all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 1.01 MiB | December 01 2021 | |||
1 |
|
Internal photo | Internal Photos | 1.57 MiB | December 01 2021 | |||
1 |
|
External photo | External Photos | 923.55 KiB | December 01 2021 | |||
1 |
|
Label | ID Label/Location Info | 211.17 KiB | December 01 2021 | |||
1 |
|
Applicant Declaration Letter | Cover Letter(s) | 406.06 KiB | December 01 2021 | |||
1 |
|
Auth letter | Cover Letter(s) | 338.84 KiB | December 01 2021 | |||
1 |
|
Confidentiality request | Cover Letter(s) | 294.07 KiB | December 01 2021 | |||
1 |
|
MCL | Cover Letter(s) | 506.50 KiB | December 01 2021 | |||
1 |
|
Test report | Test Report | 1.31 MiB | December 01 2021 | |||
1 |
|
Test setup photo | Test Setup Photos | 865.33 KiB | December 01 2021 |
1 | User Manual | Users Manual | 1.01 MiB | December 01 2021 |
Z1 C Z2 Z3 C Z4 Z5 C Z6 Z7 C Z8 AUX- AUX+ Z9 C Z10 Z11 C Z12 Z13 C Z14 Z15 C Z16
-EXT +EXT PGM1 C1 C2 PGM2 a C1 PGM1 Peripheral Security Detector Peripheral Security Detector 2.2K TAMPER Security Control Panel NO C Local Zone Security Control Panel Local Zone Z C 2.2K NC C Z C 2.2K NO C Z C C N O N K 2
. 2 Detector b1 b2 b3 Z C 2.2k 8.2k NO C b4 Local Expanding Zone Z C 2.2k 8.2k NC C NC C Local Expanding Zone b5 2 3 A B
- BAT +
100~240 VAC C 5 xxxx Device DS-PM1-I16O2-WB Multi IO Transmitter Quick Start Guide 2 3 Appearance 1. LED Indicator Alarm Indicator Fault Indicator Enrollment Indicator 2. Power Switch 4. Tamper Switch Set up 1. 2. Open the shell. 3. Wiring Alarm: Solid red for 2s Fault alarm: Solid amber Enrollment completed:
Flashing green for 7 times 3. Wiring Terminal 5. Battery Holder A.Battery Plug B.Power Supply : 100 to 240 VAC C.Power Supply:-EXT and +EXT; AUX- and AUX+
a. Alarm Output(NO1/NC1 and COM1):PGM1 and C1 b. Alarm Input(NO2/NC2 and COM2):PGM2 and C2 b1. NC Detector b2. NO Detector b3. Tamper-proof b4. Dual-Zone Series Connection b5. Dual-Zone Parallel Connection D.Zone Input:Z1 to Z16 and C 4. Installation 5. Set up with App. 6. Power on the transmitter. Enrollment completed: Flashing green for 7 times. RF Frequency Modulation Method RF Distance Zone Input EOL Tamper Switch Relay Output 12 V Input 12 V Output Power Switch Series Port 433 MHz 2GFSK Two-way communication 800 m (open area) 16 1K, 2.2K, 4.7K, 8.2K 2 (Front and Rear) 2 1, Connects to the Battery 2-channel Total Consumption : 1 A 1 1 LED Status 3: Alarm/Tamper Red , Fault Amber
, Signal Strength Green/Red Power Supply Operation temperature Operation humidity Dimension (W x H x D) to 55 100 to 240 VAC 10 10% to 90%
199 x 261 x 86.4mm Weight 975 g (without battery) 3024g (with battery) 1 D 1 4 5 b 4 7 Times UD24266B-A 6 7 Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Alarma: Rojo fijo durante 2 s Alarma de fallo: mbar fijo Registro completado:
Parpadeo en verde 7 veces 3. Terminal de cableado 5. Compartimento de la pila Alarme: Vermelho fixo por 2 s Alarme de falha: laranja fixo Registro concludo:
piscando em verde 7 vezes 3. Terminal de fiao 5. Encaixe da pilha
2
7 3. Alarm: Rdea sveti 2 s Alarm za napako: Gori jantarna Vpis konan:
Zelena 7-krat zasveti 3. Terminal za oienje 5. Dralo za baterijo 2. 4. 5. 2. Stikalo za vklop/izklop 4. Stikalo za nedovoljene posege Espaol Apariencia 1. Piloto led Piloto de alarma Indicador de fallo Indicador de registro 2. Interruptor de alimentacin 4. Interruptor antimanipulacin Configuracin 1. 2. Abrir la carcasa. 3. Cableado Portugus Apresentao 1. Indicador LED Indicador de alarme Indicador de falha Indicador de registro 2. Interruptor 4. Chave de violao Configurao 1. 2. Abra o invlucro. 3. Cabos A. Conector de la batera B. Alimentacin elctrica: 100 a 240 VCA C. Fuente de alimentacin: -EXT y +EXT. AUX- y AUX+
a. Salida de alarma (NO1/NC1 y COM1): PGM1 y C1 b. Entrada de alarma (NO2/NC2 y COM2): PGM2 y C2 b1. Detector NC b2. Detector NO b3. Antimanipulacin b4. Conexin en serie de dos zonas b5. Conexin en paralelo de dos zonas D. Entrada de zona: Z1 a Z16 y C 4. Instalacin 5. Configurar mediante la aplicacin 6. Encienda el transmisor. Registro completado: Parpadeo en verde 7 veces. A. Plugue da bateria B. Alimentao: 100 a 240 VCA C. Alimentao: -EXT e +EXT; AUX- e AUX+
b1. Detector NF b2. SEM detector b3. Antiviolao b4. Ligao de zona dupla em srie b5. Ligao de zona dupla em paralelo D. Entrada de zona: Z1 a Z16 e C 4. Instalao 5. Configure com o aplicativo. 6. Ligue o transmissor. Registro concludo: Piscando em verde 7 vezes. 1. LED 1. 2. 3. A. B.
- 100 240 VAC C. EXT
+EXT AUX-
AUX+
b1. NC b2. NO b3. b4. b5. D. - Z1 Z16 C 4. 5. 6.
7 a. Sada de alarme (NO1/NC1 e COM1):PGM1 e C1 b. Entrada de alarme (NO2/NC2 e COM2): PGM2 e C2 a.
(NO1/NC1 COM1)- PGM1 C1 b.
(NO2/NC2 COM2)- PGM2 C2 Especificaciones Especificao Specifikacije Frecuencia de RF Modulacin Mtodo Distancia de radiofrecuencia Entrada de zona EOL Fin de lnea Interruptor antimanipulacin Salida de rel Entrada de 12 V Salida de 12 V 433 MHz 2GFSK Comunicacin bidireccional 800 m (zona abierta) 16 1K, 2,2 K, 4,7 K, 8,2 K 2 (parte delantera y trasera) 2 1, Se conecta a la batera 2 canales Consumo total: 1 A Interruptor de alimentacin Puerto serie 1 1 Frequncia de RF Modulao Mtodo Distncia de RF Entrada de zona EOL Chave de violao Sada do rel Entrada de 12 V Sada de 12 V Interruptor Porta serial Status do LED 433 MHz 2GFSK Comunicao bidirecional 800 m (rea aberta) 16 16 1K, 2,2K, 4,7K, 8,2K 1K, 2,2K, 4,7K, 8,2K 2 (frontal e traseira) 2 (frontal e traseira) 2 1, conecta-se bateria 2 canais Consumo total: 1 A 1 1 RF RF EOL 12 V 12 V Fuente de alimentacin Temperatura de funcionamiento Humedad de funcionamiento Dimensiones Peso 100 a 240 VCA
-10 C a 55 C 10 % a 90 %
199 x 261 x 86,4 mm 975 g (sin batera) 3024 g (con batera) Fonte de alimentao Temperatura de operao Umidade de operao Dimenses (L x A x P) Peso 100 a 240 VCA 100 a 240 VCA
-10 C a 55 C
-10 C a 55 C 10% a 90%
199 x 261 x 86,4 mm 199 x 261 x 86,4 mm 975 g (sem bateria) 3.024 g (com bateria)
(W x H x D) 433 MHz 2GFSK 800 m (
) 1K 2.2K 4.7K 8.2K 1 2
- 1 A 16 2 1 1
(/) 100 240 VAC
-10C 55C 10% 90%
199 x 261 x 86.4mm 975 g () 3024g (
) Estado del led 3: Alarma/Manipulacin (Rojo), Fallo (mbar), Fuerza de la seal
(Verde/Rojo) 3: Alarme/violao (vermelho), falha 3: Alarme/violao (vermelho), falha
(laranja), intensidade do sinal
(laranja), intensidade do sinal
(verde/vermelho)
(verde/vermelho) LED
() () Stanje LED 3-
3: Alarm/Nedovoljeno poseganje
(rdea), Napaka (jantarna), Mo signala (zelena/rdea) Slovenina Pregled naprave 1. Indikator LED Indikator alarma Indikator napake Indikator vpisa Nastavitev 1. 2. Odprite pokrov. 3. Povezovanje A. Baterijski vti B. Napajanje: od 100 do 240 VAC C. Napajanje:-EXT in +EXT; AUX- in AUX+
a. Izhod za alarm (NO1/NC1 in COM1): PGM1 in C1 b. Vhod za alarm (NO2/NC2 in COM2): PGM2 in C2 b1. NC-detektor b2. NO-detektor b3. Zavarovano pred nedovoljenim poseganjem b4. Povezava serij dvojnega obmoja b5. Vzporedna povezava dvojnega obmoja D. Vhod za cono: od Z1 do Z16 in C 4. Namestitev 5. Nastavite z aplikacijo. 6. Vklopite oddajnik. Vpis konan: Zelena 7-krat zasveti. RF-frekvenca Modulacija Metoda Razdalja RF Vhod za cono EOL Stikalo za nedovoljene posege Izhod releja Vhod 12 V Izhod 12 V 433 MHz 2GFSK Dvosmerna komunikacija 800 m (odprto obmoje) 16 1K, 2,2 K, 4,7 K, 8,2 K 2 (spredaj in zadaj) 2 1, povee se z baterijo 2-kanalni Skupna poraba: 1 A Stikalo za vklop/izklop Serijska vrata 1 1 Napajanje Operativna temperatura Operativna vlanost Dimenzije ( x V x G) Tea od 100 do 240 VAC od -10 C do 55 C od 10 do 90 %
199 x 261 x 86,4 mm 975 g (brez baterije) 3024 g (z baterijo) Srpski Izgled 1. LED indikator Indikator alarma Indikator kvara Indikator uvrtavanja 2. Prekida za napajanje 4. Prekida za spreavanje neovlaenih izmena Podeavanje 1. 2. Otvaranje kuita. 3. Povezivanje instalacija Alarm: Tamnocrveni 2 sekunde Alarm za kvar: Tamnouti bez prekida Uvrtavanje izvreno:
Zeleni LED indikator zatreperie 7 puta 3. Terminal za instalacije 5. Odeljak za bateriju A. Prikljuak za bateriju B. Izvor napajanja: Od 100 do 240 VAC C. Napajanje: -EXT i +EXT; AUX- i AUX+
a. Izlaz alarma (NO1/NC1 i COM1): PGM1 i C1 b. Izlaz alarma (NO2/NC2 i COM2): PGM2 i C2 b1. NC detektor b2. NO detektor b3. Otporno na neovlaene izmene b4. Serijska veza dualne zone b5. Paralelna veza dualne zone D. Izlaz zone: Z1 do Z16 i C 4. INSTALACIJA 5. Podeavanje pomou aplikacije. 6. Ukljuite odailja. Uvrtavanje izvreno: Zeleni LED indikator zatreperie 7 puta. Specifikacije RF frekvencija Modulacija Metod RF razdaljina Ulaz zone EOL 12 V izlaz Prekida za napajanje Serijski port Status LED-a Napajanje Radna temperatura Radna vlanost Dimenzije ( x V x D) Teina 433 MHz 2GFSK Dvosmerna komunikacija 800 m (otvoreni prostor) 16 1K, 2,2 K, 4,7 K, 8,2 K 2-kanalni Ukupna potronja: 1 A 1 1 3: Alarm/neovlaene izmene
(crveni), greka (tamnouti), jaina signala (zeleni/crveni) Od 100 do 240 VAC Od -10 C do 55 C Od 10 % do 90 %
199 x 261 x 86,4 mm 975 g (bez baterije) 3024 g (sa baterijom) 2 (
) Prekida za spreavanje neovlaenih izmena Izlaz releja 12 V ulaz 2 (prednji i zadnji) 2 1, Povezuje se sa baterijom English Espaol Portugus Slovenina 2021 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website (https://www.hikvision.com/). Please use this Manual with the guidance and assistance of professionals trained in supporting the Product. and other Hikvisions trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned are the properties of their respective owners. Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED "AS IS" AND "WITH ALL FAULTS AND ERRORS". HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNETPROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION,PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS. 2021 HangzhouHikvision Digital Technology Co.,Ltd. Todoslos derechosreservados. Sobre estemanual Este manual incluyelas instruccionesde utilizaciny gestindel producto. Lasfiguras, grficos,imgenes y cualquier otra informacin que encontrar enlo sucesivo tienen nicamente fines descriptivosy aclaratorios.La informacinincluida en el manual est sujetaa cambios,sin aviso previo, debidoa lasactualizaciones desoftware uotros motivos. Visite el sitio web de Hikvision https://www.hikvision.com/para acceder a laltima versinde estemanual. Utilice estemanual con la gua y asistencia deprofesionales capacitadosen el soporte del producto. y otrasmarcas comercialesy logotiposde Hikvisionson propiedad de Hikvision en diferentes jurisdicciones. Las demsmarcas comercialesy logotiposmencionados son propiedad de susrespectivos dueos. Descargo de responsabilidad EN LAMEDIDA MXIMAPERMITIDA PORLAS LEYES APLICABLES,ESTE MANUAL Y ELPRODUCTO DESCRITOINCLUIDOS SU HARDWARE,SOFTWARE Y FIRMWARE SE SUMINISTRANTAL CUAL Y CONTODOS SUFALLOS Y ERRORES. HIKVISION NOOFRECE GARANTAS,EXPLCITAS OIMPLCITAS, INCLUIDAS,A MODOENUNCIATIVO, COMERCIABILIDAD, CALIDAD SATISFACTORIAO IDONEIDADPARA UNPROPSITO ENPARTICULAR. ELUSO QUEHAGA DELPRODUCTO CORRE BAJOSU NICORIESGO. EN NINGNCASO, HIKVISIONPODR CONSIDERARSERESPONSABLE ANTEUSTED DE NINGN DAOESPECIAL, CONSECUENTE,INCIDENTAL O INDIRECTO, INCLUYENDO,ENTRE OTROS,DAOS POR PRDIDAS DE BENEFICIOS COMERCIALES,INTERRUPCIN DELA ACTIVIDADCOMERCIAL, PRDIDADE DATOS, CORRUPCIN DELOS SISTEMAS O PRDIDADE DOCUMENTACIN,YA SEAPOR INCUMPLIMIENTODEL CONTRATO, AGRAVIO (INCLUYENDONEGLIGENCIA), RESPONSABILIDADDEL PRODUCTO O ENRELACIN CONEL USODEL PRODUCTO, INCLUSOCUANDO HIKVISIONHAYA RECIBIDOUNA NOTIFICACINDE LAPOSIBILIDAD DEDICHOS DAOS O PRDIDAS. USTED RECONOCEQUE LANATURALEZA DEINTERNET IMPLICARIESGOS DE SEGURIDAD INHERENTES Y HIKVISIONNO TENDR NINGUNARESPONSABILIDAD POR EL FUNCIONAMIENTOANORMAL, FILTRACIONESDE PRIVACIDAD U OTROS DAOS RESULTANTES DE ATAQUES CIBERNTICOS, ATAQUESDE HACKERS,INFECCIONES DEVIRUS UOTROS RIESGOS DE SEGURIDAD DEINTERNET; SINEMBARGO, HIKVISIONPROPORCIONAR APOYOTCNICO OPORTUNODE SER NECESARIO. USTED ACEPTAUSAR ESTEPRODUCTO DECONFORMIDAD CONTODAS LAS LEYES APLICABLES Y SOLOUSTED ES EL NICO RESPONSABLEDE ASEGURAR QUE ELUSO CUMPLACON DICHASLEYES. ENESPECIAL, USTEDES RESPONSABLE DE USAR ESTEPRODUCTO DEFORMA QUENO INFRINJALOS DERECHOS DE TERCEROS,INCLUYENDO, DEMANERA ENUNCIATIVA MASNO LIMITATIVA,DERECHOS DEPUBLICIDAD, DERECHOSDE PROPIEDADINTELECTUAL, DERECHOS RELATIVOS A LA PROTECCINDE DATOSY OTROSDERECHOS RELATIVOS A LAPRIVACIDAD. NO UTILIZAR ESTE PRODUCTO PARANINGN USOFINAL PROHIBIDO,INCLUYENDO ELDESARROLLO OLA PRODUCCINDE ARMASDE DESTRUCCIN MASIVA,EL DESARROLLO O PRODUCCINDE ARMASQUMICAS OBIOLGICAS, NINGUNAACTIVIDAD EN EL CONTEXTO RELACIONADOCON ALGNEXPLOSIVO NUCLEARO ELCICLO DECOMBUSTIBLE NUCLEARINSEGURO OEN APOYO DEABUSOS DE LOS DERECHOS HUMANOS. EN CASODE HABERCONFLICTO ENTREESTE MANUAL Y LALEGISLACIN VIGENTE,ESTA LTIMAPREVALECER. 2021 Hangzhou Hikvision Digital Technology Co., Ltd. Todos os direitos reservados. Acerca deste Manual O Manual inclui instrues para utilizar e gerir o produto.As fotografias, os grficos, as imagens e todas as outras informaes doravante apresentadas destinam-se apenas a fins de descritivos e informativos. As informaes que constam do Manual esto sujeitas a alterao, sem aviso prvio, devido a atualizaes de firmware ou a outros motivos. Encontre a verso mais recente deste Manual no site da Hikvision (https://www.hikvision.com/). Utilize este Manual sob orientao e com a assistncia de profissionais formados neste Produto. e outras marcas registradas e logotipos da Hikvision so propriedade da Hikvision em diversas jurisdies. Outras marcas comerciais e logtipos mencionados so propriedade dos respetivos proprietrios. Aviso legal NA MEDIDA MXIMA PERMITIDA PELA LEI APLICVEL, ESTE MANUAL E OPRODUTO DESCRITO, COM O SEU HARDWARE, SOFTWARE E FIRMWARE, SO FORNECIDOS TAL COMO ESTO E COM TODAS AS SUAS FALHAS E ERROS. A HIKVISION EXCLUI, DE FORMA EXPLCITA OU IMPLCITA, GARANTIAS DE, INCLUINDO E SEM LIMITAO, COMERCIABILIDADE, QUALIDADE DO SERVIO OU ADEQUAO A UMA FINALIDADE ESPECFICA. A SUA UTILIZAO DESTE PRODUTO FEITA POR SUA CONTA E RISCO. EM NENHUMA CIRCUNSTNCIA, A HIKVISION SER RESPONSVEL POR SI EM RELAO A QUAISQUER DANOS ESPECIAIS, CONSEQUENCIAIS, INCIDENTAIS OU INDIRETOS, INCLUINDO, ENTRE OUTROS, DANOS PELA PERDA DE LUCROS COMERCIAIS, INTERRUPO DA ATIVIDADE, PERDA DE DADOS, CORRUPO DE SISTEMAS OU PERDA DE DOCUMENTAO SEJA COM BASE NUMA VIOLAO DO CONTRATO, ATOS ILCITOS (INCLUNDO NEGLIGNCIA), RESPONSABILIDADE PELO PRODUTO OU, DE OUTRO MODO, RELACIONADA COM A UTILIZAO DO PRODUTO, AINDA QUE A HIKVISION TENHA SIDO AVISADA SOBRE A POSSIBILIDADE DE TAIS DANOS OU PERDAS. O UTILIZADOR RECONHECE QUE A NATUREZA DA INTERNET OFERECE RISCOS DE SEGURANA INERENTES E QUE A HIKVISION NO SER RESPONSABILIZADA POR UM FUNCIONAMENTO ANORMAL, PERDA DE PRIVACIDADE OU OUTROS DANOS RESULTANTES DE ATAQUES INFORMTICOS, ATAQUES DE PIRATARIA, INFEO POR VRUS OU OUTROS RISCOS ASSOCIADOS SEGURANA DA INTERNET. NO ENTANTO, A HIKVISION PRESTAR APOIO TCNICO ATEMPADO, SE SOLICITADO. O UTILIZADOR ACEITA UTILIZAR ESTE PRODUTO EM CONFORMIDADE COM TODAS AS LEIS APLICVEIS E SER O NICO RESPONSVEL POR GARANTIR QUE A SUA UTILIZAO CONFORME LEI APLICVEL. PARTICULARMENTE, O UTILIZADOR ORESPONSVEL PELA UTILIZAO DESTE PRODUTO DE MODO QUE NO INFRINJA OS DIREITOS DE TERCEIROS, INCLUINDO, ENTRE OUTROS, OS DIREITOS DE PUBLICIDADE, DIREITOS DE PROPRIEDADE INTELECTUAL OU DE PROTEO DE DADOS, OU QUAISQUER OUTROS DIREITOS DE PRIVACIDADE. O UTILIZADOR NO PODER UTILIZAR ESTE PRODUTO PARA QUAISQUER UTILIZAES FINAIS PROIBIDAS, INCLUINDO O DESENVOLVIMENTO OU PRODUO DE ARMAS DE DESTRUIO MACIA, DESENVOLVIMENTO OU PRODUO DE QUMICOS OU ARMAS BIOLGICAS, QUAISQUER ATIVIDADES DESENVOLVIDAS NO MBITO DE EXPLOSIVOS NUCLEARES OU CICLOS DE COMBUSTVEL NUCLEAR INSEGURO OU PARA APOIAR ABUSOS AOS DIREITOS HUMANOS. NA EVENTUALIDADE DA OCORRNCIA DE ALGUM CONFLITO ENTRE ESTE MANUAL E A LEGISLAO APLICVEL, ESTA LTIMA PREVALECE. CAUTION PRECAUCIN CUIDADO This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the RE Directive 2014/53/EU, the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU. 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium
(Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info 1. 2. 3. 4. Install the equipment according to the instructions in this manual. This equipment is not suitable for use in locations where children are likely to be present. This equipment is suitable for use in gang box or other encloslure protected device only. To prevent injury, this equipment must be securely attached to the floor/wall in accordance with the installation instructions. 5. No naked flame sources, such as lighted candles, should be placed on the equipment. 6. The equipment has been designed, when required, modified for connection to an IT power distribution system. 7. A readily accessible disconnect device shall be incorporated external to the equipment. 8. 9. Burned fingers when handling the device. Wait one-half hour after switching off before handling The socket-outlet shall be installed near the equipment and shall be easily accessible. the parts. 10. Use only power supplies at the standard of 100 VAC to 240 VAC, 50/60 HZ. 11. The equipment shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the equipment. Ensure correct wiring of the terminals for connection to an AC mains supply. indicates hazardous live and the external wiring connected to the terminals requires installation by an instructed person. Este producto,y ensu casotambin losaccesorios suministrados,tienen la marca "CE"y portanto cumplen con lasnormas europeasarmonizadas aplicablesenumeradas enla Directivade equiposde radio 2014/53/UE, laDirectiva decompatibilidad electromagntica 2014/30/UE y la Directivade restriccindel uso desustancias peligrosas2011/65/UE. 2012/19/UE (directivaRAEE, residuosde aparatoselctricos y electromagnticos): Enla UninEuropea, los productos marcadoscon este smbolo no pueden ser desechados enel sistema de basuramunicipal sin recogida selectiva. Para un reciclaje adecuado, entregueeste productoen el lugar decompra delequipo nuevo equivalenteo deshgasede len el punto derecogida designadoa tal efecto.Para verms informacin, visite:www.recyclethis.info 2006/66/CE (directivasobre bateras):Este producto llevauna bateraque nopuede serdesechada en el sistema municipal debasuras sinrecogida selectivadentro dela UninEuropea. Consulte ladocumentacin del producto para verla informacinespecfica dela batera.La bateralleva marcado este smbolo, que incluye unasletras indicandosi contiene cadmio (Cd),plomo (Pb),o mercurio(Hg). Para un reciclaje adecuado, entreguela bateraa suvendedor o llvela alpunto derecogida debasuras designadoa tal efecto. Para ver msinformacin, visite:www.recyclethis.info 1. 2. 3. 4. Instale elequipo deacuerdo conlas instruccionesde estemanual. Este equipono esadecuado para utilizarlo enlugares dondepueda habernios. Este equiposolo es apto para empotrarlo en una caja deconexiones paraextensor uotra caja protectora. Para evitarlesiones, esteequipo debeestar firmemente sujeto alsuelo/pared deacuerdo conlas instrucciones deinstalacin. 5. No coloque llamas abiertas,como velasencendidas, sobreel equipo. 6. El equipo ha sido diseado,cuando esnecesario, con modificacionespara conectarloa unsistema de distribucin de alimentacin elctrica para equiposinformticos. Es necesarioincorporar al equipo undispositivo dedesconexin externo de fcilacceso. La tomade corrientetiene queestar cercadel equipo y serde fcil acceso. Riesgo dequemaduras enlos dedosal manipular el dispositivo.Espere mediahora despusde apagar el equipo para tocar laspartes. 7. 8. 9. 10. Utilice solamentealimentacin estndarde 100VCA a240 VCA,50/60 HZ. 11. No se expondr elequipo agoteos ni salpicadurasy nose colocarnsobre lobjetos llenosde lquidos, como jarrones. Asegrese deque elcableado delos terminalespara laconexin auna fuentede alimentacin deCA sea correcto. Indica circuitosbajo tensin(peligro de electrocucin) y quela instalacin delcableado externo conectado a los terminalesdebe estara cargode unapersona cualificada. Este produto e os acessrios fornecidos (se aplicvel) esto marcados com CE e esto em conformidade com os padres europeus compatveis e aplicveis listados nas Diretivas RE 2014/53/UE, EMC 2014/30/UE eRoHS 2011/65/UE. 2012/19/EU (Diretiva WEEE): os produtos marcados com este smbolo no podem ser descartados como rejeitos municipais no classificados na Unio Europeia. Para a reciclagem adequada, retorne este produto ao seu fornecedor local ao comprar um novo equipamento equivalente ou descarte-o em pontos de coleta designados. Para obter mais informaes, acesse: www.recyclethis.info 2006/66/EC (diretiva sobre baterias): este produto contm uma bateria que no pode ser descartada como um rejeito municipal no classificado na Unio Europeia. Refira-se documentao do produto para informaes especficas sobre baterias. A bateria marcada com este smbolo, que poder incluir letras para indicar cdmio (Cd), chumbo (Pb) ou mercrio (Hg). Para a reciclagem adequada, devolva a bateria ao fornecedor ou encaminhe-a a um ponto de coleta designado. Para obter mais informaes, acesse: www.recyclethis.info 1. 2. 3. 4. Instale o equipamento de acordo com as instrues neste manual. Este equipamento no adequado para uso em locais onde possa haver crianas. Este equipamento adequado para uso somente em uma caixa de distribuio ou outro dispositivo protegido por um compartimento. Para prevenir leses, este equipamento deve ser fixado de forma segura ao piso/parede, de acordo com as instrues de instalao. 5. Nenhuma fonte de chama desprotegida, como vela acesa, deve ser colocada sobre o equipamento. 6. O equipamento foi projetado para, quando necessrio, ser modificado para conexo a um sistema de distribuio de energia de TI. 7. Um dispositivo de desconexo facilmente acessvel dever ser incorporado na parte externa do 8. A sada da tomada dever ser instalada perto do equipamento e ser facilmente acessvel. 9. Voc pode queimar os dedos ao manusear o dispositivo.Aguarde meia hora aps desligar antes de equipamento. manusear as peas. 10. Use somente fontes de alimentao no padro de 100 VCA a 240 VCA, 50/60 HZ. 11. O equipamento no dever ficar exposto a gotas ou respingos e nenhum objeto com lquido, como um vaso, dever ser colocado no equipamento. 2021 Hangzhou Hikvision Digital Technology Co., Ltd.
(https://www.hikvision.com/) Hikvision Hikvision Hikvision HIKVISION
( ) HIKVISION HIKVISION HIKVISION HIKVISION
CE RE 2014/53/EU EMC 2014/30/EU RoHS 2011/65/EU 2012/19/EU (WEEE)-
www.recyclethis.info 2006/66/EC (
(Cd) (Pb)
(Hg) www.recyclethis.info 1. 2. POZOR 3.
6. IT 7. 4. 5. 8. 9. 10. 100 VAC 240 VAC 50/60 HZ 11. 2021 Hangzhou Hikvision Digital Technology Co., Ltd. Vse pravice pridrane. O tem prironiku Prironik vsebuje navodila za uporabo izdelka in upravljanje znjim. Slike, razpredelnice, podobe in druge informacije v njem sluijo zgolj opisovanju in pojasnjevanju. Informacije v prironiku se lahko zaradi sistemskoprogramskih posodobitev ali drugih razlogov spremenijo brez predhodnega obvestila. Najnoveja razliica tega prironika je na voljo na spletnem mestu Hikvision (https://www.hikvision.com/). Preberite ta prironik, ki vsebuje navodila in pomo strokovnjakov, usposobljenih za delo zizdelkom. in druge blagovne znamke in logotipi drube Hikvision so last drube Hikvision v razlinih dravah/regijah. Druge navedene blagovne znamke in logotipi so last njihovih zadevnih lastnikov. Izjava o omejitvi odgovornosti TA PRIRONIK IN OPISANI IZDELEK JE SKUPAJ S STROJNO IN PROGRAMSKO OPREMO TER VDELANO PROGRAMSKO OPREMO VNAJVEJI MONI MERI, KI JO DOVOLJUJE VELJAVNA ZAKONODAJA, PRIKAZAN, TAKEN, KOT JE, IN Z VSEMI OKVARAMI IN NAPAKAMI. DRUBA HIKVISION NE PODELJUJE NOBENIH JAMSTEV, TAKO IZRECNIH KOT IMPLICITNIH IN NE DOLOA OMEJITEV, USTREZNE KAKOVOSTI ALI PRIMERNOSTI ZA DOLOEN NAMEN. IZDELEK UPORABLJATE NA LASTNO TVEGANJE. DRUBA HIKVISION V NOBENEM PRIMERU NE ODGOVARJA ZA KAKRNO KOLI POSEBNO, POSLEDINO, NAKLJUNO ALI POSREDNO KODO, MED DRUGIM VKLJUNO S KODO, NASTALO ZARADI IZGUBE POSLOVNEGA DOBIKA, PREKINITVE POSLOVANJA ALI IZGUBE PODATKOV, OKVAR SISTEMOV ALI IZGUBE DOKUMENTACIJE, KRITVE POGODBE, KODNEGA DEJANJA
(VKLJUNO Z MALOMARNOSTJO),ODGOVORNOSTJO ZA IZDELEK ALI KODO, NASTALO VZVEZI Z UPORABO TEGA IZDELKA, TUDI E JE BILA DRUBA HIKVISION OBVEENA OMONOSTI TAKE KODE. STRINJATE SE, DA INTERNET SAM PO SEBI PREDSTAVLJA VARNOSTNA TVEGANJA, IN DRUBA HIKVISION NE PREVZEMA NOBENIH ODGOVORNOSTI ZA NENAVADNO DELOVANJE, RAZKRIVANJE OSEBNIH PODATKOV ALI DRUGO KODO, NASTALO ZARADI KIBERNETSKEGA NAPADA, NAPADA HEKERJA, OKUBE Z VIRUSOM ALI DRUGIH INTERNETNIH VARNOSTNIH TVEGANJ; KLJUB TEMU PA DRUBA HIKVISION PO POTREBI NUDI PRAVOASNO TEHNINO PODPORO. STRINJATE SE, DA BOSTE IZDELEK UPORABLJALI V SKLADU Z VELJAVNO ZAKONODAJO IN DA STE SAMI ODGOVORNI, DA BOSTE IZDELEK UPORABLJALI NA NAIN, KI JE SKLADEN Z VELJAVNO ZAKONODAJO. PRAV TAKO STE ODGOVORNI, DA BOSTE IZDELEK UPORABLJALI NA NAIN, KI NE KRI PRAVIC TRETJIH OSEB, VKLJUNO S PRAVICAMI JAVNOSTI, PRAVICAMI INTELEKTUALNE LASTNINE IN PRAVICAMI ZA VAROVANJE PODATKOV IN DRUGIMI OSEBNIMI PRAVICAMI, A NE OMEJENO NANJE. TEGA IZDELKA NI DOVOLJENO UPORABLJATI ZA KATERO KOLI OD PREPOVEDANIH UPORAB, VKLJUNO Z RAZVOJEMALI PROIZVODNJO OROJA ZA MNOINO UNIENJE, RAZVOJEM ALI PROIZVODNJO KEMINIH OZ. BIOLOKIH OROIJ, VSEMI DEJAVNOSTMI, POVEZANIMI Z JEDRSKIMI EKSPLOZIVNIMI TELESI ALI NEVARNIMI JEDRSKIMI GORILNIMI CELICAMI OZ. ZA ZLORABO LOVEKOVIH PRAVIC. V PRIMERU NESKLADJA MED TEM PRIRONIKOM IN VELJAVNIMI PRAVNIMI PREDPISI VELJAJO SLEDNJI. Ta izdelek in priloeni dodatki (e so na voljo) so oznaeni z oznako "CE" in so tako skladni z ustreznimi usklajenimi evropskimi standardi, ki jih navajajo Direktiva RE 2014/53/EU, Direktiva EMC 2014/30/EU in Direktiva RoHS 2011/65/EU. 2012/19 / EU (direktiva OEEO): Izdelkov, oznaenih s tem simbolom, v Evropski uniji ni mogoe odstraniti kot nesortirane komunalne odpadke. Za pravilno recikliranje vrnite izdelek vaemu lokalnemu dobavitelju ob nakupu enakovredne nove opreme ali ga odnesite na za to doloeno zbirno mesto. Ve informacij najdete na spletnem mestu: www.recyclethis.info 2006/66/EC (direktiva o baterijah): Ta izdelek vsebuje baterijo, ki je v Evropski uniji ni mogoe odstraniti kot nesortiran komunalni odpadek. Za podatke o baterijah glejte dokumentacijo izdelka. Baterija je oznaena s tem simbolom, ki lahko vkljuuje napis za oznaevanje kadmija (Cd), svinca (Pb) ali ivega srebra (Hg). Za pravilno recikliranje baterijo vrnite dobavitelju ali na doloeno zbirno mesto. Ve informacij najdete na spletnem mestu: www.recyclethis.info 1. Opremo namestite vskladu z navodili v tem prironiku. 2. 3. 4. Da prepreite pokodbe, mora biti oprema trdno nameena na tla/steno v skladu z navodili za Ta oprema ni primerna za uporabo na obmojih, kjer se bodo verjetno zadrevali otroci. Ta oprema je primerna samo za uporabo z dozoali drugo zaitno napravo. namestitev. 5. Na opremo ne smete postavljati virov odprtega ognja, kot so prigane svee. 6. Oprema je bila po potrebi zasnovana, prilagojena za priklop na IT-sistem za distribucijo elektrine energije. Zunaj opreme mora biti nameena lahko dostopna odklopna naprava. Elektrina vtinica mora biti nameena v bliini opremein lahko dostopna. 7. 8. 9. Opekline prstov pri ravnanju z napravo. Preden zanete delati z deli opreme, poakajte pol ure po izklopu le-te. 10. Uporabljajte samo napajanje s standardno napetostjo od 100 do 240 VAC, 50/60 Hz. 11. Oprema ne sme biti izpostavljena kapljanju ali pljuskanju in na opremo ne smete postavljati predmetov, napolnjenih s tekoino, kot so vaze. Certifique-se de que a fiao dos terminais est correta para conexo corrente eltrica CA. AC Poskrbite za pravilno oienje terminalov za prikljuitev na elektrino omreje zizmeninim tokom. Indica risco de choque eltrico e que a fiao externa conectada aos terminais requer ainstalao por uma pessoa treinada. oznauje nevarno napetost in zunanje oienje, prikljueno na terminale, zahteva namestitev s strani usposobljene osebe. Advertencia Este esun productode claseA. Enun entornodomstico esteproducto puedeocasionar interferencias radio, encuyo casoes posibleque seael usuarioel responsable deadoptar lasmedidas adecuadas. Aviso Este um produto de classe A.Em um ambiente domstico, este produto pode causar interferncia de rdio.Nesse caso, o usurio pode ter que tomar as providncias adequadas. class A Opozorilo To je izdelek razreda A. Ta izdelek lahko v domaek okolju povzroa radijske motnje, v tem primeru se od uporabnika zahteva, da sprejme ustrezne ukrepe. Warning This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Srpski FCC Information Please take attention that changes or modification notexpressly approved by the party responsible for compliance could void the users authorityto operate the equipment. FCC compliance: This equipmenthas been tested and found to comply withthe limits for a Class B digital device, pursuant topart 15 ofthe FCC Rules. These limits are designed toprovide reasonable protection against harmful interference in a residentialinstallation. This equipment generates, uses and can radiate radio frequency energy and, if not installed andused in accordance with the instructions, may cause harmful interference to radio communications. However, there isno guarantee that interference willnot occur in a particular installation. If this equipment does cause harmful interference toradio or television reception, which canbe determined by turning the equipmentoff and on, the user is encouraged to try to correctthe interferenceby one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separationbetween the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected. Consult the dealer or an experiencedradio/TV technician for help. This equipment should beinstalled and operated with a minimumdistance 20cm between the radiatorand your body. FCC Conditions This device complies with part 15of the FCC Rules. Operation is subject to the following two conditions:
1. This device maynot cause harmful interference. 2. This device must accept any interference received,including interference that may cause undesiredoperation 2021 Hangzhou Hikvision Digital Technology Co., Ltd. Sva prava zadrana. O ovom Priruniku Ovaj Prirunik sadri uputstva za korienje ovog proizvoda i upravljanje njime. Slike, grafikoni fotografije i sve ostale informacije sadrane u ovom dokumentu imaju iskljuivo ulogu opisa i objanjenja. Informacije sadrane u Priruniku mogu da se menjaju, bez najave, u skladu sa auriranjem firmvera i iz drugih razloga. Najnoviju verziju ovog Prirunika moete nai na Hikvision-ovom veb-sajtu (https://www.hikvision.com/). Ovaj Prirunik koristite uz savete i pomo od strane profesionalaca obuenih za podrku proizvodu. i drugi igovi i logotipi kompanije Hikvision vlasnitvo su kompanije Hikvision na raznim teritorijama. Drugi igovi i logotipi pomenuti u nastavku vlasnitvo su svojih odgovarajuih vlasnika. Odricanje odgovornosti U MERI U KOJOJ JE TO DOZVOLJENO VAEIM ZAKONOM, OVAJ PRIRUNIK I OPISANI PROIZVOD, SA PRIPADAJUIM HARDVEROM, SOFTVEROM I FIRMVEROM, ISPORUUJU SE KAKVI JESU I SA SVIM KVAROVIMA I MANAMA. HIKVISION NE DAJE NIKAKVE GARANCIJE, IZRIITE ILI PODRAZUMEVANE, UKLJUUJUI, ALI NE OGRANIAVAJUI SE NA TRINI POTENCIJAL, ZADOVOLJAVAJUI KVALITET, ILI PODESNOST ZA ODGOVARAJUE SVRHE. OVAJ PROIZVOD KORISTITE NA SOPSTVENI RIZIK. KOMPANIJA HIKVISION NI U KOM SLUAJU NEE IMATI ODGOVORNOST PREMA VAMA U SLUAJUBILO KAKVE POSEBNE, POSLEDINE, SLUAJNO NANETE ILI INDIREKTNE TETE, UKLJUUJUI, IZMEU OSTALOG, GUBITAK POSLOVNOG PROFITA, PREKID POSLOVANJA, GUBITAK PODATAKA ILI DOKUMENTACIJE, SISTEMSKIH KVAROVA, BILO DA SE ZASNIVAJU NA KRENJU UGOVORA, DELIKTU (UKLJUUJUI NEMAR), ODGOVORNOSTI ZA KVALITET PROIZVODA, ILI SU NA DRUGI NAIN VEZANI ZA KORIENJE OVOG PROIZVODA, AK I AKO JE KOMPANIJA HIKVISION BILA OBAVETENA O MOGUNOSTITAKVE TETE ILI GUBITKA. POTVRUJETE DA STE SVESNI INJENICE DA UPOTREBA INTERNETA PO PRIRODI PODRAZUMEVA ODREENE BEZBEDNOSNE RIZIKE, STOGA HIKVISION NEE SNOSITI NIKAKVU ODGOVORNOST ZA NEPRAVILAN RAD, NARUAVANJE PRIVATNOSTI, NITI ZA DRUGU TETU KOJA NASTANE USLED VISOKOTEHNOLOKOG NAPADA, HAKERSKOG NAPADA, ZARAZE VIRUSOM ILI DRUGOG VIDA NARUAVANJA BEZBEDNOSTI NA INTERNETU; S DRUGE STRANE, HIKVISION E PO POTREBI PRUITI PRAVOVREMENU TEHNIKU PODRKU. SLAETE SE SA UPOTREBOM OVOG PROIZVODA USKLADU SA SVIM VAEIM ZAKONIMA, I ISKLJUIVO VI STE ODGOVORNI ZA UPOTREBU PROIZVODA USKLADU SA VAEIM ZAKONOM. NAROITO STE ODGOVORNI DA OVAJ PROIZVOD KORISTITE TAKO DA TO NE NARUAVA PRAVA TREIH STRANA, UKLJUUJUI, ALI NE OGRANIAVAJUI SE NA PRAVA PUBLICITETA, INTELEKTUALNE SVOJINE ILI ZATITE PODATAKA, I DRUGA PRAVA VEZANA ZA PRIVATNOST. OVAJ PROIZVOD NE SMETE KORISTITI NI U KAKVE ZABRANJENE KRAJNJE SVRHE, UKLJUUJUI RAZVOJ ILI PROIZVODNJU ORUJA ZA MASOVNO UNITENJE, RAZVOJ ILI PROIZVODNJU HEMIJSKOG ILI BIOLOKOG ORUJA, BILO KAKVE AKTIVNOSTI U VEZI SA NUKLEARNIM EKSPLOZIVIMA ILI RIZINIM CIKLUSOM NUKLEARNOG GORIVA, ILI U VEZI SA POVREDOM LJUDSKIH PRAVA. U SLUAJU SUKOBA IZMEU OVOG PRIRUNIKA I VAEEG ZAKONA, POTONJI IMA PREDNOST. OPREZ Ovaj proizvod i ako je primenjivo sa njim dostavljena dodatna oprema nose oznaku CE i u skladu s tim su usklaeni sa odgovarajuim harmonizovanim evropskim standardima navedenim u Direktivi za radio-opremu 2014/53/EU, Direktivi za elektromagnetsku kompatibilnost 2014/30/EU i Direktivi za primenu opasnih supstanci u elektrinoj i elektronskoj opremi 2011/65/EU. 2012/19/EU (Direktiva za otpadnu elektrinu i elektronsku opremu): Proizvodi koji poseduju ovaj simbol ne smeju da se odlau kao neklasirani komunalni otpad u Evropskoj uniji. Da bi bio pravilno recikliran, vratite ovaj proizvod lokalnom distributeru kada kupite ekvivalentni novi ili ga odnesite na zvanino reciklano prikupljalite. Za vie informacija posetite: www.recyclethis.info 2006/66/EC (direktiva za baterije): Ovaj proizvod sadri bateriju koja ne sme da se odlae kao neklasirani komunalni otpad u Evropskoj uniji. Konkretne informacije o bateriji potraite u dokumentaciji proizvoda. Baterija poseduje ovaj simbol, na kom mogu da se nau slovne oznake koje oznaavaju prisustvo kadmijuma (Cd), olova (Pb) ili ive (Hg). Da bi bila pravilno reciklirana, vratite bateriju dobavljau ili je odnesite na zvanino reciklano prikupljalite. Za vie informacija posetite:
www.recyclethis.info Instalirajte opremu u skladu sa uputstvima u ovom priruniku. 1. 2. Ova oprema nije pogodna za upotrebu na mestima na kojima borave deca. 3. Ova oprema pogodna je samo za upotrebu u razvodnim kutijama ili sa drugim ureajima 4. Da ne bi dolo do fizikih povreda, ova oprema mora biti propisno privrena za pod/zid u skladu zatienim kuitem. sa uputstvima za instalaciju. 5. Na opremu se ne smeju stavljati izvori otvorenog plamena, poput upaljenih svea. 6. Oprema je dizajnirana tako da se po potrebi moe modifikovati za povezivanje na IT sistem za distribuciju elektrine energije. 7. Uz opremu mora se nalaziti i lako dostupan eksterni ureaj za prekid napajanja. 8. Utinica mora biti instalirana blizu opreme i mora biti lako dostupna. 9. Prilikom rukovanja ureajem moe doi do opekotina prstiju. Saekajte sat i po kad iskljuite ureaj pre rukovanja njegovim delovima. 10. Koristite samo napajanje od 100 VAC do 240 VAC, 50/60 HZ. 11. Oprema ne sme biti izloena kapanju ili prskanju, a na nju se ne smeju stavljati predmeti koji sadre tenost, poput vaza. Terminali moraju biti ispravno oieni za prikljuenje na izvor naizmenine struje. oznaava opasnost po ivot, a eksterno oienje povezano sa terminalima mora instalirati za to obuena osoba. Upozorenje Ovo je proizvod A klase. U kunomokruenju, ovaj proizvod moe da izazove radio-frekvencijske smetnje, te je u tom sluaju potrebno preduzeti odgovarajue mere.
1 | Label | ID Label/Location Info | 211.17 KiB | December 01 2021 |
FCC Werning Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference and
(2) this device must accept any interference received, Including interference that may cause undesired aperation. HIKVISION Multi lO Transmitter Model: DS-PM111602-WB UP: 100-240V~50/60Hz, 0.62A-0.26A SN: (12345678
| R-NZ MadeinChina FCC ID:2ADTD-M040116311 09/2021 Manufacturer: Hangzhou Hikvision Digital Technology Co.,Ltd. Address: No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China |
a iO}
1 | Applicant Declaration Letter | Cover Letter(s) | 406.06 KiB | December 01 2021 |
SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name Hangzhou Hikvision Digital Technology Co., Ltd. No. 555 Qianmo Road, Binjiang District Hangzhou 310052, China Address Grantee Code FCC ID Contact Email Contact Phone Authorized Contact Name Long Cheng 2ADTD 2ADTD-M040116311 chenglong6@hikvision.com
+8618969187825 a) b) c) d) e) I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;
in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:
(1)
(2)
(3) labeling the equipment with the exact FCC ID as specified in this application, compliance statement labeling pursuant to the applicable rules, compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.
(1)
(2)
(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Date:2021/10/23 Applicant Signature:
Print Name:
Title:
*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Long Cheng Testing & Certification Engineer Applicant Declaration Rev:0.0
1 | Auth letter | Cover Letter(s) | 338.84 KiB | December 01 2021 |
Hangzhou Hikvision Digital Technology Co., Ltd. TO:
Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2ADTD-M040116311 To whom it may concern:
Date: 2021-10-23 We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Hangzhou Hikvision Digital Technology Co., Ltd. This authorization is valid until further written notice from the applicant. Name (Printed): Long Cheng Title: Testing & Certification Engineer Signature:
On behalf of Company: Hangzhou Hikvision Digital Technology Co., Ltd. Telephone: +8618969187825
1 | Confidentiality request | Cover Letter(s) | 294.07 KiB | December 01 2021 |
Hangzhou Hikvision Digital Technology Co., Ltd. To:
SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Hangzhou Hikvision Digital Technology Co., Ltd. No. 555 Qianmo Road, Binjiang District, angzhou 310052, China Regarding:
Confidentiality Request regarding application for FCC ID: 2ADTD-M040116311 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Schematic(s) Block Diagrams Operational Descriptions Sincerely, Signature:
Printed Name (on file with the FCC associated with the Grantee Code): Long Cheng Title: Testing & Certification Engineer Company Name: Hangzhou Hikvision Digital Technology Co., Ltd.
1 | MCL | Cover Letter(s) | 506.50 KiB | December 01 2021 |
Hangzhou Hikvision Digital Technology Co., Ltd. Current Date : 2021-10-23 To:
SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. No. 588 West Jindu Road, Songjiang District, Shanghai, China. 201612 Dear Sir/Madam, Subject: Declaration Letter about Identity of Products
*WE (Hangzhou Hikvision Digital Technology Co., Ltd.) HEREBY DECLARED THAT Product Description Multi IO Transmitter Model No. DS-PM1-I16O2-WBUHK,DS-PM1-I16O2-WBCKV, DS-PM1-I16O2-WBUVS,DS-PM1-I16O2-WBKVO,DS-PM1-I16O2-WBHUN Manufacturers Name Hangzhou Hikvision Digital Technology Co., Ltd. Manufacturers Address No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
*Except that the model number and appearance deviation, are identical with the original product as follows:
Note: The definition of identical should be electrically identical. A device will be considered to be electrically identical if no changes are made to the devices schematics, board layouts, component layouts, chip sets, resistors and all other electrical aspects of the device are identical. Model No. ():
DS-PM1-I16O2-WB Manufacturers Name ():
Hangzhou Hikvision Digital Technology Co., Ltd. Manufacturers Address): No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Sincerely, Signature ():
Printed Name ():
Long Cheng Position/Title ():
Testing & Certification Engineer Contact Number ():
+8618969187825
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2021-12-01 | 433.4 ~ 433.4 | DXX - Part 15 Low Power Communication Device Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2021-12-01
|
||||
1 | Applicant's complete, legal business name |
Hangzhou Hikvision Digital Technology Co., Ltd.
|
||||
1 | FCC Registration Number (FRN) |
0024149825
|
||||
1 | Physical Address |
No. 555 Qianmo Road, Binjiang District
|
||||
1 |
Hangzhou, N/A 310052
|
|||||
1 |
China
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
U******@SGS.COM
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
2ADTD
|
||||
1 | Equipment Product Code |
M040116311
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
L****** C******
|
||||
1 | Telephone Number |
+8618********
|
||||
1 | Fax Number |
+86-5********
|
||||
1 |
c******@hikvision.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
SGS-CSTC Standards Technical Services Co., Ltd.
|
||||
1 | Name |
P****** Z********
|
||||
1 | Physical Address |
588 West Jindu Road, Xinqiao, Songjiang
|
||||
1 |
ShangHai, 201612
|
|||||
1 |
China
|
|||||
1 | Telephone Number |
+8621********
|
||||
1 | Fax Number |
02161********
|
||||
1 |
P******@sgs.com
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
SGS-CSTC Standards Technical Services Co., Ltd.
|
||||
1 | Name |
P******** Z****
|
||||
1 | Physical Address |
No. 10 Weiye Rd, Innovation Park
|
||||
1 |
Kunshan City, Jiangsu, 215300
|
|||||
1 |
China
|
|||||
1 | Telephone Number |
+8621********
|
||||
1 | Fax Number |
02161********
|
||||
1 |
P******@sgs.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DXX - Part 15 Low Power Communication Device Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Multi IO Transmitter | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Compliance Certification Services (Kunshan) Inc.
|
||||
1 | Name |
J****** C********
|
||||
1 | Telephone Number |
+ 86-******** Extension:
|
||||
1 |
J******@sgs.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 433.40000000 | 433.40000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC