all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 1.75 MiB | June 15 2021 | |||
1 |
|
Internal photo | Internal Photos | 2.23 MiB | June 15 2021 | |||
1 |
|
External photo | External Photos | 485.84 KiB | June 15 2021 | |||
1 |
|
Label | ID Label/Location Info | 104.98 KiB | June 15 2021 | |||
1 |
|
Applicant Declaration Letter | Cover Letter(s) | 130.02 KiB | June 15 2021 | |||
1 |
|
Auth letter | Cover Letter(s) | 39.56 KiB | June 15 2021 | |||
1 | Block diagram | Block Diagram | June 15 2021 | confidential | ||||
1 |
|
Confidentiality FCC | Cover Letter(s) | 87.61 KiB | June 15 2021 | |||
1 |
|
MCL | Cover Letter(s) | 120.46 KiB | June 15 2021 | |||
1 | Operational description | Operational Description | June 15 2021 | confidential | ||||
1 | Schematics | Schematics | June 15 2021 | confidential | ||||
1 |
|
Test report | Test Report | 1.02 MiB | June 15 2021 | |||
1 |
|
Test setup photo | Test Setup Photos | 593.77 KiB | June 15 2021 |
1 | User Manual | Users Manual | 1.75 MiB | June 15 2021 |
Face Recognition Door Station with 8-inch Screen User Manual Face Recognition Door Station with 8-inch Screen User Manual Legal Information About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the company website Please use this Manual with the guidance and assistance of professionals trained in supporting the Product. Trademarks Acknowledgement Trademarks and logos mentioned are the properties of their respective owners. LEGAL DISCLAIMER TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED AS IS AND WITH ALL FAULTS AND ERRORS. OUR COMPANY MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL OUR COMPANY BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF OUR COMPANY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND OUR COMPANY SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR i Face Recognition Door Station with 8-inch Screen User Manual OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, OUR COMPANY WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS. Data Protection During the use of device, personal data will be collected, stored and processed. To protect data, the development of our devices incorporates privacy by design principles. For example, for device with facial recognition features, biometrics data is stored in your device with encryption method;
for fingerprint device, only fingerprint template will be saved, which is impossible to reconstruct a fingerprint image. As data controller, you are advised to collect, store, process and transfer data in accordance with the applicable data protection laws and regulations, including without limitation, conducting security controls to safeguard personal data, such as, implementing reasonable administrative and physical security controls, conduct periodic reviews and assessments of the effectiveness of your security controls. ii Face Recognition Door Station with 8-inch Screen User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Danger Caution Note Indicates a hazardous situation which, if not avoided, will or could result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results. Provides additional information to emphasize or supplement important points of the main text. iii Face Recognition Door Station with 8-inch Screen User Manual Safety Instruction Warning All the electronic operation should be strictly compliance with the electrical safety regulations, fire prevention regulations and other related regulations in your local region. Please use the power adapter, which is provided by normal company. The power consumption cannot be less than the required value. Please make sure that the power has been disconnected before you wire, install or dismantle the device. If the product does not work properly, please contact your dealer or the nearest service center. Never attempt to disassemble the device yourself. (We shall not assume any responsibility for problems caused by unauthorized repair or maintenance.) Do not drop the device or subject it to physical shock, and do not expose it to high electromagnetism radiation. Avoid the equipment installation on vibrations surface or places subject to shock (ignorance can cause equipment damage). Do not place the device in extremely hot (refer to the specification of the device or the detailed operating temperature), cold, dusty or damp locations. The device shall be kept from rain and moisture. The device shall be kept from explosives. Keep surfaces of the device clean and dry. Avoid contact with exposed circuits. Do not touch the exposed contacts and components when the product is powered on. Caution Caution Keep the device away from children and out of reach. CAUTION: Risk of explosion if the battery is replaced by an incorrect type. Improper replacement of the battery with an incorrect type may defeat a safeguard (for example, in case of some lithium battery types). Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery, which may result in an explosion. iv Face Recognition Door Station with 8-inch Screen User Manual Do not leave the battery in an extremely high temperature surrounding environment, which may result in an explosion or leakage of flammable liquid or gas. Do not subject the battery to extremely low air pressure, which may result in an explosion or the leakage of flammable liquid or gas. Used batteries may result in pollution to the environment. Dispose of used batteries according to the instructions provided by the battery manufacturer. v Face Recognition Door Station with 8-inch Screen User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body. FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. vi Face Recognition Door Station with 8-inch Screen User Manual EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, RE Directive 2014/53/EU,the RoHS Directive 2011/
65/EU 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see:www.recyclethis.info Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
this device may not cause interference, and 1. 2. this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorise aux deux conditions suivantes :
vii Face Recognition Door Station with 8-inch Screen User Manual 1. 2. l'appareil ne doit pas produire de brouillage, et l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformment la rglementation d'Industrie Canada, le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body. Cet quipement doit tre install et utilis une distance minimale de 20 cm entre le radiateur et votre corps. viii Face Recognition Door Station with 8-inch Screen User Manual Contents 1 Appearance ................................................................................................ 1 1.1 Door Station ...................................................................................................... 1 1.2 Door Station with Keypad Module .................................................................... 2 1.3 Door Station with Fingerprint Module .............................................................. 3 1.4 Door Station with 4G Module ........................................................................... 4 2 Terminal and Wiring Description ................................................................ 6 3 Installation .................................................................................................. 7 3.1 Install Door Station ........................................................................................... 7 3.1.1 Door Station Installation Accessories ....................................................... 7 3.1.2 Surface Mounting ..................................................................................... 9 3.1.3 Flush Mounting ....................................................................................... 10 3.2 Install Door Station with Keypad Module ....................................................... 11 3.2.1 Door Station with Keypad Module Installation Accessories ................... 11 3.2.2 Surface Mounting ................................................................................... 13 3.2.3 Flush Mounting ....................................................................................... 14 3.3 Install Door Station with Fingerprint Module ................................................. 15 3.3.1 Door Station with Fingerprint Module Installation Accessories ............. 15 3.3.2 Surface Mounting ................................................................................... 17 3.3.3 Flush Mounting ....................................................................................... 18 3.4 Door Station with 4G Module Installation Accessories ................................... 19 3.4.1 Door Station with 4G Module Installation Accessories .......................... 20 3.4.2 Surface Mounting ................................................................................... 21 ix Face Recognition Door Station with 8-inch Screen User Manual 3.4.3 Flush Mounting ....................................................................................... 22 4 Activation ................................................................................................. 24 4.1 Activate Device Locally .................................................................................... 24 4.2 Activate Device via Web .................................................................................. 24 4.3 Activate Device via Client Software ................................................................. 25 4.4 Activate Device via Batch Configuration Tool .................................................. 25 5 Door Station Local Operation ................................................................... 26 5.1 Door Station Local Configuration .................................................................... 26 5.1.1 Edit Network Parameters ........................................................................ 26 5.1.2 Door Station Settings .............................................................................. 26 5.1.3 User Management .................................................................................. 27 5.1.4 Search Version ........................................................................................ 28 5.2 Video Intercom Operation .............................................................................. 28 5.2.1 Call Resident ........................................................................................... 28 5.2.2 Call Center .............................................................................................. 29 5.3 Unlock Door .................................................................................................... 30 5.3.1 Unlock by Password ................................................................................ 30 5.3.2 Unlock by Face ........................................................................................ 30 5.3.3 Unlock by Presenting Card ...................................................................... 30 5.3.4 Unlock by QR Code ................................................................................. 31 6 Remote Configuration via Web ................................................................ 32 6.1 Live View ......................................................................................................... 32 6.2 Person Management ....................................................................................... 32 6.3 Number Settings ............................................................................................. 32 x Face Recognition Door Station with 8-inch Screen User Manual 6.4 Device Management ....................................................................................... 33 6.5 Parameters Settings ........................................................................................ 33 6.5.1 Local Settings .......................................................................................... 34 6.5.2 System Configuration ............................................................................. 35 6.5.3 Network Settings .................................................................................... 38 6.5.4 Video & Audio Settings ........................................................................... 43 6.5.5 Image Settings ........................................................................................ 45 6.5.6 Event Settings ......................................................................................... 47 6.5.7 Two-way Audio Configuration ................................................................ 50 6.5.8 Access Control Settings ........................................................................... 52 6.5.9 Smart Settings ......................................................................................... 55 6.5.10 Theme Settings ..................................................................................... 56 7 Remote Configuration via Client Software ............................................... 58 7.1 Edit Device Network Parameters .................................................................... 58 7.2 Add Device ...................................................................................................... 58 7.2.1 Add Online Device .................................................................................. 58 7.2.2 Add Device via IP Address ...................................................................... 59 7.2.3 Add Device via IP segment ..................................................................... 59 7.2.4 Add Devices in Batch .............................................................................. 59 7.2.5 Add Device Via EHome ........................................................................... 60 7.3 Local Configuration via Client Software .......................................................... 60 7.4 Device Management ....................................................................................... 60 7.5 Live View ......................................................................................................... 61 7.6 Intercom Organization Structure Configuration .............................................. 61 xi Face Recognition Door Station with 8-inch Screen User Manual 7.6.1 Add Organization .................................................................................... 61 7.6.2 Modify and Delete Organization ............................................................. 61 7.7 Person Management ....................................................................................... 61 7.7.1 Add Person ............................................................................................. 62 7.7.2 Modify and Delete Person ...................................................................... 63 7.7.3 Import and Export Person Information .................................................. 63 7.7.4 Get Person Information .......................................................................... 64 7.7.5 Issue Card in Batch ................................................................................. 64 7.7.6 Permission Settings ................................................................................. 65 7.8 Video Intercom Settings .................................................................................. 65 7.8.1 Video Intercom ....................................................................................... 66 7.8.2 Search Video Intercom Information ....................................................... 67 7.8.3 Upload Arming Information ................................................................... 68 8 Batch Configuration Tool .......................................................................... 70 8.1 Create the Organization Structure .................................................................. 70 8.1.1 Create Community Structure .................................................................. 70 8.1.2 Door Station Flash .................................................................................. 70 8.2 Upgrade in Batch ............................................................................................. 73 8.2.1 Add Devices to be Upgraded .................................................................. 73 8.2.2 Upgrade Device ...................................................................................... 75 xii Face Recognition Door Station with 8-inch Screen User Manual 1 Appearance 1.1 Door Station Note Refers to the specific model for the appearance of the device. Figure 1-1 Door Station Table 1-1 Appearance Description No. Description No. Description Wiring Terminal Network Interface TAMPER Loudspeaker IR Supplement Light Debugging Port Note The debugging port is used for debugging only. Microphone 10 MicroUSB Interface 1 2 3 4 7 8 9 1 Face Recognition Door Station with 8-inch Screen User Manual No. Description 5 6 Camera CMOS No. 11 Description SD Card Slot 1.2 Door Station with Keypad Module Note Refers to the specific model for the appearance of the device. Figure 1-2 Door Station with Keypad Module Table 1-2 Appearance Description No. Description No. Description 1 2 3 Wiring Terminal Network Interface Button TAMPER IR Supplement Light Loudspeaker 7 8 9 2 Face Recognition Door Station with 8-inch Screen User Manual No. 4 5 6 Description Microphone Camera CMOS No. 10 11 12 Description Debugging Port Note The debugging port is used for debugging only. MicroUSB Interface SD Card Slot 1.3 Door Station with Fingerprint Module Note Refers to the specific model for the appearance of the device. Figure 1-3 Door Station with Fingerprint Module 3 Face Recognition Door Station with 8-inch Screen User Manual Table 1-3 Appearance Description No. Description No. Description 1 2 3 4 5 6 7 Wiring Terminal Network Interface IR Supplement Light Microphone Camera CMOS Button Fingerprint Module TAMPER Loudspeaker Debugging Port Note The debugging port is used for debugging only. MicroUSB Interface SD Card Slot 1.4 Door Station with 4G Module Note Refers to the specific model for the appearance of the device. 8 9 10 11 12 13 4 Face Recognition Door Station with 8-inch Screen User Manual Figure 1-4 Door Station with 4G Module Table 1-4 Appearance Description No. Description No. Description Wiring Terminal Network Interface TAMPER Loudspeaker IR Supplement Light Debugging Port 1 2 3 4 5 6 Microphone Camera CMOS Note The debugging port is used for debugging only. MicroUSB Interface SD Card Slot 7 8 9 10 11 5 Face Recognition Door Station with 8-inch Screen User Manual 2 Terminal and Wiring Description Door station can be wired to alarm input interface, alarm input interface, door lock, door contact and so on. Figure 2-1 Terminal and Wiring Description 6 Face Recognition Door Station with 8-inch Screen User Manual 3 Installation 3.1 Install Door Station Note Gang box is required for the installation of door station. The power supply the door station supports is 12 VDC. Please make sure your power supply matches your door station. Complete wiring during installation. Refers toTerminal and Wiring Description for wiring details. Make sure all the related equipment is power-off during the installation. Installation Location: the lens of the device shall be 1.5 meters away from the ground. 3.1.1 Door Station Installation Accessories 7 Face Recognition Door Station with 8-inch Screen User Manual Mounting Plate Figure 3-1 Mounting Plate Note The dimension of the mounting plate is 233 mm (W) 112.4 mm (H) 21 mm (D). 8 Face Recognition Door Station with 8-inch Screen User Manual Gang Box Figure 3-2 Gang Box Note mm (D). The dimension of the gang box is 236.9 mm (W) 128.4 mm (H) 40.8 The installation hole should be bigger than the actual size. The suggested dimension of the installation hole is 237.5 mm (W) 128.9 mm (H) 41.3 mm (D). 3.1.2 Surface Mounting Steps 1. Paste the mounting template on the wall according to the installation location requirements. Drill holes according to the location of the screw holes of the mounting template, and insert the expansion bolts into the screw holes. 2. Fix the mounting plate to the wall with 4 supplied screws. 3. Fix the device to the mounting plate, and fix the device with the set screws. 9 Face Recognition Door Station with 8-inch Screen User Manual Note Do not touch the SD card slot and other devices during the process of plugging in and unplugging the power interface. Apply Silicone sealant among the joints between the device and the wall
(except the lower side) to keep the raindrop from entering. Figure 3-3 Surface Mounting 3.1.3 Flush Mounting Steps 1. Cave an installation hole in the wall. The suggested dimension of the installation hole is 237.5 mm (W) 128.9 mm (H) 41.3 mm (D). Pull the cables out from the wall. Insert the gang box into the installation hole, and mark the gang box screw holes' position with a marker. 2. Take out the gang box. Drill 4 holes according to the marks on the wall, and insert the expansion sleeves into the screw holes. Fix the gang box with 4 expansion bolts. 3. Insert the door station into the gang box, and fix it with set screws. Note Do not touch the SD card slot and other devices during the process of plugging in and unplugging the power interface. 10 Face Recognition Door Station with 8-inch Screen User Manual Figure 3-4 Flush Mounting 3.2 Install Door Station with Keypad Module Note Gang box is required for the installation of door station. The power supply the door station supports is 12 VDC. Please make sure your power supply matches your door station. Complete wiring during installation. Refers to Terminal and Wiring Description for wiring details. Make sure all the related equipment is power-off during the installation. Installation Location: the lens of the device shall be 1.5 meters away from the ground. 3.2.1 Door Station with Keypad Module Installation Accessories 11 Face Recognition Door Station with 8-inch Screen User Manual Mounting Plate Figure 3-5 Mounting Plate Note The dimension of the mounting plate is 233 mm (W) 112.4 mm (H) 21 mm (D). 12 Face Recognition Door Station with 8-inch Screen User Manual Gang Box Figure 3-6 Gang Box Note mm (D). The dimension of the gang box is 312.9 mm (W) 128.4 mm (H) 40.8 The installation hole should be bigger than the actual size. The suggested dimension of the installation hole is 313.5 mm (W) 128.9 mm (H) 41.3 mm (D). 3.2.2 Surface Mounting 13 Face Recognition Door Station with 8-inch Screen User Manual Steps 1. Loosen splice set screws, and separate the host from the keypad module. Paste the mounting template on the wall according to the installation location requirements. Drill holes according to the location of the screw holes of the drill template, and install the expansion bolts into the screw holes. 2. Fix the mounting plate to the wall with 4 supplied screws. 3. Fix the device to the mounting plate, and fix the device with the set screws. 4. Put the Silicone sealant sleeve at the USB part of the keypad module in place. Align the keypad module with the USB interface and install it into the device, and fix it with splice set screws. Note Do not touch the SD card slot and other devices during the process of plugging in and unplugging the power interface. Apply Silicone sealant among the joints between the device and the wall
(except the lower side) to keep the raindrop from entering. Figure 3-7 Surface Mounting 3.2.3 Flush Mounting Steps 1. Cave an installation hole in the wall. The suggested dimension of the installation hole is 313.5 mm (W) 128.9 mm (H) 41.3 mm (D). Pull the cables out from the wall, insert the gang box into the installation hole, and mark the gang box screw holes position with a marker. 14 Face Recognition Door Station with 8-inch Screen User Manual 2. Take out the gang box. Drill 4 holes according to the marks on the wall, and insert the expansion sleeves into the screw holes. Fix the gang box with 4 expansion bolts. 3. Insert the door station into the gang box, and fix it with set screws. Note Do not touch the SD card slot and other devices during the process of plugging in and unplugging the power interface. Figure 3-8 Flush Mounting 3.3 Install Door Station with Fingerprint Module Note Gang box is required for the installation of door station. The power supply the door station supports is 12 VDC. Please make sure your power supply matches your door station. Complete wiring during installation. Refers to Terminal and Wiring Description for wiring details. Make sure all the related equipment is power-off during the installation. Installation Location: the lens of the device shall be 1.5 meters away from the ground. 3.3.1 Door Station with Fingerprint Module Installation Accessories 15 Face Recognition Door Station with 8-inch Screen User Manual Mounting Plate Figure 3-9 Mounting Plate Note The dimension of the mounting plate is 233 mm (W) 112.4 mm (H) 21 mm (D). 16 Face Recognition Door Station with 8-inch Screen User Manual Gang Box Figure 3-10 Gang Box Note mm (D). The dimension of the gang box is 312.9 mm (W) 128.4 mm (H) 40.8 The installation hole should be bigger than the actual size. The suggested dimension of the installation hole is 313.5 mm (W) 128.9 mm (H) 41.3 mm (D). 3.3.2 Surface Mounting 17 Face Recognition Door Station with 8-inch Screen User Manual Steps 1. Loosen splice set screws, and separate the host from the fingerprint module. Paste the mounting template on the wall according to the installation location requirements. Drill holes according to the location of the screw holes of the mounting template, and install the expansion bolts into the screw holes. 2. Fix the mounting plate to the wall with 4 supplied screws. 3. Fix the device to the mounting plate, and fix the device with the set screws. 4. Put the Silicone sealant sleeve at the USB part of the fingerprint module in place. Align the fingerprint module with the USB interface and install it into the device, and fix it with splice set screws. Note Do not touch the SD card slot and other devices during the process of plugging in and unplugging the power interface. Apply silicone sealant among the joints between the device and the wall
(except the lower side) to keep the raindrop from entering. Figure 3-11 Surface Mounting 3.3.3 Flush Mounting Steps 1. Cave an installation hole in the wall. The suggested dimension of the installation hole is 313.5 mm (W) 128.9 mm (H) 41.3 mm (D). Pull the cables out from 18 Face Recognition Door Station with 8-inch Screen User Manual the wall, insert the gang box into the installation hole, and mark the gang box screw holes position with a marker. 2. Take out the gang box. Drill 4 holes according to the marks on the wall, and insert the expansion sleeves into the screw holes. Fix the gang box with 4 expansion bolts. 3. Insert the door station into the gang box, and fix it with set screws. Note Do not touch the SD card slot and other devices during the process of plugging in and unplugging the power interface. Figure 3-12 Flush Mounting 3.4 Door Station with 4G Module Installation Accessories Note Gang box is required for the installation of door station. The power supply the door station supports is 12 VDC. Please make sure your power supply matches your door station. Complete wiring during installation. Refers to Terminal and Wiring Description for wiring details. 19 Face Recognition Door Station with 8-inch Screen User Manual Make sure all the related equipment is power-off during the installation. Installation Location: the lens of the device shall be 1.5 meters away from the ground. 3.4.1 Door Station with 4G Module Installation Accessories Mounting Plate Figure 3-13 Mounting Plate Note The dimension of the mounting plate is 233 mm (W) 112.4 mm (H) 21 mm (D). 20 Face Recognition Door Station with 8-inch Screen User Manual Gang Box Figure 3-14 Gang Box Note mm (D). The dimension of the gang box is 312.9 mm (W) 128.4 mm (H) 40.8 The installation hole should be bigger than the actual size. The suggested dimension of the installation hole is 313.5 mm (W) 128.9 mm (H) 41.3 mm (D). 3.4.2 Surface Mounting 21 Face Recognition Door Station with 8-inch Screen User Manual Steps 1. Loosen splice set screws, and separate the host from the 4G module. Paste the drill template on the wall according to the installation location requirements. Drill holes according to the location of the screw holes of the drill template, and install the expansion bolts into the screw holes. 2. Fix the mounting plate to the wall with 4 supplied screws. 3. Fix the device to the mounting plate, and fix the device with the set screws. 4. Put the Silicone sealant sleeve at the USB part of the 4G module in place. Align the 4G module with the USB interface and install it into the device, and fix it with splice set screws. Note Do not touch the SD card holder and other devices during the process of plugging in and unplugging the power interface. Apply Silicone sealant among the joints between the device and the wall
(except the lower side) to keep the raindrop from entering. Figure 3-15 Surface Mounting 3.4.3 Flush Mounting Steps 1. Cave an installation hole in the wall. The suggested dimension of the installation hole is 313.5 mm (W) 128.9 mm (H) 41.3 mm (D). Pull the cables out from 22 Face Recognition Door Station with 8-inch Screen User Manual the wall, insert the gang box into the installation hole, and mark the gang box screw holes position with a marker. 2. Take out the gang box. Drill 4 holes according to the marks on the wall, and insert the expansion sleeves into the screw holes. Fix the gang box with 4 expansion bolts. 3. Insert the door station into the gang box, and fix it with set screws. Note Do not touch the SD card holder and other devices during the process of plugging in and unplugging the power interface. Figure 3-16 Flush Mounting 23 Face Recognition Door Station with 8-inch Screen User Manual 4 Activation You can activate the device via Guarding Vision or Batch Configuration Tool. Default parameters of door station are as follows:
Default IP Address: 192.0.0.65. Default Port No.: 8000. Default User Name: admin. 4.1 Activate Device Locally You are required to activate the device first by settings a strong password for it before you can use the device. 1. Power on the device to enter the activation page automatically. 2. Create a password and confirm it. Tap Next to finish activation. 4.2 Activate Device via Web Steps Steps 1. The computer and the device should belong to the same subnet. 2. Enter the door station IP address into the address bar of the web browser to Note Default IP Address: 192.0.0.65. enter the activation page. Caution In order to improve the network security, the set password must be from 8 to 16 digits, and be a combination of at least two or more types of numbers, lowercase letters, uppercase letters, and special characters. 3. If there are multiple door stations in your network, please edit the IP address of the door station to prevent IP address conflicts from causing abnormal access to the door station. After logging in the door station, you can click Configuration 24 Face Recognition Door Station with 8-inch Screen User Manual Network TCP/IP to edit the door station IP address, subnet mask, gateway and other parameters. 4.3 Activate Device via Client Software Steps Steps 1. On the device management page, select Encoding Device/Door Station, and select the device to be activated in the online device area. 2. Click Activate to enter the activation page. 3. Create a password, and confirm the password. Click OK to activate the device. Note We highly recommend you to create a strong password of your own choosing
(using a password from 8 to 16 characters, including at least two kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. 4.4 Activate Device via Batch Configuration Tool 1. Run the batch configuration tool, select the online device that needs to be activated in the online device area, and click Activate. 2. Set the activation password in the Activate Device dialog box and click OK to complete the activation. In order to improve the network security, the set password must be from 8 to 16 digits, and be a combination of at least two or more types of numbers, lowercase letters, uppercase letters, and special characters. Caution Note If the device is in an inactive status, you cannot remotely configure the device. By holding Ctrl or Shift, select multiple inactive online devices and click Activate to activate the selected devices in batches. 25 Face Recognition Door Station with 8-inch Screen User Manual 5 Door Station Local Operation 5.1 Door Station Local Configuration Hold the menu page, enter the password and tap OK to enter the configuration page. 5.1.1 Edit Network Parameters After activating, you should edit the network parameters. Set the IP address of the door station and the IP address of the door station associated device, to realize the network communication between the devices. Steps page. 1. Long tap on the menu page, enter the password and tap OK to enter the settings 2. Tap Network Settings to enter the network parameter settings page. 3. Edit the relevant parameters according to the prompts: IP address, subnet mask and address gateway. 4. Exit the settings page. 5.1.2 Door Station Settings Edit the parameters of the door station (including but not limited to, phase No., building No., floor No.). Steps 1. Hold the menu page, enter the password and tap OK to enter the settings page. 2. Click Local Settings to enter the settings page. 3. Set the parameters of the door station (including but not limited to, phase No., building No., unit No., floor No., serial No. and community No.). 4. Enable Auto Screen Brightness, or set Screen Brightness manually. 5. Optional: Enable Channel Mode according to your needs. 26 Face Recognition Door Station with 8-inch Screen User Manual After the channel mode is enabled, the residents can directly pass through without verification. 6. After the door station settings are completed, exit the settings page to complete Note the configuration. Note Main Door Station: the serial No. is 0. Sub Door Station: the serial number is greater than 0 (Serial number of sub door station ranges from 1 to 8). One unit is equipped with at least one main door station. One main door station can be equipped with up to 8 sub door stations. 5.1.3 User Management Enter User Management Page Steps Add User Steps page. 1. Hold the menu page, enter the password and tap OK to enter the settings page. 2. Click User Management to enter the user management page. On the user management page, you can add new users, configure the user's room information, card information, face information, and fingerprint information. 1. Long tap on the menu page, enter the password and tap OK to enter the settings 2. Tap User Management to enter the user management page. 3. Tap + to enter the add user page. 4. Set Room No. 5. Add Card. 1) Select Card, and tap + to enter the add card page. 2) Enter the card No. manually or present the card in the card presenting area to obtain the card No. 27 Face Recognition Door Station with 8-inch Screen User Manual 3) Tap OK to enable the settings. 6. Add Face. 1) Select Face, and point the face at the camera. 2) Tap 3) Tap to add the face. to enable the settings. 7. Add Fingerprint. 1) Select Fingerprint, and tap +. 2) Put your finger on the fingerprint reader and add the fingerprint. 8. Set User Permission as User or Administrator. 9. Exit the settings page. You can view the device system version and QR Code of the device. 1. Hold the menu page, and enter the password (activation password) to enter the 5.1.4 Search Version Steps settings page. 2. Tap About. Result You can view QR Code of the device Cloud Intercom, System Model, System Version and open source notice. 5.2 Video Intercom Operation Door station supports calling users or management center. 5.2.1 Call Resident Call Resident from Main/Sub Door Station Tap any digit button on the main/sub door station page to enter the calling page. Enter the Room No., and tap to call residents. 28 Face Recognition Door Station with 8-inch Screen User Manual Note Both the main and sub door station support the elevator control function, that is, after calling the residents successfully, tap the unlock button on the indoor station, the elevator will automatically arrive at the floor where the door station is located, and the permission of the floor where the household is located will be opened (The elevator calling will take effect only after the elevator control is configured and the corresponding configuration of the door machine is completed). Door Station Elevator Control Settings: In batch configuration tool, tap Door Station Remote Configuration Video Intercom Access Control and Elevator Control , set Elevator No., Elevator Controller Type, The Number of Underground Floor, and set Interface Type as RS-485 or Network Interface. Enable elevator control. In batch configuration tool, tap Door Station Remote Configuration System RS-485 to enter RS-485 settings page and set elevator control type. Call Resident from Outer Door Station On the main page of the outer door station, tap Call to enter the calling page. Enter Phase No. + # + Building No. + # + Unit No. + # + Room No., and tap Call again to call residents. Enter Phase No. + # + Building No. + # + Unit No. + # + Room No., and tap Call again to call residents. Enter Phase No. + # + Building No. + # + Unit No. + # + Room No., and tap Call again to call residents. Enter Phase No. + # + Room No., and tap Call again to call residents. 5.2.2 Call Center Tap on the main/sub door station page to enter the calling page. to call management center administrator. Tap cancel button to cancel during Tap calling management center. 29 Face Recognition Door Station with 8-inch Screen User Manual You can unlock door station in following methods: Unlock by password, unlock by presenting card, unlock by face, and unlock by fingerprint. 5.3 Unlock Door 5.3.1 Unlock by Password Unlock by Password Unlock by Public Password Note On the menu page, Tap Enter # + Password + unlock buttonto unlock door. to enter the calling page. Make sure you have created the public password via iVMS-4200 Client Software remotely. On the menu page, tap Enter # + Password + #to unlock door. to enter the calling page. Make sure that you have added your face picture to the device. Refers to the User Management for details. 5.3.2 Unlock by Face Note Note Face forward at the camera to unlock. 5.3.3 Unlock by Presenting Card Make sure you have issued the card to the device. Refers to User Management for details. Present the card on the card reading area to unlock. 30 Face Recognition Door Station with 8-inch Screen User Manual 5.3.4 Unlock by QR Code Door station supports unlock by QR code. You can generate a QR code through the mobile phone client, and use the door station camera to scan the mobile phone QR code to open the door. Steps Note Make sure that the door station IP has been added to the indoor station, and the indoor station and the door station can communicate normally. Make sure that the door station is connected to the network. Make sure to issue the card first and link it to the door station. 1. Installing Mobile Client Software Here takes Android system as an example. 2. Register user accounts according to the prompts, and login to the client 3. Follow the prompts to add the indoor station by scanning the QR code/barcode or manually entering the serial number. 4. Enter unlock by QR code page and generate the QR code. 5. On the main page of door station, tap down button to enter the unlock by QR 6. Aim the QR code generated by the phone at the camera and scan the code to Note software. code page. open the door. Note It is recommended that when installing the door station, try to select a location that does not cause reflections, otherwise it may affect the QR code scanning. If it is acrylic door station, make sure that the membrane on the surface of the door machine has been torn off. It is recommended to align the mobile phone's QR code with the door station camera horizontally when scanning the QR code. QR code recognition is not supported at night. 31 Face Recognition Door Station with 8-inch Screen User Manual 6 Remote Configuration via Web 6.1 Live View In the browser address bar, enter the IP address of the device, and press the Enter key to enter the login page. Enter the user name and password, and click Login to enter the Live View page. You can start/stop live view, capture, record, audio on/off, two-way audio, etc. The stream type can be set as main stream or sub-stream. For IE (Internet Explorer) or Google users, the device supports two-way audio communication. Live View function may vary with different models. Please refer to the actual product. 6.2 Person Management You can add, delete or search the information of the user. Click User to enter the settings page. Click Add and enter the user name, floor No. and room No. to add user. Click Edit to modify the information of the user. Check the box of the user and click Delete to delete the selected user. Enter the keyword and click Search, and the information will be displayed in the list. Click View Face in the operation bar to view the face photos added by the user. 6.3 Number Settings Configure the corresponding SIP number for the device room number for communication. Click Number Settings to enter the settings page. Click +Add to enter room No. and the corresponding SIP number. Check the number information to be deleted, and click Delete to delete number information. 32 Face Recognition Door Station with 8-inch Screen User Manual 6.4 Device Management You can manage the linked device on the page. Add Linked Device Click Add to add the indoor station or sub door station. Enter the parameters and click OK to add the device. Click Import. Enter the information of the device in the template to import devices in batch. Caution When importing device information in batches, the original data will be cleared automatically. Export Device Information Click Export to export the information to the PC. Upgrade Linked Device Click Upload Upgrading Package, and click Browse to import the upgrading package. Click Timing Upgrade to pop-up the settings dialog. Slide Enable Upgrading Device Automatically, and set the start time and end time. The upgrading will start at the set time automatically. View Upgrading Version Put the mouse on the Upgrading Version to view the upgrading version and time. 6.5 Parameters Settings 33 Face Recognition Door Station with 8-inch Screen User Manual Internet Options Security to disable the Note Run the IE browser, and click Protected Mode. Click Settings to enter the settings page. 6.5.1 Local Settings Video Parameters:
Stream Type: Select the stream type toMain StreamorSub Stream. Play Performance: selectShortest Delay,BalanceorGood Fluencyaccording to your needs. Auto Preview: If you selectYes, when you enable preview, the page will automatically play the preview image; if you selectNo, when you enable the preview, you need to manually click the play button to preview image. Capture File Format: Set the save format of captured images. Video File Packaged Size of Video File: Select the packaged size of the video file according to your needs. Video File Saving Path: Video file is stored locally, you can selectBrowseto change the saving path. ClickOpen Folderto open the folder under the archive path. Capture and Clipping Preview Captures Saving Path: Capture file is stored locally, you can selectBrowseto change the saving path. ClickOpen Folderto open the folder under the archive path. Note Only IE and Google browsers support saving path settings. Other browsers default to the C drive download path. Please refer to the actual device page for more details. 34 Face Recognition Door Station with 8-inch Screen User Manual 6.5.2 System Configuration In system configuration, you can view device information, set system time, configure maintenance settings, and configure user information, etc. Click System to enter the settings page. Basic Information Click System Settings Basic Information to enter the settings page. Device system information includes device name, device No., device language, device system type, device model, serial No., version information, channel number, number of alarm input and output, etc. On the page, you can edit Device Name and Device No., and set Language and System Type according to your needs. Time Settings NTP Manual Time Sync Click System Settings Time Settings to enter the settings page. Select the Time Zone of your location from the drop-down list. Enable NTP, and set Server Address, NTP Port, and Interval. Enable Manual Time Sync., and set the time manually. Check Sync. with computer time. Click Save to enable the settings. Open Source Disclaimer Click System Settings About Device to enter the settings page. Click View Licenses to view the device license. System Maintenance Click System Maintenance to enter the settings page. 35 Face Recognition Door Station with 8-inch Screen User Manual Figure 6-2 System Maintenance RebootClick Reboot to reboot the device. Restore: Click Restore to restore parameters to default settings. Restore Default Reset all the parameters, except IP address, subnet mask and default gateway, to the default settings. Restore all parameters to default settings. Export Parameters: Export device parameter files, which can be used to configure the same parameters for another device. 1. Click Device Parameters to show the file encryption configuration. 2. Set and confirm the encryption password. 3. Click OK to export parameters. Import Parameters: Import device parameter files, which can be used to configure the same parameters for another device. 1. Click Browse, select the storage path of the device parameter file, and click Open. 2. Click Import. 3.Click OK and enter the encryption password to import. Upgrade: When the device program needs to be updated, you can upgrade the device. When the device needs to be upgraded, you can copy the upgrade program to the local computer, click Browse to select the saving path, and click Upgrade to start the upgrading. 36 Face Recognition Door Station with 8-inch Screen User Manual Do not power off during the upgrading. The device will reboot automatically after upgrading. Note Security Service SSH is generally used for remote debugging. For device security, it is recommended not to enable SSH when the service is not needed. Click Security Security Service to enter the settings page. Slide to enable Save to enable the settings. User Management Click User Management to enter the settings page. Administrator can click Edit to edit the permission for the users. Caution password can be edited. Admin is the default user. Admin name cannot be edited, and only its In order to ensure the security of account information, it is recommended to set a password with the length of 8 to 16 digits, and at least consist of a combination of two or more types of numbers, lowercase letters, uppercase letters and special characters (!"#$%&'()*
+,-./:;<=>?@[\]^_`{|}~Space). The password cannot contain the user name. The following types of passwords are risky passwords: the password length is less than 8 digits, the password contains only type 1 characters, and the password is the same as the user name, or the password is the reverse of the user name. In order to protect your privacy and improve product security, we recommend you change the risky password to a strong password. Password strength rules are as follows:
If the password contains three or more types (numbers, lowercase letters, uppercase letters, special characters), it is a strong password. If the password is a combination of numbers and special characters, lowercase letters and special characters, uppercase letters and special 37 Face Recognition Door Station with 8-inch Screen User Manual characters, lowercase letters and uppercase letters, it is a medium password. If the password is a combination of numbers and lowercase letters, or a combination of numbers and uppercase letters, it is a weak password. Online User Caution users. Click User Management Online Users to enter the settings page. The user can view all user information logged in to the device, including the No., logged-in user name, user type, IP address, and user operating time. Click Refresh to get the present information. If the IP address and user name are the same, only one user login information will be displayed. The online user interface can display the login information up to 30 Arming/Disarming Information Click User Management Arming/Disarming Information to enter the settings page. The user can view the arming information of the device, including the No., arming type and IP address. Click Refresh to refresh the current arming information. 6.5.3 Network Settings TCP/IP Settings Steps 1. Click Settings Network Basic Settings TCP/IP to enter the settings page. 38 Face Recognition Door Station with 8-inch Screen User Manual Figure 6-3 TCP/IP Settings 2. Configure the network parameters.
Set the IPv4 Address, IPv4 Subnet Mask, IPv4 Default Gateway, Preferred DNS Server and Alternate Server. Check DHCP, the device will get the parameters automatically. 3. Configure Alarm Center IP and Alarm Host Port. 4. Click Save to enable the settings. Port Settings Port setting parameters consist of HTTP Port, RTSP Port, HTTPS Port and Server Port. When accessing the device through the network, you can set the corresponding port according to your needs. 39 Face Recognition Door Station with 8-inch Screen User Manual Steps 1. Click Settings Network Basic Settings Port to enter the settings page. 2. The port No. needs to be changed when there are port conflicts. Figure 6-4 Port Configuration HTTP Port RTSP Port HTTPS Port Server Port Note When you log in with a browser, you need to add the modified port number after the address. For example, when the HTTP port number is changed to 81, you need to enter http://192.0.0.6581 when you log in with a browser. Real-time transmission protocol port, please make sure that your modified port is available. When you log in with a browser, you need to add the modified port number after the address. For example, when the HTTP port number is changed to 81, you need to enter http://192.0.0.6581 when you log in with a browser. When you login to the device via Client Software, you need to enter the port number in the login page to login to the device normally if you have changed the server port. Do not change the default port parameters randomly. 3. Click Save to enable the settings. SIP Settings SIP server enables communication between terminals in different network segments. If you do not register with the SIP server, you can only make calls between 40 Face Recognition Door Station with 8-inch Screen User Manual terminals on the same network segment. After successfully registering with the SIP server, the terminals can dial the SIP ID to complete the call. Steps 1. Click Network Basic Settings SIP to enter the settings page. Figure 6-5 SIP Settings 2. Check Enable VOIP Gateway. 3. Enter User Name and Password. 4. Set SIP Server Address and Server Port. 5. Enter dialing Number and Display the User Name. 6. Click Save to enable the settings. FTP Settings Steps page. You can upload the device capture file to the set FTP server by configuring FTP parameters. 1. Click Settings Network Advanced Settings FTP to enter the settings 41 Face Recognition Door Station with 8-inch Screen User Manual 2. Check Enable FTP, and select Server Type, enter Server IP Address, Port, User Figure 6-6 FTP Settings 3. Optional: Check Enable Anonymous, you do not need to configure the user Name and Password. name and password. 4. You can save the configuration file in Root Directory, Parent Directory or Child You can set device name, device IP, time, building No. and unit No. in parent directory. You can set building No., unit No. and door station number in parent directory. 5. You can set the name for FTP captures, set the delimiter, naming item, and naming element according to your needs. 6. Click Save to enable the settings. Directory. Note You can select IP address as the server address. 42 Face Recognition Door Station with 8-inch Screen User Manual Platform access provides you an option to manage the devices via platform. 1. Click Configuration Network Advanced Settings Platform Access to Platform Access Settings Steps enter the settings page. 2. Select platform access mode. and Verification Code. 4. Click Save to enable the settings. 3. Check Enable, configure the server IP address and set Access Server IP Address Note The verification code is used when adding devices to the mobile client. It can be modified. Please keep it properly. The verification code should contain 6 to 12 characters (it is recommended to be the combination of numeric and letter, and more than 8 characters). HTTP Listening Click Configuration Network Advanced HTTP Listening to enter the settings page. Enter the parameters according to the page and click Save to enable the function. 6.5.4 Video & Audio Settings Video Parameters Steps 1. Click Configuration Video/Audio Video to enter the settings page. 43 Face Recognition Door Station with 8-inch Screen User Manual 2. Configure the video parameters. Figure 6-7 Video Parameters Set the video parameters of main stream and sub-stream. Stream Type Video Type Resolution Image Quality Frame Rate Video Encoding Select the stream type as video stream, or video & audio composite stream. The video & audio composite stream includes audio signal and video signal. You can select the main stream resolution as 1280*720P or 1920*1080P, and select the sub-stream resolution as 640*480P or 1280*720P. You can select the corresponding resolution according to your actual needs. Bitrate Type & Max. Bitrate Select the bitrate type as constant or variable. Constant bitrate means to transmit at the set constant bitrate. Max. Bitrate ranges from 32 to 16384. You can set the quality level of the image. The frame rate is to describe the frequency at which the video stream is updated and it is measured by frames per second (fps). You can set it according to your actual needs. 44 Face Recognition Door Station with 8-inch Screen User Manual The device supports H.264. Please refer to the specific model for the video encoding type. I Frame Interval The number of frames between two key frames before and after. You can set I Frame Interval from 1 to 400. 3. Click Save to enable the settings. Audio Parameters Click Configuration Video/Audio Audio to enter the settings page. Figure 6-8 Audio Parameters You can set the stream type and audio encoding of the device audio. You can also set the device input volume, output volume and intercom volume. Drag the slider or enter the value in the input box to adjust. The adjustable range is from 1 to 100. Click Save to enable the settings. Select the stream type of the main stream or sub-stream. The device supports the audio encoding of G.711ulaw. Stream Type Audio Encoding 6.5.5 Image Settings The display setting parameters can be adjusted according to the actual installation environment of the device. Steps page. 1. Click Configuration Image Display Settings to enter the display settings 45 Face Recognition Door Station with 8-inch Screen User Manual Figure 6-9 Display Settings 2. Select the Format. 3. Optional: Enable WDR. 4. Set the display parameters. Adjust the brightness, contrast, saturation, and sharpness of the preview screen by dragging the progress bar. Adjust the screen by entering the corresponding value in the input box. If the current settings do not meet expectations, you can click Restore Defaults to restore the parameters to the initial status. The adjustable range of brightness, contrast, saturation and sharpness are all from 0 to 100. 5. Set the Day/Night Mode. 1) Set Day/Night Mode as Day or Night. 2) Set the Auto mode, and set the sensitivity. When the device perceives the low brightness of the environment, it will automatically turn on the night mode. 3) Set the Scheduled-Switch mode, and set the start time and end time. The daytime is from the beginning of the day to the end of the day, and the rest of the time is the night time by default.
Note Note 6. Configure the Supplement Light Parameters. 1) Set Supplement Light Type. 2) Set Supplement Light Mode. 46 Face Recognition Door Station with 8-inch Screen User Manual 3) Adjust Supplement Light Brightness by dragging the progress bar. 4) Set the Daytime Start Time and Daytime End Time. 7. Exit the settings page. 6.5.6 Event Settings When an event occurs, an alarm linkage will be triggered. Motion Detection Settings Motion detection detects the moving objects in the configured surveillance area, and a series of actions can be taken when the alarm is triggered. Steps 1. Click Event Motion to enter the settings page. Figure 6-10 Motion Detection 47 Face Recognition Door Station with 8-inch Screen User Manual 2. Slide Enable Motion Detection to enable the function. If the motion detection function is disabled, you cannot draw the detection area and adjust the sensitivity. 3. Click Draw Area. Click and drag the mouse on the window to draw a motion detection area. Click Stop Drawing to finish the drawing. Click Clear All to clear all of the areas. Move the slider to set the sensitivity of the detection. The higher the number, the higher the sensitivity. Note Clear Area Adjust Sensitivity Note When the sensitivity is 0, motion detection will not work. 4. Set the arming time. The device defaults to arming all day. Click the time period of arming, you can display and adjust the arming time of motion detection. If other time periods need to be set to the same arming time, click the green copy button on the right side of the timeline. You can configure the start time and end time of 8 time periods in detail in one day. 5. Set linkage method as Notify Surveillance Center, and motion detection can link 6. Click Save to enable the settings. When an event occurs, you can specify the event linkage. 1. Click Settings Event Basic Event Event Linkage to enter the settings Note the alarm. Event Linkage Steps page. 48 Face Recognition Door Station with 8-inch Screen User Manual Figure 6-11 Event Linkage 2. Configure the major types of events, the major types of access control events are divided into Device Event and Door Event. 3. Configure minor types of events.
- When the major type of access control event is selected as Device Event, the
- When the major type of access control event is selected as Door Event, the minor type is Host Tamper Alarm. minor type is Door Open Timeout. 4. Linkage Mode Settings: events can trigger alarm linkage, and linkage modes consist of Normal Linkage and Upload Center. Normal Linkage Set alarm notifications. Upload Center When an alarm occurs, the alarm information will be uploaded to the surveillance center. 5. Click Save to enable the settings. 49 Face Recognition Door Station with 8-inch Screen User Manual 6.5.7 Two-way Audio Configuration Device No. Settings Steps Identify the organization the device belongs to and the device No. 1. Click Settings Intercom Device No. to enter the settings page. 2. Select Device Type as door station or outer door station. Figure 6-12 Device No. Settings 3. Set Phase No., Building No., Unit No., Floor No., No. and Community No. of the device. 4. Click Save to enable the settings. Session Settings Steps Enable the communication between door station, main station, and video intercom server. 1. Click Settings Intercom Session Settings to enter the settings page. 50 Face Recognition Door Station with 8-inch Screen User Manual Figure 6-13 Session Settings 2. Set activation password, main station IP, intercom serve and enable 1.0 protocol. Register Number Register Number of the device, created by default. Registration Password Activation password of the main station. Main Station IP IP address of the main station. Video Intercom Server IP Server IP of the video intercom server. Enable Protocol 1.0 After enabling, door station will register to the main station via previous protocol. After enabling, door station will register to the main station via new protocol. 3. Click Save. Time Parameters Click Configuration Intercom Time Parameter to enter the settings page. 51 Face Recognition Door Station with 8-inch Screen User Manual Figure 6-14 Time Parameter You can drag the slider to configure Max. Call Duration and Max. Message Duration, and click Save to enable the settings. Note The Max. call duration ranges from 90 s to 120 s. The Max. message duration ranges from 30 s to 60 s. 6.5.8 Access Control Settings Permission Password In order to improve password security, it is recommended to modify the permission password regularly. Steps settings page. 1. Click Configuration Access Control Permission Password to enter the Figure 6-15 Permission Password 2. Select Password Type. 3. Edit the password. 52 Face Recognition Door Station with 8-inch Screen User Manual Caution In order to prevent security risks, you must modify the initial password in time after the initial login to prevent others from logging in to your device without authorization or causing other undesirable consequences. 1. ClickSettings Access Control Door Parametersto enter the settings page. 4. Click Save to enable the settings. Set Door Parameters Steps 2. Select theDoor, and edit theDoor Name. 3. SetRelay ReverseandOpen Duration. 4. ClickSaveto enable the settings. Card Security Settings You can encrypt the card to ensure its security. Steps 1. SlideThe Card Encryption Parameterto encrypt the card. 2. Configure encrypted sectors. 3. ClickSave. Elevator Control Steps 1. Click Settings Access Control Elevator Control to enter the settings page. 53 Face Recognition Door Station with 8-inch Screen User Manual Figure 6-16 Elevator Control 2. Check Enable Elevator Control. 3. Select an Elevator No., Elevator Controller Type and Interface Type. Note Only main door station supports elevator control. If you select Network Interface, enter the elevator controller's IP address, port No., user name, and password. You can connect the door station to the elevator controller with RS-485 wire. Opening Time: Ranges from 1 second to 255 seconds. 4. Click Save to enable the settings. RS-485 Settings Steps Set the working mode of an external ladder controller or card reader. 1. Click Settings Access Control RS-485 to enter the settings page. Figure 6-17 RS-485 Settings 2. Select the No. 3. Select the working mode. 54 Face Recognition Door Station with 8-inch Screen User Manual Note No. 1 can be set to work mode as ladder control, card reader or disabled. 4. Click Save to enable the settings. 6.5.9 Smart Settings Biometrics Settings Steps 1. Click Configuration Smart Biometrics Settings to enter the settings page. Figure 6-18 Biometrics Settings 2. Slide to enable Face Anti-spoofing, and set Live Face Detection Security Level. 3. Select Application Mode as Indoor or Other. 4. Set Continuous Face Recognition Interval and 1:N Matching Threshold. 5. Optional: Slide to enable Night Mode. 6. Click Save to enable the settings. Area Configuration Steps Draw the location, and adjust the size of the face recognition area. 1. Click Configuration Smart Settings Area Configuration . 55 Face Recognition Door Station with 8-inch Screen User Manual 2. Drag the frame to adjust the size of the recognition area. Figure 6-19 Area Configuration 3. Click Save. 4. Optional: Click or in Live View to record or capture. 6.5.10 Theme Settings Set the advertisement on the main page of the device. Steps 1. Click Configuration Theme to enter the settings page. 56 Face Recognition Door Station with 8-inch Screen User Manual Figure 6-20 Theme Settings 2) Create a theme name, and select the advertisement body as picture or 2. Set the advertisement theme. 1) Click + Add Theme. Video. 3) Click Save. and click upload. 4. Set the play schedule. 3. Click + to select a picture from the local as the material to be played in standby, 1) Select a theme and drag the time interval to be played on the timeline. 2) Optional: Click the drawn area to edit the time manually. 3) Click Delete to delete the selected area. Click Delete All to delete all selected 5. Drag the slider or enter the value directly to configure the picture switching areas. time. 6. Click Save. 57 Face Recognition Door Station with 8-inch Screen User Manual 7 Remote Configuration via Client Software You can set Video Intercom system and manage video intercom products including indoor station, door station and main station via Guarding Vision client software. 7.1 Edit Device Network Parameters Before You Start Before configuring the device remotely, make sure that the device is activated. Steps 1. On the person management page, click Online Device. 2. Click to pop up the network parameter settings page. 3. Edit the device IP address, subnet mask, default gateway, etc. 4. Enter the device activation password. 5. Click Save to enable the settings. Note Please keep the device IP address and the local computer IP address in the same network segment. You can add devices via the following methods: add device online, add device via IP address, add device via IP segment, add device in batch, and add device via EHome. 7.2 Add Device 7.2.1 Add Online Device Steps 1. Click Online Device. 3. Click Add. 58 2. In the online device area, select an activated online device, or press the Shift or Ctrl to select multiple activated online devices. Face Recognition Door Station with 8-inch Screen User Manual 4. Enter the device Name, User Name, Password, and click Add. Note configure the indoor station. support batch activation. Only when the doorphone is added to the client software, you can remotely Only online devices with the same user name and activation password can After the device is added, the device information will be listed in the device list area. 1. In the device list area, click Add to pop up the device adding dialog box. 2. Select the adding mode as IP/Domain Name. 3. Enter the corresponding information of the device: Name, Address, User Name, 7.2.2 Add Device via IP Address Steps Steps and Password. 4. Click Add. 7.2.3 Add Device via IP segment 1. In the device list area, click Add to pop up the device adding dialog box. 2. Select adding method as IP segment, and enter the corresponding information:
Starting IP Address. Ending IP Address, Port No., User Name, and Password. 3. Click Add. After adding, the device information will be displayed in the device list area. 7.2.4 Add Devices in Batch Steps 1. In the device list area, click Add to pop up the device adding dialog box. 2. Select the adding mode as Import in Batch. 3. Click Export Template, and enter the device parameters to be imported according to the template. 59 Face Recognition Door Station with 8-inch Screen User Manual 4. Select the file and click Add to import. Note The file format for batch import is .csv format. 7.2.5 Add Device Via EHome Steps 1. In the device list area, click Add to pop up the device adding dialog box. 2. Select the adding mode as EHome. 3. Enter the corresponding information of the device: Name, Device Account , and ISUP login key. 4. Click Add. 7.3 Local Configuration via Client Software Click Maintenance and Management System Settings Access Control and Video Intercom , and you can set the incoming ringtone, ring timeout time, the maximum speaking duration with the indoor station, and the maximum speaking duration with the access control device. Note Click the speaker icon to hear the test ringtone. The imported ringtone must be in wav format. Ringing Timeout Time: The maximum time that the client software can ring the bell when no one answers the call from the the door station or indoor station. Ringing timeout time ranges from 15 s to 60 s. The maximum speaking duration with indoor station ranges from 120 s to 600 s. After the speaking duration exceeds the maximum speaking duration, the call will end automatically. The maximum speaking duration with door station ranges from 90 s to 120 s. After the speaking duration exceeds the maximum speaking duration, the call will end automatically. 7.4 Device Management 60 Face Recognition Door Station with 8-inch Screen User Manual You can add device, modify device, delete device, perform remote configuration, etc. in device management page. The specific method is similar to web configuration . For details, please refer to the Guarding Vision client user manual. Note When adding a third-party door station encoding device, the client only supports the management of device information, and does not support direct preview. Third-party encoding device must be used in conjunction with the TV wall. The client can add up to 256 door stations (including unit door station and doorphone). 7.5 Live View 7.6 Intercom Organization Structure Configuration 7.6.1 Add Organization Steps page. 1. On the main page of the client, click User Management to enter the settings 2. Click Add, enter the organization name to add the organization. 7.6.2 Modify and Delete Organization You can select the added organization and click to modify its name. You can select an organization, and click X to delete it. Note cannot be deleted. Make sure there is no person added under the organization, or the organization The lower-level organizations will be deleted as well if you delete an organization. 7.7 Person Management 61 Note address. Note Note Upload Take Photo Face Recognition Door Station with 8-inch Screen User Manual You can add, edit, import, and export person information. 7.7.1 Add Person Steps 1. On the main page of the client, click Person Management to enter the person information configuration page. 2. Select an organization in the organization list and click Add on the person panel to pop up the adding person dialog. The Person No. will be generated automatically, and it is editable. 3. Set the person basic information. 1) Enter basic information: name, gender, tel, effective period and E-mail Up to 15 characters are allowed for person name. 2) Click Add face to upload the photo. The picture should be in *.jpg format. Click Upload, select the person picture from the local PC to upload it to the client. Click Take Photo, and slide to enable device verification. After the face collector is initialized successfully, you can take a photo to obtain a face picture. Remote Collection Click Remote Collection, select the collection device, click the photo to get the photo, and click OK to complete the collection. 4. Issue the card for the person. 1) Click Credential Card. enter the Card No. 2) Click + to pop up the Add Card dialog, select Normal Card as Card Type, and 3) Click Read and the card(s) will be issued to the person. 5. Add fingerprint permissions for the person. 62 Face Recognition Door Station with 8-inch Screen User Manual 1) Click Credential Fingerprint. 2) Select Collection Mode and Collection Recorder. 3) Click Start to Scan to add the fingerprint. 4) Click Add to save the fingerprint. Only some models of the devices support fingerprint function, please refer to the specific product. 6. Click Access Control and check the access control permissions that need to be Note configured. 7. Linked Device 1) Click Resident Information, and select the device to be bound. 2) Set the floor No. and room No. 8. Click Save to enable the settings. 7.7.2 Modify and Delete Person Steps settings. 1. Select the person and click Edit to open the editing person dialog. 2. Modify the person information in the pop-up window and click OK to save the 3. Select the person in the organization, and click Delete to delete the person. 4. Select the person in the organization, click Change Organization, search or select the organization to be moved to, and click OK to complete the organization change. 7.7.3 Import and Export Person Information Import Person Information Steps 1. On the person management page, click Import. 2. In the pop-up dialog box, click ..., and select the CVS file to import. 3. Click OK, and the system will display the imported results. 63 Face Recognition Door Station with 8-inch Screen User Manual 4. Click Close to complete the import. Note Click Download Template for Importing Person to download the template. The import template contains the following information: person name, gender, department code, certificate type, certificate number, phone number and address. The number of persons can not exceed 5000 in a single import. If the imported person No. already exists in the client database, the system will automatically replace the original person information. Export Person Information Steps 1. On the person management page, click Export. 2. Select Person Information or Face Picture. Check the checkboxes to select the person information to export. 3. Click Export, select the saving path of the exported file and click Save. All person information will be exported to specified location. 7.7.4 Get Person Information Steps 1. In the person management page, click Get Person Information. 2. Select device(s) to get person information. 3. Click Get, the person information will be imported to the client software. Note Note The device added using COM or ISUP connection mode does not support get person information function. 7.7.5 Issue Card in Batch 64 Face Recognition Door Station with 8-inch Screen User Manual Steps 1. On the person management page, click Batch Issue Cards. 2. Click Settings to set issue card paramrters.
If you set issue card Mode as Local, you need to set Card Issuer, Card Type and Card No., and enable Buzzer and M1 Card Encryption and click OK to issue card. If you set Issue Card Mode as Remote, select card issuing device, and click OK to issue card. 1. On the main page of the client, click Access Control Access Group to enter the 7.7.6 Permission Settings Add Permissions Steps settings page. 2. Click Add to pop up the adding dialog box. 3. Configure the parameters. 1) Enter Name of the permission. 2) Select the Schedule Template. 3) Check the person to Selected according to your needs. 4) Check the device to Selected according to your needs. 4. Click Save. 5. Check the permission and click Apply All to Device. The status of the permission displays as Applied. 6. Optional: Click Applying Status to check the details. Modify/Delete Permissions On the page of the permission settings, click permission. to edit the parameters of the Select one or more permissions, click Delete to remove the permissions. 7.8 Video Intercom Settings 65 Face Recognition Door Station with 8-inch Screen User Manual 7.8.1 Video Intercom You can call residents on the video intercom page, and the residents can also call the client software through the indoor station. The door station can also call the client software. Steps 1. On the main page, click Access Control Video Intercom Video Intercom to enter the video intercom page. 2. Select an organization from the list, and the residents list on the right displays the residents information under the organization. 3. Select a resident from the list, and click to call the corresponding resident. 4. If the indoor station calls the client software, you can click Answer or Hang Up. 5. After the call is connected, the device will enter the dialog page. Figure 7-1 Answer the Call Adjust the Volume Hang up the Dialog Unlock Remotely Click to adjust the volume of the microphone. Click to adjust the volume of the microphone. Click Hang Up to hang up the dialog. If the indoor station is connected to the door station, click station. to open the door associated with the door 66 Face Recognition Door Station with 8-inch Screen User Manual Note One video intercom device can only connect with one client software. The maximum ring duration can be set from 15 s to 60 s. The maximum speaking duration between the client software and indoor station can be set from 120 s to 600 s. 7.8.2 Search Video Intercom Information Search Call Logs Steps to enter the page. 2. Set the search conditions. Call Status 1. On the Video Intercom page, click Access Control Video Intercom Call Log You can select the call status as dialed, received or missed. Select the device type as indoor station, door station, outer door station or analog indoor station. Set the start time and end time of a time period to search the logs. Device Type Time 3. Click Search. 4. Optional: You can reset the settings or export the notice after the search. Reset the Settings Click Reset to reset search conditions. Click Export to export the search results to your PC. Export Search Results Search Notice Steps enter the page. 2. Set the search conditions. 67 1. On the Video Intercom page, click Access Control Video Intercom Notice to Face Recognition Door Station with 8-inch Screen User Manual Information Type You can set the information type as all, advertising Information, property information, alarm information or notice information according to your needs. Set the start time and end time of a time period to search the logs. Time 3. Click Save. 4. Optional: You can reset the settings or export the notice after the search. Reset the Settings Click Reset to reset all the configured search conditions. Export Search Results Click Export to export the notices to your PC. 7.8.3 Upload Arming Information Steps 1. On the upper-right corner of menu page of the client software, click Tool Device Arming Control to enter the settings page. 2. Slide the slider to set the arming state of the device. Caution Note page. When the device is added to the client software, the client software will automatically establish an arming connection, and the device is automatically in the arming state. Only support 1-channel arming connection. If the device is added to client software A and the automatic arming is successful, the arming connection cannot be established if you add device to client software B at this time. The alarm information will only be uploaded to client software A. After the arming setting, when an alarm occurs, the alarm information can be automatically uploaded to the client software. After the arming setting, you can view alarm records in the alarm events When adding device to the client software, the device will automatically enter arming state by default. 68 Face Recognition Door Station with 8-inch Screen User Manual 3. Optional: Click Arm All or Disarm All to arm or disarm devices. 69 Face Recognition Door Station with 8-inch Screen User Manual 8 Batch Configuration Tool You can only configure and operate the door station after creating a password for the device activation. Default parameters of door station are as follows:
Default IP Address: 192.0.0.65. Default Port No.: 8000. Default User Name: admin. 8.1 Create the Organization Structure In the batch configuration tool settings page, click Flash Rom to enter the settings page. Through the rebooting tool, you can complete the network configuration, associated network configuration and room No. configuration of all indoor stations in a community in batches, and quickly realize the communication between the indoor stations in the community and the door station, main station, and central platform. 8.1.1 Create Community Structure Steps 1. Click Flash Tool to enter the page. 2. On the flashing tool page, according to the actual situation of the community, edit/display area in the community structure, and create the community structure (including district, building, unit, building, floor and room). Note Click Delete to delete all community structure. Click or - to expand or collapse the community structure list. You can also select a structure and click Expand All or Collapse All to expand or collapse community structure list. 8.1.2 Door Station Flash 70 Face Recognition Door Station with 8-inch Screen User Manual Link Main Door Station Steps rooms) as an example. 1. Select the community structure. Here takes building 1 (with 1 unit, 1 floor, 2 Figure 8-1 Link Main Door Station 2. Set the starting IP address of main door station (The default starting IP is paired with the unit 1 sub door station). 3. Click Calculate to get the end IP address of door station and main door station No.(such as 1-1-1-1). The ending IP address depends on the number of units in selected structure. 4. Set the corresponding network information. Set the SIP server IP address, main station IP address, central platform IP address and port No. Set the subnet mask and gateway address. 5. In the online device area, select a door station, enter the login password, and click Root. 71 Face Recognition Door Station with 8-inch Screen User Manual Caution During the rooting process, if the door station has been activated locally on the device or the configuration tool, the login password entered here is the activation password. During the rooting process, if the door station is not activated, then entering the login password here is to set a password by yourself. At the same time as the rooting, the door station will be activated. Link Sub Door Station Steps rooms) as an example. 1. Select the community structure. Here takes building 1 (with 1 unit, 1 floor, 2 Figure 8-2 Link Sub Door Station 2. Set the starting floor, starting IP address and the number of sub door station. 3. Click Calculate to get the end IP address of sub door station and sub door station No.(such as 1-1-1-1). The ending IP address depends on the number of sub door station. 72 Face Recognition Door Station with 8-inch Screen User Manual 4. Set the corresponding network information. Set the main door station IP address, SIP server IP address, main station IP address, central platform IP address and port No. Set the subnet mask and gateway address. 5. In the online device area, select a door station, enter the login password, and click Root. At this time, the corresponding No. (such as 1-1-1-1) and IP address of the sub door station are generated. Caution During the rooting process, if the sub door station has been activated locally on the device or the configuration tool, the login password entered here is the activation password. During the rooting process, if the sub door station is not activated, then entering the login password here is to set a password by yourself. At the same time as the rooting, the sub door station will be activated. 8.2 Upgrade in Batch In the batch tool settings page, clickUpgrade in Batchto enter the page. Through upgrading in batch, you can upgrade multiple intercom devices in batch. Figure 8-3 Batch Upgrading 8.2.1 Add Devices to be Upgraded 73 Face Recognition Door Station with 8-inch Screen User Manual You can add online devices to be upgraded in the same network segment, or add devices to be upgraded by IP address or IP segment. Add Online Device for Upgrading Steps window. OK. 1. On the batch upgrade page, click Online Devices to open the online device 2. Select a device, click Login Device, enter the user name and password, and click Figure 8-4 Add Online Device 3. After the device is logged in, the status column will be marked as logged in. Select one or more logged-in devices and click Add Devices to the List . After adding, the status column will indicate that the device has been added. Add via IP or IP Segment Steps window. 1. On the batch upgrade page, click Add via IP to open the IP/IP segment search 74 Face Recognition Door Station with 8-inch Screen User Manual Enter the device IP address and search for the device to be added. Enter the device IP segment and search for the device to be added. 2. Search and add devices. Search via IP Search via IP Segment 3. Click Add Device. 8.2.2 Upgrade Device Online Upgrade You can upgrade the device via the file, or upgrade the device online. The client can search for the new upgrade file information of the device automatically on the server. When a new upgrade file is found, the online upgrade column will display "Required", otherwise it will display "Not required". 1. Select the device to be upgraded, select the upgrade method as online upgrade, and click Download Upgrade File. The client will automatically download the latest upgrade file. 2. When the download status shows 100%, the download of the upgrade file is completed, click Start Upgrade, and the device starts to upgrade. Upgrade Device by File The device can be upgraded via the local upgrade file. 1. Select the device that needs to be upgraded, select the upgrade mode as file upgrade, and click ... to enter the settings page. Steps Steps 75 Face Recognition Door Station with 8-inch Screen User Manual 2. Select the upgrade file, click Open and Start to Upgrade, and the device starts to Figure 8-5 Upgrade by File upgrade. Note Device will reboot automatically after upgrading. 76 UD23399N
1 | Applicant Declaration Letter | Cover Letter(s) | 130.02 KiB | June 15 2021 |
a) b) c) d) e) f) g) SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name Hangzhou Hikvision Digital Technology Co., Ltd. No. 555 Qianmo Road, Binjiang District Hangzhou 310052, China Address Grantee Code FCC ID Contact Email Contact Phone Authorized Contact Name 2ADTD 2ADTD-KD94X3 Xiuying Zhang zhangxiuying@hikvision.com
+86-571-88075998 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;
in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:
labeling the equipment with the exact FCC ID as specified in this application,
(1)
(2) compliance statement labeling pursuant to the applicable rules,
(3) compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.
(1)
(2)
(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Date:2021/06/10 Applicant Signature:
Print Name:
Title:
Xiuying Zhang Senior Certification engineer
*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Applicant Declaration Rev:0.0
1 | Auth letter | Cover Letter(s) | 39.56 KiB | June 15 2021 |
Hangzhou Hikvision Digital Technology Co., Ltd. TO:
Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Date: 2021-06-10 Regarding: FCC ID: 2ADTD-KD94X3 To whom it may concern:
We, the undersigned, hereby authorize Ellien Zhou to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Hangzhou Hikvision Digital Technology Co., Ltd. This authorization is valid until further written notice from the applicant. Name (Printed): Xiuying Zhang Title: Senior Certification engineer Signature:
On behalf of Company: Hangzhou Hikvision Digital Technology Co., Ltd. Telephone: +86-0571-88075998-62460
1 | Confidentiality FCC | Cover Letter(s) | 87.61 KiB | June 15 2021 |
Confidentiality Request regarding application for FCC ID: 2ADTD-KD94X3 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States Hangzhou Hikvision Digital Technology Co., Ltd. To:
From: Hangzhou Hikvision Digital Technology Co., Ltd. No. 555 Qianmo Road, Binjiang District, angzhou 310052, China Regarding:
LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature:
Printed Name (on file with the FCC associated with the Grantee Code): Xiuying Zhang Title: Senior Certification engineer Company Name: Hangzhou Hikvision Digital Technology Co., Ltd.
1 | MCL | Cover Letter(s) | 120.46 KiB | June 15 2021 |
Hangzhou Hikvision Digital Technology Co., Ltd. Current Date : 2021-06-14 To:
SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. No. 588 West Jindu Road, Songjiang District, Shanghai, China. 201612 Dear Sir/Madam, Subject: Declaration Letter about Identity of Products
*WE (Hangzhou Hikvision Digital Technology Co., Ltd.) HEREBY DECLARED THAT follows:
Product Description Door Station Model No. DS-KD9413-E6UHK,DS-KD9413-E6CKV,DS-KD9413-E6UVS,DS-KD9413-
E6KVO,DS-KD9413-E6HUN,DS-KD9403-E6,DS-KD9403-E6UHK,DS-KD94 03-E6CKV,DS-KD9403-E6UVS,DS-KD9403-E6KVO,DS-KD9403-E6HUN Manufacturers Name Hangzhou Hikvision Digital Technology Co., Ltd. Manufacturers Address No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
*Except that the model number, and appearance deviation, are identical with the original product as Note: The definition of identical should be electrically identical. A device will be considered to be electrically identical if no changes are made to the devices schematics, board layouts, component layouts, chip sets, resistors and all other electrical aspects of the device are identical. Model No. ():
DS-KD9413-E6 Manufacturers Name ():
Hangzhou Hikvision Digital Technology Co., Ltd. Manufacturers Address):
No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Sincerely, Signature ():
Printed Name ():
Xiuying Zhang Position/Title ():
Senior Certification engineer Contact Number ():
+86-571-88075998
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2021-06-15 | 13.56 ~ 13.56 | DXX - Part 15 Low Power Communication Device Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2021-06-15
|
||||
1 | Applicant's complete, legal business name |
Hangzhou Hikvision Digital Technology Co., Ltd.
|
||||
1 | FCC Registration Number (FRN) |
0024149825
|
||||
1 | Physical Address |
No. 555 Qianmo Road, Binjiang District
|
||||
1 |
Hangzhou, N/A
|
|||||
1 |
China
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
U******@SGS.COM
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
2ADTD
|
||||
1 | Equipment Product Code |
KD94X3
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
X****** Z****
|
||||
1 | Telephone Number |
+86-5********
|
||||
1 | Fax Number |
+86-5********
|
||||
1 |
z******@hikvision.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
SGS-CSTC Standards Technical Services Co., Ltd.
|
||||
1 | Name |
P****** Z****
|
||||
1 | Physical Address |
588 West Jindu Road, Xinqiao, Songjiang
|
||||
1 |
ShangHai, 201612
|
|||||
1 |
China
|
|||||
1 | Telephone Number |
+8621********
|
||||
1 | Fax Number |
02161********
|
||||
1 |
P******@sgs.com
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
SGS-CSTC Standards Technical Services Co., Ltd.
|
||||
1 | Name |
P******** Z****
|
||||
1 | Physical Address |
588 West Jindu Road, Xinqiao, Songjiang
|
||||
1 |
ShangHai, 201612
|
|||||
1 |
China
|
|||||
1 | Telephone Number |
+8621********
|
||||
1 | Fax Number |
02161********
|
||||
1 |
P******@sgs.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DXX - Part 15 Low Power Communication Device Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Door Station | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Compliance Certification Services (Kunshan) Inc.
|
||||
1 | Name |
J****** C******
|
||||
1 | Telephone Number |
+ 86-******** Extension:
|
||||
1 |
J******@sgs.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 13.56000000 | 13.56000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC