Handheld Thermal Monocular User Manual
. COPYRIGHT 2018 Hikvision. ALL RIGHTS RESERVED About This Manual COPYRIGHT 2018 Hangzhou Hikvision Digital Technology Co., Ltd. ALL RIGHTS RESERVED. Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be Hikvision). This user manual (hereinafter referred to be the Manual) cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of Hikvision. Unless otherwise stipulated, Hikvision does not make any warranties, guarantees or representations, express or implied, regarding to the Manual. This Manual is applicable to Handheld Thermal Monocular. The Manual includes instructions for using and managing the product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version in the company website
(http://overseas.hikvision.com/en/). Please use this user manual under the guidance of professionals. Trademarks Acknowledgement and other Hikvisions trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned below are the properties of their respective owners. Legal Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED AS IS, WITH ALL FAULTS AND ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS. Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation EU Conformity Statement This product and, if applicable, the supplied accessories are marked with CE and comply therefore with the applicable harmonized European standards listed under the Radio Equipment Directive 2014/53/EU, the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU. 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see:
www.recyclethis.info. 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info. Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformment la rglementation d'Industrie Canada, le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal
(ou infrieur) approuv pour l'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. WARNINGS AND CAUTIONS All the electronic operation should be strictly compliance with the electrical safety regulations, fire prevention regulations and other related regulations in your local region. Please use the power adapter, which is provided by normal company. The power consumption cannot be less than the required value. Do not connect several devices to one power adapter as adapter overload may cause over-heat or fire hazard. Do not drop the device or subject it to physical shock, and do not expose it to high electromagnetism radiation. Avoid the device installation on vibrations surface or places subject to shock (ignorance can cause equipment damage). Do not place the device in extremely hot (refer to the specification of the device for the detailed operating temperature), cold, dusty or damp locations, and do not expose it to high electromagnetic radiation. The device cover for indoor use should be kept from rain and moisture. Exposing the device to direct sun light, low ventilation or heat source such as heater or radiator is forbidden
(ignorance can cause fire danger). Do not aim the device at the sun or extra bright places. A blooming or smear may occur otherwise (which is not a malfunction however), and affecting the endurance of sensor at the same time. For long-term storage of the battery, make sure you fully charge it every half year, to ensure the battery quality. Otherwise, you may damage the battery. SAVE THIS MANUAL FOR FUTURE REFERENCE 1 Introduction 1.1 Box Content USB Cable
(1) Manual (1) Non-dust Cloth (1) Protective Bag (1) Handheld Thermal Monocular (1) Neck Belt(1) 1.2 Overview The handheld thermal monocular is a handheld thermal camera with functions of observation, hot spot mark, distance measurement, Wi-Fi hot spot, and so on. The high-sensitivity built-in IR detector provides you with clear view even in total darkness. 1.3 Features High performance chip, and DDE
(Digital Detail Enhancement) technique 1024 768 Resolution OLED display Built-in rechargeable Li-ion battery Up to five hours continuous running
(GPS function and Wi-Fi hot spot function off) USB Cable Small in size and light in weight 1.4 Functions Distance Measurement:
The device realizes distance measurement function after marking the top and bottom of target, and input the target height. Hot Spot Mark:
The device detects and marks the hot spot of highest temperature. Wi-Fi & Hot Spot:
Device can capture snapshots, record videos, and set parameters via APP after being connected to your phone. GPS Function:
The device can be located with GPS system. Mode Switch:
Device supports pallet switch and distance measurement. Storage:
Built-in memory module supports video recording/snapshot capturing. Digital Zoom:
Device supports 1 and 2 digital zoom. LED Light:
LED light supplement makes the device a torch in the wild field. Note: the function may not be supported by some camera models. 2 Appearance 2.1 Dimensions Take the figure below for the dimensions of the handheld thermal monocular. Note: the dimension varies according to different camera modes. 2.2 Buttons and Interfaces Take the figure below for the buttons and interfaces description of handheld thermal monocular. 1 Power MODE MOD Capture Menu Zoom Press: LED Light Supplement On/Off. The function may not be supported by some camera models Hold: Power On/Off Press: Switch Pallet Hold: Distance Measure On/Off Press: Capture Snapshot Hold: Start/Stop Record Video Press: Shutter Release Hold: Menu Operation Press: Digital Zoom Hold: Reserved Lens Cover LED Indicator Sight Adjust Knob USB Interface Cover the lens when you are not using the monocular. When the LED indicator is on:
the device is activating. Slide the sight adjust knob to adjust the view according to your degree of myopia. Charge the battery and export videos/snapshots with the USB cable. Note: For detailed operations of the menu, refer to Menu Operation Section. 3 Basic Operations 3.1 Charging the Monocular Note: Please charge the monocular with the delivered USB cable and power adapter. The charging temperature should be 0 C to 45 C (32 F to 113 F). Steps:
1. Lift the USB cover. 2. Plug in the USB cable and connect the other terminal into the power adapter. 3. Plug the power adapter to the power source. When the monocular is turned on, the OSD
(on-screen display) shows the battery status. When you see the Low Battery status, charge the monocular and ensure its working properly. Battery LED Indicator Status Red Flash Solid Red Solid Green Off Error occurred. Battery is properly charged. Battery is fully charged. Battery is not charged. 3.2 Power On and Off Power On Hold the POWER button for four seconds and the LED indicator in the front turns green. After the device is powered on, the indicator keeps green. Refer to the figure below for the main view of the monocular. Power Off When the monocular is turned on, hold the POWER button for four seconds to power off the device. 3.3 Thermal View Observation Steps:
1. Power on the monocular. 2. Hold the monocular and make sure the eyepiece covers your eye. 3. Slide the sight adjust knob to adjust the diopter until the OSD text or image is clear. Note: You must perform the sight adjustment before any further use of the monocular. 4. Point the monocular towards the target of the view. 3.4 Basic Operation Connect the thermal monocular to your PC with USB cable, you can export the recorded videos and captured snapshots. Steps:
1. Hold the button to enter the menu and select the icon
. 2. Press and the icon turns to and the Wi-Fi hot spot function is disabled. 3. Connect the thermal monocular to your PC with USB cable, you can see a detected removable disk. Notes:
When you connect the device to PC for the first time, it installs the drive program automatically. When you connect the device to PC, the device displays images, but functions such as recording, capturing and Wi-Fi hot spot are disabled. File Export Steps:
2. 1. Connect the thermal monocular to your PC with USB cable and open the detected disk. Enter DCIM>100EZVIZ to view the videos and snapshots.
-
Select and copy the videos to PC and play the file with the player. Select and copy the snapshots to PC and view the files.
-
3. Disconnect the device from your PC. Upgrade Steps:
1. Connect the thermal monocular to your PC with USB cable and open the detected disk. 2. Copy the upgrade file and paste it to the root directory of the device. 3. Disconnect the device from your PC. 4. Reboot the monocular and the device upgrades automatically. The upgrading process will be displayed in the main interface. 4 Main Function 4.1 Menu Operation When the monocular is turned on, hold the button for three seconds to display the OSD menu. Press the button press the button Press the button to move the cursor up, and to move the cursor down. to confirm. Press information. to display or hide the OSD Press to enable/disable hot spot mark (marking the spot of highest temperature). Press to enable or disable the Wi-Fi and hot spot. Connect your phone to the monocular via the Wi-Fi or hot spot and record/capture with App. Press to enter distance measu rement mode. For details, refer to Section 4.2 Distance Measurement. Press to enable or disable the GPS function. Press to adjust the brightness. The icons on the left indicate: high Brightness, medium Brightness, and low Brightness. Press ber and serial number. to view the version num Press to default settings. to restore all parameters Palette Settings Under the same scene, you can select different palettes to see the scene in different effects. White Hot:
The hot part is light-colored in view. Black Hot:
The hot part is black-colored in view. Fusion:
The hot part is yellow-colo red and cold part is purple
-colored in view. Red Hot:
The hot part is red-colored in view. Brightness Adjusting In white hot mode, you can adjust the brightness as to adjust the image darker and darker.
>
>
In black hot mode, the brightness of the image turns in the opposite way. 4.2 Distance Measurement button to enter to enter the Before you start:
In the view mode, you can hold the button to enter the distance measurement mode. Or, you can hold the the menu and select distance measurement mode. Purpose:
You can mark the top and bottom of the target in the distance to calculate the distance in between. Steps:
1. Enter the distance measurement mode. You can refer to Before you start part above. 2. Define the target height. a) b) c) d) e) and to select to enter the height Press setting interface. Press the target from Deer, Wolf, Bear, and Custom. Press Press the target height. Press to confirm. and to confirm. to select 3. Set the top of the target. a) Move the monocular slightly to mark above the place the target top. Press b) to confirm. 4. Set the bottom of the target. a) Move the monocular slightly to mark below the place the target bottom. Press to confirm. b) The distance between you and the target will display on the upper left corner of the live view interface. Note: Enter the distance measurement interface, press view the measured distance. to 4.3 Hot Spot Mark In the menu, select to enable/disable hot spot mark (marking the spot of highest temperature). When the hot spot mark is enabled, the mark displays in the spot of the highest temperature. When the scene changes, the and press
/
mark moves. 4.4 Record/Capture Video Recording In the view mode, hold the button for three seconds, and the monocular starts to record. In the upper left corner, the recording time displays. After recording the video, hold the button for three seconds again, and the monocular stops recording. Snapshot Capturing In the view mode, press the live view freezes for one second, and the snapshot is captured. button, the 4.5 Digital Zoom button in the view mode, the Press the live view will switch between 1 digital zoom and 2 digital zoom. 4.6 Shutter Release In the view mode, press the button once to release the shutter once. 4.7 Network Configuration Connect your phone to the Wi-Fi or hot spot of the monocular, you can configure the parameters and realize functions of the device. Wi-Fi Steps:
1. Hold the button to show the menu of monocular. 2. Press the function. key to enable Wi-Fi 3. Setting the Wi-Fi name and password of your phone or the router as follow:
- Wi-Fi Name: WLAN-IPTP.
- Wi-Fi Password: abcd1234. 4. Search the IVMS-4500 on App Store
(iOS System) or Google Play TM
(Android System) to download and install the app. 5. Open the APP and connect your phone with the device. You can view the interface of monocular on your phone. Hot Spot Steps:
1. Hold the button to show the menu of monocular. 2. Press the function. key to enable hot spot 3. Turn on the WLAN and connect to the hot spot.
-
-
Hot Spot Name: HIK-IPTS Serial No. Hot Spot Password: S + serial No. 4. Search the IVMS-4500 on App Store
(iOS System) or Google Play TM
(Android System) to download and install the app. 5. Open the APP and connect your phone with the device. You can view the interface of monocular on your phone. 4.8 Others LED Light Supplement Press the LED light supplement. button to enable/disable the Note: the function may not be supported by some camera models. 5 FAQ Q:
A:
Q:
A:
Q:
A:
The charge indicator flashes improperly. Examine whether the device is charged with standard power adapter and the charging temperature is 0 C to 45 C (32 F to 113 F). Device power indicator is off. Examine whether the device is off-battery. The image of the monocular is not clear. Perform the sight adjustment referring to section 3.3. Q: Wi-Fi is not found. A:
Examine whether the Wi-Fi function is turned on. If not, go to OSD menu and turn on Wi-Fi. Capturing or recording fails. Examine the items below:
Q:
A:
1. Whether the device is connected to your PC and disabled the capturing and recording. 2. Whether the storage space is full. 3. Whether the device is low-battery. Q:
A:
There is no GPS signal. Examine the using environment. If the device receives no signal in indoor environment, please go to outdoor spaces. It takes about 10 min to power on and search for the signal. The PC cannot identify the monocular. Examine the items below:
A:
1. Whether the device is connected to Q:
2. your PC with standard USB cable. If you use other USB cables, make sure the cable length is no longer than 1m. 3. Whether the Wi-Fi function is turned on. If so, go to OSD menu and turn off Wi-Fi. UD10635B 0504001080711