FCC ID: 2ADTD-TDM Touch Display Module

Video Intercom Module Door Station User Manual Video Intercom Module Door Station User Manual Legal Information 2021 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website ( https://www.hikvision.com/ ). Please use this Manual with the guidance and assistance of professionals trained in supporting the Product. Trademarks and other Hikvision's trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned are the properties of their respective owners. Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED "AS IS" AND "WITH ALL FAULTS AND ERRORS". HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN i Video Intercom Module Door Station User Manual CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS. ii Video Intercom Module Door Station User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Danger Caution Note Indicates a hazardous situation which, if not avoided, will or could result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results. Provides additional information to emphasize or supplement important points of the main text. iii Video Intercom Module Door Station User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. iv Video Intercom Module Door Station User Manual EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see:www.recyclethis.info Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements. v Video Intercom Module Door Station User Manual Contents 1 Appearance ................................................................................................ 1 2 Terminal and Wiring ................................................................................... 8 2.1 Terminal Description ......................................................................................... 8 2.2 Module Door Station Wiring ........................................................................... 12 2.2.1 Door Lock Wiring .................................................................................... 12 2.2.2 Door Contact Wiring ............................................................................... 12 2.2.3 Exit Button Wiring .................................................................................. 13 2.2.4 RS-485 Card Reader Wiring .................................................................... 14 3 Installation ................................................................................................ 15 3.1 Configure Sub Module Address ....................................................................... 15 3.2 One-Module Installation ................................................................................. 16 3.2.1 One-Module Surface Mounting .............................................................. 16 3.2.2 One-Module Flush Mounting ................................................................. 19 3.3 Two-Module Installation ................................................................................. 23 3.3.1 Two-Module Surface Mounting .............................................................. 23 3.3.2 Two-Module Flush Mounting ................................................................. 28 3.4 Three-Module Installation .............................................................................. 32 3.4.1 Three-Module Surface Installation ......................................................... 32 3.4.2 Three-Module Flush Mounting ............................................................... 36 3.5 More-Than-Three Module Installation ............................................................ 40 3.5.1 More-than-Three Module Surface Mounting ......................................... 40 3.5.2 More-Than-Three Module Flush Mounting ............................................ 46 vi Video Intercom Module Door Station User Manual 4 Activation ................................................................................................. 54 4.1 Activate Device via Client Software ................................................................. 54 4.2 Edit Network Parameters ................................................................................ 54 5 Configuration via Client Software ............................................................. 56 5.1 Device Management ....................................................................................... 56 5.1.1 Add Online Device .................................................................................. 56 5.1.2 Add Device by IP Address ....................................................................... 57 5.1.3 Add Device by IP Segment ...................................................................... 57 5.2 Live View via Door Station .............................................................................. 58 5.3 Remote Configuration ..................................................................................... 58 5.3.1 Device Management .............................................................................. 58 5.3.2 Local Parameters Settings ....................................................................... 60 5.3.3 System Settings ....................................................................................... 61 5.3.4 Network Settings .................................................................................... 65 5.3.5 Video & Audio Settings ........................................................................... 69 5.3.6 Image Settings ........................................................................................ 71 5.3.7 Schedule Settings .................................................................................... 73 5.3.8 Intercom Settings .................................................................................... 75 5.3.9 Access Control Settings ........................................................................... 80 5.3.10 Theme Settings ..................................................................................... 84 5.4 Organization Management ............................................................................. 84 5.4.1 Add Organization .................................................................................... 84 5.4.2 Modify and Delete Organization ............................................................. 85 5.5 Person Management ....................................................................................... 85 vii Video Intercom Module Door Station User Manual 5.5.1 Add Person ............................................................................................. 85 5.5.2 Modify and Delete Person ...................................................................... 87 5.5.3 Import and Export Person Information .................................................. 87 5.5.4 Get Person Information from Device ...................................................... 88 5.5.5 Change Person to Other Organization .................................................... 88 5.5.6 Issue Card in Batch ................................................................................. 89 5.5.7 Permission Settings ................................................................................. 90 6 Video Intercom Operation ........................................................................ 92 6.1 Video Intercom Operation via Device ............................................................. 92 6.1.1 Call Resident ........................................................................................... 92 6.1.2 Issue Card ............................................................................................... 93 6.1.3 Unlock Door ............................................................................................ 93 6.2 Video Intercom Operation via Client Software ............................................... 94 6.2.1 Receive Call from Door Station ............................................................... 95 6.2.2 Live View via Door Station ...................................................................... 96 6.2.3 View Call Logs ......................................................................................... 96 6.2.4 Search Video Intercom Information ....................................................... 97 A. Communication Matrix and Device Command ..................................... 101 viii Video Intercom Module Door Station User Manual 1 Appearance Main Unit No. 1 2 3 4 5 6 7 8 9 10 Figure 1-1 Main Unit Appearance Table 1-1 Appearance Description Description Microphone Low Illumination IR Supplement Light Built-in Camera Loudspeaker Call Button Nametag TAMPER Network Interface Module-Connecting Interface (output) Terminals 1 Video Intercom Module Door Station User Manual Note Nametag area supports insert customized name card. The suggested card size is: 58 (L) x 11.7(W) mm. The module connecting interface is used to connect other function module, such as nametag module, keypad module, card reader module, etc. All these modules are known as sub module. Two-Wire Main Unit No. 1 2 3 4 5 6 7 8 9 10 Figure 1-2 Two-Wire Main Unit Table 1-2 Appearance Description Description Microphone Low Illumination IR Supplement Light Built-in Camera Loudspeaker Call Button Nametag TAMPER Two-Wire Interface Module-Connecting Interface (output) Terminals 2 Video Intercom Module Door Station User Manual Note Nametag area supports insert customized name card. The suggested card size is: 58 (L) x 11.7(W) mm. The module connecting interface is used to connect other function module, such as nametag module, keypad module, card reader module, etc. All these modules are known as sub module. Nametag Module Figure 1-3 Nametag Module Appearance Table 1-3 Appearance Description Description Call Button Nametag Module-Connecting Interface (output) Module-Connecting Interface (input) Debugging Port No. 1 2 3 4 5 3 Video Intercom Module Door Station User Manual Keypad Module Figure 1-4 Keypad Module Appearance Table 1-4 Appearance Description Description Button Module-Connecting Interface (output) Module-Connecting Interface (input) Debugging Port No. 1 2 3 4 Indicator Module Figure 1-5 Indicator Module 4 Video Intercom Module Door Station User Manual Table 1-5 Appearance Description Description Calling Indicator Two-way Audio Indicator Unlock Indicator Module-connecting Interface (output) Module-connecting Interface(input) Debugging Port No. 1 2 3 4 5 6 Card Reader Module Figure 1-6 Card Reader Module Table 1-6 Appearance Description Description Card Reading Area Module-connecting Interface (output) Module-connecting Interface(input) Debugging Port No. 1 2 3 4 5 Video Intercom Module Door Station User Manual Display Module Figure 1-7 Display Module Table 1-7 Description No. Description No. Description 1 2 3 4 Screen Up Button Down Button Confirm Button Information Module 5 6 7 8 Back Button Module-connecting Interface (output) Module-connecting Interface (input) Debug Port Figure 1-8 Information Module 6 Video Intercom Module Door Station User Manual Table 1-8 Description Description Display Area Module-connecting Interface (output) Module-connecting Interface (input) Debugging Port No. 1 2 3 4 Touch-Display Module Figure 1-9 Touch-Display Module Table 1-9 Description Description Touch-Display Area TF Card Slot Module-connecting Interface (output) Module-connecting Interface (input) Video & Audio Terminal Debugging Port No. 1 2 3 4 5 6 Note The debugging port is used for debugging only. 7 Video Intercom Module Door Station User Manual 2 Terminal and Wiring 2.1 Terminal Description Main Unit Terminals Figure 2-1 Main Unit Terminals Table 2-1 Descriptions of Terminals and Interfaces No. Interface Description A1 A2 A3 A4 A5 A6 A7 A8 B1 B2 B3 NC1 NO1 COM NC2 NO2 GND 12 VDC GND AIN2 AIN1 AIN3 Door Lock Relay Output (NC) Door Lock Relay Output (NO) Common Interface Door Lock Relay Output (NC) Door Lock Relay Output (NO) Grounding Power Input Grounding For the access of Door Magnetic 2 For the access of Door Magnetic 1 For the access of Exit Button 1 8 Video Intercom Module Door Station User Manual No. Interface Description B4 B5 B6 B7 B8 C AIN4 485-

485+

12 V OUT GND LAN Two-Wire Main Unit Terminal For the access of Exit Button 2 Module-connecting Interface PoE Network Interface(Supports IEEE 802.3af/at-Compliant Devices) Figure 2-2 Two-Wire Main Unit Terminal Table 2-2 Descriptions of Terminals and Interfaces No. Interface Description A1 A2 A3 A4 A5 A6 A7 NC1 NO1 COM NC2 NO2 GND 12 VDC Door Lock Relay Output (NC) Door Lock Relay Output (NO) Common Interface Door Lock Relay Output (NC) Door Lock Relay Output (NO) Grounding Reserved 9 Video Intercom Module Door Station User Manual No. Interface Description Grounding For the access of Door Magnetic 2 For the access of Door Magnetic 1 For the access of Exit Button 1 For the access of Exit Button 2 Module-connecting Interface A8 B1 B2 B3 B4 B5 B6 B7 B8 C GND AIN2 AIN1 AIN3 AIN4 485-

485+

12 V OUT GND Two-Wire Interface Two-Wire Interface Sub Module Terminal (Except Touch-Display Module) Figure 2-3 Sub Module Terminal (Except Touch-Display Module) Table 2-3 Description Interface Description Module-Connecting Interface (Input) 485-

485+

12V IN GND No. A1 A2 A3 A4 10 Video Intercom Module Door Station User Manual Interface Description Module-Connecting Interface (Output) 485-

485+

12V OUT GND No. B1 B2 B3 B4 Touch-Display Module Figure 2-4 Touch-Display Module Table 2-4 Description No. Interface Description A1 A2 A3 A4 B1 B2 B3 B4 C1 485-

485+

12V IN GND 485-

485+

12V OUT GND GND Module-Connecting Interface (Input) Module-Connecting Interface (Output) Grounding Interface 11 Video Intercom Module Door Station User Manual Interface Description CVSB IN Composite Video Broadcast Signal Input

(Reserved) LINEOUT-

Audio Output (Reserved) LINEOUT+

No. C2 C3 C4 2.2 Module Door Station Wiring 2.2.1 Door Lock Wiring Figure 2-5 Door Lock Wiring Note Terminal NC1/COM is set as default for accessing magnetic lock/electric bolt;

terminal NO2/COM is set as default for accessing electric strike. 2.2.2 Door Contact Wiring 12 Video Intercom Module Door Station User Manual Figure 2-6 Door Contact Wiring Note AIN1 and AIN2 are defaulted to connect door contact. Door contact connected to AIN1 detects status of the lock that connected to NC1/NO1; Door contact connected to AIN2 detects the status of the lock connected to NC2/NO2. 2.2.3 Exit Button Wiring Figure 2-7 Exit Button Wiring 13 Video Intercom Module Door Station User Manual Note AIN3 and AIN4 are set as default for connecting exit button. Exit button connected to AIN3 opens the lock connected to NC1/NO1; Exit button connected to AIN4 controls the lock that connected to NC2/NO2. 2.2.4 RS-485 Card Reader Wiring To connect RS-485 card reader, refer to the picture below. Figure 2-8 RS-485 Card Reader Wiring 14 Video Intercom Module Door Station User Manual 3 Installation Note Make sure the device in the package is in good condition and all the assembly parts are included. Sub module must work along with the main unit. Set the sub module address before start the installation steps. Make sure the place for surface mounting is flat. Make sure all the related equipment is power-off during the installation. Tools that you need to prepare for installation:

Drill (6), cross screwdriver (PH1*150 mm), and gradienter. 3.1 Configure Sub Module Address You need to set the sub module address via DIP switch before installation. Steps 1. Remove the rubber cover on the rear panel of the sub module to expose the DIP switch. Figure 3-1 DIP Switch 2. Set the sub module address according to the DIP rules, and install the rubber cover back. 15 Video Intercom Module Door Station User Manual Note Bit 1, 2, 3, 4 are used to coding the sub module address. Bit 5, 6, 7 are reserved. Set Bit 8 as on to enable a resistance (120). Valid sub module address is from 1 to 8. The address should be unique for connecting to the main unit. The sub module address and its corresponding switch status are displayed as below. Table 3-1 Description Sub Module Address Bit 1 Bit 2 Bit 3 Bit 4 1 2 3 4 5 6 7 8 ON OFF OFF OFF OFF ON OFF OFF ON ON OFF OFF OFF OFF ON ON OFF ON OFF ON ON ON ON ON OFF OFF OFF OFF OFF OFF OFF ON 3.2 One-Module Installation 3.2.1 One-Module Surface Mounting 16 Video Intercom Module Door Station User Manual Before You Start Figure 3-2 Mounting Frame Note The dimension of one module mounting frame (W H D) is: 117 mm 107 mm 32.7 mm. The dimensions above are for reference only. The actual size can be slightly different from the theoretical dimension. Steps 1. Paste the installation Sticker 1 onto the wall. Make sure the sticker is placed horizontally via measuring with the gradienter. 2. Drill 4 holes according to the screw holes on the sticker. Note The suggested size of hole is 6 (diameter) 25 (depth) mm. The suggested length of cables left outside is 100 mm. 17 Video Intercom Module Door Station User Manual Figure 3-3 Drill Screw Holes 3. Remove the stricker and insert the expansion sleeves into the screw holes. 4. Fix the mounting frame onto the wall with 4 expansion bolts. Figure 3-4 Fix the Mounting Frame 18 Video Intercom Module Door Station User Manual 5. Connect the cables to the corresponding interfaces of the main unit and insert the main unit into the frame. 6. Fix the cover onto the frame. Figure 3-5 Insert the Main Unit Figure 3-6 Fix the Cover 3.2.2 One-Module Flush Mounting 19 Video Intercom Module Door Station User Manual Before You Start Figure 3-7 Front and Side View of the Gang Box Figure 3-8 Gang Box Note The dimension of one-module gang box is: 115 (W) 134 (H) 56 (D) mm. The dimension is for reference only. 20 Video Intercom Module Door Station User Manual Steps 1. Drill an installation hole, and pull the cables out. Note The suggested dimension of installation hole is 118 (W) 108 (H) 45.5 (D) mm. The suggested length of cables left outside is 100 mm. Figure 3-9 Drill Installation Hole 2. Remove the plastic sheet of the cable entry. 3. Mark the gang box screw holes on the wall. 1) Route the cables through the gang box hole. 2) Insert the gang box into the installation hole. 3) Mark the gang box screw holes' position with a marker, and take out the gang box. Figure 3-10 Mark the Screw Holes 21 Video Intercom Module Door Station User Manual 4. Drill 4 holes according to marks on the wall, and insert the expansion sleeves into the screw holes. Note The suggested size of the hole is 6 (diameter) 45 (depth) mm. 5. Route the cables through the gang box hole. Insert the gang box into the installation hole. Fix the gang box with 4 expansion bolts. Figure 3-11 Fix the Gang Box 6. Fill the gap between the gang box and the wall with concrete. Remove the 4 mounting ears with tool after concrete is dry. Figure 3-12 Remove the Mounting Ears 22 Video Intercom Module Door Station User Manual 7. Connect the cables to the corresponding interfaces of the main unit and insert the unit into the gang box. Figure 3-13 Insert the Main Unit 8. Fix the cover and the main unit with 2 socket head cap screws by using a hexagon wrench (supplied). Figure 3-14 Fix the Cover 3.3 Two-Module Installation 3.3.1 Two-Module Surface Mounting 23 Video Intercom Module Door Station User Manual Before You Start Figure 3-15 Mounting Frame Note The dimension of two-module mounting frame (W H D) is: 219 mm 107 mm 32.7 mm. The dimensions above are for reference only. The actual size can be slightly different from the theoretical dimension. Steps 1. Paste the installation Sticker 1 onto the wall. Make sure the sticker is placed horizontally via measuring with the gradienter. 2. Drill 4 holes according to the screw holes on the sticker. The suggested size of hole is 6 (diameter) 25 (depth) mm. The suggested length of cables left outside is 270 mm. 24 Video Intercom Module Door Station User Manual Figure 3-16 Drill Screw Holes 3. Remove the sticker and insert the expansion sleeves into the screw holes. 4. Fix the mounting frame onto the wall with 4 expansion bolts. Figure 3-17 Fix the Mounting Frame 5. Thread the module-connecting line across the thread hole of the frame. Pass the main unit connecting lines across the thread hole to the upper grid. 25 Video Intercom Module Door Station User Manual 6. Connect the cables. Figure 3-18 Placement of Lines 1) Connect the lines and module-connecting line to the corresponding interfaces of the main unit, then place the main unit into the upper grid. 2) Connect the other end of the module-connecting line to the input interface of the sub module. 3) Organize the cable with cable tie in the package. The suggested cable connection picture as shown below. 26 Video Intercom Module Door Station User Manual Figure 3-19 Line Connection Effect Picture 7. Insert the modules into the frame after wiring. The main unit must be placed in the top grid. 8. Use the hexagon wrench in the package to fix the cover onto the frame. Figure 3-20 Insert the Modules 27 Video Intercom Module Door Station User Manual Figure 3-21 Fix the Cover 3.3.2 Two-Module Flush Mounting Before You Start Figure 3-22 Gang Box 28 Video Intercom Module Door Station User Manual Note The dimension of two-module gang box is: 237 (W) 134 (H) 56 (D) mm. The dimension is for reference only. Steps 1. Drill the installation hole, and pull the cable out. Note The suggested dimension of installation hole is 220 (W) 108 (H) 45.5 (D) mm. The suggested length of cables left outside is 270 mm. Figure 3-23 Drill the Installation Hole 2. Select a cable entry and remove the plastic sheet. 3. Mark the gang box screw holes on the hole. 1) Routs the cables through the gang box hole. 2) Insert the gang box into the installation hole. 3) Mark the gang box screw holes' position with a marker, and take out the gang box. 29 Video Intercom Module Door Station User Manual Figure 3-24 Mark the Screw Holes 4. Drill 4 holes according to the marks on the wall, and insert the expansion sleeves into the screw holes. The suggested size of hole is 6 (diameter) 45 (depth) mm. 5. Fix the gang box with 4 expansion bolts. Figure 3-25 Fix the Gang Box 6. Fill the gap between the gang box and the wall with concrete. Remove the mounting ears with tool after concrete is dry. 30 Video Intercom Module Door Station User Manual Figure 3-26 Remove the Mounting Ears 7. Connect cables and insert the modules. 1) Connect Cable 1 and one end of Cable 2 to the corresponding interfaces of the main unit, then insert the main unit into the upper grid. 2) Connect the other end of Cable 2 to the input interface of the sub module. Insert it into the lower grid. Figure 3-27 Connect Cables and Insert the Modules 31 Video Intercom Module Door Station User Manual Note Cable 1 refers to the cables pulled out from the wall that connected to the main unit. Cable 2 refers to the module-connecting line in the accessory package. 8. Fix the cover with 2 socket head cap screws by using a hexagon wrench

(supplied). Figure 3-28 Fix the Cover 3.4 Three-Module Installation 3.4.1 Three-Module Surface Installation Before You Start Figure 3-29 Mounting Frame 32 Video Intercom Module Door Station User Manual Note The dimension of two-module mounting frame (W H D) is: 320.8 mm 107 mm 32.7 mm. The dimensions above are for reference only. The actual size can be slightly different from the theoretical dimension. Steps 1. Paste the installation sticker 1 onto the wall. Make sure the sticker is placed horizontally via measuring with the gradienter. 2. Drill 4 holes according to the screw holes on the sticker.The suggested size of hole is 6 (diameter) 25 (depth) mm. The suggested length of cables left outside is 270 mm. Figure 3-30 Drill Screw Holes 3. Remove the sticker and insert the expansion sleeves into the screw holes. 4. Fix the mounting frame onto the wall with 4 expansion bolts. 33 Video Intercom Module Door Station User Manual Figure 3-31 Fix the Mounting Frame Note The mounting frame should be placed exactly as shown below for this step. The tamper plate should be at the low right of the first grid. Figure 3-32 Mounting Frame 5. Thread the module-connecting line across the thread holes of the frame. Pass the main unit connecting line across the thread hole to the top grid. 34 Video Intercom Module Door Station User Manual 6. Connect the cables. Figure 3-33 Placement of Lines 1) Connect the lines and module-connecting line 1 to the corresponding interfaces of the main unit, then place the main unit into the upper grid. 2) Connect the other end of the module-connecting line 1 to the input interface of the sub module. Connect two sub modules via module-connecting line 2. 3) Organize the cables with cable tie in the package. The suggested cable connection picture as shown below. Figure 3-34 Line Connection Effect Picture 7. Insert the modules into the frame after wiring. The main unit must be placed in the top grid. 35 Video Intercom Module Door Station User Manual Figure 3-35 Insert the Modules into the Frame 8. Use the hexagon wrench in the package to fix the cover onto the frame. Figure 3-36 Fix the Cover 3.4.2 Three-Module Flush Mounting 36 Video Intercom Module Door Station User Manual Before You Start Figure 3-37 Gang Box Note The dimension of one-module gang box is: 338.8(W)134(H)56(D) mm. The dimensions above are for reference only. The actual size can be slightly different from the theoretical dimension. Steps 1. Cave the installation hole, and pull the cable out.The suggested dimension of installation hole is 321.8(W)108(H)45.5(D) mm. The suggested length of cables left outside is 270 mm. 37 Video Intercom Module Door Station User Manual Figure 3-38 Cave the Installation Hole 2. Select a cable entry and remove the plastic sheet. 3. Mark the gang box screw holes on the wall. 1) Route the cables through the gang box hole. 2) Insert the gang box into the installation hole. 3) Mark the gang box screw holes' position with a marker, and take out the gang box. Figure 3-39 Mark the Screw Holes 4. Drill 4 holes according to marks on the wall, and insert the expansion sleeves into the screw holes. The suggested size of hole is 6 (diameter) 45 (depth) mm. 5. Fix the gang box with 4 expansion bolts. 38 Video Intercom Module Door Station User Manual Figure 3-40 Fix the Gang Box 6. Fill the gap between the gang box and wall with concrete. Remove the mounting ears with tool after concrete is dry. Figure 3-41 Remove the Mounting Ears 7. Connect cables and insert the modules. 1) Connect Cable 1 and one end of Cable 2 to the corresponding interfaces of the main unit, then insert the main unit into the upper grid. 2) Connect the other end of Cable 2 to the input interface of Sub Module 1. Connect one end of Cable 3 to the output interface of Sub Module 1 and insert it into the middle grid. 3) Connect the other end of Cable 3 to the input interface of Sub Module 2. Insert it into the bottom grid. 39 Video Intercom Module Door Station User Manual Figure 3-42 Connect Cables and Insert Modules Note Cable 1 refers to the cables pulled out from the wall that connected to the main unit. Cable 2 and Cable 3 refer to the module-connecting line in the accessory package. 8. Fix the cover and the main unit with 2 socket head cap screws by using a hexagon wrench (supplied). Figure 3-43 Fix the Cover 3.5 More-Than-Three Module Installation 3.5.1 More-than-Three Module Surface Mounting 40 Video Intercom Module Door Station User Manual Before You Start Figure 3-44 Mounting Frame Note It takes two three-module mounting frames. The dimension of three-module mounting frame (W H D) is: 320.8 mm 107 mm 32.7 mm. The dimensions above are for reference only. The actual size can be slightly different from the theoretical dimension. Steps 1. Paste two Sticker 1 onto the wall. Make sure the stickers are placed horizontally via measuring with the gradienter. 2. Drill 8 holes according to the screw holes on the sticker. Note The suggested size of hole is 6 (diameter) 25 (depth) mm. The suggested length of cables left outside is 270 mm. 3. Pull out the cable through the cable hole of the left sticker. 41 Video Intercom Module Door Station User Manual Figure 3-45 Drill Screw Holes 4. Remove the stickers and insert the expansion sleeves into the screw holes. 5. Thread the module-connecting line (400 mm) and grounding line across the thread hole of both frames. Figure 3-46 Place the Grounding Line and Module-Connecting Line 42 Video Intercom Module Door Station User Manual Note There are 6 module-connecting lines in the package: 190 mm 4 and 400 mm 2. Take the 400 mm module-connecting line for this step. The green-yellow line in the package is for grounding. 6. Fix the mounting frame onto the wall with 8 expansion bolts. Figure 3-47 Fix the Mounting Frame 7. Pass the main unit connecting line across the thread hole to the top grid of the left frame. Thread the module-connecting line (190 mm) across the thread hole of the frame. The lines should be placed as shown below. 8. Connect the cables. Figure 3-48 Placement of Lines 43 Video Intercom Module Door Station User Manual 1) Connect the cables from the wall and module-connecting line 1 to the corresponding interfaces of the main unit, then place the main unit into the upper grid. 2) Connect the other end of the module-connecting line 1 to the input interface of the sub module. Connect all sub modules via module-connecting lines. 3) Organize the cable with cable tie in the package. The suggested cable connection picture as shown below. Figure 3-49 Line Connection Effect Picture 9. Insert the modules into the frame after wiring. The main unit must be placed in the top grid on the left. 44 Video Intercom Module Door Station User Manual 10. Pull the grounding line out and fixed its two end to the screw on the cover. Figure 3-50 Insert the Modules Figure 3-51 Connect the Grounding Line to the Cover 11. Use the hexagon wrench in the package to fix the cover onto the frame. 45 Video Intercom Module Door Station User Manual Figure 3-52 Fix the Cover 3.5.2 More-Than-Three Module Flush Mounting 46 Video Intercom Module Door Station User Manual Before You Start Figure 3-53 Gang Box Note It takes two three-module gang boxes. The dimension of the gang box is: 338.8 (W) 134 (H) 56 (D) mm. The dimension is for reference only. 47 Video Intercom Module Door Station User Manual Steps 1. Drill the installation hole, and pull the cable out.The suggested dimension of installation hole is 321.8 (W) 315 (H) 45.5 (D) mm. The suggested length of cables left outside is 270 mm. Figure 3-54 Cave the Installation Hole 2. Connect two gang boxes as below. 3. Select a cable entry and remove the plastic sheet. Figure 3-55 Connect Two Gang Boxes 48 Video Intercom Module Door Station User Manual 4. Remove the plastic sheets on the side of the gang boxes (shown as 1 and 2) below:

Figure 3-56 Remove the Plastic Sheets 5. Mark the gang box screw holes on the wall. 1) Route the cables through the gang box hole. 2) Insert the gang box into the installation hole. 3) Mark the gang box screw holes' position with a marker, and take out the gang box. Figure 3-57 Mark the Screw Holes 49 Video Intercom Module Door Station User Manual 6. Drill 8 holes according to the marks on the wall, and insert the expansion sleeves into the screw holes. The suggested size of hole is 6 (diameter) 45 (depth) mm. 7. Fix the gang boxes with 8 expansion bolts. Figure 3-58 Fix the Gang Boxes 8. Fill the gap between the gang box and wall with concrete. Remove the mounting ears with tool after concrete is dry. Route the grounding line through the cable entries. Figure 3-59 Remove the Mounting Ears Note The green-yellow line in the package is for grounding. 9. Connect cables and insert the modules. 50 Video Intercom Module Door Station User Manual 1) Connect Cable 1 and one end of Cable 2 to the corresponding interfaces of the Main Unit, then place the Main Unit into the upper grid of the left gang box. 2) Connect the other end of Cable 2 to the input interface of Sub Module 1. Connect one end of Cable 3 to the output interface of Sub Module 1 and insert it into the middle grid of the left gang box. 3) Finish the wiring and inserting according to the cable number and the position shown as below. Figure 3-60 Install Mounting Frame The cables connect to each module shown as below. Figure 3-61 Cables Connection 51 Video Intercom Module Door Station User Manual Note Cable 2,3,5 and 6 are the module-connecting lines (190 mm) in the package. Cable 4 is the module-connecting line (400 mm) in the package. Main unit must be put in the top grid. 10. Pull the grounding line out and fixed its two end to the screw on the cover. Figure 3-62 Connect the Grounding Line to the Cover 11. Fix the cover with 2 socket head cap screws by using a hexagon wrench

(supplied). 52 Video Intercom Module Door Station User Manual Figure 3-63 Fix the Cover 53 Video Intercom Module Door Station User Manual 4 Activation 4.1 Activate Device via Client Software You can only configure and operate the door station after creating a password for the device activation. Default parameters of door station are as follows:

Default IP Address: 192.0.0.65. Default Port No.: 8000. Default User Name: admin. Steps 1. Run the client software, click Maintenance and Management Device Management Device to enter the page. 2. Click Online Device. 3. Select an inactivated device and click Activate. 4. Create a password, and confirm the password. Note We highly recommend you to create a strong password of your own choosing

(using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product. 5. Click OK to activate the device. Note When the device is not activated, the basic operation and remote operation of device cannot be performed. You can hold the Ctrl or Shift key to select multiple devices in the online devices, and click the Activate button to activate devices in batch. 4.2 Edit Network Parameters 54 Video Intercom Module Door Station User Manual To operate and configure the device via LAN (Local Area Network), you need connect the device in the same subnet with your PC. You can edit network parameters via iVMS-4200 client software. Steps 1. Select an online activated device and click the Modify Netinfo. 2. Edit the device IP address and gateway address to the same subnet with your computer. 3. Enter the password and click OK to save the network parameters modification. Note The default port No. is 8000. The default IP address of the door station is 192.0.0.65. After editing the network parameters of device, you should add the devices to the device list again. 55 Video Intercom Module Door Station User Manual 5 Configuration via Client Software 5.1 Device Management Device management includes device activation, adding device, editing device, and deleting device, and so on. After running the iVMS-4200, video intercom devices should be added to the client software for remote configuration and management. 5.1.1 Add Online Device Before You Start Make sure the device to be added is in the same subnet with your computer. Otherwise, please edit network parameters first. Steps 1. Click Online Device to select an active online device. 2. Click Add. 3. Enter corresponding information, and click Add. 56 Video Intercom Module Door Station User Manual Figure 5-1 Add to the Client 5.1.2 Add Device by IP Address Steps 1. Click +Add to pop up the adding devices dialog box. 2. Select IP/Domain as Adding Mode. 3. Enter corresponding information. 4. Click Add. 5.1.3 Add Device by IP Segment 57 Video Intercom Module Door Station User Manual You can add many devices at once whose IP addresses are among the IP segment. Steps 1. Click +Add to pop up the dialog box. 2. Select IP Segment as Adding Mode. 3. Enter corresponding information, and click Add. 5.2 Live View via Door Station Steps 1. On the main page of the client software, click Main View to enter the Live View page. 2. In the left list of the window, double-click the device IP or click the play icon to live view. 3. Optional: On the Live View page, control-click and select Capture to get the picture of the live view. 5.3 Remote Configuration Click to set the parameters of the device. Note Run the browser, click Mode. Internet Options Security to disable the Protected 5.3.1 Device Management You can manage the linked device on the page. Click Device Management to enter the settings page. 58 Video Intercom Module Door Station User Manual Figure 5-2 Device Management Add Device Click Add to add the indoor station or sub door station. Enter the parameters and click OK to add. Click Import. Enter the information of the device in the template to import devices in batch. Export Click Export to export the information to the PC. Delete Select the device and click Delete to remove the selected device from the list. Synchronize Click Synchronize, enable Synchronize, and click OK to synchronize the device list. Upgrade Upgrade Automatically Click Timing Upgrade to pop-up the settings dialog. Enable upgrading device automatically. Edit the start time and end time and click OK to save the settings. The upgrading will start at the set time automatically. 59 Video Intercom Module Door Station User Manual Upgrade Manually Click Upload Upgrading Package to import the upgrading package. Click Upgrade Now to start upgrading. View Version Put the mouse on the Upgrading button to view the upgrading version and time. Optional: Set Device Information. Click Click to edit device information. to delete device information from the list. Select Status and Device Type to search devices. 5.3.2 Local Parameters Settings You can configure the parameters of the live view, record files and captured pictures. The record files and captured pictures are the ones you record and capture by using the web browser. You can also set and view the saving paths of the captured pictures and recorded videos on the PC that running the web browser. Figure 5-3 Local Parameters Live View Parameters Stream Type 60 Video Intercom Module Door Station User Manual Set the stream type as Main Stream or Sub-stream. Play Performance Set the live view performance to Shortest Delay, Balanced or Fluent. Auto Start Live View Check Yes to enable the function. Image Format Select the image format for picture capture. Click Save to enable the settings. Record File Parameters Record File Size Select the packed size of the manually recorded and downloaded video files to 256M, 512M or 1G. After the selection, the maximum record file size is the value you selected. Save record files to Set the saving path for the manually recorded video files. Click Save to enable the settings. Picture and Clip Settings Save snapshots in live view to Set the saving path of the manually captured pictures in live view mode. Note You can click Browse to change the directory for saving the clips and pictures, and click Open to open the set folder of clips and picture saving. Click Save to enable the settings. 5.3.3 System Settings Follow the instructions below to configure the system settings, include System Settings, Maintenance, Security, and User Management, etc. Click System to enter the settings page. 61 Video Intercom Module Door Station User Manual Basic Information Click System Settings Basic Information to enter the settings page. On the page, you can edit Device Name and Device No. Set the Language and System Type according to your needs. Click Save to enable the settings. Time Settings Click System Settings Time Settings to enter the settings page. Select the Time Zone of your location from the drop-down list. Enable NTP, set the Server Address, NTP Port and Interval. Enable Manual Time Sync., set the time manually or check the Sync. with computer time. Click Save to enable the settings. DST Click System Settings DST to check Enable DST. Set the parameters according to your needs and click Save to enable the settings. About Click System Settings About to enter the page. Click View Licenses to view open source software Licenses. Maintenance Click Maintenance Upgrade & Maintenance to enter the settings page. 62 Video Intercom Module Door Station User Manual Reboot: Click Reboot to reboot the device. Figure 5-4 Maintenance Default Click Default to restore all parameters to default settings. Restore All Click Restore All to reset all the parameters, except the IP parameters and user information, to the default settings. Export parameters:

1. Select Device Parameters, and click Export to pop up the dialog box. 2. Set and confirm the encryption password. 3. Click OK to export parameters. Import Config. File:

1. Click browse icon to select the configuration file. 2. Click Import and enter the encryption password to import. Upgrade:

1. Click browse icon to select the upgrade file. 2. Click Upgrade. Note The upgrading process will last 1 to 10 minutes, do not power off during the upgrading. The device reboots automatically after upgrading. You can select controller, display module and sub modules to upgrade. 63 Video Intercom Module Door Station User Manual Authentication Click Security Authentication to enter the settings page. On the page, you can select RTSP Authenticationaccording to your actual needs. Click Save to enable the settings. Security Service Click Security Security Service to enter the settings page. On the page, you can enable SSH according to your actual needs. Click Save to enable the settings. User Management Click User Management to enter the settings page. Administrator can edit the permission for the users. Note We highly recommend you to create a strong password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product. Online Users Click User Management Online Users to enter the page. Click Refresh to get the present information. Figure 5-5 Online Users 64 Video Intercom Module Door Station User Manual Arming/Disarming Information Click User Management Arming/Disarming Information to view the information. Click Refresh to get the present information. 5.3.4 Network Settings TCP/IP Settings TCP/IP settings must be properly configured before you operate the device over network. The device supports IPv4. Steps 1. Click Network Basic Settings TCP/IP to enter the settings page. Figure 5-6 TCP/IP Settings 2. Configure the network parameters.

Check DHCP, the device will get the parameters automatically. 65 Video Intercom Module Door Station User Manual

Set the IPv4 Address, IPv4 Subnet Mask and IPv4 Default Gateway manually. 3. Configure the corresponding DNS server parameters. 4. Click Save to enable the settings. Port Settings Steps 1. Click Network Basic Settings Port to enter the settings page. Figure 5-7 Port Settings 2. Set the ports of the device. HTTP Port The default port number is 80, and it can be changed to any port No. which is not occupied. HTTPS Port The default port number is 443, and it can be changed to any port No. which is not occupied. RTSP Port The default port number is 554. Server Port The default server port number is 8000, and it can be changed to any port No. ranges from 2000 to 65535. 3. Click Save to enable the settings. SIP Setting 66 Video Intercom Module Door Station User Manual Steps 1. Click Network Basic Settings SIP to enter the settings page. Figure 5-8 SIP Settings 2. Check Enable VOIP Gateway. 3. Configure the SIP parameters. 4. Click Save to enable the settings. FTP Settings Steps 1. Click Network Advanced FTP to enter the settings page. 67 Video Intercom Module Door Station User Manual Figure 5-9 FTP Settings 2. Check Enable FTP. 3. Select Server Type. 4. Input the Server IP Address and Port. 5. Configure the FTP Settings, and the user name and password are required for the server login. 6. Set the Directory Structure, Parent Directory and Child Directory. 7. Set the picture naming rules. 8. Click Save to enable the settings. 68 Video Intercom Module Door Station User Manual 5.3.5 Video & Audio Settings Video Parameters Steps 1. Click Video/Audio Video to enter the settings page. Figure 5-10 Video Parameters 2. Select the Stream Type. 3. Configure the video parameters. Stream Type Select the stream type to main stream or sub stream. Video Type Select the stream type to video stream, or video & audio composite stream. The audio signal will be recorded only when the Video Type is Video &

Audio. Resolution Select the resolution of the video output. Bitrate Type Select the bitrate type to constant or variable. Video Quality 69 Video Intercom Module Door Station User Manual When bitrate type is selected as Variable, 6 levels of video quality are selectable. Frame Rate Set the frame rate. The frame rate is to describe the frequency at which the video stream is updated and it is measured by frames per second (fps). A higher frame rate is advantageous when there is movement in the video stream, as it maintains image quality throughout. Max. Bitrate Set the max. bitrate from 32 to 16384 Kbps. The higher value corresponds to the higher video quality, but the better bandwidth is required. Video Encoding The device supports H.264. I Frame Interval Set I Frame Interval from 1 to 400. 4. Click Save to save the settings. Audio Parameters Steps 1. Click Video/Audio Audio to enter the settings page. Figure 5-11 Audio Settings 2. Configure the stream type and the audio encoding type. Stream Type Select the stream type to main stream or sub stream. Audio Encoding The device support G.711ulaw and G.711 alaw. 70 Video Intercom Module Door Station User Manual 3. Adjust the Input Volume, Output Volume and Speak Volume. Note Available range of volume: 0 to 10. 4. Click Save to save the settings. 5.3.6 Image Settings Display Settings Configure the image adjustment, backlight settings and other parameters in display settings. Steps 1. Click Image Display Settings to enter the display settings page. Figure 5-12 Display Settings 2. Select the Format. 3. Set the display parameters. WDR Wide Dynamic Range can be used when there is a high contrast of the bright area and the dark area of the scene. Brightness Brightness describes bright of the image, which ranges from 1 to 100. Contrast Contrast describes the contrast of the image, which ranges from 1 to 100. 71 Video Intercom Module Door Station User Manual Saturation Saturation describes the colorfulness of the image color, which ranges from 1 to 100. Sharpness Sharpness describes the edge contrast of the image, which ranges from 1 to 100. 4. Set the Day/Night Mode. Figure 5-13 Day/Night Mode

Set Day Mode or Night Mode manually. Set the mode as Auto and edit the sensitivity according to your needs. Set the mode as Scheduled-Switch. Set the start time and end time. Note Daytime is from configured start time to configured time. The rest of the time is set as night by default. 5. Set the backlight parameters. Figure 5-14 Backlight 72 Video Intercom Module Door Station User Manual 1) Check the checkbox to enable BLC. 2) Select BLC Area. 6. Click Save to enable the settings. OSD Settings You can customize the camera name, time/date format, display mode, and OSD size displayed on the live view. Steps 1. Click Image OSD Settings to enter the settings page. 2. Check the corresponding checkbox to select the display of camera name, date or week if required. 3. Edit the Camera Name. 4. Select from the drop-down list to set the Time Format and Date Format. 5. Adjust the OSD position. 6. Click Save to enable the settings. Target Cropping Steps 1. Click Image Crop to enter the page. 2. Check Enable Target Cropping to enable the function. 3. Click 4. Click to crop photo. to crop video. 5. Select Cropping Resolution. 6. Click Save. Note You can select Cropping Resolution as 704*576, 1280*720, or 1920*1080. You can zoom in or zoom out the image by selecting Cropping Resolutionafter clicking Save. 5.3.7 Schedule Settings 73 Video Intercom Module Door Station User Manual You can create call schedule, or else the device will call indoor station all day by default. Steps 1. Click Schedule Video Intercom Call Schedule . 2. Click the next row below Enable Indoor Station All Day by Default. 3. Enter Schedule Name. 4. Select Call Type. 5. Set Weekly Schedule. 1) Click Weekly Schedule. Figure 5-15 Weekly Schedule 2) Drag mouse to set the schedule according to the actual needs. 3) Optional: Click the copy icon to copy the schedule to other days according to the actual needs. 4) Click Save. 6. Set Holiday Schedule. 1) Click Holiday Schedule. 74 Video Intercom Module Door Station User Manual Figure 5-16 Holiday Schedule 2) Click Add. 3) Set Start Time and End Time. 4) Select Call Type. 5) Drag mouse to set the schedule according to the actual needs. 6) Click OK. 7) You can edit or delete the schedule according to the actual needs. 8) Click Save. Note The holiday schedule have higher priority than weekly schedule when you set the two schedule at the same time. 5.3.8 Intercom Settings Device No. Settings Steps 1. Click Device No. to enter the page. 75 Video Intercom Module Door Station User Manual Figure 5-17 Device No. Settings 2. Select the device type from the drop-down list, and set the corresponding information including Building No., Floor No., Door Station No., Community No. and Unit No. Note When you select Outer Door Station as Device Type, only Outer Door Station No. and Community No. can be set. 3. Click Save to enable the device number configuration. Note For main door station (D series or V series), the No. is 0. For sub door station (D series or V series), the No. cannot be 0. The No.of sub door station ranges from 1 to 99. For each villa or building, at least one main door station (D series or V series) should be configured, and one sub door stations (D series or V series) can be customized. For one main door station (D series or V series), up to 8 sub door stations can be configured. Linked Network Settings Steps 1. Go to Intercom Session Settings to enter the settings page. 2. Set Register Number and Registration Password. 76 Video Intercom Module Door Station User Manual 3. Set Main Station IP and VideoIntercom Server IP. 4. Enable Protocol 1.0. 5. Click Save to enable the settings. Time Parameters Go to Intercom Time Parameters to enter the page. Configure Max. Call Duration, Max. Message Duration, Max. Ring Duration, and click Save. Note Max. call duration between the module indoor station and client ranges from 90 s to 120 s. The call will end automatically when the actual calling duration is longer than the configured one. Max. message duration ranges from 30 s to 60 s. The message will end automatically when the actual message duration is longer than the configured one. Max. ring duration refers to the maximum duration of the module indoor station when it is called without being accepted. Max. ring duration ranges from 65 s to 255 s. Ring-Back Tone Settings Click Intercom Ringbacktone Settings to enter the settings page. Click Add to select the ring tone from PC. Note Available Audio Format: WAVAAC, Size: Less than 600 KB, Sample Rate: 8000Hz, Mono. Press Button to Call Steps 1. Go to Intercom Press Button to Call to enter the settings page. 77 Video Intercom Module Door Station User Manual 2. Edit room No. in the button settings and select Link Time Schedule. Figure 5-18 Press Button to Call Note The number of buttons may vary with different models. Please refer to the actual product. The schedule settings refers to Schedule Settings for details. 3. Click Save to enable the settings. Input and Output Go to Intercom I/O Settings to enter the settings page. Figure 5-19 IO Input and Output Select I/O Input No., Input, I/O Output No. and Output. Click Save to enable the settings. Note I/O Input supports 4-channel inputs. 78 Video Intercom Module Door Station User Manual Table 5-1 I/O Input I/O Input No. Input 1 2 3 4 Door Status Disable/Door Status Exit Button Disable/Exit Button I/O Output supports 2-channel outputs. Table 5-2 I/O Output I/O Output No. Output 1 2 Electric Lock Disable/Electric Lock Sub Module Configuration Steps 1. Click Intercom Sub Module Configuration , and you can view the sub module information, including No., module type, status, and version. 2. Click to edit the sub module. Display Module Slide to adjust Screen Backlight Brightness. Slide Enable Buzzer to enable the function. Touch-Display Module Slide to adjust Screen Backlight Brightness. Slide Enable Buzzer to enable the function. Select Address Book Display Mode according to actual needs. Enable Homepage Shortcut Dial, you can tap contact on the main page to call. Click Add to add custom buttons. 79 Video Intercom Module Door Station User Manual Note The module address is used to differentiate the sub modules. See Configure Sub Module Address for detailed configuration instructions. For the other sub modules (indicator module, keypad module and card reader module), it prompts Not supported. The room No. for the main unit's call button is 1 by default; and the room No. for the nametag modules call buttons are 2 to 7 by default. Number Settings Steps 1. Click Intercom Number Settings , and you can view the No., room No., and SIP number. 2. Add the number. 1) Click Add. 2) Enter Room No., and SIP. 3) Optional: Click Add to add SIP according to the actual needs. 4) Click OK. 3. Optional: Click to edit the number. 5.3.9 Access Control Settings Permission Password Steps 1. Click Access Control Password Settings to enter the settings page. 80 Video Intercom Module Door Station User Manual Figure 5-20 Password Settings 2. Select Password Type. 3. Enter and confirm the password. 4. Click Save to enable the settings. Door Parameters Steps 1. Click Access Control Door Parameters to enter the settings page. Figure 5-21 Door Parameters 2. Select the door and edit the door name. 3. Edit Open Duration. 81 Video Intercom Module Door Station User Manual 4. Set door contact status. 5. Click Save to enable the settings. Card Security Click Access Control Card Security to enter the settings page. Slide to enable card encryption parameters. Click Save to enable the settings. Elevator Control Before You Start Make sure that the door station is in the mode of main door station. Only the main door station supports elevator control function. Steps 1. Click Access Control Elevator Control Parameter to enter the settings page. 82 Video Intercom Module Door Station User Manual 2. Check to enable elevator control function. Figure 5-22 Elevator Control 3. Select an Elevator No., and select an elevator controller type for the elevator. 4. Select Interface Type. 5. Enter Negative Floor Capacity, and select Alarm Receiver Type. 6. Enter the elevator controller's Server IP Address, Port No., User Name, and Password. 7. Click Save to enable the settings. Note Up to 4 elevator controllers can be connected to one door station. Up to 10 negative floors can be added. Make sure the interface types of elevator controllers, which are connected to the same door station are consistent. 83 Video Intercom Module Door Station User Manual 5.3.10 Theme Settings Set the advertisement on the main page of the device. Steps 1. Click Configuration Theme to enter the settings page. 2. Check to enable screen saving function. 3. Set the advertisement theme. 1) Click + Add Theme. 2) Create a theme name, and select the advertisement body as picture or Video. 3) Click Save. 4. Click + to select a picture from the local as the material to be played in standby, and click upload. 5. Set the play schedule. 1) Select a theme and drag the time interval to be played on the timeline. 2) Optional: Click the drawn area to edit the time manually. 3) Click Delete to delete the selected area. Click Delete All to delete all selected areas. 6. Adjust Slide Show Interval. Drag the block or enter the number to set the slide show interval. The picture will be changed according to the interval. 7. Optional: Slide to enable show custom content and edit custom content. The custom content displays on the main page of the device. 8. Click Save. 5.4 Organization Management On the main page of the Client Software, click the configuration page. PersonalManagement to enter 5.4.1 Add Organization 84 Video Intercom Module Door Station User Manual Steps 1. In the organization list on the left, click +Add. 2. Enter the Organization Name as desired. 3. Click OK to save the adding. 4. Optional: You can add multiple levels of organizations according to the actual needs. 1) You can add multiple levels of organizations according to the actual needs. 2) Then the added organization will be the sub-organization of the upper-level organization. Note Up to 10 levels of organizations can be created. 5.4.2 Modify and Delete Organization You can select the added organization and click to modify its name. You can select an organization, and click X button to delete it. Note The lower-level organizations will be deleted as well if you delete an organization. Make sure there is no person added under the organization, or the organization cannot be deleted. 5.5 Person Management After adding the organization, you can add person to the organization and manage the added person such as issuing cards in batch, importing and exporting person's information in batch, etc. Note Up to 2,000 persons can be added. Up to 5 cards can be added to each person. 5.5.1 Add Person 85 Video Intercom Module Door Station User Manual Person information is necessary for the video intercom system. And when you set linked device for the person, the intercom between intercom devices can be realized. Steps 1. Select an organization in the organization list and click Add on the Person panel to pop up the adding person dialog. Note The Person No. will be generated automatically and is editable. 2. Set basic person information. 1) Enter basic information: name, gender, tel, birthday details, effective period and email address. Note The length of person name should be less than 15 characters. 2) Click Add face to upload the photo. Note The picture should be in *.jpg format. Click Upload Select the person picture from the local PC to upload it to the client. Click Take Phone Take the person's photo with the PC camera. Click Remote Collection 3. Issue the card for the person. 1) Click Credential Card . Take the person's photo with the collection device. 2) Click + to pop up the Add Card dialog. 3) Select Normal Card as Card Type. 4) Enter the Card No. 5) Click Read and the card(s) will be issued to the person. 4. Link the device to the person. 1) Set the linked devices. Linked Device You can bind the indoor station to the person. 86 Video Intercom Module Door Station User Manual Note If you select Analog Indoor Station in the Linked Device, the Door Station field will display and you are required to select the door station to communicate with the analog indoor station. Room No. You can enter the room No. of the person. 2) Click OK to save the settings. 5. Click Add to save the settings. 5.5.2 Modify and Delete Person Select the person and click Edit to open the editing person dialog. To delete the person, select a person and click Delete to delete it. Note If a card is issued to the current person, the linkage will be invalid after the person is deleted. 5.5.3 Import and Export Person Information The person information can be imported and exported in batch. Steps 1. Exporting Person: You can export the added persons' information in Excel format to the local PC. 1) After adding the person, you can click Export Person to pop up the following dialog. 2) Click ... to select the path of saving the exported Excel file. 3) Check the checkboxes to select the person information to export. 4) Click OK to start exporting. 2. Importing Person: You can import the Excel file with persons information in batch from the local PC. 1) Click Import Person. 2) You can click Download Template for Importing Person to download the template first. 3) Input the person information to the downloaded template. 87 Video Intercom Module Door Station User Manual 4) Click ... to select the Excel file with person information. 5) Click OK to start importing. 5.5.4 Get Person Information from Device If the added device has been configured with person information (including person details, fingerprint, issued card information), you can get the person information from the device and import to the client for further operation. Steps Note This function is only supported by the device the connection mothod of which is TCP/IP when adding the device. 1. In the organization list on the left, click to select an organization to import the persons. 2. Click Get from Device to pop up the dialog box. 3. The added device will be displayed. 4. Click to select the device and then click Get to start getting the person information from the device. Note The person information, including person details, person's fingerprint information (if configured), and the linked card (if configured), will be imported to the selected organization. If the person name stored in the device is empty, the person name will be filled with the issued card No. after importing to the client. The gender of the persons will be Male by default. 5.5.5 Change Person to Other Organization You can move the person to another organization if needed. Steps 1. Select the person in the list and click Change Organization. 2. Select the organization to move the person to. 3. Click OK to save the settings. 88 Video Intercom Module Door Station User Manual 5.5.6 Issue Card in Batch You can issue multiple cards for the person with no card issued in batch. Steps 1. Click Batch Issue Cards to enter the dialog page. All the added person with no card issued will display in the Person(s) with No Card Issued list. 2. Click Settings. Figure 5-23 Issue Card in Batch 89 Video Intercom Module Door Station User Manual Figure 5-24 Card Settings 3. Select Card Type and Card No. Type. 4. Click OK to save the settings. Result After issuing the card to the person, the person and card information will display in the Person(s) with Card Issued list. 5.5.7 Permission Settings Add Permissions Steps 1. On the main page, click AccessControlInfo Access Group to enter the page. 2. Click +Add to pop up the adding dialog box. 3. Configure the parameters. 1) Enter the Name of the permission. 90 Video Intercom Module Door Station User Manual 2) Select the Template of the schedule. 3) Check the person to Selected according to your needs. 4) Check the device to Selected according to your needs. 4. Click Save. 5. Check the permission and click Apply All to Device. The status of the permission displays as Applied. 6. Optional: Click Applying Status to check the details. Modify/Delete Permissions On the page of the permission settings, click permission. to edit the parameters of the Select one or more permissions, click Delete to remove the permissions. 91 Video Intercom Module Door Station User Manual 6 Video Intercom Operation 6.1 Video Intercom Operation via Device 6.1.1 Call Resident Note Make sure you have configured the room No. of the device. Make sure you have add contacts to the device via iVMS-4200 Client Software. Call Resident via Main Module or Nametag Module Press the call button on the main unit or on the nametag unit. Call Resident via Keypad Module Enter the Room No. on the keypad module, and press # to start calling. Note You can press * via keypad module to hang up. Call Resident via Display Module Press or on the display module to enter the contact list. Press or hold / to select a contact. Press OK and confirm to call. Note Hold or to scroll the page up or down faster. You can press Back button via display module to hang up. Call Resident via Touch-Display Module You can call corresponding resident in the two ways. They are:

92 Video Intercom Module Door Station User Manual On the main page of the touch-display module, tap and enter the No. to call. On the main page of the touch-display module, tap to select a contact in the list to call. Note Two themes of the main page are supported. You can change it remotely via client software. 6.1.2 Issue Card Before You Start Make sure you have issue the card locally or remotely. See Person Management for issuing card via Client software for details. Issue Card via Main Card: You can swipe card to issue it after swiping the main card in advance. Steps 1. Present the main card on the card reading area, and hear two beeps. 2. Present the unauthorized sub cards in turn after hearing a beep. 3. Present the main card again to end the card issuing process. Note DS-KD-M/DS-KD-TDM supports Mifare card, DS-KD-E/DS-KD-TDE supports EM card. If the amount of sub cards exceeds 10000, no more sub cards can be issued. Up to 5 sub cards can be issued once. The issued frequency is no more than 2000. 6.1.3 Unlock Door Unlock Door by Password You can unlock the door by entering the password via the keypad module or touch-display module. 93 Video Intercom Module Door Station User Manual Note On the main page of touch-display module, tap to enter the call/unlock page to unlock the door. Four formats of password are supported. They are:

#+ Public Password +#

#+ Password +#

#+ Duress Password +#

Note Password contains 6 digits. You're allowed to set 3 public passwords via iVMS-4200 client software. The password varies according to different rooms. Unlock Door by Card Note Make sure the card has been issued. You can issue the card via the door station, or via iVMS-4200 client software. Present the card on the card induction area via card reader module or touch-display module (with card reading function) to unlock the door. Note The main card does not support unlocking the door. 6.2 Video Intercom Operation via Client Software The Video Intercom Management module provides the function of video intercom, checking call logs and managing notice via the iVMS-4200 Client Software. Note For the user with access control module permissions, the user can enter the Access Control module and manage video intercom and search information. You should add the device to the software and configure the person to link the device in Access Control module before your configuration remotely. 94 Video Intercom Module Door Station User Manual Click to enter the Video Intercom page. AccessControlInfo Video Intercom Video Intercom on the left bar 6.2.1 Receive Call from Door Station Steps 1. Select the client software in door station page to start calling the client and an incoming call dialog will pop up in the client software. Figure 6-1 Device Call 2. Click Answer to answer the call. Or click Hang Up to decline the call. 3. After you answer the call, you will enter the In Call page. Adjust the Volume of Loudspeaker Click to adjust the volume of loudspeaker. Hang Up Click Hang Up to hang up. Adjust the Volume of Microphone Unlock Remotely to adjust the volume of the Click microphone. For door station, you can click door remotely. to open the 95 Video Intercom Module Door Station User Manual Note One video intercom device can only connect with one client software. The maximum ring duration can be set from 15s to 60s via the Remote Configuration of the video intercom device. The maximum speaking duration between indoor station and iVMS-4200 can be set from 120s to 600s via the Remote Configuration of indoor station. The maximum speaking duration between door station and iVMS-4200 can be set from 90s to 120s via the Remote Configuration of door station. 6.2.2 Live View via Door Station You can get the live view of the main unit in the Main View module and control the door station remotely. In the Main View module, double-click a door station or drag the device to a display window to start the live view. Right click on the live view page, clickthe unlock icon to remote unlock the door. 6.2.3 View Call Logs Before You Start You can check all the call logs, including dialed call logs, received call logs and missed call logs. You can also directly dial via the log list and clear the logs. Steps 1. In the Video Intercom page, click Call Log to enter the Call Log page. 96 Video Intercom Module Door Station User Manual Figure 6-2 View Call Logs All the call logs will display on this page and you can check the log information, e.g., call status, start time, resident's organization and name, device name and ring or speaking duration. 2. Optional: Click the call button to re-dial the resident. 6.2.4 Search Video Intercom Information You can search the call logs between the iVMS-4200 client software and video intercom devices, device unlocking logs and the sent notice information. In the main page, click AccessControlInfo to enter the access control module. In the Access Control module, click Video Intercom. Search Call Logs Steps 1. In the Video Intercom page, click Call Log to enter the Call Log page. 97 Video Intercom Module Door Station User Manual 2. Set the search conditions, including call status, device type, start time and end Figure 6-3 Call Logs time. Call Status Click to unfold the drop-down list and select the call status as Dialed, Received or Missed. Or select All to search logs with all statuses. Device Type Click to unfold the drop-down list and select the device type as Indoor Station, Door Station, Outer Door Station or Analog Indoor Station. Or select All Devices to search logs with all device types. Day Mode Start Time/Day Mode End Time to specify the start time and end time of a time period to search the Click logs. Reset the Settings Click Reset to reset all the configured search conditions. 3. Click Search and all the matched call logs will display on this page. 4. Optional: Check the detailed information of searched call logs, such as call status, ring/speaking duration, device name, resident organization, etc. 5. Optional: Input keywords in the Search field to filter the desired log. 6. Optional: Click Export to export the call logs to your PC. Search Unlocking Logs 98 Video Intercom Module Door Station User Manual Steps 1. In the Information Search page, click Unlocking Log to enter the Unlocking Log page. 2. Set the search conditions, including unlocking type, device type, start time and Figure 6-4 Unlocking Logs end time. Unlocking Type Click to unfold the drop-down list and select the unlocking type as Unlock by Password, Unlock by Duress, Unlock by Card, Unlock by Resident or Unlock by Center. Or select All to search logs with all unlocking types. Device Type Click to unfold the drop-down list and select the device type as Door Station or Door Station (V Series). Or select All Devices to search logs with all device types. Start Time/End Time to specify the start time and end time of a time period to search the Click logs.

`Reset the Settings Click Reset` to reset all the configured search conditions. 3. Click Search and all the matched unlocking logs will display on the page. 4. Optional: Check the detailed information of searched unlocking logs, such as unlocked time, card No., device No., etc. 5. Optional: Input keywords in the Search field to filter the searching result. 99 Video Intercom Module Door Station User Manual 6. Optional: Click on the Capture column to view the captured pictures. Note Viewing captured picture should be supported by device. 7. Optional: Click Export to export the unlocking logs to your PC. 100 Video Intercom Module Door Station User Manual A. Communication Matrix and Device Command Communication Matrix Scan the following QR code to get the device communication matrix. Note that the matrix contains all communication ports of Hikvision access control and video intercom devices. Figure A-1 QR Code of Communication Matrix Device Command Scan the following QR code to get the device common serial port commands. Note that the command list contains all commonly used serial ports commands for all Hikvision access control and video intercom devices. Figure A-2 Device Command 101 UD23547B

AIK VISION Touch Display Module Model: DS-KD-TDM VP: 12V==1A MAX OP: 12V==0.65A MAX SN: C12345678 V5.5.83_ 190218 Made in China 09/2021 CAN ICES-3(B)/NMB-3(B) FCC ID:2ADTD-TDM This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)this device may not cause harmful interference, and

(2)this device must accept any interference received, including interference that may cause undesired operation. Manufacturer: Hangzhou Hikvision Digital Technology Co.,Ltd. Address: No.555 Qianmo Road, Binjiang District,Hangzhou 310052, China =

HIKVISION

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name Hangzhou Hikvision Digital Technology Co., Ltd. Address Grantee Code FCC ID Authorized Contact Name Contact Email Contact Phone No. 555 Qianmo Road, Binjiang District Hangzhou 310052, China 2ADTD 2ADTD-TDM Long Cheng chenglong6@hikvision.com

+8618969187825 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

a) b) c) d) e) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

(1)

(2)

(3) labeling the equipment with the exact FCC ID as specified in this application, compliance statement labeling pursuant to the applicable rules, compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Date:2021/10/16 Applicant Signature:

Print Name:

Title:

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Long Cheng Testing & Certification Engineer Applicant Declaration Rev:0.0

Hangzhou Hikvision Digital Technology Co., Ltd. TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2ADTD-TDM To whom it may concern:

Date: 2021-10-16 We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Hangzhou Hikvision Digital Technology Co., Ltd. This authorization is valid until further written notice from the applicant. Name (Printed): Long Cheng Title: Testing & Certification Engineer Signature:

On behalf of Company: Hangzhou Hikvision Digital Technology Co., Ltd. Telephone: +8618969187825

Hangzhou Hikvision Digital Technology Co., Ltd. To:

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Hangzhou Hikvision Digital Technology Co., Ltd. No. 555 Qianmo Road, Binjiang District, angzhou 310052, China Regarding:

Confidentiality Request regarding application for FCC ID: 2ADTD-TDM LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature:

Printed Name (on file with the FCC associated with the Grantee Code): Long Cheng Title: Testing & Certification Engineer Company Name: Hangzhou Hikvision Digital Technology Co., Ltd.

Hangzhou Hikvision Digital Technology Co., Ltd. Current Date : 2021-10-16 To:

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. No. 588 West Jindu Road, Songjiang District, Shanghai, China. 201612 Dear Sir/Madam, Subject: Declaration Letter about Identity of Products

*WE (Hangzhou Hikvision Digital Technology Co., Ltd.) HEREBY DECLARED THAT Product Description Touch Display Module Model No. DS-KD-TDMUHK,DS-KD-TDMCKV,DS-KD-TDMUVS, DS-KD-TDMKVO,DS-KD-TDMHUN Manufacturers Name Hangzhou Hikvision Digital Technology Co., Ltd. Manufacturers Address No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China

*Except that the model number deviation, are identical with the original product as follows:

Note: The definition of identical should be electrically identical. A device will be considered to be electrically identical if no changes are made to the devices schematics, board layouts, component layouts, chip sets, resistors and all other electrical aspects of the device are identical. Model No. ():

DS-KD-TDM Manufacturers Name ():

Hangzhou Hikvision Digital Technology Co., Ltd. Manufacturers Address): No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Sincerely, Signature ():

Printed Name ():

Long Cheng Position/Title ():

Testing & Certification Engineer Contact Number ():

+8618969187825