all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
Users Manual | Users Manual | 631.06 KiB | April 18 2019 | |||
1 2 | Cover Letter(s) | April 18 2019 | ||||||
1 2 | Block Diagram | Block Diagram | April 18 2019 | confidential | ||||
1 2 | Cover Letter(s) | April 18 2019 | ||||||
1 2 | Cover Letter(s) | April 18 2019 | ||||||
1 2 | Cover Letter(s) | April 18 2019 | ||||||
1 2 | External Photos | April 18 2019 | ||||||
1 2 | Internal Photos | April 18 2019 | ||||||
1 2 | ID Label/Location Info | April 18 2019 | ||||||
1 2 | Cover Letter(s) | April 18 2019 | ||||||
1 2 | Operation description | Operational Description | April 18 2019 | confidential | ||||
1 2 | RF Exposure Info | April 18 2019 | ||||||
1 2 | SDR Software | SDR Software/Security Inf | April 18 2019 | confidential | ||||
1 2 | Schematic | Schematics | April 18 2019 | confidential | ||||
1 2 | Schematics | Schematics | April 18 2019 | confidential | ||||
1 2 | Test Setup Photos | April 18 2019 | ||||||
1 2 | Test Report | April 18 2019 | ||||||
1 2 | Cover Letter(s) | April 18 2019 | ||||||
1 2 | Cover Letter(s) | April 18 2019 |
1 2 | Users Manual | Users Manual | 631.06 KiB | April 18 2019 |
Mobile Video Recorder User Manual Mobile Video Recorder User Manual Legal Information User Manual 2018 Hangzhou Hikvision Digital Technology Co., Ltd. About this Manual This Manual is subject to domestic and international copyright protection. Hangzhou Hikvision Digital Technology Co., Ltd. ("Hikvision") reserves all rights to this manual. This manual cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of Hikvision. Please use this user manual under the guidance of professionals. Trademarks and other Hikvision marks are the property of Hikvision and are registered trademarks or the subject of applications for the same by Hikvision and/or its affiliates. Other trademarks mentioned in this manual are the properties of their respective owners. No right of license is given to use such trademarks without express permission. Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, REGARDING THIS MANUAL. HIKVISION DOES NOT WARRANT, GUARANTEE, OR MAKE ANY REPRESENTATIONS REGARDING THE USE OF THE MANUAL, OR THE CORRECTNESS, ACCURACY, OR RELIABILITY OF INFORMATION CONTAINED HEREIN. YOUR USE OF THIS MANUAL AND ANY RELIANCE ON THIS MANUAL SHALL BE WHOLLY AT YOUR OWN RISK AND RESPONSIBILITY. REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS. i Mobile Video Recorder User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body. FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE"
and comply therefore with the applicable harmonized European standards listed under the RE Directive 2014/53/EU, the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU. 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of ii Mobile Video Recorder User Manual equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info iii Mobile Video Recorder User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Danger Caution Note Description Indicates a hazardous situation which, if not avoided, will or could result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results. Provides additional information to emphasize or supplement important points of the main text. iv Mobile Video Recorder User Manual Contents Chapter 1 Product Introduction .................................................................................................. 1 1.1 Introduction ........................................................................................................................... 1 1.2 Key Features ........................................................................................................................... 1 Chapter 2 Start Up Device ........................................................................................................... 2 2.1 Activate the Device ................................................................................................................ 2 2.1.1 Default Information ...................................................................................................... 2 2.1.2 Activation ...................................................................................................................... 2 2.2 Access Device via Web Browser ............................................................................................. 4 Chapter 3 Basic Operation .......................................................................................................... 5 3.1 Configure Date & Time ........................................................................................................... 5 3.2 IP Camera Adding ................................................................................................................... 5 3.2.1 Activate IP Camera ........................................................................................................ 5 3.2.2 Add IP Camera ............................................................................................................... 6 3.2.3 Edit IP Camera ............................................................................................................... 6 3.3 Recording ............................................................................................................................... 7 3.3.1 Format Storage Media .................................................................................................. 7 3.3.2 Configure Continuous Recording .................................................................................. 7 3.3.3 Configure Event Triggered Recording ............................................................................ 8 3.3.4 Disaster Storage ............................................................................................................ 8 3.4 Playback ................................................................................................................................. 9 3.5 Backup ................................................................................................................................... 9 3.5.1 Back Up Videos ............................................................................................................. 9 3.5.2 Back Up Clipped Videos .............................................................................................. 10 3.5.3 Back Up Pictures ......................................................................................................... 10 Chapter 4 Network ................................................................................................................... 11 4.1 Network Connection ............................................................................................................ 11 v Mobile Video Recorder User Manual 4.1.1 Dial .............................................................................................................................. 11 4.1.2 Connect Wi-Fi .............................................................................................................. 11 4.1.3 Set Local Network ....................................................................................................... 12 4.1.4 Port Configuration ....................................................................................................... 12 4.1.5 DDNS Configuration .................................................................................................... 12 4.2 Platform Connection ............................................................................................................ 13 4.2.1 Connect to Mobile Surveillance Platform ................................................................... 13 4.2.2 Connect to Guarding Vision ........................................................................................ 14 4.3 Network Sharing .................................................................................................................. 15 4.3.1 Set Wi-Fi AP ................................................................................................................. 15 4.3.2 Set Network Share ...................................................................................................... 15 Chapter 5 Live View and Configuration ..................................................................................... 16 5.1 Live View .............................................................................................................................. 16 5.1.1 Start/Stop Live View .................................................................................................... 16 5.1.2 Split Screen ................................................................................................................. 16 5.1.3 Select Live View Stream .............................................................................................. 16 5.1.4 Manual Capture .......................................................................................................... 16 5.1.5 Manual Recording ....................................................................................................... 17 5.1.6 Start/Stop Two-Way Audio .......................................................................................... 17 5.1.7 Set Live View Volume .................................................................................................. 17 5.1.8 Full-Screen Live View .................................................................................................. 17 5.1.9 Channel-Zero ............................................................................................................... 18 5.2 PTZ Operation ...................................................................................................................... 18 5.2.1 Configure PTZ .............................................................................................................. 18 5.2.2 PTZ Control Panel ........................................................................................................ 18 5.3 Local Configuration .............................................................................................................. 19 Chapter 6 Mobile Device Features ............................................................................................ 20 6.1 Timed Shutdown .................................................................................................................. 20 vi Mobile Video Recorder User Manual 6.2 Delayed Shutdown ............................................................................................................... 20 6.3 Configure Satellite Positioning ............................................................................................. 20 6.4 Configure G-Sensor Alarm ................................................................................................... 21 6.5 Configure Sensor-in .............................................................................................................. 22 Chapter 7 Camera Management ............................................................................................... 23 7.1 Configure Encoding Parameters ........................................................................................... 23 7.2 Image Settings ...................................................................................................................... 23 7.2.1 Set Image Parameters ................................................................................................. 23 7.2.2 Set Mirror Type ........................................................................................................... 23 7.2.3 Restore Default Parameters ........................................................................................ 23 7.3 Set OSD Parameters ............................................................................................................. 24 7.4 Set Privacy Mask .................................................................................................................. 24 Chapter 8 Driving Behavior Configuration ................................................................................. 25 8.1 Smart Device Driving Behavior Configuration ...................................................................... 25 8.1.1 Configuration .............................................................................................................. 25 8.1.2 Play Videos and Pictures ............................................................................................. 26 8.2 Other Device Driving Behavior Configuration ...................................................................... 26 8.2.1 Connect Smart Terminal .............................................................................................. 26 8.2.2 Set Arming .................................................................................................................. 27 Chapter 9 Events and Alarms .................................................................................................... 28 9.1 Configure Motion Detection Alarm ...................................................................................... 28 9.2 Configure Video Loss Alarm ................................................................................................. 28 9.3 Configure Video Tampering Alarm ....................................................................................... 28 9.4 Configure Alarm Input ......................................................................................................... 29 9.5 Configure Alarm Output ....................................................................................................... 29 9.6 Configure Exception Alarm .................................................................................................. 30 9.7 Configure Arming Schedule ................................................................................................. 30 9.8 Configure Linkage Actions .................................................................................................... 30 vii Mobile Video Recorder User Manual 9.8.1 Trigger Recording ........................................................................................................ 30 9.8.2 Trigger Audible Warning ............................................................................................. 30 9.8.3 Full Screen Monitoring ................................................................................................ 31 9.8.4 Trigger Alarm Output .................................................................................................. 31 Chapter 10 Security .................................................................................................................. 32 10.1 User Account Management ............................................................................................... 32 10.2 Set Security Question ......................................................................................................... 32 10.3 Configure Whitelist ............................................................................................................ 33 10.4 SSH Settings ....................................................................................................................... 33 Chapter 11 Maintenance .......................................................................................................... 34 11.1 View System Information ................................................................................................... 34 11.2 Search Log File ................................................................................................................... 34 11.3 Upgrade the System ........................................................................................................... 34 11.4 Rebooting ........................................................................................................................... 34 11.5 Restore Default Settings ..................................................................................................... 34 11.6 Export Configuration File ................................................................................................... 35 11.7 Import Configuration File ................................................................................................... 35 11.8 Configure DST Settings ....................................................................................................... 35 11.9 Configure Local Output ...................................................................................................... 36 11.10 Configure RS-232 ............................................................................................................. 36 Chapter 12 Local Menu Operation ............................................................................................ 37 12.1 IP Camera Adding ............................................................................................................... 37 12.1.1 Activate IP Camera .................................................................................................... 37 12.1.2 Add IP Camera .......................................................................................................... 37 12.1.3 Edit IP Camera ........................................................................................................... 38 12.2 Recording ........................................................................................................................... 38 12.2.1 Format Storage Media .............................................................................................. 38 12.2.2 Configure Recording Schedule .................................................................................. 38 viii Mobile Video Recorder User Manual 12.3 Playback ............................................................................................................................. 39 12.4 Back up .............................................................................................................................. 39 ix Mobile Video Recorder User Manual Chapter 1 Product Introduction Introduce the recorder and its key features. 1.1 Introduction Adopting embedded Linux operating system, mobile video recorder (hereinafter referred to as the recorder) provides powerful monitoring functions. It can both work alone as a recorder and cooperate with other devices to build a comprehensive surveillance system. The recorder is widely applied to the surveillance projects of public transportation, school bus, etc. 1.2 Key Features User-friendly GUI providing easy and flexible operations. Pluggable 3G/4G module and built-in Wi-Fi module providing flexible data transmission Information collection interfaces collecting driving information such as left/right turn, braking, solutions. reversing, etc. Specialized aviation connectors ensuring signal stability. Ignition startup and delay (0 to 6h) shutdown. Battery protection avoids vehicle from running out of battery. Wide-range power input (+ 9 to + 32 VDC). Power-off protection avoids key data from loss. Tensile aluminum chassis with no fan design well adaptable to working environment. Software-based firewall supported. GNSS (Global Navigation Satellite System) module precisely positioning the vehicle via the satellite and recording the location information in the stream. 1 Mobile Video Recorder User Manual Chapter 2 Start Up Device 2.1 Activate the Device You can activate the recorder via the SADP software, the Web, the client software or the local menu. Caution If you want to activate the device via the SADP software, the Web or the iVMS-4200 client software, make sure that the device and your computer are in the same network segment. If you want to activate the recorder via the local menu, you must connect the device to an external monitor. 2.1.1 Default Information The default setting of the recorder is as follows:
Default IP: 192.168.1.64. Default user name: admin. 2.1.2 Activation For the first-time access, you need to activate the recorder by setting an admin password. No operation is allowed before activation. Activate via Local Menu You can activate the recorder via the local menu when it's connected to an external monitor. Steps 1. Enter the same password in Password and Confirm Password. Note We highly recommend you to create a strong password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product. 2. Click OK. 2 Mobile Video Recorder User Manual Activate via SADP SADP software is used for detecting the online device, activating the device, and resetting the password. Get the SADP software from the supplied disk or the official website, and install the SADP according to the prompts. Follow the steps to activate the camera. Before You Start Ensure your computer and the recorder are in the same network segment. Install the SADP software in your computer. Steps 1. Run the SADP software. 2. Check the recorder status from the device list, and select the inactive recorder. Note We highly recommend you to create a strong password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product. 3. Enter the same password in Password and Confirm Password. 4. Click Activate. Activate via iVMS-4200 iVMS-4200 is versatile video management software for multiple kinds of devices. Get the client software from the supplied disk or the official website, and install the software according to the prompts. Follow the steps to activate the device. Before You Start Ensure your computer and the recorder are in the same network segment. Install the software in your computer. Steps 1. Run the software. 2. Go to Control Panel Device Management . 3. Select inactive recorders. 4. Click Activate. Note We highly recommend you to create a strong password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. 3 Mobile Video Recorder User Manual And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product. 5. Enter the same password in Password and Confirm Password. 6. Click OK. Activate via Web Browser You can activate the device via a web browser. Before You Start Ensure your computer and the recorder are in the same network segment. Steps 1. Open web browser, input the IP address of the device and then press Enter. Note We highly recommend you to create a strong password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product. 2. Enter the same password in Password and Confirm. 3. Click OK. 2.2 Access Device via Web Browser Get access to the recorder via web browser. Steps 1. Open the web browser, enter the IP address of the recorder, and then press Enter. 2. Enter User Name and Password and click Login. 3. Install the plug-in before viewing the live video and managing the camera. Please follow the installation prompts to install the plug-in. What to do next Click Logout in top right corner to log out the recorder. 4 Mobile Video Recorder User Manual Chapter 3 Basic Operation You can perform the basic operations once the recorder is connected to an IP camera. Note All the operations from Chapter 3 to Chapter 11 is done via web browser. 3.1 Configure Date & Time Configure time zone and time synchronization mode. Steps 1. Go to Configuration System System Settings Time Settings . 2. Select Time Zone according to the recorder location. 3. Select time synchronization mode as NTP or Manual Time Sync.
-
If an NTP server is available, select NTP and enter NTP server information to synchronize NTP server time to your recorder.
- Select Manual Time Sync. and set time to customize the recorder time.
- Select Manual Time Sync. and check Sync. with computer time to synchronize the computer time to your recorder. 4. Click Save. 3.2 IP Camera Adding The section is only available for the recorder that supports network camera. 3.2.1 Activate IP Camera Before adding an IP camera, activate it by setting a password for it. Steps 1. Go to Configuration System Camera Management . 2. Select an inactivated IP camera. Note We highly recommend you to create a strong password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product. 1. Click Activation. 5 Mobile Video Recorder User Manual 4. Enter the same password in New Password and Confirm. 5. Click OK. 3.2.2 Add IP Camera You can add the activated IP cameras. Ensure the device and IP cameras are in the same network segment. Before You Start The record and the camera to add must be in the same network segment. Steps 1. Go to Configuration System Camera Management . 2. Optional: If the recorder and the camera are in different network segment, modify IP camera address. 1) Check the IP camera and click Modify. 2) Enter IP Address and Password. 3) Click OK. 3. Select a camera and click Add. Note If the recorder password is the same with the camera's, click Quick Add to add the camera. 4. Enter IP camera information. 5. Click OK. 3.2.3 Edit IP Camera You can visit, delete, and modify the added IP cameras. Before You Start If the recorder contains only one network card, you can visit IP camera via the recorder. If the recorder contains dual network card, you need to enable virtual host function before visiting IP camera via the recorder. Go to Configuration Network Advanced Settings Other and check Enable Virtual Host. Steps 1. Go to Configuration System Camera Management . 2. Optional: Click address of IP camera to visit. 3. Optional: Check IP cameras and click Delete to delete added IP cameras. 6 Mobile Video Recorder User Manual 3.3 Recording To record the videos for connected cameras, you need to install a storage media and format it, and configure the recording schedule. 3.3.1 Format Storage Media A newly installed storage media must be initialized before it can be used. Before You Start Install a storage media. Steps 1. Go to Configuration Storage Storage Management . 2. Check the storage media and click Format. Result After format, the storage media status should be Normal. 3.3.2 Configure Continuous Recording The recorder is configured with all-day continuous recording by default. Before You Start Install and format a storage media. Steps 1. Go to Configuration Storage Schedule Settings . 2. Select Channel No. 3. Check Enable. 4. Select recording type as Continuous. 5. Optional: Click Advanced to configure Pre-record Post-record. Pre-record The time you set to start recording before the scheduled time or the event. For example, if an alarm triggers recording at 10:00, and the pre-record time is set as 5 seconds, the device starts to record at 9:59:55. Post-record The time you set to stop recording after the scheduled time or the event. For example, if an alarm triggered recording ends at 11:00, and the post-record time is set as 5 seconds, the device records until 11:00:05. 6. Set recording schedule. For detailed steps, refer to Configure Arming Schedule . 7. Optional: Click Copy to to copy upper settings to other channel. 8. Click Save. 7 Mobile Video Recorder User Manual 3.3.3 Configure Event Triggered Recording Trigger recording when an event is triggered. Before You Start Install and format the storage media. Configure event parameters. For details, refer to Events and Alarms . Steps 1. Go to Configuration Storage Schedule Settings . 2. Select Channel No. 3. Check Enable. 4. Select recording type as Motion | Alarm, Alarm, Motion, or Motion & Alarm. Motion | Alarm Trigger recording when either motion detection or alarm input is detected. Alarm Trigger recording when alarm input is detected. Motion Trigger recording when either motion detection detected. Motion & Alarm Trigger recording when both motion detection and alarm input are detected. 5. Optional: Click Advanced to configure Pre-record Post-record. Pre-record The time you set to start recording before the scheduled time or the event. For example, if an alarm triggers recording at 10:00, and the pre-record time is set as 5 seconds, the device starts to record at 9:59:55. Post-record The time you set to stop recording after the scheduled time or the event. For example, if an alarm triggered recording ends at 11:00, and the post-record time is set as 5 seconds, the device records until 11:00:05. 6. Set recording schedule. For detailed steps, refer to Configure Arming Schedule . 7. Optional: Click Copy to to copy upper settings to other channel. 8. Click Save. 3.3.4 Disaster Storage The function is only available for recorder supporting mobile fireproof storage box. The recorder will save videos in both HDD and mobile fireproof storage box to ensure data seurity. 8 Mobile Video Recorder User Manual Before You Start Connect a mobile fireproof storage box to your recorder. Configure the recording schedule. Steps 1. Go to Configuration Vehicle Storage For Calamity . 2. Check Enable. 3. Check Redundant Channel. The recorder will save the videos of the selected channels in both HDD and mobile fireproof storage box. 4. Click Save. 3.4 Playback Play videos saved in storage medias. Steps 1. Go to Playback. 2. Click to select a channel in channel list. 3. Select playback type as Ordinary Search or Event Search.
- To search all the videos, select Ordinary Search.
- To search event videos, select Event Search. 4. Search search conditions. 5. Click Search. 6. Click to start playback. Single frame playback. Slow forward. Capture. For picture saving path, refer to Configuration Local Save snapshots when playback to . Full screen. Pause. Fast forward. Stop all playbacks. Turn on audio. 3.5 Backup 3.5.1 Back Up Videos Download videos to a local path. Steps 1. Go to Playback. 9 Mobile Video Recorder User Manual
. 2. Click 3. Search search conditions. 4. Click Search. 5. Check videos to download and click Download. 6. For the video saving path, refer to Configuration Local Save Downloaded Files to . 3.5.2 Back Up Clipped Videos Clip videos and save them to a local path. Steps 1. Go to Playback. 2. Start playback. 3. Click 4. Click 5. For clipped video saving path, refer to Configuration Local Save clips to . to start clipping. to stop clipping. 3.5.3 Back Up Pictures Back up pictures to a local path. Steps 1. Go to Picture. 2. Set search conditions. 3. Click Search. 4. Check pictures to download. 5. Click Donwload. 6. For picture saving path, refer to Configuration Local Picture and Clip Settings . 10 Mobile Video Recorder User Manual Chapter 4 Network 4.1 Network Connection 4.1.1 Dial Set dialing parameters. Before You Start Install 3G/4G SIM card and connect 3G/4G antenna to your recorder. Steps 1. Go to Configuration Network Basic Settings 3G/4G . 2. Check Enable. 3. Click Dial Parameters. 4. Select Network Mode.
- Automatic: The recorder will automatically switch to the strongest network.
- Auto-Search and Auto-Switch: Network priortiy: 4G > 3G > 2G. The recorder will automaticall connect the network of high priorty.
- 3G: The recorder only connects 3G network.
- 4G: The recorder only connects 4G network. 5. Optional: To connect private network, enter Access Number, User Name, Password, and APN. 6. Click Save. 7. Optional: Click Wireless Dial-up Status to view dialing status. 4.1.2 Connect Wi-Fi Configure Wi-Fi parameters. Steps 1. Go to Configuration Network Basic Settings TCP/IP . 2. Set WLAN parameters. 1) Click WLan 1. 2) Optional: Check DHCP. Use SADP tool to obtain the recorder IP address when DHCP is 3) Enter wireless network IPv4 Address, IPv4 SubnetMask, IPv4 Default Gateway, and DNS enabled. Server . 4) Click Save. 3. Go to Configuration Network Advanced Settings Wi-Fi . 1) Check Enable Wi-Fi. 2) Click Search to search available wireless networks. 3) Select a wireless network in Wireless List. 11 Mobile Video Recorder User Manual 4) Enter SSID. 5) Select Network Mode as Managed. 6) Select Security Mode and enter Wi-Fi key. 4. Click Save. 5. Optional: Go to Configuration Network Advanced Settings Wi-Fi Wi-Fi Status to view Wi-Fi status. 4.1.3 Set Local Network Configure local network parameters. Steps 1. Go to Configuration Network Basic Settings TCP/IP . 2. Select LAN port.
- Debug Interface: Used to debug the recorder.
- Rear interface: Used to connect network cameras. 3. Enter network parameters: IPv4 Address, IPv4 Subnet Mask, and IPv4 Default Gateway. 4. Optional: To access the recorder via internet, configure DNS server. 5. Click Save. 4.1.4 Port Configuration Go to Configuration Network Basic Settings Port . HTTP Port Used to access the recorder via web browser. RTSP Port Used to get stream.HTTPS Port HTTPS Port Used for secure communication over a network. Server Port Used to access the recorder via client software. 4.1.5 DDNS Configuration If your recorder external network is a dynamic IP address, you can use the Dynamic DNS (DDNS) for network access. Before You Start Register your recorder on the DDNS server. Configure local network IP address, subnet mask, gateway, and DNS server. Create port mapping, default port:80, 8000, and 554. 12 Mobile Video Recorder User Manual Steps 1. Go to Configuration Network Basic Settings DDNS . 2. Select DDNS Type. 3. Enter server information. 4. Click Save. What to do next Open the web browser and enter the recoder domain name to visit it. 4.2 Platform Connection 4.2.1 Connect to Mobile Surveillance Platform The device can be remotely accessed via mobile surveillance platform. Before You Start Create the device ID on mobile surveillance platform. Steps 1. Go to Configuration Network Advanced Settings Platform Access . 2. Check Enable. 3. Select Platform Access Mode as Ehome Platform. 4. Select Server Address Type, and enter Server Address, Server Port, and Device ID. Server Address Enter the static IP address of mobile surveillance platform. Server Port The default value is 7660. Device ID The ID of the device registered on the mobile surveillance platform. If you leave it empty, device logs in to the platform with serial No. 5. Click OK. Note You can download mobile surveillance platform to your computer by visiting our official website and going to Home > VMS > Support > Download > iVMS-5200 Mobile Surveillance. Official website: http://www.hikvision.com/en/ . You can download iVMS-5260M to your mobile phone by searching it in app store/google play or scan QR code below. If you use Android system, install googleplay application on your mobile phone before scanning the QR code. 13 Mobile Video Recorder User Manual Figure 4-1 iOS Figure 4-2 Android 4.2.2 Connect to Guarding Vision The device can be remotely accessed via guarding vision platform. Before You Start Connect your recorder to internet. Configure IP address, sub-netmask, gateway, and DNS server of LAN port. Steps 1. Go to Configuration Network Advanced Settings Platform Access . 2. Check Enable. 3. Select Platform Access Mode as Guarding Vision. Caution Valid security code range [6-12]. You can use a combination of numbers, lowercase, and uppercase. 4. Enter a cusmized Security Code. You need to enter the security code when adding the recorder in guarding vision. 5. Click Save. 6. Visit guarding vision platform.
- For computer user: Visit dev.guardingvision.com .
- For mobile phone user: Download Guarding Vision application in app store or google play. 7. Register an account. 8. Add the recorder by its serial number (a 9-bit character printed in device lable) and security code. 9. Start live view of your camera. 14 Mobile Video Recorder User Manual 4.3 Network Sharing 4.3.1 Set Wi-Fi AP The recorder can work as a wireless router. Othe devices can access network via the recorder. Steps Caution You can only turn on one function between Wi-Fi AP and Wi-Fi. Turning on one of them will turn off the other. 1. Go to Configuration Network Advanced Settings Wi-Fi AP . 2. Check Enable Wi-Fi AP, Enable AP Broadcast, and Enable WLAN HotSpot. 3. Configure hotspot parameters. 1) Enter SSID (hotspot name). 2) Select Security Mode. 3) Enter IP Address and Sub-net Mask. Note The IP address must be in different network segment with TCP/IP address. 4. Check Enable DHCP and enter Start IP Address and End IP Address. 5. Click Save. 4.3.2 Set Network Share Connect a periphral device to your recorder with a network cable. The periphral device can access internet after the recorder succesfully dialed to internet. Steps 1. Go to Configuration Network Basic Settings TCP/IP Lan . 2. Check Enable Network Share. 3. Configure the network parameters for the periphral device. 1) Set its IP address in the same network segment with your recorder. 2) Set its network gateway IP as the recorder IP address. 4. Click Save. The periphral device can access internet after the recorder succesfully dialed to internet. 15 Mobile Video Recorder User Manual Chapter 5 Live View and Configuration 5.1 Live View 5.1.1 Start/Stop Live View Start/stop the live view of cameras. Steps 1. Go to Live View. 2. Click 3. Double click a camera in the camera list to display its live image in selected window. Or click to select window division and click to select a window to display the live view image. to start the live view of all cameras. 4. Double click the camera again to stop its live view. Or click to stop the live view of all cameras. 5.1.2 Split Screen Live view window division is selectable. Window Division Click Paging Click
/
to select live view window division. to turn to previous/next window. 5.1.3 Select Live View Stream The recorder supports main stream and sub-stream. Main stream is used for continuous recording and sub-stream is used for network transmission. Click in camera list to select live view stream. 5.1.4 Manual Capture Capture live view pictures and save them to your computer. Steps 1. Go to Live View. 2. Start live view of a camera. 3. Click
. 16 Mobile Video Recorder User Manual 4. View captured pictures.
- Enter the path popped up in the lower right corner.
- Go to Configuration Local Picture and Clip Settings for the saving path of captured pictures. 5.1.5 Manual Recording Record videos in live view and save them to your computer. Steps 1. Go to Live View. 2. Start live view of a camera. 3. Click to start recording. 4. Click to stop recording. 5. Go to the set saving path to view recorded videos.
- Enter the path popped up in the lower right corner.
- Go to Configuration Local Record File Settings for picture saving path. 5.1.6 Start/Stop Two-Way Audio You can have real-time two-way audio between your computer and the recorder. Before You Start Connect the audio input and output devices to the recorder and computer. Steps 1. Start the live view of a camera. 2. Click Result At computer end, you can hear the audio from recorder. At recorder end, you can hear the audio from computer. 5.1.7 Set Live View Volume Turn on audio and adjust audio volume. Click Drag the slider to adjust volume. to turn on audio. 5.1.8 Full-Screen Live View Display the live view image in full screen. 17 Mobile Video Recorder User Manual Start the live view and click Press Esc to exit from the full-screen mode. to display the live view image in full screen. 5.1.9 Channel-Zero Channel-zero, known as virtual channel, can show the videos from all channels of the recorder, reducing the bandwidth while simultaneously previewing from multi-channel. Steps 1. Go to Configuration Video/Audio Channel-zero . 2. Check Enable Channel-zero Encoding. 3. Select Max. Bitrate and Max. Frame Rate. 4. Click Save. 5. Go to Live View. 6. Double click ZeroChannel 01 in the camera list to start live veiw of channel-zero. 5.2 PTZ Operation Configure PTZ parameters and control PTZ. 5.2.1 Configure PTZ Follow the steps to set PTZ parameters. The configuration of the PTZ parameters should be done before you control the PTZ camera. Before You Start Connect the RS-485 cables of the PTZ camera to EXT.DEV interface of the device. Steps 1. Go to Configuration System System Settings PTZ Config . 2. Select Channel No. of PTZ camera. 3. Configure the parameters of the PTZ camera. All the parameters should be exactly the same with those of the PTZ camera. 4. Click Save. 5.2.2 PTZ Control Panel Go to Live View. Control PTZ camera via PTZ panel. Note PTZ control panel may vary with recorder model. 18 Mobile Video Recorder User Manual Icon Description Icon Description Direction buttons. Zoom -. Focus +. Iris +. Turn on /off light. Auto-scan button. Zoom +. Focus -. Iris -. Start/stop wiper. 5.3 Local Configuration Local configuration refers to the parameters of live view image, videos and captured pictures. Stream Type Select the default live live stream type. Main stream and sub-stream are selectable. Play Performance Shortest Delay: The recorder ensures real-time capacity in priority. Auto: Automatically adjust the live view stream to balance real-time capacity and fluency. Rules Reserved. Image Size Adjust the image aspect ratio. Auto Start Live View Enable: Automatically turn on live view after logged in the recorder. 19 Mobile Video Recorder User Manual Chapter 6 Mobile Device Features 6.1 Timed Shutdown The recorder will automatically start up/shut down according the schedule. Before You Start Wire power cord. For details, refer to quick start guide. Steps 1. Go to Configuration Vehicle Start . 2. Select Auto Work Type as Auto Working. 3. Set the shutdown schedule. For detailed steps, refer to Configure Arming Schedule . 4. Optional: Check Low Power Protect and select Low Power Protect Limit. If the voltage of the recorder reaches the selected threshold, the recorder will shut down automatically. 5. Click Save. 6.2 Delayed Shutdown You can set the shutdown delay time (Vehicle Ignition Startup and Shutdown) for the recorder. Before You Start Wire power cord. For details, refer to quick start guide. Steps 1. Go to Configuration Vehicle Start . 2. Select Auto Work Type as Halt Delay. 3. Select Delay Time. 4. Click Save. 5. Optional: Check Low Power Protect and select Low Power Protect Limit. If the voltage of the recorder reaches the selected percentage, the recorder will shut down automatically. 6.3 Configure Satellite Positioning The built-in GNSS module supports GPS (Global Positioning System), enabling device positioning and speed limit alarm. Before You Start Install the positioning antenna. Steps 1. Go to Configuration Vehicle Position Settings . 2. Select Position Module. 20 Mobile Video Recorder User Manual Built-in Obtain data from the satellite positioning module built in the recorder. Intelligent Display Terminal Obtain data from display terminal. 3. Select Locating Module. 4. Optional: Check Enable of Satellite Timing to synchronize recorder time with satellite time. 5. Configure speed limit. 1) Select Speed Units. 2) Enter Speed Limit of Alarm. If vehicle speed exceeds the set value, the recorder will alarm. 6. Check the channels you want the positioning information to be displayed. The positioning information will be displayed in the live view and playback mode of the selected channel. 7. Configure linkage actions. If you want the speeding vehicle to trigger the speed alarm, check Trigger Alarm Output. If you want the speeding vehicle to trigger the system to beep, check Audible Warning. 8. Click Save. 6.4 Configure G-Sensor Alarm G-Sensor detects and records acceleration information in 3-axial (X, Y, Z) directions. Before You Start Connect a G-sensor to the recorder. Steps 1. Go to Configuration Vehicle G-Sensor . 2. Select modeule according to actual situation.
- External: The G-sensor is connected to the device through RS-232/RS-485 interface.
- Built-in: The G-sensor is a built-in module of the device. 3. Set the limit value for acceleration alarm in X, Y and Z directions. Note X, Y and Z represent the direction of acceleration and the unit of alarm value is G (G=9.8 m/s2). During driving, the recorder will alarm when acceleration of any direction exceeds the set value. 4. Set the linkage actions for acceleration alarm, including Audible Warning and Alarm Output. 5. Click Save. 21 Mobile Video Recorder User Manual 6.5 Configure Sensor-in Sensor-in detects and records the vehicle's driving information, including pedal braking, turning left/right, reversing, etc. Before You Start Connect the recorder sensor-in interface and vehicle corresponding interface. For details, refer to quick user guide. Steps 1. Go to Configuration Vehicle Sensor-In . 2. Select Trigger Level and Pop Channel according to actual situation. The the image of selected channel will be displayed in full screen when sensor-in is triggered. 3. Click Save. 22 Mobile Video Recorder User Manual Chapter 7 Camera Management 7.1 Configure Encoding Parameters Configure encoding parameters to adjsut live view image and video parameters. Go to Configuration Video/Audio Video . In good network situation, you can set high resolution and bitrate to improve image quality. In bad network situation, you can set low resolution, bitrate, and frame rate to get fluent image. 7.2 Image Settings 7.2.1 Set Image Parameters You can adjust image parameters including bightness, contrast, etc. Steps 1. Go to Configuration Image Display Settings . 2. Select Channel No. 3. Select Scene according to actual situation. 4. Adjust image parameters as desired. 7.2.2 Set Mirror Type You can enable mirror image and set mirror type to get sutible image. Steps 1. Go to Configuration Image Display Settings . 2. Select Mirror Type as desired. Note The function varies with recorder model. 7.2.3 Restore Default Parameters You can restore image parameters to defaults. Go to Configuration Image Display Settings , select Channel No., and click Default. 23 Mobile Video Recorder User Manual 7.3 Set OSD Parameters Configure the camera name, OSD (On Screen Display) settings, etc. Steps 1. Go to Configuration Image OSD Settings . 2. Select Channel No. 3. Enter Camera Name, select Time Format and Date Format. 4. Optional: Check Display Name, Dispaly Date, and Display Week as your desire. 5. Set OSD Display Mode. 6. Optional: To display text on OSD, check one text overlay and enter text. 7. Drag the red frame on live view window to adjust OSD position. 8. Click Save. Result The check display contents will be overlaied on the live view image and videos. 7.4 Set Privacy Mask The privacy mask can be used to protect personal privacy by concealing parts of the image from view or recording with a masked area. Up to four privacy mask areas are supported for each channel. Steps 1. Go to Configuration Image Privacy Mask . 2. Select Channel No. 3. Check Enable Privacy Mask. 4. Draw detection area. 1) Click Draw Area. 2) In preview area, drag to draw the detection area. 3) Click Stop Drawing. 5. Click Save. Result The image of drawn area will be shield in the live view and videos. 24 Mobile Video Recorder User Manual Chapter 8 Driving Behavior Configuration The function analyzing driver's behavior, including smoking, fatigue driving, talking on phone, etc. The recorder will trigger warning when these behaviors are detected. 8.1 Smart Device Driving Behavior Configuration Only the recorder with A in model name supports driving behavior detection function. One recorder supports analyzing one channel at a time. 8.1.1 Configuration Calibrate Camera Position Calibrate network camera position before enabling driving behavior detection. Before You Start Add the network camera in your recorder. Steps 1. Go to Configuration VCA Driving Behaviors IPC Position Calibration 2. Select Channel No. 3. Adjust the network camera position to make the driver face image appear in the red frame and his chin is above the yellow line. Configure Driving Behavior Analysis Set the driving behavior analysis parameters according to actual situation to lower false detection rate. Steps 1. Go to Configuration VCA Driving Behaviors Driving Behaviors . 2. Select Camera No. 3. Check behaviors to analyze and configure their parameters. Alarm Time Device alarms when the corresponding driving behavior lasts for the set time. Confidence Interval Available for on-the-phone detection and smoking detection. The higher the value is, the lower the false detection rate. You are recommended to use the default value. 25 Mobile Video Recorder User Manual Stop Detections when Driving in Low-Speed The feature is valid when GPS positioning succeeded. When the vehicle speed is lower than the set value, all the driving behavior analyses will stop. Voice Alarm When it is checked, device will send out voice alarm when a checked behavior is detected. Note One recorder supports analyze driving behavior for one channel at a time. Enabling the driving behavior analysis will disable driving behavior analysis of other channels. 4. Click Save. Result When a concerned driving behavior is detected, the connected intercom will automatically send out audio broadcast. 8.1.2 Play Videos and Pictures We take the example of playing videos to describe the steps. Steps 1. Go to Playback. 2. Select a channel in channel list. 3. Click Event Search. 4. Select Event Type as Driver Behavior. 5. Set search conditions. 6. Click Search. 7. Select videos to play. 8.2 Other Device Driving Behavior Configuration For the recorder supports network camera, when the recorder and a smart terminal connects the same network camera, and the smart terminal is added to the recorder, the recorder will receive driving behavior analysis from the smart terminal. 8.2.1 Connect Smart Terminal Before You Start Add the same network camera to both smart terminal and recorder. Steps 1. Go to Configuration Vehicle Smart Terminal Access . 2. Check Enable. 26 Mobile Video Recorder User Manual 3. Enter smart terminal information. 4. Click Save. 8.2.2 Set Arming In the set arming period, the recorder will trigger specified linkage method when the concerned driving behavior is detected. Steps 1. Go to Configuration Event Basic Event Driving Behaviors . 2. Select Channel No. and Driving Behaviors. The channel should be network camera that connected to both the added smart terminal and the recorder. 3. Check Enable. 4. Configure arming schedule. For detailed steps, refer to Configure Arming Schedule . 5. Configure linkage method. For detailed steps, refer to Configure Linkage Actions . 6. Click Save. 27 Mobile Video Recorder User Manual Chapter 9 Events and Alarms 9.1 Configure Motion Detection Alarm When motion detection alarm is configured, once a motion event is detected, the device starts to record and multiple linkage actions will be triggered. Steps 1. Go to Configuration Event Basic Event Motion Detection . 2. Select Channel No. 3. Draw detection area. 1) Click Draw Area. 2) In preview area, drag to draw the detection area. 3) Click Stop Drawing. 4. Configure arming schedule. For detailed steps, refer to Configure Arming Schedule . 5. Configure linkage method. For detailed steps, refer to Configure Linkage Actions . 6. Set Sensitivity. 7. Click Save. 9.2 Configure Video Loss Alarm When the recorder cannot receive video signal from the analog cameras, the video loss alarm will be triggered. Linkage actions, including audible warning and alarm output, can be set to respond. Steps 1. Go to Configuration Event Basic Event Video Loss . 2. Check Enable Video Loss Detection. 3. Configure arming schedule. For detailed steps, refer to Configure Arming Schedule . 4. Configure linkage method. For detailed steps, refer to Configure Linkage Actions . 5. Click Save. 9.3 Configure Video Tampering Alarm A tampering alarm is triggered when the camera is covered and the monitoring area cannot be viewed. Linkage actions, including audible warning, alarm output, can be set to respond. Steps 1. Go to Configuration Event Basic Event Video Tamptering . 2. Select Channel No. 3. Draw detection area. 1) Click Draw Area. 2) In preview area, drag to draw the detection area. 28 Mobile Video Recorder User Manual 3) Click Stop Drawing. 4. Configure arming schedule. For detailed steps, refer to Configure Arming Schedule . 5. Configure linkage method. For detailed steps, refer to Configure Linkage Actions . 6. Set Sensitivity. 7. Click Save. 9.4 Configure Alarm Input Configure the settings for alarm input, including trigger level, arming schedule and alarm linkage actions, etc. Before You Start Connect an alarm device to your recorder. Steps 1. Go to Configuration Event Basic Event Alarm Input . 2. Select Alarm Input No. and enter Alarm Name. 3. Select Alarm Type according to alarm device type. 4. Check Enable Alarm Input Handling. 5. Configure arming schedule. For detailed steps, refer to Configure Arming Schedule . 6. Configure linkage method. For detailed steps, refer to Configure Linkage Actions . 7. Optional: Click Copy to and select desired channels to o copy the above settings to other alarm inputs. 8. Click Save. 9.5 Configure Alarm Output Configure the arming schedule, alarm duration time and alarm name for alarm output. Before You Start Connect alarm output device to your recorder. For details, refer to installation guide. Steps 1. Go to Configuration Event Basic Event Alarm Output . 2. Select Alarm Output No. and enter Alarm Name. 3. Select Delay to set dwell time. Alarm output will continue for the set time. 4. Configure arming schedule. For detailed steps, refer to Configure Arming Schedule . 5. Optional: Click Manual Alarm to trigger alarm manually. Click Stop Alarm to stop manual alarm. 6. Optional: Click Copy to and select desired channels to o copy the above settings to other alarm outputs. 7. Click Save. 29 Mobile Video Recorder User Manual 9.6 Configure Exception Alarm Configure alarms which are triggered by exceptions to take necessary actions in time. Steps 1. Go to Configuration Event Basic Event Exception . 2. Select Exception Type. 3. Configure linkage method. For detailed steps, refer to Configure Linkage Actions . 4. Click Save. 9.7 Configure Arming Schedule Steps 1. Drag in time line to draw a arming period. 2. Adjust the set arming period.
- Click a period and adjust its length.
- Click a period, enter start time and end time, and click Save.
- Click Delete All to delete all periods. Note Up to 8 time periods can be set for each day and each of the time periods cannot be overlapped. 3. Optional: Click Copy to and select desired days to copy the above settings to other days. 4. Click Save. 9.8 Configure Linkage Actions Check Linkage Method, select Settings, check the linkage actions needed, click Apply and OK. Note Linkage actions vary with event type. 9.8.1 Trigger Recording To trigger recording when an event occurs, check Trigger Recording. 9.8.2 Trigger Audible Warning To generate an audible warning when an event occurs, check Trigger Audible Warning. 30 Mobile Video Recorder User Manual 9.8.3 Full Screen Monitoring To display image from the arming channel in full screen, check Full Screen Monitoring. 9.8.4 Trigger Alarm Output To trigger the alarm of alarm output device connected to the recorder, check Trigger Alarm Output. 31 Mobile Video Recorder User Manual Chapter 10 Security 10.1 User Account Management You can add and delete users, and modify the password and permission of users. Steps 1. Go to Configuration System User Management . 2. Click Add. 3. Edit new user parameters and click OK to create the user. Note We highly recommend you to create a strong password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product. Delete Modify Select a user and click Delete to delete the user. Select a user and click Modify to modify the user information. 10.2 Set Security Question If you forgot admin password, you can reset password by answering security questions. Follow the steps to set security questions. Before You Start Your computer and recorder must be in the same network segment. Steps 1. Go to Configuration System User Management . 2. Click Security Question. 3. Enter Admin Password. 4. Set security questions. 5. Click OK. Result If you forgot admin password, you can visit the recorder via computer in the same network segment with your recorder and click Forgot Password to reset password. 32 Mobile Video Recorder User Manual 10.3 Configure Whitelist Only the trusted IP addresses on the white list can access the device via the network. Steps 1. Go to Configuration System Security White List . 2. CheckEnable White List. 3. Click Add and enter desired IP Address.
- Select an IP address and click Modify to edit the IP address.
- Select an IP address and click Delete to delete the IP address. 4. Click Save. 10.4 SSH Settings SSH is disabled by default for security reasons. This setting is reserved for professional maintenance personnel only. 33 Mobile Video Recorder User Manual Chapter 11 Maintenance 11.1 View System Information You can view your recorder system information and edit recorder name and record number. Go to Configuration System System Settings Basic Information to view the recorder information. You can edit Device Nmae and Device No. 11.2 Search Log File You can view and export logs saved in the recorder storage media. Go to Configuration System Maintenance Log to search or export logs. 11.3 Upgrade the System You are recommended to upgrade the recorder with the help of professional technical support. Before You Start Save the upgrade file in computer. Steps 1. Go to Configuration System Maintenance Upgrade & Maintenance . 2. Click Browse and select upgrade file. 3. Click Upgrade and click OK in popup message box to start upgrading. Caution The upgrading process will be 1 to 10 minutes, please don't disconnect power to the recorder during the process. The recorder reboots automatically after upgrading. 11.4 Rebooting Reboot your recorder via menu instead of disconnecting power from the recorder. Go to Configuration System Maintenance Upgrade & Maintenance . Click Reboot and click OK in popup message box to start rebooting.. 11.5 Restore Default Settings If your recorder is abnormal, you can restore recorder to defaults setttigs. 34 Mobile Video Recorder User Manual Go to Configuration System Maintenance Upgrade & Maintenance . Restore Restore all parameters, except the network (including IP address, subnet mask, gateway, MTU, NIC working mode, default route, server port, etc.) and user account parameters, to the factory default settings. Default Restore all parameters to the factory default settings. 11.6 Export Configuration File The configuration files of the recorder can be exported to your computer for backup. Steps 1. Go to Configuration System Maintenance Upgrade & Maintenance . 2. Click Device Parameters and select the configuration file saving path. 11.7 Import Configuration File The configuration file of one device can be imported to multiple devices if they are to be configured with the same parameters. Steps Caution Only devices of the same model can share configuration file. 1. Go to Configuration System Maintenance Upgrade & Maintenance . 2. Click Browse of Import Config. File and select configuration file. 3. Click Import and click OK in popup message box to start importing. 11.8 Configure DST Settings Configure DST (Daylight Saving Time) settings for the system. Steps 1. Go to Configuration System System Settings Time Settings . 2. Check Enable DST. 3. Set Start Time and End Time for DST. 4. Select DST Bias. 5. Click Save. 35 Mobile Video Recorder User Manual 11.9 Configure Local Output You can configure local output and resolution remotely. Go to Configuration System System Settings Menu Output to configure Menu Output and Resolution. Note The function varies with model. 11.10 Configure RS-232 To debug recorder via serial port or connect serial device, you can configure RS-232 parameters. Before You Start Connect a serial device to your recorder RS-232 interface. Steps 1. Go to Configuration System System Settings Serial Config . 2. Select COM port the serial device connects to. 3. EditBaudrate, Data Bit, Stop Bit, Parity, and Flow Control. 4. Select Usage. Console Connect a computer to the recorder through the computer serial port. Recorder parameters can be configured by using software such as HyperTerminal. The serial port parameters must be the same as of the recorder when connecting with the computer serial port. Transparent Channel Connect a serial device directly to the recorder. The serial device will be controlled remotely by the computer through the network and the protocol of the serial device. If alarm button is connected, select RS-232 usage as Transparent Channel. 5. Click Save. 36 Mobile Video Recorder User Manual Chapter 12 Local Menu Operation Connect a display and a mouse to recorder, you can operate the recorder locally. 12.1 IP Camera Adding The section is only available for the recorder that supports network camera. 12.1.1 Activate IP Camera Before adding an IP camera, activate it by setting a password for it. Before You Start Connect the IP camera to IP camera interface in the recorder rear panel. Steps 1. Go to Menu Other Settings IPC Settings . 2. Click Manual Management. 3. Select an inactivated IP camera. 4. Activate the selected IP camera.
- Click Quick Active. The IP camera password will be set as the same with the device password.
- Click Manu Active and enter the same password in New Password and Confirm. Caution We highly recommend you to create a strong password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product. 12.1.2 Add IP Camera Before You Start The IP camera is active. Steps 1. Select Menu Other Settings IPC Settings 2. Uncheck Auto Add and click Manage IP Camera. 3. Edit camera IP address. 1) Select an IP camera and click Edit. 2) Enter an IP address that is in the same network segment with the recorder. 37 Mobile Video Recorder User Manual 4. Add the IP camera. 1) Click ManuAdd. 2) Select IP channel No. for the IP camera. 3) Edit the required information. 4) Click OK. 12.1.3 Edit IP Camera You can edit or delete added IP cameras. Steps 1. Go to Menu Other Settings IPC Settings . 2. Optional: You can change the parameters of the added IP cameras. 1) Select an IP camera. 2) Edit the parameters. If you change the IP address, you will connect to another IP camera. 3) Click OK. 3. Optional: Select an IP camera, click Delete to delete the IP camera. 12.2 Recording To record the videos for connected cameras, you need to install a storage media and format it, and configure the recording schedule. 12.2.1 Format Storage Media A newly installed storage media must be formatted before it can be used. Before You Start Install storage media. Steps 1. Go to Menu Storage . 2. Check storage media to format. 3. Click Format. After format, the storage media Status should be Normal. 12.2.2 Configure Recording Schedule All-day recording is on by default. Device will start and stop recording according to the configured recording schedule. Before You Start Install storage media and format it. 38 Mobile Video Recorder User Manual Steps 1. Go to Menu Basic Settings Record . 2. Select the camera to set recording schedule. 3. Click Set of Schedule. 4. Check Enable Schedule. 5. Select the day from the dropdown list for settings. 6. Configure all day schedule or custom schedule.
- Check All Day to enable all-day recording, and then select the recording type from the drop-
- Uncheck All Day, customize the time period for recording, and select the recording type for down list. each time period. Note Up to 8 time periods can be set for each day and each of the time periods cannot be overlapped. 7. Click OK. 12.3 Playback You can search and play back the videos stored on the recorder. Steps 1. Go to Menu Video Search . 2. Select Search Mode. General Normal videos. Event Motion detection, alarm, motionalarm, motion&alarm videos. 3. Select Camera, Video Type, Start Time, and End Time. 4. Click Search. 5. Select a video and click Play. 12.4 Back up Back up the videos stored on the recorder. Before You Start Connect a USB storage device to your recorder. Steps 1. Go to Menu Video Search . 2. Select Search Mode. 39 Mobile Video Recorder User Manual General Normal videos. Event Motion detection, alarm, motionalarm, motion&alarm videos. 3. Select Camera, Video Type Start Time, and End Time 4. Click Search. 5. Select the videos and click Export. Note The number of USB interface varies with recorder model. If your recorder contains only one USB interface, you can back up videos via remote control or touchscreen. 40 UD11292B
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2019-04-18 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | Original Equipment |
2 | 2412 ~ 2462 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2019-04-18
|
||||
1 2 | Applicant's complete, legal business name |
Hangzhou Hikvision Digital Technology Co., Ltd.
|
||||
1 2 | FCC Registration Number (FRN) |
0024149825
|
||||
1 2 | Physical Address |
No. 555 Qianmo Road, Binjiang District
|
||||
1 2 |
Hangzhou, N/A 310052
|
|||||
1 2 |
China
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
U******@SGS.COM
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
2ADTD
|
||||
1 2 | Equipment Product Code |
5604SD
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
X******** Z********
|
||||
1 2 | Telephone Number |
+86-5********
|
||||
1 2 | Fax Number |
+86-5********
|
||||
1 2 |
z******@hikvision.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | NII - Unlicensed National Information Infrastructure TX | ||||
1 2 | DTS - Digital Transmission System | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Digital Video Recorder | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Power Output listed is conducted. This transmitter must be professionally installed as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz, 40 MHz and 80MHz bandwidth mode. | ||||
1 2 | Power Output listed is conducted. This transmitter must be professionally installed as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz, 40 MHz bandwidth mode. | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
SGS-CSTC Standards Technical Services Co.,Ltd.
|
||||
1 2 | Name |
L**** Y******
|
||||
1 2 | Telephone Number |
+86 (********
|
||||
1 2 |
l******@sgs.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15E | CC | 5745 | 5825 | 0.026 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15E | CC | 5755 | 5795 | 0.016 | |||||||||||||||||||||||||||||||||||
1 | 3 | 15E | CC | 5775 | 5775 | 0.012 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 2412 | 2462 | 0.023 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15C | CC | 2422 | 2452 | 0.011 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC