FCC ID: 2ADTD-K1T673TDWX Face Recognition Terminal

 

DS-K1T673 Series Face Recognition Terminal

User Manual

DS-K1T673 Series Face Recognition Terminal User Manual

Legal Information

©2021 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.

About this Manual

The Manual includes instructions for using and managing the Product. Pictures, charts, images and

all other information hereinafter are for description and explanation only. The information

contained in the Manual is subject to change, without notice, due to firmware updates or other

reasons. Please find the latest version of this Manual at the Hikvision website ( https://

www.hikvision.com/ ).

Please use this Manual with the guidance and assistance of professionals trained in supporting the

Product.

Trademarks

Hikvision in various jurisdictions.

Other trademarks and logos mentioned are the properties of their respective owners.

and other Hikvision's trademarks and logos are the properties of

Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT

DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED "AS IS" AND "WITH

ALL FAULTS AND ERRORS". HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING

WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR

PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION

BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,

INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS

INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,

WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY,

OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.

YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY

RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION,

PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS

INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY

TECHNICAL SUPPORT IF REQUIRED.

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE

SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.

ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT

INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF

PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.

YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE

i

DS-K1T673 Series Face Recognition Terminal User Manual

DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR

PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED

TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN

RIGHTS ABUSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER

PREVAILS.

ii

DS-K1T673 Series Face Recognition Terminal User Manual

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Danger

Caution

Note

Indicates a hazardous situation which, if not avoided, will or could

result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could

result in equipment damage, data loss, performance degradation, or

unexpected results.

Provides additional information to emphasize or supplement

important points of the main text.

iii

DS-K1T673 Series Face Recognition Terminal User Manual

Regulatory Information

FCC Information

Please take attention that changes or modification not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

FCC compliance: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or more

of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

—Consult the dealer or an experienced radio/TV technician for help

This equipment should be installed and operated with a minimum distance 20cm between the

radiator and your body.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause

undesired operation.

EU Conformity Statement

This product and - if applicable - the supplied accessories too are marked with "CE"

and comply therefore with the applicable harmonized European standards listed

iv

DS-K1T673 Series Face Recognition Terminal User Manual

under the EMC Directive 2014/30/EU, RE Directive 2014/53/EU,the RoHS Directive

2011/65/EU

2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed

of as unsorted municipal waste in the European Union. For proper recycling, return

this product to your local supplier upon the purchase of equivalent new equipment,

or dispose of it at designated collection points. For more information see:

www.recyclethis.info

2006/66/EC (battery directive): This product contains a battery that cannot be

disposed of as unsorted municipal waste in the European Union. See the product

documentation for specific battery information. The battery is marked with this

symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury

(Hg). For proper recycling, return the battery to your supplier or to a designated

collection point. For more information see:www.recyclethis.info

v

DS-K1T673 Series Face Recognition Terminal User Manual

Safety Instruction

These instructions are intended to ensure that user can use the product correctly to avoid danger

or property loss.

The precaution measure is divided into Dangers and Cautions:

Dangers: Neglecting any of the warnings may cause serious injury or death.

Cautions: Neglecting any of the cautions may cause injury or equipment damage.

Dangers: Follow these safeguards to prevent

serious injury or death.

Cautions: Follow these precautions to prevent

potential injury or material damage.

Danger:

or fire hazard.

device.

● All the electronic operation should be strictly compliance with the electrical safety regulations,

fire prevention regulations and other related regulations in your local region.

● Please use the power adapter, which is provided by normal company. This equipment is

intended to be supplied from the Class 2 surge protected power source rated DC 12V, 3A.

● Do not connect several devices to one power adapter as adapter overload may cause over-heat

● Please make sure that the power has been disconnected before you wire, install or dismantle the

● When the product is installed on wall or ceiling, the device shall be firmly fixed.

●

If smoke, odors or noise rise from the device, turn off the power at once and unplug the power

cable, and then please contact the service center.

● Do not ingest battery, Chemical Burn Hazard.

This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it

can cause severe internal burns in just 2 hours and can lead to death.

Keep new and used batteries away from children. If the battery compartment does not close

securely, stop using the product and keep it away from children. If you think batteries might have

been swallowed or placed inside any part of the body, seek immediate medical attention.

If the product does not work properly, please contact your dealer or the nearest service center.

Never attempt to disassemble the device yourself. (We shall not assume any responsibility for

problems caused by unauthorized repair or maintenance.)

●

vi

DS-K1T673 Series Face Recognition Terminal User Manual

Cautions:

● Do not drop the device or subject it to physical shock, and do not expose it to high

electromagnetism radiation. Avoid the equipment installation on vibrations surface or places

subject to shock (ignorance can cause equipment damage).

● Do not place the device in extremely hot (refer to the specification of the device for the detailed

operating temperature), cold, dusty or damp locations, and do not expose it to high

electromagnetic radiation.

● The device cover for indoor use shall be kept from rain and moisture.

● Exposing the equipment to direct sun light, low ventilation or heat source such as heater or

radiator is forbidden (ignorance can cause fire danger).

● Do not aim the device at the sun or extra bright places. A blooming or smear may occur

otherwise (which is not a malfunction however), and affecting the endurance of sensor at the

same time.

● Please use the provided glove when open up the device cover, avoid direct contact with the

device cover, because the acidic sweat of the fingers may erode the surface coating of the device

cover.

● Please use a soft and dry cloth when clean inside and outside surfaces of the device cover, do

not use alkaline detergents.

● Please keep all wrappers after unpack them for future use. In case of any failure occurred, you

need to return the device to the factory with the original wrapper. Transportation without the

original wrapper may result in damage on the device and lead to additional costs.

Improper use or replacement of the battery may result in hazard of explosion. Replace with the

same or equivalent type only. Dispose of used batteries according to the instructions provided by

the battery manufacturer.

●

● Biometric recognition products are not 100% applicable to anti-spoofing environments. If you

require a higher security level, use multiple authentication modes.

● Working temperature: -30 °C to +60 °C

●

Indoor and outdoor use. If installing the device indoors, the device should be at least 2 meters

away from the light, and at least 3 meters away from the window or the door. If installing the

device outdoors, you should apply Sililcone sealant among the cable wiring area to keep the

raindrop from entering.

● Protection level: IP65

vii

DS-K1T673 Series Face Recognition Terminal User Manual

Available Models

Product Name

Model

Wireless

Face Recognition Terminal

DS-K1T673DX

DS-K1T673DWX

DS-K1T673TDX

DS-K1T673TDWX

DS-K1T673TDGX

13.56 MHz Card Presenting

Frequency

13.56 MHz Card Presenting

Frequency, Wi-Fi

13.56 MHz Card Presenting

Frequency

13.56 MHz Card Presenting

Frequency, Wi-Fi

13.56 MHz Card Presenting

Frequency, 4G

Use only power supplies listed in the user instructions:

Model

Manufacturer

Standard

C2000IC12.0-24P-DE

C2000IC12.0-24P-GB

KPL-040F-VI

MOSO Power Supply

Technology Co., Ltd.

MOSO Power Supply

Technology Co., Ltd.

Channel Well Technology Co

Ltd.

CEE

BS

CEE

viii

DS-K1T673 Series Face Recognition Terminal User Manual

Contents

Chapter 1 Overview .................................................................................................................... 1

1.1 Overview ................................................................................................................................ 1

1.2 Features ................................................................................................................................. 1

1.2.1 Features (Normal Series) .............................................................................................. 1

1.2.2 Features (T Series) ......................................................................................................... 2

Chapter 2 Appearance ................................................................................................................ 4

Chapter 3 Installation ................................................................................................................. 6

3.1 Installation Environment ........................................................................................................ 6

3.2 Flush Mounting with Gang Box .............................................................................................. 6

3.3 Surface Mounting ................................................................................................................ 10

3.4 Mount With Bracket ............................................................................................................. 14

3.4.1 Preparation before Mounting with Bracket ................................................................ 14

3.4.2 Mount Bracket ............................................................................................................ 16

Chapter 4 Wiring ...................................................................................................................... 19

4.1 Terminal Description ............................................................................................................ 19

4.2 Wire Normal Device ............................................................................................................. 21

4.3 Wire Secure Door Control Unit ............................................................................................ 22

4.4 Wire Fire Module ................................................................................................................. 23

4.4.1 Wiring Diagram of Door Open When Powering Off .................................................... 23

4.4.2 Wiring Diagram of Door Locked When Powering Off .................................................. 25

Chapter 5 Activation ................................................................................................................. 28

5.1 Activate via Device ............................................................................................................... 28

5.2 Activate via Web Browser .................................................................................................... 30

5.3 Activate via SADP ................................................................................................................. 31

5.4 Activate Device via iVMS-4200 Client Software ................................................................... 32

Chapter 6 Quick Operation ....................................................................................................... 34

ix

DS-K1T673 Series Face Recognition Terminal User Manual

6.1 Select Language ................................................................................................................... 34

6.2 Set Application Mode .......................................................................................................... 36

6.3 Privacy Settings .................................................................................................................... 37

6.4 Set Administrator ................................................................................................................. 38

Chapter 7 Basic Operation ........................................................................................................ 41

7.1 Login .................................................................................................................................... 41

7.1.1 Login by Administrator ................................................................................................ 41

7.1.2 Login by Activation Password ...................................................................................... 43

7.2 Communication Settings ...................................................................................................... 45

7.2.1 Set Wired Network Parameters .................................................................................. 45

7.2.2 Set Wi-Fi Parameters ................................................................................................... 47

7.2.3 Set RS-485 Parameters ................................................................................................ 49

7.2.4 Set Wiegand Parameters ............................................................................................. 50

7.2.5 Set ISUP Parameters .................................................................................................... 50

7.2.6 Platform Access ........................................................................................................... 52

7.3 User Management ............................................................................................................... 52

7.3.1 Add Administrator ....................................................................................................... 53

7.3.2 Add Face Picture ......................................................................................................... 54

7.3.3 Add Fingerprint ........................................................................................................... 56

7.3.4 Add Card ..................................................................................................................... 57

7.3.5 View PIN code ............................................................................................................. 58

7.3.6 Set Authentication Mode ............................................................................................ 59

7.3.7 Search and Edit User ................................................................................................... 59

7.4 Data Management ............................................................................................................... 60

7.4.1 Delete Data ................................................................................................................. 60

7.4.2 Import Data ................................................................................................................. 60

7.4.3 Export Data ................................................................................................................. 61

7.5 Identity Authentication ........................................................................................................ 61

x

DS-K1T673 Series Face Recognition Terminal User Manual

7.5.1 Authenticate via Single Credential .............................................................................. 61

7.5.2 Authenticate via Multiple Credential .......................................................................... 62

7.6 Basic Settings ....................................................................................................................... 63

7.7 Set Biometric Parameters .................................................................................................... 65

7.8 Set Access Control Parameters ............................................................................................ 67

7.9 Time and Attendance Status Settings .................................................................................. 68

7.9.1 Disable Attendance Mode via Device ......................................................................... 68

7.9.2 Set Manual Attendance via Device ............................................................................. 69

7.9.3 Set Auto Attendance via Device .................................................................................. 70

7.9.4 Set Manual and Auto Attendance via Device .............................................................. 72

7.10 System Maintenance .......................................................................................................... 73

7.11 Video Intercom .................................................................................................................. 75

7.11.1 Call Client Software from Device ............................................................................... 75

7.11.2 Call Center from Device ............................................................................................ 76

7.11.3 Call Device from Client Software ............................................................................... 76

7.11.4 Call Room from Device .............................................................................................. 77

7.11.5 Call Mobile Client from Device .................................................................................. 77

Chapter 8 Operation via Web Browser ...................................................................................... 78

8.1 Login .................................................................................................................................... 78

8.2 Live View .............................................................................................................................. 78

8.3 Person Management ............................................................................................................ 80

8.4 Search Event ........................................................................................................................ 80

8.5 Configuration ....................................................................................................................... 81

8.5.1 Set Local Parameters ................................................................................................... 81

8.5.2 View Device Information ............................................................................................. 82

8.5.3 Set Time ...................................................................................................................... 82

8.5.4 Set DST ........................................................................................................................ 83

8.5.5 View Open Source Software License ........................................................................... 83

xi

DS-K1T673 Series Face Recognition Terminal User Manual

8.5.6 Upgrade and Maintenance ......................................................................................... 83

8.5.7 Log Query .................................................................................................................... 85

8.5.8 Security Mode Settings ............................................................................................... 85

8.5.9 Certificate Management ............................................................................................. 86

8.5.10 Change Administrator's Password ............................................................................. 87

8.5.11 View Device Arming/Disarming Information ............................................................ 87

8.5.12 Network Settings ....................................................................................................... 87

8.5.13 Set Video and Audio Parameters .............................................................................. 91

8.5.14 Customize Audio Content ......................................................................................... 92

8.5.15 Set Image Parameters ............................................................................................... 94

8.5.16 Set Supplement Light Brightness .............................................................................. 95

8.5.17 Set Beauty Parameters .............................................................................................. 95

8.5.18 Time and Attendance Settings .................................................................................. 95

8.5.19 General Settings ........................................................................................................ 98

8.5.20 Video Intercom Settings .......................................................................................... 102

8.5.21 Access Control Settings ........................................................................................... 104

8.5.22 Set Biometric Parameters ....................................................................................... 108

8.5.23 Set Notice Publication ............................................................................................. 111

Chapter 9 Client Software Configuration ................................................................................. 113

9.1 Configuration Flow of Client Software ............................................................................... 113

9.2 Device Management .......................................................................................................... 113

9.2.1 Add Device ................................................................................................................ 114

9.2.2 Reset Device Password ............................................................................................. 116

9.2.3 Manage Added Devices ............................................................................................ 117

9.3 Group Management ........................................................................................................... 118

9.3.1 Add Group ................................................................................................................. 118

9.3.2 Import Resources to Group ....................................................................................... 118

9.4 Person Management .......................................................................................................... 119

xii

DS-K1T673 Series Face Recognition Terminal User Manual

9.4.1 Add Organization ...................................................................................................... 119

9.4.2 Import and Export Person Identify Information ........................................................ 119

9.4.3 Get Person Information from Access Control Device ................................................ 122

9.4.4 Issue Cards to Persons in Batch ................................................................................. 122

9.4.5 Report Card Loss ....................................................................................................... 123

9.4.6 Set Card Issuing Parameters ...................................................................................... 123

9.5 Configure Schedule and Template ..................................................................................... 124

9.5.1 Add Holiday ............................................................................................................... 124

9.5.2 Add Template ............................................................................................................ 125

9.6 Set Access Group to Assign Access Authorization to Persons ............................................ 127

9.7 Configure Advanced Functions .......................................................................................... 129

9.7.1 Configure Device Parameters .................................................................................... 129

9.7.2 Configure Device Parameters .................................................................................... 136

9.8 Door/Elevator Control ........................................................................................................ 139

9.8.1 Control Door Status ................................................................................................... 139

9.8.2 Check Real-Time Access Records .............................................................................. 140

Appendix A. Tips for Scanning Fingerprint ............................................................................... 143

Appendix B. Tips When Collecting/Comparing Face Picture .................................................... 145

Appendix C. Tips for Installation Environment ........................................................................ 147

Appendix D. Dimension .......................................................................................................... 148

Appendix E. Communication Matrix and Device Command ..................................................... 149

xiii

DS-K1T673 Series Face Recognition Terminal User Manual

Chapter 1 Overview

Face recognition terminal is a kind of access control device for face recognition, which is mainly

applied in security access control systems, such as logistic centers, airports, university campuses,

alarm centrals, dwellings, etc.

1.1 Overview

1.2 Features

1.2.1 Features (Normal Series)

● 8-inch LCD touch screen, 800 × 1280 pixel resolution

● 2 MP wide-angle dual-lens

● Face recognition distance: 0.3 m to 3 m

● Face anti-spoofing

● Support remote video live view

● Support QR code recognition

Peripheral module needs to be connected to.

● Embedded with starlight image sensor. The face recognition effect will not be affected in dim

light or no light environment without white supplement light

● Deep learning algorithm

● Suggested height for face recognition: between 1.4 m and 1.9 m

● 50,000 face capacity, 50,000 card capacity, 5,000 fingerprint capacity and 20,000 iris capacity

(10,000 people, up to 2 iris pictures per person)

Only device with peripheral fingerprint module supports fingerprint function.

Note

Note

Note

● Multiple authentication modes

● Face recognition duration ≤ 0.2 s/User; face recognition accuracy rate ≥ 99%

Iris recognition duration ≤ 5 s/User; iris recognition accuracy rate ≥ 99.9999%

●

● The built-in card reader module adopts the design of swiping the card under the screen to

support the identification of Mifare card (IC card)

● Multiple authentication card types

● Support multiple people recognition (up to 5 people)

● Support mask wearing detection

1

DS-K1T673 Series Face Recognition Terminal User Manual

● Supports tamper alarm, door opening alarm by external force, duress card and duress password

alarm

mode.

● Support multiple display modes, including normal mode, advertisement mode, and simple

● Audio prompt

● Support authentication result display

● Connects to secure door control unit via RS-485 protocol to avoid the door opening when the

terminal is destroyed

● Connects to external access controller or Wiegand card reader via Wiegand protocol

● Remote live view via RTSP protocol; encoding mode: H.264

● Watchdog design and tamper function

● NTP, manually time synchronization, and auto synchronization

● Device parameters management, search, and settings

● Capture linkage and captured pictures saving

●

● Manage, search and set device data after logging in the device locally

● Two-way audio with client software, door station, indoor station, and main station

Imports data to the device from the client software

1.2.2 Features (T Series)

● 7-inch LCD touch screen

● 2 MP wide-angle dual-lens

● Face recognition distance: 0.3 m to 3 m

● Face anti-spoofing

● Support remote video live view

● Support QR code recognition

Note

Peripheral module needs to be connected to.

● Embedded with starlight image sensor. The face recognition effect will not be affected in dim

light or no light environment without white supplement light

● Deep learning algorithm

● Suggested height for face recognition: between 1.4 m and 1.9 m

● 100,000 face capacity, 500,000 card capacity, 10,000 fingerprint capacity, and 150,000 event

capacity

Note

Only device with peripheral fingerprint module supports fingerprint function.

● Multiple authentication modes

● Face recognition duration ≤ 0.2 s/User; face recognition accuracy rate ≥ 99%

● The built-in card reader module adopts the design of swiping the card under the screen to

support the identification of Mifare card (IC card)

● Multiple authentication card types

2

DS-K1T673 Series Face Recognition Terminal User Manual

● Support multiple people recognition (up to 5 people)

● Support mask wearing detection

● Supports tamper alarm, door opening alarm by external force, duress card and duress password

alarm

mode.

● Support multiple display modes, including normal mode, advertisement mode, and simple

● Audio prompt

● Support authentication result display

● Connects to secure door control unit via RS-485 protocol to avoid the door opening when the

terminal is destroyed

● Connects to external access controller or Wiegand card reader via Wiegand protocol

● Remote live view via RTSP protocol; encoding mode: H.264

● Watchdog design and tamper function

● NTP, manually time synchronization, and auto synchronization

● Device parameters management, search, and settings

● Capture linkage and captured pictures saving

●

Imports data to the device from the client software

● Manage, search and set device data after logging in the device locally

● Two-way audio with client software, door station, indoor station, and main station

3

DS-K1T673 Series Face Recognition Terminal User Manual

Chapter 2 Appearance

Refer to the following contents for detailed information of the face recognition terminal:

Figure 2-1 Face Recognition Terminal Diagram

Table 2-1 Description of Face Recognition Terminal

No.

Name

1

2

3

MIC

IR Light

Type-C USB Interface

4

DS-K1T673 Series Face Recognition Terminal User Manual

No.

Name

For connecting to the peripheral module.

4

5

6

7

8

9

10

11

12

13

14

15

Temperature Module Interface

Debugging Port (For debugging only)

If the audio plug diameter is greater than 8 mm, an external

adapter is required.

The SIM card slot varies with different models.

TF Card Slot (Reserved)

Note

● The figures are for reference only.

● The device supports external QR code module, Bluetooth module, fingerprint + Bluetooth

module, fingerprint + Bluetooth + QR code module, Bluetooth + QR code module, which can be

accessed according to your actual needs.

Note

IR Light

Camera

Breathing Light

Loudspeaker

Wiring Terminal

Network Interface

Audio Output

Note

Tamper

SIM Card Slot

Note

5

DS-K1T673 Series Face Recognition Terminal User Manual

Chapter 3 Installation

3.1 Installation Environment

● Avoid backlight, direct sunlight, and indirect sunlight.

● For better recognition, there should be light source in or near the installation environment.

●

If you have to install the device outdoors, you should install a protective shield (optional) for the

device.

Note

For details about installation environment, see Tips for Installation Environment.

3.2 Flush Mounting with Gang Box

Before You Start

Remove the back sheet of the device.

Steps

1. Make sure the gang box is installed on the wall.

Note

Gang box is not supplied.

6

DS-K1T673 Series Face Recognition Terminal User Manual

2. Secure the mounting plate on the gang box with 2 supplied screws (SC-K1A4X24_5).

Figure 3-1 Install Gang Box

7

DS-K1T673 Series Face Recognition Terminal User Manual

3. Route the cable through the cable hole, wire the cables and insert the cables in the gang box.

Figure 3-2 Install Mounting Plate

8

DS-K1T673 Series Face Recognition Terminal User Manual

Figure 3-3 Secure Device

Note

Apply Silicone sealant among the cable wiring area to keep the raindrop from entering.

4. Align the device with the mounting plate, and secure the device on the mounting plate with 1

supplied screw (SC-KM3X6-H2-SUS).

9

DS-K1T673 Series Face Recognition Terminal User Manual

Figure 3-4 Secure Device

5. After installation, for the proper use of the device (outdoor use), stick the protection film (parts

of models supplied) on the screen.

3.3 Surface Mounting

Steps

Note

The additional force shall be equal to three times the weight of the equipment. The equipment ad

its associated mounting means shall remain secure during the installation. After the installation,

the equipment, including any associated mounting plate, shall not be damaged.

1. According to the datum line on the mounting template, stick the mounting template on the wall

or other surfaces, 1.4 meters higher than the ground.

10

DS-K1T673 Series Face Recognition Terminal User Manual

Figure 3-5 Mounting Template

2. Drill holes on the wall or other surface according to the Hole 1 on the mounting template.

3. Remove the cable hole on the mounting plate with tools.

4. Align the holes to the mounting plate and secure the mounting plate on the wall with the 2

supplied screws (K1A×24).

11

DS-K1T673 Series Face Recognition Terminal User Manual

5. Route the cable through the cable hole of the mounting plate, and connect to corresponding

Figure 3-6 Install Mounting Plate

peripherals cables.

Note

If the device is installed outdoor, you should apply silicone sealant to the wiring exit to avoid

water from entering.

12

DS-K1T673 Series Face Recognition Terminal User Manual

6. Align the device with the mounting plate and hang the device on the mounting plate.

Figure 3-7 Apply Silicone Sealant

7. Use 1 supplied screw (KM3×6) to secure the device and the mounting plate.

Figure 3-8 Hang Device

13

DS-K1T673 Series Face Recognition Terminal User Manual

Figure 3-9 Secure Device

8. Optional: Connect the peripheral module according to your actual needs.

9. After installation, for the proper use of the device (outdoor use), stick the protection film (parts

of models supplied) on the screen.

3.4 Mount With Bracket

3.4.1 Preparation before Mounting with Bracket

Steps

1. Drill holes on the turnstile's surface according to the figure displayed below. And install water-

proof nut.

Note

Solder after pressing rivets to avoid water from entering.

14

DS-K1T673 Series Face Recognition Terminal User Manual

Figure 3-10 Drill Holes on Turnstile

2. If the installation angle needs to be 180° perpendicular to the body of the turnstile, the

following operations are required.

1) Take off the 3 screws shown in the following figure.

2) Rotate the fixed part by 180°, and install the 3 screws back.

Figure 3-11 Take off Screws

Figure 3-12 Rotate Fixed Part

15

DS-K1T673 Series Face Recognition Terminal User Manual

3.4.2 Mount Bracket

Steps

1. Pass the bracket bottom through the turnstile, and fix it into the turnstile with self-contained

nut. Adjust the bracket to the suitable angle, and fix the nut tightly by the wrench.

2. Fix the mounting plate into the bracket by 4 K1M4×8-SUS screws.

Figure 3-13 Fix Bracket

16

DS-K1T673 Series Face Recognition Terminal User Manual

3. Pass face recognition terminal cables through the cable hole, and insert them into the inner

turnstile. Fix the face recognition terminal into the mounting plate with KM3×6-H2-SUS screws.

Figure 3-14 Fix Mounting Plate

17

DS-K1T673 Series Face Recognition Terminal User Manual

Figure 3-15 Fix Face Recognition Terminal

4. After installation, for the proper use of the device (outdoor use), stick the protection film (parts

of models supplied) on the screen.

18

DS-K1T673 Series Face Recognition Terminal User Manual

Chapter 4 Wiring

The device supports connecting to the RS-485 terminal, the door lock, the exit button, the alarm

output/input devices, the Wiegand card reader, the access controller, and the power supply. You

can wire the peripherals according to the descriptions below.

If connect the Wiegand card reader with the access controller, the face recognition terminal can

transmit the authentication information to the access controller and the access controller can

judge whether to open the door or not.

Note

●

●

●

If the cable size is 18 AWG, you should use a 12 V switched-mode power supply. And the

distance between the power supply and the device should be no more than 20 m.

If the cable size is 15 AWG, you should use a 12 V switched-mode power supply. And the

distance between the power supply and the device should be no more than 30 m.

If the cable size is 12 AWG, you should use a 12 V switched-mode power supply. And the

distance between the power supply and the device should be no more than 40 m.

4.1 Terminal Description

The terminals contains power input, alarm input, alarm output, RS-485, Wiegand output, and door

lock.

The terminal's diagram is as follows:

19

DS-K1T673 Series Face Recognition Terminal User Manual

The descriptions of the terminals are as follows:

Figure 4-1 Terminal Diagram

20

A1

A2

B1

B2

B3

B4

B5

B6

C1

C2

C3

C4

C5

C6

D1

D2

D3

D4

D5

D6

DS-K1T673 Series Face Recognition Terminal User Manual

Table 4-1 Terminal Descriptions

Group

No.

Function

Color

Name

Description

Group A

Power Input

Red

+12 V

Group B

Alarm Input

Yellow/Blue

Group C

RS-485

RS-485 Wiring

Yellow/Orange IN2

Alarm Output

Yellow/Purple NC

Yellow/Brown COM

Yellow/Red

NO

Black

Black

Yellow

Blue

Black

Green

White

Black

GND

IN1

GND

485+

485-

GND

W0

W1

GND

Wiegand

Group D

Door Lock

White/Purple NC

White/Yellow COM

White/Red

NO

Black

Yellow/Grey

GND

BTN

Yellow/Green

SENSOR

Door Contact

4.2 Wire Normal Device

You can connect the terminal with normal peripherals.

21

12 VDC Power

Supply

Ground

Alarm Input 1

Ground

Alarm Input 2

Alarm Output

Wiring

Ground

Wiegand

Wiring 0

Wiegand

Wiring 1

Ground

Lock Wiring

(NC)

Common

Lock Wiring

(NO)

Ground

Exit Door

Wiring

DS-K1T673 Series Face Recognition Terminal User Manual

Figure 4-2 Device Wiring

Note

● You should set the face recognition terminal's Wiegand direction as Input to connect to a

Wiegand card reader. If connects to an access controller, you should set the Wiegand direction as

Output to transmit authentication information to the access controller.

● For details about Wiegand direction settings, see Set Wiegand Parameters .

● Do not wire the device to the electric supply directly.

4.3 Wire Secure Door Control Unit

You can connect the terminal with the secure door control unit.

The wiring diagram is as follows.

22

DS-K1T673 Series Face Recognition Terminal User Manual

Figure 4-3 Secure Door Control Unit Wiring

Note

The secure door control unit should connect to an external power supply separately. The suggested

external power supply is 12V, 0.5A.

4.4 Wire Fire Module

4.4.1 Wiring Diagram of Door Open When Powering Off

Lock Type: Anode Lock, Magnetic Lock, and Electric Bolt (NO)

Security Type: Door Open When Powering Off

Scenario: Installed in Fire Engine Access

Type 1

Note

The fire system controls the power supply of the access control system.

23

DS-K1T673 Series Face Recognition Terminal User Manual

Figure 4-4 Wire Device

Figure 4-5 Wire Secure Door Control Unit

Type 2

Note

The fire system (NO and COM, normally open when powering off) is connected with the lock and

the power supply in series. When an fire alarm is triggered, the door remains open. In normal

times, NO and COM are closed.

24

DS-K1T673 Series Face Recognition Terminal User Manual

Figure 4-6 Wiring Device

Figure 4-7 Wiring Secure Door Control Unit

4.4.2 Wiring Diagram of Door Locked When Powering Off

Lock Type: Cathode Lock, Electric Lock, and Electric Bolt (NC)

Security Type: Door Locked When Powering Off

25

DS-K1T673 Series Face Recognition Terminal User Manual

Scenario: Installed in Entrance/Exit with Fire Linkage

Note

● The Uninterpretable Power Supply (UPS) is required.

● The fire system (NC and COM, normally closed when powering off) is connected with the lock

and the power supply in series. When an fire alarm is triggered, the door remains open. In

normal times, NC and COM are open.

Figure 4-8 Device Wiring

26

DS-K1T673 Series Face Recognition Terminal User Manual

Figure 4-9 Wiring Diagram

27

DS-K1T673 Series Face Recognition Terminal User Manual

Chapter 5 Activation

You should activate the device before the first login. After powering on the device, the system will

switch to Device Activation page.

Activation via the device, SADP tool and the client software are supported.

The default values of the device are as follows:

● The default IP address: 192.0.0.64

● The default port No.: 8000

● The default user name: admin

5.1 Activate via Device

If the device is not activated, you can activate the device after it is powered on.

On the Activate Device page, create a password and confirm the password. Tap Activate and the

device will activated.

28

DS-K1T673 Series Face Recognition Terminal User Manual

Figure 5-1 Activation Page

Caution

The password strength of the device can be automatically checked. We highly recommend you

change the password of your own choosing (using a minimum of 8 characters, including at least

three kinds of following categories: upper case letters, lower case letters, numbers, and special

29

DS-K1T673 Series Face Recognition Terminal User Manual

characters) in order to increase the security of your product. And we recommend you change your

password regularly, especially in the high security system, changing the password monthly or

weekly can better protect your product.

Proper configuration of all passwords and other security settings is the responsibility of the

installer and/or end-user.

Note

Settings .

Characters containing admin and nimda are not supported to be set as activation password.

● After activation, you should select a language according to your actrual needs.

● After activation, you should select an application mode. For details, see Set Application Mode .

● After activation, if you need to set privacy, you should check the item. For details, see Privacy

● After activation, if you need to add administrator to manage the device parameters, you should

set administrator. For details, see Add Administrator .

5.2 Activate via Web Browser

You can activate the device via the web browser.

Steps

1. Enter the device default IP address (192.0.0.64) in the address bar of the web browser, and press

Enter.

Note

Caution

Note

Make sure the device IP address and the computer's should be in the same IP segment.

2. Create a new password (admin password) and confirm the password.

STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of

your own choosing (using a minimum of 8 characters, including upper case letters, lower case

letters, numbers, and special characters) in order to increase the security of your product. And

we recommend you reset your password regularly, especially in the high security system,

resetting the password monthly or weekly can better protect your product.

Characters containing admin and nimda are not supported to be set as activation password.

3. Click Activate.

4. Edit the device IP address. You can edit the IP address via the SADP tool, the device, and the

client software.

30

DS-K1T673 Series Face Recognition Terminal User Manual

5.3 Activate via SADP

SADP is a tool to detect, activate and modify the IP address of the device over the LAN.

Before You Start

● Get the SADP software from the supplied disk or the official website http://

www.hikvision.com/en/ , and install the SADP according to the prompts.

● The device and the PC that runs the SADP tool should be within the same subnet.

The following steps show how to activate a device and modify its IP address. For batch activation

and IP addresses modification, refer to User Manual of SADP for details.

Steps

1. Run the SADP software and search the online devices.

2. Find and select your device in online device list.

3. Input new password (admin password) and confirm the password.

STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of

your own choosing (using a minimum of 8 characters, including upper case letters, lower case

letters, numbers, and special characters) in order to increase the security of your product. And

we recommend you reset your password regularly, especially in the high security system,

resetting the password monthly or weekly can better protect your product.

Caution

Note

Characters containing admin and nimda are not supported to be set as activation password.

4. Click Activate to start activation.

31

DS-K1T673 Series Face Recognition Terminal User Manual

Status of the device becomes Active after successful activation.

5. Modify IP address of the device.

1) Select the device.

2) Change the device IP address to the same subnet as your computer by either modifying the IP

address manually or checking Enable DHCP.

3) Input the admin password and click Modify to activate your IP address modification.

5.4 Activate Device via iVMS-4200 Client Software

For some devices, you are required to create the password to activate them before they can be

added to the iVMS-4200 software and work properly.

Steps

Note

This function should be supported by the device.

on the right of Device Management and select Device.

1. Enter the Device Management page.

2. Click

3. Click Online Device to show the online device area.

The searched online devices are displayed in the list.

4. Check the device status (shown on Security Level column) and select an inactive device.

5. Click Activate to open the Activation dialog.

6. Create a password in the password field, and confirm the password.

32

DS-K1T673 Series Face Recognition Terminal User Manual

Caution

The password strength of the device can be automatically checked. We highly recommend you

change the password of your own choosing (using a minimum of 8 characters, including at least

three kinds of following categories: upper case letters, lower case letters, numbers, and special

characters) in order to increase the security of your product. And we recommend you change

your password regularly, especially in the high security system, changing the password monthly

or weekly can better protect your product.

Proper configuration of all passwords and other security settings is the responsibility of the

installer and/or end-user.

Note

7. Click OK to activate the device.

Characters containing admin and nimda are not supported to be set as activation password.

33

DS-K1T673 Series Face Recognition Terminal User Manual

Chapter 6 Quick Operation

6.1 Select Language

You can select a language for the device system.

After the device activation, you can select a language for the device system.

34

DS-K1T673 Series Face Recognition Terminal User Manual

Figure 6-1 Select System Language

By default, the system language is English.

Note

After you change the system language, the device will reboot automatically.

35

DS-K1T673 Series Face Recognition Terminal User Manual

6.2 Set Application Mode

After activating the device, you should select an application mode for better device application.

Steps

1. On the Welcome page, select Indoor or Others from the drop-down list.

2. Tap OK to save.

Figure 6-2 Welcome Page

36

DS-K1T673 Series Face Recognition Terminal User Manual

Note

● You can also change the settings in System Settings.

●

If you install the device indoors near the window or the face recognition function is not

working well, select Others.

If you do not configure the application mode and tap Next, the system will select Indoor by

default.

If you activate the device via other tools remotely, the system will select Indoor as the

application mode by default.

●

●

6.3 Privacy Settings

After activation, selecting application mode, and selecting network, you should set the privacy

parameters, including the picture uploading and storage.

Select parameters according to your actual needs.

Figure 6-3 Privacy

37

DS-K1T673 Series Face Recognition Terminal User Manual

Upload Captured Pic. When Auth. (Upload Captured Picture When Authenticating)

Upload the pictures captured when authenticating to the platform automatically.

Save Captured Pic. When Auth. (Save Captured Picture When Authenticating)

If you enable this function, you can save the picture when Authenticating to the device.

Save Registered Pic. (Save Registered Picture)

The registered face picture will be saved to the system if you enable the function.

Upload Pic. After Linked Capture (Upload Picture After Linked Capture)

Upload the pictures captured by linked camera to the platform automatically.

Save Pic. After Linked Capture (Save Pictures After Linked Capture)

If you enable this function, you can save the picture captured by linked camera to the device.

Tap Next to complete the settings.

6.4 Set Administrator

After device activation, you can add an administrator to manage the device parameters.

Before You Start

Activate the device and select an application mode.

Steps

1. Optional: Tap Skip to skip adding administrator if required.

2. Enter the administrator's name (optional) and tap Next.

38

DS-K1T673 Series Face Recognition Terminal User Manual

Figure 6-4 Add Administrator Page

3. Select a credential to add.

Note

Up to one credential should be added.

: Face forward at the camera. Make sure the face is in the face recognition area. Click

to

capture and click

to confirm.

: Press your finger according to the instructions on the device screen. Click

: Enter the card No. or present card on the card presenting area. Click OK.

to confirm.

Only devices connected to the external fingerprint module support fingerprint function.

-

-

-

Note

4. Click OK.

You will enter the authentication page.

Status Icon Description

/

/

Device is armed/not armed.

39

DS-K1T673 Series Face Recognition Terminal User Manual

Hik-Connect is enabled/disabled.

/

/

The device wired network is connected/not connected/connecting failed.

/

/

The device' Wi-Fi is enabled and connected/not connected/enabled but not connected.

Shortcut Keys Description

Note

You can configure those shortcut keys displayed on the screen. For details, see Basic Settings .

● Enter the device room No. and tap OK to call.

● Tap

to call the center.

Note

Enter password to authenticate.

The device should be added to the center, or the calling operation will be failed.

40

DS-K1T673 Series Face Recognition Terminal User Manual

Chapter 7 Basic Operation

7.1 Login

Login the device to set the device basic parameters.

7.1.1 Login by Administrator

If you have added an administrator for the device, only the administrator can login the device for

device operation.

Steps

1. Long tap on the initial page for 3 s and slide to the left/right by following the gesture to enter

the admin login page.

41

DS-K1T673 Series Face Recognition Terminal User Manual

2. Authenticate the administrator's face, fingerprint or card to enter the home page.

Figure 7-1 Admin Login

42

DS-K1T673 Series Face Recognition Terminal User Manual

Figure 7-2 Home Page

Note

The device will be locked for 30 minutes after 5 failed fingerprint or card attempts.

3. Optional: Tap

4. Optional: Tap

and you can enter the device activation password for login.

and you can exit the admin login page.

7.1.2 Login by Activation Password

You should login the system before other device operations. If you do not configure an

administrator, you should follow the instructions below to login.

43

DS-K1T673 Series Face Recognition Terminal User Manual

Steps

1. Long tap on the initial page for 3 s and slide to the left/right by following the gesture to enter

-

-

If you have added an administrator for the device, tap

If you haven't added an administrator for the device, enter the password.

and enter the password.

password entering page.

2. Enter the password.

3. Tap OK to enter the home page.

Note

The device will be locked for 30 minutes after 5 failed password attempts.

Figure 7-3 Home Page

44

DS-K1T673 Series Face Recognition Terminal User Manual

7.2 Communication Settings

You can set the wired network, the Wi-Fi parameter, the RS-485 parameters, the Wiegand

parameters, ISUP and access to Hik-Connect on the communication settings page.

7.2.1 Set Wired Network Parameters

You can set the device wired network parameters, including the IPv4/IPv6 IP address, the subnet

mask, the gateway, and DNS parameters.

Steps

1. Tap Comm. (Communication Settings) on the Home page to enter the Communication Settings

page.

2. On the Communication Settings page, tap Wired Network.

45

DS-K1T673 Series Face Recognition Terminal User Manual

Figure 7-4 Wired Network Settings

3. Set IPv4/IPv6 IP Address, Subnet Mask, and Gateway.

- Enable DHCP, and the system will assign IP address, subnet mask, and gateway automatically.

- Disable DHCP, and you should set the IP address, subnet mask, and gateway manually.

46

DS-K1T673 Series Face Recognition Terminal User Manual

The device's IP address and the computer IP address should be in the same IP segment.

4. Set the DNS parameters. You can enable Auto Obtain DNS, set the preferred DNS server and the

Note

alternate DNS server.

7.2.2 Set Wi-Fi Parameters

Steps

Note

page.

You can enable the Wi-Fi function and set the Wi-Fi related parameters.

The function should be supported by the device.

1. Tap Comm. (Communication Settings) on the Home page to enter the Communication Settings

2. On the Communication Settings page, tap.

47

DS-K1T673 Series Face Recognition Terminal User Manual

3. Enable the Wi-Fi function.

4. Configure the Wi-Fi parameters.

Figure 7-5 Wi-Fi Settings

- Select a Wi-Fi from the list, and enter the Wi-Fi's password. Tap OK.

-

If the target Wi-Fi is not in the list,tap Add Wi-Fi. Enter the Wi-Fi's name and password. And

tap OK.

48

DS-K1T673 Series Face Recognition Terminal User Manual

Note

Only digits, letters, and special characters are allowed in the password.

5. Set the Wi-Fi's parameters.

- By default, DHCP is enable. The system will allocate the IP address, the subnet mask, and the

gateway automatically.

If disable DHCP, you should enter the IP address, the subnet mask, and the gateway manually.

-

6. Tap OK to save the settings and go back to the Wi-Fi tab.

7. Tap

to save the network parameters.

7.2.3 Set RS-485 Parameters

The face recognition terminal can connect external access controller, secure door control unit or

card reader via the RS-485 terminal.

Steps

1. Tap Comm. (Communication Settings) on the Home page to enter the Communication Settings

page.

2. On the Communication Settings page, tap RS-485 to enter the RS-485 tab.

3. Select an peripheral type according to your actual needs.

Figure 7-6 Set RS-485 Parameters

If you select Access Controller: If connect the device to a terminal via the RS-485 interface, set

the RS-485 address as 2. If you connect the device to a controller, set the RS-485 address

according to the door No.

4. Tap the back icon at the upper left corner and you should reboot the device if you change the

Note

parameters.

49

DS-K1T673 Series Face Recognition Terminal User Manual

7.2.4 Set Wiegand Parameters

You can set the Wiegand transmission direction.

Steps

1. Tap Comm. (Communication Settings) on the Home page to enter the Communication Settings

page.

2. On the Communication Settings page, tap Wiegand to enter the Wiegand tab.

3. Enable the Wiegand function.

4. Select a transmission direction.

Figure 7-7 Wiegand Settings

● Output: A face recognition terminal can connect an external access controller. And the two

devices will transmit the card No. via Wiegand 26 or Wiegand 34.

Input: A face recognition terminal can connect a Wiegand card reader.

●

5. Tap

to save the network parameters.

Note

If you change the external device, and after you save the device parameters, the device will

reboot automatically.

7.2.5 Set ISUP Parameters

Set ISUP parameters and the device can upload data via ISUP protocol.

Before You Start

Make sure your device has connect to a network.

Steps

1. Tap Comm. → ISUP .

50

DS-K1T673 Series Face Recognition Terminal User Manual

2. Enable the ISUP function and set the ISUP server parameters.

Figure 7-8 ISUP Settings

Set the ISUP version according to your actual needs.

Enable central group and the data will be uploaded to the center group.

ISUP Version

Central Group

Main Channel

Support N1 or None.

ISUP

Address Type

Enable ISUP function and the data will be uploaded via EHome protocol.

Select an address type according to your actual needs.

51

DS-K1T673 Series Face Recognition Terminal User Manual

IP Address

Port No.

Set the ISUP server's IP address.

Set the ISUP server's port No.

Note

Port No. Range: 0 to 65535.

Device ID

Password

Set device serial no.

If you choose V5.0, you should create an account and ISUP key. If you choose other version,

you should create an ISUP account only.

Note

● Remember the ISUP account and ISUP key. You should enter the account name or the key

when the device should communicate with other platforms via ISUP protocol.

ISUP key range: 8 to 32 characters.

●

7.2.6 Platform Access

You can change the device verification code and set the server address before you add the device

to the Hik-Connect mobile client.

Before You Start

Make sure your device has connected to a network.

Steps

1. Tap Comm. (Communication Settings) on the Home page to enter the Communication Settings

page.

2. On the Communication Settings page, tap Access to Hik-Connect.

3. Enable Access to Hik-Connect

4. Enter Server IP.

5. Create the Verification Code, and you need to enter the verification code when you manage the

devices via Hik-Connect.

7.3 User Management

On the user management interface, you can add, edit, delete and search the user.

52

DS-K1T673 Series Face Recognition Terminal User Manual

7.3.1 Add Administrator

The administrator can log in the device backend and configure the device parameters.

Steps

1. Long tap on the initial page and log in the backend.

2. Tap User → + to enter the Add User page.

3. Edit the employee ID.

Note

● The employee ID should be less than 32 characters. And it can be a combination of lower

letters, upper letters, and numbers.

● The employee ID should not be duplicated.

4. Tap the Name field and input the user name on the soft keyboard.

53

Note

name.

Note

Note

Note

DS-K1T673 Series Face Recognition Terminal User Manual

● Numbers, upper case letters, lower case letters, and special characters are allowed in the user

● Up to 32 characters are allowed in the user name.

5. Optional: Add a face picture, fingerprints, cards, or Pin for the administrator.

● For details about adding a face picture, see Add Face Picture .

●

For details about adding a fingerprint, see Add Fingerprint .

● For details about adding a card, see Add Card .

● For details about adding a password, see View PIN code .

6. Optional: Set the administrator's authentication type.

For details about setting the authentication type, see Set Authentication Mode .

7. Enable the Administrator Permission function.

Enable Administrator Permission

The user is the administrator. Except for the normal attendance function, the user can also

enter the Home page to operate after authenticating the permission.

Add user's face picture to the device. And the user can use the face picture to authenticate.

Steps

1. Long tap on the initial page for 3 s and slide to the left/right by following the gesture and log in

8. Tap

to save the settings.

7.3.2 Add Face Picture

the backend.

2. Tap User → + to enter the Add User page.

3. Edit the employee ID.

Note

● The employee ID should be less than 32 characters. And it can be a combination of lower

letters, upper letters, and numbers.

● The employee ID should not be duplicated.

4. Tap the Name field and input the user name on the soft keyboard.

54

DS-K1T673 Series Face Recognition Terminal User Manual

Note

name.

● Numbers, upper case letters, lower case letters, and special characters are allowed in the user

● The suggested user name should be within 32 characters.

5. Tap the Face Picture field to enter the face picture adding page.

6. Look at the camera.

Figure 7-9 Add Face Picture

55

DS-K1T673 Series Face Recognition Terminal User Manual

Note

● Make sure your face picture is in the face picture outline when adding the face picture.

● Make sure the captured face picture is in good quality and is accurate.

● For details about the instructions of adding face pictures, see Tips When Collecting/

Comparing Face Picture .

After completely adding the face picture, a captured face picture will be displayed at the upper

right corner of the page.

7. Tap Save to save the face picture.

8. Optional: Tap Try Again and adjust your face position to add the face picture again.

9. Set the user role.

Administrator

The user is the administrator. Except for the normal attendance function, the user can also

enter the Home page to operate after authenticating the permission.

The User is the normal user. The user can only authenticate or take attendance on the initial

page.

Normal User

10. Tap

to save the settings.

7.3.3 Add Fingerprint

Steps

Note

Add a fingerprint for the user and the user can authenticate via the added fingerprint.

● Devices with fingerprint module support fingerprint function.

● Up to 10,000 fingerprints can be added.

1. Long tap on the initial page for 3 s and slide to the left/right by following the gesture and enter

the device backend.

2. Tap User → + to enter the Add User page.

3. Tap the Employee ID. field and edit the employee ID.

Note

● The employee ID should be less than 32 characters. And it can be a combination of lower

letters, upper letters, and numbers.

● The employee ID should not start with 0 and should not be duplicated.

4. Tap the Name field and input the user name on the soft keyboard.

56

DS-K1T673 Series Face Recognition Terminal User Manual

Note

name.

Note

● Numbers, upper case letters, lower case letters, and special characters are allowed in the user

● The suggested user name should be within 32 characters.

5. Tap the Fingerprint field to enter the Add Fingerprint page.

6. Follow the instructions to add a fingerprint.

● The same fingerprint cannot be repeatedly added.

● Up to 10 fingerprints can be added for one user.

● You can also use the client software or the fingerprint recorder to record fingerprints.

For details about the instructions of scanning fingerprints, see Tips for Scanning Fingerprint .

The user is the administrator. Except for the normal attendance function, the user can also

enter the Home page to operate after authenticating the permission.

The User is the normal user. The user can only authenticate or take attendance on the initial

page.

7. Set the user role.

Administrator

Normal User

8. Tap

to save the settings.

7.3.4 Add Card

Add a card for the user and the user can authenticate via the added card.

Steps

1. Long tap on the initial page for 3 s and slide to the left/right by following the gesture and log in

the backend.

2. Tap User → + to enter the Add User page.

3. Connect an external card reader according to the wiring diagram.

4. Tap the Employee ID. field and edit the employee ID.

Note

● The employee ID should be less than 32 characters. And it can be a combination of lower

letters, upper letters, and numbers.

● The employee ID should not be duplicated.

5. Tap the Name field and input the user name on the soft keyboard.

57

DS-K1T673 Series Face Recognition Terminal User Manual

● Numbers, upper case letters, lower case letters, and special characters are allowed in the user

Note

name.

Note

● The suggested user name should be within 32 characters.

6. Tap the Card field and tap +.

7. Configure the card No.

- Enter the card No. manually.

- Present the card over the card presenting area to get the card No.

● The card No. cannot be empty.

● Up to 20 characters are allowed in the card No.

● The card No. cannot be duplicated.

8. Configure the card type.

9. Set the user role.

Administrator

Normal User

10. Tap

to save the settings.

7.3.5 View PIN code

The user is the administrator. Except for the normal attendance function, the user can also

enter the Home page to operate after authenticating the permission.

The User is the normal user. The user can only authenticate or take attendance on the initial

page.

Add a PIN code for the user and the user can authenticate via the PIN code.

Steps

1. Long tap on the initial page for 3 s and slide to the left/right by following the gesture and log in

the backend.

2. Tap User → + to enter the Add User page.

3. Tap the Employee ID. field and edit the employee ID.

Note

● The employee ID should be less than 32 characters. And it can be a combination of lower

letters, upper letters, and numbers.

● The employee ID should not be duplicated.

4. Tap the Name field and input the user name on the soft keyboard.

58

DS-K1T673 Series Face Recognition Terminal User Manual

Note

name.

Note

6. Set the user role.

Administrator

Normal User

● Numbers, upper case letters, lower case letters, and special characters are allowed in the user

● The suggested user name should be within 32 characters.

5. Tap the PIN code to view the PIN code.

The PIN code cannot be edited. It can only be applied by the platform.

The user is the administrator. Except for the normal attendance function, the user can also

enter the Home page to operate after authenticating the permission.

The User is the normal user. The user can only authenticate or take attendance on the initial

page.

7. Tap

to save the settings.

7.3.6 Set Authentication Mode

After adding the user's face picture, password, or other credentials, you should set the

authentication mode and the user can authenticate his/her identity via the configured

authentication mode.

Steps

1. Long tap on the initial page for 3 s and slide to the left/right by following the gesture and log in

the backend.

2. Tap User → Add User/Edit User → Authentication Mode .

3. Select Device or Custom as the authentication mode.

If you want to select device mode, you should set the terminal authentication mode in Access

Control Settings page first. For details see Setting Access Control Parameters.

You can combine different authentication modes together according to your actual needs.

Device

Custom

4. Tap

to save the settings.

7.3.7 Search and Edit User

After adding the user, you can search the user and edit it.

59

DS-K1T673 Series Face Recognition Terminal User Manual

Search User

On the User Management page, Tap the search area to enter the Search User page. Tap Card on

the left of the page and select a search type from the drop-down list. Enter the employee ID, card

No., or the user name for search. Tap

to search.

Edit User

On the User Management page, select a user from the user list to enter the Edit User page. Follow

the steps in User Management to edit the user parameters. Tap

to save the settings.

Note

The employee ID cannot be edited.

7.4 Data Management

You can delete data, import data, and export data.

7.4.1 Delete Data

Delete user data.

7.4.2 Import Data

Note

Note

On the Home page, tap Data → Delete Data → User Data . All user data added in the device will be

deleted.

Steps

1. Plug a USB flash drive in the device.

2. On the Home page, tap Data → Import Data .

3. Tap User Data, Face Data or Access Control Parameters .

The imported access control parameters are configuration files of the device.

4. Enter the created password when you exported the data. If you do not create a password when

you exported the data, leave a blank in the input box and tap OK immediately.

●

If you want to transfer all user information from one device (Device A) to another (Device B),

you should export the information from Device A to the USB flash drive and then import from

the USB flash drive to Device B. In this case, you should import the user data before importing

the profile photo.

● The supported USB flash drive format is FAT32.

60

DS-K1T673 Series Face Recognition Terminal User Manual

● The imported pictures should be saved in the folder (named enroll_pic) of the root directory

and the picture's name should be follow the rule below:

Card No._Name_Department_Employee ID_Gender.jpg

If the folder enroll_pic cannot save all imported pictures, you can create another folders,

named enroll_pic1, enroll_pic2, enroll_pic3, enroll_pic4, under the root directory.

●

● The employee ID should be less than 32 characters. It can be a combination of lower letters,

upper letters, and numbers. It should not be duplicated, and should not start with 0.

● Requirements of face picture should follow the rules below: It should be taken in full-face

view, directly facing the camera. Do not wear a hat or head covering when taking the face

picture. The format should be JPEG or JPG. The resolution should be 640 × 480 pixel or more

than of 640 × 480 pixel. The picture size should be between 60 KB and 200 KB.

7.4.3 Export Data

Steps

1. Plug a USB flash drive in the device.

2. On the Home page, tap Data → Export Data .

3. Tap Face Data, Event Data, User Data, or Access Control Parameters.

Note

Note

The exported access control parameters are configuration files of the device.

4. Optional: Create a password for exporting. When you import those data to another device, you

should enter the password.

● The supported USB flash drive format is DB.

● The system supports the USB flash drive with the storage of 1G to 32G. Make sure the free

space of the USB flash drive is more than 512M.

● The exported user data is a DB file, which cannot be edited.

7.5 Identity Authentication

After network configuration, system parameters configuration and user configuration, you can go

back to the initial page for identity authentication. The system will authenticate person according

to the configured authentication mode.

7.5.1 Authenticate via Single Credential

Set the user authentication type before authentication. For details, see Set Authentication Mode .

Authenticate face, fingerprint, card or QR code.

Face

61

DS-K1T673 Series Face Recognition Terminal User Manual

Face forward at the camera and start authentication via face.

Place the enrolled fingerprint on the fingerprint module and start authentication via fingerprint.

Fingerprint

Card

QR Code

Note

Note

Password

Present the card on the card presenting area and start authentication via card.

The card can be normal IC card, or encrypted card.

Put the QR code in front of the device camera to authenticate via QR code.

Authentication via QR code should be supported by the device.

Enter the password to authenticate via password.

If authentication completed, a prompt "Authenticated" will pop up.

7.5.2 Authenticate via Multiple Credential

Before You Start

Set the user authentication type before authentication. For details, see Set Authentication Mode .

Steps

1. If the authentication mode is Card and Face, Password and Face, Card and Password, Card and

Face and Fingerprint, authenticate any credential according to the instructions on the live view

page.

● The card can be normal IC card, or encrypted card.

●

If the QR Code Scanning function is enabled, you can put the QR code in front of the device

camera to authenticate via QR code.

2. After the previous credential is authenticated, continue authenticate other credentials.

● For detailed information about scanning fingerprint, see Tips for Scanning Fingerprint.

● For detailed information about authenticating face, see Tips When Collecting/Comparing Face

If authentication succeeded, the prompt "Authenticated" will pop up.

Note

Note

Picture.

62

DS-K1T673 Series Face Recognition Terminal User Manual

7.6 Basic Settings

You can set the shortcut key, theme, voice settings, time settings, sleeping (s), community No.,

building No., Unit No., and beauty.

Long tap on the initial page for 3 s and slide to the left/right by following the gesture and login the

device home page. Tap Basic.

Figure 7-10 Basic Settings Page

Shortcut Key

Choose the shortcut key that displayed on the authentication page, including the QR code

function, the call function, call type, and the password entering function.

63

DS-K1T673 Series Face Recognition Terminal User Manual

● Only devices connected to the QR code module support QR code function.

● You can select call type from Call Room, Call Center, Call Specified Room No. and Call APP.

When you tap the call button on the authentication page, you should dial a room No. to

call.

Call Center

When you tap the call button on the authentication page, you can call the center directly.

Call Specified Room No.

You should set a room No. When you tap the call button on the authentication page, you

can call the configured room directly without dialing.

When you tap the call button on the authentication page, you will call the mobile client

where the device is added.

You can set the theme of the prompt window on the authentication page. You can select Theme

as Default/Simple. If select Simple, the live view of the authentication page will be disabled,

and in the meanwhile, the person's name, employee ID, face pictures will all be hidden.

You can enable/disable the voice prompt function and adjust the voice volume.

You can set the voice volume between 0 and 10.

Set the time zone, the device time and the DST.

Set the device sleeping waiting time (minute). When you are on the initial page and if you set

the sleeping time to 30 min, the device will sleep after 30 min without any operation.

If you set the sleeping time to 0, the device will not enter sleeping mode.

Note

Call Room

Call APP

Theme

Voice Settings

Note

Time Settings

Sleeping (s)

Note

Select Language

Community No.

Building No.

Select the language according to actual needs.

Set the device installed community No.

64

DS-K1T673 Series Face Recognition Terminal User Manual

You can enable the beauty function and set the smooth and the whiten parameter. Tap + or - to

control the effect strength.

Set the device installed building No.

Unit No.

Beauty

Set the device installed unit No.

Note

By default, the function is disabled.

7.7 Set Biometric Parameters

You can customize the face parameters to improve the face recognition performance. The

configurable parameters includes application mode, face liveness level, face recognition distance,

face recognition interval, wide dynamic, face 1:N security level, face 1:1 security level, ECO

settings, face with mask detection and multiple faces authentication.

Long tap on the initial page for 3 s and login the home page. Tap Biometric.

Table 7-1 Face Picture Parameters

Parameter

Description

Application Mode

Select either others or indoor according to actual environment.

Face Liveness Level

After enabling face anti-​spoofing function, you can set the matching

security level when performing live face authentication.

Face Recognition

Distance

Face Recognition

Interval

Set the valid distance between the user and the camera when

authenticating.

The time interval between two continuous face recognitions when

authenticating.

Note

You can input the number from 1 to 10.

Wide Dynamic

It is suggested to enable the WDR function if installing the device

outdoors.

When there are both very bright and very dark areas simultaneously in

the view, you can enable the WDR function to balance the brightness of

the whole image and provide clear images with details.

65

DS-K1T673 Series Face Recognition Terminal User Manual

Parameter

Description

Face 1:N Security Level Set the matching threshold when authenticating via 1:N matching mode.

The larger the value, the smaller the false accept rate and the larger the

false rejection rate.

Face 1:1 Security Level Set the matching threshold when authenticating via 1:1 matching mode.

The larger the value, the smaller the false accept rate and the larger the

false rejection rate.

ECO Settings

After enabling the ECO mode, the device will use the IR camera to

authenticate faces in the low light or dark environment. And you can set

the ECO mode threshold, ECO mode (1:N), and ECO mode (1:1).

ECO Threshold

When enabling the ECO mode, you can set the ECO mode’s threshold.

The larger the value, the easier the device entering the ECO mode.

ECO Mode (1:1)

ECO Mode (1:N)

Set the matching threshold when authenticating via ECO mode 1:1

matching mode. The larger the value, the smaller the false accept rate

and the larger the false rejection rate.

Set the matching threshold when authenticating via ECO mode 1:N

matching mode. The larger the value, the smaller the false accept rate

and the larger the false rejection rate

After enabling the face with mask detection, the system will recognize

the captured face with mask picture. You can set face with mask & face

1:N level and the strategy.

Reminder of Wearing

If the person do not wear a face mask when authenticating, the

device prompts a notification and the door will open.

Must Wear

If the person do not wear a face mask when authenticating, the

device prompts a notification and the door keeps closed.

Face with Mask

Detection

Multiple Faces

Authentication

After multiple faces authentication is enabled, multiple faces

authentication is supported.

66

DS-K1T673 Series Face Recognition Terminal User Manual

7.8 Set Access Control Parameters

You can set the access control permissions, including the functions of authentication mode, enable

NFC card, enable M1 card, door contact, open duration (s) and authentication interval (s).

On the Home page, tap ACS (Access Control Settings) to enter the Access Control Settings page.

Edit the access control parameters on this page.

The available parameters descriptions are as follows:

Figure 7-12 Access Control Parameters

Table 7-2 Access Control Parameters Descriptions

Parameter

Description

Terminal Auth. Mode (Terminal

Authentication Mode)

Select the face recognition terminal's authentication mode. You

can also customize the authentication mode.

67

DS-K1T673 Series Face Recognition Terminal User Manual

Parameter

Description

Note

● Only the device with the fingerprint module supports the

fingerprint related function.

● Biometric recognition products are not 100% applicable to

anti-spoofing environments. If you require a higher security

level, use multiple authentication modes.

If you adopt multiple authentication modes, you should

authenticate other methods before authenticating face.

●

Reader Auth. Mode (Card

Reader Authentication Mode)

Select the card reader's authentication mode.

Enable NFC Card

Enable M1 Card

Door Contact

Open Duration

Authentication Interval

Enable the function and you can present the NFC card to

authenticate.

Enable the function and you can present the M1 card to

authenticate.

You can select "Remain Open" or "Remian Closed" according to

your actual needs. By default, it is Remian Closed.

Set the door unlocking duration. If the door is not opened for

the set time, the door will be locked. Available door locked time

range: 1 to 255s.

Set the device authenticating interval. Available authentication

interval range: 0 to 65535.

7.9 Time and Attendance Status Settings

You can set the attendance mode as check in, check out, break out, break in, overtime in, and

overtime out according to your actual situation.

Note

The function should be used cooperatively with time and attendance function on the client

software.

7.9.1 Disable Attendance Mode via Device

Disable the attendance mode and the system will not display the attendance status on the initial

page.

68

DS-K1T673 Series Face Recognition Terminal User Manual

Tap T&A Status to enter the T&A Status page.

Figure 7-13 Disable Attendance Mode

Set the Attendance Mode as Disable.

You will not view or configure the attendance status on the initial page. And the system will follow

the attendance rule that configured on the platform.

7.9.2 Set Manual Attendance via Device

Set the attendance mode as manual, and you should select a status manually when you take

attendance.

Before You Start

Add at least one user, and set the user's authentication mode. For details, see User Management.

Steps

1. Tap T&A Status to enter the T&A Status page.

2. Set the Attendance Mode as Manual.

69

DS-K1T673 Series Face Recognition Terminal User Manual

Figure 7-14 Manual Attendance Mode

3. Enable the Attendance Status Required.

4. Enable a group of attendance status.

The Attendance Property will not be changed.

5. Optional: Select an status and change its name if required.

The name will be displayed on the T & A Status page and the authentication result page.

You should select an attendance status manually after authentication.

Note

Result

Note

If you do not select a status, the authentication will be failed and it will not be marked as a valid

attendance.

7.9.3 Set Auto Attendance via Device

Set the attendance mode as auto, and you can set the attendance status and its available schedule.

The system will automatically change the attendance status according to the configured schedule.

Before You Start

Add at least one user, and set the user's authentication mode. For details, see User Management.

70

DS-K1T673 Series Face Recognition Terminal User Manual

Steps

1. Tap T&A Status to enter the T&A Status page.

2. Set the Attendance Mode as Auto.

Figure 7-15 Auto Attendance Mode

3. Enable the Attendance Status function.

4. Enable a group of attendance status.

Note

The Attendance Property will not be changed.

5. Optional: Select an status and change its name if required.

The name will be displayed on the T & A Status page and the authentication result page.

6. Set the status' schedule.

1) Tap Attendance Schedule.

2) Select Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, or Sunday.

3) Set the selected attendance status's start time of the day.

4) Tap Confirm.

5) Repeat step 1 to 4 according to your actual needs.

The attendance status will be valid within the configured schedule.

Note

Result

When you authenticate on the initial page, the authentication will be marked as the configured

attendance status according to the configured schedule.

71

DS-K1T673 Series Face Recognition Terminal User Manual

Example

If set the Break Out as Monday 11:00, and Break In as Monday 12:00, the valid user's

authentication from Monday 11:00 to 12:00 will be marked as break.

7.9.4 Set Manual and Auto Attendance via Device

Set the attendance mode as Manual and Auto, and the system will automatically change the

attendance status according to the configured schedule. At the same time you can manually

change the attendance status after the authentication.

Before You Start

Add at least one user, and set the user's authentication mode. For details, see User Management.

Steps

1. Tap T&A Status to enter the T&A Status page.

2. Set the Attendance Mode as Manual and Auto.

Figure 7-16 Manual and Auto Mode

3. Enable the Attendance Status function.

4. Enable a group of attendance status.

Note

The Attendance Property will not be changed.

5. Optional: Select an status and change its name if required.

The name will be displayed on the T & A Status page and the authentication result page.

72

DS-K1T673 Series Face Recognition Terminal User Manual

6. Set the status' schedule.

1) Tap Attendance Schedule.

2) Select Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, or Sunday.

3) Set the selected attendance status's start time of the day.

4) Tap OK.

5) Repeat step 1 to 4 according to your actual needs.

The attendance status will be valid within the configured schedule.

Note

Result

On the initial page and authenticate. The authentication will be marked as the configured

attendance status according to the schedule. If you tap the edit icon on the result tab, you can

select a status to take attendance manually, the authentication will be marked as the edited

attendance status.

Example

If set the Break Out as Monday 11:00, and Break In as Monday 12:00, the valid user's

authentication from Monday 11:00 to 12:00 will be marked as break.

7.10 System Maintenance

You can view the system information and the capacity. You can also upgrade the device, restore to

factory settings, restore to default settings, and reboot the device.

Long tap on the initial page for 3 s and slide to the left/right by following the gesture and login the

home page. Tap Maint..

Hold the ? on the upper-right corner of the page and enter the password to view the version of the

device.

73

DS-K1T673 Series Face Recognition Terminal User Manual

System Information

Figure 7-17 Maintenance Page

You can view the device model, serial No., versions, address, production data, QR code, and

open source code license.

The page may vary according to different device models. Refers to the actual page for details.

You can view the number of, user, face picture, card, event and fingerprint.

Parts of the device models support displaying the fingerprint number. Refers to the actual page

for details.

Capacity

Note

Note

Device Upgrade

74

DS-K1T673 Series Face Recognition Terminal User Manual

Plug the USB flash drive in the device USB interface. Tap Upgrade, and the device will read the

digicap.dav file in the USB flash drive to start upgrading.

Unlink APP Account

Restore to Default Settings

After unlinking APP account, you cannot operate via APP.

All parameters, except for the communication settings, remotely imported user information, will

be restored to the default settings. The system will reboot to take effect.

All parameters will be restored to the factory settings. The system will reboot to take effect.

Restore to Factory Settings

Reboot

Reboot the device.

7.11 Video Intercom

After adding the device to the client software, you can call the device from the client software, call

the main station from the device, call the client software from the device, call the indoor station

from the device, or call the specific room from the device.

7.11.1 Call Client Software from Device

Steps

1. Get the client software from the supplied disk or the official website, and install the software

according to the prompts.

2. Run the client software and the control panel of the software pops up.

3. Click Device Management to enter the Device Management interface.

4. Add the device to the client software.

For details about adding device, see Add Device.

5. Call the client software.

on the device initial page.

1) Tap

2) Enter 0 in the pop-up window.

3) Tap

to call the client software.

the device and the client software.

Note

Note

6. Tap Answer on the pop-up page of the client software and you can start two-way audio between

If the device is added to multiple client softwares and when the device is calling the client

software, only the first client software added the device will pop up the call receiving window.

75

DS-K1T673 Series Face Recognition Terminal User Manual

7.11.2 Call Center from Device

Steps

1. Get the client software from the supplied disk or the official website, and install the software

according to the prompts.

2. Run the client software and the control panel of the software pops up.

3. Click Device Management to enter the Device Management interface.

4. Add the main station and the device to the client software.

For details about adding device, see Add Device.

5. Set the main station's IP address and SIP address in the remote configuration page.

For details about the operation, see the user manual of the main station.

6. Call the center.

-

-

If you have configured to call center in the Basic Settings , you can tap

If you have not configured to call center in the Basic Settings , you should tap

the center

to call the center.

→

to call

7. Answers the call via the main station and starts two-way audio.

The device will call the main station in priority.

7.11.3 Call Device from Client Software

Steps

1. Get the client software from the supplied disk or the official website, and install the software

according to the prompts.

2. Run the client software and the control panel of the software pops up.

3. Click Device Management to enter the Device Management page.

4. Add the device to the client software.

For details about adding device, see Add Device.

5. Enter the Live View page and double-click the added device to start live view.

For details about operations in the Live View page, see Live View in the user manual of the client

software.

6. Right click the live view image to open the right-click menu.

Note

Note

Note

Note

Note

76

DS-K1T673 Series Face Recognition Terminal User Manual

7. Click Start Two-Way Audio to start two-way audio between the device and the client software.

7.11.4 Call Room from Device

Steps

1. Get the client software from the supplied disk or the official website, and install the software

according to the prompts.

2. Run the client software and the control panel of the software pops up.

3. Click Device Management to enter the Device Management interface.

4. Add the indoor station and the device to the client software.

Note

For details about adding device, see Add Device.

5. Link a user to an indoor station and set a room No. for the indoor station.

6. Call the room.

-

-

If you have configured a specified room No. in the Basic Settings , you can tap

room.

If you have not configured a specified room No. in the Basic Settings , you should tap

the authentication page of the device. Enter the room No. on the dial page and tap

the room.

to call the

on

to call

7. After the indoor station answers the call, you can start two-way audio with the indoor station.

7.11.5 Call Mobile Client from Device

Steps

1. Get the mobile mobile client from the supplied disk or the official website, and install the

software according to the prompts.

2. Run the mobile client and add the device to the mobile client.

Note

For details, see the user manual of the mobile client.

3. Enter Basic Settings → Shortcut Key and enable Call APP.

4. Go back to the initial page and call the mobile client.

1) Tap

2) Tap

on the device initial page.

to call the mobile client.

77

DS-K1T673 Series Face Recognition Terminal User Manual

Chapter 8 Operation via Web Browser

8.1 Login

Note

Note

You can login via the web browser or the remote configuration of the client software.

Make sure the device is activated. For detailed information about activation, see Activation .

Login via Web Browser

Enter the device IP address in the address bar of the web browser and press Enter to enter the

login page.

Make sure that the IP address starts with "Https:".

Enter the device user name and the password. Click Login.

Login via Remote Configuration of Client Software

Download and open the client software. After adding the device, click

page.

to enter the Configuration

8.2 Live View

You can view the live video of the device.

After logging in, you will enter the live view page. You can perform the live view, capture, video

recording, and other operations.

78

DS-K1T673 Series Face Recognition Terminal User Manual

If you adjust the volume when starting two-way audio, you may hear a repeated sounds.

Function Descriptions:

Figure 8-1 Live View Page

Select the image size when starting live view.

Set the volume when starting live view.

Note

You can capture image when starting live view.

Reserved function. You can zoom in the live view image.

Unlock the linked door.

Start or stop live view.

Start or stop video recording.

79

DS-K1T673 Series Face Recognition Terminal User Manual

Select the streaming type when starting live view. You can select from the main stream and the

sub stream.

Select the window division type when starting live view.

Full screen view.

8.3 Person Management

Click and add the person's information, including the basic information, card, authentication mode,

and the

Click OK to save the person.

Add Basic Information

Click User → Add to enter the Add Person page.

Add the person's basic information, including the employee ID, the person's name, the gender, and

the user role.

Click Save to save the settings.

Add Card

Click User → Add to enter the Add Person page.

Click Add Card, enter the Card No. and select the Property, and click OK to add the card.

Click Save to save the settings.

Add Face Picture

Click User → Add to enter the Add Person page.

Click + on the right to upload a face picture from the local PC.

Note

The picture format should be JPEG and the size should be less than 200K.

Click Save to save the settings.

Add Authentication Mode

Click User → Add to enter the Add Person page.

Set the authentication mode.

Click Save to save the settings.

8.4 Search Event

Click Search to enter the Search page.

80

DS-K1T673 Series Face Recognition Terminal User Manual

Figure 8-2 Search Event

Enter the search conditions, including the event type, the employee ID, the name, the card No., the

start time, and the end time, and click Search.

The results will be displayed on the right panel.

8.5 Configuration

8.5.1 Set Local Parameters

Set the live view parameters, record file saving path, and captured pictures saving path.

Set Live View Parameters

Click Configuration → Local to enter the Local page. Configure the stream type, the play

performance, auto start live view, and the image format and click Save.

Set Record File Saving Path

Click Configuration → Local to enter the Local page. Select a record file size and select a saving

path from your local computer and click Save.

You can also click Open to open the file folder to view details.

Set Captured Pictures Saving Path

Click Configuration → Local to enter the Local page. Select a saving path from your local computer

and click Save.

81

DS-K1T673 Series Face Recognition Terminal User Manual

You can also click Open to open the file folder to view details.

8.5.2 View Device Information

View the device name, language, model, serial No., QR code, version, number of channels, alarm

input, alarm output, lock and RS-485, device capacity, etc.

Click Configuration → System → System Settings → Basic Information to enter the configuration

page.

You can view the device name, language, model, serial No., QR code, version, number of channels,

alarm input, alarm output, lock and RS-485, device capacity, etc.

8.5.3 Set Time

Set the device's time zone, synchronization mode, and the device time.

Click Configuration → System → System Settings → Time Settings .

Figure 8-3 Time Settings

Click Save to save the settings after the configuration.

Time Zone

Select the device located time zone from the drop-down list.

Time Sync.

NTP

Manual

You should set the NTP server's IP address, port No., and interval.

82

DS-K1T673 Series Face Recognition Terminal User Manual

By default, the device time should be synchronized manually. You can set the device time

manually or check Sync. with Computer Time to synchronize the device time with the

computer's time.

8.5.4 Set DST

Steps

1. Click Configuration → System → System Settings → DST .

Figure 8-4 DST Page

2. Check Enable DST.

3. Set the DST start time, end time and bias time.

4. Click Save to save the settings.

8.5.5 View Open Source Software License

Go to Configuration → System → System Settings → About , and click View Licenses to view the

device license.

8.5.6 Upgrade and Maintenance

Reboot device, restore device parameters, and upgrade device version.

Reboot Device

Click Configuration → System → Maintenance → Upgrade & Maintenance .

83

DS-K1T673 Series Face Recognition Terminal User Manual

Click Reboot to start reboot the device.

Figure 8-5 Upgrade and Maintenance Page

Restore Parameters

Click Configuration → System → Maintenance → Upgrade & Maintenance .

Restore All

All parameters will be restored to the factory settings. You should activate the device before

usage.

Default

The device will restore to the default settings, except for the device IP address and the user

information.

Unlink APP Account

Unlink the Hik-Connect account from the platform.

Import and Export Parameters

Click Configuration → System → Maintenance → Upgrade & Maintenance .

Export

Click Export to export the logs or device parameters.

You can import the exported device parameters to another device.

Note

Import

Click

and select the file to import. Click Import to start import configuration file.

84

DS-K1T673 Series Face Recognition Terminal User Manual

Upgrade

Click Configuration → System → Maintenance → Upgrade & Maintenance .

Select an upgrade type from the drop-down list. Click

local PC. Click Upgrade to start upgrading.

and select the upgrade file from your

Note

Do not power off during the upgrading.

8.5.7 Log Query

You can search and view the device logs.

Go to Configuration → System → Maintenance → Log Query .

Set the major and minor type of the log type. Set the start time and end time for searching, and

click Search.

The results will be displayed below, which including the No., time, the major type the minor type,

the channel No., the local/remote user information, the remote host IP, etc.

8.5.8 Security Mode Settings

Set the security mode for logging in the client software.

On the Device for Management page, click Configuration → System → Security → Security

Service .

Select a security mode from the drop-down list, and click Save.

Security Mode

High security level for user information verification when logging in the client software.

Compatible Mode

Enable SSH

Enable HTTP

The user information verification is compatible with the old client software version when

logging in.

To raise network security, disable SSH service. The configuration is only used to debug the

device for the professionals.

In order to increase the network security level when visiting websites, you can enable HTTP to

acquire a more secure and encrypted network communication environment. The

communication should authenticated by identity and encryption password after enabling HTTP,

which is save.

85

DS-K1T673 Series Face Recognition Terminal User Manual

8.5.9 Certificate Management

It helps to manage the server/client certificates and CA certificate.

Note

The function is only supported by certain device models.

Create and Install Self-signed Certificate

Steps

1. Go to Configuration → System → Security → Certificate Management .

2. In the Certificate Files area, select a Certificate Type from the drop-down list.

3. Click Create.

4. Input certificate information.

5. Click OK to save and install the certificate.

The created certificate is displayed in the Certificate Details area.

The certificate will be saved automatically.

6. Download the certificate and save it to an asking file in the local computer.

7. Send the asking file to a certification authority for signature.

8. Import the signed certificate.

1) Select a certificate type in the Import Passwords area, and select a certificate from the local,

2) Select a certificate type in the Import Communication Certificate area, and select a certificate

and click Install.

from the local, and click Install.

Install Other Authorized Certificate

If you already has an authorized certificate (not created by the device), you can import it to the

device directly.

Steps

1. Go to Configuration → System → Security → Certificate Management .

2. In the Import Passwords and Import Communication Certificate areas, select certificate type

and upload certificate.

3. Click Install.

Install CA Certificate

Before You Start

Prepare a CA certificate in advance.

86

DS-K1T673 Series Face Recognition Terminal User Manual

Steps

1. Go to Configuration → System → Security → Certificate Management .

2. Create an ID in the Inport CA Certificate area.

Note

The input certificate ID cannot be the same as the existing ones.

3. Upload a certificate file from the local.

4. Click Install.

8.5.10 Change Administrator's Password

.

Steps

1. Click Configuration → User Management .

2. Click

3. Enter the old password and create a new password.

4. Confirm the new password.

5. Click OK.

Caution

The password strength of the device can be automatically checked. We highly recommend you

change the password of your own choosing (using a minimum of 8 characters, including at least

three kinds of following categories: upper case letters, lower case letters, numbers, and special

characters) in order to increase the security of your product. And we recommend you change

your password regularly, especially in the high security system, changing the password monthly

or weekly can better protect your product.

Proper configuration of all passwords and other security settings is the responsibility of the

installer and/or end-user.

8.5.11 View Device Arming/Disarming Information

View device arming type and arming IP address.

Go to Configuration → User Management → Arming/Disarming Information .

You can view the device arming/disarming information. Click Refresh to refresh the page.

8.5.12 Network Settings

Set TCP/IP, port, Wi-Fi parameters, report strategy, platform access and HTTP listening.

87

DS-K1T673 Series Face Recognition Terminal User Manual

Note

Some device models do not support Wi-Fi settings. Refer to the actual products when

configuration.

Set Basic Network Parameters

Click Configuration → Network → Basic Settings → TCP/IP .

Set the parameters and click Save to save the settings.

DHCP

If uncheck the function, you should set the IPv4 address, IPv4 subnet mask, IPv4 default

gateway, IPv6 mode, IPv6 address, IPv6 subnet prefix length, IPv6 default gateway, Mac address,

and MTU.

If you check the function, the system will allocate the IPv4 address, IPv4 subnet mask, the IPv4

default gateway, IPv6 mode, IPv6 address, IPv6 subnet prefix length, and IPv6 default gateway

automatically.

NIC Type

DNS Server

Select a NIC type from the drop-down list. By default, it is Auto.

Set the preferred DNS server and the Alternate DNS server according to your actual need.

Set Port Parameters

Set the HTTP, RTSP, HTTPS and Server port parmaeters.

Click Configuration → Network → Basic Settings → Port .

HTTP

It refers to the port through which the browser accesses the device. For example, when the

HTTP Port is modified to 81, you need to enter http://192.0.0.65:81 in the browser for login.

RTSP

HTTPS

Server

It refers to the port of real-time streaming protocol.

Set the HTTPS for accessing the browser. Certificate is required when accessing.

It refers to the port through which the client adds the device.

88

DS-K1T673 Series Face Recognition Terminal User Manual

Set Wi-Fi Parameters

Set the Wi-Fi parameters for device wireless connection.

Steps

Note

The function should be supported by the device.

1. Click Configuration → Network → Basic Settings → Wi-Fi .

2. Check Wi-Fi.

3. Select a Wi-Fi

Figure 8-6 Wi-Fi Settings Page

- Click

- Click Add, and enter the SSID, working mode, and encryption type. Click Connect. When the

of a Wi-Fi in the list and enter the Wi-Fi password.

Wi-Fi is connected, click OK.

4. Optional: Set the WLAN parameters.

1) Click Network Settings.

2) Set the IP address, subnet mask, and default gateway. Or check Enable DHCP and the system

will allocate the IP address, subnet mask, and default gateway automatically.

5. Click OK.

Report Strategy Settings

You can set the center group for uploading the log via the ISUP protocol.

Go to Configuration → Network → Basic Settings → Report Strategy .

89

DS-K1T673 Series Face Recognition Terminal User Manual

You can set the center group and the system will transfer logs via ISUP protocol. Click Save to save

the settings.

Center Group

Select a center group from the drop-down list.

Main Channel

The device will communicate with the center via the main channel.

Note

N1 refers to wired network.

Set ISUP Parameters

Set the ISUP parameters for accessing device via ISUP protocol.

Steps

Note

Note

5. Click Save.

The function should be supported by the device.

1. Click Configuration → Network → Advanced Settings → Platform .

2. Select ISUP from the platform access mode drop-down list.

3. Check Enable.

4. Set the ISUP version, server address, device ID, and the ISUP status.

If you select 5.0 as the version, you should set the ISUP key as well.

Configure HTTP Listening

The device can send alarm information to the destination IP or host via HTTP protocol/HTTPS

protocol.

Before You Start

The destination IP or host name should support the HTTP protocol/HTTPS protocol to receive the

alarm information.

Note

The function should be supported by the device.

Steps

1. Click Configuration → Network → Advanced → HTTP Listening .

2. Edit the destination IP or host name, URL and port.

90

DS-K1T673 Series Face Recognition Terminal User Manual

3. Optional: Click Test to test whether the entered IP address or host name are valid.

4. Optional: Click Default to reset the destination IP or host name.

5. Click Save.

8.5.13 Set Video and Audio Parameters

Set the image quality, resolution, and the device volume.

Set Video Parameters

Click Configuration → Video/Audio → Video .

Figure 8-7 Video Settings Page

Set the video channel, the stream type, the video type, resolution, the bitrate type, video quality,

the frame rate, the Max. bitrate, the video encoding, and I frame interval.

Click Save to save the settings after the configuration.

Set Audio Parameters

Click Configuration → Video/Audio → Audio .

91

DS-K1T673 Series Face Recognition Terminal User Manual

Figure 8-8 Set Audio Parameters

Drag the block to adjust the device input and output volume.

Click Save to save the settings after the configuration.

You can also enable Voice Prompt.

Note

The functions vary according to different models. Refers to the actual device for details.

8.5.14 Customize Audio Content

Customize the output audio content when authentication succeeded and failed.

Steps

1. Click Configuration → Video/Audio → Prompt .

92

DS-K1T673 Series Face Recognition Terminal User Manual

Figure 8-9 Customize Audio Content

2. Set the appellation.

3. Enable the function.

4. Set the time duration when authentication succeeded.

1) Click Add.

2) Set the time duration and the language.

Note

Note

If authentication is succeeded in the configured time duration, the device will broadcast the

configured content.

3) Enter the audio content.

4) Optional: Repeat substep 1 to 3.

5) Optional: Click

to delete the configured time duration.

5. Set the time duration when authentication failed.

1) Click Add.

2) Set the time duration and the language.

If authentication is failed in the configured time duration, the device will broadcast the

configured content.

93

DS-K1T673 Series Face Recognition Terminal User Manual

3) Enter the audio content.

4) Optional: Repeat substep 1 to 3.

5) Optional: Click

6. Optional: Import custom prompt.

1) Select Custom Type.

2) Select the importing path, and click Import.

7. Click Save to save the settings.

to delete the configured time duration.

8.5.15 Set Image Parameters

Set the video standard, WDR, brightness, contrast, and saturation.

Steps

1. Click Configuration → Image Adjustment .

2. Configure the parameters to adjust the image.

Video Standard

Set the video frame rate when performing live view remotely. After changing the standard,

you should reboot the device to take effect.

PAL

25 frames per second. Suitable for mainland China, Hong Kong (China), the Middle East

countries, Europe countries, etc.

30 frames per second. Suitable for the USA, Canada, Japan, Taiwan (China), Korea, the

Philippines, etc.

NTSC

WDR

Enable or disable the WDR function.

When there are both very bright and very dark areas simultaneously in the view, WDR

balances the brightness level of the whole image and provide clear images with details.

Brightness/Contrast/Saturation/Sharpness

Drag the block or enter the value to adjust the live video's brightness, contrast, saturation,

and sharpness.

Start/end recording video.

Capture the image.

3. Click Default to restore the parameters to the default settings.

94

DS-K1T673 Series Face Recognition Terminal User Manual

8.5.16 Set Supplement Light Brightness

Set the device supplement light brightness.

Steps

1. Click Configuration → Image → Supplement Light Parameters .

2. Select a supplement light type and mode from the drop-down list. If you select the mode as ON,

you should set the brightness.

8.5.17 Set Beauty Parameters

You can enable beauty camera and set the parameters.

Steps

1. Click Configuration → Image → Beauty Parameters .

2. Check Enable Beauty Photos, and adjust the Whiten Level and Smoothing Skin Level according

to your actual needs.

8.5.18 Time and Attendance Settings

If you want to track and monitor when the persons start/stop work and monitor their working

hours and late arrivals, early departures, time taken on breaks, and absenteeism, you can add the

person to the shift group and assign a shift schedule (a rule for the attendance defining how the

schedule repeats, the shift type, break settings, and the card swiping rule.) to the shift group to

define the attendance parameters for the persons in the shift group.

Disable Attendance Mode via Web

Disable the attendance mode and the system will not display the attendance status on the initial

page.

Steps

1. Click Configuration → Attendance to enter the settings page.

2. Set the Attendance Mode as Disable.

Result

You will not view or configure the attendance status on the initial page. And the system will follow

the attendance rule that configured on the platform.

95

DS-K1T673 Series Face Recognition Terminal User Manual

Time Settings

Steps

1. Click Configuration → Time Settings to enter the settings page.

2. Select Status Type.

3. Optional: Edit Schedule Name according to the actual needs.

4. Drag mouse to set the schedule.

Note

Set the schedule from Monday to Sunday according to the actual needs.

5. Optional: Select a timeline and click Delete. Or click Delete All to clear the settings.

6. Click Save.

Set Manual Attendance via Web

Set the attendance mode as manual, and you should select a status manually when you take

attendance.

Before You Start

Add at least one user, and set the user's authentication mode. For details, see User Management.

Steps

1. Click Configuration → Attendance to enter the settings page.

2. Set the Attendance Mode as Manual.

3. Enable the Attendance Status Required and set the attendace status lasts duration.

4. Enable a group of attendance status.

The Attendance Property will not be changed.

5. Optional: Select an status and change its name if required.

You should select an attendance status manually after authentication.

Note

Result

Note

If you do not select a status, the authentication will be failed and it will not be marked as a valid

attendance.

Set Auto Attendance via Web

Set the attendance mode as auto, and you can set the attendance status and its available schedule.

The system will automatically change the attendance status according to the configured schedule.

96

DS-K1T673 Series Face Recognition Terminal User Manual

Before You Start

Add at least one user, and set the user's authentication mode. For details, see User Management.

Steps

1. Click Configuration → Attendance to enter the settings page.

2. Set the Attendance Mode as Auto.

3. Enable the Attendance Status function.

4. Enable a group of attendance status.

Note

The Attendance Property will not be changed.

5. Optional: Select an status and change its name if required.

6. Set the status' schedule. Refers to Time Settings for details.

Set Manual and Auto Attendance via Web

Set the attendance mode as Manual and Auto, and the system will automatically change the

attendance status according to the configured schedule. At the same time you can manually

change the attendance status after the authentication.

Before You Start

Add at least one user, and set the user's authentication mode. For details, see User Management.

Steps

1. Click Configuration → Attendance to enter the settings page.

2. Set the Attendance Mode as Manual and Auto.

3. Enable the Attendance Status function.

4. Enable a group of attendance status.

The Attendance Property will not be changed.

5. Optional: Select an status and change its name if required.

6. Set the status' schedule. Refers to Time Settings for details.

Note

Result

On the initial page and authenticate. The authentication will be marked as the configured

attendance status according to the schedule. If you tap the edit icon on the result tab, you can

select a status to take attendance manually, the authentication will be marked as the edited

attendance status.

Example

If set the Break Out as Monday 11:00, and Break In as Monday 12:00, the valid user's

authentication from Monday 11:00 to 12:00 will be marked as break.

97

DS-K1T673 Series Face Recognition Terminal User Manual

8.5.19 General Settings

Set Authentication Parameters

Click Configuration → General → Authentication Settings .

Note

The functions vary according to different models. Refers to the actual device for details.

Click Save to save the settings after the configuration.

Card Reader

Select Main Card Reader or Sub Card Reader from the drop-down list.

Main Card Reader

You can configure the device card reader's parameters.

Sub Card Reader

You can configure the connected peripheral card reader's parameters.

If select Main Card Reader:

Card Reader Type/Card Reader Description

Get card reader type and description. They are read-only.

Enable Card Reader

Enable the card reader's function.

Authentication

Select an authentication mode according to your actual needs from the drop-down list.

Multiple People Authentication

Multiple people can be authenticated at the same time.

Recognition Interval

You can set the interval between 2 continuous recognition of a same person during the

authentication. In the configured interval, Person A can only recognized once. If another person

(Person B) has recognized during the interval, Person A can recognized again.

Authentication Interval

You can set the authentication interval of the same person when authenticating. The same

person can only authenticate once in the configured interval. A second authentication will be

failed.

Alarm of Max. Failed Attempts

Max. Authentication Failed Attempts

Enable to report alarm when the card reading attempts reach the set value.

98

DS-K1T673 Series Face Recognition Terminal User Manual

Enable to report alarm when the card reading attempts reach the set value.

Enable Tampering Detection

Enable the anti-tamper detection for the card reader.

Enable Card No. Reversing

The read card No. will be in reverse sequence after enabling the function.

If select Sub Card Reader:

Card Reader Type/Card Reader Description

Get card reader type and description. They are read-only.

Enable Card Reader

Enable the card reader's function.

Authentication

Select an authentication mode according to your actual needs from the drop-down list.

Multiple People Authentication

Multiple people can be authenticated at the same time.

Recognition Interval

If the interval between card presenting of the same card is less than the configured value, the

card presenting is invalid.

Authentication Interval

You can set the authentication interval of the same person when authenticating. The same

person can only authenticate once in the configured interval. A second authentication will be

failed.

Alarm of Max. Failed Attempts

Max. Authentication Failed Attempts

Communication with Controller Every

Enable to report alarm when the card reading attempts reach the set value.

Enable to report alarm when the card reading attempts reach the set value.

When the access control device cannot connect with the card reader for longer than the set

time, the card reader will turn offline automatically.

Max. Interval When Entering Password

When you entering the password on the card reader, if the interval between pressing two digits

is longer than the set value, the digits you pressed before will be cleared automatically.

OK LED Polarity/Error LED Polarity

Set OK LED Polarity/Error LED Polarity of the access control device according to the card reader

parameters. Generally, adopts the default settings.

Enable Tampering Detection

99

DS-K1T673 Series Face Recognition Terminal User Manual

Enable the anti-tamper detection for the card reader.

Set Privacy Parameters

Set the event storage type, picture upload and storage parameters, and the picture clearing

parameters.

Go to Configuration → General → Privacy .

Event Storage Settings

Select a method to delete the event. You can select from Delete Old Events Periodically, Delete

Old Events by Specified Time, or Overwriting.

Delete Old Events Periodically

Drag the block or enter number to set the period for event deleting. All events will be deleted

according to the configured time duration.

Delete Old Events by Specified Time

Set a time and all events will be deleted on the configured time.

Overwriting

The earliest 5% events will be deleted when the system detects the stored events has been over

95% of the full space.

Authentication Settings

Display Authentication Result

Name De-identification

You can check Face Picture, Name, Employee ID and Temperature, to display the authentication

result.

You can check Name De-identification, and the whole name will not be displayed.

Picture Uploading and Storage

Upload Captured Picture When Authenticating

Upload the pictures captured when authenticating to the platform automatically.

Save Captured Picture When Authenticating

If you enable this function, you can save the picture when authenticating to the device.

Save Registered Picture

Upload Picture After Linked Capture

Save Pictures After Linked Capture

The registered face picture will be saved to the system if you enable the function.

Upload the pictures captured by linked camera to the platform automatically.

100

DS-K1T673 Series Face Recognition Terminal User Manual

If you enable this function, you can save the picture captured by linked camera to the device.

Clear All Pictures in Device

Note

All pictures cannot be restored once they are deleted.

Clear Registered Face Pictures

All registered pictures in the device will be deleted.

Clear Captured Pictures

All captured pictures in the device will be deleted.

Set Face Recognition Parameters

You can set face recognition parameters for accessing.

Click Configuration → General → Face Recognition Parameters .

You can set Working Mode as Access Control Mode. The access control mode is the device normal

mode. You should authenticate your credential for accessing.

Click Save to save the settings after the configuration.

Click Configuration → General → Card Security to enter the settings page.

Set the parameters and click Save.

Enable NFC Card

In order to prevent the mobile phone from getting the data of the access control, you can

enable NFC card to increase the security level of the data.

Enable M1 card and authenticateingby presenting M1 card is available.

Set Card Security

Enable M1 Card

M1 Card Encryption

Sector

M1 card encryption can improve the security level of authentication.

Enable the function and set the encryption sector. By default, Sector 13 is encrypted. It is

recommended to encrypt sector 13.

Enable EM Card

Enable EM card and authenticating by presenting EM card is available.

101

DS-K1T673 Series Face Recognition Terminal User Manual

Note

Enable DESFire Card

DESFire Card Read Content

If the peripheral card reader supports presenting EM card, the function is also supported to

enable/disable the EM card function.

The device can read the data from DESFire card when enabling the DESFire card function.

After enable the DESFire card content reading function, the device can read the DESFire card

content.

Set Card Authentication Parameters

Set the card reading content when authenticate via card on the device.

Go to Configuration → General → Card Authentication Settings .

Select a card authentication mode and click Save.

Full Card No.

All card No. will be read.

Wiegand 26 (3 bytes)

Wiegand 34 (4 bytes)

The device will read card via Wiegand 26 protocol (read 3 bytes).

The device will read card via Wiegand 34 protocol (read 4 bytes).

8.5.20 Video Intercom Settings

Set Video Intercom Parameters

The device can be used as a door station, outer door station, or access control device. You should

set the device No. before usage.

Click Configuration → Intercom → Device No. .

If set the device type as Door Station or Access Control Device, you can set the floor No., door

station No., and click Advanced Settings to set Phase No., Building No., and Unit No.

Click Save to save the settings after the configuration.

Device Type

The device can be used as a door station or outer door station. Select a device type from the

drop-down list.

102

DS-K1T673 Series Face Recognition Terminal User Manual

If you change the device type, you should reboot the device.

Note

Floor No.

Set the device installed floor No.

Door Station No.

Set the device installed floor No.

Note

Phase No.

Building No.

Unit No.

Note

Set the device phase No.

Set the device building No.

Set the device unit No.

If you change the No., you should reboot the device.

If you change the No., you should reboot the device.

If set the device type as Outer Door Station, you can set the period No., outer door station No.,

and community No.

Outer Door Station No.

If you select outer door station as the device type, you should enter a number between 1 and

99.

Note

If you change the No., you should reboot the device.

Phase No.

Set the device phase No.

Configure SIP Parameters

Set the device's IP address and the SIP server's IP address. After setting the parameters, you can

communicate among the access control device, door station, indoor station, main station, and the

platform.

103

DS-K1T673 Series Face Recognition Terminal User Manual

Note

Only the access control device and other devices or systems (such as door station, indoor station,

main station, platform) are in the same IP segment, the two-way audio can be performed.

Go to Configuration → Video Intercom → Linked Network Settings .

Set the main station's IP address and SIP server's IP address.

Click Save.

Press Button to Call

Steps

1. Click Intercom → Press Button to Call to enter the settings page.

2. Set the parameters.

- Edit call No. for every button.

- Check Call Management Center to set the button calling center.

Note

If you check Call Management Center and set the call No. as well, call management center has

higher privilege than call No.

8.5.21 Access Control Settings

Set Door Parameters

Click Configuration → Access Control → Door Parameters .

104

DS-K1T673 Series Face Recognition Terminal User Manual

Figure 8-10 Door Parameters Settings Page

Click Save to save the settings after the configuration.

Door No.

Select the device corresponded door No.

Name

Open Duration

You can create a name for the door.

Set the door unlocking duration. If the door is not opened for the set time, the door will be

locked.

Door Open Timeout Alarm

Door Contact

Exit Button Type

An alarm will be triggered if the door has not been closed within the configured time duration.

You can set the door contact as Remain Open or Remain Closed according to your actual needs.

By default, it is Remain Closed.

You can set the exit button as Remain Open or Remain Closed according to your actual needs.

By default, it is Remain Open.

Door Lock Powering Off Status

105

DS-K1T673 Series Face Recognition Terminal User Manual

You can set the door lock status when the door lock is powering off. By default, it is Remain

Closed.

Extended Open Duration

The door contact can be enabled with appropriate delay after person with extended access

needs swipes her/his card.

Door Remain Open Duration with First Person

Set the door open duration when first person is in. After the first person is authorized, it allows

multiple persons access the door or other authentication actions.

The door can open by inputting the duress code when there is duress. At the same time, the

client can report the duress event.

The specific person can open the door by inputting the super password.

Duress Code

Super Password

Note

You can set the RS-485 parameters including the peripheral, address, baud rate, etc.

The duress code and the super code should be different.

Set RS-485 Parameters

Click Configuration → Access Control → RS-485 Settings .

Check Enable RS-485, and set the parameters.

Click Save to save the settings after the configuration.

No.

Set the RS-485 No.

Peripheral Type

Note

RS-485 Address

Select a peripheral from the drop-down list according the actual situation. You can select from

Card Reader, Extension Module, Access Controller, or Disable.

After the peripheral is changed and saved, the device will reboot automatically.

Set the RS-485 Address according to your actual needs.

106

DS-K1T673 Series Face Recognition Terminal User Manual

If you select Access Controller: If connect the device to a terminal via the RS-485 interface, set

the RS-485 address as 2. If you connect the device to a controller, set the RS-485 address

according to the door No.

The baud rate when the devices are communicating via the RS-485 protocol.

Set Wiegand Parameters

You can set the Wiegand transmission direction.

Note

Baud Rate

Steps

Note

Some device models do not support this function. Refer to the actual products when configuration.

1. Click Configuration → Access Control → Wiegand Settings .

2. Check Wiegand to enable the Wiegand function.

3. Set a transmission direction.

Figure 8-11 Wiegand Page

Input

Output

The device can connect a Wiegand card reader.

The can connect an external access controller. And the two devices will transmit the card No.

via Wiegand 26 or 34.

4. Click Save to save the settings.

107

DS-K1T673 Series Face Recognition Terminal User Manual

Note

If you change the peripheral, and after you save the device parameters, the device will reboot

automatically.

8.5.22 Set Biometric Parameters

Set Basic Parameters

Click Configuration → Smart → Smart .

108

DS-K1T673 Series Face Recognition Terminal User Manual

Figure 8-12 Set Face Parameters

Note

The functions vary according to different models. Refers to the actual device for details.

Click Save to save the settings after the configuration.

Face Anti-spoofing

109

DS-K1T673 Series Face Recognition Terminal User Manual

Enable or disable the live face detection function. If enabling the function, the device can

recognize whether the person is a live one or not.

Note

Biometric recognition products are not 100% applicable to anti-spoofing environments. If you

require a higher security level, use multiple authentication modes.

Live Face Detection Security Level

After enabling the face anti-spoofing function, you can set the matching security level when

performing live face authentication.

Select the distance between the authenticating user and the device camera.

Select either others or indoor according to actual environment.

Recognition Distance

Application Mode

Face Recognition Mode

Normal Mode

Recognize face via the camera normally.

Deep Mode

In the deep mode, you can add the face pictures only via the user adding function of the

device or the enrollment station. It is not supported to add face pictures via pictures

importing.

The two modes cannot be compatible with each other. Do not change the mode once it is

selected. If you change the mode, all face pictures of the previous mode will be cleared.

Continuous Face Recognition Interval

Set the time interval between two continuous face recognitions when authenticating.

The maximum pitch angle when starting face authentication.

The maximum yaw angle when starting face authentication.

Note

Pitch Angle

Yaw Angle

Face Grading

Set the face grading according to your needs.

1:1 Matching Threshold

Set the matching threshold when authenticating via 1:1 matching mode. The larger the value,

the smaller the false accept rate and the larger the false rejection rate.

1:N Matching Threshold

110

DS-K1T673 Series Face Recognition Terminal User Manual

Set the matching threshold when authenticating via 1:N matching mode. The larger the value,

the smaller the false accept rate and the larger the false rejection rate.

Face Recognition Timeout Value

Set the timeout value when face recognizing. If the face recognition time is longer than the

configured value, the system will pop up a prompt.

ECO Mode

ECO Mode (1:1)

ECO Mode (1:N)

After enabling the ECO mode, the device will use the IR camera to authenticate faces in the low

light or dark environment. And you can set the ECO mode threshold, ECO mode (1:N), and ECO

mode (1:1).

Set the matching threshold when authenticating via ECO mode 1:1 matching mode. The larger

the value, the smaller the false accept rate and the larger the false rejection rate.

Set the matching threshold when authenticating via ECO mode 1:N matching mode. The larger

the value, the smaller the false accept rate and the larger the false rejection rate

Face with Mask Detection

After enabling the face with mask detection, the system will recognize the captured face with

mask picture. You can set face with mask1:N matching threshold, it's ECO mode, and the

strategy.

None

The device will detect the face with mask without prompt.

Reminder of Wearing

If the person do not wear a face mask when authenticating, the device prompts a

notification and the door will open.

Must Wear

If the person do not wear a face mask when authenticating, the device prompts a

notification and the door keeps closed.

Set Recognition Area

Click Configuration → Smart → Area Configuration .

Drag the yellow frame in the live video to adjust the recognition area. Only the face within the area

can be recognized by the system.

Click Save to save the settings.

Click

to record videos or capture pictures.

or

8.5.23 Set Notice Publication

You can set the screen saver and the sleep time for the device.

111

DS-K1T673 Series Face Recognition Terminal User Manual

Click Configuration → Theme .

Display Mode

You can select display theme for device authentication. You can select Display Mode as Simple,

Advertisement Mode or Normal. When you select Simple, the information of name, ID, face

picture will be not displayed. When you select Advertisement Mode, the advertisement will be

displayed in the screen.

Sleep

Theme Management

Enable Sleep and the device will enter the sleep mode when no operation within the configured

sleep time.

You can click + in the frame and upload the screen saver pictures from the local PC.

You can configure the welcome messages. Select the Template, and enter the main title and the

sub title, and select the Font Size and Font Color. You can also click Custom to select the

customized background picture.

By now, there is only one theme can be added.

Note

Play Schedule

After you have created a theme, you can select the theme and draw a schedule on the time line.

Select the drawn schedule and you can edit the exact start and end time.

Select the drawn schedule and you can click Delete or Delete All to delete the schedule.

Slide Show Interval

Drag the block or enter the number to set the slide show interval. The picture will be changed

according to the interval.

112

DS-K1T673 Series Face Recognition Terminal User Manual

Chapter 9 Client Software Configuration

9.1 Configuration Flow of Client Software

Follow the flow diagram below to configure on the client software.

Figure 9-1 Flow Diagram of Configuration on Client Software

9.2 Device Management

The client supports managing access control devices and video intercom devices.

113

DS-K1T673 Series Face Recognition Terminal User Manual

Example

You can control entrance & exit and manage attendance after adding access control devices to the

client; you can perform video intercom with the indoor stations and door stations.

9.2.1 Add Device

The client provides three device adding modes including by IP/domain, IP segment, and ISUP

protocol. The client also supports importing multiple devices in a batch when there are large

amount of devices to be added.

Add Device by IP Address or Domain Name

If you know the IP address or domain name of the device to add, you can add devices to the client

by specifying the IP address (or domain name), user name, password, etc.

Steps

1. Enter Device Management module.

2. Click Device tab on the top of the right panel.

The added devices are displayed on the right panel.

3. Click Add to open the Add window, and then select IP/Domain as the adding mode.

4. Enter the required information.

Create a descriptive name for the device. For example, you can use a nickname that can show

the location or feature of the device.

The IP address or domain name of the device.

The devices to add share the same port number. The default value is 8000.

Enter the device user name. By default, the user name is admin.

Enter the device password.

Caution

The password strength of the device can be automatically checked. We highly recommend

you change the password of your own choosing (using a minimum of 8 characters, including

at least three kinds of following categories: upper case letters, lower case letters, numbers,

and special characters) in order to increase the security of your product. And we recommend

Name

Address

Port

User Name

Password

114

DS-K1T673 Series Face Recognition Terminal User Manual

you change your password regularly, especially in the high security system, changing the

password monthly or weekly can better protect your product.

Proper configuration of all passwords and other security settings is the responsibility of the

installer and/or end-user.

5. Optional: Check Transmission Encryption (TLS) to enable transmission encryption using TLS

(Transport Layer Security) protocol for security purpose.

Note

● This function should be supported by the device.

●

If you have enabled Certificate Verification, you should click Open Certificate Directory to

open the default folder, and copy the certificate file exported from the device to this default

directory to strengthen the security. See for details about enabling certificate verification.

● You can log into the device to get the certificate file by web browser.

6. Check Synchronize Time to synchronize the device time with the PC running the client after

7. Optional: Check Import to Group to create a group by the device name, and import all the

adding the device to the client.

channels of the device to this group.

Example

For access control device, its access points, alarm inputs/outputs, and encoding channels (if

exist) will be imported to this group.

8. Finish adding the device.

- Click Add to add the device and back to the device list page.

- Click Add and New to save the settings and continue to add other device.

Import Devices in a Batch

You can add multiple devices to the client in a batch by entering the device parameters in a pre-

defined CSV file.

Steps

1. Enter the Device Management module.

2. Click Device tab on the top of the right panel.

3. Click Add to open the Add window, and then select Batch Import as the adding mode.

4. Click Export Template and then save the pre-defined template (CSV file) on your PC.

5. Open the exported template file and enter the required information of the devices to be added

For detailed description of the required fields, refer to the introductions in the template.

on the corresponding column.

Note

Adding Mode

Enter 0 or 1 or 2.

115

DS-K1T673 Series Face Recognition Terminal User Manual

Address

Port

User Name

Password

Edit the address of the device.

Enter the device port number. The default port number is 8000.

Enter the device user name. By default, the user name is admin.

Enter the device password.

Caution

The password strength of the device can be automatically checked. We highly recommend

you change the password of your own choosing (using a minimum of 8 characters, including

at least three kinds of following categories: upper case letters, lower case letters, numbers,

and special characters) in order to increase the security of your product. And we recommend

you change your password regularly, especially in the high security system, changing the

password monthly or weekly can better protect your product.

Proper configuration of all passwords and other security settings is the responsibility of the

installer and/or end-user.

Enter 1 to create a group by the device name. All the channels of the device will be imported

to the corresponding group by default. Enter 0 to disable this function.

Import to Group

and select the template file.

6. Click

7. Click Add to import the devices.

9.2.2 Reset Device Password

If you forgot the password of the detected online devices, you can reset the device password via

the client.

Steps

1. Enter Device Management page.

2. Click Online Device to show the online device area.

All the online devices sharing the same subnet will be displayed in the list.

3. Select the device from the list and click

4. Reset the device password.

on the Operation column.

- Click Generate to pop up the QR Code window and click Download to save the QR code to

your PC. You can also take a photo of the QR code to save it to your phone. Send the picture

to our technical support.

116

DS-K1T673 Series Face Recognition Terminal User Manual

Note

Caution

For the following operations for resetting the password, contact our technical support.

The password strength of the device can be automatically checked. We highly recommend you

change the password of your own choosing (using a minimum of 8 characters, including at least

three kinds of following categories: upper case letters, lower case letters, numbers, and special

characters) in order to increase the security of your product. And we recommend you change

your password regularly, especially in the high security system, changing the password monthly

or weekly can better protect your product.

Proper configuration of all passwords and other security settings is the responsibility of the

installer and/or end-user.

9.2.3 Manage Added Devices

After adding devices to device list, you can manage the added devices including editing device

parameters, remote configuration, viewing device status, etc.

Table 9-1 Manage Added Devices

Edit Device

to edit device information including device name, address, user

Click

name, password, etc.

Delete Device

Check one or more devices, and click Delete to delete the selected

devices.

Remote Configuration

to set remote configuration of the corresponding device. For

Click

details, refer to the user manual of device.

View Device Status

Click

to view device status, including door No., door status, etc.

Note

For different devices, you will view different information about device

status.

View Online User

to view the details of online user who access the device,

Click

including user name, user type, IP address and login time.

Refresh Device

Information

Click

to refresh and get the latest device information.

117

DS-K1T673 Series Face Recognition Terminal User Manual

9.3 Group Management

The client provides groups to manage the added resources in different groups. You can group the

resources into different groups according to the resources' locations.

Example

For example, on the 1st floor, there mounted 16 doors, 64 alarm inputs, and 16 alarm outputs. You

can organize these resources into one group (named 1st Floor) for convenient management. You

can control door status, and do some other operations of the devices after managing the resources

by groups.

9.3.1 Add Group

You can add group to organize the added device for convenient management.

Steps

1. Enter the Device Management module.

2. Click Device Management → Group to enter the group management page.

3. Create a group.

- Click Add Group and enter a group name as you want.

- Click Create Group by Device Name and select an added device to create a new group by the

name of the selected device.

Note

The resources (such as alarm inputs/outputs, access points, etc.) of this device will be

imported to the group by default.

9.3.2 Import Resources to Group

You can import the device resources (such as alarm inputs/outputs, access points, etc.) to the

added group in a batch.

Before You Start

Add a group for managing devices. Refer to Add Group .

Steps

1. Enter the Device Management module.

2. Click Device Management → Group to enter the group management page.

3. Select a group from the group list and select the resource type as Access Point, Alarm Input,

Alarm Output, etc.

4. Click Import.

5. Select the thumbnails/names of the resources in the thumbnail/list view.

118

DS-K1T673 Series Face Recognition Terminal User Manual

Note

You can click

or

to switch the resource display mode to thumbnail view or to list view.

6. Click Import to import the selected resources to the group.

9.4 Person Management

You can add person information to the system for further operations such as access control, video

intercom, time and attendance, etc. You can manage the added persons such as issuing cards to

them in a batch, importing and exporting person information in a batch, etc.

9.4.1 Add Organization

You can add an organization and import person information to the organization for effective

management of the persons. You can also add a surbodinate organization for the added one.

Steps

1. Enter Person module.

2. Select a parent organization in the left column and click Add in the upper-left corner to add an

3. Create a name for the added organization.

organization.

Note

Up to 10 levels of organizations can be added.

4. Optional: Perform the following operation(s).

Edit Organization

Hover the mouse on an added organization and click

to edit its name.

Hover the mouse on an added organization and click

to delete it.

Delete

Organization

Note

organization.

● The lower-level organizations will be deleted as well if you delete an

● Make sure there is no person added under the organization, or the

organization cannot be deleted.

Show Persons in

Sub Organization

Check Show Persons in Sub Organization and select an organization to

show persons in its sub organizations.

9.4.2 Import and Export Person Identify Information

You can import the information and pictures of multiple persons to the client software in a batch.

Meanwhile, you can also export the person information and pictures and save them in your PC.

119

DS-K1T673 Series Face Recognition Terminal User Manual

Import Person Information

You can enter the information of multiple persons in a predefined template (CSV/Excel file) to

import the information to the client in a batch.

Steps

1. Enter the Person module.

2. Select an added organization in the list, or click Add in the upper-left corner to add an

organization and then select it.

3. Click Import to open the Import panel.

4. Select Person Information as the importing mode.

5. Click Download Template for Importing Person to download the template.

6. Enter the person information in the downloaded template.

●

If the person has multiple cards, separate the card No. with semicolon.

Items with asterisk are required.

●

● By default, the Hire Date is the current date.

7. Click

8. Click Import to start importing.

to select the CSV/Excel file with person information from local PC.

Note

Note

●

If a person No. already exists in the client's database, delete the existing information before

importing.

● You can import information of no more than 2,000 persons.

Import Person Pictures

After importing face pictures for the added persons to the client, the persons in the pictures can be

identified by an added face recognition terminal. You can either import person pictures one by

one, or import multiple pictures at a time according to your need.

Before You Start

Be sure to have imported person information to the client beforehand.

Steps

1. Enter the Person module.

2. Select an added organization in the list, or click Add in the upper-left corner to add an

organization and then select it.

3. Click Import to open the Import panel and check Face.

4. Optional: Enable Verify by Device to check whether face recognition device managed in the

client can recognize the face in the photo.

to select a face picture file.

5. Click

120

DS-K1T673 Series Face Recognition Terminal User Manual

● The (folder of) face pictures should be in ZIP format.

● Each picture file should be in JPG format and should be no larger than 200 KB.

● Each picture file should be named as "Person ID_Name". The Person ID should be the same

Note

Note

with that of the imported person information.

6. Click Import to start importing.

The importing progress and result will be displayed.

Export Person Information

Before You Start

Make sure you have added persons to an organization.

Steps

1. Enter the Person module.

2. Optional: Select an organization in the list.

You can export the added persons' information to local PC as a CSV/Excel file.

All persons' information will be exported if you do not select any organization.

3. Click Export to open the Export panel.

4. Check Person Information as the content to export.

5. Check desired items to export.

6. Click Export to save the exported file in CSV/Excel file on your PC.

Export Person Pictures

You can export face picture file of the added persons and save in your PC.

Before You Start

Make sure you have added persons and their face pictures to an organization.

Steps

1. Enter the Person module.

2. Optional: Select an organization in the list.

Note

All persons' face pictures will be exported if you do not select any organization.

3. Click Export to open the Export panel and check Face as the content to export.

4. Click Export to start exporting.

121

DS-K1T673 Series Face Recognition Terminal User Manual

Note

● The exported file is in ZIP format.

● The exported face picture is named as "Person ID_Name_0" ("0" is for a full-frontal face).

9.4.3 Get Person Information from Access Control Device

If the added access control device has been configured with person information (including person

details and issued card information), you can get the person information from the device and

import them to the client for further operations.

Steps

Note

Note

Note

●

If the person name stored in the device is empty, the person name will be filled with the issued

card No. after importing to the client.

● The gender of the persons will be Male by default.

●

If the card number or person ID (employee ID) stored on the device already exists in the client

database, the person with this card number or person ID will not be imported to the client.

1. Enter Person module.

2. Select an organization to import the persons.

3. Click Get from Device.

4. Select an added access control device or the enrollment station from the drop-down list.

If you select the enrollment station, you should click Login, and set IP address, port No., user

name and password of the device.

5. Click Import to start importing the person information to the client.

Up to 2,000 persons and 5,000 cards can be imported.

The person information, including person details, and the linked cards (if configured), will be

imported to the selected organization.

9.4.4 Issue Cards to Persons in Batch

The client provides a convenient way to issue cards to multiple persons in a batch.

Steps

1. Enter Person module.

2. Click Batch Issue Cards.

All the added persons with no card issued will be displayed in the right panel.

122

DS-K1T673 Series Face Recognition Terminal User Manual

3. Optional: Enter key words (name or person ID) in the input box to filter the person(s) that need

4. Optional: Click Settings to set the card issuing parameters. For details, refer to .

5. Click Initialize to initialize the card enrollment station or card reader to make it ready for issuing

issuing cards.

cards.

6. Click the Card No. column and enter the card number.

- Place the card on the card enrollment station.

- Swipe the card on the card reader.

- Manually enter the card number and press the Enter key.

The person(s) in the list will be issued with card(s).

9.4.5 Report Card Loss

If the person lost his/her card, you can report the card loss so that the card's related access

authorization will be inactive.

Steps

1. Enter Person module.

2. Select the person you want to report card loss for and click Edit to open the Edit Person window.

3. In the Credential → Card panel, click

on the added card to set this card as lost card.

After reporting card loss, the access authorization of this card will be invalid and inactive. Other

person who gets this card cannot access the doors by swiping this lost card.

4. Optional: If the lost card is found, you can click

to cancel the loss.

After cancelling card loss, the access authorization of the person will be valid and active.

5. If the lost card is added in one access group and the access group is applied to the device

already, after reporting card loss or cancelling card loss, a window will pop up to notify you to

apply the changes to the device. After applying to device, these changes can take effect on the

device.

9.4.6 Set Card Issuing Parameters

The client provides two modes for reading a card's number: via card enrollment station or via the

card reader of the access control device. If a card enrollment station is available, connect it to the

PC running the client by USB interface or COM, and place the card on the card enrollment to read

the card number. If not, you can also swipe the card on the card reader of the added access control

device to get the card number. As a result, before issuing a card to one person, you need to set the

card issuing parameters including the issuing mode and related parameters.

When adding a card to one person, click Settings to open the Card Issuing Settings window.

Local Mode: Issue Card by Card Enrollment Station

Connect a card enrollment station to the PC running the client. You can place the card on the card

enrollment station to get the card number.

123

DS-K1T673 Series Face Recognition Terminal User Manual

Card Enrollment Station

Select the model of the connected card enrollment station

Currently, the supported card enrollment station models include DS-K1F100-D8, DS-K1F100-M,

DS-K1F100-D8E, and DS-K1F180-D8E.

Note

Card Type

Serial Port

Buzzing

Card No. Type

M1 Card Encryption

This field is only available when the model is DS-K1F100-D8E or DS-K1F180-D8E.

Select the card type as EM card or IC card according to the actual card type.

It is only available when the model is DS-K1F100-M.

Select the COM the card enrollment station connects to.

Enable or disable the buzzing when the card number is read successfully.

Select the type of the card number according to actual needs.

This field is only available when the model is DS-K1F100-D8, DS-K1F100-D8E, or DS-K1F180-D8E.

If the card is M1 card, and if you need to enable the M1 Card Encryption function, you should

enable this function and select the sector of the card to encrypt.

Remote Mode: Issue Card by Card Reader

Select an access control device added in the client and swipe the card on its card reader to read

the card number.

9.5 Configure Schedule and Template

You can configure the template including holiday and week schedule. After setting the template,

you can adopt the configured template to access groups when setting the access groups, so that

the access group will take effect in the time durations of the template.

For access group settings, refer to Set Access Group to Assign Access Authorization to Persons .

Note

9.5.1 Add Holiday

You can create holidays and set the days in the holidays, including start date, end date, and holiday

duration in one day.

124

DS-K1T673 Series Face Recognition Terminal User Manual

Steps

Note

Note

Note

You can add up to 64 holidays in the software system.

1. Click Access Control → Schedule → Holiday to enter the Holiday page.

2. Click Add on the left panel.

3. Create a name for the holiday.

4. Optional: Enter the descriptions or some notifications of this holiday in the Remark box.

5. Add a holiday period to the holiday list and configure the holiday duration.

Up to 16 holiday periods can be added to one holiday.

1) Click Add in the Holiday List field.

2) Drag the cursor to draw the time duration, which means in that duration of time, the

configured access group is activated.

Up to 8 time durations can be set to one holiday period.

3) Optional: Perform the following operations to edit the time durations.

● Move the cursor to the time duration and drag the time duration on the timeline bar to the

.

desired position when the cursor turns to

● Click the time duration and directly edit the start/end time in the appeared dialog.

● Move the cursor to the start or the end of time duration and drag to lengthen or shorten

the time duration when the cursor turns to

.

4) Optional: Select the time duration(s) that need to be deleted, and then click

in the

Operation column to delete the selected time duration(s).

in the Operation column to clear all the time duration(s) in the time bar.

in the Operation column to delete this added holiday period from the

Template includes week schedule and holiday. You can set week schedule and assign the time

duration of access authorization for different person or group. You can also select the added

holiday(s) for the template.

5) Optional: Click

6) Optional: Click

holiday list.

6. Click Save.

9.5.2 Add Template

Steps

Note

You can add up to 255 templates in the software system.

125

DS-K1T673 Series Face Recognition Terminal User Manual

1. Click Access Control → Schedule → Template to enter the Template page.

There are two default templates: All-Day Authorized and All-Day Denied, and they cannot be

edited or deleted.

All-Day Authorized

The access authorization is valid in each day of the week and it has no holiday.

Note

All-Day Denied

The access authorization is invalid in each day of the week and it has no holiday.

2. Click Add on the left panel to create a new template.

3. Create a name for the template.

4. Enter the descriptions or some notification of this template in the Remark box.

5. Edit the week schedule to apply it to the template.

1) Click Week Schedule tab on the lower panel.

2) Select a day of the week and draw time duration(s) on the timeline bar.

Up to 8 time duration(s) can be set for each day in the week schedule.

3) Optional: Perform the following operations to edit the time durations.

● Move the cursor to the time duration and drag the time duration on the timeline bar to the

.

desired position when the cursor turns to

● Click the time duration and directly edit the start/end time in the appeared dialog.

● Move the cursor to the start or the end of time duration and drag to lengthen or shorten

the time duration when the cursor turns to

.

4) Repeat the two steps above to draw more time durations on the other days of the week.

6. Add a holiday to apply it to the template.

Up to 4 holidays can be added to one template.

1) Click Holiday tab.

2) Select a holiday in the left list and it will be added to the selected list on the right panel.

3) Optional: Click Add to add a new holiday.

Note

Note

Note

For details about adding a holiday, refer to Add Holiday .

4) Optional: Select a selected holiday in the right list and click

click Clear to clear all the selected holiday(s) in the right list.

7. Click Save to save the settings and finish adding the template.

to remove the selected one, or

126

DS-K1T673 Series Face Recognition Terminal User Manual

9.6 Set Access Group to Assign Access Authorization to Persons

After adding the person and configuring the person's credentials, you can create the access groups

to define which person(s) can get access to which door(s) and then apply the access group to the

access control device to take effect.

Steps

When the access group settings are changed, you need to apply the access groups to the devices

again to take effect. The access group changes include changes of template, access group settings,

person's access group settings, and related person details (including card number, face picture,

linkage between card number and linkage between card number and card password, card effective

period, etc).

1. Click Access Control → Authorization → Access Group to enter the Access Group interface.

2. Click Add to open the Add window.

3. In the Name text field, create a name for the access group as you want.

4. Select a template for the access group.

Note

You should configure the template before access group settings. Refer to Configure Schedule

and Template for details.

5. In the left list of the Select Person field, select person(s) to assign access authority.

6. In the left list of the Select Access Point field, select door(s), door station(s) or floor(s) for the

selected persons to access.

7. Click Save.

You can view the selected person(s) and the selected access point(s) on the right side of the

interface.

127

DS-K1T673 Series Face Recognition Terminal User Manual

Figure 9-2 Display the Selected Person(s) and Access Point(s)

8. After adding the access groups, you need to apply them to the access control device to take

effect.

1) Select the access group(s) to apply to the access control device.

2) Click Apply All to Devices start applying all the selected access group(s) to the access control

3) Click Apply All to Devices or Apply Changes to Devices.

device or door station.

Apply All to Devices

This operation will clear all the existed access groups of the selected devices and then

apply the new access group to the device.

Apply Changes to Devices

This operation will not clear the existed access groups of the selected devices and only

apply the changed part of the selected access group(s) to the device(s).

4) View the applying status in the Status column or click Applying Status to view all the applied

access group(s).

Note

You can check Display Failure Only to filter the applying results.

The selected persons in the applied access groups will have the authorization to enter/exit the

selected doors/door stations with their linked card(s).

to edit the access group if necessary.

9. Optional: Click

128

DS-K1T673 Series Face Recognition Terminal User Manual

Note

If you change the persons' access information or other related information, you will view the

promptAccess Group to Be Applied on the right corner of the client.

You can click the prompt to apply the changed data to the device. You can select either Apply

Now or Apply Later.

Figure 9-4 Data Synchronization

9.7 Configure Advanced Functions

You can configure the advanced functions of access control to meet some special requirements in

different scene.

Note

● For the card related functions(the type of access control card), only the card(s) with access group

applied will be listed when adding cards.

● The advanced functions should be supported by the device.

● Hover the cursor on the Advanced Function, and then Click

function(s) to be displayed.

to customize the advanced

9.7.1 Configure Device Parameters

After adding the access control device, you can configure the parameters of access control device,

access control points.

129

DS-K1T673 Series Face Recognition Terminal User Manual

Configure Parameters for Access Control Device

After adding the access control device, you can configure its parameters, including overlaying user

information on picture, uploading pictures after capturing, saving captured pictures, etc.

Before You Start

Add access control device to the client.

Steps

1. Click Access Control → Advanced Function → Device Parameter .

If you can not find Device Parameter in the Advanced Function list, hover the cursor on the

Advanced Function, and then Click

to select the Device Parameter to be displayed.

2. Select an access device to show its parameters on the right page.

3. Turn the switch to ON to enable the corresponding functions.

Note

Note

● The displayed parameters may vary for different access control devices.

● Some of the following parameters are not listed in the Basic Information page, click More to

edit the parameters.

RS-485 Comm. Redundancy

You should enable this function if you wire the RS-485 card reader to the access control

device redundantly.

Display Detected Face

Display Card Number

Display face picture when authenticating.

Display the card information when authenticating.

Display Person Information

Display the person information when authenticating.

Overlay Person Info. on Picture

Display the person information on the captured picture.

Voice Prompt

If you enable this function, the voice prompt is enabled in the device. You can hear the voice

prompt when operating in the device.

Upload Pic. After Linked Capture

Save Pic. After Linked Capture

Upload the pictures captured by linked camera to the system automatically.

If you enable this function, you can save the picture captured by linked camera to the device.

130

DS-K1T673 Series Face Recognition Terminal User Manual

Press Key to Enter Card Number

If you enable this function, you can input the card No. by pressing the key.

Wi-Fi Probe

3G/4G

NFC Anti-Cloning

If you enable this function, the device can probe the surrounding communication devices'

MAC address and upload the MAC address to the system. If the MAC address match the

specified MAC address, the system can trigger some linkage actions.

If you enable this function, the device can communicate in 3G/4G network.

If you enable this function, you cannot use the cloned card for authentication and further

enhance security.

4. Click OK.

5. Optional: Click Copy to, and then select the access control device(s) to copy the parameters in

the page to the selected device(s).

Configure Parameters for Door/Elevator

After adding the access control device, you can configure its access point (door or floor)

parameters.

Before You Start

Add access control device to the client.

Steps

1. Click Access Control → Advanced Function → Device Parameter .

2. Select an access control device on the left panel, and then click

the selected device.

3. Select a door or floor to show its parameters on the right page.

4. Edit the door or floor parameters.

to show the doors or floors of

Note

● The displayed parameters may vary for different access control devices.

● Some of the following parameters are not listed in the Basic Information page, click More to

edit the parameters.

Name

Door Contact

Edit the card reader name as desired.

You can set the door sensor as remaining closed or remaining open. Usually, it is remaining

closed.

Exit Button Type

131

DS-K1T673 Series Face Recognition Terminal User Manual

You can set the exit button as remaining closed or remaining open. Usually, it is remaining

open.

Door Locked Time

Extended Open Duration

After swiping the normal card and relay action, the timer for locking the door starts working.

The door contact can be enabled with appropriate delay after person with extended accesss

needs swipes her/his card.

Door Left Open Timeout Alarm

The alarm can be triggered if the door has not been closed in a configured time period. If it is

set as 0, no alarm will be triggered.

Lock Door when Door Closed

The door can be locked once it is closed even if the Door Locked Time is not reached.

The door can open by inputting the duress code when there is duress. At the same time, the

client can report the duress event.

The specific person can open the door by inputting the super password.

Create a dismiss code which can be used to stop the buzzer of the card reader (by entering

the dismiss code on the keypad).

Duress Code

Super Password

Dismiss Code

Note

● The duress code, super code, and dismiss code should be different.

● The duress code, super password, and the dismiss code should be different from the

● The length of duress code, super password, and the dismiss code is according the device,

authentication password.

usually it should contains 4 to 8 digits.

5. Click OK.

6. Optional: Click Copy to , and then select the door/floor(s) to copy the parameters in the page to

the selected doors/floor(s).

Note

The door or floor's status duration settings will be copied to the selected door/floor(s) as well.

Configure Parameters for Card Reader

After adding the access control device, you can configure its card reader parameters.

Before You Start

Add access control device to the client.

132

DS-K1T673 Series Face Recognition Terminal User Manual

Steps

1. Click Access Control → Advanced Function → Device Parameter .

2. In the device list on the left, click

card reader's parameters on the right.

3. Edit the card reader basic parameters in the Basic Information page.

to expand the door, select a card reader and you can edit the

● The displayed parameters may vary for different access control devices. There are part of

parameters listed as follows. Refer to the user manual of the device for more details.

● Some of the following parameters are not listed in the Basic Information page, click More to

Note

edit the parameters.

Name

Edit the card reader name as desired.

OK LED Polarity/Error LED Polarity/Buzzer Polarity

Set OK LED Polarity/Error LED Polarity/Buzzer LED Polarity of main board according to the

card reader parameters. Generally, adopts the default settings.

Minimum Card Swiping Interval

If the interval between card swiping of the same card is less than the set value, the card

swiping is invalid. You can set it as 0 to 255.

Max. Interval When Entering PWD

When you inputting the password on the card reader, if the interval between pressing two

digits is larger than the set value, the digits you pressed before will be cleared automatically.

Alarm of Max. Failed Attempts

Enable to report alarm when the card reading attempts reach the set value.

Max. Times of Card Failure

Set the max. failure attempts of reading card.

Tampering Detection

Enable the anti-tamper detection for the card reader.

Communicate with Controller Every

When the access control device cannot connect with the card reader for longer than the set

time, the card reader will turn offline automatically.

Buzzing Time

Set the card reader buzzing time. The available time ranges from 0 to 5,999s. 0 represents

continuous buzzing.

Card Reader Type/Card Reader Description

Get card reader type and description. They are read-only.

Fingerprint Recognition Level

133

DS-K1T673 Series Face Recognition Terminal User Manual

Select the fingerprint recognition level in the drop-down list.

Default Card Reader Authentication Mode

View the default card reader authentication mode.

Fingerprint Capacity

View the maximum number of available fingerprints.

Existing Fingerprint Number

View the number of existed fingerprints in the device.

Score

The device will score the captured picture according to the yaw angle, pitch angle, and

pupillary distance. If the score is less than the configured value, face recognition will be failed.

Face Recognition Timeout Value

Face Recognition Interval

Face 1:1 Matching Threshold

If the recognition time is more than the configured time, the device will remind you.

The time interval between two continuous face recognitions when authenticating. By default,

it is 2s.

Set the matching threshold when authenticating via 1:1 matching mode. The larger the value,

the smaller the false accept rate and the larger the false rejection rate when authentication.

1:N Security Level

Live Face Detection

Set the matching security level when authenticating via 1:N matching mode. The larger the

value, the smaller the false accept rate and the larger the false rejection rate when

authentication.

Enable or disable the live face detection function. If enabling the function, the device can

recognize whether the person is a live one or not.

Live Face Detection Security Level

After enabling Live Face Detection function, you can set the matching security level when

performing live face authentication.

Max. Failed Attempts for Face Auth.

Set the maximum live face detection failed attempts. The system will lock the user's face for 5

minutes if the live face detection is failed for more than the configured attempts. The same

user cannot authenticate via the fake face within 5 minutes. Within the 5 minutes, the user

can authenticate via the real face twice continuously to unlock.

Lock Authentication Failed Face

After enabling the Live Face Detection function, the system will lock the user's face for 5

minutes if the live face detection is failed for more than the configured attempts. The same

134

DS-K1T673 Series Face Recognition Terminal User Manual

user cannot authenticate via the fake face within 5 minutes. Within the 5 minutes, the user

can authenticate via the real face twice continuously to unlock.

Application Mode

You can select indoor or others application modes according to actual environment.

4. Click OK.

5. Optional: Click Copy to, and then select the card reader(s) to copy the parameters in the page to

the selected card reader(s).

Configure Parameters for Alarm Output

After adding the access control device, if the device links to alarm outputs, you can configure the

parameters.

Before You Start

Add access control device to the client, and make sure the device supports alarm output.

Steps

1. Click Access Control → Advanced Function → Device Parameter to enter access control

to expand the door, select an alarm input and you can edit

parameter configuration page.

2. In the device list on the left, click

the alarm input's parameters on the right.

3. Set the alarm output parameters.

Name

Edit the card reader name as desired.

Alarm Output Active Time

How long the alarm output will last after triggered.

4. Click OK.

5. Optional: Set the switch on the upper right corner to ON to trigger the alarm output.

Configure Parameters for Lane Controller

After adding the lane controller to the client, you can configure its parameters for passing through

the lane.

Before You Start

Add access control device to the client.

Steps

1. Click Access Control → Advanced Function → Device Parameter to enter Parameter Settings

2. In the device list on the left, select a lane controller and you can edit the lane controller's

page.

parameters on the right.

3. Edit the parameters.

135

DS-K1T673 Series Face Recognition Terminal User Manual

Passing Mode

Select the controller which will control the barrier status of the device.

●

●

If you select According to Lane Controller's DIP Settings, the device will follow the lane

controller's DIP settings to control the barrier. The settings on the software will be invalid.

If you select According to Main Controller's Settings, the device will follow the settings of

the software to control the barrier. The DIP settings of the lane controller will be invalid.

Free Passing Authentication

If you enable this function, when both entrance and exit's barrier mode is Remain Open, the

pedestrians should authenticate each time passing through the lane. Or an alarm will be

triggered.

Opening/Closing Barrier Speed

Set the barrier's opening and closing speed. You can select from 1 to 10. The greater the

value, the faster the speed.

The recommended value is 6.

Audible Prompt Duration

Note

Note

Set how long the audio will last, which is played when an alarm is triggered .

0 refers to the alarm audio will be played until the alarm is ended.

Temperature Unit

4. Click OK.

Select the temperature unit that displayed in the device status.

9.7.2 Configure Device Parameters

After adding the access control device, you can set its parameters such as network parameters.

Set Parameters for Face Recognition Terminal

For face recognition terminal, you can set its parameters including face picture database, QR code

authentication, etc.

Steps

Note

This function should be supported by the device.

1. Enter the Access Control module.

136

DS-K1T673 Series Face Recognition Terminal User Manual

2. On the navigation bar on the left, enter Advanced Function → More Parameters .

3. Select an access control device in the device list and click Face Recognition Terminal.

4. Set the parameters.

These parameters displayed vary according to different device models.

Note

COM

Select a COM port for configuration. COM1 refers to the RS-485 interface and COM2 refers to

the RS-232 interface.

Face Picture Database

Authenticate by QR Code

select Deep Learning as the face picture database.

If enabled, the device camera can scan the QR code to authenticate. By default, the function

is disabled.

Blocklist Authentication

If enabled, the device will compare the person who want to access with the persons in the

blocklist.

If matched (the person is in the blocklist), the access will be denied and the device will upload

an alarm to the client.

If mismatched (the person is not in the blocklist), the access will be granted.

If enabled, the captured face picture when authenticating will be saved on the device.

Save Authenticating Face Picture

MCU Version

5. Click Save.

View the device MCU version.

Set RS-485 Parameters

You can set the access control device's RS-485 parameters including the baud rate, data bit, the

stop bit, parity type, flow control type, communication mode, work mode, and connection mode.

Before You Start

Add access control device to the client, and make sure the device supports RS-485 interface.

Steps

1. Enter the Access Control module.

2. On the navigation bar on the left, enter Advanced Function → More Parameters .

3. Select an access control device in the device list and click RS-485 to enter the RS-485 Settings

page.

4. Select the serial port number from the drop-down list to set the RS-485 parameters.

137

DS-K1T673 Series Face Recognition Terminal User Manual

5. Set the baud rate, data bit, the stop bit, parity type, communication mode, working mode, and

connection mode in the drop-down list.

When the connection mode is Connect Access Control Device, you can select Card No. or

Person ID as the output type.

● The configured parameters will be applied to the device automatically.

● When you change the working mode or connection mode, the device will reboot

Note

6. Click Save.

automatically.

Set Wiegand Parameters

You can set the access control device's Wiegand channel and the communication mode. After

setting the Wiegand parameters, the device can connect to Wiegand card reader via Wiegand

communication.

Before You Start

Add access control device to the client, and make sure the device supports Wiegand.

Steps

1. Enter the Access Control module.

2. On the navigation bar on the left, enter Advanced Function → More Parameters .

3. Select an access control device in the device list and click Wiegand to enter the Wiegand

4. Set the switch to on to enable the Wiegand function for the device.

5. Select the Wiegand channel No. and the communication mode from the drop-down list.

If you set Communication Direction as Sending, you are required to set the Wiegand Mode as

Wiegand 26 or Wiegand 34.

● The configured parameters will be applied to the device automatically.

● After changing the communication direction, the device will reboot automatically.

Enable M1 Card Encryption

M1 card encryption can improve the security level of authentication.

Settings page.

Note

6. Click Save.

Steps

Note

The function should be supported by the access control device and the card reader.

138

DS-K1T673 Series Face Recognition Terminal User Manual

1. Enter the Access Control module.

2. On the navigation bar on the left, enter Advanced Function → More Parameters .

3. Select an access control device in the device list and click M1 Card Encryption to enter the M1

Card Encryption page.

4. Set the switch to on to enable the M1 card encryption function.

5. Set the sector ID.

The sector ID ranges from 1 to 100.

6. Click Save to save the settings.

9.8 Door/Elevator Control

In Monitoring module, you can view the real-time status of the doors or elevators managed by the

added access control device. You can also control the doors and elevators such as open/close the

door, or remain the door open/closed via the client remotely. The real-time access event are

displayed in this module. You can view the access details and person details.

Note

For the user with door/elevator control permission, the user can enter the Monitoring module and

control the door/elevator. Or the icons used for control will not show. For setting the user

permission, refer to .

9.8.1 Control Door Status

You can control the status for the door(s), including unlock door, locking door, remaining the door

unlock, remaining the door locked, remain all unlocked, etc.

Before You Start

● Add person and assign access authorization to designed person, and person will have the access

authorization to the access points (doors). For details, refer to Person Management and Set

Access Group to Assign Access Authorization to Persons .

● Make sure the operation user has the permission of the access points (doors). For details, refer

Steps

1. Click Monitoring to enter the status monitoring page.

2. Select an access point group on the upper-right corner.

to .

Note

For managing the access point group, refer to Group Management .

The doors in the selected access control group will display.

3. Click a door icon to select a door, or press Ctrl and select multiple doors.

139

DS-K1T673 Series Face Recognition Terminal User Manual

For Remain All Unlocked and Remain All Locked, ignore this step.

4. Click the following buttons to control the door.

Note

Unlock

Lock

Remain Unlocked

Remain Locked

Remain All Unlocked

Remain All Locked

When the door is locked, unlock it and it will be open for once. After the open duration, the

door will be closed and locked again automatically.

When the door is unlocked, lock it and it will be closed. The person who has the access

authorization can access the door with credentials.

The door will be unlocked (no matter closed or open). All the persons can access the door

with no credentials required.

The door will be closed and locked. No person can access the door even if he/she has the

authorized credentials, except the super users.

All doors in the group will be unlocked (no matter closed or open). All the persons can access

the doors with no credentials required.

All doors in the group will be closed and locked. No person can access the doors even if

he/she has the authorized credentials, except the super users.

Capture

Capture a picture manually.

Note

Result

The Capture button is available when the device supports capture function. The picture is

saved in the PC running the client. For setting the saving path, refer to .

The icon of the doors will change in real-time according to the operation if the operation is

succeeded.

9.8.2 Check Real-Time Access Records

The real-time access records can be displayed in the client, including card swiping records, face

recognition records, skin-surface temperature information, etc. Also, you can view the person

information and view the picture captured during access.

140

DS-K1T673 Series Face Recognition Terminal User Manual

Before You Start

You have added person(s) and access control device(s) to the client. For details, refer to Person

Management and Add Device .

Steps

1. Click Monitoring to enter monitoring module.

Real-time access records are displayed on the bottom of the page. You can view record details,

including card No., person name, event time, door location, temperature, authentication type

etc.

Figure 9-5 Real-time Access Records

Note

Note

Note

You can right click the column name of access event table to show or hide the column according

to actual needs.

2. Optional: Select an access point group from the drop-down list in the upper-right corner to

show the real time access records of the selected group.

3. Optional: Check the event type and event status.

The detected events of checked type and status will be displayed in the list below.

4. Optional: Check Show Latest Event to view the latest access record.

The record list will be listed reverse chronologically.

5. Optional: Check Enable Abnormal Temperature Prompt to enable abnormal skin-surface

temperature prompt.

When enabled, if there is abnormal temperature information, an Abnormal Temperature

window pops up when you enter Monitoring module, displaying person's picture, skin-surface

temperature, card No., person name, etc.

6. Optional: Click an event to view person pictures (including captured picture and profile).

In Linked Capture Picture field, you can double click the captured picture to view an enlarged

picture.

141

DS-K1T673 Series Face Recognition Terminal User Manual

to view surveillance details (including person's detailed information and the

7. Optional: Click

captured picture).

Note

In the pop-up window, you can click

to view surveillance details in full screen.

142

DS-K1T673 Series Face Recognition Terminal User Manual

Appendix A. Tips for Scanning Fingerprint

Recommended Finger

Forefinger, middle finger or the third finger.

Correct Scanning

The figure displayed below is the correct way to scan your finger:

You should press your finger on the scanner horizontally. The center of your scanned finger should

align with the scanner center.

Incorrect Scanning

The figures of scanning fingerprint displayed below are incorrect:

143

DS-K1T673 Series Face Recognition Terminal User Manual

Environment

The scanner should avoid direct sun light, high temperature, humid conditions and rain.

When it is dry, the scanner may not recognize your fingerprint successfully. You can blow your

finger and scan again.

Others

If your fingerprint is shallow, or it is hard to scan your fingerprint, we recommend you to use other

authentication methods.

If you have injuries on the scanned finger, the scanner may not recognize. You can change another

finger and try again.

144

DS-K1T673 Series Face Recognition Terminal User Manual

Appendix B. Tips When Collecting/Comparing Face

Picture

The position when collecting or comparing face picture is as below:

Positions (Recommended Distance: 0.3 m)

Expression

● Keep your expression naturally when collecting or comparing face pictures, just like the

expression in the picture below.

● Do not wear hat, sunglasses, or other accessories that can affect the facial recognition function.

● Do not make your hair cover your eyes, ears, etc. and heavy makeup is not allowed.

Posture

In order to get a good quality and accurate face picture, position your face looking at the camera

when collecting or comparing face pictures.

145

DS-K1T673 Series Face Recognition Terminal User Manual

Size

Make sure your face is in the middle of the collecting window.

146

DS-K1T673 Series Face Recognition Terminal User Manual

Appendix C. Tips for Installation Environment

1. Light Source Illumination Reference Value

Candle: 10Lux

Bulb: 100~850Lux

Sunlight: More than 1200Lux

2. Avoid backlight, direct and indirect sunlight

147

DS-K1T673 Series Face Recognition Terminal User Manual

Appendix D. Dimension

148

DS-K1T673 Series Face Recognition Terminal User Manual

Appendix E. Communication Matrix and Device

Command

Communication Matrix

Scan the following QR code to get the device communication matrix.

Note that the matrix contains all communication ports of Hikvision access control and video

intercom devices.

Figure E-1 QR Code of Communication Matrix

Device Command

Scan the following QR code to get the device common serial port commands.

Note that the command list contains all commonly used serial ports commands for all Hikvision

access control and video intercom devices.

Figure E-2 Device Command

149

UD24660B-A



 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

a)

b)

c)

d)

e)

f)

g)

SGS North America Inc.

620 Old Peachtree Road

SUITE 100

Suwanee, Georgia 30024

United States

Applicant Declaration

Applicant Legal Business Name

Hangzhou Hikvision Digital Technology Co., Ltd.

No. 555 Qianmo Road, Binjiang District Hangzhou 310052, China

Address

Grantee Code

FCC ID

Contact Email

Contact Phone

Authorized Contact Name

Long Cheng

2ADTD

2ADTD-K1T673TDWX

chenglong6@hikvision.com

+8618969187825

I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my

knowledge and belief.

in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in

this application, the Applicant is responsible for:

labeling the equipment with the exact FCC ID as specified in this application,

(1)

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules,

if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure

that production units of this equipment will continue to comply with the FCC’s technical requirements.

in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible

party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321.

in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts

and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3)

the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing.

the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED.

the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS,

FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or

software required for evaluation, review, certification and audit surveillance of products certified by SGS.

neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section

5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See

47CFR 1.2002(b) for the definition of a “party” for these purposes.

the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions.

Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47

Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm

Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html

Date:2021/09/01

Applicant Signature:

Print Name:

Title:

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Long Cheng

Testing & Certification Engineer

Applicant Declaration

Rev:0.0



 

 

Hangzhou Hikvision Digital Technology Co., Ltd. TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Date: 2021-09-01 Regarding: FCC ID: 2ADTD-K1T673TDWX To whom it may concern:

We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Hangzhou Hikvision Digital Technology Co., Ltd. This authorization is valid until further written notice from the applicant. Name (Printed): Long Cheng Signature:

On behalf of Company: Hangzhou Hikvision Digital Technology Co., Ltd. Telephone: +8618969187825 Title: Testing & Certification Engineer

 

 

Confidentiality Request regarding application for FCC ID: 2ADTD-K1T673TDWX

SGS North America Inc.

620 Old Peachtree Road

SUITE 100

Suwanee, Georgia

United States

Hangzhou Hikvision Digital Technology Co., Ltd.

To:

From: Hangzhou Hikvision Digital Technology Co., Ltd.

No. 555 Qianmo Road, Binjiang District,

angzhou 310052, China

Regarding:

LONG TERM CONFIDENTIALITY

Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request

confidential treatment of the documents listed below, associated with the certification application

referenced above.

Schematic(s)

Block Diagrams

Operational Descriptions

The documents above contain proprietary information not released to the public. Public disclosure of this

information may prove harmful to the business of the applicant.

Sincerely,

Signature:

Printed Name (on file with the FCC associated with the Grantee Code): Long Cheng

Title: Testing & Certification Engineer

Company Name: Hangzhou Hikvision Digital Technology Co., Ltd.



 

 

Hangzhou Hikvision Digital Technology Co., Ltd.

Current Date : 2021-09-01

To:

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd.

No. 588 West Jindu Road, Songjiang District, Shanghai, China. 201612

Dear Sir/Madam,

Subject: Declaration Letter about Identity of Products

*WE (Hangzhou Hikvision Digital Technology Co., Ltd.) HEREBY DECLARED THAT

Product Description

Face Recognition Terminal

Model No.

DS-K1T673DWX,DS-K1T673DWUHK,DS-K1T673DWCKV,DS-K1T673DW

UVS,DS-K1T673DWKVO,DS-K1T673DWHUN,DS-K1T673TDWUHK,DS-K

1T673TDWCKV,DS-K1T673TDWUVS,DS-K1T673TDWKVO ,DS-K1T673T

DWHUN

Manufacturer’s Name Hangzhou Hikvision Digital Technology Co., Ltd.

Manufacturer’s Address

No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China

*Except that the model number and appearance deviation, are identical with the original product as

follows:

Note: The definition of identical should be “electrically identical”. A device will be considered to be

electrically identical if no changes are made to the devices’ schematics, board layouts, component

layouts, chip sets, resistors and all other electrical aspects of the device are identical.

Model No. (型号):

DS-K1T673TDWX

Manufacturer’s Name (生产商名称):

Hangzhou Hikvision Digital Technology Co., Ltd.

Manufacturer’s Address（生产商商地址):

No.555 Qianmo Road, Binjiang District, Hangzhou

Sincerely,

Signature (签字):

310052, China

Printed Name (姓名):

Long Cheng

Position/Title (职位):

Testing & Certification Engineer

Contact Number (联系电话):

+8618969187825