Speed Dome Quick Start Guide Radar PTZ CameraQuick Start Guide Quick Start Guide 2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. This Manual is the property of Hangzhou Hikvision Digital Technology Co., Ltd. or its affiliates (hereinafter referred to as Hikvision), and it cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of Hikvision. Unless otherwise expressly stated herein, Hikvision does not make any warranties, guarantees or representations, express or implied, regarding to the Manual, any information contained herein. About this Manual The Manual includes instructions for using and managing Radar PTZ Camera. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website (http://www.hikvision.com). Please use this Manual with the guidance and assistance of professionals trained in supporting the Product. Trademarks Acknowledgement owners. LEGAL DISCLAIMER and other Hikvisions trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned are the properties of their respective TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED AS IS AND WITH ALL FAULTS AND ERRORS. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF i Radar PTZ CameraQuick Start Guide THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. THE LATER PREVAILS. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, 050520200411 ii Radar PTZ CameraQuick Start Guide Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU. 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information, see: www.recyclethis.info. 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium
(Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info. Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements. iii Radar PTZ CameraQuick Start Guide Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into Warnings and Cautions:
Warnings: Neglecting any of the warnings may cause serious injury or death. Cautions: Neglecting any of the cautions may cause injury or equipment damage. Warnings Follow these safeguards to prevent serious injury or death. Cautions Follow these precautions to prevent potential injury or material damage. Warnings In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region. Refer to technical specifications for detailed information. Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source with 24 VAC according to the IEC60950-1 standard. Refer to technical specifications for detailed information. Do not connect several devices to one power adapter as adapter overload may cause over-heating or a fire hazard. Make sure that the plug is firmly connected to the power socket. Make sure that the power has been disconnected before you wire, install or dismantle the speed dome. When the product is mounted on wall or ceiling, the device shall be firmly fixed. If smoke, odor or noise rise from the device, turn off the power at once and unplug the power cable, and then contact the service center. If the product does not work properly, contact your dealer or the nearest service center. Never attempt to disassemble the speed dome yourself. (We shall not assume any responsibility for problems caused by unauthorized repair or maintenance.) Cautions CAUTION: Hot parts! Burned fingers when handling the parts. Wait one-half hour after switching off before handling parts. This sticker is to indicate that the marked item can be hot and should not be touched without taking care. For device with this sticker, this iv Radar PTZ CameraQuick Start Guide device is intended for installation in a restricted access location, access can only be gained by service persons or by users who have been instructed about the reasons for the restrictions applied to the location and about any precautions that shall be taken. The high beam of IR supplement light at the distance of 200 mm is classified as Risk Group 1 (RG1). The white alarm light in solid mode is classified as Risk Group 2 (RG2). The minimum safe distance is approximately 1.5 m away from the device. Possibly hazardous optical radiation emitted from this product may be harmful to the eyes. Do not stare at operating light source. If appropriate shielding or eye protection is not available, turn on the light only at a safe distance or in the area that is not directly exposed to the light when installing or maintaining the device. If the speed dome fails to synchronize local time with that of the network, you need to set up speed dome time manually. Visit the speed dome (via web browser or client software) and enter system settings interface for time settings. Make sure the power supply voltage is correct before using the speed dome. Do not drop the speed dome or subject it to physical shock, and do not expose it to high electromagnetism radiation. Avoid installation on vibrations surface or places subject to shock (ignorance can cause device damage). Do not touch senor modules with fingers. If cleaning is necessary, use clean cloth with a bit of ethanol and wipe it gently. If the speed dome will not be used for an extended period, replace the lens cap to protect the sensor from dirt. Do not aim the speed dome at the sun or extra bright places. Blooming or smearing may occur otherwise (which is not a malfunction), and affect the endurance of sensor at the same time. The sensor may be burned out by a laser beam, so when any laser equipment is in using, make sure that the surface of sensor will not be exposed to the laser beam. Do not place the speed dome in extremely hot (the operating temperature shall be
-40C to 70C (-40F to 158F)), cold, dusty or damp locations, and do not expose it to high electromagnetic radiation. To avoid heat accumulation, good ventilation is required for operating environment. Keep the speed dome away from liquid while in use. While in delivery, the speed dome shall be packed in its original packing, or packing of the same texture. present. This equipment is not suitable for use in locations where children are likely to be CAUTION: Risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to the instructions ATTENTION: IL Y A RISQUE D'EXPLOSION SI LA BATTERIE EST REMPLACE PAR UNE BATTERIE DE TYPE INCORRECT. METTRE AU REBUT LES BATTERIES USAGES CONFORMMENT AUX INSTRUCTIONS Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery, which may result in an explosion. v Radar PTZ CameraQuick Start Guide Do not leave the battery in an extremely high temperature surrounding environment, which may result in an explosion or the leakage of flammable liquid or gas. Do not subject the battery to extremely low air pressure, which may result in an explosion or the leakage of flammable liquid or gas. Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or equivalent type only. Dispose of used batteries according to the instructions provided by the battery manufacturer. Lutilisation ou le remplacement inadquats de la pile peuvent entraner un risque dexplosion. Remplacez-la par le mme type ou lquivalent du mme type seulement. Jetez les piles usages conformment aux directives fournies par le fabricant de la pile. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. vi Radar PTZ CameraQuick Start Guide Table of Contents 1 Overview ...................................................................................................... 1 1.1 Radar PTZ Camera Overview ................................................................................ 1 1.2 Cable Interfaces ................................................................................................... 1 1.3 Alarm Output ...................................................................................................... 2 2 Installation ................................................................................................... 3 2.1 Wall Mounting ..................................................................................................... 3 2.2 Pendant Mounting ............................................................................................... 7 2.3 Installation of Network Cable Waterproof Jacket .................................................. 9 2.4 Installation of Water-proof Tape ......................................................................... 10 2.5 Protective Measures for Outdoor Installation ..................................................... 12 3 Activate and Access Network Camera ......................................................... 12 vii Radar PTZ CameraQuick Start Guide 1 Overview Refer to the figure below for the cable interfaces of the device and the location of memory card slot. 1.1 Radar PTZ Camera Overview The figures below are for reference only, refer to the actual product as the standard. Figure 1-1 Overview of Radar PTZ Camera 1.2 Cable Interfaces The cable interfaces of the device are shown below. The cables are distinguished by different colors. Refer to the labels attached on the cables for identification. Notes:
The cables vary depending on different models. Make sure the device is power-off before you connect the cables. Water-proof treatment is required for cable connectors. Refer to Section 2.3 and 2.4 for details. 1 Radar Module Memory Card Radar PTZ CameraQuick Start Guide Figure 1-2 Cable Interfaces 1.3 Alarm Output Alarm output is shown below. Figure 1-3 Alarm Output 2 Power Cord RS-485 Audio & Alarm Network Cable Direct load Relay Output OUT (n) OUT (n)
DC Relay Output OUT (n) OUT (n) GND Output DC 30V 1A Power Supply JQC-3FG Relay
(10A 250VAC)
~220V AC FireWire Zero Line Radar PTZ CameraQuick Start Guide 2 Installation Before you start:
Check the package contents and make sure that the device in the package is in good condition and all the assembly parts are included. Notes:
For better detection effect, it is recommended to install the device in spacious area without blocking. The tilt angle of the device should be less than 5. The recommended mounting height is 4 to 5 m. The radar module should directly face to the target. Do not touch the bubble directly by hand. The image blurs otherwise. Do not power the speed dome up until the installation is finished. To ensure the safety of personnel and equipment, all the installation steps should be done with power supply off. Do not drag the speed dome with its waterproof cables; otherwise the waterproof performance is affected. Figure 2-1 Do Not Drag the Cables 2.1 Wall Mounting Notes:
3 Radar PTZ CameraQuick Start Guide For cement wall, you need to use the expansion screw to fix the bracket. The mounting hole of the expansion pipe on the wall should align with the mounting hole on the bracket. For wooden wall, you can just use the self-tapping screw to fix the bracket. Make sure that the wall is strong enough to withstand more than eight times the weight of the speed dome and the accessories. Water-proof treatment is required for cable connectors. Refer to Section 2.3 and 2.4 for details. Steps:
1. Install the bracket. 1) 2) 3) Drill four screw holes in the wall according to the holes on the bracket, and then insert four expansion screws into the mounting holes. Attach the bracket to the wall by aligning the four screw holes on the bracket with four expansion screws on the wall. Secure the bracket with four sets of hex nuts and washers. Figure 2-2 Install the Bracket 2. Use the wrench to fix head cover on the bracket. Note:
Make sure the radar module is directly face to the moving target. 4 Radar PTZ CameraQuick Start Guide 3. Hook the speed dome to the bracket with supplied safety rope. Figure 2-3 Install Head Cover Figure 2-4 Use Safety Rope to Hook the Camera to the Bracket 5 Radar Detection Range Radar PTZ CameraQuick Start Guide 4. Route and connect the cables through the head cover and bracket. Note:
Water-proof treatment is required for cable connectors. Refer to Section 2.3 and 2.4 for details. Figure 2-5 Connect the Cables 5. Align the speed dome with the head cover. Use the wrench to tighten the lock screws. Figure 2-6 Secure the Speed Dome 6 Lock Screws Radar PTZ CameraQuick Start Guide 2.2 Pendant Mounting Steps:
1. Drill four holes on the ceiling to match those on the pendant mount bracket. Figure 2-7 Pendant Mount 2. Route the cables through the bracket, then align the base plate to the holes and fix it to the ceiling with four screws. Figure 2-8 Route the Cables and Fix the Bracket on the Ceiling 3. Use the wrench to fix the head cover on the bracket. Note:
Make sure the radar module can directly face to the moving target. 7 Radar PTZ CameraQuick Start Guide 4. Hook the speed dome to the bracket with supplied safety rope. Figure 2-9 Fix the Head Cover Figure 2-10 Use Safety Rope to Hook the Camera with Bracket 5. Connect the cables, and align the speed dome with the head cover, using wrench to tighten the screws on the head cover. 8 Radar Detection Range Radar PTZ CameraQuick Start Guide Note:
Water-proof treatment is required for cable connectors. Refer to Section 2.3 and 2.4 for details. Figure 2-11 Finish the Installation 2.3 Installation of Network Cable Waterproof Jacket Purpose:
If the camera is installed outdoor, you should use the waterproof accessory or tapes to waterproof the cables. Otherwise the cables might get wet or a short circuit occurs. Figure 2-12 Install Waterproof Jacket Steps:
1. Feed the network cable through and in order. 2. Fix on the network cable between and . 9 Lock Screws Align Radar PTZ CameraQuick Start Guide 3. Place onto the end of , and plug the RJ45 male connector into RJ45 female connector. 4. Screw to clockwise. 5. Push into . 6. Secure with the in clockwise direction. 2.4 Installation of Water-proof Tape Purpose:
If the camera is installed outdoor, you can use supplied water-proof tape to protect cable connectors and unused cables after the camera is secured on the installation surface. Steps:
1. Tear off the yellow release paper on the back of the water-proof tape. 2. Stretch the water-proof tape to reach twice the initial length. Figure 2-13 Stretch the Water-proof Tape 3. Wrap the water-proof tape around the cable connector tightly as the figure below. Figure 2-14 Wrap the Water-proof Tape 10 Initial Length Stretch Stretch Waterproof Tape Length After Stretching Cable Connector Radar PTZ CameraQuick Start Guide Note:
Make sure that all naked wires are all firmly wrapped in the water-proof tape. 4. Press the tape on both ends of the connector to make sure no water can get in as the figure below. Figure 2-15 Press the Water-proof Tape 5. Wrap the water-proof tape around the remaining unused cables tightly as the figure below. Figure 2-16 Wrap the Unused Cables Note:
Make sure that all naked wires are all firmly wrapped in the water-proof tape. 6. Press the tape to make sure no water can get in as the figure below. Figure 2-17 Press the Water-proof Tape 11 Press s s e r P P re ss Press Press s s e r P P re ss Press Radar PTZ CameraQuick Start Guide 2.5 Protective Measures for Outdoor Installation If the device is installed outdoors, necessary protective measures should be taken to ensure safety. Scan the following QR code to get protective measures for outdoor installation. 3 Activate and Access Network Camera Scan the QR code to get Activate and Visit Network Camera. Note that mobile data charges may apply if Wi-Fi is unavailable. 12 Radar PTZ CameraQuick Start Guide 13 UD16629B-A