FCC ID: 2ADTD-K1T342MFX Face Recognition Terminal

DS-K1T342 Series Face Recognition Terminal User Manual DS-K1T342 Series Face Recognition Terminal User Manual Legal Information 2021 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website ( https://

www.hikvision.com/ ). Please use this Manual with the guidance and assistance of professionals trained in supporting the Product. Trademarks Hikvision in various jurisdictions. Other trademarks and logos mentioned are the properties of their respective owners. and other Hikvision's trademarks and logos are the properties of Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED "AS IS" AND "WITH ALL FAULTS AND ERRORS". HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE i DS-K1T342 Series Face Recognition Terminal User Manual DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATTER PREVAILS. Data Protection During the use of device, personal data will be collected, stored and processed. To protect data, the development of Hikvision devices incorporates privacy by design principles. For example, for device with facial recognition features, biometrics data is stored in your device with encryption method; for fingerprint device, only fingerprint template will be saved, which is impossible to reconstruct a fingerprint image. As data controller, you are advised to collect, store, process and transfer data in accordance with the applicable data protection laws and regulations, including without limitation, conducting security controls to safeguard personal data, such as, implementing reasonable administrative and physical security controls, conduct periodic reviews and assessments of the effectiveness of your security controls. ii DS-K1T342 Series Face Recognition Terminal User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Danger Caution Note Indicates a hazardous situation which, if not avoided, will or could result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results. Provides additional information to emphasize or supplement important points of the main text. iii DS-K1T342 Series Face Recognition Terminal User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body. FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE"

and comply therefore with the applicable harmonized European standards listed iv DS-K1T342 Series Face Recognition Terminal User Manual under the EMC Directive 2014/30/EU, RE Directive 2014/53/EU,the RoHS Directive 2011/65/EU 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see:

www.recyclethis.info 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury

(Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see:www.recyclethis.info This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorise aux deux conditions suivantes :

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. v DS-K1T342 Series Face Recognition Terminal User Manual Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into Dangers and Cautions:

Dangers: Neglecting any of the warnings may cause serious injury or death. Cautions: Neglecting any of the cautions may cause injury or equipment damage. Dangers: Follow these safeguards to prevent serious injury or death. Cautions: Follow these precautions to prevent potential injury or material damage. Danger:

In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region. Do not connect several devices to one power adapter as adapter overload may cause over-heat or fire hazard. If smoke, odors or noise rise from the device, turn off the power at once and unplug the power cable, and then please contact the service center. The socket-outlet shall be installed near the equipment and shall be easily accessible. 1. Do not ingest battery. Chemical burn hazard!

2. This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. 3. Keep new and used batteries away from children. 4. If the battery compartment does not close securely, stop using the product and keep it away from children. 5. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. 6. CAUTION: Risk of explosion if the battery is replaced by an incorrect type. 7. Improper replacement of the battery with an incorrect type may defeat a safeguard (for example, in the case of some lithium battery types). 8. Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery, which may result in an explosion. 9. Do not leave the battery in an extremely high temperature surrounding environment, which may result in an explosion or the leakage of flammable liquid or gas. 10. Do not subject the battery to extremely low air pressure, which may result in an explosion or the leakage of flammable liquid or gas. 11. Dispose of used batteries according to the instructions. vi DS-K1T342 Series Face Recognition Terminal User Manual Cautions:

Do not drop the device or subject it to physical shock, and do not expose it to high electromagnetism radiation. Avoid the equipment installation on vibrations surface or places subject to shock (ignorance can cause equipment damage). Do not place the device in extremely hot (refer to the specification of the device for the detailed operating temperature), cold, dusty or damp locations, and do not expose it to high electromagnetic radiation. Exposing the equipment to direct sun light, low ventilation or heat source such as heater or radiator is forbidden (ignorance can cause fire danger). The device cover for indoor use shall be kept from rain and moisture. Exposing the equipment to direct sun light, low ventilation or heat source such as heater or radiator is forbidden (ignorance can cause fire danger). Please use a soft and dry cloth when clean inside and outside surfaces of the device cover, do not use alkaline detergents. Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher security level, use multiple authentication modes. The serial port of the equipment is used for debugging only. Install the equipment according to the instructions in this manual. To prevent injury, this equipment must be securely attached to the floor/wall in accordance with the installation instructions. Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or equivalent type only. Dispose of used batteries according to the instructions provided by the battery manufacturer. This bracket is intended for use only with equipped devices. Use with other equipment may result in instability causing injury. This equipment is for use only with equipped bracket. Use with other (carts, stands, or carriers) may result in instability causing injury. vii DS-K1T342 Series Face Recognition Terminal User Manual Available Models Product Name Model Wireless Face Recognition Terminal DS-K1T342MX DS-K1T342MWX DS-K1T342MFX DS-K1T342MFWX DS-K1T342EX DS-K1T342EWX DS-K1T342EFWX DS-K1T342DX DS-K1T342DWX 13.56 MHz Card Presenting Frequency 13.56 MHz Card Presenting Frequency, Wi-Fi (2.4 GHz) 13.56 MHz Card Presenting Frequency 13.56 MHz Card Presenting Frequency, Wi-Fi (2.4 GHz) 125 KHz Card Presenting Frequency 125 KHz Card Presenting Frequency, Wi-Fi (2.4 GHz) 125 KHz Card Presenting Frequency, Wi-Fi (2.4 GHz) 13.56 MHz Card Presenting Frequency 13.56 MHz Card Presenting Frequency, Wi-Fi (2.4 GHz) Use only power supplies listed in the user instructions:

Model Manufacturer Standard ADS-12FG-12N 12012EPG Shenzhen Honor Electronic Co., Ltd PG viii DS-K1T342 Series Face Recognition Terminal User Manual Contents Chapter 1 Overview .................................................................................................................... 1 1.1 Overview ................................................................................................................................ 1 1.2 Features ................................................................................................................................. 1 Chapter 2 Appearance ................................................................................................................ 2 Chapter 3 Installation ................................................................................................................. 5 3.1 Installation Environment ........................................................................................................ 5 3.2 Install with Gang Box ............................................................................................................. 5 3.3 Surface Mounting .................................................................................................................. 8 3.4 Mount With Bracket ............................................................................................................. 14 3.4.1 Preparation before Mounting with Bracket ................................................................ 14 3.4.2 Mount Bracket ............................................................................................................ 15 3.5 Mount With Cylinder Bracket .............................................................................................. 16 3.5.1 Preparation before Mounting with Bracket ................................................................ 16 3.5.2 Cylinder Bracket Mounting ......................................................................................... 18 Chapter 4 Wiring ...................................................................................................................... 20 4.1 Terminal Description ............................................................................................................ 20 4.2 Wire Normal Device ............................................................................................................. 21 4.3 Wire Secure Door Control Unit ............................................................................................ 22 4.4 Wire Fire Module ................................................................................................................. 23 4.4.1 Wiring Diagram of Door Open When Powering Off .................................................... 23 4.4.2 Wiring Diagram of Door Locked When Powering Off .................................................. 25 Chapter 5 Activation ................................................................................................................. 27 5.1 Activate via Device ............................................................................................................... 27 5.2 Activate via Web Browser .................................................................................................... 29 5.3 Activate via SADP ................................................................................................................. 30 5.4 Activate Device via iVMS-4200 Client Software ................................................................... 31 ix DS-K1T342 Series Face Recognition Terminal User Manual Chapter 6 Quick Operation ....................................................................................................... 33 6.1 Select Language ................................................................................................................... 33 6.2 Set Application Mode .......................................................................................................... 35 6.3 Set Network Parameters ...................................................................................................... 36 6.4 Access to Platform ............................................................................................................... 38 6.5 Link to Mobile Client ............................................................................................................ 40 6.6 Privacy Settings .................................................................................................................... 41 6.7 Set Administrator ................................................................................................................. 43 Chapter 7 Basic Operation ........................................................................................................ 46 7.1 Login .................................................................................................................................... 46 7.1.1 Login by Administrator ................................................................................................ 46 7.1.2 Login by Activation Password ...................................................................................... 49 7.1.3 Forgot Password .......................................................................................................... 50 7.2 Communication Settings ...................................................................................................... 51 7.2.1 Set Wired Network Parameters .................................................................................. 51 7.2.2 Set Wi-Fi Parameters ................................................................................................... 53 7.2.3 Set RS-485 Parameters ................................................................................................ 55 7.2.4 Set Wiegand Parameters ............................................................................................. 57 7.2.5 Set ISUP Parameters .................................................................................................... 59 7.2.6 Platform Access ........................................................................................................... 61 7.3 User Management ............................................................................................................... 62 7.3.1 Add Administrator ....................................................................................................... 62 7.3.2 Add Face Picture ......................................................................................................... 64 7.3.3 Add Fingerprint ........................................................................................................... 66 7.3.4 Add Card ..................................................................................................................... 67 7.3.5 View PIN code ............................................................................................................. 68 7.3.6 Set Authentication Mode ............................................................................................ 69 7.3.7 Search and Edit User ................................................................................................... 69 x DS-K1T342 Series Face Recognition Terminal User Manual 7.4 Data Management ............................................................................................................... 70 7.4.1 Delete Data ................................................................................................................. 70 7.4.2 Import Data ................................................................................................................. 70 7.4.3 Export Data ................................................................................................................. 71 7.5 Identity Authentication ........................................................................................................ 71 7.5.1 Authenticate via Single Credential .............................................................................. 71 7.5.2 Authenticate via Multiple Credential .......................................................................... 72 7.6 Basic Settings ....................................................................................................................... 72 7.7 Set Biometric Parameters .................................................................................................... 74 7.8 Set Access Control Parameters ............................................................................................ 77 7.9 Time and Attendance Status Settings .................................................................................. 79 7.9.1 Disable Attendance Mode via Device ......................................................................... 80 7.9.2 Set Manual Attendance via Device ............................................................................. 81 7.9.3 Set Auto Attendance via Device .................................................................................. 83 7.9.4 Set Manual and Auto Attendance via Device .............................................................. 85 7.10 Set Preference .................................................................................................................... 87 7.11 System Maintenance .......................................................................................................... 89 Chapter 8 Configure the Device via the Mobile Browser ........................................................... 92 8.1 Login .................................................................................................................................... 92 8.2 Search Event ........................................................................................................................ 92 8.3 User Management ............................................................................................................... 92 8.4 Configuration ....................................................................................................................... 94 8.4.1 View Device Information ............................................................................................. 94 8.4.2 Time Settings ............................................................................................................... 94 8.4.3 View Open Source Software License ........................................................................... 95 8.4.4 Network Settings ......................................................................................................... 95 8.4.5 General Settings .......................................................................................................... 98 8.4.6 Face Parameters Settings .......................................................................................... 104 xi DS-K1T342 Series Face Recognition Terminal User Manual 8.4.7 Video Intercom Settings ............................................................................................ 108 8.4.8 Access Control Settings ............................................................................................. 110 Chapter 9 Operation via Web Browser .................................................................................... 116 9.1 Login .................................................................................................................................. 116 9.2 Live View ............................................................................................................................ 116 9.3 Person Management .......................................................................................................... 118 9.4 Search Event ...................................................................................................................... 119 9.5 Configuration ..................................................................................................................... 119 9.5.1 Set Local Parameters ................................................................................................. 119 9.5.2 View Device Information ........................................................................................... 120 9.5.3 Set Time .................................................................................................................... 120 9.5.4 Set DST ...................................................................................................................... 121 9.5.5 View Open Source Software License ......................................................................... 122 9.5.6 Upgrade and Maintenance ....................................................................................... 122 9.5.7 Log Query .................................................................................................................. 123 9.5.8 Security Mode Settings ............................................................................................. 123 9.5.9 Certificate Management ........................................................................................... 124 9.5.10 Change Administrator's Password ........................................................................... 125 9.5.11 View Device Arming/Disarming Information .......................................................... 126 9.5.12 Network Settings ..................................................................................................... 126 9.5.13 Set Video and Audio Parameters ............................................................................ 129 9.5.14 Customize Audio Content ....................................................................................... 131 9.5.15 Set Image Parameters ............................................................................................. 132 9.5.16 Set Supplement Light Brightness ............................................................................ 133 9.5.17 Time and Attendance Settings ................................................................................ 134 9.5.18 General Settings ...................................................................................................... 136 9.5.19 Video Intercom Settings .......................................................................................... 142 9.5.20 Access Control Settings ........................................................................................... 144 xii DS-K1T342 Series Face Recognition Terminal User Manual 9.5.21 Set Biometric Parameters ....................................................................................... 147 9.5.22 Set Notice Publication ............................................................................................. 151 Chapter 10 Client Software Configuration ............................................................................... 154 10.1 Configuration Flow of Client Software ............................................................................. 154 10.2 Device Management ........................................................................................................ 154 10.2.1 Add Device .............................................................................................................. 155 10.2.2 Reset Device Password ........................................................................................... 157 10.2.3 Manage Added Devices .......................................................................................... 158 10.3 Group Management ......................................................................................................... 159 10.3.1 Add Group ............................................................................................................... 159 10.3.2 Import Resources to Group ..................................................................................... 159 10.4 Person Management ........................................................................................................ 160 10.4.1 Add Organization .................................................................................................... 160 10.4.2 Import and Export Person Identify Information ...................................................... 160 10.4.3 Get Person Information from Access Control Device .............................................. 163 10.4.4 Issue Cards to Persons in Batch ............................................................................... 163 10.4.5 Report Card Loss ..................................................................................................... 164 10.4.6 Set Card Issuing Parameters .................................................................................... 164 10.5 Configure Schedule and Template ................................................................................... 165 10.5.1 Add Holiday ............................................................................................................. 166 10.5.2 Add Template .......................................................................................................... 166 10.6 Set Access Group to Assign Access Authorization to Persons .......................................... 168 10.7 Configure Advanced Functions ........................................................................................ 170 10.7.1 Configure Device Parameters .................................................................................. 170 10.7.2 Configure Device Parameters .................................................................................. 176 10.8 Door Control .................................................................................................................... 179 10.8.1 Control Door Status ................................................................................................. 179 10.8.2 Check Real-Time Access Records ............................................................................ 180 xiii DS-K1T342 Series Face Recognition Terminal User Manual Appendix A. Tips for Scanning Fingerprint ............................................................................... 182 Appendix B. Tips When Collecting/Comparing Face Picture .................................................... 184 Appendix C. Tips for Installation Environment ........................................................................ 186 Appendix D. Dimension .......................................................................................................... 187 Appendix E. Communication Matrix and Device Command ..................................................... 189 xiv DS-K1T342 Series Face Recognition Terminal User Manual Chapter 1 Overview 1.1 Overview Face recognition terminal is a kind of access control device for face recognition, which is mainly applied in security access control systems, such as logistic centers, airports, university campuses, alarm centrals, dwellings, etc. 1.2 Features 4.3-inch LCD touch screen, 272 480 screen resolution, real-time detection and display of the maximum face frame. 2 MP wide-angle dual-lens Supports multiple authentication modes: face, fingerprint, card, PIN code and multiple combination authentication. Supports access control period control (plan template) and authorize door opening on demand. Supports network operation and issuing personnel authority information via the platform. Supports data network upload function, which can upload device comparison results and linkage capture pictures to the platform in real time. When the device is offline, events generated when the device is connected to the platform will be uploaded again. Supports NTP, manual, and automatic time calibration. Supports video intercom between devices. Supports remote video preview and output video code streams via the RTSP protocol. Support watchdog guard mechanism, tamper design to ensure the device work properly. Supports mask detection modes including reminder of wearing mode and must wear mask mode. Supports IP65. 1 DS-K1T342 Series Face Recognition Terminal User Manual Chapter 2 Appearance 1 2 3 4 5 6 7 8 9 Figure 2-1 With Fingerprint Module Table 2-1 Appearance Description No. Name USB Interface Loudspeaker IR Light Camera MIC Camera Touch Screen Fingerprint Recognition Area/Card Presenting Area Debugging Port (for debugging only) 2 10 11 12 1 2 3 4 5 6 DS-K1T342 Series Face Recognition Terminal User Manual No. Name Wiring Terminal Network Interface Tamper Figure 2-2 Without Fingerprint Module Table 2-2 Appearance Description No. Name USB Interface Loudspeaker IR Light Camera MIC Camera 3 DS-K1T342 Series Face Recognition Terminal User Manual 7 8 9 10 11 12 No. Name Touch Screen Card Presenting Area Debugging Port (for debugging only) Wiring Terminal Network Interface Tamper 4 DS-K1T342 Series Face Recognition Terminal User Manual Chapter 3 Installation 3.1 Installation Environment Avoid backlight, direct sunlight, and indirect sunlight. For better recognition, there should be light source in or near the installation environment. The minimum bearing weight of the wall or other places should be 3 times heavier than the device weight. There shall be no strong reflective objects (such as glass doors/walls, stainless steel objects, acrylic and other glossy plastics, lacquer, ceramic tiles, etc.) within 1 m of the field of view of the device. Avoid device reflection. Face recognition distance shall be greater than 30 cm. Keep the camera clean. Note For details about installation environment, see Tips for Installation Environment. 3.2 Install with Gang Box Steps 1. Make sure the gang box is installed on the wall. Note You should purchase the gang box separately. 5 DS-K1T342 Series Face Recognition Terminal User Manual 2. Secure the mounting plate on the gang box with two supplied screws (SC-KA4X22). Figure 3-1 Install Gang Box 3. Route the cable through the cable hole, wire the cables and insert the cables in the gang box. Figure 3-2 Install Mounting Plate 6 DS-K1T342 Series Face Recognition Terminal User Manual 4. Align the device with the mounting plate, and secure the device on the mounting plate with 1 supplied screw (SC-KM3X6-T10-SUSS). Figure 3-3 Apply Silicone Sealant 7 DS-K1T342 Series Face Recognition Terminal User Manual Figure 3-4 Secure Device 3.3 Surface Mounting Steps 1. According to the datum line on the mounting template, stick the mounting template on the wall or other surfaces, 1.45 meters higher than the ground. 8 DS-K1T342 Series Face Recognition Terminal User Manual Figure 3-5 Mounting Template 2. Drill holes on the wall or other surface according to the Hole 1 on the mounting template. 3. Insert the plastic sleeve of expansion bolts into the holes. 4. Align the holes to the mounting plate and secure the mounting plate on the wall with the 2 supplied screws (KA422-SUS). 9 DS-K1T342 Series Face Recognition Terminal User Manual 5. Route the cable through the cable hole of the mounting plate, and connect to corresponding Figure 3-6 Install Mounting Plate peripherals cables. Note If the device is installed outdoor, you should apply silicone sealant to the wiring exit to avoid water from entering. 10 DS-K1T342 Series Face Recognition Terminal User Manual 6. Align the device with the mounting plate and hang the device on the mounting plate. Figure 3-7 Apply Silicone Sealant 11 DS-K1T342 Series Face Recognition Terminal User Manual 7. Use 1 supplied screw (KM36-SUS) to secure the device and the mounting plate. Figure 3-8 Hang Device 12 DS-K1T342 Series Face Recognition Terminal User Manual Figure 3-9 Secure Device Note The recommended installation height is 1.45 meters, you can set the installtion height according your needs. It's recommended to use the supplied mounting plate. 8. After installation, for the proper use of the device (outdoor use), stick the protection film (parts of models supplied) on the screen. 13 DS-K1T342 Series Face Recognition Terminal User Manual 3.4 Mount With Bracket 3.4.1 Preparation before Mounting with Bracket Steps 1. Drill holes on the turnstile's surface according to the figure displayed below. And install water-

proof nut. Note Solder after pressing rivets to avoid water from entering. Figure 3-10 Drill Holes on Turnstile 2. If the installation angle needs to be 180 perpendicular to the body of the turnstile, the following operations are required. 1) Take off the 3 screws shown in the following figure. Figure 3-11 Take off Screws 2) Rotate the fixed part by 180, and install the 3 screws back. 14 DS-K1T342 Series Face Recognition Terminal User Manual Figure 3-12 Rotate Fixed Part 3.4.2 Mount Bracket Steps 1. Install the base on the turnstile. 1) Align the hole on the turnstile and place the base on the turnstile. 2) Rotate the base to the acquired place and make sure the device will face a correct direction. 3) Secure the base with wrench. Figure 3-13 Install Base Note Install a piece of silicone pad on the front and back of the turnstile. 2. Install the mounting template on the bracket with 4 supplied screw (SC-K1M46-SUS). 15 DS-K1T342 Series Face Recognition Terminal User Manual Figure 3-14 Secure Mounting Template 3. Route the cables through the cable hole on the turnstile and fix the device into the mounting plate with 1 SC-KM36-T10-SUS screw. Figure 3-15 Fix the Device 4. After installation, for the proper use of the device (outdoor use), stick the protection film (parts of models supplied) on the screen. 3.5 Mount With Cylinder Bracket 3.5.1 Preparation before Mounting with Bracket Make sure you have drilled holes on the turnstile. If not, follow the steps below to drill holes. Steps 1. Use 4 screws (M3 or M4), secured by flange nuts, to install the reinforcing board on the inner surface of the turnstile. Note The distance between the turnstile and the edge should be no longer than 10 mm. 2. Drill holes on the turnstile's inner surface according to the figure displayed below. And install water-proof nut. 16 DS-K1T342 Series Face Recognition Terminal User Manual Note Solder after pressing rivets to avoid water from entering. Figure 3-16 Drill Holes on Turnstile 3. Solder the other four holes, polish the surface, and implement wire drawing. 4. Solder circular tubes on the turnstiles inner surface to avoid water from entering. 17 DS-K1T342 Series Face Recognition Terminal User Manual Figure 3-17 Solder Tubes 3.5.2 Cylinder Bracket Mounting Steps 1. Install the base on the turnstile. 1) Align the hole on the turnstile and place the base on the turnstile. 2) Rotate the base to the acquired place and make sure the device will face a correct direction. 3) Secure the base with 4 SC-OM612-H-SUS screws. 2. Fix the mounting plate into the bracket by 4 SC-K1M46-SUS screws. Figure 3-18 Install Base 18 DS-K1T342 Series Face Recognition Terminal User Manual 3. Route the cables through the cable hole on the turnstile. 4. Fix the face recognition terminal into the mounting plate with 1 SC-KM36-H2-SUS screw. Figure 3-19 Fix Mounting Plate Figure 3-20 Fix Mounting Plate 5. After installation, for the proper use of the device (outdoor use), stick the protection film (parts of models supplied) on the screen. 19 DS-K1T342 Series Face Recognition Terminal User Manual Chapter 4 Wiring You can connect the RS-485 terminal with the RS-485 card reader, connect the NC/NO and COM terminal with the door lock, connect the SEN and GND terminal with the door contact, the BTN/GND terminal with the exit button, and connect the Wiegand terminal with the Wiegand card reader or the access controller. If connect the WIEGAND terminal with the access controller, the face recognition terminal can transmit the authentication information to the access controller and the access controller can judge whether to open the door or not. Note If cable size is 18 AWG, you should use a 12 V power supply. And the distance between the power supply and the device should be no more than 20 m. If the cable size is 15 AWG, you should use a 12 V power supply. And the distance between the power supply and the device should be no more than 30 m. If the cable size is 12 AWG, you should use a 12 V power supply. And the distance between the power supply and the device should be no more than 40 m. The external card reader, door lock, exit button, and door magnetic need individual power supply. 4.1 Terminal Description The terminals contains power input, RS-485, Wiegand output, and door lock. The descriptions of the terminals are as follows:

Group No. Function Color Name Description Table 4-1 Terminal Descriptions Group A Group B Group C A1 A2 B1 B2 B3 C1 Power Input Red

+12 V RS-485 Wiegand Black Yellow Blue Black Green GND 485+

485-

GND W0 12 VDC Power Supply Ground RS-485 Wiring Ground Wiegand Wiring 0 20 DS-K1T342 Series Face Recognition Terminal User Manual Group No. Function Color Name Description Group D C2 C3 D1 D2 D3 D4 D5 D6 White Black W1 GND Door Lock White/Purple NC White/Yellow COM White/Red NO Wiegand Wiring 1 Ground Lock Wiring

(NC) Common Lock Wiring

(NO) Yellow/Green SENSOR Door Contact Black GND Yellow/Grey BUTTON Ground Exit Door Wiring 4.2 Wire Normal Device You can connect the terminal with normal peripherals. 21 DS-K1T342 Series Face Recognition Terminal User Manual Figure 4-1 Device Wiring Note You should set the face recognition terminal's Wiegand direction as Input to connect to a Wiegand card reader. If connects to an access controller, you should set the Wiegand direction as Output to transmit authentication information to the access controller. For details about Wiegand direction settings, see Set Wiegand Parameters . Do not wire the device to the electric supply directly. 4.3 Wire Secure Door Control Unit You can connect the terminal with the secure door control unit. The wiring diagram is as follows. 22 DS-K1T342 Series Face Recognition Terminal User Manual Figure 4-2 Secure Door Control Unit Wiring Note The secure door control unit should connect to an external power supply separately. The suggested external power supply is 12V, 0.5A. 4.4 Wire Fire Module 4.4.1 Wiring Diagram of Door Open When Powering Off Lock Type: Anode Lock, Magnetic Lock, and Electric Bolt (NO) Security Type: Door Open When Powering Off Scenario: Installed in Fire Engine Access Type 1 Note The fire system controls the power supply of the access control system. 23 DS-K1T342 Series Face Recognition Terminal User Manual Figure 4-3 Wire Device Figure 4-4 Wire Secure Door Control Unit Type 2 Note The fire system (NO and COM, normally open when powering off) is connected with the lock and the power supply in series. When an fire alarm is triggered, the door remains open. In normal times, NO and COM are closed. 24 DS-K1T342 Series Face Recognition Terminal User Manual Figure 4-5 Wiring Device Figure 4-6 Wiring Secure Door Control Unit 4.4.2 Wiring Diagram of Door Locked When Powering Off Lock Type: Cathode Lock, Electric Lock, and Electric Bolt (NC) Security Type: Door Locked When Powering Off Scenario: Installed in Entrance/Exit with Fire Linkage 25 DS-K1T342 Series Face Recognition Terminal User Manual Note The Uninterpretable Power Supply (UPS) is required. The fire system (NC and COM, normally closed when powering off) is connected with the lock and the power supply in series. When an fire alarm is triggered, the door remains open. In normal times, NC and COM are open. Figure 4-7 Device Wiring Figure 4-8 Wiring Diagram 26 DS-K1T342 Series Face Recognition Terminal User Manual Chapter 5 Activation You should activate the device before the first login. After powering on the device, the system will switch to Device Activation page. Activation via the device, SADP tool and the client software are supported. The default values of the device are as follows:

The default IP address: 192.0.0.64 The default port No.: 8000 The default user name: admin 5.1 Activate via Device If the device is not activated, you can activate the device after it is powered on. On the Activate Device page, create a password and confirm the password. Tap Activate and the device will activated. 27 DS-K1T342 Series Face Recognition Terminal User Manual Figure 5-1 Activation Page Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least 28 DS-K1T342 Series Face Recognition Terminal User Manual three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product. Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user. Note Characters containing admin and nimda are not supported to be set as activation password. After activation, you should select a language according to your actual needs. After activation, you should select an application mode. For details, see Set Application Mode . After activation, you should set the network. For details, see Set Network Parameters . After activation, you can add the device to the platform. For details, see Access to Platform . After activation, if you need to set privacy, you should check the item. For details, see Privacy Settings . After activation, if you need to add administrator to manage the device parameters, you should set administrator. For details, see Add Administrator . 5.2 Activate via Web Browser You can activate the device via the web browser. Steps 1. Enter the device default IP address (192.0.0.64) in the address bar of the web browser, and press Enter. Note Make sure the device IP address and the computer's should be in the same IP segment. 2. Create a new password (admin password) and confirm the password. Caution STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product. Note Characters containing admin and nimda are not supported to be set as activation password. 3. Click Activate. 29 DS-K1T342 Series Face Recognition Terminal User Manual 4. Edit the device IP address. You can edit the IP address via the SADP tool, the device, and the client software. 5.3 Activate via SADP SADP is a tool to detect, activate and modify the IP address of the device over the LAN. Before You Start Get the SADP software from the supplied disk or the official website http://

www.hikvision.com/en/ , and install the SADP according to the prompts. The device and the PC that runs the SADP tool should be within the same subnet. The following steps show how to activate a device and modify its IP address. For batch activation and IP addresses modification, refer to User Manual of SADP for details. Steps 1. Run the SADP software and search the online devices. 2. Find and select your device in online device list. 3. Input new password (admin password) and confirm the password. Caution STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product. Note Characters containing admin and nimda are not supported to be set as activation password. 4. Click Activate to start activation. 30 DS-K1T342 Series Face Recognition Terminal User Manual Status of the device becomes Active after successful activation. 5. Modify IP address of the device. 1) Select the device. 2) Change the device IP address to the same subnet as your computer by either modifying the IP address manually or checking Enable DHCP. 3) Input the admin password and click Modify to activate your IP address modification. 5.4 Activate Device via iVMS-4200 Client Software For some devices, you are required to create the password to activate them before they can be added to the iVMS-4200 software and work properly. Steps Note This function should be supported by the device. on the right of Device Management and select Device. 1. Enter the Device Management page. 2. Click 3. Click Online Device to show the online device area. The searched online devices are displayed in the list. 4. Check the device status (shown on Security Level column) and select an inactive device. 5. Click Activate to open the Activation dialog. 6. Create a password in the password field, and confirm the password. 31 DS-K1T342 Series Face Recognition Terminal User Manual Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product. Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user. Note Characters containing admin and nimda are not supported to be set as activation password. 7. Click OK to activate the device. 32 DS-K1T342 Series Face Recognition Terminal User Manual Chapter 6 Quick Operation 6.1 Select Language You can select a language for the device system. After the device activation, you can select a language for the device system. 33 DS-K1T342 Series Face Recognition Terminal User Manual Figure 6-1 Select System Language By default, the system language is English. Note After you change the system language, the device will reboot automatically. 34 DS-K1T342 Series Face Recognition Terminal User Manual 6.2 Set Application Mode After activating the device, you should select an application mode for better device application. Steps 1. On the Welcome page, select Indoor or Others from the drop-down list. Figure 6-2 Welcome Page 35 DS-K1T342 Series Face Recognition Terminal User Manual 2. Tap OK to save. Note You can also change the settings in System Settings. If you install the device indoors near the window or the face recognition function is not working well, select Others. If you do not configure the application mode and tap Next, the system will select Indoor by default. If you activate the device via other tools remotely, the system will select Indoor as the application mode by default. 6.3 Set Network Parameters After activation and select application mode, you can set the network for the device Steps 1. When you enter the Select Network page, tap Wired Network or Wi-Fi for your actual needs. 36 DS-K1T342 Series Face Recognition Terminal User Manual Figure 6-3 Select Network Note Disconnect the wired network before connecting a Wi-Fi. 2. Tap Next. Wired Network 37 DS-K1T342 Series Face Recognition Terminal User Manual Note Make sure the device has connected to a network. If enable DHCP, the system will assign the IP address and other parameters automatically. If disable DHCP, you should set the IP address, the subnet mask, and the gateway. Wi-Fi Select a Wi-Fi and enter the Wi-Fi's password to get connected. Or tap Add Wi-Fi and enter the Wi-Fi's name and the password to get connected. 3. Optional: Tap Skip to skip network settings. 6.4 Access to Platform Enable the function and the device can communicate via Hik-Connect. You can add the device to Hik-Connect modile client and so on. Steps 1. Enable Access to Hik-Connect, and set the Server IP and Verification Code. 38 DS-K1T342 Series Face Recognition Terminal User Manual Figure 6-4 Access to Hik-Connect 2. Tap Next. Note If you tap Previous to return to the Wi-Fi configuration page, you need to tap the connected Wi-

Fi or connect another Wi-Fi to enter the platform page again. 39 DS-K1T342 Series Face Recognition Terminal User Manual 6.5 Link to Mobile Client After activation, selecting application mode, selecting networking, you can add the device to the mobile client. Download and install the mobile client. Use the scan QR code function of the mobile client and scan the QR code displayed on the device to link the device to the mobile client. Follow the instructions to link the device to the mobile client. 40 DS-K1T342 Series Face Recognition Terminal User Manual Figure 6-5 Link to Mobile Client 6.6 Privacy Settings After activation, selecting application mode, and selecting network, you should set the privacy parameters, including the picture uploading and storage. 41 DS-K1T342 Series Face Recognition Terminal User Manual Select parameters according to your actual needs. Figure 6-6 Privacy Upload Captured Pic. When Auth. (Upload Captured Picture When Authenticating) Upload the pictures captured when authenticating to the platform automatically. Save Captured Pic. When Auth. (Save Captured Picture When Authenticating) If you enable this function, you can save the picture when Authenticating to the device. 42 DS-K1T342 Series Face Recognition Terminal User Manual Save Registered Pic. (Save Registered Picture) The registered face picture will be saved to the system if you enable the function. Upload Pic. After Linked Capture (Upload Picture After Linked Capture) Upload the pictures captured by linked camera to the platform automatically. Save Pic. After Linked Capture (Save Pictures After Linked Capture) If you enable this function, you can save the picture captured by linked camera to the device. Tap Next to complete the settings. 6.7 Set Administrator After device activation, you can add an administrator to manage the device parameters. Before You Start Activate the device and select an application mode. Steps 1. Optional: Tap Skip to skip adding administrator if required. 2. Enter the administrator's name (optional) and tap Next. 43 DS-K1T342 Series Face Recognition Terminal User Manual Figure 6-7 Add Administrator Page 3. Select a credential to add. Note Up to one credential should be added. 44 DS-K1T342 Series Face Recognition Terminal User Manual

: Face forward at the camera. Make sure the face is in the face recognition area. Click to capture and click to confirm.

: Press your finger according to the instructions on the device screen. Click

: Enter the card No. or present card on the card presenting area. Click OK. to confirm. 4. Click OK. You will enter the authentication page. Status Icon Description

Device is armed/not armed.

Hik-Connect is enabled/disabled.

The device wired network is connected/not connected/connecting failed.

The device' Wi-Fi is enabled and connected/not connected/enabled but not connected. Shortcut Keys Description Note You can configure those shortcut keys displayed on the screen. For details, see Basic Settings . Enter the device room No. and tap OK to call. Tap to call the center. Note The device should be added to the center, or the calling operation will be failed. Enter PIN code to authenticate. 45 DS-K1T342 Series Face Recognition Terminal User Manual Chapter 7 Basic Operation 7.1 Login Login the device to set the device basic parameters. 7.1.1 Login by Administrator If you have added an administrator for the device, only the administrator can login the device for device operation. Steps 1. Long tap on the initial page for 3 s and slide to the left/right by following the gesture to enter the admin login page. 46 DS-K1T342 Series Face Recognition Terminal User Manual 2. Authenticate the administrator's face, fingerprint or card to enter the home page. Figure 7-1 Admin Login 47 DS-K1T342 Series Face Recognition Terminal User Manual Figure 7-2 Home Page Note The device will be locked for 30 minutes after 5 failed fingerprint or card attempts. 3. Optional: Tap 4. Optional: Tap and you can enter the device activation password for login. and you can exit the admin login page. 48 DS-K1T342 Series Face Recognition Terminal User Manual 7.1.2 Login by Activation Password You should login the system before other device operations. If you do not configure an administrator, you should follow the instructions below to login. Steps 1. Long tap on the initial page for 3 s and slide to the left/right by following the gesture to enter password entering page. 2. Enter the password.

If you have added an administrator for the device, tap If you haven't added an administrator for the device, enter the password. and enter the password. 3. Tap OK to enter the home page. Note The device will be locked for 30 minutes after 5 failed password attempts. 49 DS-K1T342 Series Face Recognition Terminal User Manual Figure 7-3 Home Page 7.1.3 Forgot Password If you forget the password during authentication, you can reset the password by importing the key. 50 DS-K1T342 Series Face Recognition Terminal User Manual Steps 1. Long tap on the initial page for 3 s and slide to the left/right by following the gesture and log in the page. in the pop-up admin authentication page. 2. Tap 3. Plug USB flash drive into the USB interface. Note The supported USB flash drive formats are FAT32 and exfat. The device supports 1 G to 32 G (including 1 G and 32 G) USB flash drive. Make sure that the free space of the USB flash drive is more than 512 M. 4. Tap Export File, and contact the technician to get the key, and enter the key in the export file. 5. Tap Import File to import the file with the key to the device. 6. Follow the prompts to reset the password. 7.2 Communication Settings You can set the wired network, the Wi-Fi parameter, the RS-485 parameters, the Wiegand parameters, ISUP and access to Hik-Connect on the communication settings page. 7.2.1 Set Wired Network Parameters You can set the device wired network parameters, including the IP address, the subnet mask, the gateway, and DNS parameters. Steps 1. Tap Comm. (Communication Settings) on the Home page to enter the Communication Settings page. 2. On the Communication Settings page, tap Wired Network. 51 DS-K1T342 Series Face Recognition Terminal User Manual Figure 7-4 Wired Network Settings 3. Set IP Address, Subnet Mask, and Gateway.

- Enable DHCP, and the system will assign IP address, subnet mask, and gateway automatically.

- Disable DHCP, and you should set the IP address, subnet mask, and gateway manually. 52 DS-K1T342 Series Face Recognition Terminal User Manual Note The device's IP address and the computer IP address should be in the same IP segment. 4. Set the DNS parameters. You can enable Auto Obtain DNS, set the preferred DNS server and the alternate DNS server. 7.2.2 Set Wi-Fi Parameters You can enable the Wi-Fi function and set the Wi-Fi related parameters. Steps Note The function should be supported by the device. 1. Tap Comm. (Communication Settings) on the Home page to enter the Communication Settings page. 2. On the Communication Settings page, tap. 53 DS-K1T342 Series Face Recognition Terminal User Manual 3. Enable the Wi-Fi function. 4. Configure the Wi-Fi parameters. Figure 7-5 Wi-Fi Settings

- Select a Wi-Fi from the list, and enter the Wi-Fi's password. Tap OK.

If the target Wi-Fi is not in the list,tap Add Wi-Fi. Enter the Wi-Fi's name and password. And tap OK. 54 DS-K1T342 Series Face Recognition Terminal User Manual Note Only digits, letters, and special characters are allowed in the password. 5. Set the Wi-Fi's parameters.

- By default, DHCP is enable. The system will allocate the IP address, the subnet mask, and the gateway automatically. If disable DHCP, you should enter the IP address, the subnet mask, and the gateway manually.

6. Tap OK to save the settings and go back to the Wi-Fi tab. 7. Tap to save the network parameters. 7.2.3 Set RS-485 Parameters The face recognition terminal can connect external access controller, secure door control unit or card reader via the RS-485 terminal. Steps 1. Tap Comm. (Communication Settings) on the Home page to enter the Communication Settings page. 2. On the Communication Settings page, tap RS-485 to enter the RS-485 tab. 55 DS-K1T342 Series Face Recognition Terminal User Manual 3. Select an peripheral type according to your actual needs. Figure 7-6 Set RS-485 Parameters 56 DS-K1T342 Series Face Recognition Terminal User Manual Note If you select Access Controller: If connect the device to a terminal via the RS-485 interface, set the RS-485 address as 2. If you connect the device to a controller, set the RS-485 address according to the door No. 4. Tap the back icon at the upper left corner and you should reboot the device if you change the parameters. 7.2.4 Set Wiegand Parameters You can set the Wiegand transmission direction. Steps 1. Tap Comm. (Communication Settings) on the Home page to enter the Communication Settings page. 2. On the Communication Settings page, tap Wiegand to enter the Wiegand tab. 57 DS-K1T342 Series Face Recognition Terminal User Manual 3. Enable the Wiegand function. 4. Select a transmission direction. Figure 7-7 Wiegand Settings Output: A face recognition terminal can connect an external access controller. And the two devices will transmit the card No. via Wiegand 26 or Wiegand 34. 5. Tap to save the network parameters. 58 DS-K1T342 Series Face Recognition Terminal User Manual Note If you change the external device, and after you save the device parameters, the device will reboot automatically. 7.2.5 Set ISUP Parameters Set ISUP parameters and the device can upload data via ISUP protocol. Before You Start Make sure your device has connect to a network. Steps 1. Tap Comm. ISUP . 59 DS-K1T342 Series Face Recognition Terminal User Manual Figure 7-8 ISUP Settings 2. Enable the ISUP function and set the ISUP server parameters. ISUP Version Set the ISUP version according to your actual needs. Central Group Enable central group and the data will be uploaded to the center group. 60 DS-K1T342 Series Face Recognition Terminal User Manual Main Channel Support N1 or None. ISUP Enable ISUP function and the data will be uploaded via EHome protocol. Address Type Select an address type according to your actual needs. IP Address Set the ISUP server's IP address. Port No. Set the ISUP server's port No. Note Port No. Range: 0 to 65535. Device ID Set device serial no. Password If you choose V5.0, you should create an account and ISUP key. If you choose other version, you should create an ISUP account only. Note Remember the ISUP account and ISUP key. You should enter the account name or the key when the device should communicate with other platforms via ISUP protocol. ISUP key range: 8 to 32 characters. 7.2.6 Platform Access You can change the device verification code and set the server address before you add the device to the Hik-Connect mobile client. Before You Start Make sure your device has connected to a network. Steps 1. Tap Comm. (Communication Settings) on the Home page to enter the Communication Settings page. 2. On the Communication Settings page, tap Access to Hik-Connect. 3. Enable Access to Hik-Connect 4. Enter Server IP. 5. Create the Verification Code, and you need to enter the verification code when you manage the devices via Hik-Connect. 61 DS-K1T342 Series Face Recognition Terminal User Manual 7.3 User Management On the user management interface, you can add, edit, delete and search the user. 7.3.1 Add Administrator The administrator can log in the device backend and configure the device parameters. Steps 1. Long tap on the initial page and log in the backend. 2. Tap User + to enter the Add User page. 62 DS-K1T342 Series Face Recognition Terminal User Manual 3. Edit the employee ID. Note The employee ID should be less than 32 characters. And it can be a combination of lower letters, upper letters, and numbers. The employee ID should not be duplicated. 4. Tap the Name field and input the user name on the soft keyboard. 63 DS-K1T342 Series Face Recognition Terminal User Manual Note Numbers, upper case letters, lower case letters, and special characters are allowed in the user name. Up to 32 characters are allowed in the user name. 5. Optional: Add a face picture, fingerprints, cards, or Pin for the administrator. Note For details about adding a face picture, see Add Face Picture . Note For details about adding a fingerprint, see Add Fingerprint . For details about adding a card, see Add Card . For details about adding a password, see View PIN code . 6. Optional: Set the administrator's authentication type. Note For details about setting the authentication type, see Set Authentication Mode . 7. Enable the Administrator Permission function. Enable Administrator Permission The user is the administrator. Except for the normal attendance function, the user can also enter the Home page to operate after authenticating the permission. 8. Tap to save the settings. 7.3.2 Add Face Picture Add user's face picture to the device. And the user can use the face picture to authenticate. Steps Note Up to 1500 face pictures can be added. 1. Long tap on the initial page for 3 s and slide to the left/right by following the gesture and log in the backend. 2. Tap User + to enter the Add User page. 3. Edit the employee ID. Note The employee ID should be less than 32 characters. And it can be a combination of lower letters, upper letters, and numbers. The employee ID should not be duplicated. 4. Tap the Name field and input the user name on the soft keyboard. 64 DS-K1T342 Series Face Recognition Terminal User Manual Note Numbers, upper case letters, lower case letters, and special characters are allowed in the user name. The suggested user name should be within 32 characters. 5. Tap the Face Picture field to enter the face picture adding page. Figure 7-9 Add Face Picture 65 DS-K1T342 Series Face Recognition Terminal User Manual 6. Look at the camera. Note Make sure your face picture is in the face picture outline when adding the face picture. Make sure the captured face picture is in good quality and is accurate. For details about the instructions of adding face pictures, see Tips When Collecting/

Comparing Face Picture . After completely adding the face picture, a captured face picture will be displayed at the upper right corner of the page. 7. Tap Save to save the face picture. 8. Optional: Tap Try Again and adjust your face position to add the face picture again. 9. Set the user role. Administrator The user is the administrator. Except for the normal attendance function, the user can also enter the Home page to operate after authenticating the permission. Normal User The User is the normal user. The user can only authenticate or take attendance on the initial page. 10. Tap to save the settings. 7.3.3 Add Fingerprint Add a fingerprint for the user and the user can authenticate via the added fingerprint. Steps Note The function should be supported by the device. Up to 3000 fingerprints can be added. 1. Long tap on the initial page for 3 s and slide to the left/right by following the gesture and enter the device backend. 2. Tap User + to enter the Add User page. 3. Tap the Employee ID. field and edit the employee ID. Note The employee ID should be less than 32 characters. And it can be a combination of lower letters, upper letters, and numbers. The employee ID should not start with 0 and should not be duplicated. 4. Tap the Name field and input the user name on the soft keyboard. 66 DS-K1T342 Series Face Recognition Terminal User Manual Note Numbers, upper case letters, lower case letters, and special characters are allowed in the user name. The suggested user name should be within 32 characters. 5. Tap the Fingerprint field to enter the Add Fingerprint page. 6. Follow the instructions to add a fingerprint. Note The same fingerprint cannot be repeatedly added. Up to 10 fingerprints can be added for one user. You can also use the client software or the fingerprint recorder to record fingerprints. For details about the instructions of scanning fingerprints, see Tips for Scanning Fingerprint . 7. Set the user role. Administrator The user is the administrator. Except for the normal attendance function, the user can also enter the Home page to operate after authenticating the permission. Normal User The User is the normal user. The user can only authenticate or take attendance on the initial page. 8. Tap to save the settings. 7.3.4 Add Card Add a card for the user and the user can authenticate via the added card. Steps Note Up to 3000 cards can be added. 1. Long tap on the initial page for 3 s and slide to the left/right by following the gesture and log in the backend. 2. Tap User + to enter the Add User page. 3. Connect an external card reader according to the wiring diagram. 4. Tap the Employee ID. field and edit the employee ID. Note The employee ID should be less than 32 characters. And it can be a combination of lower letters, upper letters, and numbers. The employee ID should not be duplicated. 5. Tap the Name field and input the user name on the soft keyboard. 67 DS-K1T342 Series Face Recognition Terminal User Manual Note Numbers, upper case letters, lower case letters, and special characters are allowed in the user name. The suggested user name should be within 32 characters. 6. Tap the Card field and tap +. 7. Configure the card No.

- Enter the card No. manually.

- Present the card over the card presenting area to get the card No. Note The card No. cannot be empty. Up to 20 characters are allowed in the card No. The card No. cannot be duplicated. 8. Configure the card type. 9. Set the user role. Administrator The user is the administrator. Except for the normal attendance function, the user can also enter the Home page to operate after authenticating the permission. Normal User The User is the normal user. The user can only authenticate or take attendance on the initial page. 10. Tap to save the settings. 7.3.5 View PIN code Add a PIN code for the user and the user can authenticate via the PIN code. Steps 1. Long tap on the initial page for 3 s and slide to the left/right by following the gesture and log in the backend. 2. Tap User + to enter the Add User page. 3. Tap the Employee ID. field and edit the employee ID. Note The employee ID should be less than 32 characters. And it can be a combination of lower letters, upper letters, and numbers. The employee ID should not be duplicated. 4. Tap the Name field and input the user name on the soft keyboard. 68 DS-K1T342 Series Face Recognition Terminal User Manual Note Numbers, upper case letters, lower case letters, and special characters are allowed in the user name. The suggested user name should be within 32 characters. 5. Tap the PIN code to view the PIN code. Note The PIN code cannot be edited. It can only be applied by the platform. 6. Set the user role. Administrator The user is the administrator. Except for the normal attendance function, the user can also enter the Home page to operate after authenticating the permission. Normal User The User is the normal user. The user can only authenticate or take attendance on the initial page. 7. Tap to save the settings. 7.3.6 Set Authentication Mode After adding the user's face picture, password, or other credentials, you should set the authentication mode and the user can authenticate his/her identity via the configured authentication mode. Steps 1. Long tap on the initial page for 3 s and slide to the left/right by following the gesture and log in the backend. 2. Tap User Add User/Edit User Authentication Mode . 3. Select Device or Custom as the authentication mode. Device If you want to select device mode, you should set the terminal authentication mode in Access Control Settings page first. For details see Setting Access Control Parameters. Custom You can combine different authentication modes together according to your actual needs. 4. Tap to save the settings. 7.3.7 Search and Edit User After adding the user, you can search the user and edit it. 69 DS-K1T342 Series Face Recognition Terminal User Manual Search User On the User Management page, Tap the search area to enter the Search User page. Tap Card on the left of the page and select a search type from the drop-down list. Enter the employee ID, card No., or the user name for search. Tap to search. Edit User On the User Management page, select a user from the user list to enter the Edit User page. Follow the steps in User Management to edit the user parameters. Tap to save the settings. Note The employee ID cannot be edited. 7.4 Data Management You can delete data, import data, and export data. 7.4.1 Delete Data Delete user data. On the Home page, tap Data Delete Data User Data . All user data added in the device will be deleted. 7.4.2 Import Data Steps 1. Plug a USB flash drive in the device. 2. On the Home page, tap Data Import Data . 3. Tap User Data, Face Data or Access Control Parameters . Note The imported access control parameters are configuration files of the device. 4. Enter the created password when you exported the data. If you do not create a password when you exported the data, leave a blank in the input box and tap OK immediately. Note If you want to transfer all user information from one device (Device A) to another (Device B), you should export the information from Device A to the USB flash drive and then import from the USB flash drive to Device B. In this case, you should import the user data before importing the profile photo. The supported USB flash drive format is FAT32. 70 DS-K1T342 Series Face Recognition Terminal User Manual The imported pictures should be saved in the folder (named enroll_pic) of the root directory and the picture's name should be follow the rule below:

Card No._Name_Department_Employee ID_Gender.jpg If the folder enroll_pic cannot save all imported pictures, you can create another folders, named enroll_pic1, enroll_pic2, enroll_pic3, enroll_pic4, under the root directory. The employee ID should be less than 32 characters. It can be a combination of lower letters, upper letters, and numbers. It should not be duplicated, and should not start with 0. Requirements of face picture should follow the rules below: It should be taken in full-face view, directly facing the camera. Do not wear a hat or head covering when taking the face picture. The format should be JPEG or JPG. The resolution should be 640 480 pixel or more than of 640 480 pixel. The picture size should be between 60 KB and 200 KB. 7.4.3 Export Data Steps 1. Plug a USB flash drive in the device. 2. On the Home page, tap Data Export Data . 3. Tap Face Data, Event Data, User Data, or Access Control Parameters. Note The exported access control parameters are configuration files of the device. 4. Optional: Create a password for exporting. When you import those data to another device, you should enter the password. Note The supported USB flash drive format is DB. The system supports the USB flash drive with the storage of 1G to 32G. Make sure the free space of the USB flash drive is more than 512M. The exported user data is a DB file, which cannot be edited. 7.5 Identity Authentication After network configuration, system parameters configuration and user configuration, you can go back to the initial page for identity authentication. The system will authenticate person according to the configured authentication mode. 7.5.1 Authenticate via Single Credential Set the user authentication type before authentication. For details, see Set Authentication Mode . Authenticate face, fingerprint or card. Face 71 DS-K1T342 Series Face Recognition Terminal User Manual Face forward at the camera and start authentication via face. Fingerprint Place the enrolled fingerprint on the fingerprint module and start authentication via fingerprint. Card Present the card on the card presenting area and start authentication via card. Note The card can be normal IC card, or encrypted card. PIN Code Enter the pin code to authenticate via PIN code. If authentication completed, a prompt "Authenticated" will pop up. 7.5.2 Authenticate via Multiple Credential Before You Start Set the user authentication type before authentication. For details, see Set Authentication Mode . Steps 1. If the authentication mode is Card and Face, Password and Face, Card and Password, Card and Face and Fingerprint, authenticate any credential according to the instructions on the live view page. Note The card can be normal IC card, or encrypted card. 2. After the previous credential is authenticated, continue authenticate other credentials. Note For detailed information about scanning fingerprint, see Tips for Scanning Fingerprint. For detailed information about authenticating face, see Tips When Collecting/Comparing Face Picture. If authentication succeeded, the prompt "Authenticated" will pop up. 7.6 Basic Settings You can set the voice, time, sleeping (s), language, community No., building No., and Unit No. Long tap on the initial page for 3 s and slide to the left/right by following the gesture and login the device home page. Tap Basic. 72 DS-K1T342 Series Face Recognition Terminal User Manual Figure 7-10 Basic Settings Page Voice Settings You can enable/disable the voice prompt function and adjust the voice volume. Note You can set the voice volume between 0 and 10. 73 DS-K1T342 Series Face Recognition Terminal User Manual Time Settings Set the time zone, the device time and the DST. Sleeping (s) Set the device sleeping waiting time (minute). When you are on the initial page and if you set the sleeping time to 30 min, the device will sleep after 30 min without any operation. Note If you set the sleeping time to 0, the device will not enter sleeping mode. Select Language Select the language according to actual needs. Community No. Set the device installed community No. Building No. Set the device installed building No. Unit No. Set the device installed unit No. 7.7 Set Biometric Parameters You can customize the face parameters to improve the face recognition performance. The configurable parameters includes select application mode, face liveness level, face recognition distance, face recognition interval, face 1:N security level, face 1:1 security level, ECO settings and face with mask detection. Long tap on the initial page for 3 s and login the home page. Tap Biometric. 74 DS-K1T342 Series Face Recognition Terminal User Manual Figure 7-11 Biometric Parameters Page 75 DS-K1T342 Series Face Recognition Terminal User Manual Parameter Select Application Mode Face Liveness Level Face Recognition Distance Face Recognition Interval Table 7-1 Face Picture Parameters Description Select either others or indoor according to actual environment. After enabling face anti-spoofing function, you can set the matching security level when performing live face authentication. Set the valid distance between the user and the camera when authenticating. The time interval between two continuous face recognitions when authenticating. Note You can input the number from 1 to 10. Face 1:N Security Level Set the matching threshold when authenticating via 1:N matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. Face 1:1 Security Level Set the matching threshold when authenticating via 1:1 matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. ECO Settings After enabling the ECO mode, the device will use the IR camera to authenticate faces in the low light or dark environment. And you can set the ECO mode threshold, ECO mode (1:N), ECO mode (1:1), Face with mask & face (1:1 ECO) and Face with mask & face (1:N ECO). ECO Threshold When enabling the ECO mode, you can set the ECO mode's threshold. The larger the value, the easier the device entering the ECO mode. ECO Mode (1:1) Set the matching threshold when authenticating via ECO mode 1:1 matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. ECO Mode (1:N) Set the matching threshold when authenticating via ECO mode 1:N matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate Face with Mask & Face (1:1 ECO) 76 DS-K1T342 Series Face Recognition Terminal User Manual Parameter Description Face with Mask Detection Set the matching value when authenticating with face mask via ECO mode 1:1 matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. Face with Mask & Face (1:N ECO) Set the matching value when authenticating with face mask via ECO mode 1:N matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. After enabling the face with mask detection, the system will recognize the captured face with mask picture. You can set face with mask & face 1:N level and the strategy. Strategy Set the None, Reminder of Wearing and Must Wear strategy. Reminder of Wearing If the person do not wear a face mask when authenticating, the device prompts a notification and the door will open. Must Wear If the person do not wear a face mask when authenticating, the device prompts a notification and the door keeps closed. None If the person do not wear a face mask when authenticating, the device will not prompt a notification. Face with Mask & Face (1:1) Set the matching value when authenticating with face mask via 1:1 matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. Face with Mask & Face (1:N) Set the matching value when authenticating with face mask via 1:N matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. 7.8 Set Access Control Parameters You can set the access control permissions, including the functions of authentication mode, enable NFC card, enable M1 card, door contact, open duration (s) and authentication interval (s). On the Home page, tap ACS (Access Control Settings) to enter the Access Control Settings page. Edit the access control parameters on this page. 77 DS-K1T342 Series Face Recognition Terminal User Manual The available parameters descriptions are as follows:

Figure 7-12 Access Control Parameters 78 DS-K1T342 Series Face Recognition Terminal User Manual Table 7-2 Access Control Parameters Descriptions Parameter Description Terminal Auth. Mode (Terminal Authentication Mode) Select the face recognition terminal's authentication mode. You can also customize the authentication mode. Note Only the device with the fingerprint module supports the fingerprint related function. Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher security level, use multiple authentication modes. If you adopt multiple authentication modes, you should authenticate other methods before authenticating face. Reader Auth. Mode (Card Reader Authentication Mode) Select the card reader's authentication mode. Enable NFC Card Enable M1 Card Door Contact Open Duration Authentication Interval Enable the function and you can present the NFC card to authenticate. Enable the function and you can present the M1 card to authenticate. You can select "Open (Remain Open)" or "Close (Remian Closed)" according to your actual needs. By default, it is Close

(Remian Closed). Set the door unlocking duration. If the door is not opened for the set time, the door will be locked. Available door locked time range: 1 to 255s. Set the device authenticating interval. Available authentication interval range: 0 to 65535. 7.9 Time and Attendance Status Settings You can set the attendance mode as check in, check out, break out, break in, overtime in, and overtime out according to your actual situation. Note The function should be used cooperatively with time and attendance function on the client software. 79 DS-K1T342 Series Face Recognition Terminal User Manual 7.9.1 Disable Attendance Mode via Device Disable the attendance mode and the system will not display the attendance status on the initial page. Tap T&A Status to enter the T&A Status page. Figure 7-13 Disable Attendance Mode 80 DS-K1T342 Series Face Recognition Terminal User Manual Set the Attendance Mode as Disable. You will not view or configure the attendance status on the initial page. And the system will follow the attendance rule that configured on the platform. 7.9.2 Set Manual Attendance via Device Set the attendance mode as manual, and you should select a status manually when you take attendance. Before You Start Add at least one user, and set the user's authentication mode. For details, see User Management. Steps 1. Tap T&A Status to enter the T&A Status page. 2. Set the Attendance Mode as Manual. 81 DS-K1T342 Series Face Recognition Terminal User Manual Figure 7-14 Manual Attendance Mode 3. Enable the Attendance Status Required. 4. Enable a group of attendance status. Note The Attendance Property will not be changed. 5. Optional: Select an status and change its name if required. 82 DS-K1T342 Series Face Recognition Terminal User Manual The name will be displayed on the T & A Status page and the authentication result page. Result You should select an attendance status manually after authentication. Note If you do not select a status, the authentication will be failed and it will not be marked as a valid attendance. 7.9.3 Set Auto Attendance via Device Set the attendance mode as auto, and you can set the attendance status and its available schedule. The system will automatically change the attendance status according to the configured schedule. Before You Start Add at least one user, and set the user's authentication mode. For details, see User Management. Steps 1. Tap T&A Status to enter the T&A Status page. 2. Set the Attendance Mode as Auto. 83 DS-K1T342 Series Face Recognition Terminal User Manual Figure 7-15 Auto Attendance Mode 3. Enable the Attendance Status function. 4. Enable a group of attendance status. Note The Attendance Property will not be changed. 5. Optional: Select an status and change its name if required. 84 DS-K1T342 Series Face Recognition Terminal User Manual The name will be displayed on the T & A Status page and the authentication result page. 6. Set the status' schedule. 1) Tap Attendance Schedule. 2) Select Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, or Sunday. 3) Set the selected attendance status's start time of the day. 4) Tap Confirm. 5) Repeat step 1 to 4 according to your actual needs. Note The attendance status will be valid within the configured schedule. Result When you authenticate on the initial page, the authentication will be marked as the configured attendance status according to the configured schedule. Example If set the Break Out as Monday 11:00, and Break In as Monday 12:00, the valid user's authentication from Monday 11:00 to 12:00 will be marked as break. 7.9.4 Set Manual and Auto Attendance via Device Set the attendance mode as Manual and Auto, and the system will automatically change the attendance status according to the configured schedule. At the same time you can manually change the attendance status after the authentication. Before You Start Add at least one user, and set the user's authentication mode. For details, see User Management. Steps 1. Tap T&A Status to enter the T&A Status page. 2. Set the Attendance Mode as Manual and Auto. 85 DS-K1T342 Series Face Recognition Terminal User Manual Figure 7-16 Manual and Auto Mode 3. Enable the Attendance Status function. 4. Enable a group of attendance status. Note The Attendance Property will not be changed. 5. Optional: Select an status and change its name if required. 86 DS-K1T342 Series Face Recognition Terminal User Manual The name will be displayed on the T & A Status page and the authentication result page. 6. Set the status' schedule. 1) Tap Attendance Schedule. 2) Select Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, or Sunday. 3) Set the selected attendance status's start time of the day. 4) Tap OK. 5) Repeat step 1 to 4 according to your actual needs. Note The attendance status will be valid within the configured schedule. Result On the initial page and authenticate. The authentication will be marked as the configured attendance status according to the schedule. If you tap the edit icon on the result tab, you can select a status to take attendance manually, the authentication will be marked as the edited attendance status. Example If set the Break Out as Monday 11:00, and Break In as Monday 12:00, the valid user's authentication from Monday 11:00 to 12:00 will be marked as break. 7.10 Set Preference You can configure preference settings parameters. Steps 1. Tap Basic Settings Preference Settings to enter the preference settings page. 87 DS-K1T342 Series Face Recognition Terminal User Manual Shortcut Key Figure 7-17 Preference Settings Choose the shortcut key that displayed on the authentication page, including the QR code function, the call function, call type, and the password entering function. 88 DS-K1T342 Series Face Recognition Terminal User Manual Note You can select call type from Call Room, Call Center, Call Specified Room No. and Call APP. Call Room When you tap the call button on the authentication page, you should dial a room No. to call. Call Center When you tap the call button on the authentication page, you can call the center directly. Call Specified Room No. You should set a room No. When you tap the call button on the authentication page, you can call the configured room directly without dialing. Call APP When you tap the call button on the authentication page, you will call the mobile client where the device is added. Password Enable this function amd you can enter the password to authenticate via password. QR Code You can use the QR code scanning function on the authentication interface. The device will upload the information associated with the obtained QR code to the platform. Theme You can set the theme of the prompt window on the authentication page. You can select Theme as Default/Simple. If select Simple, the live view of the authentication page will be disabled, and in the meanwhile, the person's name, employee ID, face pictures will all be hidden. 7.11 System Maintenance You can view the device system information and capacity. You can also restore the system to factory settings, default settings, unlink APP account, and reboot the system. Long tap on the initial page for 3 s and login the home page. Tap Maint. 89 DS-K1T342 Series Face Recognition Terminal User Manual System Information Figure 7-18 Maintenance Page You can view the device information including serial No., firmware version, MCU version, MAC address, production data, device QR code, open source code license. 90 DS-K1T342 Series Face Recognition Terminal User Manual Note The page may vary according to different device models. Refers to the actual page for details. Capacity You can view the number of administrator, user, face picture, card, and event. Note Parts of the device models support displaying the fingerprint number. Refers to the actual page for details. Upgrade Plug the USB flash drive in the device USB interface. Tap Upgrade OK , and the device will read the digicap.dav file in the USB flash drive to start upgrading. Unlink APP Account Unlink the Hik-Connect account from the platform. Restore to Factory All parameters will be restored to the factory settings. The system will reboot to take effect. Restore to Default All parameters, except for the communication settings, remotely imported user information, will be restored to the default settings. The system will reboot to take effect. Reboot The device will reboot after the confirmation. Long tap

, and enter admin password to view device version information. 91 DS-K1T342 Series Face Recognition Terminal User Manual Chapter 8 Configure the Device via the Mobile Browser 8.1 Login You can login via mobile browser. Note Parts of the model supports Wi-Fi settings. Make sure the device is activated. Obtain the IP address from the device after Wi-Fi is enabled. Make sure the IP segment of the device and the computer is the same. For details, refers to Set Wi-Fi Parameters . Enter the device IP address in the address bar of the mobile browser and press Enter to enter the login page. Enter the device user name and the password. Click Login. 8.2 Search Event Click Search to enter the Search page. Enter the search conditions, including the employee ID, the name, the card No., the start time, and the end time, and click Search. Note Support searching for names within 32 digits. The results will be displayed in the list. 8.3 User Management You can add, edit, delete, and search users via mobile Web browser. Steps 1. Tap User to enter the settings page. 2. Add user. 1) Tap+. 92 DS-K1T342 Series Face Recognition Terminal User Manual 2) Set the following parameters. Employee ID Figure 8-1 Add User Enter the employee ID. The Employee ID cannot be 0 or exceed 32 characters. It can be a combination of uppercase, lowercase letters and numbers. Name 93 DS-K1T342 Series Face Recognition Terminal User Manual Enter your name. The name supports numbers, uppercase and lowercase English, and characters. The name is recommended to be within 32 characters. Gender Select the gender. User Role Select your user role. Floor No./Room No. Enter the floor No./room No. Face Add Face picture. Tap Face, then tapImport, and select the mode to import the face. Fingerprint Add fingerprint. Tap Fingerprint, then tap +, and add fingerprint via the fingerprint module. Start Date/End Date Set Start Date and End Date of user permission. Administrator If the user needs to be set as administrator, you can enable Administrator. Authentication Type Set the authentication type. 3) Tap Save. 3. Tap the user that needs to be edited in the user list to edit the information. 4. Tap the user that needs to be deleted in the user list, and tap 5. You can search the user by entering the employee ID or name in the search bar. to delete the user. 8.4 Configuration 8.4.1 View Device Information View the device name, language, model, serial No., QR code, version, etc. Tap Configuration System System Settings Basic Information to enter the configuration page. You can view the device name, language, model, serial No., QR code, version, etc. 8.4.2 Time Settings Set the time zone, time sync. mode, and displayed time. Tap Configuration System System Settings Time Settings to enter the settings page. 94 DS-K1T342 Series Face Recognition Terminal User Manual Figure 8-2 Time Settings Tap Save to save the settings. Time Zone Select the time zone where the device is located from the drop-down list. Time Sync. Mode Manual By default, the device time should be synchronized manually. You can set the device time manually. NTP Set the NTP server's IP address, port No., and interval. 8.4.3 View Open Source Software License Tap Configuration System System Settings About , and tap View Licenses to view the device license. 8.4.4 Network Settings You can set the port and Wi-Fi parameters. 95 DS-K1T342 Series Face Recognition Terminal User Manual Set Port Parameters You can set the HTTP, RTSP, HTTPS, and Server according to actual needs when accessing the device via network. Tap Configuration Network Basic Settings Port , to enter the settings page. HTTP It refers to the port through which the browser accesses the device. For example, when the HTTP Port is modified to 81, you need to enter http://192.0.0.65:81 in the browser for login. RTSP It refers to the port of real-time streaming protocol. HTTPS Set the HTTPS for accessing the browser. Certificate is required when accessing. Server It refers to the port through which the client adds the device. Set Wi-Fi Parameters Set the Wi-Fi parameters for device wireless connection. Steps Note The function should be supported by the device. 1. Tap Configuration Network Basic Settings Wi-Fi to enter the settings page. 2. Check Enable Wi-Fi. 96 DS-K1T342 Series Face Recognition Terminal User Manual 3. Add Wi-Fi. 1) Tap +. Figure 8-3 Wi-Fi 97 DS-K1T342 Series Face Recognition Terminal User Manual 2) Enter Wi-Fi Name and Wi-Fi Password, and select Working Mode and Encryption Type. 3) Tap Save. Figure 8-4 Add Wi-Fi 4. Select the Wi-Fi name, and tap Connect. 5. Enter the password and tap Save. 6. Set WLAN parameters. 1) Set the IP address, subnet mask, and gateway. Or enable DHCP and the system will allocate the IP address, subnet mask, and gateway automatically. 2) Tap Save. 8.4.5 General Settings Set Authentication Parameters Set Authentication Parameters. Steps 1. Tap Configuration General Settings Authentication Settings . 98 DS-K1T342 Series Face Recognition Terminal User Manual 2. Tap Save. Figure 8-5 Authentication Settings 99 DS-K1T342 Series Face Recognition Terminal User Manual Device Type Main Card Reader You can configure the device card reader's parameters. If you select main card reader, you need to configure the following parameters: Card Reader Type, Card Reader Description, Enable Card Reader, Authentication, Recognition Interval (s), Minimum Card Swiping Interval (s), Max. Authentication Failed Attempts Alarm/Alarm of Max. Failed Attempts, Enable Tampering Detection and Enable Card No. Reversing. Sub Card Reader You can configure the connected peripheral card reader's parameters. If you select sub card reader, you need to configure the following parameters: Card Reader Type, Card Reader Description, Enable Card Reader, Authentication, Recognition Interval (s), Max. Authentication Failed Attempts Alarm/Alarm of Max. Failed Attempts, Enable Tampering Detection, Communication with Controller Every (s) and Max. Interval When Entering Password (s). Card Reader Type Get card reader type. Card Reader Description Get card reader description. It is read-only. Enable Card Reader Enable the card reader's function. Authentication Select an authentication mode according to your actual needs from the drop-down list. Recognition Interval If the interval between card presenting of the same card is less than the configured value, the card presenting is invalid. The interval time range is from 0 to 255 seconds (When set to 0, it means that recognition interval is not enabled, and the same authentication can be used for unlimited times). Authentication Interval You can set the authentication interval of the same person when authenticating. The same person can only authenticate once in the configured interval. A second authentication will be failed. Max. Authentication Failed Attempts Alarm/Alarm of Max. Failed Attempts Enable to report alarm when the card reading attempts reach the set value. Enable Tampering Detection Enable the anti-tamper detection for the card reader. Enable Card No. Reversing The read card No. will be in reverse sequence after enabling the function. 100 DS-K1T342 Series Face Recognition Terminal User Manual Communication with Controller Every (s) When the access control device cannot connect with the card reader for longer than the set time, the card reader will turn offline automatically. Max. Interval When Entering Password (s) When you entering the password on the card reader, if the interval between pressing two digits is longer than the set value, the digits you pressed before will be cleared automatically. Set Privacy Parameters Set the event storage type, picture upload and storage parameters, and the picture clearing parameters. Tap Configuration General Settings Privacy . Figure 8-6 Privacy Settings Event Storage Settings Select a method to delete the event. You can select from Delete Old Events Periodically, Delete Old Events by Specified Time, or Overwriting. Delete Old Events Periodically Enter number to set the period for event deleting. All events will be deleted according to the configured time duration. 101 DS-K1T342 Series Face Recognition Terminal User Manual Delete Old Events by Specified Time Set a time and all events will be deleted on the configured time. Overwriting The earliest 5% events will be deleted when the system detects the stored events has been over 95% of the full space. Authentication Settings Display Authentication Result Check Face Picture, Name, or Employee ID. When authentication is completed, the system will display the selected contents in the result. Name De-identification The name information is desensitized with an asterisk. ID De-identification The ID information is desensitized with an asterisk. Picture Uploading and Storage You can upload and store pictures. Upload Captured Picture When Authenticating Upload the pictures captured when authenticating to the platform automatically. Save Captured Picture When Authenticating If you enable this function, you can save the picture when authenticating to the device. Save Registered Picture The registered face picture will be saved to the system if you enable the function. Upload Picture After Linked Capture Upload the pictures captured by linked camera to the platform automatically. Save Pictures After Linked Capture If you enable this function, you can save the picture captured by linked camera to the device. Clear All Pictures in Device You can clear registered face pictures and captured pictures in device. Clear Registered Face Pictures Select Face Picture, and tap Clear. All registered pictures in the device will be deleted. Clear Authentication/Captured Picture Select Authentication/Captured Picture, and tap Clear. All authentication/captured pictures in the device will be deleted. 102 DS-K1T342 Series Face Recognition Terminal User Manual Set Card Security Tap Configuration General Settings Card Security to enter the settings page. Set the parameters and click Save. Enable NFC Card Figure 8-7 Card Security In order to prevent the mobile phone from getting the data of the access control, you can enable NFC card to increase the security level of the data. Enable M1 Card Enable M1 card and authenticateing by presenting M1 card is available. M1 Card Encryption M1 card encryption can improve the security level of authentication. Sector Enable the function and set the encryption sector. By default, Sector 13 is encrypted. It is recommended to encrypt sector 13. Enable EM Card 103 DS-K1T342 Series Face Recognition Terminal User Manual Enable EM card and authenticating by presenting EM card is available. Note If the peripheral card reader supports presenting EM card, the function is also supported to enable/disable the EM card function. Enable CPU Card The device can read the data from CPU card when enabling the CPU card function. CPU Card Read Content After enable the CPU card content reading function, the device can read the CPU card content. Enable ID Card Enable ID card and authenticating by presenting ID card is available. Set Card Authentication Parameters Set the card reading content when authenticate via card on the device. Tap Configuration General Settings Card Authentication Settings . Figure 8-8 Card Authentication Page Select a card authentication mode and tap Save. Full Card No. All card No. will be read. Wiegand 26 (3 bytes) The device will read card via Wiegand 26 protocol (read 3 bytes). Wiegand 34 (4 bytes) The device will read card via Wiegand 34 protocol (read 4 bytes). 8.4.6 Face Parameters Settings Set face parameters. 104 DS-K1T342 Series Face Recognition Terminal User Manual Face Parameters Settings Tap Configuration Smart Intelligent Parameter . Figure 8-9 Face Parameters Note The functions vary according to different models. Refers to the actual device for details. Set Face Parameters. Face Anti-spoofing Enable or disable the live face detection function. If enabling the function, the device can recognize whether the person is a live one or not. Live Face Detection Security Level After enabling the face anti-spoofing function, you can set the matching security level when performing live face authentication. Recognition Distance Select the distance between the authenticating user and the device camera. Application Mode 105 DS-K1T342 Series Face Recognition Terminal User Manual Select Indoor or Others according to actual environment. In the outdoor scene, indoor scene near the window, or bad environment, you can choose Others. Note If the device is not activated by other tools, the device uses indoor as the environment mode by default. Face Recognition Mode Normal Mode The device uses a camera to perform face recognition. Deep Mode It is applicable for for more complex environments, and the range of people recognized is wider. Note The two modes cannot be compatible with each other. Do not change the mode once it is selected. If you change the mode, all face pictures of the previous mode will be cleared. In the deep mode, you can add the face pictures only via the user adding function of the device or the enrollment station. It is not supported to add face pictures via pictures importing. The device uses a camera to perform face recognition. Continuous Face Recognition Interval (s) Set the time interval between two continuous face recognitions when authenticating. Note Value Range: 1 to 10. 1:1 Matching Threshold Set the matching threshold when authenticating via 1:1 matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. 1:N Matching Threshold Set the matching threshold when authenticating via 1:N matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. The maximum value is 100. Face Recognition Timeout Value (s) Configure the timeout period for face recognition. If the face recognition time exceeds the configured value, the device will prompt the face recognition timeout. Face with Mask Detection 106 DS-K1T342 Series Face Recognition Terminal User Manual After enabling the face with mask detection, the system will recognize the captured face with mask picture. You can set face with mask1:N matching threshold, its ECO mode, and the strategy. None If the person do not wear a face mask when authenticating, the device will not prompt a notification. Reminder of Wearing If the person do not wear a face mask when authenticating, the device prompts a notification and the door will open. Must Wear If the person do not wear a face mask when authenticating, the device prompts a notification and the door keeps closed. Face with Mask & Face (1:1) Set the matching value when authenticating with face mask via 1:1 matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. Face with Mask 1:N Matching Threshold Set the matching threshold when authenticating with face mask via 1:N matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. Face with Mask & Face (1:1 ECO) Set the matching value when authenticating with face mask via ECO mode 1:1 matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. Face with Mask 1:N Matching Threshold (ECO Mode) Set the matching threshold when authenticating with face mask via ECO mode 1:N matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. ECO Mode After enabling the ECO mode, the device will use the IR camera to authenticate faces in the low light or dark environment. And you can set the ECO mode threshold, ECO mode (1:1 Matching Threshold), and ECO mode (1:N Matching Threshold). ECO Mode Threshold Set the matching threshold when authenticating via ECO mode 1:1 matching mode and ECO mode 1:N matching mode. 1:1 Matching Threshold Set the matching threshold when authenticating via ECO mode 1:1 matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. 1:N Matching Threshold 107 DS-K1T342 Series Face Recognition Terminal User Manual Set the matching threshold when authenticating via ECO mode 1:N matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. The maximum value is 100. Set Recognition Area Tap Configuration Smart Area Configuration to enter the page. Drag the blue frame in the live video to adjust the recognition area. Only the face within the area can be recognized by the system. Drag the slider to configure the effective area of face recognition. Tap Save to save the settings. 8.4.7 Video Intercom Settings Set Device ID The device can be used as a door station, outer door station, or access control device. You should set the device ID before usage. Device ID Settings Tap Configuration Intercom Device ID Settings . If you set the device type as Door Station or Access Control Device, you can set the floor No. and door station No. Tap Save to save the settings after the configuration. Figure 8-10 Device ID Settings (Door Station) Device Type The device can be used as a door station, outer door station, or access control device. Select a device type from the drop-down list. 108 DS-K1T342 Series Face Recognition Terminal User Manual Note If you change the device type, you should reboot the device. Floor No. Set the device installed floor No. Door Station No. Set the device installed floor No. Note If you change the No., you should reboot the device. If you set the device type as Outer Door Station, you can set the outer door station No. Figure 8-11 Device ID Settings (Outer Door Station) Outer Door Station No. If you select outer door station as the device type, you should enter a number between 1 and 99. Note If you change the No., you should reboot the device. Configure SIP Parameters Set the device's IP address and the SIP server's IP address. After setting the parameters, you can communicate among the access control device, door station, indoor station, main station, and the platform. 109 DS-K1T342 Series Face Recognition Terminal User Manual Note Only the access control device and other devices or systems (such as door station, indoor station, main station, platform) are in the same IP segment, the two-way audio can be performed. Tap Configuration Intercom Linked Network Settings . Figure 8-12 Linked Network Settings Set the video intercom server IP and main station's IP. Tap Save. Press Button to Call Steps 1. Tap Configuration Intercom Press Button to Call to enter the settings page. 2. Set the button to call.

- Check Call Indoor Station and set the indoor station No to set the button to call indoor station.

- Check Call Management Center to set the button to call management center. 8.4.8 Access Control Settings Set Door Parameters Tap Configuration Access Control Door Parameters . 110 DS-K1T342 Series Face Recognition Terminal User Manual Figure 8-13 Door Parameters Settings Page 111 DS-K1T342 Series Face Recognition Terminal User Manual Click Save to save the settings after the configuration. Door No. Select the device corresponded door No. Name You can create a name for the door. Open Duration Set the door unlocking duration. If the door is not opened for the set time, the door will be locked. Door Open Timeout Alarm An alarm will be triggered if the door has not been closed within the configured time duration. Door Contact You can set the door contact as Remain Open or Remain Closed according to your actual needs. By default, it is Remain Closed. Exit Button Type You can set the exit button as Remain Open or Remain Closed according to your actual needs. By default, it is Remain Open. Door Lock Powering Off Status You can set the door lock status when the door lock is powering off. By default, it is Remain Closed. Extended Open Duration The door contact can be enabled with appropriate delay after person with extended access needs swipes her/his card. Door Remain Open Duration with First Person Set the door open duration when first person is in. After the first person is authorized, it allows multiple persons access the door or other authentication actions. Duress Code The door can open by inputting the duress code when there is duress. At the same time, the client can report the duress event. Super Password The specific person can open the door by inputting the super password. Note The duress code and the super code should be different. And the digit ranges from 4 to 8. Set RS-485 Parameters You can set the RS-485 parameters including the peripheral, address, baud rate, etc. 112 DS-K1T342 Series Face Recognition Terminal User Manual Tap Configuration Access Control RS-485 . Tap Save to save the settings after the configuration. Peripheral Type Figure 8-14 RS-485 Page Select a peripheral from the drop-down list according the actual situation. You can select from Card Reader, Extension Module, or Access Controller. Note After the peripheral is changed and saved, the device will reboot automatically. RS-485 Address Set the RS-485 Address according to your actual needs. 113 DS-K1T342 Series Face Recognition Terminal User Manual Note If you select Access Controller: If connect the device to a terminal via the RS-485 interface, set the RS-485 address as 2. If you connect the device to a controller, set the RS-485 address according to the door No. Baud Rate The baud rate when the devices are communicating via the RS-485 protocol. Data Bit The data bit when the devices are communicating via the RS-485 protocol. Stop Bit The stop bit when the devices are communicating via the RS-485 protocol. Parity/Flow Ctrl/Communication Mode Enabled by default. Set Wiegand Parameters You can set the Wiegand transmission direction. Steps 1. Tap Configuration Access Control Wiegand Settings . Figure 8-15 Wiegand Page 2. Enable Wiegand to enable the Wiegand function. 3. Set a transmission direction. Input The device can connect a Wiegand card reader. Output 114 DS-K1T342 Series Face Recognition Terminal User Manual The can connect an external access controller. And the two devices will transmit the card No. via Wiegand 26 or 34. 4. Click Save to save the settings. Note If you change the peripheral, and after you save the device parameters, the device will reboot automatically. 115 DS-K1T342 Series Face Recognition Terminal User Manual Chapter 9 Operation via Web Browser 9.1 Login You can login via the web browser or the remote configuration of the client software. Note Make sure the device is activated. For detailed information about activation, see Activation . Login via Web Browser Enter the device IP address in the address bar of the web browser and press Enter to enter the login page. Note Make sure that the IP address starts with "Https:". Enter the device user name and the password. Click Login. Login via Remote Configuration of Client Software Download and open the client software. After adding the device, click page. to enter the Configuration 9.2 Live View You can view the live video of the device. After logging in, you will enter the live view page. You can perform the live view, capture, video recording, and other operations. 116 DS-K1T342 Series Face Recognition Terminal User Manual Function Descriptions:

Figure 9-1 Live View Page Select the image size when starting live view. Set the volume when starting live view. Note If you adjust the volume when starting two-way audio, you may hear a repeated sounds. You can capture image when starting live view. Reserved function. You can zoom in the live view image. Start or stop live view. Start or stop video recording. Select the streaming type when starting live view. You can select from the main stream and the sub stream. 117 DS-K1T342 Series Face Recognition Terminal User Manual Full screen view. 9.3 Person Management Click and add the person's information, including the basic information, authentication mode, card and fingerprint. And you can also edit user information, view user picture and search user information in the user list. Click OK to save the person. Add Basic Information Click User Add to enter the Add Person page. Add the person's basic information, including the employee ID, the person's name, the gender, user level, floor No., and room No. Click OK to save the settings. Add Card Click User Add to enter the Add Person page. Click Add Card, enter the Card No. and select the Property, and click OK to add the card. Click OK to save the settings. Add Fingerprint Click User Add to enter the Add Person page. Click Add Fingerprint, and press your finger on the fingerprint module of the device to add your fingerprint. Click Complete to save the settings. Add Face Picture Click User Add to enter the Add Person page. Click + on the right to upload a face picture from the local PC. Note The picture format should be JPG or JPEG or PNG, and the size should be less than 200 K. Click OK to save the settings. Set Permission Time Click User Add to enter the Add Person page. Set Start Time and End Time. Click OK to save the settings. Set Access Control Click User Add to enter the Add Person page. 118 DS-K1T342 Series Face Recognition Terminal User Manual After check Administrator in Access Control, the added person can log in by authenticating face. You can click Add to enter the Floor No. and Room No. of access control, and click to delete it. Click OK to save the settings. Add Authentication Mode Click User Add to enter the Add Person page. Set the authentication type. Click OK to save the settings. 9.4 Search Event Click Search to enter the Search page. Figure 9-2 Search Page Enter the search conditions, including the employee ID, the name, the card No., the start time, and the end time, and click Search. The results will be displayed on the right panel. 9.5 Configuration 9.5.1 Set Local Parameters Set the live view parameters, record file saving path, and captured pictures saving path. 119 DS-K1T342 Series Face Recognition Terminal User Manual Set Live View Parameters Click Configuration Local to enter the Local page. Configure the stream type, the play performance, auto start live view, and the image format and click Save. Set Record File Saving Path Click Configuration Local to enter the Local page. Select a record file size and select a saving path from your local computer and click Save. You can also click Open to open the file folder to view details. Set Captured Pictures Saving Path Click Configuration Local to enter the Local page. Select a saving path from your local computer and click Save. You can also click Open to open the file folder to view details. 9.5.2 View Device Information View the device name, language, model, serial No., QR code, version, number of channels, IO input, IO output, lock, RS-485 and alarm output, device capacity, etc. Click Configuration System System Settings Basic Information to enter the configuration page. You can view the device name, language, model, serial No., QR code, version, number of channels, IO input, IO output, lock, RS-485 and alarm output, device capacity, etc. 9.5.3 Set Time Set the device's time zone, synchronization mode, and the device time. Click Configuration System System Settings Time Settings . 120 DS-K1T342 Series Face Recognition Terminal User Manual Figure 9-3 Time Settings Click Save to save the settings after the configuration. Time Zone Select the device located time zone from the drop-down list. Time Sync. NTP You should set the NTP server's IP address, port No., and interval. Manual By default, the device time should be synchronized manually. You can set the device time manually or check Sync. with Computer Time to synchronize the device time with the computer's time. 9.5.4 Set DST Steps 1. Click Configuration System System Settings DST . 2. Check Enable DST. 3. Set the DST start time, end time and bias time. Figure 9-4 DST Page 121 DS-K1T342 Series Face Recognition Terminal User Manual 4. Click Save to save the settings. 9.5.5 View Open Source Software License Go to Configuration System System Settings About , and click View Licenses to view the device license. 9.5.6 Upgrade and Maintenance Reboot device, restore device parameters, and upgrade device version. Reboot Device Click Configuration System Maintenance Upgrade & Maintenance . Click Reboot to start reboot the device. Figure 9-5 Upgrade and Maintenance Page Restore Parameters Click Configuration System Maintenance Upgrade & Maintenance . Restore All All parameters will be restored to the factory settings. You should activate the device before usage. 122 DS-K1T342 Series Face Recognition Terminal User Manual Default The device will restore to the default settings, except for the device IP address and the user information. Unlink APP Account Unlink the Hik-Connect account from the platform. Import and Export Parameters Click Configuration System Maintenance Upgrade & Maintenance . Export Click Export to export the logs or device parameters. Note You can import the exported device parameters to another device. Import Click and select the file to import. Click Import to start import configuration file. Upgrade Click Configuration System Maintenance Upgrade & Maintenance . Select an upgrade type from the drop-down list. Click local PC. Click Upgrade to start upgrading. and select the upgrade file from your Note Do not power off during the upgrading. 9.5.7 Log Query You can search and view the device logs. Go to Configuration System Maintenance Log Query . Set the major and minor type of the log type. Set the start time and end time for searching, and click Search. The results will be displayed below, which including the No., time, the major type the minor type, the channel No., the local/remote user information, the remote host IP, etc. 9.5.8 Security Mode Settings Set the security mode for logging in the client software. On the Device for Management page, click Configuration System Security Security Service . 123 DS-K1T342 Series Face Recognition Terminal User Manual Select a security mode from the drop-down list, and click Save. Security Mode High security level for user information verification when logging in the client software. Compatible Mode The user information verification is compatible with the old client software version when logging in. Enable SSH To raise network security, disable SSH service. The configuration is only used to debug the device for the professionals. Enable HTTP In order to increase the network security level when visiting websites, you can enable HTTP to acquire a more secure and encrypted network communication environment. The communication should authenticated by identity and encryption password after enabling HTTP, which is save. 9.5.9 Certificate Management It helps to manage the server/client certificates and CA certificate. Note The function is only supported by certain device models. Create and Install Self-signed Certificate Steps 1. Go to Configuration System Security Certificate Management . 2. In the Certificate Files area, select a Certificate Type from the drop-down list. 3. Click Create. 4. Input certificate information. 5. Click OK to save and install the certificate. The created certificate is displayed in the Certificate Details area. The certificate will be saved automatically. 6. Download the certificate and save it to an asking file in the local computer. 7. Send the asking file to a certification authority for signature. 8. Import the signed certificate. 1) Select a certificate type in the Import Passwords area, and select a certificate from the local, and click Install. 2) Select a certificate type in the Import Communication Certificate area, and select a certificate from the local, and click Install. 124 DS-K1T342 Series Face Recognition Terminal User Manual Install Other Authorized Certificate If you already has an authorized certificate (not created by the device), you can import it to the device directly. Steps 1. Go to Configuration System Security Certificate Management . 2. In the Import Passwords and Import Communication Certificate areas, select certificate type and upload certificate. 3. Click Install. Install CA Certificate Before You Start Prepare a CA certificate in advance. Steps 1. Go to Configuration System Security Certificate Management . 2. Create an ID in the Inport CA Certificate area. Note The input certificate ID cannot be the same as the existing ones. 3. Upload a certificate file from the local. 4. Click Install. 9.5.10 Change Administrator's Password

. Steps 1. Click Configuration User Management . 2. Click 3. Enter the old password and create a new password. 4. Confirm the new password. 5. Click OK. Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product. 125 DS-K1T342 Series Face Recognition Terminal User Manual Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user. 9.5.11 View Device Arming/Disarming Information View device arming type and arming IP address. Go to Configuration Arming/Disarming Information . You can view the device arming/disarming information. Click Refresh to refresh the page. 9.5.12 Network Settings Set TCP/IP, port, Wi-Fi parameters, report strategy, platform access and HTTP listening. Note Some device models do not support Wi-Fi settings. Refer to the actual products when configuration. Set Basic Network Parameters Click Configuration Network Basic Settings TCP/IP . Set the parameters and click Save to save the settings. DHCP If uncheck the function, you should set the IPv4 address, IPv4 subnet mask, IPv4 default gateway, MTU, and the device port. If you check the function, the system will allocate the IPv4 address, IPv4 subnet mask, and the IPv4 default gateway automatically. NIC Type Select a NIC type from the drop-down list. By default, it is Auto. DNS Server Set the preferred DNS server and the Alternate DNS server according to your actual need. Set Port Parameters Set the HTTP, RTSP, HTTPS and Server port parmaeters. Click Configuration Network Basic Settings Port . HTTP It refers to the port through which the browser accesses the device. For example, when the HTTP Port is modified to 81, you need to enter http://192.0.0.65:81 in the browser for login. 126 DS-K1T342 Series Face Recognition Terminal User Manual RTSP It refers to the port of real-time streaming protocol. HTTPS Set the HTTPS for accessing the browser. Certificate is required when accessing. Server It refers to the port through which the client adds the device. Set Wi-Fi Parameters Set the Wi-Fi parameters for device wireless connection. Steps Note The function should be supported by the device. 1. Click Configuration Network Basic Settings Wi-Fi . 2. Check Wi-Fi. 3. Select a Wi-Fi Figure 9-6 Wi-Fi Settings Page

- Click

- Click Add, and enter the SSID, working mode, and encryption type. Click Connect. When the of a Wi-Fi in the list and enter the Wi-Fi password. Wi-Fi is connected, click OK. 4. Optional: Set the WLAN parameters. 1) Click Network Settings. 127 DS-K1T342 Series Face Recognition Terminal User Manual 2) Set the IP address, subnet mask, and default gateway. Or check Enable DHCP and the system will allocate the IP address, subnet mask, and default gateway automatically. 5. Click OK. Report Strategy Settings You can set the center group for uploading the log via the ISUP protocol. Go to Configuration Network Basic Settings Report Strategy . You can set the center group and the system will transfer logs via ISUP protocol. Click Save to save the settings. Center Group Select a center group from the drop-down list. Main Channel The device will communicate with the center via the main channel. Note N1 refers to wired network. Platform Access Platform access provides you an option to manage the devices via platform. Steps 1. Click Configuration Network Advanced Platform Access to enter the settings page. 2. Select the Platform Access Mode. Note Hik-Connect is an application for mobile devices. With the App, you can view live image of the device, receive alarm notification and so on. 3. Check the checkbox of Enable to enable the function. 4. Optional: Check the checkbox of Custom, and you can set the server address by yourself. 5. Create a Stream Encryption/Encryption Key for the device. Note 6 to 12 letters (a to z, A to Z) or numbers (0 to 9), case sensitive. You are recommended to use a combination of no less than 8 letters or numbers. 6. Click Save to enable the settings. 128 DS-K1T342 Series Face Recognition Terminal User Manual Set ISUP Parameters Set the ISUP parameters for accessing device via ISUP protocol. Steps Note The function should be supported by the device. 1. Click Configuration Network Advanced Settings Platform . 2. Select ISUP from the platform access mode drop-down list. 3. Check Enable. 4. Set the ISUP version, and view the alarm receiver type, server address, port, device ID, register status. Note If you select 5.0 as the version, you should set the ISUP key as well. 5. Set the ISUP listening parameters, including ISUP alarm center IP address/domain name, ISUP alarm center URL, and ISUP alarm center port. 6. Click Save. Configure HTTP Listening The device can send alarm information to the event alarm IP address or domain name via HTTP protocol/HTTPS protocol. Before You Start The event alarm IP address or domain name should support the HTTP protocol/HTTPS protocol to receive the alarm information. Note The function should be supported by the device. Steps 1. Click Configuration Network Advanced HTTP Listening . 2. Edit the event alarm IP address or domain name, URL, port, and protocol. 3. Optional: Click Default to reset the event alarm IP address or domain name. 4. Click Save. 9.5.13 Set Video and Audio Parameters Set the image quality, resolution, and the device volume. 129 DS-K1T342 Series Face Recognition Terminal User Manual Set Video Parameters Click Configuration Video/Audio Video . Figure 9-7 Video Settings Page Set the stream type, the video type, the bitrate type, the frame rate, the Max. bitrate, and the video encoding. Click Save to save the settings after the configuration. Set Audio Parameters Click Configuration Video/Audio Audio . Set the audio stream type and audio encoding. Drag the slider to adjust the device input and output volume. You can also enable voice prompt. Click Save to save the settings after the configuration. Note The functions vary according to different models. Refers to the actual device for details. 130 DS-K1T342 Series Face Recognition Terminal User Manual 9.5.14 Customize Audio Content Customize the output audio content when authentication succeeded and failed. Steps 1. Click Configuration Video/Audio Prompt . Figure 9-8 Customize Audio Content 2. Select Prompt as TTS(Text to Speech) to turn the text to audio content. 3. Or you can select Prompt as Custom Prompt Importing. 1) Select Custom Type or you can import your custom prompt from local PC. 2) You can view the importing status of the custom prompts in the list. Note The audio file shall be in WAV format and mono, and the sampling rate shall be 8 K or 16 K. The amplitude of the audio file shall not exceed -3dB, and the size of the audio file size shall not exceed 512 K. 4. Select time schedule. 5. Enable the function. 6. Set the appellation. 7. Set the time period when authentication succeeded. 1) Click Add. 2) Set the time duration and the language. 131 DS-K1T342 Series Face Recognition Terminal User Manual Note If authentication is succeeded in the configured time duration, the device will broadcast the configured content. 3) Enter the audio content. 4) Optional: Repeat substep 1 to 3. 5) Optional: Click to delete the configured time duration. 8. Set the time duration when authentication failed. 1) Click Add. 2) Set the time duration and the language. Note If authentication is failed in the configured time duration, the device will broadcast the configured content. 3) Enter the audio content. 4) Optional: Repeat substep 1 to 3. 5) Optional: Click to delete the configured time duration. 9. Optional: Add holiday schedule. 1) Click Add to add holiday schedule. 2) Repeat step 3 to 6. 10. Click Save to save the settings. 9.5.15 Set Image Parameters Set the video standard, WDR, brightness, contrast, and saturation. Steps 1. Click Configuration Image Adjustment . 2. Configure the parameters to adjust the image. Video Standard Set the video frame rate when performing live view remotely. After changing the standard, you should reboot the device to take effect. PAL 25 frames per second. Suitable for mainland China, Hong Kong (China), the Middle East countries, Europe countries, etc. NTSC 30 frames per second. Suitable for the USA, Canada, Japan, Taiwan (China), Korea, the Philippines, etc. WDR Enable or disable the WDR function. 132 DS-K1T342 Series Face Recognition Terminal User Manual When there are both very bright and very dark areas simultaneously in the view, WDR balances the brightness level of the whole image and provide clear images with details. Brightness/Contrast/Saturation Drag the block or enter the value to adjust the live video's brightness, contrast and saturation. Start/end recording video. Capture the image. 3. Click Default to restore the parameters to the default settings. 9.5.16 Set Supplement Light Brightness Set the device supplement light brightness. Steps 1. Click Configuration Image Supplement Light Parameters . Figure 9-9 Supplement Light Settings Page 2. Select a supplement light type and mode from the drop-down list. If you select the mode as ON, you should set the brightness. 133 DS-K1T342 Series Face Recognition Terminal User Manual 9.5.17 Time and Attendance Settings If you want to track and monitor when the persons start/stop work and monitor their working hours and late arrivals, early departures, time taken on breaks, and absenteeism, you can add the person to the shift group and assign a shift schedule (a rule for the attendance defining how the schedule repeats, the shift type, break settings, and the card swiping rule.) to the shift group to define the attendance parameters for the persons in the shift group. Disable Attendance Mode via Web Disable the attendance mode and the system will not display the attendance status on the initial page. Steps 1. Click Configuration Attendance to enter the settings page. 2. Set the Attendance Mode as Disable. Result You will not view or configure the attendance status on the initial page. And the system will follow the attendance rule that configured on the platform. Time Settings Steps 1. Click Configuration Time Settings to enter the settings page. 2. Select Status Type. 3. Optional: Edit Schedule Name according to the actual needs. 4. Drag mouse to set the schedule. Note Set the schedule from Monday to Sunday according to the actual needs. 5. Optional: Select a timeline and click Delete. Or click Delete All to clear the settings. 6. Click Save. Set Manual Attendance via Web Set the attendance mode as manual, and you should select a status manually when you take attendance. Before You Start Add at least one user, and set the user's authentication mode. For details, see User Management. 134 DS-K1T342 Series Face Recognition Terminal User Manual Steps 1. Click Configuration Attendance to enter the settings page. 2. Set the Attendance Mode as Manual. 3. Enable the Attendance Status Required and set the attendace status lasts duration. 4. Enable a group of attendance status. Note The Attendance Property will not be changed. 5. Optional: Select an status and change its name if required. Result You should select an attendance status manually after authentication. Note If you do not select a status, the authentication will be failed and it will not be marked as a valid attendance. Set Auto Attendance via Web Set the attendance mode as auto, and you can set the attendance status and its available schedule. The system will automatically change the attendance status according to the configured schedule. Before You Start Add at least one user, and set the user's authentication mode. For details, see User Management. Steps 1. Click Configuration Attendance to enter the settings page. 2. Set the Attendance Mode as Auto. 3. Enable the Attendance Status function. 4. Enable a group of attendance status. Note The Attendance Property will not be changed. 5. Optional: Select an status and change its name if required. 6. Set the status' schedule. Refers to Time Settings for details. Set Manual and Auto Attendance via Web Set the attendance mode as Manual and Auto, and the system will automatically change the attendance status according to the configured schedule. At the same time you can manually change the attendance status after the authentication. 135 DS-K1T342 Series Face Recognition Terminal User Manual Before You Start Add at least one user, and set the user's authentication mode. For details, see User Management. Steps 1. Click Configuration Attendance to enter the settings page. 2. Set the Attendance Mode as Manual and Auto. 3. Enable the Attendance Status function. 4. Enable a group of attendance status. Note The Attendance Property will not be changed. 5. Optional: Select an status and change its name if required. 6. Set the status' schedule. Refers to Time Settings for details. Result On the initial page and authenticate. The authentication will be marked as the configured attendance status according to the schedule. If you tap the edit icon on the result tab, you can select a status to take attendance manually, the authentication will be marked as the edited attendance status. Example If set the Break Out as Monday 11:00, and Break In as Monday 12:00, the valid user's authentication from Monday 11:00 to 12:00 will be marked as break. 9.5.18 General Settings Set Authentication Parameters Click Configuration General Authentication Settings . Note The functions vary according to different models. Refers to the actual device for details. 136 DS-K1T342 Series Face Recognition Terminal User Manual Figure 9-10 Set Authentication Parameters Click Save to save the settings after the configuration. Device Type Select Main Card Reader or Sub Card Reader from the drop-down list. Main Card Reader You can configure the device card reader's parameters. Sub Card Reader You can configure the connected peripheral card reader's parameters. If select Main Card Reader:

Card Reader Type/Card Reader Description Get card reader type and description. They are read-only. 137 DS-K1T342 Series Face Recognition Terminal User Manual Enable Card Reader Enable the card reader's function. Authentication Select an authentication mode according to your actual needs from the drop-down list. Recognition Interval You can set the interval between 2 continuous recognition of a same person during the authentication. In the configured interval, Person A can only recognized once. If another person

(Person B) has recognized during the interval, Person A can recognized again. Authentication Interval You can set the authentication interval of the same person when authenticating. The same person can only authenticate once in the configured interval. A second authentication will be failed. Alarm of Max. Failed Attempts Enable to report alarm when the card reading attempts reach the set value. Max. Authentication Failed Attempts Enable to report alarm when the card reading attempts reach the set value. Enable Tampering Detection Enable the anti-tamper detection for the card reader. Enable Card No. Reversing The read card No. will be in reverse sequence after enabling the function. If select Sub Card Reader:

Card Reader Type/Card Reader Description Get card reader type and description. They are read-only. Enable Card Reader Enable the card reader's function. Authentication Select an authentication mode according to your actual needs from the drop-down list. Recognition Interval If the interval between card presenting of the same card is less than the configured value, the card presenting is invalid. Authentication Interval You can set the authentication interval of the same person when authenticating. The same person can only authenticate once in the configured interval. A second authentication will be failed. Alarm of Max. Failed Attempts Enable to report alarm when the card reading attempts reach the set value. 138 DS-K1T342 Series Face Recognition Terminal User Manual Max. Authentication Failed Attempts Enable to report alarm when the card reading attempts reach the set value. Communication with Controller Every When the access control device cannot connect with the card reader for longer than the set time, the card reader will turn offline automatically. Max. Interval When Entering Password When you entering the password on the card reader, if the interval between pressing two digits is longer than the set value, the digits you pressed before will be cleared automatically. OK LED Polarity/Error LED Polarity Set OK LED Polarity/Error LED Polarity of the access control device according to the card reader parameters. Generally, adopts the default settings. Enable Tampering Detection Enable the anti-tamper detection for the card reader. Set Privacy Parameters Set the event storage type, picture upload and storage parameters, and the picture clearing parameters. Go to Configuration General Privacy Event Storage Settings Select a method to delete the event. You can select from Delete Old Events Periodically, Delete Old Events by Specified Time, or Overwriting. Delete Old Events Periodically Drag the block or enter number to set the period for event deleting. All events will be deleted according to the configured time duration. Delete Old Events by Specified Time Set a time and all events will be deleted on the configured time. Overwriting The earliest 5% events will be deleted when the system detects the stored events has been over 95% of the full space. Authentication Settings Display Authentication Result You can check Face Picture, Name, and Employee ID, to display the authentication result. Name De-identification You can check Name De-identification, and the whole name will not be displayed. 139 DS-K1T342 Series Face Recognition Terminal User Manual ID De-identification You can check ID De-identification, and the ID will not be displayed. Picture Uploading and Storage Upload Captured Picture When Authenticating Upload the pictures captured when authenticating to the platform automatically. Save Captured Picture When Authenticating If you enable this function, you can save the picture when authenticating to the device. Save Registered Picture The registered face picture will be saved to the system if you enable the function. Upload Picture After Linked Capture Upload the pictures captured by linked camera to the platform automatically. Save Pictures After Linked Capture If you enable this function, you can save the picture captured by linked camera to the device. Clear All Pictures in Device Note All pictures cannot be restored once they are deleted. Clear Registered Face Pictures All registered pictures in the device will be deleted. Clear Captured Pictures All captured pictures in the device will be deleted. Set Face Recognition Parameters You can set face recognition parameters for accessing. Click Configuration General Face Recognition Parameters . You can set Working Mode as Access Control Mode. The access control mode is the device normal mode. You should authenticate your credential for accessing. Enable Blocklist Authentication. Click Save to save the settings after the configuration. Set Card Security Click Configuration General Card Security to enter the settings page. Set the parameters and click Save. 140 DS-K1T342 Series Face Recognition Terminal User Manual Enable NFC Card In order to prevent the mobile phone from getting the data of the access control, you can enable NFC card to increase the security level of the data. Enable M1 Card Enable M1 card and authenticateing by presenting M1 card is available. M1 Card Encryption Sector M1 card encryption can improve the security level of authentication. Enable the function and set the encryption sector. By default, Sector 13 is encrypted. It is recommended to encrypt sector 13. Enable EM Card Enable EM card and authenticating by presenting EM card is available. Note If the peripheral card reader supports presenting EM card, the function is also supported to enable/disable the EM card function. Enable DESFire Card The device can read the data from DESFire card when enabling the DESFire card function. DESFire Card Read Content After enable the DESFire card content reading function, the device can read the DESFire card content. Enable FeliCa Card The device can read the data from FeliCa card when enabling the FeliCa card function. Set Card Authentication Parameters Set the card reading content when authenticate via card on the device. Go to Configuration General Card Authentication Settings . Select a card authentication mode and click Save. Full Card No. All card No. will be read. Wiegand 26 (3 bytes) The device will read card via Wiegand 26 protocol (read 3 bytes). Wiegand 34 (4 bytes) The device will read card via Wiegand 34 protocol (read 4 bytes). 141 DS-K1T342 Series Face Recognition Terminal User Manual Configure Authentication Result Text Steps 1. Go to Configuration General Authentication Result Text . Figure 9-11 Authentication Result Text 2. Enable Customize Authentication Result Text. 3. Enter custom texts. 4. Click Save. 9.5.19 Video Intercom Settings Set Video Intercom Parameters The device can be used as a door station, outer door station, or access control device. You should set the device No. before usage. Click Configuration Intercom Device No. If set the device type as Door Station or Access Control Device, you can set the floor No., door station No., and click Advanced Settings to set Phase No., Building No., and Unit No. Click Save to save the settings after the configuration. Device Type The device can be used as a door station or outer door station. Select a device type from the drop-down list. Note If you change the device type, you should reboot the device. Floor No. Set the device installed floor No. 142 DS-K1T342 Series Face Recognition Terminal User Manual Door Station No. Set the device installed floor No. Note If you change the No., you should reboot the device. Phase No. Set the device phase No. Building No. Set the device building No. Unit No. Set the device unit No. Note If you change the No., you should reboot the device. If set the device type as Outer Door Station, you can set the period No., outer door station No., and community No. Outer Door Station No. If you select outer door station as the device type, you should enter a number between 1 and 99. Note If you change the No., you should reboot the device. Phase No. Set the device phase No. Configure SIP Parameters Set the device's IP address and the SIP server's IP address. After setting the parameters, you can communicate among the access control device, door station, indoor station, main station, and the platform. Note Only the access control device and other devices or systems (such as door station, indoor station, main station, platform) are in the same IP segment, the two-way audio can be performed. Go to Configuration Intercom Linked Network Settings . Set the main station's IP address and SIP server's IP address. Click Save. 143 DS-K1T342 Series Face Recognition Terminal User Manual Press Button to Call Steps 1. Click Configuration Intercom Press Button to Call . 2. Set the parameters.

- Edit call No. for every button.

- Check Call Management Center to set the button calling center. Note If you check Call Management Center and set the call No. as well, call management center has higher privilege than call No. 9.5.20 Access Control Settings Set Door Parameters Click Configuration Access Control Door Parameters . Figure 9-12 Door Parameters Settings Page Click Save to save the settings after the configuration. Door No. 144 DS-K1T342 Series Face Recognition Terminal User Manual Select the device corresponded door No. Name You can create a name for the door. Open Duration Set the door unlocking duration. If the door is not opened for the set time, the door will be locked. Door Open Timeout Alarm An alarm will be triggered if the door has not been closed within the configured time duration. Door Contact You can set the door contact as Remain Open or Remain Closed according to your actual needs. By default, it is Remain Closed. Exit Button Type You can set the exit button as Remain Open or Remain Closed according to your actual needs. By default, it is Remain Open. Door Lock Powering Off Status You can set the door lock status when the door lock is powering off. By default, it is Remain Closed. Extended Open Duration The door contact can be enabled with appropriate delay after person with extended access needs swipes her/his card. Door Remain Open Duration with First Person Set the door open duration when first person is in. After the first person is authorized, it allows multiple persons access the door or other authentication actions. Duress Code The door can open by inputting the duress code when there is duress. At the same time, the client can report the duress event. Super Password The specific person can open the door by inputting the super password. Note The duress code and the super code should be different. Set RS-485 Parameters You can set the RS-485 parameters including the peripheral, address, baud rate, etc. Click Configuration Access Control RS-485 Settings . Check Enable RS-485, and set the parameters. 145 DS-K1T342 Series Face Recognition Terminal User Manual Click Save to save the settings after the configuration. No. Set the RS-485 No. Peripheral Type Select a peripheral from the drop-down list according the actual situation. You can select from Card Reader, Extension Module, Access Controller, or Disable. Note After the peripheral is changed and saved, the device will reboot automatically. RS-485 Address Set the RS-485 Address according to your actual needs. Note If you select Access Controller: If connect the device to a terminal via the RS-485 interface, set the RS-485 address as 2. If you connect the device to a controller, set the RS-485 address according to the door No. Baud Rate The baud rate when the devices are communicating via the RS-485 protocol. Set Wiegand Parameters You can set the Wiegand transmission direction. Steps Note Some device models do not support this function. Refer to the actual products when configuration. 1. Click Configuration Access Control Wiegand Settings . 146 DS-K1T342 Series Face Recognition Terminal User Manual Figure 9-13 Wiegand 2. Check Wiegand to enable the Wiegand function. 3. Set a transmission direction. Output The can connect an external access controller. And the two devices will transmit the card No. via Wiegand 26 or 34. 4. Click Save to save the settings. Note If you change the peripheral, and after you save the device parameters, the device will reboot automatically. 9.5.21 Set Biometric Parameters Set Basic Parameters Click Configuration Smart Smart . 147 DS-K1T342 Series Face Recognition Terminal User Manual Figure 9-14 Set Face Parameters 148 DS-K1T342 Series Face Recognition Terminal User Manual Note The functions vary according to different models. Refers to the actual device for details. Click Save to save the settings after the configuration. Face Anti-spoofing Enable or disable the live face detection function. If enabling the function, the device can recognize whether the person is a live one or not. Note Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher security level, use multiple authentication modes. Live Face Detection Security Level After enabling the face anti-spoofing function, you can set the matching security level when performing live face authentication. Recognition Distance Select the distance between the authenticating user and the device camera. Application Mode Select either others or indoor according to actual environment. Face Recognition Mode Normal Mode Recognize face via the camera normally. Deep Mode In the deep mode, you can add the face pictures only via the user adding function of the device or the enrollment station. It is not supported to add face pictures via pictures importing. Note In the deep mode, you can add the face pictures only via the device or the enrollment station. It is not supported to add face pictures via pictures importing. Continuous Face Recognition Interval Set the time interval between two continuous face recognitions when authenticating. Pitch Angle The maximum pitch angle when starting face authentication. Yaw Angle The maximum yaw angle when starting face authentication. Face Grading Set the face grading according to your needs. 149 DS-K1T342 Series Face Recognition Terminal User Manual 1:1 Matching Threshold Set the matching threshold when authenticating via 1:1 matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. 1:N Matching Threshold Set the matching threshold when authenticating via 1:N matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. Face Recognition Timeout Value Set the timeout value when face recognizing. If the face recognition time is longer than the configured value, the system will pop up a prompt. Face with Mask Detection After enabling the face with mask detection, the system will recognize the captured face with mask picture. You can set face with mask1:N matching threshold, its ECO mode, and the strategy. None If the person do not wear a face mask when authenticating, the device will not prompt a notification. Reminder of Wearing If the person do not wear a face mask when authenticating, the device prompts a notification and the door will open. Must Wear If the person do not wear a face mask when authenticating, the device prompts a notification and the door keeps closed. Face with Mask & Face (1:1) Set the matching value when authenticating with face mask via 1:1 matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. Face with Mask 1:N Matching Threshold Set the matching threshold when authenticating with face mask via 1:N matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. ECO Mode After enabling the ECO mode, the device will use the IR camera to authenticate faces in the low light or dark environment. And you can set the ECO mode threshold, ECO mode (1:N), and ECO mode (1:1). ECO Mode Threshold Set the ECO mode's threshold. The larger the value, the easier the device entering the ECO mode. ECO Mode (1:1) 150 DS-K1T342 Series Face Recognition Terminal User Manual Set the matching threshold when authenticating via ECO mode 1:1 matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. ECO Mode (1:N) Set the matching threshold when authenticating via ECO mode 1:N matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate Face with Mask & Face (1:1 ECO) Set the matching value when authenticating with face mask via ECO mode 1:1 matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. Face with Mask 1:N Matching Threshold (ECO Mode) Set the matching threshold when authenticating with face mask via ECO mode 1:N matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. Fingerprint Security Level Select the fingerprint security level. The higher is the security level, the lower is the false acceptance rate (FAR). Set Recognition Area Click Configuration Smart Area Configuration . Drag the yellow frame in the live video to adjust the recognition area. Only the face within the area can be recognized by the system. Set Area Configuration, Margin (Left), Margin (Right), Margin (Top) and Margin (Bottom) as desired. Click Save to save the settings. Click to record videos or capture pictures. or 9.5.22 Set Notice Publication You can set the theme for the device. Click Configuration Theme Media Database , click + Add, and click Upload to upload the material to the media library. Click Configuration Theme Theme . 151 DS-K1T342 Series Face Recognition Terminal User Manual Display Mode Figure 9-15 Theme Page You can select display theme for device authentication. You can select Display Mode as Simple or Normal. When you select Simple, the information of name, ID, face picture will be not displayed. Sleep Enable Sleep and the device will enter the sleep mode when no operation within the configured sleep time. Theme Management You can click + Add Program in the frame and upload the screen saver pictures from the local PC. Note By now, there is only one theme can be added. Play Schedule 152 DS-K1T342 Series Face Recognition Terminal User Manual After you have created a theme, you can select the theme and draw a schedule on the time line to set the theme play schedule. Select the drawn schedule and you can edit the exact start and end time. Select the drawn schedule and you can click Delete or Delete All to delete the schedule. Slide Show Interval Drag the block or enter the number to set the slide show interval. The picture will be changed according to the interval. 153 DS-K1T342 Series Face Recognition Terminal User Manual Chapter 10 Client Software Configuration 10.1 Configuration Flow of Client Software Follow the flow diagram below to configure on the client software. Figure 10-1 Flow Diagram of Configuration on Client Software 10.2 Device Management The client supports managing access control devices and video intercom devices. 154 DS-K1T342 Series Face Recognition Terminal User Manual Example You can control entrance & exit and manage attendance after adding access control devices to the client; you can perform video intercom with the indoor stations and door stations. 10.2.1 Add Device The client provides three device adding modes including by IP/domain, IP segment, and EHome protocol. The client also supports importing multiple devices in a batch when there are large amount of devices to be added. Add Device by IP Address or Domain Name If you know the IP address or domain name of the device to add, you can add devices to the client by specifying the IP address (or domain name), user name, password, etc. Steps 1. Enter Device Management module. 2. Click Device tab on the top of the right panel. The added devices are displayed on the right panel. 3. Click Add to open the Add window, and then select IP/Domain as the adding mode. 4. Enter the required information. Name Create a descriptive name for the device. For example, you can use a nickname that can show the location or feature of the device. Address The IP address or domain name of the device. Port The devices to add share the same port number. The default value is 8000. User Name Enter the device user name. By default, the user name is admin. Password Enter the device password. Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend 155 DS-K1T342 Series Face Recognition Terminal User Manual you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product. Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user. 5. Optional: Check Transmission Encryption (TLS) to enable transmission encryption using TLS

(Transport Layer Security) protocol for security purpose. Note This function should be supported by the device. If you have enabled Certificate Verification, you should click Open Certificate Directory to open the default folder, and copy the certificate file exported from the device to this default directory to strengthen the security. See for details about enabling certificate verification. You can log into the device to get the certificate file by web browser. 6. Check Synchronize Time to synchronize the device time with the PC running the client after adding the device to the client. 7. Optional: Check Import to Group to create a group by the device name, and import all the channels of the device to this group. Example For access control device, its access points, alarm inputs/outputs, and encoding channels (if exist) will be imported to this group. 8. Finish adding the device.

- Click Add to add the device and back to the device list page.

- Click Add and New to save the settings and continue to add other device. Import Devices in a Batch You can add multiple devices to the client in a batch by entering the device parameters in a pre-

defined CSV file. Steps 1. Enter the Device Management module. 2. Click Device tab on the top of the right panel. 3. Click Add to open the Add window, and then select Batch Import as the adding mode. 4. Click Export Template and then save the pre-defined template (CSV file) on your PC. 5. Open the exported template file and enter the required information of the devices to be added on the corresponding column. Note For detailed description of the required fields, refer to the introductions in the template. Adding Mode Enter 0 or 1 or 2. 156 DS-K1T342 Series Face Recognition Terminal User Manual Address Edit the address of the device. Port Enter the device port number. The default port number is 8000. User Name Enter the device user name. By default, the user name is admin. Password Enter the device password. Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product. Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user. Import to Group Enter 1 to create a group by the device name. All the channels of the device will be imported to the corresponding group by default. Enter 0 to disable this function. and select the template file. 6. Click 7. Click Add to import the devices. 10.2.2 Reset Device Password If you forgot the password of the detected online devices, you can reset the device password via the client. Steps 1. Enter Device Management page. 2. Click Online Device to show the online device area. All the online devices sharing the same subnet will be displayed in the list. 3. Select the device from the list and click 4. Reset the device password. on the Operation column.

- Click Generate to pop up the QR Code window and click Download to save the QR code to your PC. You can also take a photo of the QR code to save it to your phone. Send the picture to our technical support. 157 DS-K1T342 Series Face Recognition Terminal User Manual Note For the following operations for resetting the password, contact our technical support. Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product. Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user. 10.2.3 Manage Added Devices After adding devices to device list, you can manage the added devices including editing device parameters, remote configuration, viewing device status, etc. Table 10-1 Manage Added Devices Edit Device Delete Device to edit device information including device name, address, user Click name, password, etc. Check one or more devices, and click Delete to delete the selected devices. Remote Configuration to set remote configuration of the corresponding device. For Click details, refer to the user manual of device. View Device Status Click to view device status, including door No., door status, etc. Note For different devices, you will view different information about device status. View Online User to view the details of online user who access the device, Click including user name, user type, IP address and login time. Refresh Device Information Click to refresh and get the latest device information. 158 DS-K1T342 Series Face Recognition Terminal User Manual 10.3 Group Management The client provides groups to manage the added resources in different groups. You can group the resources into different groups according to the resources' locations. Example For example, on the 1st floor, there mounted 16 doors, 64 alarm inputs, and 16 alarm outputs. You can organize these resources into one group (named 1st Floor) for convenient management. You can control door status, and do some other operations of the devices after managing the resources by groups. 10.3.1 Add Group You can add group to organize the added device for convenient management. Steps 1. Enter the Device Management module. 2. Click Device Management Group to enter the group management page. 3. Create a group.

- Click Add Group and enter a group name as you want.

- Click Create Group by Device Name and select an added device to create a new group by the name of the selected device. Note The resources (such as alarm inputs/outputs, access points, etc.) of this device will be imported to the group by default. 10.3.2 Import Resources to Group You can import the device resources (such as alarm inputs/outputs, access points, etc.) to the added group in a batch. Before You Start Add a group for managing devices. Refer to Add Group . Steps 1. Enter the Device Management module. 2. Click Device Management Group to enter the group management page. 3. Select a group from the group list and select the resource type as Access Point, Alarm Input, Alarm Output, etc. 4. Click Import. 5. Select the thumbnails/names of the resources in the thumbnail/list view. 159 DS-K1T342 Series Face Recognition Terminal User Manual Note You can click or to switch the resource display mode to thumbnail view or to list view. 6. Click Import to import the selected resources to the group. 10.4 Person Management You can add person information to the system for further operations such as access control, video intercom, time and attendance, etc. You can manage the added persons such as issuing cards to them in a batch, importing and exporting person information in a batch, etc. 10.4.1 Add Organization You can add an organization and import person information to the organization for effective management of the persons. You can also add a surbodinate organization for the added one. Steps 1. Enter Person module. 2. Select a parent organization in the left column and click Add in the upper-left corner to add an organization. 3. Create a name for the added organization. Note Up to 10 levels of organizations can be added. 4. Optional: Perform the following operation(s). Edit Organization Hover the mouse on an added organization and click to edit its name. Delete Organization Hover the mouse on an added organization and click to delete it. Note The lower-level organizations will be deleted as well if you delete an organization. Make sure there is no person added under the organization, or the organization cannot be deleted. Show Persons in Sub Organization Check Show Persons in Sub Organization and select an organization to show persons in its sub organizations. 10.4.2 Import and Export Person Identify Information You can import the information and pictures of multiple persons to the client software in a batch. Meanwhile, you can also export the person information and pictures and save them in your PC. 160 DS-K1T342 Series Face Recognition Terminal User Manual Import Person Information You can enter the information of multiple persons in a predefined template (CSV/Excel file) to import the information to the client in a batch. Steps 1. Enter the Person module. 2. Select an added organization in the list, or click Add in the upper-left corner to add an organization and then select it. 3. Click Import to open the Import panel. 4. Select Person Information as the importing mode. 5. Click Download Template for Importing Person to download the template. 6. Enter the person information in the downloaded template. Note If the person has multiple cards, separate the card No. with semicolon. Items with asterisk are required. By default, the Hire Date is the current date. 7. Click 8. Click Import to start importing. to select the CSV/Excel file with person information from local PC. Note If a person No. already exists in the client's database, delete the existing information before importing. You can import information of no more than 2,000 persons. Import Person Pictures After importing face pictures for the added persons to the client, the persons in the pictures can be identified by an added face recognition terminal. You can either import person pictures one by one, or import multiple pictures at a time according to your need. Before You Start Be sure to have imported person information to the client beforehand. Steps 1. Enter the Person module. 2. Select an added organization in the list, or click Add in the upper-left corner to add an organization and then select it. 3. Click Import to open the Import panel and check Face. 4. Optional: Enable Verify by Device to check whether face recognition device managed in the client can recognize the face in the photo. to select a face picture file. 5. Click 161 DS-K1T342 Series Face Recognition Terminal User Manual Note The (folder of) face pictures should be in ZIP format. Each picture file should be in JPG format and should be no larger than 200 KB. Each picture file should be named as "Person ID_Name". The Person ID should be the same with that of the imported person information. 6. Click Import to start importing. The importing progress and result will be displayed. Export Person Information You can export the added persons' information to local PC as a CSV/Excel file. Before You Start Make sure you have added persons to an organization. Steps 1. Enter the Person module. 2. Optional: Select an organization in the list. Note All persons' information will be exported if you do not select any organization. 3. Click Export to open the Export panel. 4. Check Person Information as the content to export. 5. Check desired items to export. 6. Click Export to save the exported file in CSV/Excel file on your PC. Export Person Pictures You can export face picture file of the added persons and save in your PC. Before You Start Make sure you have added persons and their face pictures to an organization. Steps 1. Enter the Person module. 2. Optional: Select an organization in the list. Note All persons' face pictures will be exported if you do not select any organization. 3. Click Export to open the Export panel and check Face as the content to export. 4. Click Export to start exporting. 162 DS-K1T342 Series Face Recognition Terminal User Manual Note The exported file is in ZIP format. The exported face picture is named as "Person ID_Name_0" ("0" is for a full-frontal face). 10.4.3 Get Person Information from Access Control Device If the added access control device has been configured with person information (including person details, fingerprint, and issued card information), you can get the person information from the device and import them to the client for further operations. Steps Note If the person name stored in the device is empty, the person name will be filled with the issued card No. after importing to the client. The gender of the persons will be Male by default. If the card number or person ID (employee ID) stored on the device already exists in the client database, the person with this card number or person ID will not be imported to the client. 1. Enter Person module. 2. Select an organization to import the persons. 3. Click Get from Device. 4. Select an added access control device or the enrollment station from the drop-down list. Note If you select the enrollment station, you should click Login, and set IP address, port No., user name and password of the device. 5. Click Import to start importing the person information to the client. Note Up to 2,000 persons and 5,000 cards can be imported. The person information, including person details, person's fingerprint information (if configured), and the linked cards (if configured), will be imported to the selected organization. 10.4.4 Issue Cards to Persons in Batch The client provides a convenient way to issue cards to multiple persons in a batch. Steps 1. Enter Person module. 2. Click Batch Issue Cards. All the added persons with no card issued will be displayed in the right panel. 163 DS-K1T342 Series Face Recognition Terminal User Manual 3. Optional: Enter key words (name or person ID) in the input box to filter the person(s) that need issuing cards. 4. Optional: Click Settings to set the card issuing parameters. For details, refer to Issue a Card by Local Mode. 5. Click Initialize to initialize the card enrollment station or card reader to make it ready for issuing cards. 6. Click the Card No. column and enter the card number.

- Place the card on the card enrollment station.

- Swipe the card on the card reader.

- Manually enter the card number and press the Enter key. The person(s) in the list will be issued with card(s). 10.4.5 Report Card Loss If the person lost his/her card, you can report the card loss so that the card's related access authorization will be inactive. Steps 1. Enter Person module. 2. Select the person you want to report card loss for and click Edit to open the Edit Person window. 3. In the Credential Card panel, click on the added card to set this card as lost card. After reporting card loss, the access authorization of this card will be invalid and inactive. Other person who gets this card cannot access the doors by swiping this lost card. 4. Optional: If the lost card is found, you can click to cancel the loss. After cancelling card loss, the access authorization of the person will be valid and active. 5. If the lost card is added in one access group and the access group is applied to the device already, after reporting card loss or cancelling card loss, a window will pop up to notify you to apply the changes to the device. After applying to device, these changes can take effect on the device. 10.4.6 Set Card Issuing Parameters The client provides two modes for reading a card's number: via card enrollment station or via the card reader of the access control device. If a card enrollment station is available, connect it to the PC running the client by USB interface or COM, and place the card on the card enrollment to read the card number. If not, you can also swipe the card on the card reader of the added access control device to get the card number. As a result, before issuing a card to one person, you need to set the card issuing parameters including the issuing mode and related parameters. When adding a card to one person, click Settings to open the Card Issuing Settings window. 164 DS-K1T342 Series Face Recognition Terminal User Manual Local Mode: Issue Card by Card Enrollment Station Connect a card enrollment station to the PC running the client. You can place the card on the card enrollment station to get the card number. Card Enrollment Station Select the model of the connected card enrollment station Note Currently, the supported card enrollment station models include DS-K1F100-D8, DS-K1F100-M, DS-K1F100-D8E, and DS-K1F180-D8E. Card Type This field is only available when the model is DS-K1F100-D8E or DS-K1F180-D8E. Select the card type as EM card or IC card according to the actual card type. Serial Port It is only available when the model is DS-K1F100-M. Select the COM the card enrollment station connects to. Buzzing Enable or disable the buzzing when the card number is read successfully. Card No. Type Select the type of the card number according to actual needs. M1 Card Encryption This field is only available when the model is DS-K1F100-D8, DS-K1F100-D8E, or DS-K1F180-D8E. If the card is M1 card, and if you need to enable the M1 Card Encryption function, you should enable this function and select the sector of the card to encrypt. Remote Mode: Issue Card by Card Reader Select an access control device added in the client and swipe the card on its card reader to read the card number. 10.5 Configure Schedule and Template You can configure the template including holiday and week schedule. After setting the template, you can adopt the configured template to access groups when setting the access groups, so that the access group will take effect in the time durations of the template. Note For access group settings, refer to Set Access Group to Assign Access Authorization to Persons . 165 DS-K1T342 Series Face Recognition Terminal User Manual 10.5.1 Add Holiday You can create holidays and set the days in the holidays, including start date, end date, and holiday duration in one day. Steps Note You can add up to 64 holidays in the software system. 1. Click Access Control Schedule Holiday to enter the Holiday page. 2. Click Add on the left panel. 3. Create a name for the holiday. 4. Optional: Enter the descriptions or some notifications of this holiday in the Remark box. 5. Add a holiday period to the holiday list and configure the holiday duration. Note Up to 16 holiday periods can be added to one holiday. 1) Click Add in the Holiday List field. 2) Drag the cursor to draw the time duration, which means in that duration of time, the configured access group is activated. Note Up to 8 time durations can be set to one holiday period. 3) Optional: Perform the following operations to edit the time durations. Move the cursor to the time duration and drag the time duration on the timeline bar to the

. desired position when the cursor turns to Click the time duration and directly edit the start/end time in the appeared dialog. Move the cursor to the start or the end of time duration and drag to lengthen or shorten the time duration when the cursor turns to

. 4) Optional: Select the time duration(s) that need to be deleted, and then click in the Operation column to delete the selected time duration(s). 5) Optional: Click 6) Optional: Click holiday list. 6. Click Save. in the Operation column to clear all the time duration(s) in the time bar. in the Operation column to delete this added holiday period from the 10.5.2 Add Template Template includes week schedule and holiday. You can set week schedule and assign the time duration of access authorization for different person or group. You can also select the added holiday(s) for the template. 166 DS-K1T342 Series Face Recognition Terminal User Manual Steps Note You can add up to 255 templates in the software system. 1. Click Access Control Schedule Template to enter the Template page. Note There are two default templates: All-Day Authorized and All-Day Denied, and they cannot be edited or deleted. All-Day Authorized The access authorization is valid in each day of the week and it has no holiday. All-Day Denied The access authorization is invalid in each day of the week and it has no holiday. 2. Click Add on the left panel to create a new template. 3. Create a name for the template. 4. Enter the descriptions or some notification of this template in the Remark box. 5. Edit the week schedule to apply it to the template. 1) Click Week Schedule tab on the lower panel. 2) Select a day of the week and draw time duration(s) on the timeline bar. Note Up to 8 time duration(s) can be set for each day in the week schedule. 3) Optional: Perform the following operations to edit the time durations. Move the cursor to the time duration and drag the time duration on the timeline bar to the

. desired position when the cursor turns to Click the time duration and directly edit the start/end time in the appeared dialog. Move the cursor to the start or the end of time duration and drag to lengthen or shorten the time duration when the cursor turns to

. 4) Repeat the two steps above to draw more time durations on the other days of the week. 6. Add a holiday to apply it to the template. Note Up to 4 holidays can be added to one template. 1) Click Holiday tab. 2) Select a holiday in the left list and it will be added to the selected list on the right panel. 3) Optional: Click Add to add a new holiday. Note For details about adding a holiday, refer to Add Holiday . 167 DS-K1T342 Series Face Recognition Terminal User Manual 4) Optional: Select a selected holiday in the right list and click click Clear to clear all the selected holiday(s) in the right list. 7. Click Save to save the settings and finish adding the template. to remove the selected one, or 10.6 Set Access Group to Assign Access Authorization to Persons After adding the person and configuring the person's credentials, you can create the access groups to define which person(s) can get access to which door(s) and then apply the access group to the access control device to take effect. Before You Start Add person to the client. Add access control device to the client and group access points. For details, refer to Group Management . Add template. Steps When the access group settings are changed, you need to apply the access groups to the devices again to take effect. The access group changes include changes of template, access group settings, person's access group settings, and related person details (including card number, fingerprint, face picture, linkage between card number and fingerprint, linkage between card number and fingerprint, card password, card effective period, etc). 1. Click Access Control Authorization Access Group to enter the Access Group interface. 2. Click Add to open the Add window. 3. In the Name text field, create a name for the access group as you want. 4. Select a template for the access group. Note You should configure the template before access group settings. Refer to Configure Schedule and Template for details. 5. In the left list of the Select Person field, select person(s) to assign access authority. 6. In the left list of the Select Access Point field, select door(s), door station(s) or floor(s) for the selected persons to access. 7. Click Save. You can view the selected person(s) and the selected access point(s) on the right side of the interface. 168 DS-K1T342 Series Face Recognition Terminal User Manual Figure 10-2 Display the Selected Person(s) and Access Point(s) 8. After adding the access groups, you need to apply them to the access control device to take effect. 1) Select the access group(s) to apply to the access control device. 2) Click Apply All to Devices start applying all the selected access group(s) to the access control device or door station. 3) Click Apply All to Devices or Apply Changes to Devices. Apply All to Devices This operation will clear all the existed access groups of the selected devices and then apply the new access group to the device. Apply Changes to Devices This operation will not clear the existed access groups of the selected devices and only apply the changed part of the selected access group(s) to the device(s). 4) View the applying status in the Status column or click Applying Status to view all the applied access group(s). Note You can check Display Failure Only to filter the applying results. The selected persons in the applied access groups will have the authorization to enter/exit the selected doors/door stations with their linked card(s) or fingerprints. 9. Optional: Click to edit the access group if necessary. 169 DS-K1T342 Series Face Recognition Terminal User Manual Note If you change the persons' access information or other related information, you will view the promptAccess Group to Be Applied on the right corner of the client. You can click the prompt to apply the changed data to the device. You can select either Apply Now or Apply Later. Figure 10-3 Data Synchronization 10.7 Configure Advanced Functions You can configure the advanced functions of access control to meet some special requirements in different scene. Note For the card related functions(the type of access control card), only the card(s) with access group applied will be listed when adding cards. The advanced functions should be supported by the device. Hover the cursor on the Advanced Function, and then Click function(s) to be displayed. to customize the advanced 10.7.1 Configure Device Parameters After adding the access control device, you can configure the parameters of access control device, access control points. 170 DS-K1T342 Series Face Recognition Terminal User Manual Configure Parameters for Access Control Device After adding the access control device, you can configure its parameters, including overlaying user information on picture, uploading pictures after capturing, saving captured pictures, etc. Steps 1. Click Access Control Advanced Function Device Parameter . Note If you can find Device Parameter in the Advanced Function list, Hover the cursor on the Advanced Function, and then Click to select the Device Parameter to be displayed. 2. Select an access device to show its parameters on the right page. 3. Turn the switch to ON to enable the corresponding functions. Note The displayed parameters may vary for different access control devices. Some of the following parameters are not listed in the Basic Information page, click More to edit the parameters. Voice Prompt If you enable this function, the voice prompt is enabled in the device. You can hear the voice prompt when operating in the device. Upload Pic. After Linked Capture Upload the pictures captured by linked camera to the system automatically. Save Pic. After Linked Capture If you enable this function, you can save the picture captured by linked camera to the device. Face Recognition Mode Normal Mode Recognize face via the camera normally. Deep Mode The device can recognize a much wider people range than the normal mode. This mode is applicable to a more complicated environment. Enable NFC Card If enable the function, the device can recognize the NFC card. You can present NFC card on the device. Enable M1 Card If enable the function, the device can recognize the M1 card. You can present M1 card on the device. Enable EM Card 171 DS-K1T342 Series Face Recognition Terminal User Manual If enable the function, the device can recognize the EM card. You can present EM card on the device. Note If the peripheral card reader supports presenting EM card, the function is also supported to enable/disable the EM card function. 4. Click OK. 5. Optional: Click Copy to, and then select the access control device(s) to copy the parameters in the page to the selected device(s). Configure Parameters for Door/Elevator After adding the access control device, you can configure its access point (door or floor) parameters. Before You Start Add access control device to the client. Steps 1. Click Access Control Advanced Function Device Parameter . 2. Select an access control device on the left panel, and then click to show the doors or floors of the selected device. 3. Select a door or floor to show its parameters on the right page. 4. Edit the door or floor parameters. Note The displayed parameters may vary for different access control devices. Some of the following parameters are not listed in the Basic Information page, click More to edit the parameters. Name Edit the card reader name as desired. Door Contact You can set the door sensor as remaining closed or remaining open. Usually, it is remaining closed. Exit Button Type You can set the exit button as remaining closed or remaining open. Usually, it is remaining open. Door Locked Time After swiping the normal card and relay action, the timer for locking the door starts working. Extended Open Duration 172 DS-K1T342 Series Face Recognition Terminal User Manual The door contact can be enabled with appropriate delay after person with extended accesss needs swipes her/his card. Door Left Open Timeout Alarm The alarm can be triggered if the door has not been closed in a configured time period. If it is set as 0, no alarm will be triggered. Lock Door when Door Closed The door can be locked once it is closed even if the Door Locked Time is not reached. Duress Code The door can open by inputting the duress code when there is duress. At the same time, the client can report the duress event. Super Password The specific person can open the door by inputting the super password. Dismiss Code Create a dismiss code which can be used to stop the buzzer of the card reader (by entering the dismiss code on the keypad). Note The duress code, super code, and dismiss code should be different. The duress code, super password, and the dismiss code should be different from the authentication password. The length of duress code, super password, and the dismiss code is according the device, usually it should contains 4 to 8 digits. 5. Click OK. 6. Optional: Click Copy to , and then select the door/floor(s) to copy the parameters in the page to the selected doors/floor(s). Note The door or floor's status duration settings will be copied to the selected door/floor(s) as well. Configure Parameters for Card Reader After adding the access control device, you can configure its card reader parameters. Before You Start Add access control device to the client. Steps 1. Click Access Control Advanced Function Device Parameter . 2. In the device list on the left, click to expand the door, select a card reader and you can edit the card reader's parameters on the right. 3. Edit the card reader basic parameters in the Basic Information page. 173 DS-K1T342 Series Face Recognition Terminal User Manual Note The displayed parameters may vary for different access control devices. There are part of parameters listed as follows. Refer to the user manual of the device for more details. Some of the following parameters are not listed in the Basic Information page, click More to edit the parameters. Name Edit the card reader name as desired. OK LED Polarity/Error LED Polarity/Buzzer Polarity Set OK LED Polarity/Error LED Polarity/Buzzer LED Polarity of main board according to the card reader parameters. Generally, adopts the default settings. Minimum Card Swiping Interval If the interval between card swiping of the same card is less than the set value, the card swiping is invalid. You can set it as 0 to 255. Max. Interval When Entering PWD When you inputting the password on the card reader, if the interval between pressing two digits is larger than the set value, the digits you pressed before will be cleared automatically. Alarm of Max. Failed Attempts Enable to report alarm when the card reading attempts reach the set value. Max. Times of Card Failure Set the max. failure attempts of reading card. Tampering Detection Enable the anti-tamper detection for the card reader. Communicate with Controller Every When the access control device cannot connect with the card reader for longer than the set time, the card reader will turn offline automatically. Buzzing Time Set the card reader buzzing time. The available time ranges from 0 to 5,999s. 0 represents continuous buzzing. Card Reader Type/Card Reader Description Get card reader type and description. They are read-only. Fingerprint Recognition Level Select the fingerprint recognition level in the drop-down list. Default Card Reader Authentication Mode View the default card reader authentication mode. Fingerprint Capacity 174 DS-K1T342 Series Face Recognition Terminal User Manual View the maximum number of available fingerprints. Existing Fingerprint Number View the number of existed fingerprints in the device. Score The device will score the captured picture according to the yaw angle, pitch angle, and pupillary distance. If the score is less than the configured value, face recognition will be failed. Face Recognition Timeout Value If the recognition time is more than the configured time, the device will remind you. Face Recognition Interval The time interval between two continuous face recognitions when authenticating. By default, it is 2s. Face 1:1 Matching Threshold Set the matching threshold when authenticating via 1:1 matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate when authentication. 1:N Security Level Set the matching security level when authenticating via 1:N matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate when authentication. Live Face Detection Enable or disable the live face detection function. If enabling the function, the device can recognize whether the person is a live one or not. Live Face Detection Security Level After enabling Live Face Detection function, you can set the matching security level when performing live face authentication. Max. Failed Attempts for Face Auth. Set the maximum live face detection failed attempts. The system will lock the user's face for 5 minutes if the live face detection is failed for more than the configured attempts. The same user cannot authenticate via the fake face within 5 minutes. Within the 5 minutes, the user can authenticate via the real face twice continuously to unlock. Lock Authentication Failed Face After enabling the Live Face Detection function, the system will lock the user's face for 5 minutes if the live face detection is failed for more than the configured attempts. The same user cannot authenticate via the fake face within 5 minutes. Within the 5 minutes, the user can authenticate via the real face twice continuously to unlock. Application Mode You can select indoor or others application modes according to actual environment. 4. Click OK. 175 DS-K1T342 Series Face Recognition Terminal User Manual 5. Optional: Click Copy to, and then select the card reader(s) to copy the parameters in the page to the selected card reader(s). Configure Parameters for Alarm Output After adding the access control device, if the device links to alarm outputs, you can configure the parameters. Before You Start Add access control device to the client, and make sure the device supports alarm output. Steps 1. Click Access Control Advanced Function Device Parameter to enter access control parameter configuration page. 2. In the device list on the left, click to expand the door, select an alarm input and you can edit the alarm input's parameters on the right. 3. Set the alarm output parameters. Name Edit the card reader name as desired. Alarm Output Active Time How long the alarm output will last after triggered. 4. Click OK. 5. Optional: Set the switch on the upper right corner to ON to trigger the alarm output. 10.7.2 Configure Device Parameters After adding the access control device, you can set its parameters such as network parameters. Set Parameters for Face Recognition Terminal For face recognition terminal, you can set its parameters including face picture database, QR code authentication, etc. Steps Note This function should be supported by the device. 1. Enter the Access Control module. 2. On the navigation bar on the left, enter Advanced Function More Parameters . 3. Select an access control device in the device list and click Face Recognition Terminal. 4. Set the parameters. 176 DS-K1T342 Series Face Recognition Terminal User Manual Note These parameters displayed vary according to different device models. COM Select a COM port for configuration. COM1 refers to the RS-485 interface and COM2 refers to the RS-232 interface. Face Picture Database select Deep Learning as the face picture database. Authenticate by QR Code If enabled, the device camera can scan the QR code to authenticate. By default, the function is disabled. Blocklist Authentication If enabled, the device will compare the person who want to access with the persons in the blocklist. If matched (the person is in the blocklist), the access will be denied and the device will upload an alarm to the client. If mismatched (the person is not in the blocklist), the access will be granted. Save Authenticating Face Picture If enabled, the captured face picture when authenticating will be saved on the device. MCU Version View the device MCU version. 5. Click Save. Set RS-485 Parameters You can set the access control device's RS-485 parameters including the baud rate, data bit, the stop bit, parity type, flow control type, communication mode, work mode, and connection mode. Steps Note The RS-485 Settings should be supported by the device. 1. Enter the Access Control module. 2. On the navigation bar on the left, enter Advanced Function More Parameters . 3. Select an access control device in the device list and click RS-485 to enter the RS-485 Settings page. 4. Select the serial port number from the drop-down list to set the RS-485 parameters. 5. Set the serial number, external device, authentication center, baud rate, data bit, stop bit, parity type, flow control type, communication mode, and working mode in the drop-down list. 177 DS-K1T342 Series Face Recognition Terminal User Manual 6. Click Save. The configured parameters will be applied to the device automatically. When you change the working mode or connection mode, the device will reboot automatically. Set Wiegand Parameters You can set the access control device's Wiegand channel and the communication mode. After setting the Wiegand parameters, the device can connect to Wiegand card reader via Wiegand communication. Steps Note This function should be supported by the device. 1. Enter the Access Control module. 2. On the navigation bar on the left, enter Advanced Function More Parameters . 3. Select an access control device in the device list and click Wiegand to enter the Wiegand Settings page. 4. Set the switch to on to enable the Wiegand function for the device. 5. Select the Wiegand channel No. and the communication mode from the drop-down list. Note If you set Communication Direction as Sending, you are required to set the Wiegand Mode as Wiegand 26 or Wiegand 34. 6. Check Enable Wiegand to enable the Wiegand function. 7. Click Save. The configured parameters will be applied to the device automatically. After changing the communication direction, the device will reboot automatically. Enable M1 Card Encryption M1 card encryption can improve the security level of authentication. Steps Note The function should be supported by the access control device and the card reader. 1. Enter the Access Control module. 2. On the navigation bar on the left, enter Advanced Function More Parameters . 3. Select an access control device in the device list and click M1 Card Encryption Verification to enter the M1 Card Encryption Verification page. 178 DS-K1T342 Series Face Recognition Terminal User Manual 4. Set the switch to on to enable the M1 card encryption function. 5. Set the sector ID. Note The sector ID ranges from 1 to 100. By default, Sector 13 is encrypted. It is recommended to encrypt sector 13. 6. Click Save to save the settings. 10.8 Door Control In Monitoring module, you can view the real-time status of the doors managed by the added access control device. You can also control the doors such as open/close the door, or remain the door open/closed via the client remotely. The real-time access event are displayed in this module. You can view the access details and person details. Note For the user with door control permission, the user can enter the Monitoring module and control the door. Or the icons used for control will not show. For setting the user permission, refer to Person Management . 10.8.1 Control Door Status You can control the status for the door(s), including unlock door, locking door, remaining the door unlock, remaining the door locked, remain all unlocked, etc. Before You Start Add person and assign access authorization to designed person, and person will have the access authorization to the access points (doors). For details, refer to Person Management and Set Access Group to Assign Access Authorization to Persons . Make sure the operation user has the permission of the access points (doors). For details, refer to . Steps 1. Click Monitoring to enter the status monitoring page. 2. Select an access point group on the upper-right corner. Note For managing the access point group, refer to Group Management . The doors in the selected access control group will display. 3. Click a door icon to select a door, or press Ctrl and select multiple doors. 179 DS-K1T342 Series Face Recognition Terminal User Manual Note For Remain All Unlocked and Remain All Locked, ignore this step. 4. Click the following buttons to control the door. Unlock When the door is locked, unlock it and it will be open for once. After the open duration, the door will be closed and locked again automatically. Lock When the door is unlocked, lock it and it will be closed. The person who has the access authorization can access the door with credentials. Remain Unlocked The door will be unlocked (no matter closed or open). All the persons can access the door with no credentials required. Remain Locked The door will be closed and locked. No person can access the door even if he/she has the authorized credentials, except the super users. Remain All Unlocked All doors in the group will be unlocked (no matter closed or open). All the persons can access the doors with no credentials required. Remain All Locked All doors in the group will be closed and locked. No person can access the doors even if he/she has the authorized credentials, except the super users. Capture Capture a picture manually. Note The Capture button is available when the device supports capture function. The picture is saved in the PC running the client. For setting the saving path, refer to Set File Saving Path in the user manual of the client software. Result The icon of the doors will change in real-time according to the operation if the operation is succeeded. 10.8.2 Check Real-Time Access Records The access records will display in real time, including card swiping records, face recognitions records, fingerprint comparison records, etc. You can view the person information and view the picture captured during access. 180 DS-K1T342 Series Face Recognition Terminal User Manual Steps 1. Click Monitoring and select a group from the drop-down list on the upper-right corner. The access records triggered at the doors in the selected group will display in real time. You can view the details of the records, including card No., person name, organization, event time, etc. 2. Optional: Check the event type and event status so that these events will show in the list if the events are detected. The events of unchecked type or status will not be displayed in the list. 3. Optional: Check Show Latest Event and the latest access record will be selected and displayed at the top of the record list. 4. Optional: Click the event to view the accessed person details, including person pictures

(captured picture and profile), person No., person name, organization, phone, contact address, etc. Note You can double click the captured picture to enlarge it to view the details. 5. Optional: Right click on the column name of the access event table to show or hide the column according to actual needs. 181 DS-K1T342 Series Face Recognition Terminal User Manual Appendix A. Tips for Scanning Fingerprint Recommended Finger Forefinger, middle finger or the third finger. Correct Scanning The figure displayed below is the correct way to scan your finger:

You should press your finger on the scanner horizontally. The center of your scanned finger should align with the scanner center. Incorrect Scanning The figures of scanning fingerprint displayed below are incorrect:

182 DS-K1T342 Series Face Recognition Terminal User Manual Environment The scanner should avoid direct sun light, high temperature, humid conditions and rain. When it is dry, the scanner may not recognize your fingerprint successfully. You can blow your finger and scan again. Others If your fingerprint is shallow, or it is hard to scan your fingerprint, we recommend you to use other authentication methods. If you have injuries on the scanned finger, the scanner may not recognize. You can change another finger and try again. 183 DS-K1T342 Series Face Recognition Terminal User Manual Appendix B. Tips When Collecting/Comparing Face Picture The position when collecting or comparing face picture is as below:

Positions (Recommended Distance: 0.5 m) Expression Keep your expression naturally when collecting or comparing face pictures, just like the expression in the picture below. Do not wear hat, sunglasses, or other accessories that can affect the facial recognition function. Do not make your hair cover your eyes, ears, etc. and heavy makeup is not allowed. Posture In order to get a good quality and accurate face picture, position your face looking at the camera when collecting or comparing face pictures. 184 DS-K1T342 Series Face Recognition Terminal User Manual Size Make sure your face is in the middle of the collecting window. 185 DS-K1T342 Series Face Recognition Terminal User Manual Appendix C. Tips for Installation Environment 1. Light Source Illumination Reference Value Candle: 10Lux Bulb: 100~850Lux Sunlight: More than 1200Lux 2. Avoid backlight, direct and indirect sunlight 186 DS-K1T342 Series Face Recognition Terminal User Manual Appendix D. Dimension The dimension of the device is as follows:

Figure D-1 With Fingerprint Module Note Only devices that support the fingerprint function contain a fingerprint module. 187 DS-K1T342 Series Face Recognition Terminal User Manual Figure D-2 Without Fingerprint Module 188 DS-K1T342 Series Face Recognition Terminal User Manual Appendix E. Communication Matrix and Device Command Communication Matrix Scan the following QR code to get the device communication matrix. Note that the matrix contains all communication ports of Hikvision access control and video intercom devices. Figure E-1 QR Code of Communication Matrix Device Command Scan the following QR code to get the device common serial port commands. Note that the command list contains all commonly used serial ports commands for all Hikvision access control and video intercom devices. Figure E-2 Device Command 189 UD25849B

HIIK VISION Face Recognition Terminal Model: DS-K1T342MFX WP: 12V24V=== 1A SN: AB1234567 ULAR roms Made in China FCC ID:2ADTD-K1T342MFX This device complies with Part 15 of the FCC Rules. U K Operation is subject to the following two conditions: Cc A

(1)this device may not cause harmful interference, and

(2)this device must accept any interference received, including interference that may cause undesired operation. Manufacturer: Hangzhou Hikvision Digital Technology Co.,Ltd. Address: No.555 Qianmo Road, Binjiang District,Hangzhou 310052, China [a HIKVISION |

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name Hangzhou Hikvision Digital Technology Co., Ltd. Address Grantee Code FCC ID No. 555 Qianmo Road, Binjiang District Hangzhou 310052, China 2ADTD 2ADTD-K1T342MFX Authorized Contact Name Long Cheng Contact Email Contact Phone chenglong6@hikvision.com

+8618969187825 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

a) b) c) d) e) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

labeling the equipment with the exact FCC ID as specified in this application,

(1)

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Date:2021/10/27 Applicant Signature:

Print Name:

Title:

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Long Cheng Testing & Certification Engineer Applicant Declaration Rev:0.0

Hangzhou Hikvision Digital Technology Co., Ltd. TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2ADTD-K1T342MFX To whom it may concern:

Date: 2021-10-27 We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Hangzhou Hikvision Digital Technology Co., Ltd. This authorization is valid until further written notice from the applicant. Name (Printed): Long Cheng Title: Testing & Certification Engineer Signature:

On behalf of Company: Hangzhou Hikvision Digital Technology Co., Ltd. Telephone: +8618969187825

Hangzhou Hikvision Digital Technology Co., Ltd. To:

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Hangzhou Hikvision Digital Technology Co., Ltd. No. 555 Qianmo Road, Binjiang District, angzhou 310052, China Regarding:

Confidentiality Request regarding application for FCC ID: 2ADTD-K1T342MFX LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature:

Printed Name (on file with the FCC associated with the Grantee Code): Long Cheng Title: Testing & Certification Engineer Company Name: Hangzhou Hikvision Digital Technology Co., Ltd.

Hangzhou Hikvision Digital Technology Co., Ltd. Current Date : 2021-10-27 To:

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. No. 588 West Jindu Road, Songjiang District, Shanghai, China. 201612 Dear Sir/Madam, Subject: Declaration Letter about Identity of Products

*WE (Hangzhou Hikvision Digital Technology Co., Ltd.) HEREBY DECLARED THAT Product Description Face Recognition Terminal Model No. DS-K1T342MX,DS-K1T342MFUHK,DS-K1T342MFCKV,DS-K1T342MFUV S,DS-K1T342MFKVO,DS-K1T342MFHUN,DS-K1T342MUHK,DS-K1T342M CKV,DS-K1T342MUVS,DS-K1T342MKVO,DS-K1T342MHUN,DS-K1T342D X,DS-K1T342DUHK,DS-K1T342DCKV,DS-K1T342DUVS,DS-K1T342DKV O,DS-K1T342DHUN Manufacturers Name Hangzhou Hikvision Digital Technology Co., Ltd. Manufacturers Address No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China

*Except that the model number and appearance deviation, are identical with the original product as follows:

Note: The definition of identical should be electrically identical. A device will be considered to be electrically identical if no changes are made to the devices schematics, board layouts, component layouts, chip sets, resistors and all other electrical aspects of the device are identical. Model No. ():

DS-K1T342MFX Manufacturers Name ():

Hangzhou Hikvision Digital Technology Co., Ltd. Manufacturers Address):

No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Sincerely, Signature ():

Printed Name ():

Long Cheng Position/Title ():

Testing & Certification Engineer Contact Number ():

+8618969187825