Quick Start Guide Please read the quick start guide carefully and keep it properly.
Table of Contents
Packing List Camera Appearance Operation EZVIZ SPORTS APP S1 Features S1 Remote Control
Appearance Main Menu Operation S1 Connects to Display Appendix Modes Description Appendix Parameters Description Restricted substances or elements identification 4 Packing List Open the packet and check whether the S1 sports camera (Hereinafter referred to as S1) and all accessoriess is in good condition. S1 X1 USB Data Cable X1 Power Adaptor X1 Quick Start Guide X1 5 Appearance Description 1 2 3 4 5 6 6 7 8 9 10 11 12 13 14 1 2 3 4 5 Shutter Start/Stop Shooting Camera Status Indicator Blue steady: Standby;
Flicker: Camera is on. MIC Lens Audio Input 152Wide Angel Power Camera Indicator Red light steady when charging. Red light off when fully charged. 6 USB Port USB data trasfer Micro SD Card Recommendation
7 8 9 10 11 12 13 14 Micro SD Card Slot
micro HDMI Power Button Reset Wi-Fi Indicator HDMI Output Press and hold for 1 second to power on, 3 seconds to power off. Reset button. Purple filcker: Wi-Fi is turning on.Blue Flicker: Wi-Fi is on. Wi-Fi On/Off Button Press and hold 3 seconds to switch the Wi-Fi on or off. Standard Bracket Interface(1/4 inch) Interface to all brackets. Buzzer Audio Alert 7 Operation Step 1 Insert micro SD card. Insert the micro SD card into the card slot. Micro SD Card Recommendation 8 Step 2 Power on the camera.
Connect the power cable. Use the USB cable to charge. When the power indicator goes off, the power is fully charged. You are recommended to fully charge the S1 when it is the first time you use it. Power on the camera. Press the for one second, and you will hear the buzzer alerts 5 times. The indicator blinks in purple. When the indicator turns steady blue, the S1 is power-on and standby. Press the power button and the Wi-Fi button at the same time to restore the default settings. 9 Step 3 Start Recording
Start recording. Press record button once,the camera starts recording, and the camera indicator flickers in blue. Stop recording. Press record button, the camera stops recording, and the camera indicator is on You can choose to switch record, capture, burst snapshot with EZVIZ SPORTS App. If no operation with in 120 seconds, the S1 camera shuts down automatically. 10 Step4 Connect to the display. You can connect to the S1 to the display to vide the video and picture. Connect the S1 camera and the display with a HDMI wire. Press the the power button and the record button at the same time and then you can view the video and picture stored on the micro SD card on the display. Display HDMI Cable mini HDMI Interface 11 EZVIZ SPORTS APP Download and install the EZVIZ App, you can get the live video, playback and control the camera.
Download EZVIZ SPORTS App. Use the mobile phone to scan the QR code or search in the App Store to download the EZVIZ SPORTS App. 12
Turn on Wi-Fi of the S1 camera. Press the Wi-Fi button for 3 seconds. When the status indicator flickers in blue, the Wi-Fi is on. Connect the Wi-Fi of the camera and your phone. Turn on the Wi-Fi of your mobile phone. Default Wi-Fi Name: EZVIZ_XXXX Default Wi-Fi Password: 1234567890 You can change the Wi-Fi password and name of the camera with the app. After restore default settings, the Wi-Fi name and Wi-Fi password are restored to default. 13
What you can do with EZVIZ SPORTS Open EZVIZ SPORTS App. You can set the parameters as you requested. After configuration, you can use the App to record, take photo, share your video and so on. S1
14 S1 Remote Control User Manual 16 Appearance Description 1 2 3 4 5 6 7 1 Display OLED Display 2 3 4 5 6 Power Indicator Return
/Set Button Sensor Switch Button Power Button
/OK Button 7 USB Port Red steady when charging;
Blue steady when fully charged. Press to enter setting interface of the current function When in the sub-menu, press to return upper level menu. UV Sensor Switch to next mode or parameters Press to power on; press and hold for 3 seconds to power off When setting, press to enter. External power supply (you can use the USB cable and power adaptor of S1.) 17 OSD Description GUI Description 1 2 3 1280-60 38:35/59:42 4 5 6 1 2 3 4 5 6 S1 Current Mode
:Recording
:Photo
:Delay capture
:Burst The first number indicates the resolution of video or photo. TheC second is the capture speed and delay interval. Time already recorded and time left for recording/
Captured picture and picture number left for photo S1 Current Battery
Looping (Appears only in recording mode.) Apprears when bluetooth is connected. See Appendix for detailed main menu modes descripion. 18 Operation
Connect the power Use the USB port to charge the battert, when the power indicator goes steady blue, the battery is fully charged. The battery life is 30 days. Start up the remote Press , the remote is on. EZVIZ logo, verision, battery, bluetooth and S1 status will be displayed. V1.2.2 BLUETOOTH REMOTE L O A D I N G . S1 POWER ON BLUETOOTH CONNECTED The remote shuts down automatically if it is not connected to the S1 in 30 seconds. Buttons are invalid when the remote is starting up. 19
Pair the S1 and the remote The remote and the S1 are paired by default. If tou use the remote to control another S1,or if you find the bluetooth icon flickers when starting up, you need to pair them before any operation. 1 Press the and the button at the same time the remote starts searching the S1 nearby. SEARCHING... 20 2 After power on S1 for 10 seconds, the remote can find the S1 serial No.. 123456789 EXIT If the S1 is not found, it showsS1 NOT FOUNDand then the remote shuts down automatically. SI NOT FOUND You can restart the S1 and the remote and pair then again. 21 3 Press to switch to your S1 and press to pair them. BLUETOOTH CONNECTED The remote enters the main menu, see the following figure. 1280-60 38:35/59:42 22
Cancel remote and S1 pairing (Optional) You can also cancel the pairing. 1 Enter the main menu and press and for 5 seconds. BLE CLEARED NEED RESET 2 Press and to reset the remote to cancel the pairing. 23 Cancel remote and S1 pairing (Optional) Enter the main menu and press and
Power on/off S1 Start up the remote, if the S1 is powered off, you can power it on with the remote. POWER OFF S1 POWER ON S1 After the S1 is powered off, the remote shows POWER ON S1. If you dont power it on for 120 seconds, the remote shuts itself down automatically. Settings
Set S1 parameters as you demand. Enter the main menu and press , until the setting interface shows. Press to enter the setting menu.
Switch to next item.
Enter
Return to previous item. 24 Choose the setting you want to set, press the to enter the setting interface directly.
S1 Operation
Press the to execute the current command. E.g. Press the button when in burst mode. The S1 starts burst capture with the preset parameters No operation for 120 seconds, the remote goes to hiberate mode to save battery. Press the button to activate the remote.
Shut down the remote Press the button for 3 seconds to shut the remote down. You can press the and button to reset the remote. (Invalid when charging) When the remote is powered off for 20 minutes the bluetooth of S1 stops broadcasting. If you power on the remote, you need to press the power button of S1 or restart the S1 manually to pair the S1 and remote. 25 Enter the main menu and press , until the S1 Connecting to Display Choose the setting you want to set, press the to enter the setting interface directly. and video stored. You can connect the S1 to a display to view the photo Connect the S1 and display with HDMI wire, power on S1, and the remotes shows HDMI. HDMI Press to switch; Press to confirm. 26 Appendix Modes Description In the main menu of the reomte, thera are photo, burst, Delay, UV and power on/off S1. Record Mode 1280-60 38:35/59:42 In photo mode, press the button on the remote or the button on S1 to start recording. And in the remote, recording time is displayed. 1280-60 00:01 In photo mode, press the button on the remote or the button on S1 to stop recording. And in the remote, remaining recording time is displayed. 27 Photo Mode 12M 386 / 532 In photo mode, press the button on the remote or the button on S1 to take a photo. After taking the photo, the number of photo captured and the remaining capacity for photo are changed. 28 Burst Mode Capture many photos in a certain time;
E.g.5PCS/1S,10PCS/1S,10PCS/2S,30PCS/1S,30PCS/2S When you set it as 10PCS/2S, S1 captures 10 photos in 2 seconds. 10PCS/2S 386 / 532 In burst mode press the button on the remote or press the record button on S1 to start capture. Burst Capture After burst capture, S1 is in standby mode. 29 Delay Capture Capture after a pre-defined time. E.g., when set the delay time as 0.5SEC, press the record/capture button, the camera capture 1 photo after 5 seconds. 12M 0.5SEC 386 / 532 Press the button on the remote or press the button on the S1 camera to start delay capture. Press the button again to stop capture. 30 UV Detector Mode The remote can detect the UV indicators outdoor to provide information for you to choose protection. UV Value 309 UV Level UV Level Weak Weak
No protection required. Medium Wear sunhat and sunglasses Strong
Very Strong
Extremely Strong
Wear sunhat, sunglasses and sunblocking cream. Better not go outside between 10 ap and 4pm. Better not go outside. 31 Power on/off S1 Press button when the menu showsPOWER OFF S1to power it off. Press button when the menu showsPOWER ON S1to power it on. POWER OFF S1 Parameters Setting You can set the S1 parameters with the remote. E.g. video resolution, recording mode and so on. 32 Appendix Parameters Description Parameters Description 1920*1080 60fps 1920*1080 30fps 1280*720 120fps 1280*720 60fps 848*484 240fps Video Resolution Recording Mode In order: The camera indicator goes bsteady blue. And you cannot record or take photo when micro SD has no space. LoopingVideo and photo stored in the micro SD card are overwitten after SD card is full.
Restricted by the file system formate, a video size cannot be more than 4G, it will be seperated it is over Photo Resolution 4608*345616MP 3840*288012MP 3264*2448 8MP 2592*1944 5MP 33 Parameters Description Delay Capture Capture after a pre-defined time;
0.5SEC1SEC2SEC5SEC 10SEC30SEC60SEC Capture many photos in a certain Burst Capture time; E.g.5PCS/1S,10PCS/1S, 10PCS/2S,30PCS/1S,30PCS/2S Wi-Fi Turn on/ off Wi-Fi GPS Enabling the GPS function, the latitude and longitude data of the video or photo is contained. The longitude and latitude information can be viewed with subtitle for video and EXIF tool for photo) Enabling the G-sensor, S1 starts G-Sensor recording when senses acceleration and stops recording when motion stops for 20 seconds SD Card Storage Check SD card space and free space. Delete latest file or all files. 34 Parameters Description Set the remote into standby time. Remote Standby You can choose 120 seconds or cancel it. Version Info Check the information. 35 Restricted Substances and Elements Restricted substances and elements declaration
Parts Medal Lens Curciut Board Plastic Display Power
Controller Accesories
units are within the limit stipulated by the of the SJ/T11363-2006 standard. means the toxic and harmful substances in the assembly units exceed the limit stipulated by the SJ/T11363-2006 standard. 36 37