface. Step 2 Click to select the TXT to be added. Step 3 Drag the TXT to the canvas, and set the position and size. Step 4 Set the font size, font color, background color. 20 FocSign Lite Client User Manual Click window. and click the page to create an empty TXT window. You can edit the content in the Add APP Window Only 1 APP window can be added for one single page, and no other window can be added. Step 1 Select Application on the program editing interface. Step 2 Click to select the app to be added. Step 3 Drag the app to the canvas. Add Clock Window Only 1 clock window can be added for one single page. Step 1 Select Clock on the program editing interface. Step 2 Click to the canvas, adjust the size, position and background picture. Step 3 Set the clock format:

1) Click the clock icon to display the content settings. 2) Check the checkbox accordingly set clock format. Add Countdown Window Step 1 Select Countdown on the program editing interface. Step 2 Click to the canvas, adjust the size, position and background picture. Step 3 Set the stop time and unit. Step 4 Set the countdown format, such as font, color, etc. Add Passenger Flow Window Step 1 Select Passenger Flow in the program editing interface. Step 2 Drag the passenger flow material to the canvas, and adjust the size and position. Step 3 Refer to Add Template Window for other configurations. 21 FocSign Lite Client User Manual Add Stream Media Window Up to 4 stream media window can be added for one single page. Step 1 Select Stream Media on the program editing interface. Step 2 Click

, enter name and URL, and click Confirm. Step 3 Drag the stream media to the canvas, adjust the size and position. Step 4 Set play duration on the right. Step 5 Optionally, check Close Audio to play it in mute. Add IPC Material Window Step 1 Select Network Camera on the program editing interface. Step 2 Click

, enter the parameters, and click Confirm. Step 3 Drag the IPC material to the canvas, adjust the size and position. Step 4 Set play duration on the right. Step 5 Optionally, check Close Audio to play it in mute. Add Web Window Step 1 Select Web URL on the program editing interface. Step 2 Click

, enter name and URL, and click Confirm. Step 3 Drag the IPC material to the canvas, adjust the size and position. Step 4 Set play duration on the right. Add Button Window You can only add button window in touchscreen program. Button window only takes effect on the touchscreen terminal. Up to 16 button windows are supported to add to one page. Step 1 Click and click the page to create a button window. Step 2 Adjust the button size and position. 22 FocSign Lite Client User Manual Step 3 Set window type:

Pop-up window: click the button to pop-up the window. Normal: You need to set the connect method in the Event Type. Step 4 Select event type and link:

New Pop-up Window: click the button to pop-up a new window. New Page: click the button to open a new page. 4.1.4 Edit Page Click the buttons to edit the program. Figure 4-5 Function Bar Table 4-2 Function Description Function Description Quickly add an empty, template, or button window. Align the horizontal positions of multiplae windows to the left, middle, or right. Align the vertical positions of multiple windows to the top, middle, or bottom. Display the window with the real resolution. Self-adaptive resolution. Auto Adhesion Once enabled, two windows will be connected when theyre near enough. Preview Preview the edited page. Save the current page as a template. 4.2 Schedule Program Purpose:

You can make a program playback schedule according to your needs. 4.2.1 Create Schedule Step 1 Go to Control Panel > Create Schedule. 23 FocSign Lite Client User Manual Step 2 Select Configuration Mode: Day, Week, Custom. Figure 4-6 Add Schedule Custom mode supports to play the program on specific period. Up to 90-day custom schedule is supported. Step 3 Select Time Interval. Step 4 Select program in Program List, and drag in the schedule. Step 5 Set the start time and end time. Step 6 Click Release to enter the release interface. 4.2.2 Create Loop Schedule Step 1 Go to Control Panel > Create Schedule. Step 2 Set Configuration Mode as Loop. Step 3 Drag the program into the play list. Step 4 Click to add new list. Up to 8 programs can be added to one play list. Up to 8 loop play lists can be created. Step 5 Play List 1 is no time-limited loop by default. Select time for the other loop play list. No Time- Limited Loop: The programs are played by order. Time- Limited Loop: Play the programs at specific period. The priority of Time- Limited Loop is higher than the No Time- Limited Loop. Step 6 Click Release to enter the release interface. 24 FocSign Lite Client User Manual 4.3 Release Purpose:

Release the programs to information release screen. 4.3.1 Release Program Before you start:

User has finished the program creating process. Step 1 Open Release interface. Click Quick Release on the program editing interface;

Click Release on the creating schedule interface;

Click on the play list interface. Step 2 Enter Task Name. Step 3 Select Applicable Terminal. Figure 4-7 Release Task Step 4 Select Effective Time. If you dont the select time, the program will be release instantly. 25 FocSign Lite Client User Manual Step 5 Click Release. 4.3.2 Cut-in Release Purpose:

The program or text will be played once the terminal received cut-in release order. Cut-in Program Release Step 1 Create Cut-in Release task. Click Cut-in Program on the program editing interface;

Click on the play list interface. Step 2 Enter the release task name. Figure 4-8 Cut-in Release Task Step 3 Select Applicable Terminal. Step 4 Select Time Duration. Step 5 Click Release. Cut-in Text Message Step 1 Click Cut-in Text Message on the control panel. Step 2 Enter the task name. 26 FocSign Lite Client User Manual Step 3 Select Applicable Terminal. Step 4 Click to Add Content, fill the text messages. Up to 5 messages can be added. Step 5 Select Time. Step 6 Set the window position, font, background, display mode, etc. Step 7 Optionally, click Preview to check the message play effect. Step 8 Click Release. 4.3.3 Release Default Video Purpose:

You can set program as default video and release it to the terminal. The terminal will play default video automatically if there is no program or cut-in. Step 1 Select terminals in Terminal Management. Step 2 Enable Default Play Enable. Step 3 Select terminals Control Panel, then click

. Step 4 Enter task name. Step 5 Select terminals. Step 6 Check Effective Time, then click to set the effective time. The program will become effective immediately after release if you do not check Effective Time. Step 7 Click Release. 4.3.4 Relevant Operations of Release Purpose:

Refer to the following descriptions for relevant operations of release in Release Management.

: View the release details of program or schedule.

: Cancel release.

: Delete program release/schedule release. Cancel release: Click Cancel Release to cancel releasing program in Release Progress interface. Re-release: Click Re-release to re-release cancelled task in Release Progress interface. 27 FocSign Lite Client User Manual Chapter 5 System Management Go to the upper-right corner of the client to set the saving path and system language, change password, or get more help. 5.1 Space Management Designate a saving path for the uploaded materials, and check storage space of the current saving path. Step 1 Click on the right side of the homepage to enter Space Management. Step 2 Optionally, view the current space usage. Step 3 Click Set to set the desired saving path for materials. Step 4 Click Save. Step 5 Optionally, click Unused Material List to check the details of used materials. 5.2 Account Setting After logging in to the client, you can change the admin password and enable/disable auto login at anytime. on the upper-right corner of the client when needed, the following operations are Click allowed:

Change the login password. Enable/Disable auto login. 5.3 Client Locking To ensure data security and avoid improper operation, you can lock the client as required. on the upper-right corner of the client, the current interface will be lock. Enter your Click password to unlock. 5.4 System Information Get help information, check software version, and set system language. on the upper-right corner of the client when needed, the following operations are Click allowed:

View the guidance of creating program. 28 FocSign Lite Client User Manual Download the user manual. Check the open source software license. Check software version. Set the desired system language. 29 FocSign Lite Client User Manual UD20560B-A 0

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name Hangzhou Hikvision Digital Technology Co., Ltd. Address Grantee Code FCC ID No. 555 Qianmo Road, Binjiang District, Hangzhou 310052, China 2ADTD 2ADTD-DS-D60CB Authorized Contact Name Long Cheng Contact Email Contact Phone chenglong6@hikvision.com

+8618969187825 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

a) b) c) d) e) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

labeling the equipment with the exact FCC ID as specified in this application,

(1)

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Date: 2022-09-06 Applicant Signature:

Print Name:

Title:

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Long Cheng Testing & Certification Engineer Applicant Declaration Rev:0.0

HIK VISION Digital Signage Player Model: DS-D60C-B UP: 12y0 === 2AMax SN: A23456789 04/2022 [<4]

FCC ID: 2aDTD-Ds-D60cB Made in China KZXXXXXXXXXXXX Manufacturer: Hangzhou Hikvision Digital Technology CoWxa Address: No.555 Qlanmo Road, Binjlang District, Hangzhou 310052, China 68.9srecv 30 20 100 STAINLESS STEEL. 50 06 cuit

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)this device may not cause harmful interference, and

(2)this device must accept any interference received, including interference that may cause undesired operation. Manufacturer: Hangzhou Hikvision Digital Technology Co.,Ltd. Address: No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China

Hangzhou Hikvision Digital Technology Co., Ltd. TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2ADTD-DS-D60CB To whom it may concern:

Date: 2022-09-06 We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Hangzhou Hikvision Digital Technology Co., Ltd. This authorization is valid until further written notice from the applicant. Name (Printed): Long Cheng Title: Testing & Certification Engineer Signature:

On behalf of Company: Hangzhou Hikvision Digital Technology Co., Ltd. Telephone: +8618969187825

Hangzhou Hikvision Digital Technology Co., Ltd. To:

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Hangzhou Hikvision Digital Technology Co., Ltd. No. 555 Qianmo Road, Binjiang District, Hangzhou 310052, China Regarding:

Confidentiality Request regarding application for FCC ID: 2ADTD-DS-D60CB LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature:

Printed Name (on file with the FCC associated with the Grantee Code): Long Cheng Title: Testing & Certification Engineer Company Name: Hangzhou Hikvision Digital Technology Co., Ltd.

Hangzhou Hikvision Digital Technology Co., Ltd. Current Date: 2022-09-06 To:

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. No. 588 West Jindu Road, Songjiang District, Shanghai, China. 201612 Dear Sir/Madam, Subject: Declaration Letter about Identity of Products

*WE (Hangzhou Hikvision Digital Technology Co., Ltd.) HEREBY DECLARED THAT Product Description Digital Signage Player Model No. DS-D60WXYZ-X/YZ, DS-D6**-*, DS-D6**-*/*,DS-D6**-**/*, DS-D6**-**/**, DS-D6**-*/**, DS-D6*****-*/**

(* can be 0-9 or A-Z or a-z or blank, denotes specific information) Manufacturers Name Hangzhou Hikvision Digital Technology Co., Ltd. Manufacturers Address No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China

*Except that the model number and appearance deviation, are identical with the original product as follows:

Note: The definition of identical should be electrically identical. A device will be considered to be electrically identical if no changes are made to the devices schematics, board layouts, component layouts, chip sets, resistors and all other electrical aspects of the device are identical with the model(s) below which sample(s) we chose to be tested by SGS:

Model No. ():

DS-D60C-B Manufacturers Name (): Hangzhou Hikvision Digital Technology Co., Ltd. Manufacturers Address ):

No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Sincerely, Signature ():

Printed Name ():

Long Cheng Position/Title ():

Testing & Certification Engineer Contact Number ():

+8618969187825