FCC ID: 2ADTD-KH6320WTDE1 IP Video Intercom Indoor Station

Video Intercom Bundle Video Intercom Bundle Legal Information 2022 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website ( https://

www.hikvision.com/ ). Please use this Manual with the guidance and assistance of professionals trained in supporting the Product. Trademarks Hikvision in various jurisdictions. Other trademarks and logos mentioned are the properties of their respective owners. and other Hikvision's trademarks and logos are the properties of Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED "AS IS" AND "WITH ALL FAULTS AND ERRORS". HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE i Video Intercom Bundle DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATTER PREVAILS. Data Protection During the use of device, personal data will be collected, stored and processed. To protect data, the development of Hikvision devices incorporates privacy by design principles. For example, for device with facial recognition features, biometrics data is stored in your device with encryption method; for fingerprint device, only fingerprint template will be saved, which is impossible to reconstruct a fingerprint image. As data controller, you are advised to collect, store, process and transfer data in accordance with the applicable data protection laws and regulations, including without limitation, conducting security controls to safeguard personal data, such as, implementing reasonable administrative and physical security controls, conduct periodic reviews and assessments of the effectiveness of your security controls. ii Video Intercom Bundle Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Danger Caution Note Indicates a hazardous situation which, if not avoided, will or could result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results. Provides additional information to emphasize or supplement important points of the main text. iii Video Intercom Bundle Safety Instruction All the electronic operation should be strictly compliance with the electrical safety regulations, fire prevention regulations and other related regulations in your local region. Please use the power adapter, which is provided by normal company. The power consumption cannot be less than the required value. Do not connect several devices to one power adapter as adapter overload may cause over-heat Please make sure that the power has been disconnected before you wire, install or dismantle the When the product is installed on wall or ceiling, the device shall be firmly fixed. If smoke, odors or noise rise from the device, turn off the power at once and unplug the power cable, and then please contact the service center. If the product does not work properly, please contact your dealer or the nearest service center. Never attempt to disassemble the device yourself. (We shall not assume any responsibility for problems caused by unauthorized repair or maintenance.) Warning or fire hazard. device. Caution Do not drop the device or subject it to physical shock, and do not expose it to high electromagnetism radiation. Avoid the equipment installation on vibrations surface or places subject to shock (ignorance can cause equipment damage). Do not place the device in extremely hot (refer to the specification of the device for the detailed operating temperature), cold, dusty or damp locations, and do not expose it to high electromagnetic radiation. The device cover for indoor use shall be kept from rain and moisture. Exposing the equipment to direct sun light, low ventilation or heat source such as heater or radiator is forbidden (ignorance can cause fire danger). Do not aim the device at the sun or extra bright places. A blooming or smear may occur otherwise (which is not a malfunction however), and affecting the endurance of sensor at the same time. Please use the provided glove when open up the device cover, avoid direct contact with the device cover, because the acidic sweat of the fingers may erode the surface coating of the device cover. Please use a soft and dry cloth when clean inside and outside surfaces of the device cover, do not use alkaline detergents. Please keep all wrappers after unpack them for future use. In case of any failure occurred, you need to return the device to the factory with the original wrapper. Transportation without the original wrapper may result in damage on the device and lead to additional costs. iv Video Intercom Bundle Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or equivalent type only. Dispose of used batteries according to the instructions provided by the battery manufacturer. Input voltage should meet both the SELV and the Limited Power Source according to 60950-1 standard. The power supply must conform to LPS. The recommended adaptor models and manufacturers are shown as below. Use the attached adapter, and do not change the adaptor randomly. Model Manufacturer Standard ADS-24S-12 1224GPCN G0549-240-050 TS-A018-120015Ec SHENZHEN HONOR ELECTRONIC CO.,LTD SHENZHEN GOSPELL DIGITAL TECHNOLOGY CO.,LTD SHENZHEN TRANSIN TECHNOLOGIES CO., LTD CEE CEE CEE v Video Intercom Bundle Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body. FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE"

and comply therefore with the applicable harmonized European standards listed vi Video Intercom Bundle under the EMC Directive 2014/30/EU, RE Directive 2014/53/EU,the RoHS Directive 2011/65/EU 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see:

www.recyclethis.info 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury

(Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see:www.recyclethis.info Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause interference, and 2. this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorise aux deux conditions suivantes :

1. l'appareil ne doit pas produire de brouillage, et 2. l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformment la rglementation d'Industrie Canada, le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body. vii Video Intercom Bundle Cet quipement doit tre install et utilis une distance minimale de 20 cm entre le radiateur et votre corps. viii Video Intercom Bundle Contents Chapter 1 About this Manual ...................................................................................................... 1 Chapter 2 Introduction ............................................................................................................... 2 Chapter 3 Appearance ................................................................................................................ 3 Chapter 4 Terminal and Wiring Description ................................................................................. 6 4.1 Terminal Description .............................................................................................................. 6 4.2 Wiring Description ................................................................................................................. 9 Chapter 5 Installation ............................................................................................................... 10 5.1 Install Indoor Station ............................................................................................................ 10 5.1.1 Wall Mounting with Junction Box ............................................................................... 10 5.1.2 Mounting Indoor Station without Junction Box .......................................................... 12 5.2 Install Doorbell ..................................................................................................................... 13 Chapter 6 Activation ................................................................................................................. 18 6.1 Connect to Wired Network .................................................................................................. 18 6.2 Activate Indoor Station ........................................................................................................ 18 6.3 Activate Device via Client Software ...................................................................................... 19 6.4 Basic Operation .................................................................................................................... 20 6.4.1 Set Linked Device IP .................................................................................................... 20 6.4.2 Call Settings ................................................................................................................. 21 6.4.3 Live View ..................................................................................................................... 25 Chapter 7 Door Station Configuration via Client Software ......................................................... 27 7.1 Device Management ............................................................................................................ 27 7.1.1 Add Online Device ....................................................................................................... 27 7.1.2 Add Device by IP Address ............................................................................................ 29 7.1.3 Add Device by IP Segment .......................................................................................... 29 7.2 Live View via Door Station ................................................................................................... 29 7.3 Organization Management .................................................................................................. 29 ix Video Intercom Bundle 7.3.1 Add Organization ........................................................................................................ 29 7.3.2 Modify and Delete Organization ................................................................................. 30 7.4 Person Management ............................................................................................................ 30 7.4.1 Add Person .................................................................................................................. 30 7.4.2 Modify and Delete Person .......................................................................................... 31 7.4.3 Change Person to Other Organization ........................................................................ 31 7.4.4 Import and Export Person Information ....................................................................... 32 7.4.5 Get Person Information from Device .......................................................................... 32 7.4.6 Issue Card in Batch ...................................................................................................... 33 7.4.7 Permission Settings ..................................................................................................... 36 7.5 Video Intercom Settings ....................................................................................................... 36 7.5.1 Receive Call from Door Station ................................................................................... 37 7.5.2 Release Notice ............................................................................................................ 37 7.5.3 Search Video Intercom Information ............................................................................ 38 7.5.4 Upload Armed Information ......................................................................................... 39 Appendix A. Communication Matrix and Device Command ...................................................... 40 x Video Intercom Bundle Chapter 1 About this Manual Get the manual and related software from or the official website (http://www.hikvision.com). Product Model Network Indoor Station Doorphone DS-KH6320-WTDE1 DS-KB2411T-IM 1 Video Intercom Bundle Chapter 2 Introduction Features of the hybrid video intercom products:

User-friendly control with a convenient touch screen. Convenient management via the Hik-Connect mobile client. More cost-effective options with analog doorbells. Easy installation as the doorbell requires no exclusive power supply. 2 Video Intercom Bundle Chapter 3 Appearance Network Indoor Station Figure 3-1 Appearance of Indoor Station No. Description Table 3-1 Description 1 2 3 4 5 6 Screen Microphone SD Card Slot Four-Wire Terminals Network Interface Power Supply Interface 3 Video Intercom Bundle Doorphone 1 2 3 4 5 6 Figure 3-2 Appearance of Doorphone Table 3-2 Description No. Description Microphone Built-in Camera IR Supplement Light Photoresistor Call Button Loud Speaker 4 Video Intercom Bundle No. Description 7 8 Four-Wire Interface Lock Interface 5 Video Intercom Bundle Chapter 4 Terminal and Wiring Description 4.1 Terminal Description Network Indoor Station Wiring Figure 4-1 Terminal of Indoor Station Table 4-1 Descriptions of Terminal and Interfaces Interface Description Function For the access of doorphone 1 B1+

V1 A1 G 12 VDC Power supply for doorphone 1 Video input Audio input/

output Grounding 6 Video Intercom Bundle Interface Description Function Power supply for doorphone 2 For the access of doorphone 2 B2+

V2 A2 G Video data interface for doorphone 2 Audio data interface for doorphone 2 Grounding 7 Video Intercom Bundle Doorphone Wiring Figure 4-2 Terminal of Doorphone Table 4-2 Descriptions of Terminal and Interfaces Interface Description Function For the access of indoor station B+

V A Power supply from indoor station Video output Audio input/

output 8 Interface Description Function Video Intercom Bundle Connect to door lock G NC COM NO Grounding Door lock relay output/normally closed Door lock relay output/common Door lock relay output/normally open 4.2 Wiring Description The Typical application is shown as below. Caution Typical Application Make sure all the related equipment is power-off during the wiring and installation. Figure 4-3 Topology Note Network indoor station can be connected to LAN(PoE) with Network Cable. 9 Video Intercom Bundle Chapter 5 Installation 5.1 Install Indoor Station 5.1.1 Wall Mounting with Junction Box Before You Start Note Make sure the device in the package is in good condition and all the assembly parts are included. The power supply the indoor station supports is 12 VDC. Please make sure your power supply matches your indoor station. Make sure all the related equipment is power-off during the installation. Check the product specification for the installation environment. The dimension of junction box should be 75 mm (width) 75mm (length) 50mm (depth). The dimension of wall mounting plate is shown. 10 Video Intercom Bundle Figure 5-1 Wall Mounting Plate Steps 1. Chisel a hole in the wall. The size of the hole should be 76 mm (width) 76 mm (length) 50 mm (depth). 2. Insert the junction box to the hole chiseled on the wall. 3. Fix the wall mounting plate to the junction box with 2 screws. 4. Hook the indoor station to the wall mounting plate tightly by inserting the plate hooks into the slots on the rear panel of the indoor station, during which the lock catch will be locked automatically. 11 Video Intercom Bundle Figure 5-2 Wall Mounting with Junction Box 5.1.2 Mounting Indoor Station without Junction Box Before You Start Note Make sure the device in the package is in good condition and all the assembly parts are included. The power supply the indoor station supports is 12 VDC. Please make sure your power supply matches your indoor station. Make sure all the related equipment is power-off during the installation. Check the product specification for the installation environment. Steps 1. Insert 2 expension tubes into the wall. 2. Fix the wall mounting plate to the junction box with 2 screws. 3. Hook the indoor station to the wall mounting plate tightly by inserting the plate hooks into the slots on the rear panel of the indoor station, during which the lock catch will be locked automatically. 12 Video Intercom Bundle Figure 5-3 Wall Mounting without Junction Box 5.2 Install Doorbell Before You Start Make sure you have powered off the main power switch of your home. Make sure you have connected power cables of the doorbell. The Dimension of the wall mounting shield is shown below. 13 Video Intercom Bundle Figure 5-4 Wall Mounting Shield Steps 1. Fix the wall mounting shield to the wall with 3 screws. 14 Video Intercom Bundle Figure 5-5 Fix Shield to Wall 2. Hook the door station to the shield tightly by inserting the hooks of shield panel into the slots on the rear panel of the door station. 15 Video Intercom Bundle 3. Secure the door station with the mounting shield with the set screw. Figure 5-6 Install Doorphone to Shield 16 Video Intercom Bundle Figure 5-7 Fix Doorbell 17 Video Intercom Bundle Chapter 6 Activation 6.1 Connect to Wired Network You can connect the device to the network via connecting network cables. Steps 1. Use the network cable to connect your computer to distributor. 2. Enter the default IP address of the device in the address bar of web browser. What to do next Activate the device and login to configure parameters remotely. 6.2 Activate Indoor Station You can configure and operate the indoor station after creating a password for the device activation. Steps 1. Power on the device. It will enter the activation page. 2. Create a password and confirm it. Figure 6-1 Activation Page 18 Video Intercom Bundle to enable or disable password reveal. 3. Tap OK to activate the indoor station. Note You can click Note We highly recommend you to create a strong password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product. 6.3 Activate Device via Client Software You can only configure and operate the door station after creating a password for the device activation. Steps 1. Run the client software, click Maintenance and Management Device Management Device Default parameters of door station are as follows:

Default IP Address: 192.0.0.65. Default Port No.: 8000. Default User Name: admin. to enter the page. 2. Click Online Device. 3. Select an inactivated device and click Activate. 4. Create a password, and confirm the password. Note We highly recommend you to create a strong password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product. 5. Click OK to activate the device. Note be performed. When the device is not activated, the basic operation and remote operation of device cannot You can hold the Ctrl or Shift key to select multiple devices in the online devices, and click the Activate button to activate devices in batch. 19 Video Intercom Bundle 6.4 Basic Operation 6.4.1 Set Linked Device IP Linked network parameters refers to the network parameters of devices (like door station, doorphone, main station, center, etc.), to which the indoor station is linked. Linked devices for the indoor station refers to door station, center, main station, and doorphone. With the private SIP protocol, intercom can be realized only when all these devices are in the same network segment with the indoor station. With the standard SIP protocol, intercom can be realized when all these devices support the standard SIP protocol. Steps Note The doorphone does not support adding with the standard SIP protocol. Here take door station network settings as example. Configuration , and enter admin (activation) password. to enter the device management page. 1. Tap Settings 2. Tap 3. Tap Indoor Extension and select a connect indoor extension. 4. Tap Main Door Station to pop up the device information dialog. Figure 6-2 Device Information 20 Video Intercom Bundle Restore the door station via indoor station. Tap to restore the parameters of the door station. Modify the IP address of the linked door station. Tap to edit the IP address of door station. 5. Select the device to link. Edit the network parameters. 6. Set the IP address for SIP Server, Platform IP, Main Station and Main Doorphone. 6.4.2 Call Settings Add Contact Before You Start Wake up the device. Refers to for details. Steps 1. On the main page of the device, tap Contact List to enter the contact list page. 2. Tap + to pop up the contact adding dialog. Figure 6-3 Contact List 21 Video Intercom Bundle 3. Enter the contact name and room No. Figure 6-4 Add Contact If you enable the VoIP account functions, you should enter the contact name and the phone number of VOIP account for the standard SIP protocol. 4. Tap OK to save the settings. Note Note Up to 200 contacts can be added. Call Resident Before You Start Wake up the device. Refers to for details. Steps 1. On the main page of the device, tap Call to enter the residents calling page. 22 Video Intercom Bundle

Note Figure 6-5 Call Resident 2. Enter the calling number to call. If you want to call room, the calling number format should be x-x-x-xxx. For example, the calling number of Community 1, Building 2, Unit 3, and Room 405 is 1-2-3-405. Tap the call button to start an audiovisual call. The community No. can be omitted. If you want to call VoIP contact, the calling number should be the phone number of VoIP account. Call Indoor Extension/Indoor Station If you install indoor station and indoor extensions at home, you can call the indoor extension via your indoor station, and vice versa. If you have installed more than 2 indoor extensions, you can also call the indoor extension from the indoor extension. Call Indoor Extension from Indoor Station Enter 0-indoor extension No. on the indoor station to start calling the target indoor extension. Call Indoor Station from Indoor Extension Enter 0-0 on the indoor extension to call the indoor station from the indoor extension. 23 Video Intercom Bundle Call Indoor Extension from Indoor Extension Enter 0-indoor extension No. on the indoor extension to start calling the target indoor extension. Receive Call The indoor station and indoor extension can receive calls from the door station, the main station or iVMS-4200 Client. On the call from door station interface, there are 2 unlock buttons: Unlock 1, and Unlock 2. When you tap Unlock 1, the building gate will open by default, and when you tap Unlock 2, the door connected to the door station with the secure control door unit will open. Tap the capture button to capture the live view picture when speaking with the door station. And prompts "Captured" will display on the screen. Indoor extension can receive calls from the door station and the main station only. View Call Logs Before You Start Wake up the device. Refers to for details. Steps 1. On the main page of the device, tap Call Log to enter the call log page. Figure 6-6 Call Logs 24 Video Intercom Bundle 2. Tap a piece of call logs in the list to call back. Note Indoor extension does not support this function. The indoor station saves call logs from door station, outer door station, management center and other indoor stations. Hold a piece of call logs, and tap Delete Logs to delete. Tap Clear to delete all pieces of call logs. On the live view page, you can view the live video of added door station and network camera. 6.4.3 Live View Steps Note Make sure the network camera or door station is well-connected. Make sure the indoor extension and the indoor station are well-connected. 1. Tap Live View to enter the live view page. 2. Tap to enter the live view page of door station. Figure 6-7 Live View 25 Video Intercom Bundle Note On the Call from Door Station page, there are 2 unlock buttons: Unlock 1, and Unlock 2. When you tap Unlock 1, the building gate will open by default. When you tap Unlock 2, the door station connected door will open. On the Call from Door Station page, there are 1 capture button. You can tap the button to capture the picture via door station. On the Call from Bell or Call from Analog Doorphone page, there 1 unlock button and 1 capture button. You can tap the buttons to unlock the connected door or capture pictures. 3. Tap to enter the live view page of network cameras. 26 Video Intercom Bundle Chapter 7 Door Station Configuration via Client Software 7.1 Device Management Device management includes device activation, adding device, editing device, and deleting device, and so on. After running the iVMS-4200, video intercom devices should be added to the client software for remote configuration and management. 7.1.1 Add Online Device Before You Start Make sure the device to be added is in the same subnet with your computer. Otherwise, please edit network parameters first. Steps 1. Click Online Device to select an active online device. 2. Click Add. 3. Enter corresponding information, and click Add. 27 Video Intercom Bundle Figure 7-1 Add to the Client 28 Video Intercom Bundle 7.1.2 Add Device by IP Address Steps 1. Click +Add to pop up the adding devices dialog box. 2. Select IP/Domain as Adding Mode. 3. Enter corresponding information. 4. Click Add. 7.1.3 Add Device by IP Segment Steps 1. Click +Add to pop up the dialog box. 2. Select IP Segment as Adding Mode. 3. Enter corresponding information, and click Add. 7.2 Live View via Door Station You can add many devices at once whose IP addresses are among the IP segment. Steps 1. On the main page of the client software, click Main View to enter the Live View page. 2. In the left list of the window, double-click the device IP or click the play icon to live view. 3. Optional: On the Live View page, control-click and select Capture to get the picture of the live view. 7.3 Organization Management On the main page of the Client Software, click configuration page. PersonalManagement to enter the 7.3.1 Add Organization Steps 1. In the organization list on the left, click +Add. 2. Enter the Organization Name as desired. 3. Click OK to save the adding. 4. Optional: You can add multiple levels of organizations according to the actual needs. 1) You can add multiple levels of organizations according to the actual needs. 2) Then the added organization will be the sub-organization of the upper-level organization. 29 Video Intercom Bundle Note Up to 10 levels of organizations can be created. 7.3.2 Modify and Delete Organization You can select the added organization and click You can select an organization, and click X button to delete it. to modify its name. The lower-level organizations will be deleted as well if you delete an organization. Make sure there is no person added under the organization, or the organization cannot be Note deleted. 7.4 Person Management After adding the organization, you can add person to the organization and manage the added person such as issuing cards in batch, importing and exporting person's information in batch, etc. Note Up to 2,000 persons can be added. Up to 5 cards can be added to each person. 7.4.1 Add Person Person information is necessary for the video intercom system. And when you set linked device for the person, the intercom between intercom devices can be realized. Steps 1. Select an organization in the organization list and click Add on the Person panel to pop up the The Person No. will be generated automatically and is editable. 2. Set basic person information. 1) Enter basic information: name, gender, tel, birthday details, effective period and email adding person dialog. Note address. Note The length of person name should be less than 15 characters. 2) Click Add face to upload the photo. 30 Video Intercom Bundle The picture should be in *.jpg format. Note Click Upload Select the person picture from the local PC to upload it to the client. Click Take Phone Take the person's photo with the PC camera. Click Remote Collection Take the person's photo with the collection device. 3. Issue the card for the person. 1) Click Credential Card . 2) Click + to pop up the Add Card dialog. 3) Select Normal Card as Card Type. 4) Enter the Card No. 5) Click Read and the card(s) will be issued to the person. 4. Link the device to the person. 1) Set the linked devices. Linked Device You can bind the indoor station to the person. Note Room No. You can enter the room No. of the person. 2) Click OK to save the settings. 5. Click Add to save the settings. 7.4.2 Modify and Delete Person Select the person and click Edit to open the editing person dialog. To delete the person, select a person and click Delete to delete it. If you select Analog Indoor Station in the Linked Device, the Door Station field will display and you are required to select the door station to communicate with the analog indoor station. Note If a card is issued to the current person, the linkage will be invalid after the person is deleted. 7.4.3 Change Person to Other Organization You can move the person to another organization if needed. 31 Video Intercom Bundle Steps 1. Select the person in the list and click Change Organization. 2. Select the organization to move the person to. 3. Click OK to save the settings. 7.4.4 Import and Export Person Information The person information can be imported and exported in batch. Steps 1. Exporting Person: You can export the added persons' information in Excel format to the local PC. 1) After adding the person, you can click Export Person to pop up the following dialog. 2) Click ... to select the path of saving the exported Excel file. 3) Check the checkboxes to select the person information to export. 4) Click OK to start exporting. 2. Importing Person: You can import the Excel file with persons information in batch from the local PC. 1) Click Import Person. 2) You can click Download Template for Importing Person to download the template first. 3) Input the person information to the downloaded template. 4) Click ... to select the Excel file with person information. 5) Click OK to start importing. 7.4.5 Get Person Information from Device If the added device has been configured with person information (including person details, fingerprint, issued card information), you can get the person information from the device and import to the client for further operation. Steps Note device. This function is only supported by the device the connection mothod of which is TCP/IP when adding the device. 1. In the organization list on the left, click to select an organization to import the persons. 2. Click Get from Device to pop up the dialog box. 3. The added device will be displayed. 4. Click to select the device and then click Get to start getting the person information from the 32 Video Intercom Bundle Note The person information, including person details, person's fingerprint information (if configured), and the linked card (if configured), will be imported to the selected organization. If the person name stored in the device is empty, the person name will be filled with the issued card No. after importing to the client. The gender of the persons will be Male by default. 7.4.6 Issue Card in Batch You can issue multiple cards for the person with no card issued in batch. Steps 1. Click Batch Issue Cards to enter the dialog page. All the added person with no card issued will display in the Person(s) with No Card Issued list. 33 Video Intercom Bundle 2. Click Settings. Figure 7-2 Issue Card in Batch 34 Video Intercom Bundle Figure 7-3 Card Settings 3. Select Card Type and Card No. Type. 4. Click OK to save the settings. Result After issuing the card to the person, the person and card information will display in the Person(s) with Card Issued list. 35 AccessControlInfo Access Group to enter the page. Video Intercom Bundle 7.4.7 Permission Settings Add Permissions Steps 1. On the main page, click 2. Click +Add to pop up the adding dialog box. 3. Configure the parameters. 1) Enter the Name of the permission. 2) Select the Template of the schedule. 3) Check the person to Selected according to your needs. 4) Check the device to Selected according to your needs. 4. Click Save. 5. Check the permission and click Apply All to Device. The status of the permission displays as Applied. 6. Optional: Click Applying Status to check the details. Modify/Delete Permissions On the page of the permission settings, click Select one or more permissions, click Delete to remove the permissions. to edit the parameters of the permission. 7.5 Video Intercom Settings The Video Intercom Management module provides the function of video intercom, checking call logs and managing notice via the iVMS-4200 Client Software. Note For the user with access control module permissions, the user can enter the Access Control module and manage video intercom and search information. You should add the device to the software and configure the person to link the device in Access Control module before your configuration remotely. On the main page, click bar to enter the Video Intercom page. AccessControlInfo Video Intercom Video Intercom on the left 36 Video Intercom Bundle 7.5.1 Receive Call from Door Station Steps 1. Select the client software in the page to start calling the client and an incoming call dialog will pop up in the client software. 2. Click Answer to answer the call. Or click Hang Up to decline the call. 3. After you answer the call, you will enter the In Call page. Click to adjust the volume of loudspeaker. Hang Up Click Hang Up to hang up. Click to adjust the volume of microphone. For door station, you can click remotely. to open the door Adjust the Volume of Loudspeaker Adjust the Volume of Microphone Unlock Remotely Note video intercom device. One video intercom device can only connect with one client software. The maximum ring duration can be set from 15s to 60s via the Remote Configuration of the The maximum speaking duration between indoor station and iVMS-4200 can be set from 120s to 600s via the Remote Configuration of indoor station. The maximum speaking duration between door station and iVMS-4200 can be set from 90s to 120s via the Remote Configuration of door station. 7.5.2 Release Notice You can create different types of notices and send them to the residents. Four notice types are available, including Advertising, Property, Alarm and Notice Information. Before You Start Make sure the person has been added to the client. Steps 1. On the video intercom settings page, click Notice to enter the page. 2. Click +Add to pop up the adding dialog box. 3. Select the person according to your needs. 4. Edit the Subject, Type and Information. 5. Click View to select the picture. 6. Click Send. 37 Video Intercom Bundle Note Up to 63 characters are allowed in the Subject field. Up to 6 pictures in the JPGE format can be added to one notice. And the maximum size of one picture is 512KB. Up to 1023 characters are allowed in the Information field. 7.5.3 Search Video Intercom Information Search Call Logs Steps 1. On the Video Intercom page, click Call Log to enter the page. 2. Set the search conditions, including call status, device type, start time and end time. Figure 7-4 Search Call Logs Click to unfold the drop-down list and select the call status as Dialed, Received or Missed. Or select All to search logs with all statuses. Call Status Device Type 38 Video Intercom Bundle Click to unfold the drop-down list and select the device type as Indoor Station, Door Station, Outer Door Station or Analog Indoor Station. Or select All Devices to search logs with all device types. Start Time/End Time Click the time icon to specify the start time and end time of a time period to search the logs. Reset the Settings Click Reset to reset all the configured search conditions. 3. Click Search and all the matched call logs will display on this page. 4. Optional: Check the detailed information of searched call logs, such as call status, ring/speaking duration, device name, resident organization, etc. 5. Optional: Input keywords in the Search field to filter the desired log. 6. Optional: Click Export to export the call logs to your PC. Search Notice Type Start Time/End Time Steps 1. On the Video Intercom page, click Notice to enter the page. 2. Set the search conditions, including notice type, start time and end time. Select Advertising Information, Property Information, Alarm Information or Notice Information as Type according to your needs. Click the time icon to specify the start time and end time of a time period to search the logs. Reset the Settings Click Reset to reset all the configured search conditiions. 3. Click Search and the matched notice will display on this page. 4. Optional: Click Export to export the notices to your PC. 7.5.4 Upload Armed Information Steps 1. On the main page, click upper right 2. Enable to arm or disarm the device. Note Tool DeviceGuard to enter the page. While device has been added to the client software, the device armed by default. When the device is armed, the alarm logs upload to the client software automatically. Click Alarm Application Event Search to search the alarm logs. 3. Optional: Click Arm All or Disarm All to arm or disarm all the device. 39 Video Intercom Bundle Appendix A. Communication Matrix and Device Command Communication Matrix Scan the following QR code to get the device communication matrix. Note that the matrix contains all communication ports of Hikvision access control and video intercom devices. Figure A-1 QR Code of Communication Matrix Device Command Scan the following QR code to get the device common serial port commands. Note that the command list contains all commonly used serial ports commands for all Hikvision access control and video intercom devices. Figure A-2 Device Command 40 UD28086B

FAIIK VISION IP Video Intercom Indoor Station Model: DS-KH6320-WTDE1 UP: 12V===4A PoE(37-57V) === 0.35A SN: AB1234567 ULAR wan Made in China FCC ID:2ADTD-KH6320WTDE1 _~-1C:20199-KH6320WTDE1 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)this device may not cause harmful interference, and

(2)this device must accept any interference received, including interference that may cause undesired operation. Manufacturer: Hangzhou Hikvision Digital Technology Co.,Ltd. Address: No.555 Qianmo Road, Binjiang District,Hangzhou 310052, China [=

se ote 1S On ana? HIKVISION ii

a) b) c) d) e) f) g) SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name Hangzhou Hikvision Digital Technology Co., Ltd. No. 555 Qianmo Road, Binjiang District Hangzhou 310052, China Address Grantee Code FCC ID Contact Email Contact Phone Authorized Contact Name Long Cheng 2ADTD 2ADTD-KH6320WTDE1 chenglong6@hikvision.com

+8618969187825 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

labeling the equipment with the exact FCC ID as specified in this application,

(1)

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Date:2022/06/21 Applicant Signature:

Print Name:

Title:

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Long Cheng Testing & Certification Engineer Applicant Declaration Rev:0.0

Hangzhou Hikvision Digital Technology Co., Ltd. TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Date: 2022-06-21 Regarding: FCC ID: 2ADTD-KH6320WTDE1 To whom it may concern:

We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Hangzhou Hikvision Digital Technology Co., Ltd. This authorization is valid until further written notice from the applicant. Name (Printed): Long Cheng Signature:

On behalf of Company: Hangzhou Hikvision Digital Technology Co., Ltd. Telephone: +8618969187825 Title: Testing & Certification Engineer

Confidentiality Request regarding application for FCC ID: 2ADTD-KH6320WTDE1 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States Hangzhou Hikvision Digital Technology Co., Ltd. To:

From: Hangzhou Hikvision Digital Technology Co., Ltd. No. 555 Qianmo Road, Binjiang District, angzhou 310052, China Regarding:

LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature:

Printed Name (on file with the FCC associated with the Grantee Code): Long Cheng Title: Testing & Certification Engineer Company Name: Hangzhou Hikvision Digital Technology Co., Ltd.

Hangzhou Hikvision Digital Technology Co., Ltd. Current Date : 2022-06-21 To:

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. No. 588 West Jindu Road, Songjiang District, Shanghai, China. 201612 Dear Sir/Madam, Subject: Declaration Letter about Identity of Products

*WE (Hangzhou Hikvision Digital Technology Co., Ltd.) HEREBY DECLARED THAT Product Description IP Video Intercom Indoor Station Model No. DS-KH6320-WTDE1UHK, DS-KH6320-WTDE1CKV, DS-KH6320-WTDE1UVS, DS-KH6320-WTDE1KVO, DS-KH6320-WTDE1HUN Manufacturers Name Hangzhou Hikvision Digital Technology Co., Ltd. Manufacturers Address No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China

*Except that the model number deviation, are identical with the original product as follows:

The definition of identical should be electrically identical. A device will be considered to be electrically identical if no changes are made to the devices schematics, board layouts, component layouts, chip sets, resistors and all other electrical aspects of the device are identical. with the model(s) below which samples we chose to be tested by SGS Model No. ():

DS-KH6320-WTDE1, Manufacturers Name ():

Hangzhou Hikvision Digital Technology Co., Ltd. Manufacturers Address):

No.555 Qianmo Road, Binjiang District, Hangzhou Sincerely, Signature ():

310052, China Printed Name ():

Long Cheng Position/Title ():

Testing & Certification Engineer Contact Number ():

+8618969187825 Note: