FCC ID: 2ADTD-K1T320EFWX Face Recognition Terminal

DS-K1T320 Series Face Recogintion Terminal User Manual DS-K1T320 Series Face Recogintion Terminal User Manual Legal Information 2021 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website ( https://

www.hikvision.com/ ). Please use this Manual with the guidance and assistance of professionals trained in supporting the Product. Trademarks Hikvision in various jurisdictions. Other trademarks and logos mentioned are the properties of their respective owners. and other Hikvision's trademarks and logos are the properties of Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED "AS IS" AND "WITH ALL FAULTS AND ERRORS". HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE i DS-K1T320 Series Face Recogintion Terminal User Manual DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATTER PREVAILS. Data Protection During the use of device, personal data will be collected, stored and processed. To protect data, the development of Hikvision devices incorporates privacy by design principles. For example, for device with facial recognition features, biometrics data is stored in your device with encryption method; for fingerprint device, only fingerprint template will be saved, which is impossible to reconstruct a fingerprint image. As data controller, you are advised to collect, store, process and transfer data in accordance with the applicable data protection laws and regulations, including without limitation, conducting security controls to safeguard personal data, such as, implementing reasonable administrative and physical security controls, conduct periodic reviews and assessments of the effectiveness of your security controls. ii DS-K1T320 Series Face Recogintion Terminal User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Danger Caution Note Indicates a hazardous situation which, if not avoided, will or could result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results. Provides additional information to emphasize or supplement important points of the main text. iii DS-K1T320 Series Face Recogintion Terminal User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body. FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE"

and comply therefore with the applicable harmonized European standards listed iv DS-K1T320 Series Face Recogintion Terminal User Manual under the EMC Directive 2014/30/EU, RE Directive 2014/53/EU,the RoHS Directive 2011/65/EU 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see:

www.recyclethis.info 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury

(Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see:www.recyclethis.info This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorise aux deux conditions suivantes :

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. v DS-K1T320 Series Face Recogintion Terminal User Manual Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into Dangers and Cautions:

Dangers: Neglecting any of the warnings may cause serious injury or death. Cautions: Neglecting any of the cautions may cause injury or equipment damage. Dangers: Follow these safeguards to prevent serious injury or death. Cautions: Follow these precautions to prevent potential injury or material damage. Danger:

In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region. Do not connect several devices to one power adapter as adapter overload may cause over-heat or fire hazard. If smoke, odors or noise rise from the device, turn off the power at once and unplug the power cable, and then please contact the service center. The socket-outlet shall be installed near the equipment and shall be easily accessible. 1. Do not ingest battery. Chemical burn hazard!

2. This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. 3. Keep new and used batteries away from children. 4. If the battery compartment does not close securely, stop using the product and keep it away 5. If you think batteries might have been swallowed or placed inside any part of the body, seek from children. immediate medical attention. 6. CAUTION: Risk of explosion if the battery is replaced by an incorrect type. 7. Improper replacement of the battery with an incorrect type may defeat a safeguard (for example, in the case of some lithium battery types). 8. Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery, which may result in an explosion. 9. Do not leave the battery in an extremely high temperature surrounding environment, which may result in an explosion or the leakage of flammable liquid or gas. 10. Do not subject the battery to extremely low air pressure, which may result in an explosion or the leakage of flammable liquid or gas. 11. Dispose of used batteries according to the instructions. vi DS-K1T320 Series Face Recogintion Terminal User Manual Cautions:

Do not drop the device or subject it to physical shock, and do not expose it to high electromagnetism radiation. Avoid the equipment installation on vibrations surface or places subject to shock (ignorance can cause equipment damage). Do not place the device in extremely hot (refer to the specification of the device for the detailed operating temperature), cold, dusty or damp locations, and do not expose it to high electromagnetic radiation. Exposing the equipment to direct sun light, low ventilation or heat source such as heater or radiator is forbidden (ignorance can cause fire danger). The device cover for indoor use shall be kept from rain and moisture. Exposing the equipment to direct sun light, low ventilation or heat source such as heater or radiator is forbidden (ignorance can cause fire danger). Please use a soft and dry cloth when clean inside and outside surfaces of the device cover, do not use alkaline detergents. Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher security level, use multiple authentication modes. The serial port of the equipment is used for debugging only. Install the equipment according to the instructions in this manual. To prevent injury, this equipment must be securely attached to the floor/wall in accordance with the installation instructions. Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or equivalent type only. Dispose of used batteries according to the instructions provided by the battery manufacturer. This bracket is intended for use only with equipped devices. Use with other equipment may This equipment is for use only with equipped bracket. Use with other (carts, stands, or carriers) result in instability causing injury. may result in instability causing injury. vii DS-K1T320 Series Face Recogintion Terminal User Manual Available Models Product Name Model Wireless Face Recognition Terminal DS-K1T320MFWX DS-K1T320MFX DS-K1T320MWX DS-K1T320MX DS-K1T320EFWX DS-K1T320EFX DS-K1T320EWX DS-K1T320EX 13.56 MHz Card Presenting Frequency, Wi-Fi 2.4G 13.56 MHz Card Presenting Frequency 13.56 MHz Card Presenting Frequency, Wi-Fi 2.4G 13.56 MHz Card Presenting Frequency 125 KHz Card Presenting Frequency, Wi-Fi 2.4G 125 KHz Card Presenting Frequency 125 KHz Card Presenting Frequency, Wi-Fi 2.4G 125 KHz Card Presenting Frequency Use only power supplies listed in the user instructions:

Model Manufacturer Standard TS-A012-120100E2 05K000C00 Shenzhen Transin Technologies CEE Co., Ltd viii DS-K1T320 Series Face Recogintion Terminal User Manual Contents Chapter 1 Overview .................................................................................................................... 1 1.1 Overview ................................................................................................................................ 1 1.2 Features ................................................................................................................................. 1 Chapter 2 Appearance ................................................................................................................ 2 Chapter 3 Installation ................................................................................................................. 4 3.1 Installation Environment ........................................................................................................ 4 3.2 Install with Gang Box ............................................................................................................. 4 3.3 Surface Mounting .................................................................................................................. 5 3.4 Base Mounting ....................................................................................................................... 7 Chapter 4 Wiring ........................................................................................................................ 9 4.1 Terminal Description .............................................................................................................. 9 4.2 Wire Normal Device ............................................................................................................. 10 Chapter 5 Activation ................................................................................................................. 11 5.1 Activate via Device ............................................................................................................... 11 5.2 Activate via Web Browser .................................................................................................... 12 5.3 Activate via SADP ................................................................................................................. 13 5.4 Activate Device via iVMS-4200 Client Software ................................................................... 14 Chapter 6 Quick Operation ....................................................................................................... 16 6.1 Select Language ................................................................................................................... 16 6.2 Set Application Mode .......................................................................................................... 17 6.3 Set Network Parameters ...................................................................................................... 18 6.4 Access to Platform ............................................................................................................... 19 6.5 Privacy Settings .................................................................................................................... 20 6.6 Set Administrator ................................................................................................................. 21 Chapter 7 Basic Operation ........................................................................................................ 24 7.1 Login .................................................................................................................................... 24 ix DS-K1T320 Series Face Recogintion Terminal User Manual 7.1.1 Login by Administrator ................................................................................................ 24 7.1.2 Login by Activation Password ...................................................................................... 25 7.1.3 Forgot Password .......................................................................................................... 25 7.2 Communication Settings ...................................................................................................... 25 7.2.1 Set Wired Network Parameters .................................................................................. 25 7.2.2 Set Wi-Fi Parameters ................................................................................................... 26 7.2.3 Set ISUP Parameters .................................................................................................... 27 7.2.4 Platform Access ........................................................................................................... 29 7.3 User Management ............................................................................................................... 29 7.3.1 Add Administrator ....................................................................................................... 29 7.3.2 Add Face Picture ......................................................................................................... 31 7.3.3 Add Fingerprint ........................................................................................................... 32 7.3.4 Add Card ..................................................................................................................... 33 7.3.5 View PIN code ............................................................................................................. 34 7.3.6 Set Authentication Mode ............................................................................................ 35 7.3.7 Edit User ...................................................................................................................... 36 7.4 Data Management ............................................................................................................... 36 7.4.1 Delete Data ................................................................................................................. 36 7.4.2 Import Data ................................................................................................................. 36 7.4.3 Export Data ................................................................................................................. 37 7.5 Identity Authentication ........................................................................................................ 37 7.5.1 Authenticate via Single Credential .............................................................................. 38 7.5.2 Authenticate via Multiple Credential .......................................................................... 38 7.6 Basic Settings ....................................................................................................................... 39 7.7 Set Biometric Parameters .................................................................................................... 40 7.8 Set Access Control Parameters ............................................................................................ 41 7.9 Time and Attendance Status Settings .................................................................................. 42 7.9.1 Disable Attendance Mode via Device ......................................................................... 42 x DS-K1T320 Series Face Recogintion Terminal User Manual 7.9.2 Set Manual Attendance via Device ............................................................................. 43 7.9.3 Set Auto Attendance via Device .................................................................................. 44 7.9.4 Set Manual and Auto Attendance via Device .............................................................. 46 7.10 System Maintenance .......................................................................................................... 47 Chapter 8 Configure the Device via the Mobile Browser ........................................................... 49 8.1 Login .................................................................................................................................... 49 8.2 Search Event ........................................................................................................................ 49 8.3 User Management ............................................................................................................... 49 8.4 Configuration ....................................................................................................................... 51 8.4.1 View Device Information ............................................................................................. 51 8.4.2 Time Settings ............................................................................................................... 53 8.4.3 Set DST ........................................................................................................................ 53 8.4.4 View Open Source Software License ........................................................................... 55 8.4.5 User Management ...................................................................................................... 55 8.4.6 Upgrade and Maintenance ......................................................................................... 55 8.4.7 Security Settings .......................................................................................................... 56 8.4.8 Network Settings ......................................................................................................... 56 8.4.9 General Settings .......................................................................................................... 61 8.4.10 Face Parameters Settings .......................................................................................... 67 8.4.11 Access Control Settings ............................................................................................. 70 8.5 Door Operation .................................................................................................................... 72 Chapter 9 Select Language ........................................................................................................ 73 Chapter 10 Time Settings .......................................................................................................... 74 Chapter 11 Environment Settings .............................................................................................. 75 Chapter 12 Privacy Settings ...................................................................................................... 76 Chapter 13 Administrator Settings ............................................................................................ 77 Chapter 14 Operation via Web Browser .................................................................................... 78 14.1 Login .................................................................................................................................. 78 xi DS-K1T320 Series Face Recogintion Terminal User Manual 14.2 Forget Password ................................................................................................................. 78 14.3 Live View ............................................................................................................................ 78 14.4 Person Management .......................................................................................................... 80 14.5 Search Event ...................................................................................................................... 81 14.6 Configuration ..................................................................................................................... 82 14.6.1 Set Local Parameters ................................................................................................. 82 14.6.2 View Device Information ........................................................................................... 82 14.6.3 Set Time .................................................................................................................... 83 14.6.4 Set DST ...................................................................................................................... 83 14.6.5 Change Administrator's Password ............................................................................. 84 14.6.6 View Device Arming/Disarming Information ............................................................ 84 14.6.7 Network Settings ....................................................................................................... 85 14.6.8 Set Video and Audio Parameters .............................................................................. 88 14.6.9 Set Image Parameters ............................................................................................... 89 14.6.10 Access Control Settings ........................................................................................... 89 14.6.11 Card Settings ........................................................................................................... 92 14.6.12 Set Privacy Parameters ............................................................................................ 93 14.6.13 Time and Attendance Settings ................................................................................ 94 14.6.14 Set Biometric Parameters ....................................................................................... 97 14.6.15 Set Preference ....................................................................................................... 100 14.6.16 Upgrade and Maintenance ................................................................................... 100 14.6.17 Device Debugging ................................................................................................. 101 14.6.18 Log Query .............................................................................................................. 101 14.6.19 Security Mode Settings ......................................................................................... 102 14.6.20 Certificate Management ....................................................................................... 102 Chapter 15 Client Software Configuration ............................................................................... 104 15.1 Configuration Flow of Client Software ............................................................................. 104 15.2 Device Management ........................................................................................................ 104 xii DS-K1T320 Series Face Recogintion Terminal User Manual 15.2.1 Add Device .............................................................................................................. 105 15.2.2 Reset Device Password ........................................................................................... 107 15.2.3 Manage Added Devices .......................................................................................... 108 15.3 Group Management ......................................................................................................... 109 15.3.1 Add Group ............................................................................................................... 109 15.3.2 Import Resources to Group ..................................................................................... 109 15.4 Person Management ........................................................................................................ 110 15.4.1 Add Organization .................................................................................................... 110 15.4.2 Import and Export Person Identify Information ...................................................... 110 15.4.3 Get Person Information from Access Control Device .............................................. 113 15.4.4 Issue Cards to Persons in Batch ............................................................................... 113 15.4.5 Report Card Loss ..................................................................................................... 114 15.4.6 Set Card Issuing Parameters .................................................................................... 114 15.5 Configure Schedule and Template ................................................................................... 115 15.5.1 Add Holiday ............................................................................................................. 116 15.5.2 Add Template .......................................................................................................... 116 15.6 Set Access Group to Assign Access Authorization to Persons .......................................... 118 15.7 Configure Advanced Functions ........................................................................................ 120 15.7.1 Configure Device Parameters .................................................................................. 120 15.7.2 Configure Device Parameters .................................................................................. 126 15.8 Door Control .................................................................................................................... 129 15.8.1 Control Door Status ................................................................................................. 129 15.8.2 Check Real-Time Access Records ............................................................................ 130 Appendix A. Tips for Scanning Fingerprint ............................................................................... 137 Appendix B. Tips When Collecting/Comparing Face Picture .................................................... 139 Appendix C. Tips for Installation Environment ........................................................................ 141 Appendix D. Communication Matrix and Device Command .................................................... 143 Chapter 16 Select Language .................................................................................................... 132 xiii DS-K1T320 Series Face Recogintion Terminal User Manual Chapter 17 Time Settings ........................................................................................................ 133 Chapter 18 Environment Settings ............................................................................................ 134 Chapter 19 Privacy Settings ..................................................................................................... 135 Chapter 20 Administrator Settings .......................................................................................... 136 xiv DS-K1T320 Series Face Recogintion Terminal User Manual Chapter 1 Overview Face recognition terminal is a kind of access control device for face recognition, which is mainly applied in security access control systems, such as logistic centers, airports, university campuses, alarm centrals, dwellings, etc. 1.1 Overview 1.2 Features 2.4-inch LCD screen, 2 MP lens Multiple authentication methods, including face, fingerprint, card, and PIN, etc Supports Mifare card or EM card according to different models Max. 500 faces, 1,000 cards, 1,000 fingerprints and 100,000 events Face recognition duration < 0.2 s/User Supports ISAPI and ISUP 5.0 protocols Configuration via the web client 1 DS-K1T320 Series Face Recogintion Terminal User Manual Chapter 2 Appearance The appearance of the device with fingerprint is as follows:

The appearance of the device without fingerprint is as follows:

Figure 2-1 AppearanceWith Fingerprint) Figure 2-2 AppearanceWithout Fingerprint) Table 2-1 Appearance Description No. Name 1 2 3 Screen Keypad Fingerprint Module 2 DS-K1T320 Series Face Recogintion Terminal User Manual No. Name Note Only devices that support the fingerprint function contain a fingerprint module. 4 5 6 7 8 9 10 11 Card Swiping Area Camera Supplement Light USB Interface Network Interface Tamper Wiring Terminal (Including Power Supply Interface) Debugging Port (For Debugging Only) 3 DS-K1T320 Series Face Recogintion Terminal User Manual Chapter 3 Installation 3.1 Installation Environment Indoor use only. Avoid backlight, direct sunlight, and indirect sunlight. For better recognition, there should be light source in or near the installation environment. The minimum bearing weight of the wall or other places should be 3 times heavier than the device weight. 3.2 Install with Gang Box Steps 1. Make sure the gang box is installed on the wall. Note You should purchase the gang box separately. 2. Secure the mounting plate on the gang box with two supplied screws (SC-KA4X22). Figure 3-1 Install Gang Box 3. Route the cable through the cable hole, wire the cables and insert the cables in the gang box. Figure 3-2 Install Mounting Plate 4 DS-K1T320 Series Face Recogintion Terminal User Manual 4. Align the device with the mounting plate, and secure the device on the mounting plate with 1 supplied screw (SC-CM4X14-5T10-SUSS). Figure 3-3 Apply Silicone Sealant Figure 3-4 Secure Device 3.3 Surface Mounting Steps Note The additional force shall be equal to three times the weight of the equipment. The equipment ad its associated mounting means shall remain secure during the installation. After the installation, the equipment, including any associated mounting plate, shall not be damaged. 1. According to the datum line on the mounting template, stick the mounting template on the wall or other surfaces, 1.4 meters higher than the ground. 5 DS-K1T320 Series Face Recogintion Terminal User Manual Figure 3-5 Mounting Template 2. Drill holes on the wall or other surface according to the Hole 1 on the mounting template. 3. Remove the cable hole on the mounting plate with tools. 4. Align the holes to the mounting plate and secure the mounting plate on the wall with the 4 supplied screws (SC-KA4X22). 5. Route the cable through the cable hole of the mounting plate, and connect to corresponding Figure 3-6 Install Mounting Plate peripherals cables. Note If the device is installed outdoor, you should apply silicone sealant to the wiring exit to avoid water from entering. 6 DS-K1T320 Series Face Recogintion Terminal User Manual 6. Align the device with the mounting plate and hang the device on the mounting plate. Use 1 supplied screw (SC-CM4X14_5T10-SUSS) to secure the device and the mounting plate. Figure 3-7 Apply Silicone Sealant Figure 3-8 Hang Device 7. After installation, for the proper use of the device (outdoor use), stick the protection film (parts of models supplied) on the screen. 3.4 Base Mounting Steps 1. Route the cables through the cable hole of the bracket, and connect the terminals with peripherals cables. Place the bracket close to the back side of the device. Figure 3-9 Place Bracket Close to Device Back Side 2. Press the bracket with both hands, and make sure that the buckle of the bracket fits with the back side of the device. Fasten the bracket in the direction of the arrow. 7 DS-K1T320 Series Face Recogintion Terminal User Manual 3. Buckle into the bracket to the end to complete the installation. Figure 3-10 Fasten Bracket Figure 3-11 Complete Installation 8 DS-K1T320 Series Face Recogintion Terminal User Manual Chapter 4 Wiring You can connect the NC/NO and COM terminal with the door lock, connect the SEN and GND terminal with the door contact and the BTN/GND terminal with the exit button. If cable size is 18 AWG, you should use a 12 V power supply. And the distance between the power supply and the device should be no more than 20 m. If the cable size is 15 AWG, you should use a 12 V power supply. And the distance between the power supply and the device should be no more than 30 m. If the cable size is 12 AWG, you should use a 12 V power supply. And the distance between the power supply and the device should be no more than 40 m. The external card reader, door lock, exit button, and door magnetic need individual power Note supply. 4.1 Terminal Description The terminals contains power input and door lock. The descriptions of the terminals are as follows:

Table 4-1 Terminal Descriptions Group No. Function Color Name Description Group A Power Input Red

+12 V Group B Door Lock White/Purple NC Black GND Ground 12 VDC Power Supply Lock Wiring

(NC) Common Lock Wiring

(NO) Ground Exit Door Wiring White/Yellow COM White/Red NO Yellow/Green SENSOR Door Contact Black GND Yellow/Grey BUTTON A1 A2 B1 B2 B3 B4 B5 B6 9 DS-K1T320 Series Face Recogintion Terminal User Manual 4.2 Wire Normal Device You can connect the terminal with normal peripherals. Figure 4-1 Device Wiring Note connection. Do not wire the device to the electric supply directly. When connecting door contact and exit button, the device should use the same common ground The suggested external power supply for door lock is 12 V, 1 A 10 DS-K1T320 Series Face Recogintion Terminal User Manual Chapter 5 Activation You should activate the device before the first login. After powering on the device, the system will switch to Device Activation page. Activation via the device, SADP tool and the client software are supported. The default values of the device are as follows:

The default IP address: 192.0.0.64 The default port No.: 8000 The default user name: admin 5.1 Activate via Device If the device is not activated, you can activate the device after it is powered on. On the Activate Device page, create a password and confirm the password. Tap Activate and the device will activated. Figure 5-1 Activation Page 11 DS-K1T320 Series Face Recogintion Terminal User Manual Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product. Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user. Note Settings . Characters containing admin and nimda are not supported to be set as activation password. After activation, you should select a language according to your actual needs. After activation, you should select an application mode. For details, see Set Application Mode . After activation, you should set the network. For details, see Set Network Parameters . After activation, you can add the device to the platform. For details, see Access to Platform . After activation, if you need to set privacy, you should check the item. For details, see Privacy After activation, if you need to add administrator to manage the device parameters, you should set administrator. For details, see Add Administrator . 5.2 Activate via Web Browser You can activate the device via the web browser. Steps 1. Enter the device default IP address (192.0.0.64) in the address bar of the web browser, and press Enter. Note Caution Make sure the device IP address and the computer's should be in the same IP segment. 2. Create a new password (admin password) and confirm the password. STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product. 12 DS-K1T320 Series Face Recogintion Terminal User Manual Note Characters containing admin and nimda are not supported to be set as activation password. 3. Click Activate. 4. Edit the device IP address. You can edit the IP address via the SADP tool, the device, and the client software. 5.3 Activate via SADP SADP is a tool to detect, activate and modify the IP address of the device over the LAN. Before You Start Get the SADP software from the supplied disk or the official website http://

www.hikvision.com/en/ , and install the SADP according to the prompts. The device and the PC that runs the SADP tool should be within the same subnet. The following steps show how to activate a device and modify its IP address. For batch activation and IP addresses modification, refer to User Manual of SADP for details. Steps 1. Run the SADP software and search the online devices. 2. Find and select your device in online device list. 3. Input new password (admin password) and confirm the password. STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product. Caution Note Characters containing admin and nimda are not supported to be set as activation password. 4. Click Activate to start activation. 13 DS-K1T320 Series Face Recogintion Terminal User Manual Status of the device becomes Active after successful activation. 5. Modify IP address of the device. 1) Select the device. 2) Change the device IP address to the same subnet as your computer by either modifying the IP address manually or checking Enable DHCP. 3) Input the admin password and click Modify to activate your IP address modification. 5.4 Activate Device via iVMS-4200 Client Software For some devices, you are required to create the password to activate them before they can be added to the iVMS-4200 software and work properly. Steps Note This function should be supported by the device. on the right of Device Management and select Device. 1. Enter the Device Management page. 2. Click 3. Click Online Device to show the online device area. The searched online devices are displayed in the list. 4. Check the device status (shown on Security Level column) and select an inactive device. 5. Click Activate to open the Activation dialog. 6. Create a password in the password field, and confirm the password. 14 DS-K1T320 Series Face Recogintion Terminal User Manual Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product. Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user. Note 7. Click OK to activate the device. Characters containing admin and nimda are not supported to be set as activation password. 15 DS-K1T320 Series Face Recogintion Terminal User Manual Chapter 6 Quick Operation 6.1 Select Language You can select a language for the device system. After the device activation, you can select a language for the device system. By default, the system language is English. Figure 6-1 Select System Language 16 DS-K1T320 Series Face Recogintion Terminal User Manual Note After you change the system language, the device will reboot automatically. 6.2 Set Application Mode After activating the device, you should select an application mode for better device application. Steps 1. On the Welcome page, select Indoor or Others from the drop-down list. 2. Tap OK to save. Figure 6-2 Welcome Page 17 DS-K1T320 Series Face Recogintion Terminal User Manual Note You can also change the settings in System Settings. If you install the device indoors near the window or the face recognition function is not working well, select Others. If you do not configure the application mode and tap Next, the system will select Indoor by default. If you activate the device via other tools remotely, the system will select Indoor as the application mode by default. 6.3 Set Network Parameters After activation and select application mode, you can set the network for the device Steps 1. When you enter the Select Network page, tap Wired Network or Wi-Fi for your actual needs. Figure 6-3 Select Network Note 2. Tap Next. Disconnect the wired network before connecting a Wi-Fi. 18 DS-K1T320 Series Face Recogintion Terminal User Manual Wired Network Note Wi-Fi Make sure the device has connected to a network. If enable DHCP, the system will assign the IP address and other parameters automatically. If disable DHCP, you should set the IP address, the subnet mask, and the gateway. Select a Wi-Fi and enter the Wi-Fi's password to get connected. Or tap Add Wi-Fi and enter the Wi-Fi's name and the password to get connected. 3. Optional: Tap Skip to skip network settings. 6.4 Access to Platform Enable the function and the device can communicate via Hik-Connect. You can add the device to Hik-Connect modile client and so on. Steps 1. Enable Access to Hik-Connect, and set the Server IP and Verification Code. 19 DS-K1T320 Series Face Recogintion Terminal User Manual Figure 6-4 Access to Hik-Connect 2. Tap Next. Note 6.5 Privacy Settings If you tap Previous to return to the Wi-Fi configuration page, you need to tap the connected Wi-

Fi or connect another Wi-Fi to enter the platform page again. After activation, selecting application mode, and selecting network, you should set the privacy parameters, including the picture uploading and storage. 20 DS-K1T320 Series Face Recogintion Terminal User Manual Select parameters according to your actual needs. Figure 6-5 Privacy Upload Captured Pic. When Auth. (Upload Captured Picture When Authenticating) Upload the pictures captured when authenticating to the platform automatically. Save Captured Pic. When Auth. (Save Captured Picture When Authenticating) If you enable this function, you can save the picture when Authenticating to the device. Save Registered Pic. (Save Registered Picture) The registered face picture will be saved to the system if you enable the function. Upload Pic. After Linked Capture (Upload Picture After Linked Capture) Upload the pictures captured by linked camera to the platform automatically. Save Pic. After Linked Capture (Save Pictures After Linked Capture) If you enable this function, you can save the picture captured by linked camera to the device. Tap Next to complete the settings. 6.6 Set Administrator After device activation, you can add an administrator to manage the device parameters. 21 DS-K1T320 Series Face Recogintion Terminal User Manual Before You Start Activate the device and select an application mode. Steps 1. Optional: Tap Skip to skip adding administrator if required. 2. Enter the administrator's name (optional) and tap Next. Figure 6-6 Add Administrator Page 3. Select a credential to add. Note Up to one credential should be added.

: Face forward at the camera. Make sure the face is in the face recognition area. Click to capture and click to confirm.

: Press your finger according to the instructions on the device screen. Click

: Enter the card No. or present card on the card presenting area. Click OK. to confirm.

4. Click OK. You will enter the authentication page. Status Icon Description

Device is armed/not armed. 22 DS-K1T320 Series Face Recogintion Terminal User Manual

Note Hik-Connect is enabled/disabled. The device wired network is connected/not connected/connecting failed. The device' Wi-Fi is enabled and connected/not connected/enabled but not connected. Shortcut Keys Description You can configure those shortcut keys displayed on the screen. For details, see Basic Settings . Enter the device room No. and tap OK to call. Tap to call the center. Note Enter PIN code to authenticate. The device should be added to the center, or the calling operation will be failed. 23 DS-K1T320 Series Face Recogintion Terminal User Manual Chapter 7 Basic Operation 7.1 Login Login the device to set the device basic parameters. 7.1.1 Login by Administrator If you have added an administrator for the device, only the administrator can login the device for device operation. Steps 1. Long press OK to enter the admin login page. 2. Authenticate the administrator's face, fingerprint or card to enter the home page. Figure 7-1 Admin Login Note The device will be locked for 30 minutes after 5 failed fingerprint or card attempts. 3. Optional: Press OK and you can enter the device activation password for login. 4. Optional: Press ESC and you can exit the admin login page. 24 DS-K1T320 Series Face Recogintion Terminal User Manual 7.1.2 Login by Activation Password You should login the system before other device operations. If you do not configure an administrator, you should follow the instructions below to login. Steps 1. Long press OK to enter Authenticate via Admin page. 2. to enter the password. If you have added an administrator for the device, press OK and enter the password. If you haven't added an administrator for the device, enter the password. 3. Press OK to enter the home page. Press

Note The device will be locked for 30 minutes after 5 failed password attempts. 7.1.3 Forgot Password If you forget the password during authentication, you can change the password. Steps 1. Long press OK to enter Authenticate via Administrator page. 2. Press to enter the password entering page, and then press ESC. 3. Select Forgot Password. 4. Answer the security questions that configured when activation. 5. Create a new password and confirm it. 6. Press OK. 7.2 Communication Settings You can set the wired network, the Wi-Fi parameter, the RS-485 parameters, the Wiegand parameters, ISUP and access to Hik-Connect on the communication settings page. 7.2.1 Set Wired Network Parameters You can set the device wired network parameters, including the IP address, the subnet mask, the gateway, and DNS parameters. Steps 1. Select Basic Comm. (Communication) to enter the Communication settings page. 25 DS-K1T320 Series Face Recogintion Terminal User Manual 2. On the Communication page, select Wired Network. Figure 7-2 Wired Network Settings 3. Set IP Address, Subnet Mask, and Gateway.

- Enable DHCP, and the system will assign IP address, subnet mask, and gateway automatically.

- Disable DHCP, and you should set the IP address, subnet mask, and gateway manually. The device's IP address and the computer IP address should be in the same IP segment. 4. Set the DNS parameters. You can enable Auto Obtain DNS, set the preferred DNS server and the Note alternate DNS server. 7.2.2 Set Wi-Fi Parameters Steps Note You can enable the Wi-Fi function and set the Wi-Fi related parameters. The function should be supported by the device. 1. Select Basic Comm. (Communication) to enter the Communication settings page. 2. On the Communication settings page, select Wi-Fi. 26 DS-K1T320 Series Face Recogintion Terminal User Manual 3. Enable the Wi-Fi function. 4. Select a Wi-Fi from the list, and enter the Wi-Fi's password. Tap OK. Figure 7-3 Wi-Fi Settings Note Only digits, letters, and special characters are allowed in the password. 5. Set the Wi-Fi's parameters.

- By default, DHCP is enable. The system will allocate the IP address, the subnet mask, and the gateway automatically. If disable DHCP, you should enter the IP address, the subnet mask, and the gateway manually.

6. Press OK to save the settings and go back to the Wi-Fi tab. 7. Press ESC to save the network parameters. 7.2.3 Set ISUP Parameters Set ISUP parameters and the device can upload data via ISUP protocol. Before You Start Make sure your device has connect to a network. Steps 1. Select Comm. ISUP . 27 DS-K1T320 Series Face Recogintion Terminal User Manual 2. Enable the ISUP function and set the ISUP server parameters. Figure 7-4 ISUP Settings Set the ISUP version according to your actual needs. ISUP Version Central Group Main Channel Support N1 or None. Enable central group and the data will be uploaded to the center group. Enable ISUP function and the data will be uploaded via ISUP protocol. Address Type Select an address type according to your actual needs. ISUP IP Port Set the ISUP server's IP address. Set the ISUP server's port No. Note Port No. Range: 1 to 65535. Device ID ISUP Key Set device serial no. 28 DS-K1T320 Series Face Recogintion Terminal User Manual If you choose V5.0, you should create an account and ISUP key. If you choose other version, you should create an ISUP account only. Note Remember the ISUP account and ISUP key. You should enter the account name or the key when the device should communicate with other platforms via ISUP protocol. ISUP key range: 8 to 16 characters. 7.2.4 Platform Access You can change the device verification code and set the server address before you add the device to the Hik-Connect mobile client. Before You Start Make sure your device has connected to a network. Steps 1. Select Comm. (Communication) on the Home page to enter the Communication settings page. 2. On the Communication settings page, select Hik-Connect. 3. Enable Hik-Connect 4. Enter Server IP. 5. Create the Verification Code, and you need to enter the verification code when you manage the devices via Hik-Connect. 7.3 User Management 7.3.1 Add Administrator On the user management interface, you can add, edit, delete and search the user. The administrator can log in the device backend and configure the device parameters. Steps 1. Long tap on the initial page and log in the backend. 2. Select User Add User to enter the Add User page. 29 DS-K1T320 Series Face Recogintion Terminal User Manual 3. Edit the employee ID. Note The employee ID should be less than 32 characters. And it can be a combination of lower letters, upper letters, and numbers. The employee ID should not be duplicated. 4. Select the Name field and input the user name on the keyboard. Numbers, upper case letters, lower case letters, and special characters are allowed in the user Note name. Note Note Up to 128 characters are allowed in the user name. 5. Optional: Add a face picture, fingerprints, cards, or Pin for the user. For details about adding a face picture, see Add Face Picture . For details about adding a fingerprint, see Add Fingerprint . For details about adding a card, see Add Card . For details about adding a password, see View PIN code . 6. Optional: Set the user's authentication type. Note 7. Set the user role. For details about setting the authentication type, see Set Authentication Mode . 30 DS-K1T320 Series Face Recogintion Terminal User Manual Administrator Normal User The user is the administrator. Except for the normal attendance function, the user can also enter the Home page to operate after authenticating the permission. The User is the normal user. The user can only authenticate or take attendance on the initial page. 8. Press ESC and then press OK to save the settings. Add user's face picture to the device. And the user can use the face picture to authenticate. 7.3.2 Add Face Picture Steps Note Up to 500 face pictures can be added. 1. Long press OK and login the device. 2. Select User Add User to enter the Add User page. 3. Edit the employee ID. Note Note name. The employee ID should be less than 32 characters. And it can be a combination of lower letters, upper letters, and numbers. The employee ID should not be duplicated. 4. Select the Name field and input the user name on the keyboard. Numbers, upper case letters, lower case letters, and special characters are allowed in the user The suggested user name should be within 128 characters. 5. Select the Face field to enter the face picture adding page. 31 DS-K1T320 Series Face Recogintion Terminal User Manual Figure 7-5 Add Face Picture 6. Look at the camera. Note Make sure your face picture is in the face picture outline when adding the face picture. Make sure the captured face picture is in good quality and is accurate. For details about the instructions of adding face pictures, see Tips When Collecting/

Comparing Face Picture . After completely adding the face picture, a captured face picture will be displayed at the center of the page. 7. Press OK to save the face picture. 8. Optional: Press ESC to select Retake and adjust your face position to add the face picture again. 9. Set the user role. Administrator The user is the administrator. Except for the normal attendance function, the user can also enter the Home page to operate after authenticating the permission. Normal User The User is the normal user. The user can only authenticate or take attendance on the initial page. 10. Press ESC and then press OK to save the settings. 7.3.3 Add Fingerprint Add a fingerprint for the user and the user can authenticate via the added fingerprint. 32 DS-K1T320 Series Face Recogintion Terminal User Manual Steps Note The function should be supported by the device. Up to 5000 fingerprints can be added. 1. Long press OK and login the device. 2. Press User Add User to enter the Add User page. 3. Select the Employee ID field and edit the employee ID. Note Note name. Note The employee ID should be less than 32 characters. And it can be a combination of lower letters, upper letters, and numbers. The employee ID should not start with 0 and should not be duplicated. 4. Select the Name field and input the user name on the keyboard. Numbers, upper case letters, lower case letters, and special characters are allowed in the user The suggested user name should be within 128 characters. 5. Select the Fingerprint field to enter the Fingerprint page. 6. Follow the instructions to add a fingerprint. The same fingerprint cannot be repeatedly added. Up to 10 fingerprints can be added for one user. You can also use the client software or the fingerprint recorder to record fingerprints. For details about the instructions of scanning fingerprints, see Tips for Scanning Fingerprint . The user is the administrator. Except for the normal attendance function, the user can also enter the Home page to operate after authenticating the permission. The User is the normal user. The user can only authenticate or take attendance on the initial page. 8. Press ESC and then press OK to save the settings. 7. Set the user role. Administrator Normal User 7.3.4 Add Card Add a card for the user and the user can authenticate via the added card. 33 DS-K1T320 Series Face Recogintion Terminal User Manual Steps Note Note Note name. Note The device supports MIFARE card, FILECA card, and DESfire card. 1. Long press OK and login the device. 2. Select User Add User to enter the Add User page. 3. Select the Employee ID field and edit the employee ID. The employee ID should be less than 32 characters. And it can be a combination of lower letters, upper letters, and numbers. The employee ID should not be duplicated. 4. Select the Name field and input the user name on the keyboard. Numbers, upper case letters, lower case letters, and special characters are allowed in the user The suggested user name should be within 128 characters. 5. Select the Card field and press OK to enter the Add Card page. 6. Configure the card No.

- Enter the card No. manually.

- Present the card over the card swiping area to get the card No. The card No. cannot be empty. Up to 20 characters are allowed in the card No. The card No. cannot be duplicated. 7. Configure the card type. 8. Set the user role. Administrator Normal User The user is the administrator. Except for the normal attendance function, the user can also enter the Home page to operate after authenticating the permission. The User is the normal user. The user can only authenticate or take attendance on the initial page. 9. Press ESC and then press OK to save the settings. 7.3.5 View PIN code Add a PIN code for the user and the user can authenticate via the PIN code. 34 DS-K1T320 Series Face Recogintion Terminal User Manual Steps 1. Long press OK and login the device. 2. Select User Add User to enter the Add User page. 3. Edit the employee ID. Note Note name. Note The employee ID should be less than 32 characters. And it can be a combination of lower letters, upper letters, and numbers. The employee ID should not be duplicated. 4. Select the Name field and input the user name on the keyboard. Numbers, upper case letters, lower case letters, and special characters are allowed in the user The suggested user name should be within 128 characters. 5. Select the PIN field to view the PIN code. The PIN code cannot be edited. It can only be applied by the platform. 6. Set the user role. Administrator Normal User The user is the administrator. Except for the normal attendance function, the user can also enter the Home page to operate after authenticating the permission. The User is the normal user. The user can only authenticate or take attendance on the initial page. 7. Press ESC and then press OK to save the settings. 7.3.6 Set Authentication Mode After adding the user's face picture, password, or other credentials, you should set the authentication mode and the user can authenticate his/her identity via the configured authentication mode. Steps 1. Long press OK and login the device. 2. Select User Add User Auth. Settings . 3. Select Device or Custom as the authentication mode. Device If you want to select device mode, you should set the terminal authentication mode in Access Control Settings page first. For details see Setting Access Control Parameters. 35 DS-K1T320 Series Face Recogintion Terminal User Manual You can combine different authentication modes together according to your actual needs. Custom 4. Press ESC to save the settings. 7.3.7 Edit User After adding the user, you can edit it. Edit User On the User Management page, select a user from the User List to enter the User Information page. Follow the steps in User Management to edit the user parameters. Press ESC to save the settings. Note The employee ID cannot be edited. 7.4 Data Management You can delete data, import data, and export data. 7.4.1 Delete Data Delete user data. 7.4.2 Import Data On the Home page, select Data Delete Data User Data . All user data added in the device will be deleted. Steps 1. Plug a USB flash drive in the device. 2. On the Home page, tap Data Import Data . 3. Tap User Data, Face Data or Access Control Parameters . Note The imported access control parameters are configuration files of the device. 4. Enter the created password when you exported the data. If you do not create a password when you exported the data, leave a blank in the input box and tap OK immediately. 36 DS-K1T320 Series Face Recogintion Terminal User Manual Note If you want to transfer all user information from one device (Device A) to another (Device B), you should export the information from Device A to the USB flash drive and then import from the USB flash drive to Device B. In this case, you should import the user data before importing the profile photo. The supported USB flash drive format is FAT32. The imported pictures should be saved in the folder (named enroll_pic) of the root directory and the picture's name should be follow the rule below:

Card No._Name_Department_Employee ID_Gender.jpg If the folder enroll_pic cannot save all imported pictures, you can create another folders, named enroll_pic1, enroll_pic2, enroll_pic3, enroll_pic4, under the root directory. The employee ID should be less than 32 characters. It can be a combination of lower letters, upper letters, and numbers. It should not be duplicated, and should not start with 0. Requirements of face picture should follow the rules below: It should be taken in full-face view, directly facing the camera. Do not wear a hat or head covering when taking the face picture. The format should be JPEG or JPG. The resolution should be more than 640 480 pixel and less than 2160 3840 pixel. The picture size should be between 40 KB and 200 KB. 7.4.3 Export Data Steps 1. Plug a USB flash drive in the device. 2. On the Home page, tap Data Export Data . 3. Tap Face Data, Event Data, User Data, or Access Control Parameters. Note Note The exported access control parameters are configuration files of the device. 4. Optional: Create a password for exporting. When you import those data to another device, you should enter the password. The supported USB flash drive format is DB. The system supports the USB flash drive with the storage of 1G to 32G. Make sure the free space of the USB flash drive is more than 512M. The exported user data is a DB file, which cannot be edited. 7.5 Identity Authentication After network configuration, system parameters configuration and user configuration, you can go back to the initial page for identity authentication. The system will authenticate person according to the configured authentication mode. 37 DS-K1T320 Series Face Recogintion Terminal User Manual 7.5.1 Authenticate via Single Credential Set the user authentication type before authentication. For details, see Set Authentication Mode . Authenticate face, fingerprint, card or PIN. Face Face forward at the camera and start authentication via face. Place the enrolled fingerprint on the fingerprint module and start authentication via fingerprint. Present the card on the card swiping area and start authentication via card. The card can be normal IC card, or encrypted card. Enter the pin code to authenticate via PIN code. If authentication completed, a prompt "Authenticated" will pop up. 7.5.2 Authenticate via Multiple Credential Before You Start Set the user authentication type before authentication. For details, see Set Authentication Mode . Steps 1. If the authentication mode is Card and Face, Password and Face, Card and Password, Card and Face and Fingerprint, authenticate any credential according to the instructions on the live view page. The card can be normal IC card, or encrypted card. 2. After the previous credential is authenticated, continue authenticate other credentials. For detailed information about scanning fingerprint, see Tips for Scanning Fingerprint. For detailed information about authenticating face, see Tips When Collecting/Comparing Face If authentication succeeded, the prompt "Authenticated" will pop up. Fingerprint Card Note PIN Code Note Note Picture. 38 DS-K1T320 Series Face Recogintion Terminal User Manual 7.6 Basic Settings You can set the voice, time, sleeping (s), language, supplement light, community No., building No., and unit No. Long press OK and login the device. Select Basic to enter System Settings page. Then select Basic to enter Basic Settings page. Set the device sleeping waiting time (s). For example, when you are on the initial page and if you set the sleeping time to 30 s, the device will sleep after 30 s without any operation. Figure 7-6 Basic Settings Page Voice Settings Time Settings Sleeping (s) You can enable/disable the voice function. Set the time zone, the device time and the DST. Note 20 s to 999 s are available to configure. Select the language according to actual needs. Select Language Supplement Light Community No. Set the white light mode, brightness, start time and end time. 39 DS-K1T320 Series Face Recogintion Terminal User Manual Set the device installed community No. Building No. Unit No. Set the device installed building No. Set the device installed unit No. 7.7 Set Biometric Parameters You can customize the face parameters to improve the face recognition performance. The configurable parameters includes application mode, face liveness level, face recognition distance, face recognition interval, face 1:N security level, face 1:1 security level and face with mask detection. Long press OK and login the device. Select Basic to enter System Settings page. Then select Biometrics to enter Biometrics settings page. Table 7-1 Face Picture Parameters Parameter Description Application Mode Select either others or indoor according to actual environment. Face Liveness Level After enabling face anti-spoofing function, you can set the matching security level when performing live face authentication. Face Recognition Distance Face Recognition Interval Set the valid distance between the user and the camera when authenticating. The time interval between two continuous face recognitions when authenticating. Note You can input the number from 1 to 10. Face 1:N Security Level Set the matching threshold when authenticating via 1:N matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. Face 1:1 Security Level Set the matching threshold when authenticating via 1:1 matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. Face with Mask Detection After enabling the face with mask detection, the system will recognize the captured face with mask picture. You can set face with mask & face 1:1 level and 1:N level and the strategy. 40 DS-K1T320 Series Face Recogintion Terminal User Manual Parameter Description Reminder of Wearing If the person do not wear a face mask when authenticating, the device prompts a notification and the door will open. Must Wear None If the person do not wear a face mask when authenticating, the device prompts a notification and the door keeps closed. If the person do not wear a face mask when authenticating, the device will not prompt a notification. 7.8 Set Access Control Parameters You can set the access control permissions, including the functions of authentication mode, enable NFC card, door contact, open duration (s) and authentication interval (s). On the home page, select ACS (Access Control Settings) to enter the Access Control Settings page. Edit the access control parameters on this page. The available parameters descriptions are as follows:

Figure 7-7 Access Control Parameters 41 DS-K1T320 Series Face Recogintion Terminal User Manual Table 7-2 Access Control Parameters Descriptions Description Parameter Terminal Auth. Mode Select the face recognition terminal's authentication mode. You can also customize the authentication mode. Note Only the device with the fingerprint module supports the fingerprint related function. Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher security level, use multiple authentication modes. If you adopt multiple authentication modes, you should authenticate other methods before authenticating face. Enable the function and you can present the NFC card to authenticate. You can select "Remain Open" or "Remain Closed" according to your actual needs. By default, it is "Remain Closed". Set the door unlocking duration. If the door is not opened for the set time, the door will be locked. Available door locked time range: 1 to 255s. Set the device authenticating interval. Available authentication interval range: 0 to 65535. Enable NFC Card Door Contact Open Duration Authentication Interval 7.9 Time and Attendance Status Settings You can set the attendance mode as check in, check out, break out, break in, overtime in, and overtime out according to your actual situation. Note The function should be used cooperatively with time and attendance function on the client software. 7.9.1 Disable Attendance Mode via Device Disable the attendance mode and the system will not display the attendance status on the initial page. Select T&A to enter the T&A Status page. 42 DS-K1T320 Series Face Recogintion Terminal User Manual Figure 7-8 Disable Attendance Mode Set the Attendance Mode as Disable. You will not view or configure the attendance status on the initial page. And the system will follow the attendance rule that configured on the platform. 7.9.2 Set Manual Attendance via Device Set the attendance mode as manual, and you should select a status manually when you take attendance. Before You Start Add at least one user, and set the user's authentication mode. For details, see User Management. Steps 1. Select T&A to enter the T&A Status page. 2. Set the Attendance Mode as Manual. 43 DS-K1T320 Series Face Recogintion Terminal User Manual Figure 7-9 Manual Attendance Mode 3. Enable the Attendance Status Required. 4. Enable a group of attendance status. The Attendance Property will not be changed. 5. Optional: Select an status and change its name if required. The name will be displayed on the T & A Status page and the authentication result page. You should select an attendance status manually after authentication. Note Result Note If you do not select a status, the authentication will be failed and it will not be marked as a valid attendance. 7.9.3 Set Auto Attendance via Device Set the attendance mode as auto, and you can set the attendance status and its available schedule. The system will automatically change the attendance status according to the configured schedule. Before You Start Add at least one user, and set the user's authentication mode. For details, see User Management. Steps 1. Tap T&A Status to enter the T&A Status page. 2. Set the Attendance Mode as Auto. 44 DS-K1T320 Series Face Recogintion Terminal User Manual Figure 7-10 Auto Attendance Mode 3. Enable the Attendance Status Required function. 4. Enable a group of attendance status. Note The Attendance Property will not be changed. 5. Optional: Select an status and change its name if required. The name will be displayed on the T & A Status page and the authentication result page. 6. Set the status' schedule. 1) Select Attendance Schedule. 2) Select Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, or Sunday. 3) Set the selected attendance status's start time of the day. 4) Press OK. 5) Repeat step 1 to 4 according to your actual needs. The attendance status will be valid within the configured schedule. Note Result When you authenticate on the initial page, the authentication will be marked as the configured attendance status according to the configured schedule. Example If set the Break Out as Monday 11:00, and Break In as Monday 12:00, the valid user's authentication from Monday 11:00 to 12:00 will be marked as break. 45 DS-K1T320 Series Face Recogintion Terminal User Manual 7.9.4 Set Manual and Auto Attendance via Device Set the attendance mode as Manual and Auto, and the system will automatically change the attendance status according to the configured schedule. At the same time you can manually change the attendance status after the authentication. Before You Start Add at least one user, and set the user's authentication mode. For details, see User Management. Steps 1. Select T&A to enter the T&A Status page. 2. Set the Attendance Mode as Manual and Auto. Figure 7-11 Manual and Auto Mode 3. Enable the Attendance Status Required function. 4. Enable a group of attendance status. Note The Attendance Property will not be changed. 5. Optional: Select an status and change its name if required. The name will be displayed on the T & A Status page and the authentication result page. 6. Set the status' schedule. 1) Select Attendance Schedule. 2) Select Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, or Sunday. 3) Set the selected attendance status's start time of the day. 4) Press OK. 5) Repeat step 1 to 4 according to your actual needs. 46 DS-K1T320 Series Face Recogintion Terminal User Manual The attendance status will be valid within the configured schedule. Note Result On the initial page and authenticate. The authentication will be marked as the configured attendance status according to the schedule. If you tap the edit icon on the result tab, you can select a status to take attendance manually, the authentication will be marked as the edited attendance status. Example If set the Break Out as Monday 11:00, and Break In as Monday 12:00, the valid user's authentication from Monday 11:00 to 12:00 will be marked as break. 7.10 System Maintenance You can view the device system information and capacity. You can also upgrade device, restore the system to factory settings, default settings, and reboot the system. Long press OK and login the device. Select Maint. to enter System Maintenance page. System Information Figure 7-12 Maintenance Page You can view the device information including device model, serial No., firmware version, MAC address, production data and open source code license. 47 DS-K1T320 Series Face Recogintion Terminal User Manual Capacity Note Note Device Upgrade The page may vary according to different device models. Refers to the actual page for details. You can view the number of user, face picture, card, and event. Parts of the device models support displaying the fingerprint number. Refers to the actual page for details. Plug the USB flash drive in the device USB interface. Select Upgrade OK , and the device will read the digicap.dav file in the USB flash drive to start upgrading. Restore to Factory Settings Restore to Default Settings All parameters will be restored to the factory settings. The system will reboot to take effect. All parameters, except for the communication settings, remotely imported user information, will be restored to the default settings. The system will reboot to take effect. Reboot The device will reboot after the confirmation. Select

, long press OK, and enter admin password to view device version information. 48 DS-K1T320 Series Face Recogintion Terminal User Manual Chapter 8 Configure the Device via the Mobile Browser 8.1 Login Note You can login via mobile browser. Parts of the model supports Wi-Fi settings. Make sure the device is activated. Obtain the IP address from the device after Wi-Fi is enabled. Make sure the IP segment of the device and the computer is the same. For details, refers to Set Wi-Fi Parameters . Enter the device IP address in the address bar of the mobile browser and press Enter to enter the login page. Enter the device user name and the password. Tap Login. 8.2 Search Event Tap Search to enter the Search page. Enter the search conditions, including the employee ID, the name, the card No., the start time, and the end time, and tap Search. Note Support searching for names within 32 digits. 8.3 User Management Steps 1. Tap User to enter the settings page. 2. Add user. 1) Tap+. You can add, edit, delete, and search users via mobile Web browser. 49 DS-K1T320 Series Face Recogintion Terminal User Manual Figure 8-1 Add User 50 DS-K1T320 Series Face Recogintion Terminal User Manual Enter the employee ID. The employee ID cannot be 0 or exceed 32 characters. It can be a combination of uppercase, lowercase letters and numbers. Enter the name. The name supports numbers, uppercase and lowercase English, and characters. The name is recommended to be within 32 characters. 2) Set the following parameters. Employee ID Name Gender User Role Select the gender. Select your user role. Floor No./Room No. Enter the floor No./room No. Face Card No. Enter the card No. Fingerprint Start Date/End Date Administrator Authentication Type Set the authentication type. 3) Tap Save. 8.4 Configuration 8.4.1 View Device Information Add Face picture. Tap Face, then tap Import, and select the mode to import the face. Add fingerprint. Tap Fingerprint, then tap +, and add fingerprint via the fingerprint module. Set Start Date and End Date of user permission. If the user needs to be set as administrator, you can enable Administrator. 3. Tap the user that needs to be edited in the user list to edit the information. 4. Tap the user that needs to be deleted in the user list, and tap 5. You can search the user by entering the employee ID or name in the search bar. to delete the user. You can view the device name, device No., language, model, serial No., version, device capacity, etc. 51 DS-K1T320 Series Face Recogintion Terminal User Manual Tap Configuration System System Settings Basic Information , to enter the settings page. Figure 8-2 Device Information 52 DS-K1T320 Series Face Recogintion Terminal User Manual You can view the device name, device No., language, model, serial No., version, device capacity, etc. 8.4.2 Time Settings Set the time zone, time sync. mode, and displayed time. Tap Configuration System System Settings Time Settings to enter the settings page. Figure 8-3 Time Settings Tap Save to save the settings. Time Zone Select the time zone where the device is located from the drop-down list. Time Sync. Mode Manual NTP 8.4.3 Set DST By default, the device time should be synchronized manually. You can set the device time manually. Set the NTP server's IP address, port No., and interval. Steps 1. Tap Configuration System System Settings DST , to enter the settings page. 53 DS-K1T320 Series Face Recogintion Terminal User Manual 2. Tap Enable DST. 3. Set the start time, end time, and DST bias. 4. Tap Save. Figure 8-4 DST 54 DS-K1T320 Series Face Recogintion Terminal User Manual 8.4.4 View Open Source Software License Tap Configuration System System Settings About , and tap View Licenses to view the device license. 8.4.5 User Management Steps 1. Tap Configuration System User Management admin Modify Password to enter the setting page. 2. Enter the old password and create a new password. 3. Confirm the new password. 4. Tap OK. Note The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using 8-16 characters, including at least two kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product. 8.4.6 Upgrade and Maintenance Reboot device, restore device parameters, upgrade device version and unlink the app. Reboot Device Tap Configuration System Maintenance . Tap Reboot to reboot the device. Upgrade Tap Configuration System Maintenance . If the device has been connected to Hik-Connect and network, when there is a new installation package in Hik-Connect, you can tap Upgrade after Online Update to upgrade the device system. Note Do not power off during the upgrading. Restore Parameters Tap Configuration System Maintenance . Default 55 DS-K1T320 Series Face Recogintion Terminal User Manual The device will restore to the default settings, except for the device IP address and the user information. Restore All All parameters will be restored to the factory settings. You should activate the device before usage. Unlink Tap Configuration System Maintenance . Tap Unlink to unlink the app. After unlinking APP account, you cannot operate via APP. 8.4.7 Security Settings You can set the SSH and HTTP according to actual needs. Tap Configuration System Security , to enter the settings page. Check Enable to enable SSH. Check Enable to enable HTTP. 8.4.8 Network Settings You can set the port and Wi-Fi parameters. Set Wi-Fi Parameters Set the Wi-Fi parameters for device wireless connection. Steps Note The function should be supported by the device. 1. Tap Configuration Network Basic Settings Wi-Fi to enter the settings page. 2. Check Enable Wi-Fi. 56 DS-K1T320 Series Face Recogintion Terminal User Manual 3. Add Wi-Fi. Figure 8-5 Wi-Fi 57 DS-K1T320 Series Face Recogintion Terminal User Manual 1) Tap +. 2) Enter Wi-Fi Name and Wi-Fi Password, and select Working Mode and Encryption Type. 3) Tap Save. Figure 8-6 Add Wi-Fi 4. Select the Wi-Fi name, and tap Connect. 5. Enter the password and tap Save. 6. Set WLAN parameters. 58 DS-K1T320 Series Face Recogintion Terminal User Manual 1) Set the IP address, subnet mask, and gateway. Or enable DHCP and the system will allocate the IP address, subnet mask, and gateway automatically. 2) Set the DNS parameters. You can enable Auto Obtain DNS, set the preferred DNS server and the alternate DNS server. 3) Tap Save. Set Port Parameters You can set the HTTP, RTSP, HTTPS, and Server according to actual needs when accessing the device via network. Tap Configuration Network Basic Settings Port , to enter the setting page. HTTP It refers to the port through which the browser accesses the device. For example, when the HTTP Port is modified to 81, you need to enter http://192.0.0.65:81 in the browser for login. RTSP It refers to the port of real-time streaming protocol. 59 DS-K1T320 Series Face Recogintion Terminal User Manual Set the HTTPS for accessing the browser. Certificate is required when accessing. It refers to the port through which the client adds the device. HTTPS Server Platform Access Platform access provides you an option to manage the devices via platform. Steps 1. Tap Configuration Network Advanced Hik-Connect to enter the settings page. Note Note Hik-Connect is an application for mobile devices. With the App, you can view live image of the device, receive alarm notification and so on. 2. Check Enable to enable the function. 3. Enter the server address and stream encryption. 6 to 12 letters (a to z, A to Z) or numbers (0 to 9), case sensitive. You are recommended to use a combination of no less than 8 letters or numbers. 4. You can view Register Status and Device QR Code. 5. Tap Save to enable the settings. Set ISUP Parameters Set the ISUP parameters for accessing device via ISUP protocol. Steps Note The function should be supported by the device. 1. Tap Configuration Network Advanced ISUP . 2. Check Enable. 3. Set the ISUP version, IP Address, Port, and Account. If you select 5.0 as the version, you should set the encryption key as well. Note 4. Set the Center Group. Center Group Select a center group from the drop-down list. 60 DS-K1T320 Series Face Recogintion Terminal User Manual Main Channel/Backup Channel The device will communicate with the center via the main channel. When exception occurs in the main channel, the device and the center will communicate with each other via the backup channel. 5. Tap Save to save the settings. HTTP Listening You can set the HTTP listening parameters. Steps 1. Tap Configuration Network Advanced HTTP Listening . 2. Edit the destination IP or domain name, URL and port. 3. Optional: Tap Default to reset the destination IP or demain name. 4. Tap Save. 8.4.9 General Settings Set Authentication Parameters Set Authentication Parameters. Steps 1. Tap Configuration General Settings Authentication Settings . 61 DS-K1T320 Series Face Recogintion Terminal User Manual Figure 8-7 Authentication Settings 2. Tap Save. Device Type Main Card Reader 62 DS-K1T320 Series Face Recogintion Terminal User Manual You can configure the device card reader's parameters. If you select main card reader, you need to configure the following parameters: Card Reader Type, Card Reader Description, Enable Card Reader, Authentication, Recognition Interval (s), Minimum Card Swiping Interval (s), Max. Authentication Failed Attempts Alarm/Alarm of Max. Failed Attempts, Enable Tampering Detection and Enable Card No. Reversing. Card Reader Type Get card reader type. Card Reader Description Get card reader description. It is read-only. Enable Card Reader Enable the card reader's function. Authentication Recognition Interval Select an authentication mode according to your actual needs from the drop-down list. If the interval between card presenting of the same card is less than the configured value, the card presenting is invalid. The interval time range is from 0 to 255 seconds (When set to 0, it means that recognition interval is not enabled, and the same authentication can be used for unlimited times). Authentication Interval You can set the authentication interval of the same person when authenticating. The same person can only authenticate once in the configured interval. A second authentication will be failed. Max. Authentication Failed Attempts Alarm/Alarm of Max. Failed Attempts Enable to report alarm when the card reading attempts reach the set value. Enable Tampering Detection Enable the anti-tamper detection for the card reader. Enable Card No. Reversing The read card No. will be in reverse sequence after enabling the function. Set Privacy Parameters Set the event storage type, picture upload and storage parameters, and the picture clearing parameters. Tap Configuration General Settings Privacy . 63 DS-K1T320 Series Face Recogintion Terminal User Manual 64 Figure 8-8 Privacy Settings DS-K1T320 Series Face Recogintion Terminal User Manual Event Storage Settings Select a method to delete the event. You can select from Delete Old Events Periodically, Delete Old Events by Specified Time, or Overwriting. Delete Old Events Periodically Enter number to set the period for event deleting. All events will be deleted according to the configured time duration. Delete Old Events by Specified Time Set a time and all events will be deleted on the configured time. Overwriting The earliest 5% events will be deleted when the system detects the stored events has been over 95% of the full space. Authentication Settings Display Authentication Result Check Face Picture, Name, or Employee ID. When authentication is completed, the system will display the selected contents in the result. Name De-identification ID De-identification The name information is desensitized with an asterisk. The ID information is desensitized with an asterisk. Picture Uploading and Storage You can upload and store pictures. Upload Captured Picture When Authenticating Upload the pictures captured when authenticating to the platform automatically. Save Captured Picture When Authenticating If you enable this function, you can save the picture when authenticating to the device. Save Registered Picture Upload Picture After Linked Capture Save Pictures After Linked Capture The registered face picture will be saved to the system if you enable the function. Upload the pictures captured by linked camera to the platform automatically. If you enable this function, you can save the picture captured by linked camera to the device. Clear All Pictures in Device You can clear registered face pictures and captured pictures in device. 65 DS-K1T320 Series Face Recogintion Terminal User Manual Clear Registered Face Pictures Clear Authentication/Captured Picture Select Face Picture, and tap Clear. All registered pictures in the device will be deleted. Select Authentication/Captured Picture, and tap Clear. All authentication/captured pictures in the device will be deleted. Set Card Security Tap Configuration General Settings Card Security to enter the settings page. Set the parameters and tap Save. Enable NFC Card Figure 8-9 Card Security In order to prevent the mobile phone from getting the data of the access control, you can enable NFC card to increase the security level of the data. Enable M1 Card M1 Card Encryption Enable M1 card and authenticating by presenting M1 card is available. M1 card encryption can improve the security level of authentication. 66 DS-K1T320 Series Face Recogintion Terminal User Manual Sector Enable CPU Card Enable the function and set the encryption sector. By default, Sector 13 is encrypted. It is recommended to encrypt sector 13. The device can read the data from CPU card when enabling the CPU card function. Set Card Authentication Parameters Set the card reading content when authenticate via card on the device. Tap Configuration General Settings Card Authentication Settings . Figure 8-10 Card Authentication Page Select a card authentication mode and tap Save. Full Card No. All card No. will be read. Wiegand 26 (3 bytes) Wiegand 34 (4 bytes) The device will read card via Wiegand 26 protocol (read 3 bytes). The device will read card via Wiegand 34 protocol (read 4 bytes). 8.4.10 Face Parameters Settings Set face parameters. Face Parameters Settings Tap Configuration Smart Intelligent Parameter . 67 DS-K1T320 Series Face Recogintion Terminal User Manual Figure 8-11 Face Parameters 68 DS-K1T320 Series Face Recogintion Terminal User Manual The functions vary according to different models. Refers to the actual device for details. Enable or disable the live face detection function. If enabling the function, the device can recognize whether the person is a live one or not. Live Face Detection Security Level After enabling the face anti-spoofing function, you can set the matching security level when performing live face authentication. Select the distance between the authenticating user and the device camera. Select Indoor or Others according to actual environment. In the outdoor scene, indoor scene near the window, or bad environment, you can choose Others. If the device is not activated by other tools, the device uses indoor as the environment mode by default. The device uses a camera to perform face recognition. The device uses a camera to perform face recognition. Continuous Face Recognition Interval (s) Set the time interval between two continuous face recognitions when authenticating. Note Set Face Parameters. Face Anti-spoofing Recognition Distance Application Mode Note Face Recognition Mode Normal Mode Note Value Range: 1 to 10. 1:1 Matching Threshold 1:N Matching Threshold Set the matching threshold when authenticating via 1:1 matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. Set the matching threshold when authenticating via 1:N matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. The maximum value is 100. Face Recognition Timeout Value (s) 69 DS-K1T320 Series Face Recogintion Terminal User Manual Configure the timeout period for face recognition. If the face recognition time exceeds the configured value, the device will prompt the face recognition timeout. Face with Mask Detection After enabling the face with mask detection, the system will recognize the captured face with mask picture. You can set face with mask1:N matching threshold, its ECO mode, and the strategy. None If the person do not wear a face mask when authenticating, the device will not prompt a notification. Reminder of Wearing Must Wear If the person do not wear a face mask when authenticating, the device prompts a notification and the door will open. If the person do not wear a face mask when authenticating, the device prompts a notification and the door keeps closed. Face with Mask & Face (1:1) Set the matching value when authenticating with face mask via 1:1 matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. Face with Mask 1:N Matching Threshold Set the matching threshold when authenticating with face mask via 1:N matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. Fingerprint Security Level You can set the security level of fingerprint. The higher the sucurity level you set, the lower the False Acceptance Rate (FAR) will be. The higher the security level you set, the lower the False Rejection Rate (FRR) will be. Set Recognition Area Tap Configuration Smart Area Configuration to enter the page. Drag the blue frame in the live video to adjust the recognition area. Only the face within the area can be recognized by the system. Drag the slider to configure the effective area of face recognition. Tap Save to save the settings. 8.4.11 Access Control Settings Set Door Parameters Tap Configuration Access Control Door Parameters . 70 DS-K1T320 Series Face Recogintion Terminal User Manual Figure 8-12 Door Parameters Settings Page Tap Save to save the settings after the configuration. Door No. Select the device corresponded door No. Name Open Duration You can create a name for the door. 71 DS-K1T320 Series Face Recogintion Terminal User Manual Set the door unlocking duration. If the door is not opened for the set time, the door will be locked. Door Open Timeout Alarm Door Contact Exit Button Type An alarm will be triggered if the door has not been closed within the configured time duration. You can set the door contact as Remain Open or Remain Closed according to your actual needs. By default, it is Remain Closed. You can set the exit button as Remain Open or Remain Closed according to your actual needs. By default, it is Remain Open. Door Lock Powering Off Status Extended Open Duration You can set the door lock status when the door lock is powering off. By default, it is Remain Closed. The door contact can be enabled with appropriate delay after person with extended access needs swipes her/his card. Door Remain Open Duration with First Person Set the door open duration when first person is in. After the first person is authorized, it allows multiple persons access the door or other authentication actions. The door can open by inputting the duress code when there is duress. At the same time, the client can report the duress event. The specific person can open the door by inputting the super password. Duress Code Super Password Note The duress code and the super code should be different. And the digit ranges from 4 to 8. 8.5 Door Operation You can operate the door remotely via mobile web. Tap Door Operation to enter the operation page. Tap Tap Tap Tap to open the door. to close the door. to set the door to remain open. to set the door to remain closed. 72 DS-K1T320 Series Face Recogintion Terminal User Manual Chapter 9 Select Language You can select a language for the device system. After the device activation, you can select a language for the device system from the drop-down list. By default, the system language is English. Note After you change the system language, the device will reboot automatically. Click Next to complete the settings. 73 DS-K1T320 Series Face Recogintion Terminal User Manual Chapter 10 Time Settings Set Time and DST Click Wizzard Time Settings . Time Zone Select the device located time zone from the drop-down list. Time Sync. NTP Manual You should set the NTP server's IP address, port No., and interval. By default, the device time should be synchronized manually. You can set the device time manually or check Sync. with Computer Time to synchronize the device time with the computer's time. Server Address Type/Server Address/NTP Port/Interval You can set the server address type, server address, NTP port, and interval. DST Settings Check DST to enable DST settings. Set the DST start time, end time and bias time. Click Next to complete the settings. 74 DS-K1T320 Series Face Recogintion Terminal User Manual Chapter 11 Environment Settings After activating the device, you should select an application mode for better device application. Steps 1. Click Wizard Environment Settings. 2. Select Indoor or Other. Note If you install the device indoors near the window or the face recognition function is not working well, select Others. If you do not configure the application mode and tap Next, the system will select Indoor by default. If you activate the device via other tools remotely, the system will select Indoor as the application mode by default. Click Next to complete the settings. 75 DS-K1T320 Series Face Recogintion Terminal User Manual Chapter 12 Privacy Settings Set the picture uploading and storage parameters. Go to Wizard Privacy Settings . Picture Uploading and Storage Save Picture When Authenticating Save picture when authenticating automatically. Upload Picture When Authenticating Upload the pictures when authenticating to the platform automatically. The registered face picture will be saved to the system if you enable the function. Upload the pictures captured by linked camera to the platform automatically. Save Registered Picture Upload Picture After Linked Capture Save Pictures After Linked Capture Click Next to complete the settings. If you enable this function, you can save the picture captured by linked camera to the device. 76 DS-K1T320 Series Face Recogintion Terminal User Manual Chapter 13 Administrator Settings Steps 1. Click Wizard Administrator Settings . 2. Enter the employee ID and name of the administrator. 3. Select a credential to add. Note You should select at least one credential. 1) Click Add Face to upload a face picture from local storage. The uploaded picture should be within 200 K, in JPGJPEGPNG format. 2) Click Add Card to enter the Card No. and select the property of the card. Note Note Note Up to 5 cards can be supported. 3) Click Add Fingerprint to add fingerprints. Up to 10 fingerprints are allowed. Click Next to complete the settings. 77 DS-K1T320 Series Face Recogintion Terminal User Manual Chapter 14 Operation via Web Browser 14.1 Login Note You can login via the web browser or the remote configuration of the client software. Make sure the device is activated. For detailed information about activation, see Activation . Login via Web Browser Enter the device IP address in the address bar of the web browser and press Enter to enter the login page. Enter the device user name and the password. Click Login. Login via Remote Configuration of Client Software Download and open the client software. After adding the device, click page. to enter the Configuration If you forget the password when logging in, you can change the password by email address or security questions. 14.2 Forget Password On the login page, click Forget Password. Select Verification Mode. Security Question Verification Answer the security questions. E-mail Verification 1. Export the QR code and send it to pw_recovery@hikvision.com as attachment. 2. You will receive a verification code within 5 minutes in your reserved email. 3. Enter the verification code into the verification code field to verify your identification. Click Next, create a new password and confirm it. 14.3 Live View You can view the live video of the device, real-time event, person information, network status, basic information, and device capacity. 78 DS-K1T320 Series Face Recogintion Terminal User Manual Figure 14-1 Live View Page Function Descriptions:

Door Status Click to view the device live view. Set the volume when starting live view. Note If you adjust the volume when starting two-way audio, you may hear a repeated sounds. You can capture image when starting live view. Select the streaming type when starting live view. You can select from the main stream and the sub stream. Full screen view.

Controlled Status Real-Time Event The door status is open/closed/remaining open/remaining closed. You can select open/closed/remaining open/remaining closed status according to your actual needs. 79 DS-K1T320 Series Face Recogintion Terminal User Manual You can view the event Employee ID, Name, Card No., Event Type, Time, and Operation. You can also click View More to enter the search conditions, including the event type, employee ID, the name, the card No., the start time, and the end time, and click Search. The results will be displayed on the right panel. You can view the added and not added information of person face, card, and fingerprint. You can view the connected and registered status of wired network, wireless network, ISUP and cloud service. Person Information Network Status Basic Information Device Capacity View More You can view the model, serial No. and firmware version. You can view the face, card, and fingerprint capacity. You can click View More to view the device name, device No., language, model, serial No., version, number of channels, IO input, IO output, lock, alarm input, alarm output, and device capacity, etc. 14.4 Person Management Click Add to add the person's information, including the basic information, certificate, authentication and settings. Add Basic Information Click Person Management Add to enter the Add Person page. Add the person's basic information, including the employee ID, the person's name, the gender, and person type. If you select Visitor as the person type, you can set the visit times. Click Save to save the settings. Set Permission Time Click Person Management Add to enter the Add Person page. Enable Long-Term Effective User, or set Start Time and End Time and the person can only has the permission within the configured time period according to your actual needs. Click Save to save the settings. Set Room No. Click Person Management Add to enter the Add Person page. Click Add to add the Floor No. and Room No.. Click to delete it. 80 DS-K1T320 Series Face Recogintion Terminal User Manual Click Save to save the settings. Authentication Settings Click Person Management Add to enter the Add Person page. Set the authentication type. Click Save to save the settings. Add Card Click Person Management Add to enter the Add Person page. Click Add Card, enter the Card No. and select the Property, and click Save to add the card. Click Save to save the settings. Add Fingerprint Note Only devices supporting the fingerprint function can add the fingerprint. Click Person Management Add to enter the Add Person page. Click Add Fingerprint, and press your finger on the fingerprint module of the device to add your fingerprint. Click Save to save the settings. Add Face Picture Click Person Management Add to enter the Add Person page. Click + on the right to upload a face picture from the local PC. The picture format should be JPG or JPEG or PNG, and the size should be less than 200 K. Note Click Save to save the settings. 14.5 Search Event Click Event Search to enter the Search page. 81 DS-K1T320 Series Face Recogintion Terminal User Manual Figure 14-2 Search Event Enter the search conditions, including the event type, the employee ID, the name, the card No., the start time, and the end time, and click Search. The results will be displayed on the right panel. 14.6 Configuration 14.6.1 Set Local Parameters Set the live view parameters, picture and clip settings. Set Live View Parameters Click Configuration Local to enter the Local page. Configure the stream type, the play performance and click Save. Picture and Clip Settings Click Configuration Local to enter the Local page. Select image format, saving path and click Save. You can also click Open to open the file folder to view details. 14.6.2 View Device Information View the device name, device No., language, model, serial No., version, number of channels, IO input, IO output, lock, alarm input, alarm output, and device capacity, etc. Click Configuration System System Settings Basic Information to enter the configuration page. You can view the device name, device No., language, model, serial No., version, number of channels, IO input, IO output, lock, alarm input, alarm output, and device capacity, etc. 82 DS-K1T320 Series Face Recogintion Terminal User Manual 14.6.3 Set Time Set the device's time zone, synchronization mode, server address, NTP port, and interval. Click Configuration System System Settings Time Settings . Figure 14-3 Time Settings Click Save to save the settings after the configuration. Time Zone Select the device located time zone from the drop-down list. Time Sync. NTP Manual You should set the NTP server's IP address, port No., and interval. By default, the device time should be synchronized manually. You can set the device time manually or check Sync. with Computer Time to synchronize the device time with the computer's time. Server Address Type/Server Address/NTP Port/Interval You can set the server address type, server address, NTP port, and interval. 14.6.4 Set DST Steps 1. Click Configuration System System Settings Time Settings . 83 DS-K1T320 Series Face Recogintion Terminal User Manual Figure 14-4 DST Page 2. Enable DST. 3. Set the DST start time, end time and bias time. 4. Click Save to save the settings. 14.6.5 Change Administrator's Password

. Steps 1. Click Configuration User Management . 2. Click 3. Enter the old password and create a new password. 4. Confirm the new password. 5. Click OK. Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product. Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user. 14.6.6 View Device Arming/Disarming Information View device arming type and arming IP address. Go to Configuration Arming/Disarming Information . You can view the device arming/disarming information. Click Refresh to refresh the page. 84 DS-K1T320 Series Face Recogintion Terminal User Manual 14.6.7 Network Settings Set TCP/IP, port, Wi-Fi parameters, ISUP, and platform access. Note Some device models do not support Wi-Fi or mobile data settings. Refer to the actual products when configuration. Set Basic Network Parameters Click Configuration Network Network Settings TCP/IP . Figure 14-5 TCP/IP Settings Page Set the parameters and click Save to save the settings. NIC Type Select a NIC type from the drop-down list. By default, it is Auto. DHCP DNS Server If uncheck the function, you should set the IPv4 address, IPv4 subnet mask, IPv4 default gateway, Mac address, and MTU. If you check the function, the system will allocate the IPv4 address, IPv4 subnet mask, the IPv4 default gateway automatically. Set the preferred DNS server and the Alternate DNS server according to your actual need. 85 DS-K1T320 Series Face Recogintion Terminal User Manual Set Wi-Fi Parameters Set the Wi-Fi parameters for device wireless connection. Steps Note The function should be supported by the device. 1. Click Configuration Network Network Settings Wi-Fi . 2. Check Wi-Fi. 3. Select a Wi-Fi Figure 14-6 Wi-Fi Settings Page

- Click

- Click Add and enter a Wi-Fi's name, password, and encryption type. Click Connect. When the of a Wi-Fi in the list and enter the Wi-Fi password. Wi-Fi is connected, click OK. 4. Optional: Set the WLAN parameters. 1) Set the IP address, subnet mask, and default gateway. Or enable DHCP and the system will allocate the IP address, subnet mask, and default gateway automatically. 5. Click Save. Set Port Parameters Set the HTTP, HTTPS, HTTP Listening, RTSP and Server port parameters. Click Configuration Network Network Service HTTP(S) . 86 DS-K1T320 Series Face Recogintion Terminal User Manual It refers to the port through which the browser accesses the device. For example, when the HTTP Port is modified to 81, you need to enter http://192.0.0.65:81 in the browser for login. Set the HTTPS for accessing the browser. Certificate is required when accessing. The device can send alarm information to the event alarm IP address or domain name via HTTP protocol/HTTPS protocol. Edit the event alarm IP address or domain name, URL, port, and protocol. HTTP HTTPS HTTP Listening Note The event alarm IP address or domain name should support the HTTP protocol/HTTPS protocol to receive the alarm information. Click Configuration Network Network Service RTSP . RTSP It refers to the port of real-time streaming protocol. Click Configuration Network Device Access SDK Server . SDK Server It refers to the port through which the client adds the device. Platform Access Platform access provides you an option to manage the devices via platform. Steps 1. Click Configuration Network Device Access Hik-Connect to enter the settings page. Hik-Connect is an application for mobile devices. With the App, you can view live image of the device, receive alarm notification and so on. 2. Check Enable to enable the function. 3. Optional: Check the checkbox of Custom, and you can set the server address by yourself. 4. Enter the server IP address, and verification code. Note Note 6 to 12 letters (a to z, A to Z) or numbers (0 to 9), case sensitive. You are recommended to use a combination of no less than 8 letters or numbers. 5. Click Save to enable the settings. 87 DS-K1T320 Series Face Recogintion Terminal User Manual Set ISUP Parameters Set the ISUP parameters for accessing device via ISUP protocol. Steps Note Note The function should be supported by the device. 1. Click Configuration Network Device Access ISUP . 2. Check Enable. 3. Set the ISUP version, server address, device ID, and the ISUP status. If you select 5.0 as the version, you should set the encryption key as well. 4. Set the ISUP listening parameters, including ISUP alarm center IP address/domain name, ISUP alarm center URL, and ISUP alarm center port. 5. Click Save. 14.6.8 Set Video and Audio Parameters Set the image quality and resolution. Set Video Parameters Click Configuration Video/Audio Video . Figure 14-7 Video Settings Page 88 DS-K1T320 Series Face Recogintion Terminal User Manual Set the stream type, the video type, the bitrate type, the frame rate, the Max. bitrate, the video encoding, and I Frame Interval. Click Save to save the settings after the configuration. Note The functions vary according to different models. Refers to the actual device for details. 14.6.9 Set Image Parameters You can adjust the image parameters, video parameters, supplement parameters and capture interval. Steps 1. Click Configuration Image . 2. Configure the parameters to adjust the image. Video Adjust(Video Standard) Set the video frame rate when performing live view remotely. After changing the standard, you should reboot the device to take effect. PAL 25 frames per second. Suitable for mainland China, Hong Kong (China), the Middle East countries, Europe countries, etc. NTSC Image Adjustment 30 frames per second. Suitable for the USA, Canada, Japan, Taiwan (China), Korea, the Philippines, etc. Drag the block or enter the value to adjust the live video's brightness, contrast, saturation, and sharpness. Supplement Light Parameters Set the supplement light type, mode, start time and end time. You can also set the brightness. Capture Interval You can select the capture interval according to your actual needs. 3. Click Default to restore the parameters to the default settings. 14.6.10 Access Control Settings Set Authentication Parameters Click Configuration Access Control Authentication Settings . 89 DS-K1T320 Series Face Recogintion Terminal User Manual Note The functions vary according to different models. Refers to the actual device for details. Figure 14-8 Set Authentication Parameters Click Save to save the settings after the configuration. Terminal/Terminal Type/Terminal Model Get terminal description. They are read-only. Enable Authentication Device Enable the authentication function. Authentication Continuous Face Recognition Interval Select an authentication mode according to your actual needs from the drop-down list. You can set the interval between 2 continuous recognition of a same person during the authentication. In the configured interval, Person A can only recognized once. If another person

(Person B) has recognized during the interval, Person A can recognized again. Authentication Interval You can set the authentication interval of the same person when authenticating. The same person can only authenticate once in the configured interval. A second authentication will be failed. Alarm of Max. Failed Attempts Max. Authentication Failed Attempts Enable to report alarm when the card reading attempts reach the set value. Enable to report alarm when the card reading attempts reach the set value. 90 DS-K1T320 Series Face Recogintion Terminal User Manual Tampering Detection Card No. Reversing Enable the anti-tamper detection for the card reader. The read card No. will be in reverse sequence after enabling the function. Set Door Parameters Click Configuration Access Control Door Parameters . Figure 14-9 Door Parameters Settings Page Click Save to save the settings after the configuration. Door No. Select the device corresponded door No. Name Open Duration You can create a name for the door. Set the door unlocking duration. If the door is not opened for the set time, the door will be locked. Door Open Timeout Alarm Door Contact An alarm will be triggered if the door has not been closed within the configured time duration. You can set the door contact as Remain Open or Remain Closed according to your actual needs. By default, it is Remain Closed. 91 DS-K1T320 Series Face Recogintion Terminal User Manual Exit Button Type Door Lock Powering Off Status Extended Open Duration You can set the exit button as Remain Open or Remain Closed according to your actual needs. By default, it is Remain Open. You can set the door lock status when the door lock is powering off. By default, it is Remain Closed. The door contact can be enabled with appropriate delay after person with extended access needs swipes her/his card. Door Remain Open Duration with First Person Set the door open duration when first person is in. After the first person is authorized, it allows multiple persons access the door or other authentication actions. The door can open by inputting the duress code when there is duress. At the same time, the client can report the duress event. The specific person can open the door by inputting the super password. Duress Code Super Password Note The duress code and the super code should be different. Set Terminal Parameters You can set terminal parameters for accessing. Click Configuration Access Control Terminal Parameters . You can set Working Mode as Access Control Mode. The access control mode is the device normal mode. You should authenticate your credential for accessing. Click Save to save the settings after the configuration. 14.6.11 Card Settings Set Card Security Click Configuration Card Settings Card Type to enter the settings page. Set the parameters and click Save. Enable NFC Card 92 DS-K1T320 Series Face Recogintion Terminal User Manual In order to prevent the mobile phone from getting the data of the access control, you can enable NFC card to increase the security level of the data. Enable M1 card and authenticating by presenting M1 card is available. M1 card encryption can improve the security level of authentication. Enable the function and set the encryption sector. By default, Sector 13 is encrypted. It is recommended to encrypt sector 13. Enable M1 Card M1 Card Encryption Sector Enable CPU Card Enable CPU card and authenticating by presenting CPU card is available. Set Card No. Authentication Parameters Set the card reading content when authenticate via card on the device. Go to Configuration Card Settings Card No. Authentication Settings . Select a card authentication mode and click Save. Full Card No. All card No. will be read. Wiegand 26 (3 bytes) Wiegand 34 (4 bytes) The device will read card via Wiegand 26 protocol (read 3 bytes). The device will read card via Wiegand 34 protocol (read 4 bytes). 14.6.12 Set Privacy Parameters Set the event storage type, picture upload and storage parameters, and the picture clearing parameters. Go to Configuration Security Privacy Settings Event Storage Settings Select a method to delete the event. You can select from Delete Old Events Periodically, Delete Old Events by Specified Time, or Overwriting. Delete Old Events Periodically Drag the block or enter number to set the period for event deleting. All events will be deleted according to the configured time duration. Delete Old Events by Specified Time 93 DS-K1T320 Series Face Recogintion Terminal User Manual Set a time and all events will be deleted on the configured time. Overwriting The earliest 5% events will be deleted when the system detects the stored events has been over 95% of the full space. Authentication Settings Display Authentication Result Name De-identification You can check Face Picture, Name, and Employee ID, to display the authentication result. You can check Name De-identification, and the whole name will not be displayed. Picture Uploading and Storage Save Picture When Authenticating Save picture when authenticating automatically. Upload Picture When Authenticating Upload the pictures when authenticating to the platform automatically. The registered face picture will be saved to the system if you enable the function. Upload the pictures captured by linked camera to the platform automatically. Save Registered Picture Upload Picture After Linked Capture Save Pictures After Linked Capture Clear All Pictures in Device If you enable this function, you can save the picture captured by linked camera to the device. Note All pictures cannot be restored once they are deleted. Clear Registered Face Pictures All registered pictures in the device will be deleted. Clear Captured Pictures All captured pictures in the device will be deleted. 14.6.13 Time and Attendance Settings If you want to track and monitor when the persons start/stop work and monitor their working hours and late arrivals, early departures, time taken on breaks, and absenteeism, you can add the person to the shift group and assign a shift schedule (a rule for the attendance defining how the 94 Result Time Settings Note name. DS-K1T320 Series Face Recogintion Terminal User Manual schedule repeats, the shift type, break settings, and the card swiping rule.) to the shift group to define the attendance parameters for the persons in the shift group. Disable Attendance Mode via Web Disable the attendance mode and the system will not display the attendance status on the initial page. Steps 1. Click Configuration T&A Status to enter the settings page. 2. Set the Time and Attendance. You will not view or configure the attendance status on the initial page. And the system will follow the attendance rule that configured on the platform. Steps 1. Click Configuration T&A Status to enter the settings page. 2. Select Schedule Template. 3. Drag mouse to set the schedule. Set the schedule from Monday to Sunday according to the actual needs. 4. You can enable On/off Work,Break Overtime according to your actual needs and set the custom 5. Optional: Select a timeline and click Delete. Or click Delete All to clear the settings. 6. Click Save. Set Manual Attendance via Web Set the attendance mode as manual, and you should select a status manually when you take attendance. Before You Start Add at least one user, and set the user's authentication mode. For details, see User Management. Steps 1. Click Configuration T&A Status to enter the settings page. 2. Set the Attendance Mode as Manual. 3. Enable the Attendance Status Required and set the attendance status lasts duration. 4. Enable a group of attendance status. 95 DS-K1T320 Series Face Recogintion Terminal User Manual The Attendance Property will not be changed. 5. Optional: Select an status and change its name if required. You should select an attendance status manually after authentication. Note Result Note If you do not select a status, the authentication will be failed and it will not be marked as a valid attendance. Set Auto Attendance via Web Set the attendance mode as auto, and you can set the attendance status and its available schedule. The system will automatically change the attendance status according to the configured schedule. Before You Start Add at least one user, and set the user's authentication mode. For details, see User Management. Steps 1. Click Configuration T&A Status to enter the settings page. 2. Set the Attendance Mode as Auto. 3. Enable the Attendance Status Required function. 4. Enable a group of attendance status. Note The Attendance Property will not be changed. 5. Optional: Select an status and change its name if required. 6. Set the status' schedule. Refers to Time Settings for details. Set Manual and Auto Attendance via Web Set the attendance mode as Manual and Auto, and the system will automatically change the attendance status according to the configured schedule. At the same time you can manually change the attendance status after the authentication. Before You Start Add at least one user, and set the user's authentication mode. For details, see User Management. Steps 1. Click Configuration T&A Status to enter the settings page. 2. Set the Attendance Mode as Manual and Auto. 3. Enable the Attendance Status Required function. 96 DS-K1T320 Series Face Recogintion Terminal User Manual 4. Enable a group of attendance status. The Attendance Property will not be changed. 5. Optional: Select an status and change its name if required. 6. Set the status' schedule. Refers to Time Settings for details. Note Result On the initial page and authenticate. The authentication will be marked as the configured attendance status according to the schedule. If you tap the edit icon on the result tab, you can select a status to take attendance manually, the authentication will be marked as the edited attendance status. Example If set the Break Out as Monday 11:00, and Break In as Monday 12:00, the valid user's authentication from Monday 11:00 to 12:00 will be marked as break. 14.6.14 Set Biometric Parameters Set Basic Parameters Click Configuration Smart Smart . Note The functions vary according to different models. Refers to the actual device for details. 97 DS-K1T320 Series Face Recogintion Terminal User Manual Figure 14-10 Smart Settings Page Click Save to save the settings after the configuration. Face Anti-spoofing Enable or disable the live face detection function. If enabling the function, the device can recognize whether the person is a live one or not. Note Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher security level, use multiple authentication modes. Live Face Detection Security Level After enabling the face anti-spoofing function, you can set the matching security level when performing live face authentication. Recognition Distance Application Mode Select the distance between the authenticating user and the device camera. 98 DS-K1T320 Series Face Recogintion Terminal User Manual Select either others or indoor according to actual environment. Face Recognition Mode Normal Mode Recognize face via the camera normally. Pitch Angle Yaw Angle The maximum pitch angle when starting face authentication. The maximum yaw angle when starting face authentication. 1:1 Matching Threshold Set the matching threshold when authenticating via 1:1 matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. Set the matching threshold when authenticating via 1:N matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. Set the timeout value when face recognizing. If the face recognition time is longer than the configured value, the system will pop up a prompt. 1:N Matching Threshold Face Recognition Timeout Value Face without Mask Detection After enabling the face without mask detection, the system will recognize the captured face with mask picture or not. You can set face with mask1:N matching threshold, it's ECO mode, and the strategy. None The function is disabled. The device will not detect whether a person is wearing a face mask or not. Reminder of Wearing Face Mask If the person do not wear the face mask when authenticating, the device will pop up a prompt and the door will open. Must Wear Face Mask Face with Mask & Face (1:1) If the person do not wear the face mask when authenticating, the device will pop up a prompt and the door will keep closed. Set the matching value when authenticating with face mask via 1:1 matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. Face with Mask 1:N Matching Threshold Set the matching threshold when authenticating with face mask via 1:N matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. 99 DS-K1T320 Series Face Recogintion Terminal User Manual Set Recognition Area Click Configuration Smart Area Configuration . Drag the yellow frame in the live video to adjust the recognition area. Only the face within the area can be recognized by the system. Click Save to save the settings. Click to record videos or capture pictures. or 14.6.15 Set Preference You can set the display theme and the sleep time for the device. Set Theme Click Configuration Preference . Sleep Display Mode Enable Sleep and the device will enter the sleep mode when no operation within the configured sleep time. You can select display theme for device authentication. You can select Display Mode as Default or Simple. When you select Simple, the information of name, ID, face picture will be not displayed. 14.6.16 Upgrade and Maintenance Reboot device, restore device parameters, and upgrade device version. Reboot Device Click Maintenance and Security Maintenance Restart . Click Restart to reboot the device. Upgrade Click Maintenance and Security Maintenance Upgrade . Select an upgrade type from the drop-down list. Click local PC. Click Upgrade to start upgrading. If the device has been connected to Hik-Connect and network, when there is a new installation package in Hik-Connect, you can click Upgrade after Online Update to upgrade the device system. and select the upgrade file from your Note Do not power off during the upgrading. 100 DS-K1T320 Series Face Recogintion Terminal User Manual Restore Parameters Click Maintenance and Security Maintenance Backup and Reset . Restore All All parameters will be restored to the factory settings. You should activate the device before usage. Restore The device will restore to the default settings, except for the device IP address and the user information. Import and Export Parameters Click Maintenance and Security Maintenance Backup and Reset . Export Click Export to export the device parameters. You can import the exported device parameters to another device. Note Import Click and select the file to import. Click Import to start import configuration file. 14.6.17 Device Debugging You can set device debugging parameters. Steps 1. Click Maintenance and Security Maintenance Device Debugging . 2. You can set the following parameters. To raise network security, disable SSH service. The configuration is only used to debug the device for the professionals. Enable SSH Print Log You can click Export to export log. Capture Network Packet You can set the Capture Packet Duration, Capture Packet Size, and click Start to capture. 14.6.18 Log Query You can search and view the device logs. Go to Maintenance and Security Maintenance Log . 101 DS-K1T320 Series Face Recogintion Terminal User Manual Set the major and minor type of the log type. Set the start time and end time for searching, and click Search. The results will be displayed below, which including the No., time, the major type the minor type, the channel No., the local/remote user information, the remote host IP, etc. 14.6.19 Security Mode Settings Set the security mode for logging in the client software. On the Device for Management page, click Maintenance and Security Security Security Service . Select a security mode, and click Save. Security Mode High security level for user information verification when logging in the client software. Compatible Mode The user information verification is compatible with the old client software version when logging in. 14.6.20 Certificate Management It helps to manage the server/client certificates and CA certificate. Note The function is only supported by certain device models. Create and Install Self-signed Certificate Steps 1. Go to Maintenance and Security Security Certificate Management . 2. In the Certificate Files area, select a Certificate Type from the drop-down list. 3. Click Create. 4. Input certificate information. 5. Click OK to save and install the certificate. The created certificate is displayed in the Certificate Details area. The certificate will be saved automatically. 6. Download the certificate and save it to an asking file in the local computer. 7. Send the asking file to a certification authority for signature. 8. Import the signed certificate. 1) Select a certificate type in the Import Passwords area, and select a certificate from the local, and click Install. 102 DS-K1T320 Series Face Recogintion Terminal User Manual 2) Select a certificate type in the Import Communication Certificate area, and select a certificate from the local, and click Install. Install Other Authorized Certificate If you already has an authorized certificate (not created by the device), you can import it to the device directly. Steps 1. Go to Maintenance and Security Security Certificate Management . 2. In the Import Passwords and Import Communication Certificate areas, select certificate type and upload certificate. 3. Click Install. Install CA Certificate Before You Start Prepare a CA certificate in advance. Steps 1. Go to Maintenance and Security Security Certificate Management . 2. Create an ID in the Import CA Certificate area. Note The input certificate ID cannot be the same as the existing ones. 3. Upload a certificate file from the local. 4. Click Install. 103 DS-K1T320 Series Face Recogintion Terminal User Manual Chapter 15 Client Software Configuration 15.1 Configuration Flow of Client Software Follow the flow diagram below to configure on the client software. Figure 15-1 Flow Diagram of Configuration on Client Software 15.2 Device Management The client supports managing access control devices and video intercom devices. 104 DS-K1T320 Series Face Recogintion Terminal User Manual Example You can control entrance & exit and manage attendance after adding access control devices to the client; you can perform video intercom with the indoor stations and door stations. 15.2.1 Add Device The client provides three device adding modes including by IP/domain, IP segment, and EHome protocol. The client also supports importing multiple devices in a batch when there are large amount of devices to be added. Add Device by IP Address or Domain Name If you know the IP address or domain name of the device to add, you can add devices to the client by specifying the IP address (or domain name), user name, password, etc. Steps 1. Enter Device Management module. 2. Click Device tab on the top of the right panel. The added devices are displayed on the right panel. 3. Click Add to open the Add window, and then select IP/Domain as the adding mode. 4. Enter the required information. Create a descriptive name for the device. For example, you can use a nickname that can show the location or feature of the device. The IP address or domain name of the device. The devices to add share the same port number. The default value is 8000. Enter the device user name. By default, the user name is admin. Enter the device password. Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend Name Address Port User Name Password 105 DS-K1T320 Series Face Recogintion Terminal User Manual you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product. Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user. 5. Optional: Check Transmission Encryption (TLS) to enable transmission encryption using TLS

(Transport Layer Security) protocol for security purpose. Note This function should be supported by the device. If you have enabled Certificate Verification, you should click Open Certificate Directory to open the default folder, and copy the certificate file exported from the device to this default directory to strengthen the security. See for details about enabling certificate verification. You can log into the device to get the certificate file by web browser. 6. Check Synchronize Time to synchronize the device time with the PC running the client after 7. Optional: Check Import to Group to create a group by the device name, and import all the adding the device to the client. channels of the device to this group. Example For access control device, its access points, alarm inputs/outputs, and encoding channels (if exist) will be imported to this group. 8. Finish adding the device.

- Click Add to add the device and back to the device list page.

- Click Add and New to save the settings and continue to add other device. Import Devices in a Batch You can add multiple devices to the client in a batch by entering the device parameters in a pre-

defined CSV file. Steps 1. Enter the Device Management module. 2. Click Device tab on the top of the right panel. 3. Click Add to open the Add window, and then select Batch Import as the adding mode. 4. Click Export Template and then save the pre-defined template (CSV file) on your PC. 5. Open the exported template file and enter the required information of the devices to be added For detailed description of the required fields, refer to the introductions in the template. on the corresponding column. Note Adding Mode Enter 0 or 1 or 2. 106 DS-K1T320 Series Face Recogintion Terminal User Manual Address Port User Name Password Edit the address of the device. Enter the device port number. The default port number is 8000. Enter the device user name. By default, the user name is admin. Enter the device password. Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product. Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user. Enter 1 to create a group by the device name. All the channels of the device will be imported to the corresponding group by default. Enter 0 to disable this function. Import to Group and select the template file. 6. Click 7. Click Add to import the devices. 15.2.2 Reset Device Password If you forgot the password of the detected online devices, you can reset the device password via the client. Steps 1. Enter Device Management page. 2. Click Online Device to show the online device area. All the online devices sharing the same subnet will be displayed in the list. 3. Select the device from the list and click 4. Reset the device password. on the Operation column.

- Click Generate to pop up the QR Code window and click Download to save the QR code to your PC. You can also take a photo of the QR code to save it to your phone. Send the picture to our technical support. 107 DS-K1T320 Series Face Recogintion Terminal User Manual Note Caution For the following operations for resetting the password, contact our technical support. The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product. Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user. 15.2.3 Manage Added Devices After adding devices to device list, you can manage the added devices including editing device parameters, remote configuration, viewing device status, etc. Table 15-1 Manage Added Devices Edit Device to edit device information including device name, address, user Click name, password, etc. Delete Device Check one or more devices, and click Delete to delete the selected devices. Remote Configuration to set remote configuration of the corresponding device. For Click details, refer to the user manual of device. View Device Status Click to view device status, including door No., door status, etc. Note For different devices, you will view different information about device status. View Online User to view the details of online user who access the device, Click including user name, user type, IP address and login time. Refresh Device Information Click to refresh and get the latest device information. 108 DS-K1T320 Series Face Recogintion Terminal User Manual 15.3 Group Management The client provides groups to manage the added resources in different groups. You can group the resources into different groups according to the resources' locations. Example For example, on the 1st floor, there mounted 16 doors, 64 alarm inputs, and 16 alarm outputs. You can organize these resources into one group (named 1st Floor) for convenient management. You can control door status, and do some other operations of the devices after managing the resources by groups. 15.3.1 Add Group You can add group to organize the added device for convenient management. Steps 1. Enter the Device Management module. 2. Click Device Management Group to enter the group management page. 3. Create a group.

- Click Add Group and enter a group name as you want.

- Click Create Group by Device Name and select an added device to create a new group by the name of the selected device. Note The resources (such as alarm inputs/outputs, access points, etc.) of this device will be imported to the group by default. 15.3.2 Import Resources to Group You can import the device resources (such as alarm inputs/outputs, access points, etc.) to the added group in a batch. Before You Start Add a group for managing devices. Refer to Add Group . Steps 1. Enter the Device Management module. 2. Click Device Management Group to enter the group management page. 3. Select a group from the group list and select the resource type as Access Point, Alarm Input, Alarm Output, etc. 4. Click Import. 5. Select the thumbnails/names of the resources in the thumbnail/list view. 109 DS-K1T320 Series Face Recogintion Terminal User Manual Note You can click or to switch the resource display mode to thumbnail view or to list view. 6. Click Import to import the selected resources to the group. 15.4 Person Management You can add person information to the system for further operations such as access control, video intercom, time and attendance, etc. You can manage the added persons such as issuing cards to them in a batch, importing and exporting person information in a batch, etc. 15.4.1 Add Organization You can add an organization and import person information to the organization for effective management of the persons. You can also add a surbodinate organization for the added one. Steps 1. Enter Person module. 2. Select a parent organization in the left column and click Add in the upper-left corner to add an 3. Create a name for the added organization. organization. Note Up to 10 levels of organizations can be added. 4. Optional: Perform the following operation(s). Edit Organization Hover the mouse on an added organization and click to edit its name. Hover the mouse on an added organization and click to delete it. Delete Organization Note organization. The lower-level organizations will be deleted as well if you delete an Make sure there is no person added under the organization, or the organization cannot be deleted. Show Persons in Sub Organization Check Show Persons in Sub Organization and select an organization to show persons in its sub organizations. 15.4.2 Import and Export Person Identify Information You can import the information and pictures of multiple persons to the client software in a batch. Meanwhile, you can also export the person information and pictures and save them in your PC. 110 DS-K1T320 Series Face Recogintion Terminal User Manual Import Person Information You can enter the information of multiple persons in a predefined template (CSV/Excel file) to import the information to the client in a batch. Steps 1. Enter the Person module. 2. Select an added organization in the list, or click Add in the upper-left corner to add an organization and then select it. 3. Click Import to open the Import panel. 4. Select Person Information as the importing mode. 5. Click Download Template for Importing Person to download the template. 6. Enter the person information in the downloaded template. If the person has multiple cards, separate the card No. with semicolon. Items with asterisk are required. By default, the Hire Date is the current date. 7. Click 8. Click Import to start importing. to select the CSV/Excel file with person information from local PC. Note Note If a person No. already exists in the client's database, delete the existing information before importing. You can import information of no more than 2,000 persons. Import Person Pictures After importing face pictures for the added persons to the client, the persons in the pictures can be identified by an added face recognition terminal. You can either import person pictures one by one, or import multiple pictures at a time according to your need. Before You Start Be sure to have imported person information to the client beforehand. Steps 1. Enter the Person module. 2. Select an added organization in the list, or click Add in the upper-left corner to add an organization and then select it. 3. Click Import to open the Import panel and check Face. 4. Optional: Enable Verify by Device to check whether face recognition device managed in the client can recognize the face in the photo. to select a face picture file. 5. Click 111 DS-K1T320 Series Face Recogintion Terminal User Manual The (folder of) face pictures should be in ZIP format. Each picture file should be in JPG format and should be no larger than 200 KB. Each picture file should be named as "Person ID_Name". The Person ID should be the same Note Note with that of the imported person information. 6. Click Import to start importing. The importing progress and result will be displayed. Export Person Information Before You Start Make sure you have added persons to an organization. Steps 1. Enter the Person module. 2. Optional: Select an organization in the list. You can export the added persons' information to local PC as a CSV/Excel file. All persons' information will be exported if you do not select any organization. 3. Click Export to open the Export panel. 4. Check Person Information as the content to export. 5. Check desired items to export. 6. Click Export to save the exported file in CSV/Excel file on your PC. Export Person Pictures You can export face picture file of the added persons and save in your PC. Before You Start Make sure you have added persons and their face pictures to an organization. Steps 1. Enter the Person module. 2. Optional: Select an organization in the list. Note All persons' face pictures will be exported if you do not select any organization. 3. Click Export to open the Export panel and check Face as the content to export. 4. Click Export to start exporting. 112 DS-K1T320 Series Face Recogintion Terminal User Manual Note The exported file is in ZIP format. The exported face picture is named as "Person ID_Name_0" ("0" is for a full-frontal face). 15.4.3 Get Person Information from Access Control Device If the added access control device has been configured with person information (including person details, fingerprint, and issued card information), you can get the person information from the device and import them to the client for further operations. Steps Note Note Note If the person name stored in the device is empty, the person name will be filled with the issued card No. after importing to the client. The gender of the persons will be Male by default. If the card number or person ID (employee ID) stored on the device already exists in the client database, the person with this card number or person ID will not be imported to the client. 1. Enter Person module. 2. Select an organization to import the persons. 3. Click Get from Device. 4. Select an added access control device or the enrollment station from the drop-down list. If you select the enrollment station, you should click Login, and set IP address, port No., user name and password of the device. 5. Click Import to start importing the person information to the client. Up to 2,000 persons and 5,000 cards can be imported. The person information, including person details, person's fingerprint information (if configured), and the linked cards (if configured), will be imported to the selected organization. 15.4.4 Issue Cards to Persons in Batch The client provides a convenient way to issue cards to multiple persons in a batch. Steps 1. Enter Person module. 2. Click Batch Issue Cards. All the added persons with no card issued will be displayed in the right panel. 113 DS-K1T320 Series Face Recogintion Terminal User Manual 3. Optional: Enter key words (name or person ID) in the input box to filter the person(s) that need 4. Optional: Click Settings to set the card issuing parameters. For details, refer to Issue a Card by 5. Click Initialize to initialize the card enrollment station or card reader to make it ready for issuing issuing cards. Local Mode. cards. 6. Click the Card No. column and enter the card number.

- Place the card on the card enrollment station.

- Swipe the card on the card reader.

- Manually enter the card number and press the Enter key. The person(s) in the list will be issued with card(s). 15.4.5 Report Card Loss If the person lost his/her card, you can report the card loss so that the card's related access authorization will be inactive. Steps 1. Enter Person module. 2. Select the person you want to report card loss for and click Edit to open the Edit Person window. 3. In the Credential Card panel, click on the added card to set this card as lost card. After reporting card loss, the access authorization of this card will be invalid and inactive. Other person who gets this card cannot access the doors by swiping this lost card. 4. Optional: If the lost card is found, you can click to cancel the loss. After cancelling card loss, the access authorization of the person will be valid and active. 5. If the lost card is added in one access group and the access group is applied to the device already, after reporting card loss or cancelling card loss, a window will pop up to notify you to apply the changes to the device. After applying to device, these changes can take effect on the device. 15.4.6 Set Card Issuing Parameters The client provides two modes for reading a card's number: via card enrollment station or via the card reader of the access control device. If a card enrollment station is available, connect it to the PC running the client by USB interface or COM, and place the card on the card enrollment to read the card number. If not, you can also swipe the card on the card reader of the added access control device to get the card number. As a result, before issuing a card to one person, you need to set the card issuing parameters including the issuing mode and related parameters. When adding a card to one person, click Settings to open the Card Issuing Settings window. 114 DS-K1T320 Series Face Recogintion Terminal User Manual Local Mode: Issue Card by Card Enrollment Station Connect a card enrollment station to the PC running the client. You can place the card on the card enrollment station to get the card number. Card Enrollment Station Select the model of the connected card enrollment station Currently, the supported card enrollment station models include DS-K1F100-D8, DS-K1F100-M, DS-K1F100-D8E, and DS-K1F180-D8E. Note Card Type Serial Port Buzzing Card No. Type M1 Card Encryption This field is only available when the model is DS-K1F100-D8E or DS-K1F180-D8E. Select the card type as EM card or IC card according to the actual card type. It is only available when the model is DS-K1F100-M. Select the COM the card enrollment station connects to. Enable or disable the buzzing when the card number is read successfully. Select the type of the card number according to actual needs. This field is only available when the model is DS-K1F100-D8, DS-K1F100-D8E, or DS-K1F180-D8E. If the card is M1 card, and if you need to enable the M1 Card Encryption function, you should enable this function and select the sector of the card to encrypt. Remote Mode: Issue Card by Card Reader Select an access control device added in the client and swipe the card on its card reader to read the card number. 15.5 Configure Schedule and Template You can configure the template including holiday and week schedule. After setting the template, you can adopt the configured template to access groups when setting the access groups, so that the access group will take effect in the time durations of the template. Note For access group settings, refer to Set Access Group to Assign Access Authorization to Persons . 115 DS-K1T320 Series Face Recogintion Terminal User Manual You can create holidays and set the days in the holidays, including start date, end date, and holiday duration in one day. 15.5.1 Add Holiday Steps Note You can add up to 64 holidays in the software system. 1. Click Access Control Schedule Holiday to enter the Holiday page. 2. Click Add on the left panel. 3. Create a name for the holiday. 4. Optional: Enter the descriptions or some notifications of this holiday in the Remark box. 5. Add a holiday period to the holiday list and configure the holiday duration. Up to 16 holiday periods can be added to one holiday. 1) Click Add in the Holiday List field. 2) Drag the cursor to draw the time duration, which means in that duration of time, the configured access group is activated. Note Note Up to 8 time durations can be set to one holiday period. 3) Optional: Perform the following operations to edit the time durations. Move the cursor to the time duration and drag the time duration on the timeline bar to the

. desired position when the cursor turns to Click the time duration and directly edit the start/end time in the appeared dialog. Move the cursor to the start or the end of time duration and drag to lengthen or shorten the time duration when the cursor turns to

. 4) Optional: Select the time duration(s) that need to be deleted, and then click in the Operation column to delete the selected time duration(s). in the Operation column to clear all the time duration(s) in the time bar. in the Operation column to delete this added holiday period from the 5) Optional: Click 6) Optional: Click holiday list. 6. Click Save. 15.5.2 Add Template Template includes week schedule and holiday. You can set week schedule and assign the time duration of access authorization for different person or group. You can also select the added holiday(s) for the template. 116 DS-K1T320 Series Face Recogintion Terminal User Manual Steps Note Note You can add up to 255 templates in the software system. 1. Click Access Control Schedule Template to enter the Template page. There are two default templates: All-Day Authorized and All-Day Denied, and they cannot be edited or deleted. All-Day Authorized The access authorization is valid in each day of the week and it has no holiday. All-Day Denied The access authorization is invalid in each day of the week and it has no holiday. 2. Click Add on the left panel to create a new template. 3. Create a name for the template. 4. Enter the descriptions or some notification of this template in the Remark box. 5. Edit the week schedule to apply it to the template. 1) Click Week Schedule tab on the lower panel. 2) Select a day of the week and draw time duration(s) on the timeline bar. Note Note Note Up to 8 time duration(s) can be set for each day in the week schedule. 3) Optional: Perform the following operations to edit the time durations. Move the cursor to the time duration and drag the time duration on the timeline bar to the

. desired position when the cursor turns to Click the time duration and directly edit the start/end time in the appeared dialog. Move the cursor to the start or the end of time duration and drag to lengthen or shorten the time duration when the cursor turns to

. 4) Repeat the two steps above to draw more time durations on the other days of the week. 6. Add a holiday to apply it to the template. Up to 4 holidays can be added to one template. 1) Click Holiday tab. 2) Select a holiday in the left list and it will be added to the selected list on the right panel. 3) Optional: Click Add to add a new holiday. For details about adding a holiday, refer to Add Holiday . 117 DS-K1T320 Series Face Recogintion Terminal User Manual 4) Optional: Select a selected holiday in the right list and click click Clear to clear all the selected holiday(s) in the right list. 7. Click Save to save the settings and finish adding the template. to remove the selected one, or 15.6 Set Access Group to Assign Access Authorization to Persons After adding the person and configuring the person's credentials, you can create the access groups to define which person(s) can get access to which door(s) and then apply the access group to the access control device to take effect. Before You Start Add person to the client. Add access control device to the client and group access points. For details, refer to Group Management . Add template. Steps When the access group settings are changed, you need to apply the access groups to the devices again to take effect. The access group changes include changes of template, access group settings, person's access group settings, and related person details (including card number, fingerprint, face picture, linkage between card number and fingerprint, linkage between card number and fingerprint, card password, card effective period, etc). 1. Click Access Control Authorization Access Group to enter the Access Group interface. 2. Click Add to open the Add window. 3. In the Name text field, create a name for the access group as you want. 4. Select a template for the access group. Note You should configure the template before access group settings. Refer to Configure Schedule and Template for details. 5. In the left list of the Select Person field, select person(s) to assign access authority. 6. In the left list of the Select Access Point field, select door(s), door station(s) or floor(s) for the selected persons to access. 7. Click Save. You can view the selected person(s) and the selected access point(s) on the right side of the interface. 118 DS-K1T320 Series Face Recogintion Terminal User Manual Figure 15-2 Display the Selected Person(s) and Access Point(s) 8. After adding the access groups, you need to apply them to the access control device to take effect. 1) Select the access group(s) to apply to the access control device. 2) Click Apply All to Devices start applying all the selected access group(s) to the access control 3) Click Apply All to Devices or Apply Changes to Devices. device or door station. Apply All to Devices This operation will clear all the existed access groups of the selected devices and then apply the new access group to the device. Apply Changes to Devices This operation will not clear the existed access groups of the selected devices and only apply the changed part of the selected access group(s) to the device(s). 4) View the applying status in the Status column or click Applying Status to view all the applied access group(s). Note You can check Display Failure Only to filter the applying results. The selected persons in the applied access groups will have the authorization to enter/exit the selected doors/door stations with their linked card(s) or fingerprints. 9. Optional: Click to edit the access group if necessary. 119 DS-K1T320 Series Face Recogintion Terminal User Manual Note If you change the persons' access information or other related information, you will view the promptAccess Group to Be Applied on the right corner of the client. You can click the prompt to apply the changed data to the device. You can select either Apply Now or Apply Later. Figure 15-3 Data Synchronization 15.7 Configure Advanced Functions You can configure the advanced functions of access control to meet some special requirements in different scene. Note For the card related functions(the type of access control card), only the card(s) with access group applied will be listed when adding cards. The advanced functions should be supported by the device. Hover the cursor on the Advanced Function, and then Click function(s) to be displayed. to customize the advanced 15.7.1 Configure Device Parameters After adding the access control device, you can configure the parameters of access control device, access control points. 120 DS-K1T320 Series Face Recogintion Terminal User Manual Configure Parameters for Access Control Device After adding the access control device, you can configure its parameters, including overlaying user information on picture, uploading pictures after capturing, saving captured pictures, etc. Steps 1. Click Access Control Advanced Function Device Parameter . If you can find Device Parameter in the Advanced Function list, Hover the cursor on the Advanced Function, and then Click to select the Device Parameter to be displayed. 2. Select an access device to show its parameters on the right page. 3. Turn the switch to ON to enable the corresponding functions. The displayed parameters may vary for different access control devices. Some of the following parameters are not listed in the Basic Information page, click More to Note Note edit the parameters. Voice Prompt If you enable this function, the voice prompt is enabled in the device. You can hear the voice prompt when operating in the device. Upload Pic. After Linked Capture Save Pic. After Linked Capture Upload the pictures captured by linked camera to the system automatically. If you enable this function, you can save the picture captured by linked camera to the device. Face Recognition Mode Normal Mode Recognize face via the camera normally. Deep Mode The device can recognize a much wider people range than the normal mode. This mode is applicable to a more complicated environment. Enable NFC Card Enable EM Card If enable the function, the device can recognize the NFC card. You can present NFC card on the device. Enable M1 Card If enable the function, the device can recognize the M1 card. You can present M1 card on the device. 121 DS-K1T320 Series Face Recogintion Terminal User Manual If enable the function, the device can recognize the EM card. You can present EM card on the device. Note If the peripheral card reader supports presenting EM card, the function is also supported to enable/disable the EM card function. 4. Click OK. 5. Optional: Click Copy to, and then select the access control device(s) to copy the parameters in the page to the selected device(s). Configure Parameters for Door/Elevator After adding the access control device, you can configure its access point (door or floor) parameters. Before You Start Add access control device to the client. Steps 1. Click Access Control Advanced Function Device Parameter . 2. Select an access control device on the left panel, and then click the selected device. 3. Select a door or floor to show its parameters on the right page. 4. Edit the door or floor parameters. to show the doors or floors of Note The displayed parameters may vary for different access control devices. Some of the following parameters are not listed in the Basic Information page, click More to edit the parameters. Name Door Contact Edit the card reader name as desired. You can set the door sensor as remaining closed or remaining open. Usually, it is remaining closed. You can set the exit button as remaining closed or remaining open. Usually, it is remaining open. After swiping the normal card and relay action, the timer for locking the door starts working. Exit Button Type Door Locked Time Extended Open Duration 122 DS-K1T320 Series Face Recogintion Terminal User Manual The door contact can be enabled with appropriate delay after person with extended accesss needs swipes her/his card. Door Left Open Timeout Alarm Lock Door when Door Closed The alarm can be triggered if the door has not been closed in a configured time period. If it is set as 0, no alarm will be triggered. The door can be locked once it is closed even if the Door Locked Time is not reached. The door can open by inputting the duress code when there is duress. At the same time, the client can report the duress event. The specific person can open the door by inputting the super password. Create a dismiss code which can be used to stop the buzzer of the card reader (by entering the dismiss code on the keypad). Duress Code Super Password Dismiss Code Note The duress code, super code, and dismiss code should be different. The duress code, super password, and the dismiss code should be different from the The length of duress code, super password, and the dismiss code is according the device, authentication password. usually it should contains 4 to 8 digits. 5. Click OK. 6. Optional: Click Copy to , and then select the door/floor(s) to copy the parameters in the page to the selected doors/floor(s). Note The door or floor's status duration settings will be copied to the selected door/floor(s) as well. Configure Parameters for Card Reader After adding the access control device, you can configure its card reader parameters. Before You Start Add access control device to the client. Steps 1. Click Access Control Advanced Function Device Parameter . 2. In the device list on the left, click card reader's parameters on the right. 3. Edit the card reader basic parameters in the Basic Information page. to expand the door, select a card reader and you can edit the 123 DS-K1T320 Series Face Recogintion Terminal User Manual The displayed parameters may vary for different access control devices. There are part of parameters listed as follows. Refer to the user manual of the device for more details. Some of the following parameters are not listed in the Basic Information page, click More to Note edit the parameters. Name Edit the card reader name as desired. OK LED Polarity/Error LED Polarity/Buzzer Polarity Set OK LED Polarity/Error LED Polarity/Buzzer LED Polarity of main board according to the card reader parameters. Generally, adopts the default settings. Minimum Card Swiping Interval If the interval between card swiping of the same card is less than the set value, the card swiping is invalid. You can set it as 0 to 255. Max. Interval When Entering PWD When you inputting the password on the card reader, if the interval between pressing two digits is larger than the set value, the digits you pressed before will be cleared automatically. Alarm of Max. Failed Attempts Enable to report alarm when the card reading attempts reach the set value. Max. Times of Card Failure Set the max. failure attempts of reading card. Tampering Detection Enable the anti-tamper detection for the card reader. Communicate with Controller Every When the access control device cannot connect with the card reader for longer than the set time, the card reader will turn offline automatically. Buzzing Time Set the card reader buzzing time. The available time ranges from 0 to 5,999s. 0 represents continuous buzzing. Card Reader Type/Card Reader Description Get card reader type and description. They are read-only. Fingerprint Recognition Level Select the fingerprint recognition level in the drop-down list. Default Card Reader Authentication Mode View the default card reader authentication mode. Fingerprint Capacity 124 DS-K1T320 Series Face Recogintion Terminal User Manual View the maximum number of available fingerprints. Existing Fingerprint Number View the number of existed fingerprints in the device. Score The device will score the captured picture according to the yaw angle, pitch angle, and pupillary distance. If the score is less than the configured value, face recognition will be failed. Face Recognition Timeout Value Face Recognition Interval Face 1:1 Matching Threshold If the recognition time is more than the configured time, the device will remind you. The time interval between two continuous face recognitions when authenticating. By default, it is 2s. Set the matching threshold when authenticating via 1:1 matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate when authentication. 1:N Security Level Live Face Detection Set the matching security level when authenticating via 1:N matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate when authentication. Enable or disable the live face detection function. If enabling the function, the device can recognize whether the person is a live one or not. Live Face Detection Security Level After enabling Live Face Detection function, you can set the matching security level when performing live face authentication. Max. Failed Attempts for Face Auth. Set the maximum live face detection failed attempts. The system will lock the user's face for 5 minutes if the live face detection is failed for more than the configured attempts. The same user cannot authenticate via the fake face within 5 minutes. Within the 5 minutes, the user can authenticate via the real face twice continuously to unlock. Lock Authentication Failed Face After enabling the Live Face Detection function, the system will lock the user's face for 5 minutes if the live face detection is failed for more than the configured attempts. The same user cannot authenticate via the fake face within 5 minutes. Within the 5 minutes, the user can authenticate via the real face twice continuously to unlock. Application Mode 4. Click OK. You can select indoor or others application modes according to actual environment. 125 DS-K1T320 Series Face Recogintion Terminal User Manual 5. Optional: Click Copy to, and then select the card reader(s) to copy the parameters in the page to the selected card reader(s). Configure Parameters for Alarm Output After adding the access control device, if the device links to alarm outputs, you can configure the parameters. Before You Start Add access control device to the client, and make sure the device supports alarm output. Steps 1. Click Access Control Advanced Function Device Parameter to enter access control to expand the door, select an alarm input and you can edit parameter configuration page. 2. In the device list on the left, click the alarm input's parameters on the right. 3. Set the alarm output parameters. Name Edit the card reader name as desired. Alarm Output Active Time How long the alarm output will last after triggered. 4. Click OK. 5. Optional: Set the switch on the upper right corner to ON to trigger the alarm output. 15.7.2 Configure Device Parameters After adding the access control device, you can set its parameters such as network parameters. Set Parameters for Face Recognition Terminal For face recognition terminal, you can set its parameters including face picture database, QR code authentication, etc. Steps Note This function should be supported by the device. 1. Enter the Access Control module. 2. On the navigation bar on the left, enter Advanced Function More Parameters . 3. Select an access control device in the device list and click Face Recognition Terminal. 4. Set the parameters. 126 DS-K1T320 Series Face Recogintion Terminal User Manual These parameters displayed vary according to different device models. Note COM Select a COM port for configuration. COM1 refers to the RS-485 interface and COM2 refers to the RS-232 interface. Face Picture Database Authenticate by QR Code select Deep Learning as the face picture database. If enabled, the device camera can scan the QR code to authenticate. By default, the function is disabled. Blocklist Authentication If enabled, the device will compare the person who want to access with the persons in the blocklist. If matched (the person is in the blocklist), the access will be denied and the device will upload an alarm to the client. If mismatched (the person is not in the blocklist), the access will be granted. If enabled, the captured face picture when authenticating will be saved on the device. Save Authenticating Face Picture MCU Version 5. Click Save. View the device MCU version. Set RS-485 Parameters You can set the access control device's RS-485 parameters including the baud rate, data bit, the stop bit, parity type, flow control type, communication mode, work mode, and connection mode. Steps Note page. The RS-485 Settings should be supported by the device. 1. Enter the Access Control module. 2. On the navigation bar on the left, enter Advanced Function More Parameters . 3. Select an access control device in the device list and click RS-485 to enter the RS-485 Settings 4. Select the serial port number from the drop-down list to set the RS-485 parameters. 5. Set the serial number, external device, authentication center, baud rate, data bit, stop bit, parity type, flow control type, communication mode, and working mode in the drop-down list. 127 DS-K1T320 Series Face Recogintion Terminal User Manual The configured parameters will be applied to the device automatically. When you change the working mode or connection mode, the device will reboot 6. Click Save. automatically. Set Wiegand Parameters Steps Note You can set the access control device's Wiegand channel and the communication mode. This function should be supported by the device. 1. Enter the Access Control module. 2. On the navigation bar on the left, enter Advanced Function More Parameters . 3. Select an access control device in the device list and click Wiegand to enter the Wiegand 4. Set the switch to on to enable the Wiegand function for the device. 5. Select the Wiegand channel No. and the communication mode from the drop-down list. Settings page. Note If you set Communication Direction as Sending, you are required to set the Wiegand Mode as Wiegand 26 or Wiegand 34. 6. Check Enable Wiegand to enable the Wiegand function. 7. Click Save. The configured parameters will be applied to the device automatically. After changing the communication direction, the device will reboot automatically. Enable M1 Card Encryption M1 card encryption can improve the security level of authentication. Steps Note The function should be supported by the access control device and the card reader. 1. Enter the Access Control module. 2. On the navigation bar on the left, enter Advanced Function More Parameters . 3. Select an access control device in the device list and click M1 Card Encryption Verification to enter the M1 Card Encryption Verification page. 4. Set the switch to on to enable the M1 card encryption function. 128 DS-K1T320 Series Face Recogintion Terminal User Manual The sector ID ranges from 1 to 100. By default, Sector 13 is encrypted. It is recommended to encrypt sector 13. 5. Set the sector ID. Note 6. Click Save to save the settings. 15.8 Door Control In Monitoring module, you can view the real-time status of the doors managed by the added access control device. You can also control the doors such as open/close the door, or remain the door open/closed via the client remotely. The real-time access event are displayed in this module. You can view the access details and person details. Note For the user with door control permission, the user can enter the Monitoring module and control the door. Or the icons used for control will not show. For setting the user permission, refer to Person Management . 15.8.1 Control Door Status You can control the status for the door(s), including unlock door, locking door, remaining the door unlock, remaining the door locked, remain all unlocked, etc. Before You Start Add person and assign access authorization to designed person, and person will have the access authorization to the access points (doors). For details, refer to Person Management and Set Access Group to Assign Access Authorization to Persons . Make sure the operation user has the permission of the access points (doors). For details, refer Steps 1. Click Monitoring to enter the status monitoring page. 2. Select an access point group on the upper-right corner. to . Note For managing the access point group, refer to Group Management . The doors in the selected access control group will display. 3. Click a door icon to select a door, or press Ctrl and select multiple doors. 129 DS-K1T320 Series Face Recogintion Terminal User Manual For Remain All Unlocked and Remain All Locked, ignore this step. 4. Click the following buttons to control the door. Note Unlock Lock Remain Unlocked Remain Locked Remain All Unlocked Remain All Locked When the door is locked, unlock it and it will be open for once. After the open duration, the door will be closed and locked again automatically. When the door is unlocked, lock it and it will be closed. The person who has the access authorization can access the door with credentials. The door will be unlocked (no matter closed or open). All the persons can access the door with no credentials required. The door will be closed and locked. No person can access the door even if he/she has the authorized credentials, except the super users. All doors in the group will be unlocked (no matter closed or open). All the persons can access the doors with no credentials required. All doors in the group will be closed and locked. No person can access the doors even if he/she has the authorized credentials, except the super users. Capture Capture a picture manually. Note The Capture button is available when the device supports capture function. The picture is saved in the PC running the client. For setting the saving path, refer to Set File Saving Path in the user manual of the client software. Result The icon of the doors will change in real-time according to the operation if the operation is succeeded. 15.8.2 Check Real-Time Access Records The access records will display in real time, including card swiping records, face recognitions records, fingerprint comparison records, etc. You can view the person information and view the picture captured during access. 130 DS-K1T320 Series Face Recogintion Terminal User Manual Steps 1. Click Monitoring and select a group from the drop-down list on the upper-right corner. The access records triggered at the doors in the selected group will display in real time. You can view the details of the records, including card No., person name, organization, event time, etc. 2. Optional: Check the event type and event status so that these events will show in the list if the events are detected. The events of unchecked type or status will not be displayed in the list. 3. Optional: Check Show Latest Event and the latest access record will be selected and displayed at the top of the record list. 4. Optional: Click the event to view the accessed person details, including person pictures

(captured picture and profile), person No., person name, organization, phone, contact address, etc. Note You can double click the captured picture to enlarge it to view the details. 5. Optional: Right click on the column name of the access event table to show or hide the column according to actual needs. 131 DS-K1T320 Series Face Recogintion Terminal User Manual Chapter 16 Select Language You can select a language for the device system. After the device activation, you can select a language for the device system from the drop-down list. By default, the system language is English. Note After you change the system language, the device will reboot automatically. Click Next to complete the settings. 132 DS-K1T320 Series Face Recogintion Terminal User Manual Chapter 17 Time Settings Set Time and DST Click Wizzard Time Settings . Time Zone Select the device located time zone from the drop-down list. Time Sync. NTP Manual You should set the NTP server's IP address, port No., and interval. By default, the device time should be synchronized manually. You can set the device time manually or check Sync. with Computer Time to synchronize the device time with the computer's time. Server Address Type/Server Address/NTP Port/Interval You can set the server address type, server address, NTP port, and interval. DST Settings Check DST to enable DST settings. Set the DST start time, end time and bias time. Click Next to complete the settings. 133 DS-K1T320 Series Face Recogintion Terminal User Manual Chapter 18 Environment Settings After activating the device, you should select an application mode for better device application. Steps 1. Click Wizard Environment Settings. 2. Select Indoor or Other. Note If you install the device indoors near the window or the face recognition function is not working well, select Others. If you do not configure the application mode and tap Next, the system will select Indoor by default. If you activate the device via other tools remotely, the system will select Indoor as the application mode by default. Click Next to complete the settings. 134 DS-K1T320 Series Face Recogintion Terminal User Manual Chapter 19 Privacy Settings Set the picture uploading and storage parameters. Go to Wizard Privacy Settings . Picture Uploading and Storage Save Picture When Authenticating Save picture when authenticating automatically. Upload Picture When Authenticating Upload the pictures when authenticating to the platform automatically. The registered face picture will be saved to the system if you enable the function. Upload the pictures captured by linked camera to the platform automatically. Save Registered Picture Upload Picture After Linked Capture Save Pictures After Linked Capture Click Next to complete the settings. If you enable this function, you can save the picture captured by linked camera to the device. 135 DS-K1T320 Series Face Recogintion Terminal User Manual Chapter 20 Administrator Settings Steps 1. Click Wizard Administrator Settings . 2. Enter the employee ID and name of the administrator. 3. Select a credential to add. Note You should select at least one credential. 1) Click Add Face to upload a face picture from local storage. The uploaded picture should be within 200 K, in JPGJPEGPNG format. 2) Click Add Card to enter the Card No. and select the property of the card. Note Note Note Up to 5 cards can be supported. 3) Click Add Fingerprint to add fingerprints. Up to 10 fingerprints are allowed. Click Next to complete the settings. 136 DS-K1T320 Series Face Recogintion Terminal User Manual Appendix A. Tips for Scanning Fingerprint Recommended Finger Forefinger, middle finger or the third finger. Correct Scanning The figure displayed below is the correct way to scan your finger:

You should press your finger on the scanner horizontally. The center of your scanned finger should align with the scanner center. Incorrect Scanning The figures of scanning fingerprint displayed below are incorrect:

137 DS-K1T320 Series Face Recogintion Terminal User Manual Environment The scanner should avoid direct sun light, high temperature, humid conditions and rain. When it is dry, the scanner may not recognize your fingerprint successfully. You can blow your finger and scan again. Others If your fingerprint is shallow, or it is hard to scan your fingerprint, we recommend you to use other authentication methods. If you have injuries on the scanned finger, the scanner may not recognize. You can change another finger and try again. 138 DS-K1T320 Series Face Recogintion Terminal User Manual Appendix B. Tips When Collecting/Comparing Face Picture The position when collecting or comparing face picture is as below:

Positions (Recommended Distance: 0.5 m) Expression Keep your expression naturally when collecting or comparing face pictures, just like the expression in the picture below. Do not wear hat, sunglasses, or other accessories that can affect the facial recognition function. Do not make your hair cover your eyes, ears, etc. and heavy makeup is not allowed. 139 DS-K1T320 Series Face Recogintion Terminal User Manual Posture In order to get a good quality and accurate face picture, position your face looking at the camera when collecting or comparing face pictures. Size Make sure your face is in the middle of the collecting window. 140 DS-K1T320 Series Face Recogintion Terminal User Manual Appendix C. Tips for Installation Environment 1. Light Source Illumination Reference Value Candle: 10Lux Bulb: 100~850Lux Sunlight: More than 1200Lux 141 DS-K1T320 Series Face Recogintion Terminal User Manual 2. Avoid backlight, direct and indirect sunlight 142 DS-K1T320 Series Face Recogintion Terminal User Manual Appendix D. Communication Matrix and Device Command Communication Matrix Scan the following QR code to get the device communication matrix. Note that the matrix contains all communication ports of Hikvision access control and video intercom devices. Figure D-1 QR Code of Communication Matrix Device Command Scan the following QR code to get the device common serial port commands. Note that the command list contains all commonly used serial ports commands for all Hikvision access control and video intercom devices. Figure D-2 Device Command 143 UD28901B

HIIK VISION Face Recognition Terminal Model: DS-K1T320EFWX WP: 12V===4A SN: AB1234567 UUVAIOTAAMT NT o==

Made in China FCC ID:2ADTD-K1T320EFWX This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: U K

(1)this device may not cause harmful interference, and

(2)this device must accept any interference received, Cc A including interference that may cause undesired operation. Manufacturer: Hangzhou Hikvision Digital Technology Co.,Ltd. |

Address: No.555 Qianmo Road, Binjiang District,Hangzhou 310052, China

= cE i ao Zi ry w w so o

rf et Oe SI 2

So 96 OL oz 0k stdin tan tmnt

a) b) c) d) e) f) g) SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name Hangzhou Hikvision Digital Technology Co., Ltd. No. 555 Qianmo Road, Binjiang District, Hangzhou 310052, China Address Grantee Code FCC ID Contact Email Contact Phone Authorized Contact Name Long Cheng 2ADTD 2ADTD-K1T320EFWX chenglong6@hikvision.com

+8618969187825 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

labeling the equipment with the exact FCC ID as specified in this application,

(1)

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Date: 2022-08-03 Applicant Signature:

Print Name:

Title:

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Long Cheng Testing & Certification Engineer Applicant Declaration Rev:0.0

Hangzhou Hikvision Digital Technology Co., Ltd. TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Date: 2022-08-03 Regarding: FCC ID: 2ADTD-K1T320EFWX To whom it may concern:

We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Hangzhou Hikvision Digital Technology Co., Ltd. This authorization is valid until further written notice from the applicant. Name (Printed): Long Cheng Signature:

On behalf of Company: Hangzhou Hikvision Digital Technology Co., Ltd. Telephone: +8618969187825 Title: Testing & Certification Engineer

Confidentiality Request regarding application for FCC ID: 2ADTD-K1T320EFWX SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States Hangzhou Hikvision Digital Technology Co., Ltd. To:

From: Hangzhou Hikvision Digital Technology Co., Ltd. No. 555 Qianmo Road, Binjiang District, Hangzhou 310052, China Regarding:

LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature:

Printed Name (on file with the FCC associated with the Grantee Code): Long Cheng Title: Testing & Certification Engineer Company Name: Hangzhou Hikvision Digital Technology Co., Ltd.

Hangzhou Hikvision Digital Technology Co., Ltd. Current Date: 2022-08-03 To:

Dear Sir/Madam, SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. No. 588 West Jindu Road, Songjiang District, Shanghai, China. 201612 Subject: Declaration Letter about Identity of Products

*WE (Hangzhou Hikvision Digital Technology Co., Ltd.) HEREBY DECLARED THAT Product Description Face Recognition Terminal Model No. DS-K1T320EWX,DS-K1T320EWXUHK,DS-K1T320EWXCKV, DS-K1T320EWXUVS,DS-K1T320EWXKVO,DS-K1T320EWXHUN Manufacturers Name Hangzhou Hikvision Digital Technology Co., Ltd. Manufacturers Address No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China

*Except that the model number and appearance deviation, are identical with the original product as follows:

Note: The definition of identical should be electrically identical. A device will be considered to be electrically identical if no changes are made to the devices schematics, board layouts, component layouts, chip sets, resistors and all other electrical aspects of the device are identical with the model(s) we chose to be tested by SGS. Model No. ():

DS-K1T320EFWX Manufacturers Name (): Hangzhou Hikvision Digital Technology Co., Ltd. Manufacturers Address ):

No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Sincerely, Signature ():

Printed Name ():

Long Cheng Position/Title ():

Testing & Certification Engineer Contact Number ():

+8618969187825