all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 |
|
User Manual | Users Manual | 4.44 MiB | September 13 2022 | |||
1 2 3 |
|
Internal photo | Internal Photos | 2.49 MiB | September 13 2022 | |||
1 2 3 |
|
External photo | External Photos | 866.67 KiB | September 13 2022 | |||
1 2 3 |
|
Label | ID Label/Location Info | 235.00 KiB | September 13 2022 | |||
1 2 3 |
|
Antenna Specification | Test Report | 103.29 KiB | September 13 2022 | |||
1 2 3 |
|
Applicant Declaration Letter | Cover Letter(s) | 217.28 KiB | September 13 2022 | |||
1 2 3 |
|
Auth letter | Cover Letter(s) | 116.17 KiB | September 13 2022 | |||
1 2 3 | Blockdiagram unit | Block Diagram | September 13 2022 | confidential | ||||
1 2 3 | Bolckdiagram RF | Block Diagram | September 13 2022 | confidential | ||||
1 2 3 |
|
Confidentiality FCC | Cover Letter(s) | 139.74 KiB | September 13 2022 | |||
1 2 3 |
|
Declaration Letter for Function Limited Use | Attestation Statements | 162.76 KiB | September 13 2022 | |||
1 2 3 |
|
MCL | Cover Letter(s) | 128.37 KiB | September 13 2022 | |||
1 2 3 |
|
MPE | RF Exposure Info | 835.74 KiB | September 13 2022 | |||
1 2 3 | Operational description | Operational Description | September 13 2022 | confidential | ||||
1 2 3 | Schematics RF | Schematics | September 13 2022 | confidential | ||||
1 2 3 | Schematics unit | Schematics | September 13 2022 | confidential | ||||
1 2 3 |
|
Test Setup photo | Test Setup Photos | 1.05 MiB | September 13 2022 | |||
1 2 3 |
|
Test report | Test Report | 1.49 MiB | September 13 2022 |
1 2 3 | User Manual | Users Manual | 4.44 MiB | September 13 2022 |
DS-K1T681 Series Face Recognition Terminal User Manual DS-K1T681 Series Face Recognition Terminal User Manual Legal Information 2021 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website ( https://
www.hikvision.com/ )company website. Please use this Manual with the guidance and assistance of professionals trained in supporting the Product. Trademarks and other Hikvision's trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned are the properties of their respective owners. Trademarks and logos mentioned are the properties of their respective owners. Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED "AS IS" AND "WITH ALL FAULTS AND ERRORS". HIKVISIONOUR COMPANY MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISIONOUR COMPANY BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISIONOUR COMPANY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISIONOUR COMPANY SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISIONOUR COMPANY WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF i DS-K1T681 Series Face Recognition Terminal User Manual PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATTER PREVAILS. Data Protection During the use of device, personal data will be collected, stored and processed. To protect data, the development of Hikvisionour devices incorporates privacy by design principles. For example, for device with facial recognition features, biometrics data is stored in your device with encryption method; for fingerprint device, only fingerprint template will be saved, which is impossible to reconstruct a fingerprint image. As data controller, you are advised to collect, store, process and transfer data in accordance with the applicable data protection laws and regulations, including without limitation, conducting security controls to safeguard personal data, such as, implementing reasonable administrative and physical security controls, conduct periodic reviews and assessments of the effectiveness of your security controls. ii DS-K1T681 Series Face Recognition Terminal User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Danger Caution Note Indicates a hazardous situation which, if not avoided, will or could result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results. Provides additional information to emphasize or supplement important points of the main text. iii DS-K1T681 Series Face Recognition Terminal User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body. FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE"
and comply therefore with the applicable harmonized European standards listed iv DS-K1T681 Series Face Recognition Terminal User Manual under the EMC Directive 2014/30/EU, RE Directive 2014/53/EU,the RoHS Directive 2011/65/EU 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see:
www.recyclethis.info 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury
(Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see:www.recyclethis.info v DS-K1T681 Series Face Recognition Terminal User Manual Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into Dangers and Cautions:
Dangers: Neglecting any of the warnings may cause serious injury or death. Cautions: Neglecting any of the cautions may cause injury or equipment damage. Dangers: Follow these safeguards to prevent serious injury or death. Cautions: Follow these precautions to prevent potential injury or material damage. Danger:
In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region. CAUTION: To reduce the risk of fire, replace only with the same type and rating of fuse. CAUTION: This equipment is for use only with Hikvisions bracket. Use with other (carts, stands, or carriers) may result in instability causing injury. To prevent possible hearing damage, do not listen at high volume levels for long periods. Please use the power adapter, which is provided by normal company. The power consumption cannot be less than the required value. Do not connect several devices to one power adapter as adapter overload may cause over-heat or fire hazard. Please make sure that the power has been disconnected before you wire, install or dismantle the device. When the product is installed on wall or ceiling, the device shall be firmly fixed. If smoke, odors or noise rise from the device, turn off the power at once and unplug the power cable, and then please contact the service center. If the product does not work properly, please contact your dealer or the nearest service center. Never attempt to disassemble the device yourself. (We shall not assume any responsibility for problems caused by unauthorized repair or maintenance.) Cautions:
+ identifies the positive terminal(s) of equipment which is used with, or generates direct current.
+ identifies the negative terminal(s) of equipment which is used with, or generates direct current. No naked flame sources, such as lighted candles, should be placed on the equipment. The USB port of the equipment is used for connecting to a USB flash drive only. The serial port of the equipment is used for debugging only. vi DS-K1T681 Series Face Recognition Terminal User Manual Burned fingers when handling the fingerprint sensor metal. Wait one-half hour after switching off before handling the parts. Install the equipment according to the instructions in this manual. To prevent injury, this equipment must be securely attached to the floor/wall in accordance with the installation instructions. Do not drop the device or subject it to physical shock, and do not expose it to high electromagnetism radiation. Avoid the equipment installation on vibrations surface or places subject to shock (ignorance can cause equipment damage). Do not place the device in extremely hot (refer to the specification of the device for the detailed operating temperature), cold, dusty or damp locations, and do not expose it to high electromagnetic radiation. Exposing the equipment to direct sun light, low ventilation or heat source such as heater or radiator is forbidden (ignorance can cause fire danger). Do not aim the device at the sun or extra bright places. A blooming or smear may occur otherwise (which is not a malfunction however), and affecting the endurance of sensor at the same time. Please use the provided glove when open up the device cover, avoid direct contact with the device cover, because the acidic sweat of the fingers may erode the surface coating of the device cover. Please use a soft and dry cloth when clean inside and outside surfaces of the device cover, do not use alkaline detergents. Please keep all wrappers after unpack them for future use. In case of any failure occurred, you need to return the device to the factory with the original wrapper. Transportation without the original wrapper may result in damage on the device and lead to additional costs. Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or equivalent type only. Dispose of used batteries according to the instructions provided by the battery manufacturer. Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher security level, use multiple authentication modes. Please make sure that the biometric recognition accuracy will be affected by the collected pictures' quality and the light in the environment, which cannot be 100% correct. vii DS-K1T681 Series Face Recognition Terminal User Manual Available Models Product Name Model Wireless Face Recognition Terminal DS-K1T681DBX DS-K1T681DBWX Product Name: Face Recognition Terminal Use only power supplies listed in the user instructions:
13.56 MHz Card Presenting Frequency, Bluetooth 13.56 MHz Card Presenting Frequency, 2.4G Wi-Fi, Bluetooth Model Manufacturer Standard ADS-26FSG-12 12024EPG Shenzhen Honor Electronic Co.,Ltd MSA-C2000IC12.0-24P-DE MOSO Technology Co.,Ltd ADS-26FSG-12 12024EPB Shenzhen Honor Electronic Co.,Ltd PG PDE PB ADS-26FSG-12 12024EPCU/EPC Shenzhen Honor Electronic PCU ADS-26FSG-12 12024EPI-01 ADS-26FSG-12 12024EPBR Co.,Ltd Shenzhen Honor Electronic Co.,Ltd Shenzhen Honor Electronic Co.,Ltd PI PBR viii DS-K1T681 Series Face Recognition Terminal User Manual Contents Chapter 1 Overview .................................................................................................................... 1 1.1 Overview ................................................................................................................................ 1 1.2 Features ................................................................................................................................. 1 Chapter 2 Appearance ................................................................................................................ 2 Chapter 3 Installation ................................................................................................................. 4 3.1 Installation Environment ........................................................................................................ 4 3.2 Flush Mounting with Gang Box .............................................................................................. 4 3.3 Surface Mounting .................................................................................................................. 6 Chapter 4 Wiring ...................................................................................................................... 10 4.1 Terminal Description ............................................................................................................ 10 4.2 Wire Normal Device ............................................................................................................. 12 4.3 Wire Secure Door Control Unit ............................................................................................ 13 4.4 Wire Fire Module ................................................................................................................. 14 4.4.1 Wiring Diagram of Door Open When Powering Off .................................................... 14 4.4.2 Wiring Diagram of Door Locked When Powering Off .................................................. 16 Chapter 5 Activation ................................................................................................................. 19 5.1 Activate via Device ............................................................................................................... 19 5.2 Activate via Web Browser .................................................................................................... 21 5.3 Activate via SADP ................................................................................................................. 21 5.4 Activate Device via Client Software ...................................................................................... 22 Chapter 6 Quick Operation ....................................................................................................... 24 6.1 Select Language ................................................................................................................... 24 6.2 Set Password Change Type ................................................................................................... 25 6.3 Set Application Mode .......................................................................................................... 26 6.4 Set Network Parameters ...................................................................................................... 28 6.5 Access to Platform ............................................................................................................... 30 ix DS-K1T681 Series Face Recognition Terminal User Manual 6.6 Privacy Settings .................................................................................................................... 32 6.7 Set Administrator ................................................................................................................. 33 Chapter 7 Basic Operation ........................................................................................................ 36 7.1 Login .................................................................................................................................... 36 7.1.1 Login by Administrator ................................................................................................ 36 7.1.2 Login by Activation Password ...................................................................................... 39 7.1.3 Forgot Password .......................................................................................................... 40 7.2 Communication Settings ...................................................................................................... 42 7.2.1 Set Wired Network Parameters .................................................................................. 42 7.2.2 Set Wi-Fi Parameters ................................................................................................... 43 7.2.3 Set RS-485 Parameters ................................................................................................ 45 7.2.4 Set Wiegand Parameters ............................................................................................. 46 7.2.5 Set ISUP Parameters .................................................................................................... 47 7.2.6 Platform Access ........................................................................................................... 49 7.3 User Management ............................................................................................................... 50 7.3.1 Add Administrator ....................................................................................................... 50 7.3.2 Add Face Picture ......................................................................................................... 51 7.3.3 Add Fingerprint ........................................................................................................... 53 7.3.4 Add Card ..................................................................................................................... 54 7.3.5 View Password ............................................................................................................ 55 7.3.6 Set Authentication Mode ............................................................................................ 56 7.3.7 Search and Edit User ................................................................................................... 56 7.4 Data Management ............................................................................................................... 57 7.4.1 Delete Data ................................................................................................................. 57 7.4.2 Import Data ................................................................................................................. 57 7.4.3 Export Data ................................................................................................................. 58 7.5 Identity Authentication ........................................................................................................ 58 x DS-K1T681 Series Face Recognition Terminal User Manual 7.5.1 Authenticate via Single Credential .............................................................................. 58 7.5.2 Authenticate via Multiple Credential .......................................................................... 59 7.6 Basic Settings ....................................................................................................................... 60 7.7 Set Biometric Parameters .................................................................................................... 61 7.8 Set Access Control Parameters ............................................................................................ 63 7.9 Time and Attendance Status Settings .................................................................................. 65 7.9.1 Disable Attendance Mode via Device ......................................................................... 65 7.9.2 Set Manual Attendance via Device ............................................................................. 66 7.9.3 Set Auto Attendance via Device .................................................................................. 67 7.9.4 Set Manual and Auto Attendance via Device .............................................................. 68 7.10 Preference Settings ............................................................................................................ 70 7.11 System Maintenance .......................................................................................................... 71 7.12 Video Intercom .................................................................................................................. 73 7.12.1 Call Client Software from Device ............................................................................... 73 7.12.2 Call Center from Device ............................................................................................ 74 7.12.3 Call Device from Client Software ............................................................................... 74 7.12.4 Call Room from Device .............................................................................................. 75 7.12.5 Call Mobile Client from Device .................................................................................. 75 7.12.6 Call Room from Device .............................................................................................. 76 Chapter 8 Operation via Web Browser ...................................................................................... 77 8.1 Login .................................................................................................................................... 77 8.2 Forget Password ................................................................................................................... 77 8.3 Live View .............................................................................................................................. 77 8.4 Person Management ............................................................................................................ 79 8.5 Search Event ........................................................................................................................ 80 8.6 Configuration ....................................................................................................................... 80 8.6.1 Set Local Parameters ................................................................................................... 80 8.6.2 View Device Information ............................................................................................. 81 xi DS-K1T681 Series Face Recognition Terminal User Manual 8.6.3 Set Time ...................................................................................................................... 81 8.6.4 Set DST ........................................................................................................................ 82 8.6.5 View Open Source Software License ........................................................................... 82 8.6.6 Upgrade and Maintenance ......................................................................................... 82 8.6.7 Log Query .................................................................................................................... 84 8.6.8 Security Mode Settings ............................................................................................... 84 8.6.9 Certificate Management ............................................................................................. 85 8.6.10 Change Administrator's Password ............................................................................. 86 8.6.11 Account Security Settings .......................................................................................... 86 8.6.12 View Device Arming/Disarming Information ............................................................ 87 8.6.13 Network Settings ....................................................................................................... 87 8.6.14 Set Video and Audio Parameters .............................................................................. 90 8.6.15 Customize Audio Content ......................................................................................... 92 8.6.16 Set Image Parameters ............................................................................................... 93 8.6.17 Set Supplement Light Brightness .............................................................................. 94 8.6.18 Time and Attendance Settings .................................................................................. 94 8.6.19 General Settings ........................................................................................................ 97 8.6.20 Video Intercom Settings .......................................................................................... 101 8.6.21 Access Control Settings ........................................................................................... 103 8.6.22 Set Biometric Parameters ....................................................................................... 106 8.6.23 Set Theme ............................................................................................................... 110 Chapter 9 Client Software Configuration ................................................................................. 112 9.1 Configuration Flow of Client Software ............................................................................... 112 9.2 Device Management .......................................................................................................... 113 9.2.1 Add Device ................................................................................................................ 113 9.2.2 Reset Device Password ............................................................................................. 128 9.3 Group Management ........................................................................................................... 128 9.3.1 Add Group ................................................................................................................. 129 xii DS-K1T681 Series Face Recognition Terminal User Manual 9.3.2 Import Resources to Group ....................................................................................... 129 9.3.3 Edit Resource Parameters ......................................................................................... 130 9.3.4 Remove Resources from Group ................................................................................ 131 9.4 Person Management .......................................................................................................... 131 9.4.1 Add Organization ...................................................................................................... 131 9.4.2 Configure Basic Information ..................................................................................... 132 9.4.3 Issue a Card by Local Mode ....................................................................................... 133 9.4.4 Upload a Face Photo from Local PC .......................................................................... 135 9.4.5 Take a Photo via Client .............................................................................................. 135 9.4.6 Collect Face via Access Control Device ..................................................................... 136 9.4.7 Collect Fingerprint via Client ..................................................................................... 137 9.4.8 Collect Fingerprint via Access Control Device ........................................................... 138 9.4.9 Configure Access Control Information ...................................................................... 138 9.4.10 Customize Person Information ................................................................................ 140 9.4.11 Configure Resident Information .............................................................................. 141 9.4.12 Configure Additional Information ........................................................................... 141 9.4.13 Import and Export Person Identify Information ...................................................... 142 9.4.14 Import Person Information ..................................................................................... 142 9.4.15 Import Person Pictures ........................................................................................... 143 9.4.16 Export Person Information ...................................................................................... 143 9.4.17 Export Person Pictures ............................................................................................ 144 9.4.18 Get Person Information from Access Control Device .............................................. 144 9.4.19 Move Persons to Another Organization .................................................................. 145 9.4.20 Issue Cards to Persons in Batch ............................................................................... 145 9.4.21 Report Card Loss ..................................................................................................... 145 9.4.22 Set Card Issuing Parameters .................................................................................... 146 9.5 Configure Schedule and Template ..................................................................................... 147 9.5.1 Add Holiday ............................................................................................................... 147 xiii DS-K1T681 Series Face Recognition Terminal User Manual 9.5.2 Add Template ............................................................................................................ 148 9.6 Set Access Group to Assign Access Authorization to Persons ............................................ 149 9.7 Configure Advanced Functions .......................................................................................... 152 9.7.1 Configure Device Parameters .................................................................................... 152 9.7.2 Configure Remaining Open/Closed ........................................................................... 157 9.7.3 Configure Multi-Factor Authentication ..................................................................... 158 9.7.4 Configure Card Reader Authentication Mode and Schedule .................................... 160 9.7.5 Configure First Person In ........................................................................................... 164 9.7.6 Configure Anti-Passback ........................................................................................... 165 9.7.7 Configure Multi-door Interlocking ............................................................................ 166 9.7.8 Configure Device Parameters .................................................................................... 166 9.8 Configure Linkage Actions for Access Control .................................................................... 172 9.8.1 Configure Client Actions for Access Event ................................................................. 173 9.8.2 Configure Device Actions for Access Event ............................................................... 174 9.8.3 Configure Device Actions for Card Swiping ............................................................... 174 9.8.4 Configure Device Actions for Person ID .................................................................... 175 9.9 Door Control ...................................................................................................................... 176 9.9.1 Control Door Status ................................................................................................... 177 9.9.2 Check Real-Time Access Records .............................................................................. 178 9.10 Event Center .................................................................................................................... 178 9.10.1 Enable Receiving Event from Devices ..................................................................... 178 9.10.2 View Real-Time Events ............................................................................................ 179 9.10.3 Search Historical Events .......................................................................................... 181 9.11 Time and Attendance ....................................................................................................... 184 9.11.1 Configure Attendance Parameters .......................................................................... 184 9.11.2 Add General Timetable ........................................................................................... 189 9.11.3 Add Shift .................................................................................................................. 193 9.11.4 Manage Shift Schedule ........................................................................................... 198 xiv DS-K1T681 Series Face Recognition Terminal User Manual 9.11.5 Manually Correct Check-in/out Record ................................................................... 201 9.11.6 Add Leave and Business Trip ................................................................................... 202 9.11.7 Calculate Attendance Data ...................................................................................... 203 9.11.8 Attendance Statistics .............................................................................................. 204 Appendix A. Tips for Scanning Fingerprint ............................................................................... 208 Appendix B. Tips When Collecting/Comparing Face Picture .................................................... 210 Appendix C. Tips for Installation Environment ........................................................................ 212 Appendix D. Dimension .......................................................................................................... 213 Appendix E. Communication Matrix and Device Command ..................................................... 215 xv DS-K1T681 Series Face Recognition Terminal User Manual Chapter 1 Overview 1.1 Overview Face recognition terminal is a kind of access control device for face recognition, which is mainly applied in security access control systems, such as logistic centers, airports, university campuses, alarm centrals, dwellings, etc. 1.2 Features 8-inch touch screen with bezel-less design Presents card on the screen to authenticate card permission. 2 MP wide-angle dual-lens Face anti-spoofing Face recognition distance: 0.3 m to 3 m Deep learning algorithm Up to 100,000 face capacity, 100,000 card capacity, and 150,000 event capacity Face recognition duration 0.2 s/User; face recognition accuracy rate 99%
Capture linkage and captured pictures storage Transmits card and user data from or to the client software via TCP/IP protocol and saves the data on the client software Imports pictures from the USB flash drive to the device or export pictures, events, from the device to the USB flash drive Stand-alone operation Manage, search and set device data after logging in the device locally Connects to one external card reader via RS-485 protocol Connects to secure door control unit via RS-485 protocol to avoid the door opening when the terminal is destroyed Connects to external access controller or Wiegand card reader via Wiegand protocol Two-way audio with indoor station and main station Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out Configuration via the web client Remotely opens door and starts live view via Hik-Connect Remotely opens door and starts live view via Guarding Vision Supports ISAPI and ISUP 5.0 protocol Supports multiple languages: English, Thai, Portuguese, Russian, Spanish, Arabic, Japanese, Ukrainian, and Indonesian Self-defined voice prompt of authentication result 1 DS-K1T681 Series Face Recognition Terminal User Manual Chapter 2 Appearance Refer to the following contents for detailed information of the face recognition terminal:
1 2 3 4 5 6 7 Figure 2-1 Face Recognition Terminal Diagram Table 2-1 Description of Face Recognition Terminal No. Description microUSB Interface Note USB to micro USB cable is included in the package. Card Presenting Area Touch Screen IR Light Camera Camera IR Light 2 DS-K1T681 Series Face Recognition Terminal User Manual No. Description Fingerprint Module Debugging Port microSIM Card Slot Network Interface Note If the device supports PoE, the network interface supports power supply by PoE. If the device supports power supply by PoE and the network interface is connected, do not wire the power input terminal. Loudspeaker TAMPER Wiring Terminals 8 9 10 11 12 13 14 3 DS-K1T681 Series Face Recognition Terminal User Manual Chapter 3 Installation 3.1 Installation Environment Avoid backlight, direct sunlight, and indirect sunlight. For better recognition, there should be light source in or near the installation environment. If you have to install the device outdoors, you should install a protective shield (optional) for the device. Note For details about installation environment, see Tips for Installation Environment. 3.2 Flush Mounting with Gang Box Steps Note The gang box is optional. You should purchase it separately. 1. Remove the back sheet under the TAMPER button by removing the 2 screws. Secure the mounting plate on the base plate with 4 screws. Remove the sponge tage on the base plate and secure the device on the mounting plate with 2 screws. Figure 3-1 Secure the Device on the mounting plate 2. Secure the decoration plate on the base plate with 4 screws. Stick 3 waterproof membranes on the decoration plate as shown below. Route the cable through the cable hole of the plates, and connect to external device's cables. 4 DS-K1T681 Series Face Recognition Terminal User Manual Note The waterproof membranes is used only in the flush mounting. Figure 3-2 Secure the Decoration Plate on the Base Plate 3. Dig a hole (242 mm 114 mm 30.5 mm) on the wall. Place a gang box in the hole (a), and remove the 4 mounting ears with tool (b). Secure the combination and the gang box with 1 screw (c). 5 DS-K1T681 Series Face Recognition Terminal User Manual Figure 3-3 Secure the Combination and the Gang Box 4. After installation, for the proper use of the device (outdoor use), stick the protection film (parts of models supplied) on the screen. 3.3 Surface Mounting Steps Note The additional force shall be equal to three times the weight of the equipment. The equipment ad its associated mounting means shall remain secure during the installation. After the installation, the equipment, including any associated mounting plate, shall not be damaged. 1. According to the datum line on the mounting template, stick the mounting template on the wall or other surfaces, 1.4 meters higher than the ground. 6 DS-K1T681 Series Face Recognition Terminal User Manual Figure 3-4 Mounting Template 7 DS-K1T681 Series Face Recognition Terminal User Manual 2. Drill holes on the wall or other surface according to the Hole 1 and Hole 2 on the mounting template. 3. Remove the cable hole on the mounting plate with tools. 4. Align the holes to the mounting plate and secure the mounting plate on the wall with the 4 supplied screws (Pa425). Figure 3-5 Install Mounting Plate 5. Route the cable through the cable hole of the mounting plate, and connect to corresponding external devices' cables. 6. Align the device with the mounting plate and hang the device on the mounting plate. 8 DS-K1T681 Series Face Recognition Terminal User Manual 7. Use 2 supplied screw (KM36) to secure the device and the mounting plate. Figure 3-6 Hang Device Figure 3-7 Secure Device 8. After installation, for the proper use of the device (outdoor use), stick the protection film (parts of models supplied) on the screen. 9 DS-K1T681 Series Face Recognition Terminal User Manual Chapter 4 Wiring The device supports connecting to the RS-485 terminal, the door lock, the exit button, the alarm output/input devices, the Wiegand card reader, the access controller, and the power supply. You can wire the peripherals according to the descriptions below. If connect the Wiegand card reader with the access controller, the face recognition terminal can transmit the authentication information to the access controller and the access controller can judge whether to open the door or not. Note If the cable size is 18 AWG, you should use a 12 V switched-mode power supply. And the distance between the power supply and the device should be no more than 20 m. If the cable size is 15 AWG, you should use a 12 V switched-mode power supply. And the distance between the power supply and the device should be no more than 30 m. If the cable size is 12 AWG, you should use a 12 V switched-mode power supply. And the distance between the power supply and the device should be no more than 40 m. 4.1 Terminal Description The terminals contains power input, alarm input, alarm output, RS-485, Wiegand output, and door lock. The terminal's diagram is as follows:
10 DS-K1T681 Series Face Recognition Terminal User Manual The descriptions of the terminals are as follows:
Figure 4-1 Terminal Diagram Table 4-1 Terminal Descriptions Group No. Function Color Name Description Group A Group B A1 A2 B1 Power Input Red
+12 ~ 24 VDC Power Supply Black Alarm Input Yellow/Blue GND IN1 Ground Alarm Input 1 11 DS-K1T681 Series Face Recognition Terminal User Manual Group No. Function Color Name Description Group C Group D B2 B3 B4 B5 B6 C1 C2 C3 C4 C5 C6 D1 D2 D3 D4 D5 D6 Black GND Ground Yellow/Orange IN2 Alarm Output Yellow/Purple NC Yellow/Brown COM Yellow/Red NO RS-485 Wiegand Yellow Blue Black Green White Black 485+
485-
GND W0 W1 GND Door Lock White/Purple NC White/Yellow COM White/Red NO Alarm Input 2 Alarm Output Wiring RS-485 Wiring Ground Wiegand Wiring 0 Wiegand Wiring 1 Ground Lock Wiring
(NC) Common Lock Wiring
(NO) Yellow/Green SENSOR Door Contact Black Yellow/Gray GND BTN Ground Exit Door Wiring 4.2 Wire Normal Device You can connect the terminal with normal peripherals. 12 DS-K1T681 Series Face Recognition Terminal User Manual Figure 4-2 Device Wiring Note You should set the face recognition terminal's Wiegand direction as Input to connect to a Wiegand card reader. If connects to an access controller, you should set the Wiegand direction as Output to transmit authentication information to the access controller. For details about Wiegand direction settings, see Set Wiegand Parameters . Do not wire the device to the electric supply directly. 4.3 Wire Secure Door Control Unit You can connect the terminal with the secure door control unit. The wiring diagram is as follows. 13 DS-K1T681 Series Face Recognition Terminal User Manual Figure 4-3 Secure Door Control Unit Wiring Note The secure door control unit should connect to an external power supply separately. The suggested external power supply is 12V, 0.5A. For scenarios with high safety requirement, use the secure door control unit wiring first. You can ask the technical support to purchase for the secure door control unit separately. The picture here are parts of the wiring. For details, see the secure door control units user manual. 4.4 Wire Fire Module 4.4.1 Wiring Diagram of Door Open When Powering Off Lock Type: Anode Lock, Magnetic Lock, and Electric Bolt (NO) Security Type: Door Open When Powering Off Scenario: Installed in Fire Engine Access Type 1 Note The fire system controls the power supply of the access control system. 14 DS-K1T681 Series Face Recognition Terminal User Manual Figure 4-4 Wire Device Figure 4-5 Wire Secure Door Control Unit Type 2 Note The fire system (NO and COM, normally open when powering off) is connected with the lock and the power supply in series. When an fire alarm is triggered, the door remains open. In normal times, NO and COM are closed. 15 DS-K1T681 Series Face Recognition Terminal User Manual Figure 4-6 Wiring Device Figure 4-7 Wiring Secure Door Control Unit 4.4.2 Wiring Diagram of Door Locked When Powering Off Lock Type: Cathode Lock, Electric Lock, and Electric Bolt (NC) Security Type: Door Locked When Powering Off 16 DS-K1T681 Series Face Recognition Terminal User Manual Scenario: Installed in Entrance/Exit with Fire Linkage Note The Uninterpretable Power Supply (UPS) is required. The fire system (NC and COM, normally closed when powering off) is connected with the lock and the power supply in series. When an fire alarm is triggered, the door remains open. In normal times, NC and COM are open. Figure 4-8 Device Wiring 17 DS-K1T681 Series Face Recognition Terminal User Manual Figure 4-9 Wiring Diagram 18 DS-K1T681 Series Face Recognition Terminal User Manual Chapter 5 Activation You should activate the device before the first login. After powering on the device, the system will switch to Device Activation page. Activation via the device, SADP tool and the client software are supported. The default values of the device are as follows:
The default IP address: 192.0.0.64 The default port No.: 8000 The default user name: admin 5.1 Activate via Device If the device is not activated, you can activate the device after it is powered on. On the Activate Device page, create a password and confirm the password. Tap Activate and the device will activated. 19 DS-K1T681 Series Face Recognition Terminal User Manual Figure 5-1 Activation Page Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product. 20 DS-K1T681 Series Face Recognition Terminal User Manual Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user. Note Characters containing admin and nimda are not supported to be set as activation password. After activation, you should select language, set password change type, set application mode, set network, set platform parameters, set privacy parameters, and set administrator. 5.2 Activate via Web Browser You can activate the device via the web browser. Steps 1. Enter the device default IP address (192.0.0.64) in the address bar of the web browser, and press Enter. Note Make sure the device IP address and the computer's should be in the same IP segment. 2. Create a new password (admin password) and confirm the password. Caution STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product. 3. Click Activate. 4. Edit the device IP address. You can edit the IP address via the SADP tool, the device, and the client software. 5.3 Activate via SADP SADP is a tool to detect, activate and modify the IP address of the device over the LAN. Before You Start Get the SADP software from the supplied disk or the official website http://
www.hikvision.com/en/ , and install the SADP according to the prompts. The device and the PC that runs the SADP tool should be within the same subnet. The following steps show how to activate a device and modify its IP address. For batch activation and IP addresses modification, refer to User Manual of SADP for details. 21 DS-K1T681 Series Face Recognition Terminal User Manual Steps 1. Run the SADP software and search the online devices. 2. Find and select your device in online device list. 3. Input new password (admin password) and confirm the password. Caution STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product. 4. Click Activate to start activation. Status of the device becomes Active after successful activation. 5. Modify IP address of the device. 1) Select the device. 2) Change the device IP address to the same subnet as your computer by either modifying the IP address manually or checking Enable DHCP. 3) Input the admin password and click Modify to activate your IP address modification. 5.4 Activate Device via Client Software For some devices, you are required to create the password to activate them before they can be added to the software and work properly. 22 DS-K1T681 Series Face Recognition Terminal User Manual Steps Note This function should be supported by the device. on the right of Device Management and select Device. 1. Enter the Device Management page. 2. Click 3. Click Online Device to show the online device area. The searched online devices are displayed in the list. 4. Check the device status (shown on Security Level column) and select an inactive device. 5. Click Activate to open the Activation dialog. 6. Create a password in the password field, and confirm the password. Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product. Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user. 7. Click OK to activate the device. 23 DS-K1T681 Series Face Recognition Terminal User Manual Chapter 6 Quick Operation 6.1 Select Language You can select a language for the device system. After the device activation, you can select a language for the device system. Figure 6-1 Select System Language 24 DS-K1T681 Series Face Recognition Terminal User Manual 6.2 Set Password Change Type After activating the device, you can set the password change type as reserved email address or security questions. Once you forgot the device password, you can change the password via the selected change type. Change Password via Email Address If you need to change password via reserved email, you can enter an email address, and tap Next. Figure 6-2 Password Change Page 25 DS-K1T681 Series Face Recognition Terminal User Manual Change via Security Questions If you need to change password via security questions, you can tap Change to Security Questions on the right corner. Select the security questions and enter the answers. Click Next. Note You can only select one type to change password. If you need, you can enter the web page to set both of the changing types. 6.3 Set Application Mode After activating the device, you should select an application mode for better device application. Steps 1. On the Welcome page, select Indoor or Others from the drop-down list. 26 DS-K1T681 Series Face Recognition Terminal User Manual Figure 6-3 Welcome Page 2. Tap OK to save. Note You can also change the settings in System Settings. If you install the device indoors near the window or the face recognition function is not working well, select Others. 27 DS-K1T681 Series Face Recognition Terminal User Manual If you do not configure the application mode and tap Next, the system will select Indoor by default. If you activate the device via other tools remotely, the system will select Indoor as the application mode by default. 6.4 Set Network Parameters After activation and select application mode, you can set the network for the device Steps 1. When you enter the Select Network page, tap Wired Network or Wi-Fi for your actual needs. 28 DS-K1T681 Series Face Recognition Terminal User Manual Figure 6-4 Select Network Note Disconnect the wired network before connecting a Wi-Fi. 2. Tap Next. Wired Network Note Make sure the device has connected to a network. 29 DS-K1T681 Series Face Recognition Terminal User Manual If enable DHCP, the system will assign the IP address and other parameters automatically. If disable DHCP, you should set the IP address, the subnet mask, and the gateway. Note IP address of 192.168.1.64, and 192.168.1.7 are not suggested to use. Wi-Fi Select a Wi-Fi and enter the Wi-Fi's password to get connected. Or tap Add Wi-Fi and enter the Wi-Fi's name and the password to get connected. 3. Optional: Tap Skip to skip network settings. 6.5 Access to Platform Enable the function and the device can communicate via Hik-ConnectGuarding Vision. You can add the device to Hik-ConnectGuarding Vision modile client and so on. Steps 1. Enable Access to Hik-Connect Access to Guarding Vision, and set the server IP and verification code. 30 DS-K1T681 Series Face Recognition Terminal User Manual Figure 6-5 Access to Hik-Connect 2. Tap Next. 3. Optional: Tap Skip to skip the step. 4. Optional: Tap Previous to go to the previous page. Note If you tap Previous to return to the Wi-Fi configuration page, you need to tap the connected Wi-
Fi or connect another Wi-Fi to enter the platform page again. 31 DS-K1T681 Series Face Recognition Terminal User Manual 6.6 Privacy Settings After activation, selecting application mode, and selecting network, you should set the privacy parameters, including the picture uploading and storage. Select parameters according to your actual needs. Upload Captured Pic. When Auth. (Upload Captured Picture When Authenticating) Upload the pictures captured when authenticating to the platform automatically. Figure 6-6 Privacy 32 DS-K1T681 Series Face Recognition Terminal User Manual Save Captured Pic. When Auth. (Save Captured Picture When Authenticating) If you enable this function, you can save the picture when Authenticating to the device. Save Registered Pic. (Save Registered Picture) The registered face picture will be saved to the system if you enable the function. Upload Pic. After Linked Capture (Upload Picture After Linked Capture) Upload the pictures captured by linked camera to the platform automatically. Save Pic. After Linked Capture (Save Pictures After Linked Capture) If you enable this function, you can save the picture captured by linked camera to the device. Tap Next to complete the settings. 6.7 Set Administrator After device activation, you can add an administrator to manage the device parameters. Before You Start Activate the device and select an application mode. Steps 1. Optional: Tap Skip to skip adding administrator if required. 2. Enter the administrator's name (optional) and tap Next. 33 DS-K1T681 Series Face Recognition Terminal User Manual Figure 6-7 Add Administrator Page 3. Select a credential to add. Note Up to one credential should be added.
: Face forward at the camera. Make sure the face is in the face recognition area. Click to capture and click to confirm.
: Press your finger according to the instructions on the device screen. Click
: Enter the card No. or present card on the card presenting area. Click OK. to confirm. 4. Click OK. 34 DS-K1T681 Series Face Recognition Terminal User Manual You will enter the authentication page. Status Icon Description
Device is armed/not armed.
Hik-Connect is enabled/disabled. Guarding Vision is enabled/disabled.
The device wired network is connected/not connected/connecting failed.
The device' Wi-Fi is enabled and connected/not connected/enabled but not connected. Shortcut Keys Description Note You can configure those shortcut keys displayed on the screen. For details, see Basic Settings . Scan QR code to authenticate. Note The QR code can be obtained from the visitor terminal. Enter the device room No. and tap OK to call. Tap to call the center. Note The device should be added to the center, or the calling operation will be failed. Enter password to authenticate. 35 DS-K1T681 Series Face Recognition Terminal User Manual Chapter 7 Basic Operation 7.1 Login Login the device to set the device basic parameters. 7.1.1 Login by Administrator If you have added an administrator for the device, only the administrator can login the device for device operation. Steps 1. Long tap on the initial page for 3 s and slide to the left/right by following the gesture to enter the admin login page. 36 DS-K1T681 Series Face Recognition Terminal User Manual 2. Authenticate the administrator's face, fingerprint or card to enter the home page. Figure 7-1 Admin Login 37 DS-K1T681 Series Face Recognition Terminal User Manual Figure 7-2 Home Page Note The device will be locked for 30 minutes after 5 failed fingerprint or card attempts. 3. Optional: Tap 4. Optional: Tap and you can enter the device activation password for login. and you can exit the admin login page. 38 DS-K1T681 Series Face Recognition Terminal User Manual 7.1.2 Login by Activation Password You should login the system before other device operations. If you do not configure an administrator, you should follow the instructions below to login. Steps 1. Long tap on the initial page for 3 s and slide to the left/right by following the gesture to enter password entering page. 2. Enter the password.
If you have added an administrator for the device, tap If you haven't added an administrator for the device, enter the password. and enter the password. 3. Tap OK to enter the home page. Note The device will be locked for 30 minutes after 5 failed password attempts. 39 DS-K1T681 Series Face Recognition Terminal User Manual Figure 7-3 Home Page 7.1.3 Forgot Password If you forget the password during authentication, you can change the password. Steps 1. Hold the initial page for 3 s and slide to the left/right by following the gesture and log in the page. 2. Optional: If you have set an administrator, tap in the pop-up admin authentication page. 40 DS-K1T681 Series Face Recognition Terminal User Manual Figure 7-4 Password Authentication Page 3. Tap Forgot Password. 4. Select a password change type from the list. Note If you have only set 1 password change type, you will go to the corresponded password change page for further settings. 5. Answer the security questions or change the password according to email address.
- Security Questions: Answer the security questions that configured when activation.
- Email Address 41 DS-K1T681 Series Face Recognition Terminal User Manual Note Make sure the device has added to the Hik-Connect account. Make sure the device has added to the Guarding Vision account. a. Download Hik-Connect app. Download Guarding Vision app. b. Go to More Reset Device Password . c. Scan the QR code on the device and a verification code will be popped up. Note Tap the QR code to get a larger picture. d. Enter the verification code on the device page. 6. Create a new password and confirm it. 7. Tap OK. 7.2 Communication Settings You can set the network parameters, the Wi-Fi parameter, the RS-485 parameters, the Wiegand parameters on the communication settings page. 7.2.1 Set Wired Network Parameters You can set the device wired network parameters, including the IP address, the subnet mask, the gateway, and DNS parameters. Steps 1. Tap Comm. (Communication Settings) on the Home page to enter the Communication Settings page. 2. On the Communication Settings page, tap Wired Network. 42 DS-K1T681 Series Face Recognition Terminal User Manual Figure 7-5 Wired Network Settings 3. Set IP Address, Subnet Mask, and Gateway.
- Enable DHCP, and the system will assign IP address, subnet mask, and gateway automatically.
- Disable DHCP, and you should set the IP address, subnet mask, and gateway manually. Note The device's IP address and the computer IP address should be in the same IP segment. IP address of 192.168.1.64, and 192.168.1.7 are not suggested to use. 4. Set the DNS parameters. You can enable Auto Obtain DNS, set the preferred DNS server and the alternate DNS server. 7.2.2 Set Wi-Fi Parameters You can enable the Wi-Fi function and set the Wi-Fi related parameters. Steps Note The function should be supported by the device. 43 DS-K1T681 Series Face Recognition Terminal User Manual 1. Tap Comm. (Communication Settings) on the Home page to enter the Communication Settings page. 2. On the Communication Settings page, tap. 3. Enable the Wi-Fi function. 4. Configure the Wi-Fi parameters. Figure 7-6 Wi-Fi Settings
- Select a Wi-Fi from the list, and enter the Wi-Fi's password. Tap OK.
If the target Wi-Fi is not in the list,tap Add Wi-Fi. Enter the Wi-Fi's name and password. And tap OK. 44 DS-K1T681 Series Face Recognition Terminal User Manual Note Only digits, letters, and special characters are allowed in the password. 5. Set the Wi-Fi's parameters.
- By default, DHCP is enable. The system will allocate the IP address, the subnet mask, and the gateway automatically. If disable DHCP, you should enter the IP address, the subnet mask, and the gateway manually.
6. Tap OK to save the settings and go back to the Wi-Fi tab. 7. Tap to save the network parameters. 7.2.3 Set RS-485 Parameters The face recognition terminal can connect external access controller, secure door control unit or card reader via the RS-485 terminal. Steps 1. Tap Comm. (Communication Settings) on the Home page to enter the Communication Settings page. 2. On the Communication Settings page, tap RS-485 to enter the RS-485 tab. 45 DS-K1T681 Series Face Recognition Terminal User Manual 3. Select an peripheral type according to your actual needs. Figure 7-7 Set RS-485 Parameters Note If you select Access Controller: If connect the device to a terminal via the RS-485 interface, set the RS-485 address as 2. If you connect the device to a controller, set the RS-485 address according to the door No. 4. Tap the back icon at the upper left corner and you should reboot the device if you change the parameters. 7.2.4 Set Wiegand Parameters You can set the Wiegand transmission direction. Steps 1. Tap Comm. (Communication Settings) on the Home page to enter the Communication Settings page. 2. On the Communication Settings page, tap Wiegand to enter the Wiegand tab. 46 DS-K1T681 Series Face Recognition Terminal User Manual 3. Enable the Wiegand function. 4. Select a transmission direction. Figure 7-8 Wiegand Settings Output: A face recognition terminal can connect an external access controller. And the two devices will transmit the card No. via Wiegand 26 or Wiegand 34. Input: A face recognition terminal can connect a Wiegand card reader. 5. Tap to save the network parameters. Note If you change the external device, and after you save the device parameters, the device will reboot automatically. 7.2.5 Set ISUP Parameters Set ISUP parameters and the device can upload data via ISUP protocol. Before You Start Make sure your device has connect to a network. Steps 1. Tap Comm. ISUP . 47 DS-K1T681 Series Face Recognition Terminal User Manual Figure 7-9 ISUP Settings 2. Enable the ISUP function and set the ISUP server parameters. ISUP Version Set the ISUP version according to your actual needs. Central Group Enable central group and the data will be uploaded to the center group. Main Channel Support N1 or None. ISUP Enable ISUP function and the data will be uploaded via ISUP protocol. Address Type Select an address type according to your actual needs. IP Address 48 DS-K1T681 Series Face Recognition Terminal User Manual Set the ISUP server's IP address. Port No. Set the ISUP server's port No. Note Port No. Range: 0 to 65535. Device ID Set device serial no. ISUP Key If you choose V5.0, you should create an account and ISUP key. If you choose other version, you should create an ISUP account only. Note Remember the ISUP account and ISUP key. You should enter the account name or the key when the device should communicate with other platforms via ISUP protocol. ISUP key range: 8 to 32 characters. 7.2.6 Platform Access You can change the device verification code and set the server address before you add the device to the Hik-ConnectGuarding Vision mobile client. Before You Start Make sure your device has connected to a network. Steps 1. Tap Comm. (Communication Settings) on the Home page to enter the Communication Settings page. 2. On the Communication Settings page, tap Access to Hik-Connect Access to Guarding Vision. 3. Enable Access to Hik-Connect Access to Guarding Vision 4. Enter Server IP. 5. Create the Verification Code, and you need to enter the verification code when you manage the devices via Hik-Connect Guarding Vision. 49 DS-K1T681 Series Face Recognition Terminal User Manual 7.3 User Management On the user management interface, you can add, edit, delete and search the user. 7.3.1 Add Administrator The administrator can log in the device backend and configure the device parameters. Steps 1. Long tap on the initial page and log in the backend. 2. Tap User + to enter the Add User page. 3. Edit the employee ID. Note The employee ID should be less than 32 characters. And it can be a combination of lower letters, upper letters, and numbers. The employee ID should not be duplicated. 50 DS-K1T681 Series Face Recognition Terminal User Manual 4. Tap the Name field and input the user name on the soft keyboard. Note Numbers, upper case letters, lower case letters, and special characters are allowed in the user name. Up to 32 characters are allowed in the user name. 5. Optional: Add a face picture, fingerprints, or cards for the administrator. Note For details about adding a face picture, see Add Face Picture . Note For details about adding a fingerprint, see Add Fingerprint . For details about adding a card, see Add Card . 6. Optional: Set the administrator's authentication type. Note For details about setting the authentication type, see Set Authentication Mode . 7. Enable the Administrator Permission function. Enable Administrator Permission The user is the administrator. Except for the normal attendance function, the user can also enter the Home page to operate after authenticating the permission. 8. Tap to save the settings. 7.3.2 Add Face Picture Add user's face picture to the device. And the user can use the face picture to authenticate. Steps 1. Long tap on the initial page for 3 s and slide to the left/right by following the gesture and log in the backend. 2. Tap User + to enter the Add User page. 3. Edit the employee ID. Note The employee ID should be less than 32 characters. And it can be a combination of lower letters, upper letters, and numbers. The employee ID should not be duplicated. 4. Tap the Name field and input the user name on the soft keyboard. 51 DS-K1T681 Series Face Recognition Terminal User Manual Note Numbers, upper case letters, lower case letters, and special characters are allowed in the user name. The suggested user name should be within 32 characters. 5. Tap the Face Picture field to enter the face picture adding page. 6. Look at the camera. Figure 7-10 Add Face Picture 52 DS-K1T681 Series Face Recognition Terminal User Manual Note Make sure your face picture is in the face picture outline when adding the face picture. Make sure the captured face picture is in good quality and is accurate. For details about the instructions of adding face pictures, see Tips When Collecting/
Comparing Face Picture . After completely adding the face picture, a captured face picture will be displayed at the upper right corner of the page. 7. Tap Save to save the face picture. 8. Optional: Tap Try Again and adjust your face position to add the face picture again. 9. Set the user role. Administrator The user is the administrator. Except for the normal attendance function, the user can also enter the Home page to operate after authenticating the permission. Normal User The User is the normal user. The user can only authenticate or take attendance on the initial page. 10. Tap to save the settings. 7.3.3 Add Fingerprint Add a fingerprint for the user and the user can authenticate via the added fingerprint. Steps Note The function should be supported by the device. 1. Long tap on the initial page for 3 s and slide to the left/right by following the gesture and enter the device backend. 2. Tap User + to enter the Add User page. 3. Tap the Employee ID. field and edit the employee ID. Note The employee ID should be less than 32 characters. And it can be a combination of lower letters, upper letters, and numbers. The employee ID should not start with 0 and should not be duplicated. 4. Tap the Name field and input the user name on the soft keyboard. 53 DS-K1T681 Series Face Recognition Terminal User Manual Note Numbers, upper case letters, lower case letters, and special characters are allowed in the user name. The suggested user name should be within 32 characters. 5. Tap the Fingerprint field to enter the Add Fingerprint page. 6. Follow the instructions to add a fingerprint. Note The same fingerprint cannot be repeatedly added. Up to 10 fingerprints can be added for one user. You can also use the client software or the fingerprint recorder to record fingerprints. For details about the instructions of scanning fingerprints, see Tips for Scanning Fingerprint . 7. Set the user role. Administrator The user is the administrator. Except for the normal attendance function, the user can also enter the Home page to operate after authenticating the permission. Normal User The User is the normal user. The user can only authenticate or take attendance on the initial page. 8. Tap to save the settings. 7.3.4 Add Card Add a card for the user and the user can authenticate via the added card. Steps 1. Long tap on the initial page for 3 s and slide to the left/right by following the gesture and log in the backend. 2. Tap User + to enter the Add User page. 3. Connect an external card reader according to the wiring diagram. 4. Tap the Employee ID. field and edit the employee ID. Note The employee ID should be less than 32 characters. And it can be a combination of lower letters, upper letters, and numbers. The employee ID should not be duplicated. 5. Tap the Name field and input the user name on the soft keyboard. 54 DS-K1T681 Series Face Recognition Terminal User Manual Note Numbers, upper case letters, lower case letters, and special characters are allowed in the user name. The suggested user name should be within 32 characters. 6. Tap the Card field and tap +. 7. Configure the card No.
- Enter the card No. manually.
- Present the card over the card presenting area to get the card No. Note The card No. cannot be empty. Up to 20 characters are allowed in the card No. The card No. cannot be duplicated. 8. Configure the card type. 9. Set the user role. Administrator The user is the administrator. Except for the normal attendance function, the user can also enter the Home page to operate after authenticating the permission. Normal User The User is the normal user. The user can only authenticate or take attendance on the initial page. 10. Tap to save the settings. 7.3.5 View Password Add a password for the user and the user can authenticate via the password. Steps 1. Long tap on the initial page for 3 s and slide to the left/right by following the gesture and log in the backend. 2. Tap User + to enter the Add User page. 3. Tap the Employee ID. field and edit the employee ID. Note The employee ID should be less than 32 characters. And it can be a combination of lower letters, upper letters, and numbers. The employee ID should not be duplicated. 4. Tap the Name field and input the user name on the soft keyboard. 55 DS-K1T681 Series Face Recognition Terminal User Manual Note Numbers, upper case letters, lower case letters, and special characters are allowed in the user name. The suggested user name should be within 32 characters. 5. Tap the Password to view the password. Note The password cannot be edited. It can only be applied by the platform. 6. Set the user role. Administrator The user is the administrator. Except for the normal attendance function, the user can also enter the Home page to operate after authenticating the permission. Normal User The User is the normal user. The user can only authenticate or take attendance on the initial page. 7. Tap to save the settings. 7.3.6 Set Authentication Mode After adding the user's face picture, password, or other credentials, you should set the authentication mode and the user can authenticate his/her identity via the configured authentication mode. Steps 1. Long tap on the initial page for 3 s and slide to the left/right by following the gesture and log in the backend. 2. Tap User Add User/Edit User Authentication Mode . 3. Select Device or Custom as the authentication mode. Device If you want to select device mode, you should set the terminal authentication mode in Access Control Settings page first. For details see Setting Access Control Parameters. Custom You can combine different authentication modes together according to your actual needs. 4. Tap to save the settings. 7.3.7 Search and Edit User After adding the user, you can search the user and edit it. 56 DS-K1T681 Series Face Recognition Terminal User Manual Search User On the User Management page, Tap the search area to enter the Search User page. Tap Card on the left of the page and select a search type from the drop-down list. Enter the employee ID, card No., or the user name for search. Tap to search. Edit User On the User Management page, select a user from the user list to enter the Edit User page. Follow the steps in User Management to edit the user parameters. Tap to save the settings. Note The employee ID cannot be edited. 7.4 Data Management You can delete data, import data, and export data. 7.4.1 Delete Data Delete user data. On the Home page, tap Data Delete Data User Data . All user data added in the device will be deleted. 7.4.2 Import Data Steps 1. Plug a USB flash drive in the device. 2. On the Home page, tap Data Import Data . 3. Tap User Data or Face Data. 4. Enter the created password when you exported the data. If you do not create a password when you exported the data, leave a blank in the input box and tap OK immediately. Note If you want to transfer all user information from one device (Device A) to another (Device B), you should export the information from Device A to the USB flash drive and then import from the USB flash drive to Device B. In this case, you should import the user data before importing the profile photo. The supported USB flash drive format is FAT32. The imported pictures should be saved in the folder (named enroll_pic) of the root directory and the picture's name should be follow the rule below:
Card No._Name_Department_Employee ID_Gender.jpg 57 DS-K1T681 Series Face Recognition Terminal User Manual If the folder enroll_pic cannot save all imported pictures, you can create another folders, named enroll_pic1, enroll_pic2, enroll_pic3, enroll_pic4, under the root directory. The employee ID should be less than 32 characters. It can be a combination of lower letters, upper letters, and numbers. It should not be duplicated, and should not start with 0. Requirements of face picture should follow the rules below: It should be taken in full-face view, directly facing the camera. Do not wear a hat or head covering when taking the face picture. The format should be JPEG or JPG. The resolution should be 640 480 pixel or more than of 640 480 pixel. The picture size should be between 60 KB and 200 KB. 7.4.3 Export Data Steps 1. Plug a USB flash drive in the device. 2. On the Home page, tap Data Export Data . 3. Tap Event Data, User Data, or Face Data. 4. Optional: Create a password for exporting. When you import those data to another device, you should enter the password. Note The supported USB flash drive format is DB. The system supports the USB flash drive with the storage of 1G to 32G. Make sure the free space of the USB flash drive is more than 512M. The exported user data is a DB file, which cannot be edited. 7.5 Identity Authentication After network configuration, system parameters configuration and user configuration, you can go back to the initial page for identity authentication. The system will authenticate person according to the configured authentication mode. You can authenticate identity via 1:1 matching or 1:N matching. 1:N Matching Compare the captured face picture with all face pictures stored in the device. 1: 1 Matching Compare the captured face picture with the linked face picture. 7.5.1 Authenticate via Single Credential Set the user authentication type before authentication. For details, see Set Authentication Mode . Authenticate face, fingerprint, card or QR code. Face 58 DS-K1T681 Series Face Recognition Terminal User Manual Face forward at the camera and start authentication via face. Fingerprint Place the enrolled fingerprint on the fingerprint module and start authentication via fingerprint. Card Present the card on the card presenting area and start authentication via card. Note The card can be normal IC card, or encrypted card. QR Code Put the QR code in front of the device camera to authenticate via QR code. Note Authentication via QR code should be supported by the device. The dimension of the recognized QR code picture should be larger than 6 cm 6 cm. Password Enter the password to authenticate via password. If authentication completed, a prompt "Authenticated" will pop up. 7.5.2 Authenticate via Multiple Credential Before You Start Set the user authentication type before authentication. For details, see Set Authentication Mode . Steps 1. If the authentication mode is Card and Face, Password and Face, Card and Password, Card and Face and Fingerprint, authenticate any credential according to the instructions on the live view page. Note The card can be normal IC card, or encrypted card. If the QR Code Scanning function is enabled, you can put the QR code in front of the device camera to authenticate via QR code. The dimension of the recognized QR code picture should be larger than 6 cm 6 cm. 2. After the previous credential is authenticated, continue authenticate other credentials. Note For detailed information about scanning fingerprint, see Tips for Scanning Fingerprint. For detailed information about authenticating face, see Tips When Collecting/Comparing Face Picture. 59 DS-K1T681 Series Face Recognition Terminal User Manual If authentication succeeded, the prompt "Authenticated" will pop up. 7.6 Basic Settings You can set the voice settings, time settings, sleeping (s), language, community No., building No., Unit No., and beauty. Long tap on the initial page for 3 s and slide to the left/right by following the gesture and login the device home page. Tap Basic. Figure 7-11 Basic Settings Page Voice Settings You can enable/disable the voice prompt function and adjust the voice volume. Note You can set the voice volume between 0 and 10. Time Settings Set the time zone, the device time and the DST. 60 DS-K1T681 Series Face Recognition Terminal User Manual Sleeping (s) Set the device sleeping waiting time (minute). When you are on the initial page and if you set the sleeping time to 30 min, the device will sleep after 30 min without any operation. Note If you set the sleeping time to 0, the device will not enter sleeping mode. Select Language Select the language according to actual needs. Community No. Set the device installed community No. Building No. Set the device installed building No. Unit No. Set the device installed unit No. Beauty You can enable the beauty function and set the smooth and the whiten parameter. Tap + or - to control the effect strength. Note By default, the function is disabled. 7.7 Set Biometric Parameters You can customize the face parameters to improve the face recognition performance. The configurable parameters includes application mode, face liveness level, face recognition distance, face recognition interval, wide dynamic, face 1:N security level, face 1:1 security level, ECO settings, face with mask detection and hard hat detection. Long tap on the initial page for 3 s and login the home page. Tap Biometric. Table 7-1 Face Picture Parameters Parameter Description Application Mode Select either others or indoor according to actual environment. Face Liveness Level After enabling face anti-spoofing function, you can set the matching security level when performing live face authentication. Face Recognition Distance Set the valid distance between the user and the camera when authenticating. 61 DS-K1T681 Series Face Recognition Terminal User Manual Parameter Description Face Recognition Interval The time interval between two continuous face recognitions when authenticating. Note You can input the number from 1 to 10. Wide Dynamic It is suggested to enable the WDR function if installing the device outdoors. When there are both very bright and very dark areas simultaneously in the view, you can enable the WDR function to balance the brightness of the whole image and provide clear images with details. Face 1:N Security Level Set the matching threshold when authenticating via 1:N matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. Face 1:1 Security Level Set the matching threshold when authenticating via 1:1 matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. ECO Settings After enabling the ECO mode, the device will use the IR camera to authenticate faces in the low light or dark environment. And you can set the ECO mode threshold, ECO mode (1:N), and ECO mode (1:1). ECO Mode Threshold When enabling the ECO mode, you can set the ECO mode's threshold. The larger the value, the easier the device entering the ECO mode. ECO Mode (1:1) Set the matching threshold when authenticating via ECO mode 1:1 matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. ECO Mode (1:N) Set the matching threshold when authenticating via ECO mode 1:N matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate Face with Mask & Face(1:N ECO) Set the matching value when authenticating with face mask via ECO mode 1:N matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. 62 DS-K1T681 Series Face Recognition Terminal User Manual Parameter Face with Mask Detection Description After enabling the face with mask detection, the system will recognize the captured face with mask picture. You can set face with mask & face 1:N level and the strategy. Reminder of Wearing If the person do not wear a face mask when authenticating, the device prompts a notification and the door will open. Must Wear If the person do not wear a face mask when authenticating, the device prompts a notification and the door keeps closed. None If the person do not wear a face mask when authenticating, the device will not prompt a notification. Hard Hat Detection After enabling the hard hat detection, you can set the strategy. Reminder of Wearing If the person do not wear the hard hat when authenticating, the device will pop up a prompt and the door will open. Must Wear If the person do not wear the hard hat when authenticating, the device will pop up a prompt and the door will keep closed. None If the person do not wear a face mask when authenticating, the device will not prompt a notification. 7.8 Set Access Control Parameters You can set the access control permissions, including the functions of authentication mode, enable NFC card, door contact, and door open time. On the Home page, tap ACS (Access Control Settings) to enter the Access Control Settings page. Edit the access control parameters on this page. 63 DS-K1T681 Series Face Recognition Terminal User Manual The available parameters descriptions are as follows:
Figure 7-12 Access Control Parameters Table 7-2 Access Control Parameters Descriptions Parameter Description Terminal Auth. Mode (Terminal Authentication Mode) Select the face recognition terminal's authentication mode. You can also customize the authentication mode. Note Only the device with the fingerprint module supports the fingerprint related function. Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher security level, use multiple authentication modes. If you adopt multiple authentication modes, you should authenticate other methods before authenticating face. Select the card reader's authentication mode. Enable the function and you can present the NFC card to authenticate. 64 Reader Auth. Mode (Card Reader Authentication Mode) Enable NFC Card DS-K1T681 Series Face Recognition Terminal User Manual Parameter Description Door Contact Open Duration Authentication Interval You can select "Remain Open" or "Remian Closed" according to your actual needs. By default, it is Remian Closed. Set the door unlocking duration. If the door is not opened for the set time, the door will be locked. Available door locked time range: 1 to 255s. Set the device authenticating interval. Available authentication interval range: 0 to 65535. 7.9 Time and Attendance Status Settings You can set the attendance mode as check in, check out, break out, break in, overtime in, and overtime out according to your actual situation. Note The function should be used cooperatively with time and attendance function on the client software. 7.9.1 Disable Attendance Mode via Device Disable the attendance mode and the system will not display the attendance status on the initial page. Tap T&A Status to enter the T&A Status page. Figure 7-13 Disable Attendance Mode Set the Attendance Mode as Disable. You will not view or configure the attendance status on the initial page. And the system will follow the attendance rule that configured on the platform. 65 DS-K1T681 Series Face Recognition Terminal User Manual 7.9.2 Set Manual Attendance via Device Set the attendance mode as manual, and you should select a status manually when you take attendance. Before You Start Add at least one user, and set the user's authentication mode. For details, see User Management. Steps 1. Tap T&A Status to enter the T&A Status page. 2. Set the Attendance Mode as Manual. Figure 7-14 Manual Attendance Mode 3. Enable the Attendance Status Required. 4. Enable a group of attendance status. Note The Attendance Property will not be changed. 5. Optional: Select an status and change its name if required. The name will be displayed on the T & A Status page and the authentication result page. Result You should select an attendance status manually after authentication. 66 DS-K1T681 Series Face Recognition Terminal User Manual Note If you do not select a status, the authentication will be failed and it will not be marked as a valid attendance. 7.9.3 Set Auto Attendance via Device Set the attendance mode as auto, and you can set the attendance status and its available schedule. The system will automatically change the attendance status according to the configured schedule. Before You Start Add at least one user, and set the user's authentication mode. For details, see User Management. Steps 1. Tap T&A Status to enter the T&A Status page. 2. Set the Attendance Mode as Auto. Figure 7-15 Auto Attendance Mode 3. Enable the Attendance Status function. 4. Enable a group of attendance status. Note The Attendance Property will not be changed. 5. Optional: Select an status and change its name if required. The name will be displayed on the T & A Status page and the authentication result page. 67 DS-K1T681 Series Face Recognition Terminal User Manual 6. Set the status' schedule. 1) Tap Attendance Schedule. 2) Select Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, or Sunday. 3) Set the selected attendance status's start time of the day. 4) Tap Confirm. 5) Repeat step 1 to 4 according to your actual needs. Note The attendance status will be valid within the configured schedule. Result When you authenticate on the initial page, the authentication will be marked as the configured attendance status according to the configured schedule. Example If set the Break Out as Monday 11:00, and Break In as Monday 12:00, the valid user's authentication from Monday 11:00 to 12:00 will be marked as break. 7.9.4 Set Manual and Auto Attendance via Device Set the attendance mode as Manual and Auto, and the system will automatically change the attendance status according to the configured schedule. At the same time you can manually change the attendance status after the authentication. Before You Start Add at least one user, and set the user's authentication mode. For details, see User Management. Steps 1. Tap T&A Status to enter the T&A Status page. 2. Set the Attendance Mode as Manual and Auto. 68 DS-K1T681 Series Face Recognition Terminal User Manual Figure 7-16 Manual and Auto Mode 3. Enable the Attendance Status function. 4. Enable a group of attendance status. Note The Attendance Property will not be changed. 5. Optional: Select an status and change its name if required. The name will be displayed on the T & A Status page and the authentication result page. 6. Set the status' schedule. 1) Tap Attendance Schedule. 2) Select Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, or Sunday. 3) Set the selected attendance status's start time of the day. 4) Tap OK. 5) Repeat step 1 to 4 according to your actual needs. Note The attendance status will be valid within the configured schedule. Result On the initial page and authenticate. The authentication will be marked as the configured attendance status according to the schedule. If you tap the edit icon on the result tab, you can select a status to take attendance manually, the authentication will be marked as the edited attendance status. 69 DS-K1T681 Series Face Recognition Terminal User Manual Example If set the Break Out as Monday 11:00, and Break In as Monday 12:00, the valid user's authentication from Monday 11:00 to 12:00 will be marked as break. 7.10 Preference Settings You can configure preference settings parameters. Steps 1. Tap Basic Settings Preference to enter the preference settings page. Figure 7-17 Preference Settings Shortcut Key Choose the shortcut key that displayed on the authentication page, including the call function, call type, and the password entering function. Note You can select call type from Call Room, Call Center, Call Specified Room No. and Call APP. Call Room When you tap the call button on the authentication page, you should dial a room No. to call. Call Center When you tap the call button on the authentication page, you can call the center directly. Call Specified Room No. You should set a room No. When you tap the call button on the authentication page, you can call the configured room directly without dialing. Call APP 70 DS-K1T681 Series Face Recognition Terminal User Manual When you tap the call button on the authentication page, you will call the mobile client where the device is added. Password Enable this function amd you can enter the password to authenticate via password. Theme You can set the theme of the prompt window on the authentication page. You can select Theme as Default, Simple, or Advertisement. Default The device authentication page will display the live view page. And the person's name, employee ID, face pictures will all be displayed after authentication. Simple After selecting this mode, the live view of the authentication page will be disabled, and in the meanwhile, the person's name, employee ID, face pictures will all be hidden after authentication. Advertisement After selecting this mode, the advertising area and identification authentication area of the device will be displayed on separate screens. Video and advertising information playback, welcome speech display are supported. 7.11 System Maintenance You can view the system information and the capacity. You can also upgrade the device, restore to factory settings, restore to default settings, and reboot the device. Long tap on the initial page for 3 s and slide to the left/right by following the gesture and login the home page. Tap Maint. Hold the ? on the upper-right corner of the page and enter the password to view the version of the device. 71 DS-K1T681 Series Face Recognition Terminal User Manual System Information You can view the device model, serial No., versions, address, production data, QR code, and open source code license. Note The page may vary according to different device models. Refers to the actual page for details. Capacity You can view the number of, user, face picture, card, and event. Device Upgrade 72 DS-K1T681 Series Face Recognition Terminal User Manual Online Update If the device has been connected to Hik-Connect and network, when there is a new installation package in Hik-Connect, you can tap Device Upgrade Online Update to upgrade the device system. If the device has been connected to Guarding Vision and network, when there is a new installation package in Guarding Vision, you can tap Device Upgrade Online Update to upgrade the device system. Update via USB Plug the USB flash drive in the device USB interface. Tap Device Upgrade Update via USB , and the device will read the digicap.dav file in the USB flash drive to start upgrading. Unlink APP Account After unlinking APP account, you cannot operate via APP. Restore to Default Settings All parameters, except for the communication settings, remotely imported user information, will be restored to the default settings. The system will reboot to take effect. Restore to Factory Settings All parameters will be restored to the factory settings. The system will reboot to take effect. Reboot Reboot the device. 7.12 Video Intercom After adding the device to the client software, you can call the device from the client software, call the main station from the device, call the client software from the device, or call the indoor station from the device. 7.12.1 Call Client Software from Device Steps 1. Get the client software from the supplied disk or the official website, and install the software according to the prompts. 2. Run the client software and the control panel of the software pops up. 3. Click Device Management to enter the Device Management interface. 4. Add the device to the client software. Note For details about adding device, see Add Device. 5. Call the client software. 1) Tap on the device initial page. 73 DS-K1T681 Series Face Recognition Terminal User Manual 2) Enter 0 in the pop-up window. 3) Tap to call the client software. 6. Tap Answer on the pop-up page of the client software and you can start two-way audio between the device and the client software. Note If the device is added to multiple client softwares and when the device is calling the client software, only the first client software added the device will pop up the call receiving window. 7.12.2 Call Center from Device Steps 1. Get the client software from the supplied disk or the official website, and install the software according to the prompts. 2. Run the client software and the control panel of the software pops up. 3. Click Device Management to enter the Device Management interface. 4. Add the main station and the device to the client software. Note For details about adding device, see Add Device. 5. Set the main station's IP address and SIP address in the remote configuration page. Note For details about the operation, see the user manual of the main station. 6. Call the center.
If you have configured to call center in the Basic Settings , you can tap If you have not configured to call center in the Basic Settings , you should tap the center to call the center. to call 7. Answers the call via the main station and starts two-way audio. Note The device will call the main station in priority. 7.12.3 Call Device from Client Software Steps 1. Get the client software from the supplied disk or the official website, and install the software according to the prompts. 2. Run the client software and the control panel of the software pops up. 3. Click Device Management to enter the Device Management page. 4. Add the device to the client software. 74 DS-K1T681 Series Face Recognition Terminal User Manual Note For details about adding device, see Add Device. 5. Enter the Live View page and double-click the added device to start live view. Note For details about operations in the Live View page, see Live View in the user manual of the client software. 6. Right click the live view image to open the right-click menu. 7. Click Start Two-Way Audio to start two-way audio between the device and the client software. 7.12.4 Call Room from Device Steps 1. Get the client software from the supplied disk or the official website, and install the software according to the prompts. 2. Run the client software and the control panel of the software pops up. 3. Click Device Management to enter the Device Management interface. 4. Add the indoor station and the device to the client software. Note For details about adding device, see Add Device. 5. Link a user to an indoor station and set a room No. for the indoor station. 6. Call the room.
If you have configured a specified room No. in the Basic Settings , you can tap room. If you have not configured a specified room No. in the Basic Settings , you should tap the authentication page of the device. Enter the room No. on the dial page and tap the room. to call the on to call 7. After the indoor station answers the call, you can start two-way audio with the indoor station. 7.12.5 Call Mobile Client from Device Steps 1. Get the mobile mobile client from the supplied disk or the official website, and install the software according to the prompts. 2. Run the mobile client and add the device to the mobile client. Note For details, see the user manual of the mobile client. 3. Enter Basic Settings Shortcut Key and enable Call APP. 4. Go back to the initial page and call the mobile client. 75 DS-K1T681 Series Face Recognition Terminal User Manual 1) Tap 2) Tap on the device initial page. to call the mobile client. 7.12.6 Call Room from Device Steps 1. Get the client software from the supplied disk or the official website, and install the software according to the prompts. 2. Run the client software and the control panel of the software pops up. on the device initial page. 3. Tap 4. Enter the room No. , and tap call button. 76 DS-K1T681 Series Face Recognition Terminal User Manual Chapter 8 Operation via Web Browser 8.1 Login You can login via the web browser or the remote configuration of the client software. Note Make sure the device is activated. For detailed information about activation, see Activation . Login via Web Browser Enter the device IP address in the address bar of the web browser and press Enter to enter the login page. Enter the device user name and the password. Click Login. Login via Remote Configuration of Client Software Download and open the client software. After adding the device, click page. to enter the Configuration 8.2 Forget Password If you forget the password when logging in, you can change the password by email address or security questions. On the login page, click Forget Password. Select Verification Mode. Security Question Verification Answer the security questions. E-mail Verification 1. Export the QR code and send it to pw_recovery@hikvision.com as attachment. Export the QR code and send it to the server email address as attachment. 2. You will receive a verification code within 5 minutes in your reserved email. 3. Enter the verification code into the verification code field to verify your identification. Click Next, create a new password and confirm it. 8.3 Live View You can view the live video of the device. After logging in, you will enter the live view page. You can perform the live view, capture, video recording, and other operations. 77 DS-K1T681 Series Face Recognition Terminal User Manual Function Descriptions:
Figure 8-1 Live View Page Select the image size when starting live view. Set the volume when starting live view. Note If you adjust the volume when starting two-way audio, you may hear a repeated sounds. You can capture image when starting live view. Reserved function. You can zoom in the live view image. Start or stop live view. Start or stop video recording. Select the streaming type when starting live view. You can select from the main stream and the sub stream. Full screen view. 78 DS-K1T681 Series Face Recognition Terminal User Manual 8.4 Person Management Click and add the person's information, including the basic information, card, authentication mode, and the picture. Click OK to save the person. Add Basic Information Click User Add to enter the Add Person page. Add the person's basic information, including the employee ID, the person's name, the gender, user level, floor No., and room No. Click OK to save the settings. Add Card Click User Add to enter the Add Person page. Click Add Card and enter a card number. Click OK to save the settings. Add Face Picture Click User Add to enter the Add Person page. Click + on the right to upload a face picture from the local PC. Note The picture format should be JPG, JPEG or PNG. The size should be less than 200K. Click OK to save the settings. Set Permission Time Click User Add to enter the Add Person page. Set Start Time and End Time. Click OK to save the settings. Set Access Control Click User Add to enter the Add Person page. After check Adminstrator in Access Control, the added person can log in by authenticating face. Click OK to save the settings. Add Authentication Mode Click User Add to enter the Add Person page. Set the authentication type. Click OK to save the settings. 79 DS-K1T681 Series Face Recognition Terminal User Manual 8.5 Search Event Click Search to enter the Search page. Figure 8-2 Search Page Enter the search conditions, including the employee ID, the name, the card No., the start time, and the end time, and click Search. The results will be displayed on the right panel. 8.6 Configuration 8.6.1 Set Local Parameters Set the live view parameters, record file saving path, and captured pictures saving path. 80 DS-K1T681 Series Face Recognition Terminal User Manual Set Live View Parameters Click Configuration Local to enter the Local page. Configure the stream type, the play performance, auto start live view, and the image format and click Save. Set Record File Saving Path Click Configuration Local to enter the Local page. Select a record file size and select a saving path from your local computer and click Save. You can also click Open to open the file folder to view details. Set Captured Pictures Saving Path Click Configuration Local to enter the Local page. Select a saving path from your local computer and click Save. You can also click Open to open the file folder to view details. 8.6.2 View Device Information View the device name, language, model, serial No., QR code, version, device capacity, etc. Click Configuration System System Settings Basic Information to enter the configuration page. You can view the device name, language, model, serial No., QR code, version, device capacity, etc. 8.6.3 Set Time Set the device's time zone, synchronization mode, and the device time. Click Configuration System System Settings Time Settings . Figure 8-3 Time Settings Click Save to save the settings after the configuration. Time Zone Select the device located time zone from the drop-down list. Time Sync. NTP 81 DS-K1T681 Series Face Recognition Terminal User Manual You should set the NTP server's IP address, port No., and interval. Manual By default, the device time should be synchronized manually. You can set the device time manually or check Sync. with Computer Time to synchronize the device time with the computer's time. 8.6.4 Set DST Steps 1. Click Configuration System System Settings DST . Figure 8-4 DST Page 2. Check Enable DST. 3. Set the DST start time, end time and bias time. 4. Click Save to save the settings. 8.6.5 View Open Source Software License Go to Configuration System System Settings About , and click View Licenses to view the device license. 8.6.6 Upgrade and Maintenance Reboot device, restore device parameters, and upgrade device version. Reboot Device Click Configuration System Maintenance Upgrade & Maintenance . 82 DS-K1T681 Series Face Recognition Terminal User Manual Click Reboot to start reboot the device. Figure 8-5 Upgrade and Maintenance Page Restore Parameters Click Configuration System Maintenance Upgrade & Maintenance . Restore All All parameters will be restored to the factory settings. You should activate the device before usage. Default The device will restore to the default settings, except for the device IP address and the user information. Unlink APP Account Unlink the Hik-Connect account from the platform. Unlink the Guarding Vision account from the platform. Import and Export Parameters Click Configuration System Maintenance Upgrade & Maintenance . Export Click Export to export the logs or device parameters. Note You can import the exported device parameters to another device. Import 83 DS-K1T681 Series Face Recognition Terminal User Manual Click and select the file to import. Click Import to start import configuration file. Upgrade Click Configuration System Maintenance Upgrade & Maintenance . Select an upgrade type from the drop-down list. Click local PC. Click Upgrade to start upgrading. If the device has been connected to Hik-Connect and network, when there is a new installation package in Hik-Connect, you can click Upgrade after Online Update to upgrade the device system. If the device has been connected to Guarding Vision and network, when there is a new installation package in Guarding Vision, you can click Upgrade after Online Update to upgrade the device system. and select the upgrade file from your Note Do not power off during the upgrading. 8.6.7 Log Query You can search and view the device logs. Go to Configuration System Maintenance Log Query . Set the major and minor type of the log type. Set the start time and end time for searching, and click Search. The results will be displayed below, which including the No., time, the major type the minor type, the channel No., the local/remote user information, the remote host IP, etc. 8.6.8 Security Mode Settings Set the security mode for logging in the client software. On the Device for Management page, click Configuration System Security Security Service . Select a security mode from the drop-down list, and click Save. Security Mode High security level for user information verification when logging in the client software. Compatible Mode The user information verification is compatible with the old client software version when logging in. Enable SSH To raise network security, disable SSH service. The configuration is only used to debug the device for the professionals. Enable HTTP 84 DS-K1T681 Series Face Recognition Terminal User Manual In order to increase the network security level when visiting websites, you can enable HTTP to acquire a more secure and encrypted network communication environment. The communication should authenticated by identity and encryption password after enabling HTTP, which is save. 8.6.9 Certificate Management It helps to manage the server/client certificates and CA certificate. Note The function is only supported by certain device models. Create and Install Self-signed Certificate Steps 1. Go to Configuration System Security Certificate Management . 2. In the Certificate Files area, select a Certificate Type from the drop-down list. 3. Click Create. 4. Input certificate information. 5. Click OK to save and install the certificate. The created certificate is displayed in the Certificate Details area. The certificate will be saved automatically. 6. Download the certificate and save it to an asking file in the local computer. 7. Send the asking file to a certification authority for signature. 8. Import the signed certificate. 1) Select a certificate type in the Import Passwords area, and select a certificate from the local, and click Install. 2) Select a certificate type in the Import Communication Certificate area, and select a certificate from the local, and click Install. Install Other Authorized Certificate If you already has an authorized certificate (not created by the device), you can import it to the device directly. Steps 1. Go to Configuration System Security Certificate Management . 2. In the Import Passwords and Import Communication Certificate areas, select certificate type and upload certificate. 3. Click Install. 85 DS-K1T681 Series Face Recognition Terminal User Manual Install CA Certificate Before You Start Prepare a CA certificate in advance. Steps 1. Go to Configuration System Security Certificate Management . 2. Create an ID in the Inport CA Certificate area. Note The input certificate ID cannot be the same as the existing ones. 3. Upload a certificate file from the local. 4. Click Install. 8.6.10 Change Administrator's Password
. Steps 1. Click Configuration User Management . 2. Click 3. Enter the old password and create a new password. 4. Confirm the new password. 5. Click OK. Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product. Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user. 8.6.11 Account Security Settings You can change the security questions and answers, or the email address for the device. After change the settings, once you forgot the device password, you should answer the new questions or use the new email address to reset the device password. Steps 1. Click Configuration System User Management Account Security Settings . 2. Change the security questions or email address according your actual needs. 86 DS-K1T681 Series Face Recognition Terminal User Manual 3. Enter the device password and click OK to confirm changing. 8.6.12 View Device Arming/Disarming Information View device arming type and arming IP address. Go to Configuration User Management Arming/Disarming Information . You can view the device arming/disarming information. Click Refresh to refresh the page. 8.6.13 Network Settings Set TCP/IP, port, Wi-Fi parameters, report strategy and platform access. Note Some device models do not support Wi-Fi settings. Refer to the actual products when configuration. Set Basic Network Parameters Click Configuration Network Basic Settings TCP/IP . Figure 8-6 TCP/IP Settings Page 87 DS-K1T681 Series Face Recognition Terminal User Manual Set the parameters and click Save to save the settings. DHCP If uncheck the function, you should set the IPv4 address, IPv4 subnet mask, IPv4 default gateway, MTU, and the device port. If you check the function, the system will allocate the IPv4 address, IPv4 subnet mask, and the IPv4 default gateway automatically. NIC Type Select a NIC type from the drop-down list. By default, it is Auto. DNS Server Set the preferred DNS server and the Alternate DNS server according to your actual need. Set Port Parameters Set the HTTP, RTSP, HTTPS and Server port parmaeters. Click Configuration Network Basic Settings Port . HTTP It refers to the port through which the browser accesses the device. For example, when the HTTP Port is modified to 81, you need to enter http://192.0.0.65:81 in the browser for login. RTSP It refers to the port of real-time streaming protocol. HTTPS Set the HTTPS for accessing the browser. Certificate is required when accessing. Server It refers to the port through which the client adds the device. Set Wi-Fi Parameters Set the Wi-Fi parameters for device wireless connection. Steps Note The function should be supported by the device. 1. Click Configuration Network Basic Settings Wi-Fi . 88 DS-K1T681 Series Face Recognition Terminal User Manual 2. Check Wi-Fi. 3. Select a Wi-Fi Figure 8-7 Wi-Fi Settings Page
- Click
- Click Add and enter a Wi-Fi's name, password, and encryption type. Click Connect. When the of a Wi-Fi in the list and enter the Wi-Fi password. Wi-Fi is connected, click OK. 4. Optional: Set the WLAN parameters. 1) Click TCP/IP Settings. 2) Set the IP address, subnet mask, and default gateway. Or check Enable DHCP and the system will allocate the IP address, subnet mask, and default gateway automatically. 5. Click Save. Report Strategy Settings You can set the center group for uploading the log via the ISUP protocol. Go to Configuration Network Basic Settings Report Strategy . You can set the center group and the system will transfer logs via ISUP protocol. Click Save to save the settings. Center Group Select a center group from the drop-down list. Main Channel The device will communicate with the center via the main channel. Note N1 refers to wired network. 89 DS-K1T681 Series Face Recognition Terminal User Manual Set ISUP Parameters Set the ISUP parameters for accessing device via ISUP protocol. Steps Note The function should be supported by the device. 1. Click Configuration Network Advanced Settings Platform . 2. Select ISUP from the platform access mode drop-down list. 3. Check Enable. 4. Set the ISUP version, server address, device ID, and the ISUP status. Note If you select 5.0 as the version, you should set the ISUP key as well. 5. Click Save. 8.6.14 Set Video and Audio Parameters Set the image quality, resolution, and the device volume. Set Video Parameters Click Configuration Video/Audio Video . 90 DS-K1T681 Series Face Recognition Terminal User Manual Figure 8-8 Video Settings Page Set the video channel, camera name, stream type, the video type, the bitrate type, the frame rate, the Max. bitrate, the video encoding, and I Frame Interval. Click Save to save the settings after the configuration. Set Audio Parameters Click Configuration Video/Audio Audio . Select the audio channel. You can also drag the block to adjust the device input and output volume. Click to enable Voice Prompt. Click Save to save the settings after the configuration. Note The functions vary according to different models. Refers to the actual device for details. 91 DS-K1T681 Series Face Recognition Terminal User Manual 8.6.15 Customize Audio Content Customize the output audio content when authentication succeeded and failed. Steps 1. Click Configuration Video/Audio Prompt . 2. Select Prompt as TTS(Text to Speech) to turn the text to audio content. 3. Or you can select Prompt as Custom Prompt Importing. 1) Select Custom Type or you can import your custom prompt from local PC. 2) You can view the inporting status of the custom prompts in the list. Note The audio file shall be in WAV format and mono, and the sampling rate shall be 8 K or 16 K. The amplitude of the audio file shall not exceed -3dB, and the size of the audio file size shall not exceed 512 K. 4. Select time schedule. 5. Enable the function. 6. Set the appellation. 7. Set the time period when authentication succeeded. 1) Click Add. 2) Set the time duration and the language. Note If authentication is succeeded in the configured time duration, the device will broadcast the configured content. 3) Enter the audio content. 4) Optional: Repeat substep 1 to 3. 5) Optional: Click to delete the configured time duration. 8. Set the time duration when authentication failed. 1) Click Add. 2) Set the time duration and the language. Note If authentication is failed in the configured time duration, the device will broadcast the configured content. 3) Enter the audio content. 4) Optional: Repeat substep 1 to 3. 5) Optional: Click to delete the configured time duration. 9. Optional: Add holiday schedule. 1) Click Add to add holiday schedule. 2) Repeat step 3 to 6. 10. Click Save to save the settings. 92 DS-K1T681 Series Face Recognition Terminal User Manual 8.6.16 Set Image Parameters Set the video standard, WDR, brightness, contrast, saturation, and sharpness. Steps 1. Click Configuration Image Adjustment . 2. Configure the parameters to adjust the image. Video Standard Figure 8-9 Image Settings Page Set the video frame rate when performing live view remotely. After changing the standard, you should reboot the device to take effect. PAL 25 frames per second. Suitable for mainland China, Hong Kong (China), the Middle East countries, Europe countries, etc. NTSC 30 frames per second. Suitable for the USA, Canada, Japan, Taiwan (China), Korea, the Philippines, etc. WDR Enable or disable the WDR function. When there are both very bright and very dark areas simultaneously in the view, WDR balances the brightness level of the whole image and provide clear images with details. Brightness/Contrast/Saturation/Sharpness Drag the block or enter the value to adjust the live video's brightness, contrast, saturation, and sharpness. 93 DS-K1T681 Series Face Recognition Terminal User Manual Start/end recording video. Capture the image. 3. Click Default to restore the parameters to the default settings. 8.6.17 Set Supplement Light Brightness Set the device supplement light brightness. Steps 1. Click Configuration Image Supplement Light Parameters . Figure 8-10 Supplement Light Settings Page 2. Select a supplement light type and mode from the drop-down list. If you select the mode as ON, you should set the brightness. 8.6.18 Time and Attendance Settings If you want to track and monitor when the persons start/stop work and monitor their working hours and late arrivals, early departures, time taken on breaks, and absenteeism, you can add the person to the shift group and assign a shift schedule (a rule for the attendance defining how the schedule repeats, the shift type, break settings, and the card swiping rule.) to the shift group to define the attendance parameters for the persons in the shift group. Disable Attendance Mode via Web Disable the attendance mode and the system will not display the attendance status on the initial page. Steps 1. Click Configuration Attendance to enter the settings page. 2. Set the Attendance Mode as Disable. 94 DS-K1T681 Series Face Recognition Terminal User Manual Result You will not view or configure the attendance status on the initial page. And the system will follow the attendance rule that configured on the platform. Time Settings Steps 1. Click Configuration Time Settings to enter the settings page. 2. Select Status Type. 3. Optional: Edit Schedule Name according to the actual needs. 4. Drag mouse to set the schedule. Note Set the schedule from Monday to Sunday according to the actual needs. 5. Optional: Select a timeline and click Delete. Or click Delete All to clear the settings. 6. Click Save. Set Manual Attendance via Web Set the attendance mode as manual, and you should select a status manually when you take attendance. Before You Start Add at least one user, and set the user's authentication mode. For details, see User Management. Steps 1. Click Configuration Attendance to enter the settings page. 2. Set the Attendance Mode as Manual. 3. Enable the Attendance Status Required and set the attendace status lasts duration. 4. Enable a group of attendance status. Note The Attendance Property will not be changed. 5. Optional: Select an status and change its name if required. Result You should select an attendance status manually after authentication. Note If you do not select a status, the authentication will be failed and it will not be marked as a valid attendance. 95 DS-K1T681 Series Face Recognition Terminal User Manual Set Auto Attendance via Web Set the attendance mode as auto, and you can set the attendance status and its available schedule. The system will automatically change the attendance status according to the configured schedule. Before You Start Add at least one user, and set the user's authentication mode. For details, see User Management. Steps 1. Click Configuration Attendance to enter the settings page. 2. Set the Attendance Mode as Auto. 3. Enable the Attendance Status function. 4. Enable a group of attendance status. Note The Attendance Property will not be changed. 5. Optional: Select an status and change its name if required. 6. Set the status' schedule. Refers to Time Settings for details. Set Manual and Auto Attendance via Web Set the attendance mode as Manual and Auto, and the system will automatically change the attendance status according to the configured schedule. At the same time you can manually change the attendance status after the authentication. Before You Start Add at least one user, and set the user's authentication mode. For details, see User Management. Steps 1. Click Configuration Attendance to enter the settings page. 2. Set the Attendance Mode as Manual and Auto. 3. Enable the Attendance Status function. 4. Enable a group of attendance status. Note The Attendance Property will not be changed. 5. Optional: Select an status and change its name if required. 6. Set the status' schedule. Refers to Time Settings for details. Result On the initial page and authenticate. The authentication will be marked as the configured attendance status according to the schedule. If you tap the edit icon on the result tab, you can select a status to take attendance manually, the authentication will be marked as the edited attendance status. 96 DS-K1T681 Series Face Recognition Terminal User Manual Example If set the Break Out as Monday 11:00, and Break In as Monday 12:00, the valid user's authentication from Monday 11:00 to 12:00 will be marked as break. 8.6.19 General Settings Set Authentication Parameters Click Configuration Access Control Authentication Settings . Note The functions vary according to different models. Refers to the actual device for details. Click Save to save the settings after the configuration. Device Type Select Main Card Reader or Sub Card Reader from the drop-down list. Main Card Reader You can configure the device card reader's parameters. Sub Card Reader You can configure the connected peripheral card reader's parameters. If select Main Card Reader:
Card Reader Type/Card Reader Description Get card reader type and description. They are read-only. Enable Card Reader Enable the card reader's function. Authentication Select an authentication mode according to your actual needs from the drop-down list. Display Authentication Result Check Face Picture, Name, or Employee ID. When authentication is completed, the system will display the selected contents in the result. Recognition Interval You can set the interval between 2 continuous recognition of a same person during the authentication. In the configured interval, Person A can only recognized once. If another person
(Person B) has recognized during the interval, Person A can recognized again. Authentication Interval You can set the authentication interval of the same person when authenticating. The same person can only authenticate once in the configured interval. A second authentication will be failed. 97 DS-K1T681 Series Face Recognition Terminal User Manual Alarm of Max. Failed Attempts Enable to report alarm when the card reading attempts reach the set value. Enable Tampering Detection Enable the anti-tamper detection for the card reader. If select Sub Card Reader:
Card Reader Type/Card Reader Description Get card reader type and description. They are read-only. Enable Card Reader Enable the card reader's function. Authentication Select an authentication mode according to your actual needs from the drop-down list. Recognition Interval If the interval between card presenting of the same card is less than the configured value, the card presenting is invalid. Authentication Interval You can set the authentication interval of the same person when authenticating. The same person can only authenticate once in the configured interval. A second authentication will be failed. Alarm of Max. Failed Attempts Enable to report alarm when the card reading attempts reach the set value. Communication with Controller Every When the access control device cannot connect with the card reader for longer than the set time, the card reader will turn offline automatically. Max. Interval When Entering Password When you entering the password on the card reader, if the interval between pressing two digits is longer than the set value, the digits you pressed before will be cleared automatically. OK LED Polarity/Error LED Polarity Set OK LED Polarity/Error LED Polarity of the access control device according to the card reader parameters. Generally, adopts the default settings. Enable Tampering Detection Enable the anti-tamper detection for the card reader. Set Card Security Click Configuration Access Control Card Security to enter the settings page. Set the parameters and click Save. 98 DS-K1T681 Series Face Recognition Terminal User Manual Enable NFC Card In order to prevent the mobile phone from getting the data of the access control, you can enable NFC card to increase the security level of the data. Enable M1 Card Enable M1 card and authenticateingby presenting M1 card is available. M1 Card Encryption Sector M1 card encryption can improve the security level of authentication. Enable the function and set the encryption sector. By default, Sector 13 is encrypted. It is recommended to encrypt sector 13. Enable EM Card Enable EM card and authenticating by presenting EM card is available. Note If the peripheral card reader supports presenting EM card, the function is also supported to enable/disable the EM card function. Enable DESFire Card The device can read the data from DESFire card when enabling the DESFire card function. DESFire Card Read Content After enable the DESFire card content reading function, the device can read the DESFire card content. Set Privacy Parameters Set the event storage type, picture upload and storage parameters, and the picture clearing parameters. Go to Configuration Access Control Privacy Event Storage Settings Select a method to delete the event. You can select from Delete Old Events Periodically, Delete Old Events by Specified Time, or Overwriting. Delete Old Events Periodically Drag the block or enter number to set the period for event deleting. All events will be deleted according to the configured time duration. Delete Old Events by Specified Time Set a time and all events will be deleted on the configured time. Overwriting 99 DS-K1T681 Series Face Recognition Terminal User Manual The earliest 5% events will be deleted when the system detects the stored events has been over 95% of the full space. Picture Uploading and Storage Upload Captured Picture When Authenticating Upload the pictures captured when authenticating to the platform automatically. Save Captured Picture When Authenticating If you enable this function, you can save the picture when authenticating to the device. Save Registered Picture The registered face picture will be saved to the system if you enable the function. Upload Picture After Linked Capture Upload the pictures captured by linked camera to the platform automatically. Save Pictures After Linked Capture If you enable this function, you can save the picture captured by linked camera to the device. Clear All Pictures in Device Note All pictures cannot be restored once they are deleted. Clear Registered Face Pictures All registered pictures in the device will be deleted. Clear Captured Pictures All captured pictures in the device will be deleted. Set Card Authentication Parameters Set the card reading content when authenticate via card on the device. Go to Configuration Access Control Card Authentication Settings . Select a card authentication mode and click Save. Full Card No. All card No. will be read. Wiegand 26 (3 bytes) The device will read card via Wiegand 26 protocol (read 3 bytes). Wiegand 34 (4 bytes) The device will read card via Wiegand 34 protocol (read 4 bytes). 100 DS-K1T681 Series Face Recognition Terminal User Manual 8.6.20 Video Intercom Settings Set Video Intercom Parameters The device can be used as a door station, outer door station, or access control device. You should set the device No. before usage. Click Configuration Video Intercom Device No. If set the device type as Door Station or Access Control Device, you can set the period No., building No., unit No., floor No., door station No., and community No. Click Save to save the settings after the configuration. Device Type Figure 8-11 Device No. Settings The device can be used as a door station or outer door station. Select a device type from the drop-down list. Note If you change the device type, you should reboot the device. Period No. Set the device installed period No. 101 DS-K1T681 Series Face Recognition Terminal User Manual Building No. Set the device installed building No. Unit No. Set the device installed unit No. Floor No. Set the device installed floor No. Door Station No. Set the device installed floor No. Note If you change the No., you should reboot the device. Community No. Set the device installed community No. If set the device type as Outer Door Station, you can set the period No., outer door station No., and community No. Period No. Set the device installed period No. Outer Door Station No. If you select outer door station as the device type, you should enter a number between 1 and 99. Note If you change the No., you should reboot the device. Community No. Set the device installed community No. Configure SIP Parameters Set the device's IP address and the SIP server's IP address. After setting the parameters, you can communicate among the access control device, door station, indoor station, main station, and the platform. Note Only the access control device and other devices or systems (such as door station, indoor station, main station, platform) are in the same IP segment, the two-way audio can be performed. Go to Configuration Access Control Linked Network Settings . Set the main station's IP address and SIP server's IP address. 102 DS-K1T681 Series Face Recognition Terminal User Manual Click Save. Press Button to Call Steps 1. Click Intercom Press Button to Call to enter the settings page. 2. Set the parameters.
- Edit call No. for every button.
- Check Call Management Center to set the button calling center. Note If you check Call Management Center and set the call No. as well, call management center has higher privilege than call No. 8.6.21 Access Control Settings Set Door Parameters Click Configuration Access Control Door Parameters . Click Save to save the settings after the configuration. Figure 8-12 Door Parameters Settings Page 103 DS-K1T681 Series Face Recognition Terminal User Manual Door No. Select the device corresponded door No. Name You can create a name for the door. Open Duration Set the door unlocking duration. If the door is not opened for the set time, the door will be locked. Door Open Timeout Alarm An alarm will be triggered if the door has not been closed within the configured time duration. Door Contact You can set the door contact as Remain Open or Remain Closed according to your actual needs. By default, it is Remain Closed. Exit Button Type You can set the exit button as Remain Open or Remain Closed according to your actual needs. By default, it is Remain Open. Door Lock Powering Off Status You can set the door lock status when the door lock is powering off. By default, it is Remain Closed. Extended Open Duration The door contact can be enabled with appropriate delay after person with extended access needs swipes her/his card. Door Remain Open Duration with First Person Set the door open duration when first person is in. After the first person is authorized, it allows multiple persons access the door or other authentication actions. Duress Code The door can open by inputting the duress code when there is duress. At the same time, the client can report the duress event. Super Password The specific person can open the door by inputting the super password. Note The duress code and the super code should be different. Set RS-485 Parameters You can set the RS-485 parameters including the peripheral, address, baud rate, etc. Click Configuration Access Control RS-485 Settings . 104 DS-K1T681 Series Face Recognition Terminal User Manual Click Save to save the settings after the configuration. No. Set the RS-485 No. Peripheral Type Select a peripheral from the drop-down list according the actual situation. You can select from Card Reader, Extension Module, Access Controller, or Disable. Note After the peripheral is changed and saved, the device will reboot automatically. RS-485 Address Set the RS-485 Address according to your actual needs. Note If you select Access Controller: If connect the device to a terminal via the RS-485 interface, set the RS-485 address as 2. If you connect the device to a controller, set the RS-485 address according to the door No. Baud Rate The baud rate when the devices are communicating via the RS-485 protocol. Set Wiegand Parameters You can set the Wiegand transmission direction. Steps Note Some device models do not support this function. Refer to the actual products when configuration. 1. Click Configuration Access Control Wiegand Settings . Figure 8-13 Wiegand Page 2. Check Wiegand to enable the Wiegand function. 3. Set a transmission direction. Input 105 DS-K1T681 Series Face Recognition Terminal User Manual The device can connect a Wiegand card reader. Output The can connect an external access controller. And the two devices will transmit the card No. via Wiegand 26 or 34. 4. Click Save to save the settings. Note If you change the peripheral, and after you save the device parameters, the device will reboot automatically. 8.6.22 Set Biometric Parameters Set Basic Parameters Click Configuration Smart Smart . Note The functions vary according to different models. Refers to the actual device for details. 106 DS-K1T681 Series Face Recognition Terminal User Manual Click Save to save the settings after the configuration. Face Anti-spoofing Figure 8-14 Smart Settings Page Enable or disable the live face detection function. If enabling the function, the device can recognize whether the person is a live one or not. Note Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher security level, use multiple authentication modes. Recognition Distance Select the distance between the authenticating user and the device camera. Application Mode Select either others or indoor according to actual environment. 107 DS-K1T681 Series Face Recognition Terminal User Manual Face Recognition Mode Normal Mode Recognize face via the camera normally. Deep Mode The device can recognize a much wider people range than the normal mode. This mode is applicable to a more complicated environment. Continuous Face Recognition Interval Set the time interval between two continuous face recognitions when authenticating. Pitch Angle The maximum pitch angle when starting face authentication. Yaw Angle The maximum yaw angle when starting face authentication. Face Grading Set the face grading according to your needs. 1:1 Matching Threshold Set the matching threshold when authenticating via 1:1 matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. 1:N Matching Threshold Set the matching threshold when authenticating via 1:N matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. Face Recognition Timeout Value Set the timeout value when face recognizing. If the face recognition time is longer than the configured value, the system will pop up a prompt. ECO Mode After enabling the ECO mode, the device will use the IR camera to authenticate faces in the low light or dark environment. And you can set the ECO mode threshold, ECO mode (1:N), and ECO mode (1:1). ECO Mode (1:1) Set the matching threshold when authenticating via ECO mode 1:1 matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. ECO Mode (1:N) Set the matching threshold when authenticating via ECO mode 1:N matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate Enable Hard Hat Detection After enabling the hard hat detection, you can set the strategy. None 108 DS-K1T681 Series Face Recognition Terminal User Manual The function is disabled. The device will not detect whether a person is wearing a hard hat or not. Reminder of Wearing Hard Hat If the person do not wear the hard hat when authenticating, the device will pop up a prompt and the door will open. Must Wear Hard Hat If the person do not wear the hard hat when authenticating, the device will pop up a prompt and the door will keep closed. Face with Mask Detection After enabling the face with mask detection, the system will recognize the captured face with mask picture. You can set face with mask1:N matching threshold, it's ECO mode, and the strategy. None The device will detect the face with mask without prompt. Reminder of Wearing Face Mask If the person do not wear a face mask when authenticating, the device prompts a notification and the door will open. Must Wear Face Mask If the person do not wear a face mask when authenticating, the device prompts a notification and the door keeps closed. Face with Mask 1:N Matching Threshold Set the matching threshold when authenticating with face mask via 1:N matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. Face with Mask 1:N Matching Threshold (ECO Mode) Set the matching threshold when authenticating with face mask via ECO mode 1:N matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate Fingerprint Security Level Select the fingerprint security level. The higher is the security level, the lower is the false acceptance rate (FAR). The higher is the security level, the higher is the false rejection rate (FRR). Set Recognition Area Click Configuration Smart Area Configuration . Drag the yellow frame in the live video to adjust the recognition area. Only the face within the area can be recognized by the system. Click Save to save the settings. Click to record videos or capture pictures. or 109 DS-K1T681 Series Face Recognition Terminal User Manual 8.6.23 Set Theme You can set the theme for the device. Click Configuration Theme . Figure 8-15 Notice Page Display Mode You can select from Authentication, Advertisement or Simple. Authentication After selecting this mode, the device displays the video preview screen and performs authentication. Advertisement After selecting this mode, the advertising area and identification authentication area of the device will be displayed on separate screens. Video and advertising information playback, welcome speech display are supported. Note Up to 8 images and 3 videos can be uploaded. And the images should be JPG format and the videos should be MP4 format. Simple After selecting this mode, the live view of the authentication page will be disabled, and in the meanwhile, the person's name, employee ID, face pictures will all be hidden. 110 DS-K1T681 Series Face Recognition Terminal User Manual Sleep Enable Sleep and the device will enter the sleep mode when no operation within the configured sleep time. Sleep after Set the device sleeping waiting time (second). Theme Management You can click + in the frame and upload the screen saver pictures from the local PC. Note By now, there is only one theme can be added. Play Schedule After you have created a theme, you can select the theme and draw a schedule on the time line. Select the drawn schedule and you can edit the exact start and end time. Select the drawn schedule and you can click Delete or Delete All to delete the schedule. Slide Show Interval Drag the block or enter the number to set the slide show interval. The picture will be changed according to the interval. 111 DS-K1T681 Series Face Recognition Terminal User Manual Chapter 9 Client Software Configuration You can call the hotline to get the iVMS-4200 client software installation package. You can call the hotline to get the Guarding Vision client software installation package. 9.1 Configuration Flow of Client Software Follow the flow diagram below to configure on the client software. Figure 9-1 Flow Diagram of Configuration on Client Software 112 DS-K1T681 Series Face Recognition Terminal User Manual 9.2 Device Management The client supports various types of devices including network camera, DVR (Digital Video Recorder), NVR (Network Video Recorder), security control panel, video intercom device, access control device, etc. The client supports various types of devices including network camera, DVR
(Digital Video Recorder), NVR (Network Video Recorder), etc. The client supports managing access control devices and video intercom devices. Example You can view live view or playback after adding encoding devices to the client; you can arm or disarm zones of a security control panel, receive alarm notifications after adding a security control panel to the client; and you can control entrance & exit and manage attendance after adding access control devices to the client. Example You can view live view or playback after adding encoding devices to the client; you can arm or disarm zones of a security control panel, receive alarm notifications after adding a security control panel to the client. Example You can control entrance & exit and manage attendance after adding access control devices to the client; you can perform video intercom with the indoor stations and door stations. 9.2.1 Add Device The client provides various device adding modes including IP/domain, IP segment, cloud P2P, ISUP protocol, and HiDDNS.The client provides various device adding modes including IP/domain, IP segment, cloud P2P, and HiDDNS.The client provides three device adding modes including by IP/
domain, IP segment, and ISUP protocol. The client also supports importing multiple devices in a batch when there are large amount of devices to be added. Add Online Device The active online devices in the same local subnet with the client software will be displayed on the Online Device area. You can click Refresh Every 60s to refresh the information of the online devices. Add a Detected Online Device You can select a detected online device displayed in the online device list and add it to the client. Steps 1. Enter the Device Management module. 113 DS-K1T681 Series Face Recognition Terminal User Manual 2. Click Device tab on the top of the right panel. 3. Click Online Device to show the online device area. The searched online devices are displayed in the list. 4. Select an online device in the Online Device area, and click Add to open the device adding Figure 9-2 Select Online Device window. Note For the inactive device, you need to create the password for it before you can add the device properly. For detailed steps, refer to . 114 DS-K1T681 Series Face Recognition Terminal User Manual Figure 9-3 Add Online Device 5. Enter the required information. Name Enter a descriptive name for the device. IP Address Enter the device's IP address. The IP address of the device is obtained automatically in this adding mode. Port 115 DS-K1T681 Series Face Recognition Terminal User Manual You can customize the port number. The port number of the device is obtained automatically in this adding mode. User Name By default, the user name is admin. Password Enter the device password. Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product. Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user. 6. Optional: Check Transmission Encryption (TLS) to enable transmission encryption using TLS
(Transport Layer Security) protocol for security purpose. Note This function should be supported by the device. If you have enabled Certificate Verification, you should click Open Certificate Directory to open the default folder, and copy the certificate file exported from the device to this default directory to strengthen the security. See for details about enabling certificate verification. You can log into the device to get the certificate file by web browser. 7. Check Synchronize Time to synchronize the device time with the PC running the client after adding the device to the client. 8. Optional: Check Import to Group to create a group by the device name, and import all the channels of the device to this group. Example For encoding device, its encoding channels and alarm inputs/outputs will be imported to this group. For access control device, its access points, alarm inputs/outputs, and encoding channels (if exist) will be imported to this group. 9. Click Add. 10. Optional: Perform the following operation(s). Remote Configuration Click corresponding device. on Operation column to set remote configuration of the 116 DS-K1T681 Series Face Recognition Terminal User Manual Note See the user manual of the device for details. Device Status Click cameras, recording status, signal status, hardware status, etc. on Operation column to view device status, including Edit Device Information Click such as IP address, user name, and password. on Operation column to edit the device information, Check Online User on Operation column to check the online users who Click access the device, such as user name, user type, user's IP address, and login time. Refresh Delete Device Click information. on Operation column to get the latest device Select one or multiple devices and click Delete to delete the selected device(s) from the client. Add Multiple Detected Online Devices For detected online devices sharing the same user name and password, you can add them to the client in a batch. Before You Start Make sure the to-be-added devices are online. Steps 1. Enter the Device Management module. 2. Click Device tab on the top of the right panel. 3. Click Online Device to show the online device area at the bottom of the page. The searched online devices are displayed in the list. 4. Select multiple devices. Note For the inactive device, you need to create the password for it before you can add the device properly. For details, refer to . 5. Click Add to open the device adding window. 6. Enter the required information. User Name By default, the user name is admin. Password Enter the device password. 117 DS-K1T681 Series Face Recognition Terminal User Manual Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product. Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user. 7. Optional: Check Synchronize Time to synchronize the device time with the PC running the client after adding the device to the client. 8. Optional: Check Import to Group to create a group by the device name, and import all the channels of the device to this group. Example For encoding device, its encoding channels and alarm inputs/outputs will be imported to this group. For access control device, its access points, alarm inputs/outputs, and encoding channels (if exist) will be imported to this group. 9. Click Add to add the devices. 10. Optional: Perform the following operation(s). Remote Configuration Click corresponding device. on Operation column to set remote configuration of the Note See the user manual of the device for details. Device Status Click cameras, recording status, signal status, hardware status, etc. on Operation column to view device status, including Edit Device Information Click such as IP address, user name, and password. on Operation column to edit the device information, Check Online User on Operation column to check the online users who Click access the device, such as user name, user type, user's IP address, and login time. Refresh Delete Device Click information. on Operation column to get the latest device Select one or multiple devices and click Delete to delete the selected device(s) from the client. 118 DS-K1T681 Series Face Recognition Terminal User Manual Add Device by IP Address or Domain Name If you know the IP address or domain name of the device to add, you can add devices to the client by specifying the IP address (or domain name), user name, password, etc. Steps 1. Enter Device Management module. 2. Click Device tab on the top of the right panel. The added devices are displayed on the right panel. Figure 9-4 Add Device by IP Address or Domain Name 3. Click Add to open the Add window, and then select IP/Domain as the adding mode. 119 DS-K1T681 Series Face Recognition Terminal User Manual 4. Enter the required information. Name Create a descriptive name for the device. For example, you can use a nickname that can show the location or feature of the device. Address The IP address or domain name of the device. Port The devices to add share the same port number. The default value is 8000. User Name Enter the device user name. By default, the user name is admin. Password Enter the device password. Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product. Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user. 5. Optional: Add the offline devices. 1) Check Add Offline Device. 2) Enter the required information, including the device channel number and alarm input number. Note After adding the offline device to the client, the device network status will be displayed as
"Offline"; When the device comes online, the device network status will turn to "Online", and the client will connect it automatically. 6. Optional: Check Transmission Encryption (TLS) to enable transmission encryption using TLS
(Transport Layer Security) protocol for security purpose. Note This function should be supported by the device. If you have enabled Certificate Verification, you should click Open Certificate Directory to open the default folder, and copy the certificate file exported from the device to this default directory to strengthen the security. See for details about enabling certificate verification. You can log into the device to get the certificate file by web browser. 120 DS-K1T681 Series Face Recognition Terminal User Manual 7. Check Synchronize Time to synchronize the device time with the PC running the client after adding the device to the client. 8. Optional: Check Import to Group to create a group by the device name, and import all the channels of the device to this group. Example For encoding device, its encoding channels and alarm inputs/outputs will be imported to this group. For access control device, its access points, alarm inputs/outputs, and encoding channels (if exist) will be imported to this group. 9. Finish adding the device.
- Click Add to add the device and back to the device list page.
- Click Add and New to save the settings and continue to add other device. 10. Optional: Perform the following operation(s). Remote Configuration Click corresponding device. on Operation column to set remote configuration of the Note For detail operation steps for the remote configuration, see the user manual of the device. Device Status Click cameras, recording status, signal status, hardware status, etc. on Operation column to view device status, including Edit Device Information Click such as IP address, user name, and password. on Operation column to edit the device information, Check Online User on Operation column to check the online users who Click access the device, such as user name, user type, user's IP address, and login time. Refresh Delete Device Click information. on Operation column to get the latest device Select one or multiple devices and click Delete to delete the selected device(s) from the client. Add Devices by IP Segment If the devices share the same port No., user name and password, and their IP addresses ranges in the same IP segment, you can add them to the client by specifying the start IP address and the end IP address, port No., user name, password, etc of the devices. Steps 1. Enter the Device Management module. 121 DS-K1T681 Series Face Recognition Terminal User Manual 2. Click Device tab on the top of the right panel. The added devices are displayed on the right panel. 3. Click Add to open the Add window. Figure 9-5 Add Device by IP Segment 4. Select IP Segment as the adding mode. 5. Enter the required information. Start IP Enter a start IP address. End IP Enter an end IP address in the same network segment with the start IP. 122 DS-K1T681 Series Face Recognition Terminal User Manual Port Enter the device port No. The default value is 8000. User Name By default, the user name is admin. Password Enter the device password. Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product. Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user. 6. Optional: Add the offline devices. 1) Check Add Offline Device. 2) Enter the required information, including the device channel number and alarm input number. Note After adding the offline device to the client, the device network status will be displayed as
"Offline"; When the device comes online, the device network status will turn to "Online", and the client will connect it automatically. 7. Optional: Check Transmission Encryption (TLS) to enable transmission encryption using TLS
(Transport Layer Security) protocol for security purpose . Note This function should be supported by the device. If you have enabled Certificate Verification, you should click Open Certificate Folder to open the default folder, and copy the certificate file exported from the device to this default directory to strengthen the security. See for details about enabling certificate verification. You can log into the device to get the certificate file by web browser. 8. Check Synchronize Time to synchronize the device time with the PC running the client after adding the device to the client. 9. Optional: Check Import to Group to create a group by the device name, and import all the channels of the device to the group. 10. Finish adding the device.
- Click Add to add the device and back to the device list page.
- Click Add and New to save the settings and continue to add other device. 123 DS-K1T681 Series Face Recognition Terminal User Manual 11. Optional: Perform the following operation(s). Remote Configuration Click corresponding device. on Operation column to set remote configuration of the Note For detail operation steps for the remote configuration, see the user manual of the device. Device Status Click cameras, recording status, signal status, hardware status, etc. on Operation column to view device status, including Edit Device Information Click such as IP address, user name, and password. on Operation column to edit the device information, Check Online User on Operation column to check the online users who Click access the device, such as user name, user type, user's IP address, and login time. Refresh Delete Device Click information. on Operation column to get the latest device Select one or multiple devices and click Delete to delete the selected device(s) from the client. Add Device by ISUP Account For access control devices supports ISUP 5.0 protocol, you can add them to the client by ISUP protocol after entering device ID and key, if you have configured their server addresses, port No., and device IDs. Before You Start Make sure the devices have connected to the network properly. Steps 1. Enter Device Management module. The added devices are displayed on the right panel. 2. Click Add to open the Add window. 3. Select ISUP as the adding mode. 4. Enter the required information. Device Account Enter the account name registered on ISUP protocol. ISUP Key For ISUP 5.0 devices, enter the ISUP key if you have set it when configuring network center parameter for the device. 124 DS-K1T681 Series Face Recognition Terminal User Manual Note This function should be supported by the device. 5. Optional: Check Synchronize Time to synchronize the device time with the PC running the client after adding the device to the client. 6. Optional: Check Import to Group to create a group by the device name, and import all the channels of the device to the group. 7. Finish adding the device.
- Click Add to add the device and go back to the device list.
- Click Add and New to save the settings and continue to add other device. Note Face pictures cannot be applied to devices added by ISUP account except DS-K1T671 series and DS-K1T331 series. 8. Optional: Perform the following operation(s). Device Status Click on Operation column to view device status. Edit Device Information Click device name, device account, and ISUP key. on Operation column to edit the device information, such as Check Online User on Operation column to check the online users who access Click the device, such as user name, user type, user's IP address, and login time. Refresh Click on Operation column to get the latest device information. Delete Device Select one or multiple devices and click Delete to delete the selected device(s) from the client. Import Devices in a Batch You can add multiple devices to the client in a batch by entering the device parameters in a pre-
defined CSV file. Steps 1. Enter the Device Management module. 2. Click Device tab on the top of the right panel. 3. Click Add to open the Add window, and then select Batch Import as the adding mode. 125 DS-K1T681 Series Face Recognition Terminal User Manual 4. Click Export Template and then save the pre-defined template (CSV file) on your PC. 5. Open the exported template file and enter the required information of the devices to be added Figure 9-6 Add Devices in a Batch on the corresponding column. Note For detailed description of the required fields, refer to the introductions in the template. Adding Mode Enter 0 or 1 or 2. Address Edit the address of the device. Port Enter the device port number. The default port number is 8000. User Name Enter the device user name. By default, the user name is admin. Password Enter the device password. Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend 126 DS-K1T681 Series Face Recognition Terminal User Manual you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product. Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user. Add Offline Device Enter 1 to enable adding an offline device. After adding the offline device to the client, the device network status will be displayed as
"Offline"; When the device comes online, the device network status will turn to "Online", and the client will connect it automatically. Enter 0 to disable adding an offline device. Import to Group Enter 1 to create a group by the device name. All the channels of the device will be imported to the corresponding group by default. Enter 0 to disable this function. Channel Number If you enable Add Offline Device, enter the channel number of the device. If you disable Add Offline Device, this field is not required. Alarm Input Number If you enable Add Offline Device, enter the alarm input number of the device. If you disable Add Offline Device, this field is not required. and select the template file. 6. Click 7. Click Add to import the devices. 8. Optional: Perform the following operation(s). Remote Configuration Click corresponding device. on Operation column to set remote configuration of the Note For detail operation steps for the remote configuration, see the user manual of the device. Device Status Click cameras, recording status, signal status, hardware status, etc. on Operation column to view device status, including Edit Device Information Click IP address, user name, and password. on Operation column to edit the device information, such as Check Online User on Operation column to check the online users who access Click the device, such as user name, user type, user's IP address, and login time. Refresh Click on Operation column to get the latest device information. Delete Device Select one or multiple devices and click Delete to delete the selected device(s) from the client. 127 DS-K1T681 Series Face Recognition Terminal User Manual 9.2.2 Reset Device Password If you forgot the password of the detected online devices, you can reset the device password via the client. Steps 1. Enter Device Management page. 2. Click Device tab on the top of the right panel. 3. Click Online Device to show the online device area. All the online devices sharing the same subnet will be displayed in the list. 4. Select the device from the list and click 5. Reset the device password. on the Operation column.
- Click Export to save the device file on your PC and then send the file to our technical support. Note For the following operations for resetting the password, contact our technical support.
- Click Generate to pop up the QR Code window and click Download to save the QR code to your PC. You can also take a photo of the QR code to save it to your phone. Send the picture to our technical support. Note For the following operations for resetting the password, contact our technical support.
- Select the Safe Mode according to actual needs. Note For the following operations for resetting the password, contact our technical support. Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product. Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user. 9.3 Group Management The client provides groups to manage the added resources in different groups. You can group the resources into different groups according to the resources' locations. 128 DS-K1T681 Series Face Recognition Terminal User Manual Example For example, on the 1st floor, there mounted 64 cameras, 16 doors, 64 alarm inputs, and 16 alarm outputs. You can organize these resources into one group (named 1st Floor) for convenient management. You can get the live view, play back the video files, control door status, and do some other operations of the devices after managing the resources by groups. 9.3.1 Add Group You can add group to organize the added device for convenient management. Steps 1. Enter the Device Management module. 2. Click Device Management Group to enter the group management page. 3. Create a group.
- Click Add Group and enter a group name as you want.
- Click Create Group by Device Name and select an added device to create a new group by the name of the selected device. Note The resources (such as encoding channels, alarm inputs/outputs, access points, etc.) of this device will be imported to the group by default. 9.3.2 Import Resources to Group You can import the device resources (such as encoding channels, alarm inputs/outputs, access points, etc.) to the added group in a batch. Before You Start Add a group for managing devices. Refer to Add Group . Steps 1. Enter the Device Management module. 2. Click Device Management Group to enter the group management page. 3. Select a group from the group list and select the resource type as Encoding Channel, Alarm Input, Alarm Output, Zone, Access Point, etc. 4. Select a group from the group list and select the resource type as Encoding Channel, Alarm Input, Alarm Output, Zone, etc. 5. Select a group from the group list and select the resource type as Access Point, Alarm Input, Alarm Output, etc. 6. Click Import. 7. Select the thumbnails/names of the resources in the thumbnail/list view. 129 DS-K1T681 Series Face Recognition Terminal User Manual Note You can click or to switch the resource display mode to thumbnail view or to list view. 8. Click Import to import the selected resources to the group. 9.3.3 Edit Resource Parameters After importing the resources to the group, you can edit the resource parameters. For encoding channel, you can edit the channel name, stream type, protocol type, etc. For access point, you can edit the access point name. For alarm input, you can edit the alarm input name. Here we take encoding channelaccess point as an example. Before You Start Import the resources to group. Steps 1. Enter the Device Management module. 2. Click Device Management Group to enter the group management page. All the added groups are displayed on the left. 3. Select a group on the group list and click Encoding Channel Access Point. The encoding channelsaccess points imported to the group will display. in the Operation column to open the Edit Resource window. 4. Click 5. Edit the camera information, including the camera name, the stream type, etc. Video Stream Select the stream type for live view of the camera as desired. Note You should start live view again to take effect. Playback Stream Type Select the stream type for playback of the camera as desired. Note This field will display if the device supports dual-stream. You should start live view again to take effect. Rotation Type Select the rotate type for the live view or playback of the camera as desired. Protocol Type Select the transmission protocol for the camera. 130 DS-K1T681 Series Face Recognition Terminal User Manual Note You should start live view again to take effect. Streaming Protocol Select the protocol as RTSP or private for getting stream when live view. Note You should start live view again to take effect. Stream Media Server Get stream of the camera via stream media server. You can select and manage the available stream media server. Copy to Copy the configured parameters to other camera(s). Refresh Get a new captured picture for the live view of the camera. 6. Edit the resource name. 7. Click OK to save the new settings. 9.3.4 Remove Resources from Group You can remove the added resources from the group. Steps 1. Enter the Device Management module. 2. Click Device Management Group to enter the group management page. All the added groups are displayed on the left. 3. Click a group to show the resources added to this group. 4. Select the resource(s) and click Delete to remove the resource(s) from the group. 9.4 Person Management You can add person information to the system for further operations such as access control, video intercom, time and attendance, etc. You can manage the added persons such as issuing cards to them in a batch, importing and exporting person information in a batch, etc. 9.4.1 Add Organization You can add an organization and import person information to the organization for effective management of the persons. You can also add a surbodinate organization for the added one. 131 DS-K1T681 Series Face Recognition Terminal User Manual Steps 1. Enter Person module. 2. Select a parent organization in the left column and click Add in the upper-left corner to add an organization. 3. Create a name for the added organization. Note Up to 10 levels of organizations can be added. 4. Optional: Perform the following operation(s). Edit Organization Hover the mouse on an added organization and click name. to edit its Delete Organization Hover the mouse on an added organization and click to delete it. Note The lower-level organizations will be deleted as well if you delete an organization. Make sure there is no person added under the organization, or the organization cannot be deleted. Show Persons in Sub Organization Check Show Persons in Sub Organization and select an organization to show persons in its sub organizations. 9.4.2 Configure Basic Information You can add person to the client software one by one and configure the person's basic information such as name, gender, phone number, etc. Steps 1. Enter Person module. 2. Select an organization in the organization list to add the person. 3. Click Add to open the adding person window. The Person ID will be generated automatically. 4. Enter the basic information including person name, gender, tel, email address, etc. 5. Optional: Set the effective period of the person. Once expired, the credentials and access control settings of the person will be invalid and the person will have no authorization to access the doors\floors. Example For example, if the person is a visitor, his/her effective period may be short and temporary. 6. Confirm to add the person.
- Click Add to add the person and close the Add Person window.
- Click Add and New to add the person and continue to add other persons. 132 DS-K1T681 Series Face Recognition Terminal User Manual 9.4.3 Issue a Card by Local Mode If a card enrollment station is available, you can issue a card by local mode. To read the card number, you should connect the card enrollment station to the PC running the client by USB interface or COM, and place the card on the card enrollment station. Steps 1. Enter Person module. 2. Select an organization in the organization list to add the person and click Add to enter Add Person panel. Note Enter the person's basic information first. For details about configuring person's basic information, refer to Configure Basic Information . 3. In the Credential Card area, click +
. 4. Click Settings to enter the Settings page. 5. Select Local as the card issuing mode. 133 DS-K1T681 Series Face Recognition Terminal User Manual Figure 9-7 Issue a Card by Local Mode 6. Set other related parameters. Card Enrollment Station Select the model of the connected card enrollment station. Note Currently, the supported card enrollment station models include DS-K1F100-D8, DS-K1F100-
M, DS-K1F100-D8E, and DS-K1F180-D8E. Card Type This field is only available when the model is DS-K1F100-D8E or DS-K1F180-D8E. Select the card type as EM card or Mifare card according to the actual card type. Buzzing 134 DS-K1T681 Series Face Recognition Terminal User Manual Enable or disable the buzzing when the card number is read successfully. Card No. Type Select the type of the card number according to actual needs. M1 Card Encryption This field is only available when the model is DS-K1F100-D8, DS-K1F100-D8E, or DS-K1F180-
D8E. If the card is M1 card, then you can enable the M1 Card Encryption function and select the sector of the card to encrypt. 7. Click OK to confirm the operation. 8. Place the card on the card enrollment station, and click Read to get the card number. The card number will display in the Card No. field automatically. 9. Click Add. The card will be issued to the person. 9.4.4 Upload a Face Photo from Local PC When adding person, you can upload a face photo stored in local PC to the client as the person's profile. Steps 1. Enter Person module. 2. Select an organization in the organization list to add the person and click Add. Note Enter the person's basic information first. For details about configuring person's basic information, refer to Configure Basic Information . 3. Click Add Face in the Basic Information panel. 4. Select Upload. 5. Select a picture from the PC running the client. Note The picture should be in JPG or JPEG format and smaller than 200 KB. 6. Optional: Enable Verify by Device to check whether the facial recognition device managed in the client can recognize the face in the photo. 7. Confirm to add the person.
- Click Add to add the person and close the Add Person window.
- Click Add and New to add the person and continue to add other persons . 9.4.5 Take a Photo via Client When adding person, you can take a photo of the person by the webcam of the PC running the client and set this photo as the person's profile. 135 DS-K1T681 Series Face Recognition Terminal User Manual Before You Start Add at least one access control device checking whether the face in the photo can be recognized by the facial recognition device managed by the client. Steps 1. Enter Person module. 2. Select an organization in the organization list to add the person and click Add. Note Enter the person's basic information first. For details about configuring person's basic information, refer to Configure Basic Information . 3. Click Add Face in the Basic Information panel. 4. Select Take Photo. 5. Connect the face scanner to the PC running the client. 6. Optional: Enable Verify by Device to check whether the facial recognition device managed in the client can recognize the face in the photo. 7. Take a photo. 1) Face to the webcam of the PC and make sure your face is in the middle of the collecting window. to capture a face photo. 2) Click 3) Optional: Click 4) Click OK to save the captured photo. to capture again. 8. Confirm to add the person.
- Click Add to add the person and close the Add Person window.
- Click Add and New to add the person and continue to add other persons. 9.4.6 Collect Face via Access Control Device When adding person, you can collect the person's face via access control device added to the client which supports facial recognition function. Steps 1. Enter Person module. 2. Select an organization in the organization list to add the person and click Add. Note Enter the person's basic information first. For details about configuring person's basic information, refer to Configure Basic Information . 3. Click Add Face in the Basic Information panel. 4. Select Remote Collection. 5. Select an access control device which supports face recognition function from the drop-down list. 6. Collect face. 136 DS-K1T681 Series Face Recognition Terminal User Manual 1) Face to the camera of the selected access control device and make sure your face is in the middle of the collecting window. 2) Click 3) Click OK to save the captured photo. to capture a photo. 7. Confirm to add the person.
- Click Add to add the person and close the Add Person window.
- Click Add and New to add the person and continue to add other persons . 9.4.7 Collect Fingerprint via Client Collecting fingerprints locally means you can collect the fingerprint via the fingerprint recorder connected directly to the PC running the client. The fingerprints recorded can be used as credentials of the persons to access the authorized doors. Before You Start Connect the fingerprint recorder to the PC running the client. Steps 1. Enter Person module. 2. Select an organization in the organization list to add the person and click Add. Note Enter the person's basic information first. For details about configuring person's basic information, refer to Configure Basic Information . 3. In the Credential Fingerprint panel, click +
4. In the pop-up window, select the collection mode as Local. 5. Select the model of the connected fingerprint recorder. Note If the fingerprint recorder is DS-K1F800-F, you can click Settings to select the COM the fingerprint recorder connects to. 6. Collect the fingerprint. 1) Click Start. 2) Place and lift your fingerprint on the fingerprint recorder to collect the fingerprint. 3) Click Add to save the recorded fingerprint. 7. Confirm to add the person.
- Click Add to add the person and close the Add Person window.
- Click Add and New to add the person and continue to add other persons. Note Once the fingerprint is added, the fingerprint type cannot be changed. 137 DS-K1T681 Series Face Recognition Terminal User Manual 9.4.8 Collect Fingerprint via Access Control Device When adding person, you can collect fingerprint information via the access control device's fingerprint module. The fingerprints recorded can be used as credentials of the persons to access the authorized doors. Before You Start Make sure fingerprint collection is supported by the access control device. Steps 1. Enter Person module. 2. Select an organization in the organization list to add the person and click Add. Note Enter the person's basic information first. For details about configuring person's basic information, refer to Configure Basic Information . 3. In the Credential Fingerprint panel, click +
4. In the pop-up window, select the collection mode as Remote. 5. Select an access control device which supports fingerprint recognition function from the drop-
. down list. 6. Collect the fingerprint. 1) Click Start. 2) Place and lift your fingerprint on the fingerprint scanner of the selected access control device to collect the fingerprint. 3) Click Add to save the recorded fingerprint. 7. Confirm to add the person.
- Click Add to add the person and close the Add Person window.
- Click Add and New to add the person and continue to add other persons . Note Once the fingerprint is added, the fingerprint type cannot be changed. 9.4.9 Configure Access Control Information When adding a person, you can set her/his access control information, such as binding an access control group with the person, configuring PIN code, setting the person as a visitor, a blocklist person, or a super user, etc. Steps 1. Enter Person module. 2. Select an organization in the organization list to add the person and click Add. 3. In the Access Control area, click to select access group(s) for the person. 138 DS-K1T681 Series Face Recognition Terminal User Manual Note For details, refer to Set Access Group to Assign Access Authorization to Persons . Figure 9-8 Configure Access Control Information 4. Set a unique PIN code for the person which can be used for access authentication.
- Manually enter a PIN code containing 4 to 8 digits. Note Persons' PIN codes cannot be repeated.
- Click Generate to randomly generate an unrepeated PIN code of 6 digits. Note If there are repeated PIN codes, a prompt will pop up on the client. The admin can generate a new PIN code to replace the repeated PIN code and notify related persons. 5. Check the person's operation permissions. Super User 139 DS-K1T681 Series Face Recognition Terminal User Manual If the person is set as a super user, he/she will have authorization to access all the doors/
floors and will be exempted from remaining closed restrictions, all anti-passback rules, and first person authorization. Extended Door Open Time Use this function for persons with reduced mobility. When accessing the door, the person will have more time than others to pass through doors. For details about setting the door's open duration, refer to Configure Parameters for Door/
Elevator . Add to Blocklist Add the person to the blocklist and when the person tries to access doors/floors, an event will be triggered and sent to the client to notify the security personnel. Mark as Visitor If the person is a visitor, you should set the her/his valid times for visit. Note The valid times for visit is between 1 and 100. You can also check No Limit, then there are no limited times for the visitor to access doors/floors. Device Operator For person with device operator role, he/she is authorized to operate on the access control devices. Note The Super User, Extended Door Open Time, Add to Blocklist, and Mark as Visitor functions cannot be enabled concurrently. For example, if one person is set as super user, you cannot enable extended door open time for her/him, add her/him to the blocklist, or set her/him as visitor. 6. Confirm to add the person.
- Click Add to add the person and close the Add Person window.
- Click Add and New to add the person and continue to add other persons. 9.4.10 Customize Person Information You can customize the person properties which are not pre-defined in the client according to actual needs, e.g., place of birth. After customizing, when add a person, you can enter the custom information to make the person information complete. Steps 1. Enter Person module. 2. Set the fields of custom information. 1) Click Custom Property. 2) Click Add to add a new property. 140 DS-K1T681 Series Face Recognition Terminal User Manual 3) Enter the property name. 4) Click OK. 3. Set the custom information when adding a person. 1) Select an organization in the organization list to add the person and click Add. Note Enter the person's basic information first. For details about configuring person's basic information, refer to Configure Basic Information . 2) In the Custom Information panel, enter the person information. 3) Click Add to add the person and close the Add Person window, or click Add and New to add the person and continue to add other persons. 9.4.11 Configure Resident Information If the person is resident, for video intercom purpose, you need to set the room number for her/him and bind an indoor station. After bound, you can call this person by calling the indoor station and perform video intercom with her/him. Steps 1. Enter Person module. 2. Select an organization in the organization list to add the person and click Add. Note Enter the person's basic information first. For details about configuring person's basic information, refer to Configure Basic Information . 3. In the Resident Information panel, select the indoor station to bind it to the person. Note If you select Analog Indoor Station, the Door Station field will display and you are required to select the door station to communicate with the analog indoor station. 4. Enter the floor No. and room No. of the person. 5. Confirm to add the person.
- Click Add to add the person and close the Add Person window.
- Click Add and New to add the person and continue to add other persons. 9.4.12 Configure Additional Information When adding person, you can configure the additional information for the person, such as person's identity type, identity No., country, etc., according to actual needs. Steps 1. Enter Person module. 2. Select an organization in the organization list to add the person and click Add. 141 DS-K1T681 Series Face Recognition Terminal User Manual Note Enter the person's basic information first. For details about configuring person's basic information, refer to Configure Basic Information . 3. In the Additional Information panel, enter the additional information of the person, including person's ID type, ID No., job title, etc., according to actual needs. 4. Confirm to add the person.
- Click Add to add the person and close the Add Person window.
- Click Add and New to add the person and continue to add other persons . 9.4.13 Import and Export Person Identify Information You can import the information and pictures of multiple persons to the client software in a batch. Meanwhile, you can also export the person information and pictures and save them in your PC. 9.4.14 Import Person Information You can enter the information of multiple persons in a predefined template (a CSV file) to import the information to the client in a batch. Steps 1. Enter the Person module. 2. Select an added organization in the list, or click Add in the upper-left corner to add an organization and then select it. 3. Click Import to open the Import panel. 4. Select Person Information as the importing mode. 5. Click Download Template for Importing Person to download the template. 6. Enter the person information in the downloaded template. Note If the person has multiple cards, separate the card No. with semicolon. Items with asterisk are required. By default, the Hire Date is the current date. 7. Click 8. Click Import to start importing. to select the CSV file with person information. Note If a person No. already exists in the client's database, delete the existing information before importing. You can import information of no more than 10,000 persons. 142 DS-K1T681 Series Face Recognition Terminal User Manual 9.4.15 Import Person Pictures After importing face pictures for the added persons to the client, the persons in the pictures can be identified by an added face recognition terminal. You can either import person pictures one by one, or import multiple pictures at a time according to your need. Before You Start Be sure to have imported person information to the client beforehand. Steps 1. Enter the Person module. 2. Select an added organization in the list, or click Add in the upper-left corner to add an organization and then select it. 3. Click Import to open the Import panel and check Face. 4. Optional: Enable Verify by Device to check whether face recognition device managed in the client can recognize the face in the photo. 5. Click to select a face picture file. Note The (folder of) face pictures should be in ZIP format. Each picture file should be in JPG format and should be no larger than 200 KB. Each picture file should be named as "Person ID_Name". The Person ID should be the same with that of the imported person information. 6. Click Import to start importing. The importing progress and result will be displayed. 9.4.16 Export Person Information You can export the added persons' information to local PC as a CSV file. Before You Start Make sure you have added persons to an organization. Steps 1. Enter the Person module. 2. Optional: Select an organization in the list. Note All persons' information will be exported if you do not select any organization. 3. Click Export to open the Export panel and check Person Information as the content to export. 4. Check desired items to export. 5. Click Export to save the exported CSV file in your PC. 143 DS-K1T681 Series Face Recognition Terminal User Manual 9.4.17 Export Person Pictures You can export face picture file of the added persons and save in your PC. Before You Start Make sure you have added persons and their face pictures to an organization. Steps 1. Enter the Person module. 2. Optional: Select an organization in the list. Note All persons' face pictures will be exported if you do not select any organization. 3. Click Export to open the Export panel and check Face as the content to export. 4. Click Export to start exporting. Note The exported file is in ZIP format. The exported face picture is named as "Person ID_Name_0" ("0" is for a full-frontal face). 9.4.18 Get Person Information from Access Control Device If the added access control device has been configured with person information (including person details, fingerprint, and issued card information), you can get the person information from the device and import them to the client for further operations. Steps Note If the person name stored in the device is empty, the person name will be filled with the issued card No. after importing to the client. The gender of the persons will be Male by default. If the card number or person ID (employee ID) stored on the device already exists in the client database, the person with this card number or person ID will not be imported to the client. 1. Enter Person module. 2. Select an organization to import the persons. 3. Click Get from Device. 4. Select the access control device from the drop-down list. 5. Click Get to start importing the person information to the client. The person information, including person details, person's fingerprint information (if configured), and the linked cards (if configured), will be imported to the selected organization. 144 DS-K1T681 Series Face Recognition Terminal User Manual 9.4.19 Move Persons to Another Organization You can move the added persons to another organization if you need. Before You Start Make sure you have added at least two organizations. Make sure you have imported person information. Steps 1. Enter Person module. 2. Select an organization in the left panel. The persons under the organization will be displayed in the right panel. 3. Select the person to move. 4. Click Change Organization. 5. Select the organization to move persons to. 6. Click OK. 9.4.20 Issue Cards to Persons in Batch The client provides a convenient way to issue cards to multiple persons in a batch. Steps 1. Enter Person module. 2. Click Batch Issue Cards. All the added persons with no card issued will be displayed in the right panel. 3. Optional: Enter key words (name or person ID) in the input box to filter the person(s) that need issuing cards. 4. Optional: Click Settings to set the card issuing parameters. For details, refer to . 5. Click Initialize to initialize the card enrollment station or card reader to make it ready for issuing cards. 6. Click the Card No. column and enter the card number.
- Place the card on the card enrollment station.
- Swipe the card on the card reader.
- Manually enter the card number and press the Enter key. The person(s) in the list will be issued with card(s). 9.4.21 Report Card Loss If the person lost his/her card, you can report the card loss so that the card's related access authorization will be inactive. Steps 1. Enter Person module. 145 DS-K1T681 Series Face Recognition Terminal User Manual 2. Select the person you want to report card loss for and click Edit to open the Edit Person window. 3. In the Credential Card panel, click on the added card to set this card as lost card. After reporting card loss, the access authorization of this card will be invalid and inactive. Other person who gets this card cannot access the doors by swiping this lost card. 4. Optional: If the lost card is found, you can click to cancel the loss. After cancelling card loss, the access authorization of the person will be valid and active. 5. If the lost card is added in one access group and the access group is applied to the device already, after reporting card loss or cancelling card loss, a window will pop up to notify you to apply the changes to the device. After applying to device, these changes can take effect on the device. 9.4.22 Set Card Issuing Parameters The client provides two modes for reading a card's number: via card enrollment station or via the card reader of the access control device. If a card enrollment station is available, connect it to the PC running the client by USB interface or COM, and place the card on the card enrollment to read the card number. If not, you can also swipe the card on the card reader of the added access control device to get the card number. As a result, before issuing a card to one person, you need to set the card issuing parameters including the issuing mode and related parameters. When adding a card to one person, click Settings to open the Card Issuing Settings window. Local Mode: Issue Card by Card Enrollment Station Connect a card enrollment station to the PC running the client. You can place the card on the card enrollment station to get the card number. Card Enrollment Station Select the model of the connected card enrollment station Note Currently, the supported card enrollment station models include DS-K1F100-D8, DS-K1F100-M, DS-K1F100-D8E, and DS-K1F180-D8E. Card Type This field is only available when the model is DS-K1F100-D8E or DS-K1F180-D8E. Select the card type as EM card or IC card according to the actual card type. Serial Port It is only available when the model is DS-K1F100-M. Select the COM the card enrollment station connects to. Buzzing Enable or disable the buzzing when the card number is read successfully. Card No. Type 146 DS-K1T681 Series Face Recognition Terminal User Manual Select the type of the card number according to actual needs. M1 Card Encryption This field is only available when the model is DS-K1F100-D8, DS-K1F100-D8E, or DS-K1F180-D8E. If the card is M1 card, and if you need to enable the M1 Card Encryption function, you should enable this function and select the sector of the card to encrypt. Remote Mode: Issue Card by Card Reader Select an access control device added in the client and swipe the card on its card reader to read the card number. 9.5 Configure Schedule and Template You can configure the template including holiday and week schedule. After setting the template, you can adopt the configured template to access groups when setting the access groups, so that the access group will take effect in the time durations of the template. Note For access group settings, refer to Set Access Group to Assign Access Authorization to Persons . 9.5.1 Add Holiday You can create holidays and set the days in the holidays, including start date, end date, and holiday duration in one day. Steps Note You can add up to 64 holidays in the software system. 1. Click Access Control Schedule Holiday to enter the Holiday page. 2. Click Add on the left panel. 3. Create a name for the holiday. 4. Optional: Enter the descriptions or some notifications of this holiday in the Remark box. 5. Add a holiday period to the holiday list and configure the holiday duration. Note Up to 16 holiday periods can be added to one holiday. 1) Click Add in the Holiday List field. 2) Drag the cursor to draw the time duration, which means in that duration of time, the configured access group is activated. 147 DS-K1T681 Series Face Recognition Terminal User Manual Note Up to 8 time durations can be set to one holiday period. 3) Optional: Perform the following operations to edit the time durations. Move the cursor to the time duration and drag the time duration on the timeline bar to the desired position when the cursor turns to
. Click the time duration and directly edit the start/end time in the appeared dialog. Move the cursor to the start or the end of time duration and drag to lengthen or shorten the time duration when the cursor turns to
. 4) Optional: Select the time duration(s) that need to be deleted, and then click in the Operation column to delete the selected time duration(s). in the Operation column to clear all the time duration(s) in the time bar. in the Operation column to delete this added holiday period from the 5) Optional: Click 6) Optional: Click holiday list. 6. Click Save. 9.5.2 Add Template Template includes week schedule and holiday. You can set week schedule and assign the time duration of access authorization for different person or group. You can also select the added holiday(s) for the template. Steps Note You can add up to 255 templates in the software system. 1. Click Access Control Schedule Template to enter the Template page. Note There are two default templates: All-Day Authorized and All-Day Denied, and they cannot be edited or deleted. All-Day Authorized The access authorization is valid in each day of the week and it has no holiday. All-Day Denied The access authorization is invalid in each day of the week and it has no holiday. 2. Click Add on the left panel to create a new template. 3. Create a name for the template. 4. Enter the descriptions or some notification of this template in the Remark box. 5. Edit the week schedule to apply it to the template. 1) Click Week Schedule tab on the lower panel. 2) Select a day of the week and draw time duration(s) on the timeline bar. 148 DS-K1T681 Series Face Recognition Terminal User Manual Note Up to 8 time duration(s) can be set for each day in the week schedule. 3) Optional: Perform the following operations to edit the time durations. Move the cursor to the time duration and drag the time duration on the timeline bar to the desired position when the cursor turns to
. Click the time duration and directly edit the start/end time in the appeared dialog. Move the cursor to the start or the end of time duration and drag to lengthen or shorten the time duration when the cursor turns to
. 4) Repeat the two steps above to draw more time durations on the other days of the week. 6. Add a holiday to apply it to the template. Note Up to 4 holidays can be added to one template. 1) Click Holiday tab. 2) Select a holiday in the left list and it will be added to the selected list on the right panel. 3) Optional: Click Add to add a new holiday. Note For details about adding a holiday, refer to Add Holiday . 4) Optional: Select a selected holiday in the right list and click or click Clear to clear all the selected holiday(s) in the right list. 7. Click Save to save the settings and finish adding the template. to remove the selected one, 9.6 Set Access Group to Assign Access Authorization to Persons After adding the person and configuring the person's credentials, you can create the access groups to define which person(s) can get access to which door(s) and then apply the access group to the access control device to take effect. Before You Start Add person to the client. Add access control device to the client and group access points. For details, refer to Group Management . Add template. Steps When the access group settings are changed, you need to apply the access groups to the devices again to take effect. The access group changes include changes of template, access group settings, person's access group settings, and related person details (including card number, fingerprint, face picture, linkage between card number and fingerprint, linkage between card number and fingerprint, card password, card effective period, etc). 149 DS-K1T681 Series Face Recognition Terminal User Manual 1. Click Access Control Authorization Access Group to enter the Access Group interface. 2. Click Add to open the Add window. 3. In the Name text field, create a name for the access group as you want. 4. Select a template for the access group. Note You should configure the template before access group settings. Refer to Configure Schedule and Template for details. 5. In the left list of the Select Person field, select person(s) to assign access authority. 6. In the left list of the Select Access Point field, select door(s), door station(s) or floor(s) for the selected persons to access. 7. Click Save. You can view the selected person(s) and the selected access point(s) on the right side of the interface. 150 DS-K1T681 Series Face Recognition Terminal User Manual Figure 9-9 Display the Selected Person(s) and Access Point(s) 8. After adding the access groups, you need to apply them to the access control device to take effect. 1) Select the access group(s) to apply to the access control device. 2) Click Apply All to Devices start applying all the selected access group(s) to the access control device or door station. 3) Click Apply All to Devices or Apply Changes to Devices. Apply All to Devices This operation will clear all the existed access groups of the selected devices and then apply the new access group to the device. Apply Changes to Devices This operation will not clear the existed access groups of the selected devices and only apply the changed part of the selected access group(s) to the device(s). 4) View the applying status in the Status column or click Applying Status to view all the applied access group(s). Note You can check Display Failure Only to filter the applying results. The selected persons in the applied access groups will have the authorization to enter/exit the selected doors/door stations with their linked card(s) or fingerprints. 9. Optional: Click to edit the access group if necessary. 151 DS-K1T681 Series Face Recognition Terminal User Manual Note If you change the persons' access information or other related information, you will view the promptAccess Group to Be Applied on the right corner of the client. You can click the prompt to apply the changed data to the device. You can select either Apply Now or Apply Later. Figure 9-10 Data Synchronization 9.7 Configure Advanced Functions You can configure the advanced functions of access control to meet some special requirements in different scene. Note For the card related functions(the type of access control card), only the card(s) with access group applied will be listed when adding cards. The advanced functions should be supported by the device. Hover the cursor on the Advanced Function, and then Click function(s) to be displayed. to customize the advanced 9.7.1 Configure Device Parameters After adding the access control device, you can configure the parameters of access control device, access control points. 152 DS-K1T681 Series Face Recognition Terminal User Manual Configure Parameters for Access Control Device After adding the access control device, you can configure its parameters, including overlaying user information on picture, uploading pictures after capturing, saving captured pictures, etc. Steps 1. Click Access Control Advanced Function Device Parameter . Note If you can find Device Parameter in the Advanced Function list, Hover the cursor on the Advanced Function, and then Click to select the Device Parameter to be displayed. 2. Select an access device to show its parameters on the right page. 3. Turn the switch to ON to enable the corresponding functions. Note The displayed parameters may vary for different access control devices. Some of the following parameters are not listed in the Basic Information page, click More to edit the parameters. Voice Prompt If you enable this function, the voice prompt is enabled in the device. You can hear the voice prompt when operating in the device. Upload Pic. After Linked Capture Upload the pictures captured by linked camera to the system automatically. Save Pic. After Linked Capture If you enable this function, you can save the picture captured by linked camera to the device. Face Recognition Mode Normal Mode Recognize face via the camera normally. Deep Mode The device can recognize a much wider people range than the normal mode. This mode is applicable to a more complicated environment. Enable NFC Card If enable the function, the device can recognize the NFC card. You can present NFC card on the device. Enable M1 Card If enable the function, the device can recognize the M1 card. You can present M1 card on the device. Enable EM Card 153 DS-K1T681 Series Face Recognition Terminal User Manual If enable the function, the device can recognize the EM card. You can present EM card on the device. Note If the peripheral card reader supports presenting EM card, the function is also supported to enable/disable the EM card function. 4. Click OK. 5. Optional: Click Copy to, and then select the access control device(s) to copy the parameters in the page to the selected device(s). Configure Parameters for Door/Elevator After adding the access control device, you can configure its access point (door) parameters. Steps 1. Click Access Control Advanced Function Device Parameter . 2. Select an access control device on the left panel, and then click of the selected device. 3. Select a door or floor to show its parameters on the right page. 4. Edit the door or floor parameters. to show the doors or floors Note The displayed parameters may vary for different access control devices. Some of the following parameters are not listed in the Basic Information page, click More to edit the parameters. Name Edit the card reader name as desired. Door Contact You can set the door sensor as remaining closed or remaining open. Usually, it is remaining closed. Exit Button Type You can set the exit button as remaining closed or remaining open. Usually, it is remaining open. Door Locked Time After swiping the normal card and relay action, the timer for locking the door starts working. Extended Open Duration The door contact can be enabled with appropriate delay after person with extended accesss needs swipes her/his card. Door Left Open Timeout Alarm 154 DS-K1T681 Series Face Recognition Terminal User Manual The alarm can be triggered if the door has not been closed in a configured time period. If it is set as 0, no alarm will be triggered. Duress Code The door can open by inputting the duress code when there is duress. At the same time, the client can report the duress event. Super Password The specific person can open the door by inputting the super password. Note The duress code and the super code should be different. The duress code and the super password should be different from the authentication password. The length of duress code and the super password is according the device, usually it should contains 4 to 8 digits. 5. Click OK. 6. Optional: Click Copy to , and then select the door to copy the parameters in the page to the selected doors. Note The door's status duration settings will be copied to the selected door(s) as well. Configure Parameters for Card Reader After adding the access control device, you can configure its card reader parameters. Steps 1. Click Access Control Advanced Function Device Parameter . 2. In the device list on the left, click to expand the door, select a card reader and you can edit the card reader's parameters on the right. 3. Edit the card reader basic parameters in the Basic Information page. Note The displayed parameters may vary for different access control devices. There are part of parameters listed as follows. Refer to the user manual of the device for more details. Some of the following parameters are not listed in the Basic Information page, click Advanced to edit the parameters. Basic Information Name Edit the card reader name as desired. Minimum Card Swiping Interval 155 DS-K1T681 Series Face Recognition Terminal User Manual If the interval between card swiping of the same card is less than the set value, the card swiping is invalid. You can set it as 0 to 255. Alarm of Max. Failed Attempts Enable to report alarm when the card reading attempts reach the set value. Card Reader Type/Card Reader Description Get card reader type and description. They are read-only. Advanced Enable Card Reader Enable the function and e device can be used as an card reader. OK LED Polarity/Error LED Polarity/Buzzer Polarity Set OK LED Polarity/Error LED Polarity/Buzzer LED Polarity of main board according to the card reader parameters. Generally, adopts the default settings. Max. Interval When Entering PWD When you inputting the password on the card reader, if the interval between pressing two digits is larger than the set value, the digits you pressed before will be cleared automatically. Tampering Detection Enable the anti-tamper detection for the card reader. Max. Times of Card Failure Set the max. failure attempts of reading card. Face 1:N Mathcing Threshold Set the matching security level when authenticating via 1:N matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate when authentication. Face Recognition Interval The time interval between two continuous face recognitions when authenticating. By default, it is 2s. Face Anti-spoofing Enable or disable the face anti-spoofing function. If enabling the function, the device can recognize whether the person is a live one or not. Face 1:1 Matching Threshold Set the matching threshold when authenticating via 1:1 matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate when authentication. Application Mode You can select indoor or others application modes according to actual environment. 156 DS-K1T681 Series Face Recognition Terminal User Manual Lock Authentication Failed Face After enabling the Live Face Detection function, the system will lock the user's face for 5 minutes if the live face detection is failed for more than the configured attempts. The same user cannot authenticate via the fake face within 5 minutes. Within the 5 minutes, the user can authenticate via the real face twice continuously to unlock. Liveness Detection Security Level After enabling Live Face Detection function, you can set the matching security level when performing live face authentication. 4. Click OK. 5. Optional: Click Copy to, and then select the card reader(s) to copy the parameters in the page to the selected card reader(s). 9.7.2 Configure Remaining Open/Closed You can set the status of the door as open or closed. For example, you can set the door remaining closed in the holiday, and set the door remaining open in the specified period of the work day. Before You Start Add the access control devices to the system. Steps 1. Click Access Control Advanced Function Remain Open/Closed to enter the Remain Open/
Closed page. 2. Select the door that need to be configured on the left panel. 3. To set the door status during the work day, click the Week Schedule and perform the following operations. 1) Click Remain Open or Remain Closed. 2) Drag the cursor to draw the time duration, which means in that duration of time, the configured access group is activated. Note Up to 8 time durations can be set to each day in the week schedule. 3) Optional: Perform the following operations to edit the time durations. Move the cursor to the time duration and drag the time duration on the timeline bar to the
. desired position when the cursor turns to Click the time duration and directly edit the start/end time in the appeared dialog. Move the cursor to the start or the end of time duration and drag to lengthen or shorten the time duration when the cursor turns to
. 4) Click Save. Related Operations Copy to Whole Week Select one duration on the time bar, click Copy to Whole Week to copy all the duration settings on this time bar to other week days. 157 DS-K1T681 Series Face Recognition Terminal User Manual Delete Selected Select one duration on the time bar, click Delete Selected to delete this duration. Clear Click Clear to clear all the duration settings in the week schedule. 4. To set the door status during the holiday, click the Holiday and perform the following operations. 1) Click Remain Open or Remain Closed. 2) Click Add. 3) Enter the start date and end date. 4) Drag the cursor to draw the time duration, which means in that duration of time, the configured access group is activated. Note Up to 8 time durations can be set to one holiday period. 5) Perform the following operations to edit the time durations. Move the cursor to the time duration and drag the time duration on the timeline bar to the
. desired position when the cursor turns to Click the time duration and directly edit the start/end time in the appeared dialog. Move the cursor to the start or the end of time duration and drag to lengthen or shorten the time duration when the cursor turns to
. 6) Optional: Select the time duration(s) that need to be deleted, and then click in the Operation column to delete the selected time duration(s). 7) Optional: Click 8) Optional: Click holiday list. 9) Click Save. in the Operation column to clear all the time duration(s) in the time bar. in the Operation column to delete this added holiday period from the 5. Optional: Click Copy to to copy the door status settings of this door to other door(s). 9.7.3 Configure Multi-Factor Authentication You can manage the persons by group and set the authentication for multiple persons of one access control point (door). Before You Start Set access group and apply the access group to the access control device. For details, refer to Set Access Group to Assign Access Authorization to Persons . Perform this task when you want to set authentications for multiple cards of one access control point (door). Steps 1. Click Access Control Advanced Function Multi-Factor Auth . 2. Select an access control device in device list on the left panel. 3. Add a person/card group for the access control device. 1) Click Add on the right panel. 2) Create a name for the group as desired. 158 DS-K1T681 Series Face Recognition Terminal User Manual 3) Specify the start time and end time of the effective period for the person/card group. 4) Select members(s) and card(s) in the Available list, and the selected member(s) and card(s) will be added to the Selected list. Note Make sure you have issue card to the person. Make sure you have set access group and apply the access group to the access control device successfully. 5) Click Save. 6) Optional: Select the person/card group(s), and then click Delete to delete it(them). 7) Optional: Select the person/card group(s), and then click Apply to re-apply access group that failed to be applied previously to the access control device. 4. Select an access control point (door) of selected device on the left panel. 5. Enter the maximum interval when entering password. 6. Add an authentication group for the selected access control point. 1) Click Add on the Authentication Groups panel. 2) Select a configured template as the authentication template from the drop-down list. Note For setting the template, refer to Configure Schedule and Template . 3) Select the authentication type as Local Authentication, Local Authentication and Remotely Open Door, or Local Authentication and Super Password from the drop-down list. Local Authentication Authentication by the access control device. Local Authentication and Remotely Open Door Authentication by the access control device and by the client. When the person swipes the card on the device, a window will pop up. You can unlock the door via the client. Figure 9-11 Remotely Open Door 159 DS-K1T681 Series Face Recognition Terminal User Manual Note You can check Offline Authentication to enable the super password authentication when the access control device is disconnected with the client. Local Authentication and Super Password Authentication by the access control device and by the super password. 4) Select the added person/card group in the left list below and it will be added to the Selected list on the right as the authentication group. 5) Click the added authentication group in the right list to set authentication times in the Auth Times column. Note The authentication times should be larger than 0 and smaller than the added personnel quantity in the personnel group. The maximum value of authentication times is 16. 6) Click Save. Note For each access control point (door), up to four authentication groups can be added. For the authentication group of which authentication type is Local Authentication, up to 8 person/card groups can be added to the authentication group. For the authentication group of which authentication type is Local Authentication and Super Password or Local Authentication and Remotely Open Door, up to 7 person/card groups can be added to the authentication group. 7. Click Save. 9.7.4 Configure Card Reader Authentication Mode and Schedule You can set the passing rules for the card reader of the access control device according to your actual needs. Steps 1. Click Access Control Advanced Function Authentication to enter the authentication mode configuration page. 2. Select a card reader on the left to configure. 3. Set card reader authentication mode. 1) Click Configuration. 160 DS-K1T681 Series Face Recognition Terminal User Manual 161 DS-K1T681 Series Face Recognition Terminal User Manual Figure 9-12 Select Card Reader Authentication Mode Note PIN refers to the PIN code set to open the door. Refer to Configure Access Control Information . 2) Check the modes in the Available Mode list and they will be added to the selected modes list. 3) Click OK. After selecting the modes, the selected modes will display as icons with different color. 4. Click the icon to select a card reader authentication mode, and drag the cursor to draw a color bar on the schedule, which means in that period of time, the card reader authentication is valid. 5. Repeat the above step to set other time periods. 162 DS-K1T681 Series Face Recognition Terminal User Manual Figure 9-13 Set Authentication Modes for Card Readers 6. Optional: Select a configured day and click Copy to Week to copy the same settings to the whole week. 7. Optional: Click Copy to to copy the settings to other card readers. 163 DS-K1T681 Series Face Recognition Terminal User Manual 8. Click Save. 9.7.5 Configure First Person In You can set multiple first persons for one access control point. After the first person is authorized, it allows multiple persons access the door or other authentication actions. Before You Start Set the access group and apply the access group to the access control device. For details, refer to Set Access Group to Assign Access Authorization to Persons . Perform this task when you want to configure opening door with first person. Steps 1. Click Access Control Advanced Function First Person In to enter the First Person In page. 2. Select an access control device in the list on the left panel. 3. Select the current mode as Enable Remaining Open after First Person or Disable Remaining Open after First Person from the drop-down list for each access control point of the selected device. Enable Remaining Open after First Person The door remains open for the configured time duration after the first person is authorized until the remain open duration ends. If you select this mode, you should set the remain open duration. Note The remain open duration should be between 0 and 1440 minutes. By default, the remain open duration is 10 minutes. Disable Remaining Open after First Person Disable the function of first person in, namely normal authentication. Note You can authenticate by the first person again to disable the first person mode. 4. Click Add on the First Person List panel. 5. Select person(s) in the left list and the person(s) will be add to the selected persons as the first person(s) of the doors. The added first person(s) will list in the First Person List 6. Optional: Select a first person from the list and click Delete to remove the person from the first person list. 7. Click Save. 164 DS-K1T681 Series Face Recognition Terminal User Manual 9.7.6 Configure Anti-Passback You can set to only pass the access control point according to the specified path and only one person could pass the access control point after swiping the card. Before You Start Enable the anti-passing back function of the access control device. Perform this task when you want to configure the anti-passing back for the access control device. Steps Note Either the anti-passing back or multi-door interlocking function can be configured for an access control device at the same time. For the configuration of multi-door interlocking, refer to Configure Multi-door Interlocking . 1. Click Access Control Advanced Function Anti-Passback to enter the anti-passing back configuration page. 2. Select an access control device in the list. 3. Select a card reader as the beginning of the path in the First Card Reader field. 4. Click the text field of the selected first card reader in the Card Reader Afterward column to open Select Card Reader dialog. 5. Select the afterward card readers for the first card reader. Note Up to four afterward card readers can be added for one card reader. 6. Click OK in the dialog to save the selections. 7. Click Save at the upper-right corner of Anti-Passback page to save the settings and take effect. Note Super credentials, such as super card, super password, super fingerprint, and so on, have the privilege of not following the anti-passback rules. Example Set Card Swiping Path If you select Reader In_01 as the beginning, and select Reader In_02, Reader Out_04 as the linked card readers. Then you can only get through the access control point by swiping the card in the order as Reader In_01, Reader In_02 and Reader Out_04. 165 DS-K1T681 Series Face Recognition Terminal User Manual 9.7.7 Configure Multi-door Interlocking You can set the multi-door interlocking between multiple doors of the same access control device. To open one of the doors, other doors must keep closed. That means in the interlocking combined door group, up to one door can be opened at the same time. Before You Start Add access control device to the client, and make sure the device supports the multi-door interlocking function. Steps Note Multi-door Interlocking function is only supported by the access control device which has more than one access control points (doors). Either the anti-passing back or multi-door interlocking function can be configured for an access control device at the same time. For the configuration of anti-passing back function, refer to Configure Anti-Passback . 1. Click Access Control Advanced Function Multi-door Interlocking . 2. Select an access control device on the left panel. 3. Click Add on the Multi-door Interlocking List panel to open Add Access Control Point to open the Add window. 4. Select at least two access control points(doors) from the list. Note Up to four doors can be added in one multi-door interlocking combination. 5. Click OK to add the selected access control point(s) for interlocking. The configured multi-door interlocking combination will list on the Multi-door Interlocking List panel. 6. Optional: Select an added multi-door interlocking combination from the list and click Delete to delete the combination. 7. Click Apply to apply the settings to the access control device. 9.7.8 Configure Device Parameters After adding the access control device, you can set its parameters such as network parameters. Set Multiple NIC Parameters If the device supports multiple network interfaces, you can set the network parameters of these NICs via the client, such as IP address, MAC address, port number, etc. 166 DS-K1T681 Series Face Recognition Terminal User Manual Before You Start Add access control device to the client, and make sure the device supports multiple NICs. Steps 1. Enter the Access Control module. 2. On the navigation bar on the left, enter Advanced Function More Parameters . 3. Select an access control device in the device list and click NIC to enter Multiple NIC Settings page. 4. Select an NIC you want to configure from the drop-down list. 5. Set its network parameters such as IP address, default gateway, subnet mask, etc. MAC Address A media access control address (MAC address) is a unique identifier assigned to the network interface for communications on the physical network segment. MTU The maximum transmission unit (MTU) of the network interface. 6. Click Save. Set Network Parameters After adding the access control device, you can set the device log uploading mode, and create ISUP account via wired network. Set Log Uploading Mode You can set the mode for the device to upload logs via ISUP protocol. Steps Note Make sure the device is not added by ISUP. 1. Enter the Access Control module. 2. On the navigation bar on the left, enter Advanced Function More Parameters . 3. Select an access control device in the device list and enter Network Uploading Mode . 4. Select the center group from the drop-down list. 5. Check Enable to enable to set the uploading mode. 6. Select the uploading mode from the drop-down list.
- Enable N1 or G1 for the main channel and the backup channel.
- Select Close to disable the main channel or the backup channel 167 DS-K1T681 Series Face Recognition Terminal User Manual Note The main channel and the backup channel cannot enable N1 or G1 at the same time. N1 refers to wired network and G1 refers to GPRS. 7. Click Save. Create ISUP Account in Wired Communication Mode You can set the account for ISUP protocol in wired communication mode. Then you can add devices via ISUP protocol. Steps Note This function should be supported by the device. 1. Enter the Access Control module. 2. On the navigation bar on the left, enter Advanced Function More Parameters . 3. Select an access control device in the device list and enter Network Network Center . 4. Select the center group from the drop-down list. 5. Select the Address Type as IP Address or Domain Name. 6. Enter IP address or domain name according to the address type. 7. Enter the port number for the protocol. Note The port number of the wireless network and wired network should be consistent with the port number of ISUP. 8. Select the Protocol Type as ISUP. 9. Set an account name for the network center. 10. Click Save. Set Device Capture Parameters You can configure the capture parameters of the access control device, including manual capture and event triggered capture. Note The capture function should be supported by the device. Before setting the capture parameters, you should set the picture storage first to define where the event triggered pictures are saved. For details, refer to Set Picture Storage in the user manual of the client software. 168 DS-K1T681 Series Face Recognition Terminal User Manual Set Triggered Capture Parameters When an event occurs, the camera of the access control device can be triggered to capture picture(s) to record what happens when the event occurs. You can view the captured pictures when checking the event details in Event Center. Before that, you need to set the parameters for the capture such as number of pictures captured for one time. Before You Start Before setting the capture parameters, you should set the picture storage first to define where the captured pictures are saved. For details, refer to Set Picture Storage in the user manual of the client software. Steps Note This function should be supported by the device 1. Enter the Access Control module. 2. On the navigation bar on the left, enter Advanced Function More Parameters Capture . 3. Select an access control device in the device list and select Linked Capture. 4. Set the picture size and quality. 5. Set the capture times once triggered which defines how many pictures will be captures for one time. 6. If the capture times is more than 1, set the interval for each capture. 7. Click Save. Set Manual Capture Parameters In Status Monitoring module, you can capture a picture manually the access control device's camera by clicking a button. Before that, you need to set the parameters for the capture such as picture quality. Before You Start Before setting the capture parameters, you should set the saving path first to define where the captured pictures are saved. For details, refer to Set Picture Storage in the user manual of the client software. Steps Note This function should be supported by the device 1. Enter the Access Control module. 2. On the navigation bar on the left, enter Advanced Function More Parameters Capture . 3. Select an access control device in the device list and select Manual Capture. 169 DS-K1T681 Series Face Recognition Terminal User Manual 4. Select the resolution of the captured pictures from the drop-down list. 5. Select the picture quality as High, Medium, or Low. The higher the picture quality is, the larger size the picture will be. 6. Click Save. Set Parameters for Face Recognition Terminal For face recognition terminal, you can set its parameters including face picture database, etc. Steps Note This function should be supported by the device. 1. Enter the Access Control module. 2. On the navigation bar on the left, enter Advanced Function More Parameters . 3. Select an access control device in the device list and click Face Recognition Terminal. 4. Set the parameters. Note These parameters displayed vary according to different device models. Algorithm Select Deep Learning as the face picture database. Save Authenticating Face Picture If enabled, the captured face picture when authenticating will be saved on the device. ECO Mode After enabling the ECO mode, the device can authenticate faces in the low light or dark environment. And you can set he ECO mode threshold, ECO mode (1:N), and ECO mode (1:1). ECO Mode (1:1) Set the matching threshold when authenticating via ECO mode 1:1 matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. ECO Mode (1:N) Set the matching threshold when authenticating via ECO mode 1:N matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. ECO Mode Threshold When enabling the ECO mode, you can set the ECO mode's threshold. The larger the value, the easier the device entering the ECO mode. Available range: 0 to 8. Work Mode Set the device work mode as Access Control Mode. The access control mode is the device normal mode. You should authenticate your credential for accessing. 170 DS-K1T681 Series Face Recognition Terminal User Manual 5. Click Save. Set RS-485 Parameters You can set the access control device's RS-485 parameters including the baud rate, data bit, the stop bit, parity type, flow control type, communication mode, work mode, and connection mode. Before You Start Add access control device to the client, and make sure the device supports RS-485 interface. Steps 1. Enter the Access Control module. 2. On the navigation bar on the left, enter Advanced Function More Parameters . 3. Select an access control device in the device list and click RS-485 to enter the RS-485 Settings page. 4. Select the serial port number from the drop-down list to set the RS-485 parameters. 5. Set the baud rate, data bit, the stop bit, parity type, communication mode, working mode, and connection mode in the drop-down list. Note When the connection mode is Connect Access Control Device, you can select Card No. or Person ID as the output type. 6. Click Save. The configured parameters will be applied to the device automatically. When you change the working mode or connection mode, the device will reboot automatically. Set Wiegand Parameters You can set the access control device's Wiegand channel and the communication mode. After setting the Wiegand parameters, the device can connect to Wiegand card reader via Wiegand communication. Steps Note This function should be supported by the device. 1. Enter the Access Control module. 2. On the navigation bar on the left, enter Advanced Function More Parameters . 3. Select an access control device in the device list and click Wiegand to enter the Wiegand Settings page. 4. Set the switch to on to enable the Wiegand function for the device. 5. Select the Wiegand channel No. and the communication mode from the drop-down list. 171 DS-K1T681 Series Face Recognition Terminal User Manual Note If you set Communication Direction as Sending, you are required to set the Wiegand Mode as Wiegand 26 or Wiegand 34. 6. Check Enable Wiegand to enable the Wiegand function. 7. Click Save. The configured parameters will be applied to the device automatically. After changing the communication direction, the device will reboot automatically. Enable M1 Card Encryption M1 card encryption can improve the security level of authentication. Steps Note The function should be supported by the access control device and the card reader. 1. Enter the Access Control module. 2. On the navigation bar on the left, enter Advanced Function More Parameters . 3. Select an access control device in the device list and click M1 Card Encryption Verification to enter the M1 Card Encryption Verification page. 4. Set the switch to on to enable the M1 card encryption function. 5. Set the sector ID. Note The sector ID ranges from 1 to 100. By default, Sector 13 is encrypted. It is recommended to encrypt sector 13. 6. Click Save to save the settings. 9.8 Configure Linkage Actions for Access Control You can configure different linkage actions for the event detected by the access control device. After that, linkage actions will be triggered once the event happens. This mechanism is used for notifying the security personnel the event, or triggering automatic access control in real time. Two types of linkage actions are supported:
Client Actions: When the event is detected, it will trigger the actions on the client, such as the client making an audible warning.. Device Actions: When the event is detected, it will trigger the actions of a specific device, such as buzzing of a card reader and, opening/closing of a door, .. 172 DS-K1T681 Series Face Recognition Terminal User Manual 9.8.1 Configure Client Actions for Access Event Even if you are far away from an access point, you can still know what happens and how urgent the event is by configuring linked actions of access event on the client. You will be notified on the client once an event is triggered, so that you can response to the event instantly. You can also configure client actions of access points in a batch at a time. Steps Note The linkage actions here refer to the linkage of the client software's own actions such as audible warning, email linkage, etc. 1. Click Event Management Access Control Event . The added access control devices will display in the device list. 2. Select a resource (including device, alarm input, door/elevator, and card reader) from the device list. The event types which the selected resource supports will display. 3. Select the event(s) and click Edit Priority to define the priority for the event(s), which can be used to filter events in the Event Center. 4. Set the linkage actions of the event. 1) Select the event(s) and click Edit Linkage to set the client actions when the events triggered. Audible Warning The client software gives an audible warning when alarm is triggered. You can select the alarm sound for audible warning. Note For setting the alarm sound, please refer to Set Alarm Sound in the user manual of client software.. Send Email Send an email notification of the alarm information to one or more receivers. For details about setting email parameters, refer to Set Email Parameters in the user manual of client software.. 2) Click OK. 5. Enable the event so that when the event is detected, en event will be sent to the client and the linkage actions will be triggered. 6. Optional: Click Copy to... to copy the event settings to other access control device, alarm input, door, or card reader. 173 DS-K1T681 Series Face Recognition Terminal User Manual 9.8.2 Configure Device Actions for Access Event You can set the access control device's linkage actions for the access control device's triggered event. When the event is triggered, it can trigger the alarm output, host buzzer, and other actions on the same device. Steps Note It should be supported by the device. 1. Click Access Control Linkage Configuration . 2. Select the access control device from the list on the left. 3. Click Add button to add a new linkage. 4. Select the event source as Event Linkage. 5. select the event type and detailed event to set the linkage. 6. In the Linkage Target area, set the property target to enable this action. Buzzer on Controller The audible warning of access control device will be triggered. Capture The real-time capture will be triggered. Access Point The door status of open, close, remain open, and remain close will be triggered. Note The target door and the source door cannot be the same one. 7. Click Save. 8. Optional: After adding the device linkage, you can do one or more of the following:
Edit Linkage Settings Select the configured linkage settings in the device list and you can edit its event source parameters, including event source and linkage target. Delete Linkage Settings Select the configured linkage settings in the device list and click Delete to delete it. 9.8.3 Configure Device Actions for Card Swiping You can set the access control device's linkage actions for the specified card swiping. When you swipe the specified card, it can trigger the host buzzer, and other actions on the same device. 174 DS-K1T681 Series Face Recognition Terminal User Manual Steps Note It should be supported by the device. 1. Click Access Control Linkage Configuration . 2. Select the access control device from the list on the left. 3. Click Add button to add a new linkage. 4. Select the event source as Card Linkage. 5. Enter the card number or select the card from the drop-down list. 6. Select the card reader where the card swipes to trigger the linked actions. 7. In the Linkage Target area, set the property target to enable this action. Buzzer on Controller The audible warning of access control device will be triggered. Capture The real-time capture will be triggered. Access Point The door status of open, close, remain open, or remain closed will be triggered. 8. Click Save. When the card (configured in Step 5) swipes on the card reader (configured in Step 6), it can trigger the linked actions (configured in step 7). 9. Optional: After adding the device linkage, you can do one or more of the following:
Delete Linkage Settings Select the configured linkage settings in the device list and click Delete to delete it. Edit Linkage Settings Select the configured linkage settings in the device list and you can edit its event source parameters, including event source and linkage target. 9.8.4 Configure Device Actions for Person ID You can set the access control device's linkage actions for the specified person ID. When access control device detects the specified person ID, it can trigger buzzer on card reader, and other actions. Steps Note It should be supported by the device. 1. Click Access Control Linkage Configuration . 2. Select the access control device from the list on the left. 3. Click Add to add a new linkage. 175 DS-K1T681 Series Face Recognition Terminal User Manual 4. Select Person Linkage as the event source. 5. Enter the employee number or select the person from the drop-down list. 6. Select the card reader where the card swipes. 7. In the Linkage Target area, set the property target to enable this action. Buzzer on Controller The audible warning of access control device will be triggered. Buzzer on Reader The audible warning of card reader will be triggered. Capture An event-related picture will be captured when the selected event happens. Recording An event-related picture will be captured when the selected event happens. Note The device should support recording. Access Point The door status of open, close, remain open, or remain closed will be triggered. 8. Click Save. 9. Optional: After adding the device linkage, you can do one or more of the followings:
Delete Linkage Settings Select the configured linkage settings in the device list and click Delete to delete it. Edit Linkage Settings Select the configured linkage settings in the device list and you can edit its event source parameters, including event source and linkage target. 9.9 Door Control In Monitoring module, you can view the real-time status of the doors managed by the added access control device. You can also control the doors such as open/close the door, or remain the door open/closed via the client remotely. The real-time access event are displayed in this module. You can view the access details and person details. Note For the user with door control permission, the user can enter the Monitoring module and control the door. Or the icons used for control will not show. For setting the user permission, refer to Person Management . 176 DS-K1T681 Series Face Recognition Terminal User Manual 9.9.1 Control Door Status You can control the status for a single door, including opening door, closing door, remaining the door open, and remaining the door closed. Steps 1. Click Monitoring to enter the status monitoring page. 2. Select an access point group on the upper-right corner. Note For managing the access point group, refer to Group Management in the user manual of the client software. The doors in the selected access control group will display. 3. Click a door icon to select a door, or press Ctrl and select multiple doors. 4. Click the following buttons to control the door. Open Door When the door is locked, unlock it and it will be open for once. After the open duration, the door will be closed and locked again automatically. Close Door When the door is unlocked, lock it and it will be closed. The person who has the access authorization can access the door with credentials. Remain Open The door will be unlocked (no matter closed or open). All the persons can access the door with no credentials required. Remain Closed The door will be closed and locked. No person can access the door even if he/she has the authorized credentials, except the super users. Capture Capture a picture manually. Note The Capture button is available when the device supports capture function. The picture is saved in the PC running the client. For setting the saving path, refer to Set File Saving Path in the user manual of the client software. Result The icon of the doors will change in real-time according to the operation if the operation is succeeded. 177 DS-K1T681 Series Face Recognition Terminal User Manual 9.9.2 Check Real-Time Access Records The access records will display in real time, including card swiping records, face recognitions records, fingerprint comparison records, etc. You can view the person information and view the picture captured during access. Steps 1. Click Monitoring and select a group from the drop-down list on the upper-right corner. The access records triggered at the doors in the selected group will display in real time. You can view the details of the records, including card No., person name, organization, event time, etc. 2. Optional: Check the event type and event status so that these events will show in the list if the events are detected. The events of unchecked type or status will not be displayed in the list. 3. Optional: Check Show Latest Event and the latest access record will be selected and displayed at the top of the record list. 4. Optional: Click the event to view the accessed person details, including person pictures
(captured picture and profile), person No., person name, organization, phone, contact address, etc. Note You can double click the captured picture to enlarge it to view the details. 5. Optional: Right click on the column name of the access event table to show or hide the column according to actual needs. 9.10 Event Center The event information (for example, device offline) received by the client displays. In the Event Center, you can check the detailed information of the real-time and historical events, view the event linked video, handle the events, and so on. Before the client can receive the event information from the device, you need to enable the events of the resource and arm the device first. For details, refer to Enable Receiving Event from Devices . Before the you can view the pop-up alarm information, you need to enable event triggered pop-up image in the event center. For details, refer to . 9.10.1 Enable Receiving Event from Devices Before the client software can receive event notifications from the device, you need to arm the device first. Steps 1. Click Tool Device Arming Control to open Device Arming Control page. All the added devices appear on this page. 2. In the Auto-Arming column, turn on the switch to enable auto-arming. 178 DS-K1T681 Series Face Recognition Terminal User Manual After turned on, the device(s) will be armed. And notifications about the events triggered by the armed device(s) will be automatically sent to the client software in real-time. Figure 9-14 Arm Device 9.10.2 View Real-Time Events The real-time event information received by the client of the connected resources are displayed. You can check the real-time event information, including event source, event time, priority, etc. Before You Start Enable receiving events from devices before the client can receive event from the device, see Enable Receiving Event from Devices for details. Steps 1. Click Event Center Real-time Event to enter the real-time event page and you can view the real-time events received by the client. Event Time For encoding device, event time is the client time when it receives the event. For other device types, event time is the time when the event is triggered. Priority Priority represents the emergency degree of the event. 2. Filter the events. Filter by Device Type and (or) Priority Select device type(s) and (or) priorities to filter events. Filter by Keywords Enter the keywords to filter the events. 3. Optional: Right-click the table header of the event list to customize the event related items to be displayed in the event list. 4. Select an event in the event list to view the event details. 179 DS-K1T681 Series Face Recognition Terminal User Manual Note The event details include the captured picture(s), video (recorded video triggered by the event or live view of the device), and other event descriptions. To view the recorded video triggered by the event, you should link camera(s) with the device in event configuration. For details, refer to Event Configuration in the user manual of the client software. To view the captured picture(s), you need to configure picture storage in storage schedule. 5. Optional: Perform the following operations if necessary. Handle Single Event Click Handle to enter the processing suggestion, and then click OK. Note After an event is handled, the Handle button will become Add Remark. Click Add Remark to add more remarks for this handled event. Handle Events in a Batch Select events that need to be processed, and then click Handle in Batch. Enter the processing suggestion, and then click OK. Enable/Disable Alarm Audio Click Audio On/Mute to enable/disable the audio of the event. Select the Latest Event Automatically Check Auto-Select Latest Event to select the latest event automatically and the event information details is displayed. Clear Events Send Email Click Clear to clear the all the events in the event list. Select an event and then click Send Email, and the information details of this event will be sent by email. Note You should configure the email parameters first, see Set Email Parameters in the user manual of the client software for details. Auto-Play Video Check Auto-Play Video to automatically play video when displaying event details. Enlarge Video or Picture Double click the video image to view video in a larger window. Put the cursor on the picture, and click to view picture in a larger window. Download Captured Picture Hover the cursor on the captured picture, and click the download icon on the lower right corner of the picture to download it to the local PC. Download Event Triggered Video Hover the cursor on the recorded video, click video (30s before the event happens) triggered by the event. to download the 180 DS-K1T681 Series Face Recognition Terminal User Manual 9.10.3 Search Historical Events In the Event Search module of the event center page, you can search the historical events via time, device type, and other conditions according to the specified device type, and then process the events. Before You Start Enable receiving events from devices before the client can receive event information from the device,see Enable Receiving Event from Devices for details. Steps 1. Click Event Center Event Search to enter the event search page. 2. Set the filter conditions to display the required events only. Figure 9-15 Search History Event Time The client time when the event starts. Search by Group: Search the events occurred on the resources in the selected group. Device: Search the events occurred on the selected device. Device Type The type of device that occurred the event. All 181 DS-K1T681 Series Face Recognition Terminal User Manual All the device types, and you can set the following filter conditions: group, priority, and status. Video Intercom For the events of video intercom, you need to select searching scope: All Record and Only Unlocking. All Records: You can filter the events from all the video intercom events, and you need to set the following filter conditions: device, priority, status. Only Unlocking: You can filter the events from all the video intercom unlocking events, and you need to set the following filter conditions: device, unlocking type. Access Control For the events of access control, you can set the following filter conditions: device, priority, status, event type, card reader type, person name, card no., organization. Note Click Show More to set the event type, card reader type, person name, card no., organization. Group The group of the device that occurred the event. You should set the group as condition only when you select the Device Type as All. Device The device that occurred the event. Priority The priority including low, medium, high and uncategorized which indicates the urgent degree of the event. Status The handling status of the event. 3. Click Search to search the events according the conditions you set. 4. Optional: Right click the table header of the event list to customize the event related items to be displayed in the event list. 182 DS-K1T681 Series Face Recognition Terminal User Manual Figure 9-16 Customize Event Related Items to be Displayed 5. Optional: Handle the event(s).
- Handle single event: Select one event that need to be processed, and then click Handle in the event information details page, and enter the processing suggestion.
- Handle events in a batch: Select the events which need to be processed, and then click Handle in Batch, and enter the processing suggestion. Note After an event is handled, the Handle button will become Add Remark, click Add Remark to add more remarks for this handled event. 6. Optional: Select an event and then click Send Email, and the information details of this event will be sent by email. Note You should configure the email parameters first, see Set Email Parameters in the user manual of client software for details. 7. Optional: Click Export to export the event log or event pictures to the local PC in CSV format. You can set the saving path manually. 8. Hover the cursor on the related picture, and then click the download icon on the upper-right corner of the picture to download it to the local PC. You can set the saving path manually. 183 DS-K1T681 Series Face Recognition Terminal User Manual 9.11 Time and Attendance The Time and Attendance module provides multiple functionalities to track and monitor when employees start and stop work, and full control of employees working hours such as late arrivals, early departures, time taken on breaks and absenteeism. Note In this section, we introduce the configurations before you can getting the attendance reports. The access records recorded after these configurations will be calculated in the statistics. 9.11.1 Configure Attendance Parameters You can configure the attendance parameters, including the general rule, overtime parameters, attendance check point, holiday, leave type, etc. Set Weekend The days of weekends may vary in different countries and regions. The client provides weekends definition function. You can select one or more days as the weekends according to actual requirements, and set different attendance rules for weekends from workdays. Steps Note The parameters configured here will be set as default for the newly added time period. It will not affect the existed one(s). 1. Enter Time & Attendance module. 2. Click Attendance Settings General Rule . 3. Select the day(s) as weekend, such as Saturday and Sunday. 4. Click Save. Configure Overtime Parameters You can configure the overtime parameters for workday and weekend, including overtime level, work hour rate, attendance status for overtime, etc. Steps 1. Click Time & Attendance Attendance Settings Overtime . 2. Set required information. Overtime Level for Workday 184 DS-K1T681 Series Face Recognition Terminal User Manual When you work for a certain period after end-work time on workday, you will reach different overtime level: overtime level 1, overtime level 2 and overtime level 3. You can set different work hour rate for three overtime levels, respectively. Work Hour Rate Work Hour Rate is used to calculate work hours by multiplying it by overtime. When you work for a certain period after end-work time on workday, you will reach different overtime level. You can set different work hour rates (1-10, can be a decimal) for three overtime levels. For example, your valid overtime is one hour (in overtime level 1), and the work hour rate of overtime level 1 is set as 2, then the work hours in the period will be calculated as 2 hours. Overtime Rule for Weekend You can enable overtime rule for weekend and set calculation mode. 3. Click Save. Configure Attendance Check Point You can set the card reader(s) of the access point as the attendance check point, so that the authentication on the card readers will be recorded for attendance . Before You Start You should add access control device before configuring attendance check point. For details, refer to Add Device . Steps Note By default, all card readers of the added access control devices are set as attendance checkpoint. 1. Enter the Time & Attendance module. 2. Click Attendance Settings Attendance Check Point to enter the Attendance Check Point Settings page. 3. Optional: Set Set All Card Readers as Check Points switch to off. Only the card readers in the list will be set as the attendance check points. 4. Check the desired card reader(s) in the device list as attendance check point(s). 5. Set check point function as Start/End-Work, Start-Work or End-Work. 6. Click Set as Check Point. The configured attendance check point displays on the right list. Configure Holiday You can add the holiday during which the check-in or check-out will not be recorded. 185 DS-K1T681 Series Face Recognition Terminal User Manual Add Regular Holiday You can configure a holiday which will take effect annually on regular days during the effective period, such as New Year's Day, Independence Day, Christmas Day, etc. Steps 1. Enter the Time & Attendance module. 2. Click Attendance Settings Holiday to enter the Holiday Settings page. 3. Check Regular Holiday as holiday type. 4. Custom a name for the holiday. 5. Set the first day of the holiday. 6. Enter the number of the holiday days. 7. Set the attendance status if the employee works on holiday. 8. Optional: Check Repeat Annually to make this holiday setting effective every year. 9. Click OK. The added holiday will display in the holiday list and calendar. If the date is selected as different holidays, it will be recorded as the first-added holiday. 10. Optional: After adding the holiday, perform one of the following operations. Edit Holiday Click to edit the holiday information. Delete Holiday Select one or more added holidays, and click Delete to delete the holiday(s) from the holiday list. Add Irregular Holiday You can configure a holiday which will take effect annually on irregular days during the effective period, such as Bank Holiday. Steps 1. Enter the Time & Attendance module. 2. Click Attendance Settings Holiday to enter the Holiday Settings page. 3. Click Add to open the Add Holiday page. 4. Check Irregular Holiday as holiday type. 5. Custom a name for the holiday. 6. Set the start date of the holiday. Example If you want to set the forth Thursday in November, 2019 as the Thanksgiving Day holiday, you should select 2019, November, 4th, and Thursday from the four drop-down lists. 7. Enter the number of the holiday days. 8. Set the attendance status if the employee works on holiday. 9. Optional: Check Repeat Annually to make this holiday setting effective every year 186 DS-K1T681 Series Face Recognition Terminal User Manual 10. Click OK. The added holiday will display in the holiday list and calendar. If the date is selected as different holidays, it will be recorded as the first-added holiday. 11. Optional: After adding the holiday, perform one of the following operations. Edit Holiday Click to edit the holiday information. Delete Holiday Select one or more added holidays, and click Delete to delete the holiday(s) from the holiday list. Configure Leave Type You can customize the leave type (major leave type and minor leave type) according to actual needs. You can also edit or delete the leave type. Steps 1. Enter the Time & Attendance module. 2. Click Attendance Settings Leave Type to enter the Leave Type Settings page. 3. Click Add on the left to add a major leave type. 4. Optional: Perform one of the following operations for major leave type. Edit Move the cursor over the major leave type and click type. to edit the major leave Delete Select one major leave type and click Delete on the left to delete the major leave type. 5. Click Add on the right to add a minor leave type. 6. Optional: Perform one of the following operations for minor leave type. Edit Move the cursor over the minor leave type and click type. to edit the minor leave Delete Select one or multiple major leave types and click Delete on the right to delete the selected minor leave type(s). Synchronize Authentication Record to Third-Party Database The attendance data recorded in client software can be used by other system for calculation or some other operations. You can enable synchronization function to apply the authentication record from client software to the third-party database automatically. Steps 1. Enter Time & Attendance module. 2. Click Attendance Settings Third-Party Database . 3. Set Apply to Database switch to on to enable synchronization function. 4. Select database Type as SQLServer or MySql. 187 DS-K1T681 Series Face Recognition Terminal User Manual Note If you select MySql, you should import the configuration file (libmysql.dll) from local PC. 5. Set the other required parameters of the third-party database, including server IP address, database name, user name and password. 6. Set table parameters of database according to the actual configuration. 1) Enter the table name of the third-party database. 2) Set the mapped table fields between the client software and the third-party database. 7. Click Save to test whether database can be connected and save the settings for the successful connection. The attendance data will be written to the third-party database. During synchronization, if the client disconnects with the third-party database, the client will start reconnection every 30 mins. After being reconnected, the client will synchronize the data recorded during the disconnected time period to the third-party database. Configure Break Time You can add break time and set start time, end time, duration, calculation mode and other parameters for the break. The added break time can also be edited or deleted. Steps 1. Click Time & Attendance Timetable . The added timetables are displayed in the list. 2. Select an added timetable or click Add to enter setting timetable page. 3. Click Break Time to enter Break Time page. 4. Click Break Time Settings. 5. Add break time. 1) Click Add. 2) Enter a name for the break time. 3) Set related parameters for the break time. Start Time / End Time Set the time when the break starts and ends. No Earlier Than / No Later Than Set the earliest swiping time for starting break and the latest swiping time for ending break. Break Duration The duration from start time to end time of the break. Calculation Auto Deduct The fixed break duration will be excluded from work hours. 188 DS-K1T681 Series Face Recognition Terminal User Manual Must Check The break duration will be calculated and excluded from work hours according to actual check-in and check-out time. Note If you select Must Check as calculation method, you need to set attendance status for late or early returning from break. 6. Click Save to save the settings. 7. Optional: Click Add to continue adding break time. Configure Report Display You can configure display contents displayed in the attendance report, such as the company name, logo, date format, time format, and mark. Steps 1. Enter Time & Attendance module. 2. Click Attendance Statistics Report Display . 3. Set the display settings for attendance report. Company Name Enter a company name to display the name in the report. Attendance Status Mark Enter the mark and select the color. The related fields of attendance status in the report will display with the mark and color. Weekend Mark Enter the mark and select the color. The weekend fields in the report will display with the mark and color. 4. Click Save. 9.11.2 Add General Timetable On the timetable page, you can add general timetable for employees, which requires the fixed start-work time and end-work time. Also, you can set valid check-in/out time, allowable timetable for being late and leaving early. Steps 1. Click Time and Attendance Timetable to enter the timetable settings page. 2. Click Add to enter add timetable page. 189 DS-K1T681 Series Face Recognition Terminal User Manual 190 DS-K1T681 Series Face Recognition Terminal User Manual Figure 9-17 Add Timetable 3. Create a name for the timetable. Note You can click the color icon beside the name to customize the color for the valid timetable on the time bar in the Configuration Result area. 4. Select the timetable type as general. 5. Select calculation method. First In & Last Out 191 DS-K1T681 Series Face Recognition Terminal User Manual The first check-in time is recorded as start work time and the last check-out time is recorded as the end-work time. Each Check-In/Out Each check-in time and check-out time is valid and the sum of all periods between adjacent check-in and check-out time will be recorded as the valid working duration. You need to set Valid Authentication Interval for this calculation method. For example, if the interval between card swiping of the same card is less than the set value, the card swiping is invalid. 6. Optional: Set Enable T&A Status switch to on to calculate according to attendance status of the device. Note This function should be supported by the device. 7. Set the related attendance time parameters as the following:
Start/End-Work Time Set the start-work time and end-work-time. Valid Check-in/out Time On the time bar, adjust the yellow bar to set the timetable during which the check-in or check-out is valid. Calculated as Set the duration calculated as the actual work duration. Late/Early Leave Allowable Set the timetable for late or early leave. 8. Set absence related parameters. Check-In, Late for You can set the late time duration for the employee who has checked in but is late for work. If the employee exceeds the required time period, his/her attendance data will be marked as absent. Check-Out, Early Leave for You can set the early leave time duration for the employee who checks out earlier than the normal leave time, and his/her attendance data will be marked as absent. No Check-in If the employee does not check in, his/her attendance data may be marked as absent or late. No Check-Out If the employee does not check out, his/her attendance data may be marked as absent or early leave. 9. Click Save to add the timetable. 10. Optional: Perform one or more following operations after adding timetable. 192 DS-K1T681 Series Face Recognition Terminal User Manual Edit Timetable Select a timetable from the list to edit related information. Delete Timetable Select a timetable from the list and click Delete to delete it. 9.11.3 Add Shift You can add shift for employees including setting shift period (day, week, month) and the effective attendance time. According to the actual requirements, you can adding multiple timetables in one shift for employees, which requires them to check in and check out for each timetable. Before You Start Add a timetable first. See Add General Timetable for details. Steps 1. Click Time & Attendance Shift to enter shift settings page. 2. Click Add to enter Add Shift page. 3. Enter the name for shift. 4. Select the shift period from the drop-down list. 5. Select the added timetable and click on the time bar to apply the timetable. 193 DS-K1T681 Series Face Recognition Terminal User Manual 194 DS-K1T681 Series Face Recognition Terminal User Manual Figure 9-18 Add Shift Note You can select more than one timetables. The start and end work time and the valid check-in and out time in different time tables can not be overlapped. 195 DS-K1T681 Series Face Recognition Terminal User Manual 196 DS-K1T681 Series Face Recognition Terminal User Manual Figure 9-19 Add Multiple Timetables 6. Click Save. The added shift lists on the left panel of the page. At most 64 shifts can be added. 7. Optional: Assign the shift to organization or person for a quick shift schedule. 1) Click Assign. 2) Select Organization or Person tab and check the desired organization(s) or person(s) box. The selected organizations or persons will list on the right page. 3) Set the Expire Date for the shift schedule. 4) Set other parameters for the schedule. Check-in Not Required Persons in this schedule do not need to check-in when they come to work. Check-out Not Required Persons in this schedule do not need to check-out when they end work. Scheduled on Holidays 197 DS-K1T681 Series Face Recognition Terminal User Manual On the holidays, this schedule is still effective and the persons needs to go to work according to the schedule. Effective for Overtime The persons' overtime will be recorded for this schedule. 5) Click Save to save the quick shift schedule. 9.11.4 Manage Shift Schedule Shift work is an employment practice designed to make use of all 24 hours of the clock each day of the week. The practice typically sees the day divided into shifts, set periods of time during which different shifts perform their duties. You can set department schedule, person schedule, and temporary schedule. Set Department Schedule You can set the shift schedule for one department, and all the persons in the department will be assigned with the shift schedule. Before You Start In Time & Attendance module, the department list is the same with the organization. You should add organization and persons in Person module first. See Person Management for details. Steps 1. Click Time & Attendance Shift Schedule to enter the Shift Schedule Management page. 2. Click Department Schedule to enter Department Schedule page. 3. Select the department from the organization list on the left. Note If Include Sub Organization is checked, when selecting the organization, its sub organizations are selected at the same time. 4. Select the shift from the drop-down list. 5. Optional: Enable Multiple Shift Schedules and select the effective time period(s) from the added timetables for the persons. Note This is only available for shift with only one timetable. Multiple Shift Schedules It contains more than one timetables. The person can check in/out in any of the timetables and the attendance will be effective. 198 DS-K1T681 Series Face Recognition Terminal User Manual If the multiple shift schedules contains three timetables: 00:00 to 07:00, 08:00 to 15:00 and 16:00 to 23:00. The attendance of the person adopting this multiple shift schedules will be effective in any of the three timetables. If the person checks in at 07:50, it will apply the nearest timetable 08:00 to 15:00 to the person's attendance. 6. Set the start date and end date. 7. Set other parameters for the schedule. Check-in Not Required Persons in this schedule do not need to check-in when they come to work. Check-out Not Required Persons in this schedule do not need to check-out when they end work. Scheduled on Holidays On the holidays, this schedule is still effective and the persons needs to go to work according to the schedule. Effective for Overtime The persons' overtime will be recorded for this schedule. 8. Click Save. Set Person Schedule You can assign the shift schedule to one or more persons. You can also view and edit the person schedule details. Before You Start Add department and person in Person module. See Person Management for details. Steps Note The person schedule has the higher priority than department schedule. 1. Click Time & Attendance Shift Schedule to enter the Shift Schedule page. 2. Click Person Schedule to enter Person Schedule page. 3. Select the organization and select the person(s). 4. Select the shift from the drop-down list. 5. Optional: Enable Multiple Shift Schedules and select the effective time period(s) from the added timetables for the persons. Note This is only available for shift with only one timetable. Multiple Shift Schedules 199 DS-K1T681 Series Face Recognition Terminal User Manual It contains more than one timetables. The person can check in/out in any of the timetables and the attendance will be effective. If the multiple shift schedules contains three timetables: 00:00 to 07:00, 08:00 to 15:00 and 16:00 to 23:00. The attendance of the person adopting this multiple shift schedules will be effective in any of the three timetables. If the person checks in at 07:50, it will apply the nearest timetable 08:00 to 15:00 to the person's attendance. 6. Set the start date and end date. 7. Set other parameters for the schedule. Check-in Not Required Persons in this schedule do not need to check-in when they come to work. Check-out Not Required Persons in this schedule do not need to check-out when they end work. Scheduled on Holidays On the holidays, this schedule is still effective and the persons needs to go to work according to the schedule. Effective for Overtime The persons' overtime will be recorded for this schedule. 8. Click Save. Set Temporary Schedule You can add a temporary schedule for the person and the person will be assigned with the shift schedule temporarily. You can also view and edit the temporary schedule details. Before You Start Add department and person in Person module. See Person Management for details. Steps Note The temporary schedule has higher priority than department schedule and person schedule. 1. Click Time & Attendance Shift Schedule to enter the Shift Schedule Management page. 2. Click Temporary Schedule to enter Temporary Schedule page. 3. Select the organization and select the person(s). 4. Click one date or click and drag to select multiple dates for the temporary schedule. 5. Select Workday or Non-Workday from drop-down list. If Non-Workday is selected, you need to set the following parameters. Calculated as Select normal or overtime level to mark the attendance status for temporary schedule. 200 DS-K1T681 Series Face Recognition Terminal User Manual Timetable Select a timetable from drop-down list. Multiple Shift Schedule It contains more than one timetables. The person can check in/out in any of the timetables and the attendance will be effective. If the multiple shift schedules contains three timetables: 00:00 to 07:00, 08:00 to 15:00 and 16:00 to 23:00. The attendance of the person adopting this multiple shift schedules will be effective in any of the three timetables. If the person checks in at 07:50, it will apply the nearest timetable 08:00 to 15:00 to the person's attendance. Rule Set other rule for the schedule, such as Check-in Not Required, andCheck-out Not Required. 6. Click Save. Check Shift Schedule You can check the shift schedule in calendar or list mode. You ca also edit or delete the shift schedule. Steps 1. Click Time & Attendance Shift Schedule to enter the Shift Schedule Management page. 2. Select the organization and corresponding person(s). 3. Click to view the shift schedule in calendar or list mode. or Calendar In calendar mode, you can view the shift schedule for each day in one month. You can click the temporary schedule for one day to edit or delete it. List In list mode, you can view the shift schedule details about one person or organization, such as shift name, type, effective period and so on. Check the shift schedule(s), and click Delete to delete the selected shift schedule(s). 9.11.5 Manually Correct Check-in/out Record If the attendance status is not correct, you can manually correct the check-in or check out record. You can also edit, delete, search, or export the check-in or check-out record. Before You Start You should add organizations and persons in Person module. For details, refer to Person Management . The person's attendance status is incorrect. 201 DS-K1T681 Series Face Recognition Terminal User Manual Steps 1. Click Time & Attendance Attendance Handling to enter attendance handling page. 2. Click Correct Check-In/Out to enter adding the check-in/out correction page. 3. Select person from left list for correction. 4. Select the correction date. 5. Set the check-in/out correction parameters.
- Select Check-in and set the actual start-work time.
- Select Check-out and set the actual end-work time. Note You can click supported. to add multiple check in/out items. At most 8 check-in/out items can be 6. Optional: Enter the remark information as desired. 7. Click Save. 8. Optional: After adding the check-in/out correction, perform one of the following operations. View Click or list mode. or Note to view the added attendance handling information in calendar In calendar mode, you need to click Calculate to get the attendance status of the person in one month. Edit In calendar mode, click the related label on date to edit the details. In list mode, double-click the related filed in Date, Handling Type, Time, or Remark column to edit the information. Delete Delete the selected items. Export Export the attendance handling details to local PC. Note The exported details are saved in CSV format. 9.11.6 Add Leave and Business Trip You can add leave and business trip when the employee want to ask for leave or go on a business trip. Before You Start You should add organizations and persons in the Person module. For details, refer to Person Management . Steps 1. Click Time & Attendance Attendance Handling to enter attendance handling page. 202 DS-K1T681 Series Face Recognition Terminal User Manual 2. Click Apply for Leave/Business Trip to enter adding the leave/business trip page. 3. Select person from left list. 4. Set the date(s) for your leave or business trip. 5. Select the major leave type and minor leave type from the drop-down list. Note You can set the leave type in Attendance Settings. For details, refer to Configure Leave Type . 6. Set the time for leave. 7. Optional: Enter the remark information as desired. 8. Click Save. 9. Optional: After adding the leave and business trip, perform one of the following operations. View Click or list mode. or Note to view the added attendance handling information in calendar In calendar mode, you need to click Calculate to get the attendance status of the person in one month. Edit In calendar mode, click the related label on date to edit the details. In list mode, double-click the filed in Date, Handling Type, Time, or Remark column to edit the related information. Delete Delete the selected items. Export Export the attendance handling details to local PC. Note The exported details are saved in CSV format. 9.11.7 Calculate Attendance Data You need to calculate the attendance data before searching and viewing the overview of the attendance data, employees' detailed attendance data, employees' abnormal attendance data, the employees' overtime working data, and card swiping log. Automatically Calculate Attendance Data You can set a schedule so that the client can automatically calculate attendance data of the previous day at the time you configured every day. 203 DS-K1T681 Series Face Recognition Terminal User Manual Steps Note 1. Enter the Time & Attendance module. 2. Click Attendance Settings General Rule . 3. In the Auto-Calculate Attendance area, set the time that you want the client to calculate the data. 4. Click Save. The client will calculate the attendance data of the previous day from the time you have configured. Manually Calculate Attendance Data You can calculate the attendance data manually by setting the data range. Steps 1. Enter the Time & Attendance module. 2. Click Attendance Statistics Calculation . 3. Set the start time and end time to define the attendance data range. 4. Set other conditions, including department, name, person ID and attendance status. 5. Click Calculate. Note It can only calculate the attendance data within three months. 6. Perform one of the following operations. Correct Check-in/out Click Correct Check-in/out to add check-in/out correction. Select Items to Display Click be displayed in the report.
, or right-click the titles of different items to select items to Generate Report Click Report to generate the attendance report. Export Report Click Export to export attendance data to local PC. Note The exported details are saved in .CSV format. 9.11.8 Attendance Statistics You can check the original attendance record, generate and export the attendance report based on the calculated attendance data. 204 DS-K1T681 Series Face Recognition Terminal User Manual Get an Overview of Employees' Attendance Data You can search and view the employee's attendance records on the client, including attendance time, attendance status, check point, etc. Before You Start You should add organizations and persons in Person module and the persons have swiped cards. For details, refer to Person Management . Calculate the attendance data. Note The client will automatically calculate the previous day's attendance data at 1:00 am on the next day. Keep the client running at 1:00 am or it cannot calculate the previous day's attendance data automatically. If not calculated automatically, you can calculate the attendance data manually. For details, refer to Manually Calculate Attendance Data . Steps 1. Enter the Time & Attendance module. 2. Click Attendance Statistics Attendance Record . 3. Set the attendance start time and end time that you want to search. 4. Set other search conditions, including department, name, and person ID. 5. Select data source as Original Records on Device or Manual Handling Records. 6. Optional: Click Get Events from Device to get the attendance data from the device. 7. Optional: Click Reset to reset all the search conditions and edit the search conditions again. 8. Click Search. The result displays on the page. You can view the employee's required attendance status and check point. 9. Optional: After searching the result, perform one of the following operations. Generate Report Click Report to generate the attendance report. Export Report Click Export to export the results to the local PC. Custom Export Click Custom Report and set conditions to export attendance records according to actual needs. Generate Instant Report It supports to generate the a series of attendance reports manually to view the employees'
attendance results. Before You Start Calculate the attendance data. 205 DS-K1T681 Series Face Recognition Terminal User Manual Note You can calculate the attendance data manually, or set the schedule so that the client can calculate the data automatically every day. For details, refer to Calculate Attendance Data . Steps 1. Enter the Time & Attendance module. 2. Click Attendance Statistics Report . 3. Select a report type. 4. Select the department or person to view the attendance report. 5. Set the start time and end time during which the attendance data will be displayed in the report. 6. Click Report to generate the statistics report and open it. Custom Attendance Report The client supports multiple report types and you can pre-define the report content and it can send the report automatically to the email address you configured. Steps Note Set the email parameters before you want to enable auto-sending email functions. For details, refer to Set Email Parameters in the user manual of the client software. 1. Enter the Time & Attendance module. 2. Click Attendance Statistics Custom Report . 3. Click Add to pre-define a report. 4. Set the report content. Report Name Enter a name for the report. Report Type Select one report type and this report will be generated. Report Time The time to be selected may vary for different report type. Person Select the added person(s) whose attendance records will be generated for the report. 5. Optional: Set the schedule to send the report to the email address(es) automatically. 1) Check the Auto-Sending Email to enable this function. 2) Set the effective period during which the client will send the report on the selected sending date(s). 3) Select the date(s) on which the client will send the report. 4) Set the time at which the client will send the report. 206 DS-K1T681 Series Face Recognition Terminal User Manual Example If you set the effective period as 2018/3/10 to 2018/4/10, select Friday as the sending date, and set the sending time as 20:00:00, the client will send the report at 8 p.m. on Fridays during 2018/3/10 to 2018/4/10. Note Make sure the attendance records are calculated before the sending time. You can calculate the attendance data manually, or set the schedule so that the client can calculate the data automatically every day. For details, refer to Calculate Attendance Data . 5) Enter the receiver email address(es). Note You can click + to add a new email address. Up to 5 email addresses are allowed. 6) Optional: Click Preview to view the email details. 6. Click OK. 7. Optional: After adding the custom report, you can do one or more of the followings:
Edit Report Select one added report and click Edit to edit its settings. Delete Report Select one added report and click Delete to delete it. Generate Report Select one added report and click Report to generate the report instantly and you can view the report details. 207 DS-K1T681 Series Face Recognition Terminal User Manual Appendix A. Tips for Scanning Fingerprint Recommended Finger Forefinger, middle finger or the third finger. Correct Scanning The figure displayed below is the correct way to scan your finger:
You should press your finger on the scanner horizontally. The center of your scanned finger should align with the scanner center. Incorrect Scanning The figures of scanning fingerprint displayed below are incorrect:
208 DS-K1T681 Series Face Recognition Terminal User Manual Environment The scanner should avoid direct sun light, high temperature, humid conditions and rain. When it is dry, the scanner may not recognize your fingerprint successfully. You can blow your finger and scan again. Others If your fingerprint is shallow, or it is hard to scan your fingerprint, we recommend you to use other authentication methods. If you have injuries on the scanned finger, the scanner may not recognize. You can change another finger and try again. 209 DS-K1T681 Series Face Recognition Terminal User Manual Appendix B. Tips When Collecting/Comparing Face Picture The position when collecting or comparing face picture is as below:
Positions (Recommended Distance: 0.5 m) Expression Keep your expression naturally when collecting or comparing face pictures, just like the expression in the picture below. Do not wear hat, sunglasses, or other accessories that can affect the facial recognition function. Do not make your hair cover your eyes, ears, etc. and heavy makeup is not allowed. Posture In order to get a good quality and accurate face picture, position your face looking at the camera when collecting or comparing face pictures. 210 DS-K1T681 Series Face Recognition Terminal User Manual Size Make sure your face is in the middle of the collecting window. 211 DS-K1T681 Series Face Recognition Terminal User Manual Appendix C. Tips for Installation Environment 1. Light Source Illumination Reference Value Candle: 10Lux Bulb: 100~850Lux Sunlight: More than 1200Lux 2. Avoid backlight, direct and indirect sunlight 212 DS-K1T681 Series Face Recognition Terminal User Manual Appendix D. Dimension Figure D-1 Dimension 213 DS-K1T681 Series Face Recognition Terminal User Manual Figure D-2 Dimension with Bracket 214 DS-K1T681 Series Face Recognition Terminal User Manual Appendix E . Communication Matrix and Device Command Communication Matrix Scan the following QR code to get the device communication matrix. Note that the matrix contains all communication ports of Hikvision access control and video intercom devices. Figure F-1 QR Code of Communication Matrix Device Command Scan the following QR code to get the device common serial port commands. Note that the command list contains all commonly used serial ports commands for all Hikvision access control and video intercom devices. Figure F-2 Device Command 215 UD29945B
1 2 3 | Label | ID Label/Location Info | 235.00 KiB | September 13 2022 |
HIIK VISION Face Recognition Terminal Model: DS-K1T681DBX WP: 12V-24V === 1.5A SN: AB1234567 UUVAIOTAAMMT NT o==
Made in China FCC ID:2ADTD-K1T681DBX This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)this device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause undesired operation. Manufacturer: Hangzhou Hikvision Digital Technology Co.,Ltd. ;
Address: No.555 Qianmo Road, Binjiang District,Hangzhou 310052, China wa o Br
1 2 3 | Applicant Declaration Letter | Cover Letter(s) | 217.28 KiB | September 13 2022 |
SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name Hangzhou Hikvision Digital Technology Co., Ltd. Address Grantee Code FCC ID No. 555 Qianmo Road, Binjiang District, Hangzhou 310052, China 2ADTD 2ADTD-K1T681DBX Authorized Contact Name Long Cheng Contact Email Contact Phone chenglong6@hikvision.com
+8618969187825 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;
a) b) c) d) e) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:
labeling the equipment with the exact FCC ID as specified in this application,
(1)
(2) compliance statement labeling pursuant to the applicable rules,
(3) compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.
(1)
(2)
(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Date: 2022-09-05 Applicant Signature:
Print Name:
Title:
*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Long Cheng Testing & Certification Engineer Applicant Declaration Rev:0.0
1 2 3 | Auth letter | Cover Letter(s) | 116.17 KiB | September 13 2022 |
Hangzhou Hikvision Digital Technology Co., Ltd. TO:
Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2ADTD-K1T681DBX To whom it may concern:
Date: 2022-09-05 We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Hangzhou Hikvision Digital Technology Co., Ltd. This authorization is valid until further written notice from the applicant. Name (Printed): Long Cheng Title: Testing & Certification Engineer Signature:
On behalf of Company: Hangzhou Hikvision Digital Technology Co., Ltd. Telephone: +8618969187825
1 2 3 | Confidentiality FCC | Cover Letter(s) | 139.74 KiB | September 13 2022 |
Hangzhou Hikvision Digital Technology Co., Ltd. To:
SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Hangzhou Hikvision Digital Technology Co., Ltd. No. 555 Qianmo Road, Binjiang District, Hangzhou 310052, China Regarding:
Confidentiality Request regarding application for FCC ID: 2ADTD-K1T681DBX LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature:
Printed Name (on file with the FCC associated with the Grantee Code): Long Cheng Title: Testing & Certification Engineer Company Name: Hangzhou Hikvision Digital Technology Co., Ltd.
1 2 3 | Declaration Letter for Function Limited Use | Attestation Statements | 162.76 KiB | September 13 2022 |
Hangzhou Hikvision Digital Technology Co., Ltd. Date: 2022-09-08 Declaration Letter about Limited Use To whom it may concern, WE (Hangzhou Hikvision Digital Technology Co., Ltd.) HEREBY DECLARED THAT Our product Product Description:
Face Recognition Terminal Model No:
FCC ID:
DS-K1T681DBX 2ADTD-K1T681DBX The 2.4G Wi-Fi function integrated in RF module RTL8723DU in this device has been disabled by software. Any modification will be highlighted on the release letter, and the impact analysis will also have a review. Verification procedure and verification results will be performed based on the release letter and impact analysis report. Name (Printed): Long Cheng Signature:
Title:
Testing & Certification Engineer On behalf of Company: Hangzhou Hikvision Digital Technology Co., Ltd. Telephone: +8618969187825
1 2 3 | MCL | Cover Letter(s) | 128.37 KiB | September 13 2022 |
Hangzhou Hikvision Digital Technology Co., Ltd. Current Date: 2022-09-05 To:
SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. No. 588 West Jindu Road, Songjiang District, Shanghai, China. 201612 Dear Sir/Madam, Subject: Declaration Letter about Identity of Products
*WE (Hangzhou Hikvision Digital Technology Co., Ltd.) HEREBY DECLARED THAT Product Description Face Recognition Terminal Model No. DS-K1T681DBUHK,DS-K1T681DBCKV,DS-K1T681DBUVS, Manufacturers Name Hangzhou Hikvision Digital Technology Co., Ltd. DS-K1T681DBKVO,DS-K1T681DBHUN Manufacturers Address No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
*Except that the model number and silk deviation, are identical with the original product as follows:
Note: The definition of identical should be electrically identical. A device will be considered to be electrically identical if no changes are made to the devices schematics, board layouts, component layouts, chip sets, resistors and all other electrical aspects of the device are identical with the model(s) below which sample(s) we chose to be tested by SGS:
Model No. ():
DS-K1T681DBX Manufacturers Name (): Hangzhou Hikvision Digital Technology Co., Ltd. Manufacturers Address ):
No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Sincerely, Signature ():
Printed Name ():
Long Cheng Position/Title ():
Testing & Certification Engineer Contact Number ():
+8618969187825
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2022-09-13 | 13.56 ~ 13.56 | DXX - Part 15 Low Power Communication Device Transmitter | Original Equipment |
2 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
3 | 2402 ~ 2480 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 | Effective |
2022-09-13
|
||||
1 2 3 | Applicant's complete, legal business name |
Hangzhou Hikvision Digital Technology Co., Ltd.
|
||||
1 2 3 | FCC Registration Number (FRN) |
0024149825
|
||||
1 2 3 | Physical Address |
No. 555 Qianmo Road, Binjiang District
|
||||
1 2 3 |
Hangzhou, N/A
|
|||||
1 2 3 |
China
|
|||||
app s | TCB Information | |||||
1 2 3 | TCB Application Email Address |
U******@SGS.COM
|
||||
1 2 3 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
1 2 3 |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|||||
app s | FCC ID | |||||
1 2 3 | Grantee Code |
2ADTD
|
||||
1 2 3 | Equipment Product Code |
K1T681DBX
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 | Name |
L******** C********
|
||||
1 2 3 | Telephone Number |
+8618********
|
||||
1 2 3 | Fax Number |
+86-5********
|
||||
1 2 3 |
c******@hikvision.com
|
|||||
app s | Technical Contact | |||||
1 2 3 | Firm Name |
SGS-CSTC Standards Technical Services Co., Ltd.
|
||||
1 2 3 | Name |
P******** Z****
|
||||
1 2 3 | Physical Address |
588 West Jindu Road, Xinqiao, Songjiang
|
||||
1 2 3 |
ShangHai, 201612
|
|||||
1 2 3 |
China
|
|||||
1 2 3 | Telephone Number |
+8621********
|
||||
1 2 3 | Fax Number |
02161********
|
||||
1 2 3 |
P******@sgs.com
|
|||||
app s | Non Technical Contact | |||||
1 2 3 | Firm Name |
SGS-CSTC Standards Technical Services Co., Ltd.
|
||||
1 2 3 | Name |
P****** Z******
|
||||
1 2 3 | Physical Address |
588 West Jindu Road, Xinqiao, Songjiang
|
||||
1 2 3 |
ShangHai, 201612
|
|||||
1 2 3 |
China
|
|||||
1 2 3 | Telephone Number |
+8621********
|
||||
1 2 3 | Fax Number |
02161********
|
||||
1 2 3 |
P******@sgs.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 2 3 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 | Equipment Class | DXX - Part 15 Low Power Communication Device Transmitter | ||||
1 2 3 | DSS - Part 15 Spread Spectrum Transmitter | |||||
1 2 3 | DTS - Digital Transmission System | |||||
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Face Recognition Terminal | ||||
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 | Modular Equipment Type | Does not apply | ||||
1 2 3 | Purpose / Application is for | Original Equipment | ||||
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 | Grant Comments | Power Output listed is conducted. | ||||
1 2 3 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 | Firm Name |
Compliance Certification Services (Kunshan) Inc.
|
||||
1 2 3 | Name |
J**** C********
|
||||
1 2 3 | Telephone Number |
+ 86-******** Extension:
|
||||
1 2 3 |
J******@sgs.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 13.56000000 | 13.56000000 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0020000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0020000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC