| all | frequencies |
|
|
|
|
exhibits | applications |
|---|---|---|---|---|---|---|---|
| manual | photos | label | |||||
| app s | submitted / available | |||||||
|---|---|---|---|---|---|---|---|---|
| 1 |
|
User Manual | Users Manual | 4.63 MiB | August 08 2019 | |||
| 1 |
|
Interal photo | Internal Photos | 600.66 KiB | August 08 2019 | |||
| 1 |
|
External photo | External Photos | 639.03 KiB | August 08 2019 | |||
| 1 |
|
Label | ID Label/Location Info | 319.63 KiB | August 08 2019 | |||
| 1 | Block Diagram | Block Diagram | August 08 2019 | confidential | ||||
| 1 |
|
Confidentiality letter | Cover Letter(s) | 23.09 KiB | August 08 2019 | |||
| 1 | Operation Description | Operational Description | August 08 2019 | confidential | ||||
| 1 |
|
Power of Attorney Letter | Cover Letter(s) | 23.37 KiB | August 08 2019 | |||
| 1 |
|
RF Exposure Info | RF Exposure Info | 454.48 KiB | August 08 2019 | |||
| 1 | SDR Software | SDR Software/Security Inf | August 08 2019 | confidential | ||||
| 1 | Schematics | Schematics | August 08 2019 | confidential | ||||
| 1 |
|
Test Report | Test Report | 5.16 MiB | August 08 2019 | |||
| 1 |
|
Test Setup Photo | Test Setup Photos | 415.82 KiB | August 08 2019 |
| 1 | User Manual | Users Manual | 4.63 MiB | August 08 2019 |
See Far,Go Further DS-3WF02C-5N/O Quick Start Guide DS-3WF02C-5N/O Quick Start Guide DS-3WF02C-5N/O Quick Start Guide Quick Start Guide COPYRIGHT 2019 Hangzhou Hikvision Digital Technology Co., Ltd. ALL RIGHTS RESERVED. Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be Hikvision). This user manual (hereinafter referred to be the Manual) cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of Hikvision. Unless otherwise stipulated, Hikvision does not make any warranties, guarantees or representations, express or implied, regarding to the Manual. About this Manual This Manual is applicable to DS-3WF02C-5N/O (Product Series). The Manual includes instructions for using and managing the product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version in the company website (http://overseas.hikvi-
sion.com/en/). Please use this user manual under the guidance of professionals. Trademarks Acknowledgement and other Hikvisions trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned below are the properties of their respective owners. Legal Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED AS IS, WITH ALL FAULTS AND ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICU-
LAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEV-
ER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS. Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. 3.This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, the LVD Directive 2014/35/EU, the RoHS Directive 2011/65/EU. 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recycle-
this.info 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements. DS-3WF02C-5N/O Quick Start Guide DS-3WF02C-5N/O Quick Start Guide Catalog Chapter 1 Introduction ............................................................................................................. 1 1.1 Overview ............................................................................................................................ 1 1.2 Packing List ......................................................................................................................... 1 1.3 Appearance ........................................................................................................................ 1 1.3.1 Front Panel ...................................................................................................................... 1 Chapter 2 Installation ............................................................................................................... 3 Chapter 3 Prepare .................................................................................................................... 5
......... 7 Chapter 4 Conguration ......................................................................................................... Applicable Models This manual is applicable to switches below: DS-3WF02C-5N/O (product series). Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description NOTE Provides additional important points of the main text. information to emphasize or supplement WARNING Indicates a potentially hazardous situation, which if not avoided, could result loss, performance degradation, or unexpected results. in equipment damage, data DANGER Indicates a hazard with a high level of risk, which if not avoided, will result in death or serious injury. WARNING During the installation and utilization of the device, please strictly conform to electrical safety rules in different nations and regions. You shall acknowledge that the use of the device with Internet access might be under network security risks, please strengthen protection for your personal information and data security. If you find the device might be under network security risks, please contact with us. DS-3WF02C-5N/O Quick Start Guide Chapter 1 Introduction 1.1 Overview DS-3WF02C-5N/O wireless bridge can be applied in industries, such as wireless video surveillance, railway, transportation, power and other industries, wireless video/data transmis-
sion, wireless coverage, carrier wireless backbone network construction, Wi-Fi wireless coverage, rural information construction, and wireless network coverage. The long-distance transmission of the device can guarantee multi-channel HD video transmission. 1.2 Packing List The packing list is shown as below. If any accessories are damaged or lost, keep the package intact and contact your dealer for replacement. Name Device PoE Adapter Power Cord Hoop Quick Start Guide Item DS-3WF02C-5N/O 24 V, 0.5 A Power Cord Hoop for mounting device Instruction manual Quantity 1 1 1 1 1 Table 1-1 Packing List of DS-3WF02C-5N/O 1.3 Appearance 1.3.1 Front Panel Front panel of DS-3WF02C-5N/O is shown as below. Front Panel of DS-3WF02C-5N/O DS-3WF02C-5N/O Quick Start Guide Indicator Indicators are used to monitor the status of the DS-3WF02C-5N/O. See the following table for the description of the indicators. Figure 1-2 Indicators Indicator LAN WLAN Description Power indicator. If the green light is steady on, it indicates that the power is on. Network connection light. The light indicates there is one IPC or other network device connects to the LAN port of PoE adapter. Blinking means sending data. Wireless indicator light. The light indicates that the wireless is enabled. Blinking means sending data. Signal strength indicator light. Red light on, indicating that the signal is weak or no signal. Yellow and red lights on, indicating signal level is medium. Green, yellow and red lights on, indicating the wireless signal level is strong Table 1-2 Indicator Description Physical Interface The hardware interfaces of the DS-3WF02C-5N/O are as follows. 1 Figure 1-1 DS-3WF02C-5N/O Front Panel Figure 1-3 Physical Interface Physical Interface Description LAN Reset The reserved network port can be connected to front-end network devices such as IPC. Used to restore the default factory settings. POE The network cable is connected to the POE on the PoE power module to provide power and data transmission to the device. Table 1-3 Physical Interface 2 DS-3WF02C-5N/O Quick Start Guide Chapter 2 Installation DS-3WF02C-5N/O Quick Start Guide Step 3 The schematic diagram of the installation of the device is as follows. Step 1 Select the unobstructed high point around the device to ensure that the devices are aligned and there is no obstruction in the middle. Fix the device as shown in the figure below. Attach the back of the device to the pole, use the hoop to pass through the hoop hole on the back of the device, tighten the hoop, and fix the device on the pole. LAN PoE PoE LAN PoE Adapter Figure 2-1 Install host Figure 2-3 Finish installation Step 2 Connect the PoE interface of the device to the PoE interface of the PoE power supply through the network cable. The LAN interface of the device and the LAN interface of the PoE power supply can be connected to the front-end network devices such as IPC through the network cable, as shown in the following figure. PoE Adapter POE LAN Protective cover The PoE port of the device is connected to the PoE port of the PoE adapter through a network cable. Figure 2-2 Power on the device 3 4 DS-3WF02C-5N/O Quick Start Guide Chapter 3 Prepare Step 1 Use a network cable to connect the computer to the LAN interface of the device or PoE power supply to prepare the device. First, you need to configure the computer IP address and the device's default IP address to be on the same network segment. Take the Windows 7 system as an example. Click the network logo in the lower right corner of the desktop and click Open Network & Internet settings-Network and Sharing Center. As shown below. Network Internet settings Change settings,such as makeing a connection metered. MK-WIFI Airplane mode Mobile hotspot 9:43 PM 1/1/2019 Figure 3-1 Network & Internet settings ENG Step 2 Click Local Area Connection on the right and click Properties. As shown below. Ethernet 2 Status General Connection IPv4 Connectivity:
IPv6 Connectivity:
Media State:
Duration:
Speed:
Details... Activity Sent Bytes:
57,467 Properties Disable Diagnose Internet Internet Enabled 00:00:35 1.0Gbps Received 117,331 Close Figure 3-2 Local Area Connection Step 3 Double-click Internet Protocol Version 4 (TCP/IPv4). As shown below. 5 DS-3WF02C-5N/O Quick Start Guide Ethernet 2 Properties Networking Sharing Connect using:
ASIX AX88179 USB 3.0 to Gigabit Ethernet Adapter This connection uses the following items:
Configure... Client for Microsoft Networks File and Printer Sharing for Microsoft Networks QoS Packet Scheduler Internet Protocol Version 4TCP/IPv6 Microsoft Network Adapter Multiplexor Protocol Microsoft LLDP Protocol Driver Internet Protocol Version 6TCP/IPv6 Install... Uninatall Properties Descripton Transmission Control Protocol/Internet Protocol. The default wide area network protocol that provides communication across diverse interconnected networks. Figure 3-3 Internet Protocol Version 4 (TCP/IPv4) OK Cancel Step 4 Configure the IP address of the computer to be the unused 192.168.1.X address in the LAN. X is any integer other than 36 in 2 to 253. The subnet mask is 255.255.255.0. Click "OK"
as shown below. General You can get IP settings assigned automatically if your network supports this capablity. Otherwise,you need to ask your network adminstrator for the appropriate IP settings. Obtain an IP address automatically Use the following IP address:
IP address:
Subnet mask:
Default gateway:
192 .168 . 1 . 2 255 . 255 . 255 . 0 Obtian DNS server address automatically Use the following DNS server addresses Preferred DNS server Alternate DNS server Validate settings upon exit Advanced... Figure 3-4 Configure the IP 6 DS-3WF02C-5N/O Quick Start Guide Chapter 4 Configuration After the preparation is completed, start the device configuration. Step 1 Make sure that the IP address of the computer is inconsistent with the default IP address of the device. On the same network segment, use a browser to log in to the device, open a browser, and enter the default IP address of the device in the address bar: 192.168.1.36. NOTE When you log in to the device for the first time, click Enter, enter the device activate page. The user name is admin, and the user password is set by the user. You also need to select your password, country, language and time zone, as shown in Figure 4-1. Check "I agree to these terms of use" and click "Activate. Take the AP device as an example. Username admin New Password Please set a password Confirm Password Please confirm the password Country/Region Please select country code Time Zone Please select time zone Language English TERMS OF USE Installer must install this device professionally. It is the installer's responsibility to follow local country regulations including operation within legal frequency channels,output power requirements. I agree to these terms of use Figure 4-1 login Step 2 Go to the device page and click the Wizard bar at the top of the page to enter the Network page to set the IP address of the device. In the address field of the LAN IP, fill in 192.168.1.X, X is any integer from 2 to 253, and the address is not used. The subnet mask can be used by default. Click Next when finished. 7 DS-3WF02C-5N/O Quick Start Guide This wizard page is only used in bridge mode helps to set the basic network parameters. Network LAN IP:
192.168.1.36 LAN Netmask:
255.255.255.0 Gateway IP:
192.168.1.100 Figure 4-2 Wizard Network Step 3 Go to the Wireless page. The device can modify the wireless parameters such as network name, frequency, and key through this page. The default wireless mode of the device is the WDS Station. The default network name of the device is Wireless_R. When pairing with the WDS Access Point device, please note that the key and the SSID on the WDS Station side must be the same as the WDS Access Point. Other configurations are recommended to keep the default values. Click "Next". This wizard page helps to set the basic wireless and wireless security,Please click the topWirelessmenu for detail setting. Wireless Wireless Mode:
WDS Station SSID:
Wireless_R Output Power:
Allowing adjusting transmission power Caution:It is installer`s responsibility to follow local regulations while adjusting the transmission power IEEE802.11 Mode:
A/N mixed Channel Width:
20 MHz Wireless Security[?]:
WPA WPA2-PSK Key:
Figure 4-3 Wizard Wireless Step 4 Go to the Setup Wizard Finish page and click Change to save the configuration. 8 DS-3WF02C-5N/O Quick Start Guide Wizard-Finish You have finished the wizard. please click Changeto save all your settings,and clickApplyto reboot and make your settings work. Figure 4-4 Wizard Finish Users can also click the Wireless bar at the top of the page to enter the Wireless page and modify the network name, frequency, key and other parameters. Wireless Mode[?]:
WDS Station SSID:
Wireless_R Antenna Gain:
Output Power:
Allowing adjusting transmission power Caution:It is installer`s responsibility to follow local regulations while adjusting the transmission power Basic Wireless Settings IEEE 802.11 Mode:
A/N mixed Country Code:
Argentina Channel Width[?]:
20 MHz Max TX Rate,Mbps[?]:
MCS 15-130(144) Lock AP Mac:
Wireless Security Settings Security:
WPA Mode:
WPA2 Cypher:
CCMP WPA Key:
Show Figure 4-5 Wireless For the WDS Access Point device configuration, please refer to the WDS Station device configuration. 9
| 1 | Interal photo | Internal Photos | 600.66 KiB | August 08 2019 |
SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 1 of 6 Internal Photos Hangzhou Hikvision Digital Technology Co., Ltd. No. 555 Qianmo Road, Binjiang District, Hangzhou 310052, China Applicant:
Address of Applicant:
Equipment Under Test (EUT):
Product Name:
Model No.:
Wireless Bridge DS-3WF02C-5N/O Page 1 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 2 of 6 Page 2 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 3 of 6 Page 3 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 4 of 6 Page 4 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 5 of 6 Page 5 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 6 of 6 End Page 6 of 6
| 1 | External photo | External Photos | 639.03 KiB | August 08 2019 |
SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 1 of 8 External Photos Hangzhou Hikvision Digital Technology Co., Ltd. No. 555 Qianmo Road, Binjiang District, Hangzhou 310052, China Applicant:
Address of Applicant:
Equipment Under Test (EUT):
Product Name:
Model No.:
Wireless Bridge DS-3WF02C-5N/O Page 1 of 8 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 2 of 8 Page 2 of 8 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 3 of 8 Page 3 of 8 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 4 of 8 Page 4 of 8 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 5 of 8 Page 5 of 8 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 6 of 8 Page 6 of 8 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 7 of 8 Page 7 of 8 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 8 of 8 End Page 8 of 8
| 1 | Label | ID Label/Location Info | 319.63 KiB | August 08 2019 |
Label FCC statement Label:
FCC statement:
| 1 | Confidentiality letter | Cover Letter(s) | 23.09 KiB | August 08 2019 |
No. 555 Qianmo Road, Binjiang District, Hangzhou 310052, China Confidentiality Request regarding application for FCC ID: 2ADTD-T02C5N0O SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States Hangzhou Hikvision Digital Technology Co., Ltd. To:
From: Hangzhou Hikvision Digital Technology Co., Ltd. Regarding:
LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions Software Security Info The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature:
Printed Name (on file with the FCC associated with the Grantee Code): Xiuying Zhang Title: Senior Certification engineer Company Name: Hangzhou Hikvision Digital Technology Co., Ltd.
| 1 | Power of Attorney Letter | Cover Letter(s) | 23.37 KiB | August 08 2019 |
Hangzhou Hikvision Digital Technology Co., Ltd. TO:
Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Date: 2019-08-01 Regarding: FCC ID: 2ADTD-T02C5N0O To whom it may concern:
We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Hangzhou Hikvision Digital Technology Co., Ltd. This authorization is valid until further written notice from the applicant. Name (Printed): Xiuying Zhang Title: Senior Certification engineer Signature:
On behalf of Company: Hangzhou Hikvision Digital Technology Co., Ltd. Telephone: +86-571-88075998
| 1 | RF Exposure Info | RF Exposure Info | 454.48 KiB | August 08 2019 |
SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM190601387702 Page: 1 of 7 1 Cover Page RF MPE REPORT Application No.:
FCC ID:
Applicant:
Address of Applicant:
Manufacturer:
Address of Manufacturer: No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Factory:
SHEM1906013877CR 2ADTD-T02C5N0O Hangzhou Hikvision Digital Technology Co., Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Hangzhou Hikvision Digital Technology Co., Ltd. 1, Hangzhou Hikvision Technology Co., Ltd. 2, Hangzhou Hikvision Electronics Co., Ltd. 3, Hangzhou Hikvision Digital Technology Co., Ltd. 1, No.700, Dongliu Road, Binjiang District, Hangzhou City, Zhejiang, 310052, China 2, No.299, Qiushi Road, Tonglu Economic Development Zone, Tonglu County, Hangzhou, Zhejiang, 310052, China. 3, No. 555 Qianmo Road, Binjiang District, Hangzhou 310052, China Address of Factory:
Equipment Under Test (EUT):
EUT Name:
Model No.:
Add Model No.:
Trade mark:
Standard(s) :
Wireless Bridge DS-3WF02C-5N/O DS-3WF02C-5N/OUHK, DS-3WF02C-5N/OCKV, DS-3WF02C-5N/OUVS, DS-3WF02C-5N/OKVO, DS-3WF02C-5N/OHUN HIKVISION FCC Rules 47 CFR 2.1091 KDB447498 D01 General RF Exposure Guidance v06 2019-06-05 2019-06-10 to 2019-06-20 2019-07-05 Pass*
Date of Receipt:
Date of Test:
Date of Issue:
Test Result:
* In the configuration tested, the EUT complied with the standards specified above. Parlam Zhan E&E Section Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM190601387702 Page: 2 of 7 Version Description Revision Record Date Original 2019-07-05 00 Authorized for issue by:
Vincent Zhu / Project Engineer Parlam Zhan /Reviewer Remark
/
SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM190601387702 Page: 3 of 7 2 Contents 1 2 3 3.1 3.2 3.3 3.4 Page COVER PAGE ................................................................................................................................................. 1 CONTENTS ..................................................................................................................................................... 3 GENERAL INFORMATION ........................................................................................................................... 4 GENERAL DESCRIPTION OF E.U.T. ........................................................................................................ 4 TECHNICAL SPECIFICATIONS ................................................................................................................... 4 TEST LOCATION ....................................................................................................................................... 5 TEST FACILITY ......................................................................................................................................... 5 TEST STANDARDS AND LIMITS ............................................................................................................... 5 FCC RADIOFREQUENCY RADIATION EXPOSURE LIMITS: ......................................................................... 5 5 MEASUREMENT AND CALCULATION ..................................................................................................... 6 MAXIMUM TRANSMIT POWER ................................................................................................................... 6 MPE CALCULATION ................................................................................................................................. 7 5.1 5.2 4.1 4 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM190601387702 Page: 4 of 7 3 General Information 3.1 General Description of E.U.T. Power supply:
Test voltage:
Cable:
DC 24V 0.5A by POE POE:
Input:100-240V~50/60Hz 0.5A MAX Output:24V 0.5A AC 120V 60Hz AC Cable 80cm for POE 3.2 Technical Specifications Operation Frequency:
Band Band 1 Band 4 Mode 802.11a/n(HT20) 802.11n(HT40) 802.11a/n(HT20)/ac(HT20) 802.11n(HT40)/ac(HT40) Frequency Range(MHz) 5180-5240 5190-5230 5745-5825 5755-5795 Number of channels 4 2 5 2 Modulation Type:
Channel Spacing:
Antenna Gain Antenna Type 802.11a: OFDM (64QAM, 16QAM, QPSK, BPSK) 802.11n: OFDM (BPSK, QPSK, 16QAM, 64QAM) 802.11a/n(HT20): 20MHz 802.11n(HT40): 40MHz Antenna 1:10 dBi Antenna 2:10 dBi PCB Antenna SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM190601387702 Page: 5 of 7 3.3 Test Location All tests were performed at:
SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch 588 West Jindu Road, Xinqiao, Songjiang, 201612 Shanghai, China Tel: +86 21 6191 5666 No tests were sub-contracted. Fax: +86 21 6191 5678 3.4 Test Facility The test facility is recognized, certified, or accredited by the following organizations:
CNAS (No. CNAS L0599) CNAS has accredited SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories
(CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration Laboratories) for the competence in the field of testing. NVLAP (Certificate No. 201034-0) SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. is accredited by the National Voluntary Laboratory Accreditation Program(NVLAP). Certificate No. 201034-0. FCC Designation Number: CN5033 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. has been recognized as an accredited testing laboratory. Designation Number: CN5033. Test Firm Registration Number: 479755. Innovation, Science and Economic Development Canada SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. EMC Laboratory has been recognized by ISED as an accredited testing laboratory. IC Registration No.: 8617A-1. CAB Identifier: CN0020. VCCI (Member No.: 3061) The 3m Semi-anechoic chamber and Shielded Room of SGS-CSTC Standards Technical Services
(Shanghai) Co., Ltd. has been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: R-13868, C-14336, T-12221, G-10830 respectively. 4 Test Standards and Limits 4.1 FCC Radiofrequency radiation exposure limits:
According to1.1310, the limit for general population/uncontrolled exposures Frequency Power density(mW/cm2) Averaging time(minutes) 300MHz~1.5GHz 1.5GHz~100GHz f/1500 1.0 30 30 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM190601387702 Page: 6 of 7 5 Measurement and Calculation 5.1 Maximum transmit power The Power Data is based on the RF Test Report SHEM190601387701. Test Mode Test Channel 11A 11A 11A 11A 11A 11A 11N20 11N20 11N20 11N20 11N20 11N20 11N40 11N40 11N40 11N40 5180 5220 5240 5745 5785 5825 5180 5220 5240 5745 5785 5825 5190 5230 5755 5795 Power
[dBm]
Power
[mW]
NA NA NA NA NA NA 10.33 8.45 8.91 8.18 8.93 8.00 7.64 5.69 8.38 7.18 9.44 6.59 Ant1 Ant2 MIMO Ant1 Ant2 MIMO NA 10.14 9.27 NA 9.13 9.5 9.51 9.03 NA NA 7.55 8.83 NA 8.56 9.23 9.75 8.19 NA 8.35 11.80 8.30 6.84 15.14 9.19 8.51 7.68 11.13 7.10 5.86 12.97 7.58 10.78 6.24 5.73 11.97 7.95 7.62 10.78 6.18 5.78 11.97 7.91 8.36 8.12 11.25 6.85 6.49 13.34 7.42 10.97 6.98 5.52 12.50 8.44 8.26 11.58 7.69 7.69 14.39 8.86 8.41 7.6 11.03 6.93 6.93 12.68 7.27 10.80 6.68 6.68 12.02 8.25 7.61 7.62 10.63 5.77 5.77 11.56 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM190601387702 Page: 7 of 7 5.2 MPE Calculation For FCC:
According to the formula S=P/4R, we can calculate S which is MPE. Note:
1) P (mW) 2) R = distance to the center of radiation of antenna (in meter) = 20cm 3) MPE limit = 1mW/cm For 5G WiFi:
The max. antenna gain is Max. Conducted Power P(mW) 10.33 Gain in Linear Scale G 10.000 10 n Operatio Distance R(cm) 20 In MIMO mode:
The max. antenna gain is 13.01 Operatio Max. Conducted Power P(mW) 15.14 Gain in Linear Scale G 19.999 n Distance R(cm) 20 dBi Power Density
(mW/cm2) 0.02055 dBi Power Density
(mW/cm2) 0.06024 So the device is exclusion from SAR test. Limit
(mW/cm2) Result 1 Pass Limit
(mW/cm2) Result 1 Pass
--End of the Report--
| 1 | Test Report | Test Report | 5.16 MiB | August 08 2019 |
SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Appendix A SHEM190601387701 1.Emission Bandwidth Measurement Test Mode Test Channel 11A 11A 11A 11A 11A 11A 11N20 11N20 11N20 11N20 11N20 11N20 11N40 11N40 11N40 11N40 5180 5220 5240 5745 5785 5825 5180 5220 5240 5745 5785 5825 5190 5230 5755 5795 EBW[MHz]
Ant1 19.48 19.55 19.64 19.96 19.52 19.93 19.87 19.88 19.95 19.87 19.99 19.99 39.75 39.82 39.90 39.83 Ant2 19.43 19.47 19.38 19.45 19.99 19.54 19.92 19.98 19.83 19.64 19.32 19.95 39.63 39.89 39.93 39.66 Limit[MHz]
Verdict
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd.
(26dB)Emission Bandwidth Measurement_11A_5180_Ant1
(26dB)Emission Bandwidth Measurement_11A_5220_Ant1
(26dB)Emission Bandwidth Measurement_11A_5240_Ant1 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd.
(26dB)Emission Bandwidth Measurement_11A_5745_Ant1
(26dB)Emission Bandwidth Measurement_11A_5785_Ant1
(26dB)Emission Bandwidth Measurement_11A_5825_Ant1 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd.
(26dB)Emission Bandwidth Measurement_11N20_5180_Ant1
(26dB)Emission Bandwidth Measurement_11N20_5220_Ant1
(26dB)Emission Bandwidth Measurement_11N20_5240_Ant1 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd.
(26dB)Emission Bandwidth Measurement_11N20_5745_Ant1
(26dB)Emission Bandwidth Measurement_11N20_5785_Ant1
(26dB)Emission Bandwidth Measurement_11N20_5825_Ant1 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd.
(26dB)Emission Bandwidth Measurement_11N40_5190_Ant1
(26dB)Emission Bandwidth Measurement_11N40_5230_Ant1
(26dB)Emission Bandwidth Measurement_11N40_5755_Ant1 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd.
(26dB)Emission Bandwidth Measurement_11N40_5795_Ant1 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd.
(26dB)Emission Bandwidth Measurement_11A_5180_Ant2
(26dB)Emission Bandwidth Measurement_11A_5220_Ant2
(26dB)Emission Bandwidth Measurement_11A_5240_Ant2 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd.
(26dB)Emission Bandwidth Measurement_11A_5745_Ant2
(26dB)Emission Bandwidth Measurement_11A_5785_Ant2
(26dB)Emission Bandwidth Measurement_11A_5825_Ant2 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd.
(26dB)Emission Bandwidth Measurement_11N20_5180_Ant2
(26dB)Emission Bandwidth Measurement_11N20_5220_Ant2
(26dB)Emission Bandwidth Measurement_11N20_5240_Ant2 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd.
(26dB)Emission Bandwidth Measurement_11N20_5745_Ant2
(26dB)Emission Bandwidth Measurement_11N20_5785_Ant2
(26dB)Emission Bandwidth Measurement_11N20_5825_Ant2 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd.
(26dB)Emission Bandwidth Measurement_11N40_5190_Ant2
(26dB)Emission Bandwidth Measurement_11N40_5230_Ant2
(26dB)Emission Bandwidth Measurement_11N40_5755_Ant2 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd.
(26dB)Emission Bandwidth Measurement_11N40_5795_Ant2 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. 2.Minimum Emission Bandwidth Measurement Test Mode Test Channel 11A 11A 11A 11N20 11N20 11N20 11N40 11N40 5745 5785 5825 5745 5785 5825 5755 5795 EBW[MHz]
Ant1 16.28 16.32 16.28 17.25 17.29 17.00 35.41 34.47 Ant2 16.30 13.30 15.77 16.32 16.37 17.02 35.05 33.90 Limit[MHz]
Verdict
---
---
---
---
---
---
---
---
PASS PASS PASS PASS PASS PASS PASS PASS SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd.
(6dB)Minimum Emission Bandwidth Measurement_11A_5745_Ant1
(6dB)Minimum Emission Bandwidth Measurement_11A_5785_Ant1
(6dB)Minimum Emission Bandwidth Measurement_11A_5825_Ant1 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd.
(6dB)Minimum Emission Bandwidth Measurement_11N20_5745_Ant1
(6dB)Minimum Emission Bandwidth Measurement_11N20_5785_Ant1
(6dB)Minimum Emission Bandwidth Measurement_11N20_5825_Ant1 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd.
(6dB)Minimum Emission Bandwidth Measurement_11N40_5755_Ant1
(6dB)Minimum Emission Bandwidth Measurement_11N40_5795_Ant1 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd.
(6dB)Minimum Emission Bandwidth Measurement_11A_5745_Ant2
(6dB)Minimum Emission Bandwidth Measurement_11A_5785_Ant2
(6dB)Minimum Emission Bandwidth Measurement_11A_5825_Ant2 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd.
(6dB)Minimum Emission Bandwidth Measurement_11N20_5745_Ant2
(6dB)Minimum Emission Bandwidth Measurement_11N20_5785_Ant2
(6dB)Minimum Emission Bandwidth Measurement_11N20_5825_Ant2 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd.
(6dB)Minimum Emission Bandwidth Measurement_11N40_5755_Ant2
(6dB)Minimum Emission Bandwidth Measurement_11N40_5795_Ant2 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. 3.Occupied Bandwidth Measurement Test Mode Test Channel 11A 11A 11A 11A 11A 11A 11N20 11N20 11N20 11N20 11N20 11N20 11N40 11N40 11N40 11N40 5180 5220 5240 5745 5785 5825 5180 5220 5240 5745 5785 5825 5190 5230 5755 5795 OBW[MHz]
Ant1 16.56 16.61 16.65 16.91 16.82 16.83 17.66 17.63 17.66 17.77 17.76 17.75 36.10 36.12 36.43 36.30 Ant2 16.58 16.57 16.64 16.91 16.82 16.86 17.64 17.64 17.65 16.83 16.84 17.76 36.16 36.16 36.46 36.33 Limit[MHz]
Verdict
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Occupied Bandwidth Measurement_11A_5180_Ant1 Occupied Bandwidth Measurement_11A_5220_Ant1 Occupied Bandwidth Measurement_11A_5240_Ant1 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Occupied Bandwidth Measurement_11A_5745_Ant1 Occupied Bandwidth Measurement_11A_5785_Ant1 Occupied Bandwidth Measurement_11A_5825_Ant1 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Occupied Bandwidth Measurement_11N20_5180_Ant1 Occupied Bandwidth Measurement_11N20_5220_Ant1 Occupied Bandwidth Measurement_11N20_5240_Ant1 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Occupied Bandwidth Measurement_11N20_5745_Ant1 Occupied Bandwidth Measurement_11N20_5785_Ant1 Occupied Bandwidth Measurement_11N20_5825_Ant1 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Occupied Bandwidth Measurement_11N40_5190_Ant1 Occupied Bandwidth Measurement_11N40_5230_Ant1 Occupied Bandwidth Measurement_11N40_5755_Ant1 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Occupied Bandwidth Measurement_11N40_5795_Ant1 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Occupied Bandwidth Measurement_11A_5180_Ant2 Occupied Bandwidth Measurement_11A_5220_Ant2 Occupied Bandwidth Measurement_11A_5240_Ant2 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Occupied Bandwidth Measurement_11A_5745_Ant2 Occupied Bandwidth Measurement_11A_5785_Ant2 Occupied Bandwidth Measurement_11A_5825_Ant2 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Occupied Bandwidth Measurement_11N20_5180_Ant2 Occupied Bandwidth Measurement_11N20_5220_Ant2 Occupied Bandwidth Measurement_11N20_5240_Ant2 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Occupied Bandwidth Measurement_11N20_5745_Ant2 Occupied Bandwidth Measurement_11N20_5785_Ant2 Occupied Bandwidth Measurement_11N20_5825_Ant2 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Occupied Bandwidth Measurement_11N40_5190_Ant2 Occupied Bandwidth Measurement_11N40_5230_Ant2 Occupied Bandwidth Measurement_11N40_5755_Ant2 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Occupied Bandwidth Measurement_11N40_5795_Ant2 Verdict SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. 4.Maximum Conduct Output Power Test Mode Test Channel Level
[dBm]
10log(1/x) Factor
[dB]
Power
[dBm]
Limit
[dBm]
Ant1 9.86 9.22 9.23 8.55 8.95 9.47 8.88 8.2 7.64 7.6 8.05 8.13 8.25 7.81 7.65 7 Ant2 8.99 8.84 8.75 7.27 8.28 7.91 8.04 7.37 7.27 7.34 7.84 7.11 7.66 7 6.67 7.01 Ant1 0.28 0.28 0.28 0.28 0.28 0.28 0.31 0.31 0.31 0.31 0.31 0.31 0.61 0.60 0.60 0.61 Ant2 0.28 0.29 0.28 0.28 0.28 0.28 0.31 0.31 0.31 0.28 0.28 0.31 0.60 0.60 0.60 0.61 NA NA NA NA NA NA Ant1 Ant2 MIMO Ant1 Ant2 26.00 26.00 PASS 10.14 9.27 26.00 26.00 PASS 9.5 9.13 26.00 26.00 PASS 9.03 9.51 26.00 26.00 PASS 7.55 8.83 26.00 26.00 PASS 9.23 8.56 26.00 26.00 PASS 8.19 9.75 8.35 11.80 23.00 23.00 PASS 9.19 7.68 11.13 23.00 23.00 PASS 8.51 7.58 10.78 23.00 23.00 PASS 7.95 7.62 10.78 23.00 23.00 PASS 7.91 8.12 11.25 23.00 23.00 PASS 8.36 7.42 10.97 23.00 23.00 PASS 8.44 8.26 11.58 23.00 23.00 PASS 8.86 11.03 23.00 23.00 PASS 7.6 8.41 7.27 10.80 23.00 23.00 PASS 8.25 7.62 10.63 23.00 23.00 PASS 7.61 11A 11A 11A 11A 11A 11A 11N20 11N20 11N20 11N20 11N20 11N20 11N40 11N40 11N40 11N40 5180 5220 5240 5745 5785 5825 5180 5220 5240 5745 5785 5825 5190 5230 5755 5795 Remark:
1) Output Average Power = Reading Power + Duty Cycle Correction Factor 2) Per KDB 662911, the conducted powers at Antenna 1 and Antenna 2 were first measured separately during MIMO transmission as shown in section above. The measured values were then summed in linear power units then converted back to dBm. SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Maximum Conduct Output Power_11A_5180_Ant1 Maximum Conduct Output Power_11A_5220_Ant1 Maximum Conduct Output Power_11A_5240_Ant1 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Maximum Conduct Output Power_11A_5745_Ant1 Maximum Conduct Output Power_11A_5785_Ant1 Maximum Conduct Output Power_11A_5825_Ant1 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Maximum Conduct Output Power_11N20_5180_Ant1 Maximum Conduct Output Power_11N20_5220_Ant1 Maximum Conduct Output Power_11N20_5240_Ant1 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Maximum Conduct Output Power_11N20_5745_Ant1 Maximum Conduct Output Power_11N20_5785_Ant1 Maximum Conduct Output Power_11N20_5825_Ant1 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Maximum Conduct Output Power_11N40_5190_Ant1 Maximum Conduct Output Power_11N40_5230_Ant1 Maximum Conduct Output Power_11N40_5755_Ant1 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Maximum Conduct Output Power_11N40_5795_Ant1 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Maximum Conduct Output Power_11A_5180_Ant2 Maximum Conduct Output Power_11A_5220_Ant2 Maximum Conduct Output Power_11A_5240_Ant2 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Maximum Conduct Output Power_11A_5745_Ant2 Maximum Conduct Output Power_11A_5785_Ant2 Maximum Conduct Output Power_11A_5825_Ant2 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Maximum Conduct Output Power_11N20_5180_Ant2 Maximum Conduct Output Power_11N20_5220_Ant2 Maximum Conduct Output Power_11N20_5240_Ant2 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Maximum Conduct Output Power_11N20_5745_Ant2 Maximum Conduct Output Power_11N20_5785_Ant2 Maximum Conduct Output Power_11N20_5825_Ant2 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Maximum Conduct Output Power_11N40_5190_Ant2 Maximum Conduct Output Power_11N40_5230_Ant2 Maximum Conduct Output Power_11N40_5755_Ant2 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Maximum Conduct Output Power_11N40_5795_Ant2 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. 5.Maximum Power Spectral Density Test Mode Test Channel 5180 5220 5240 5180 5220 5240 5190 5230 11A 11A 11A 11N20 11N20 11N20 11N40 11N40 Test Mode Level
[dBm/MHz]
10log(1/x) Factor
[dB]
PSD
[dBm/MHz]
Ant1
-0.39
-1.19
-1.08
-1.47
-2.2
-2.97
-5.47
-5.62 Ant2 Ant1
-1.09 0.28 0.28
-1.45 0.28
-1.59
-2.34 0.31 0.31
-3.13 0.31
-3.48
-5.71 0.61 0.6
-6.63 Ant2 0.28 0.29 0.28 0.31 0.31 0.31 0.6 0.6 Ant1
-0.11
-0.91
-0.8
-1.16
-1.89
-2.66
-4.86
-5.02 Ant2
-0.81
-1.16
-1.31
-2.03
-2.82
-3.17
-5.11
-6.03 MIMO NA NA NA 1.44 0.68 0.10
-1.97
-2.49 Level 10log(1/x) Factor[dB]
10log(500kHz/RBW) Factor [dB]
PSD
[dBm/500kHz]
Limit
[dBm/MHz] Verdict 13.00 13.00 13.00 10.00 10.00 10.00 10.00 10.00 PASS PASS PASS PASS PASS PASS PASS PASS Limit
[dBm/500kHz] Verdict Test Channel 11A 11A 11A 11N20 11N20 11N20 11N40 11N40 5745 5785 5825 5745 5785 5825 5755 5795
[dBm/500kHz]
Ant1 Ant2 Ant1 Ant2 Ant1
-7 2.22 2.22 2.22 2.22 2.22 2.22 2.22 2.22
-8.19 0.28 0.28
-6.44 -6.96 0.28 0.28
-5.75 -7.57 0.28 0.28
-8.08 -8.03 0.31 0.28
-7.42 -7.32 0.31 0.28
-7.57 -8.74 0.31 0.31
-11.45 -12.5 0.6 0.6
-12.01 -11.8 0.61 0.61 Ant2 2.22 2.22 2.22 2.22 2.22 2.22 2.22 2.22 Ant1 Ant2 MIMO
-4.5
-5.69 NA
-3.94 -4.46 NA
-3.25 -5.07 NA
-5.55 -5.53 -2.53
-4.89 -4.82 -1.84
-5.04 -6.21 -2.58
-8.63 -9.68 -6.11
-9.18 -8.97 -6.06 26.00 26.00 26.00 23.00 23.00 23.00 23.00 23.00 PASS PASS PASS PASS PASS PASS PASS PASS SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Maximum Power Spectral Density_TNVN_11A_5180_Ant1 Maximum Power Spectral Density_TNVN_11A_5220_Ant1 Maximum Power Spectral Density_TNVN_11A_5240_Ant1 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Maximum Power Spectral Density_TNVN_11A_5745_Ant1 Maximum Power Spectral Density_TNVN_11A_5785_Ant1 Maximum Power Spectral Density_TNVN_11A_5825_Ant1 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Maximum Power Spectral Density_TNVN_11N20_5180_Ant1 Maximum Power Spectral Density_TNVN_11N20_5220_Ant1 Maximum Power Spectral Density_TNVN_11N20_5240_Ant1 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Maximum Power Spectral Density_TNVN_11N20_5745_Ant1 Maximum Power Spectral Density_TNVN_11N20_5785_Ant1 Maximum Power Spectral Density_TNVN_11N20_5825_Ant1 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Maximum Power Spectral Density_TNVN_11N40_5190_Ant1 Maximum Power Spectral Density_TNVN_11N40_5230_Ant1 Maximum Power Spectral Density_TNVN_11N40_5755_Ant1 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Maximum Power Spectral Density_TNVN_11N40_5795_Ant1 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Maximum Power Spectral Density_TNVN_11A_5180_Ant2 Maximum Power Spectral Density_TNVN_11A_5220_Ant2 Maximum Power Spectral Density_TNVN_11A_5240_Ant2 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Maximum Power Spectral Density_TNVN_11A_5745_Ant2 Maximum Power Spectral Density_TNVN_11A_5785_Ant2 Maximum Power Spectral Density_TNVN_11A_5825_Ant2 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Maximum Power Spectral Density_TNVN_11N20_5180_Ant2 Maximum Power Spectral Density_TNVN_11N20_5220_Ant2 Maximum Power Spectral Density_TNVN_11N20_5240_Ant2 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Maximum Power Spectral Density_TNVN_11N20_5745_Ant2 Maximum Power Spectral Density_TNVN_11N20_5785_Ant2 Maximum Power Spectral Density_TNVN_11N20_5825_Ant2 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Maximum Power Spectral Density_TNVN_11N40_5190_Ant2 Maximum Power Spectral Density_TNVN_11N40_5230_Ant2 Maximum Power Spectral Density_TNVN_11N40_5755_Ant2 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Maximum Power Spectral Density_TNVN_11N40_5795_Ant2 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Limit
(GHz) Result Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass 5.15-
5.25 6. Frequency Stability Test Conditions Band Volt (V AC) Normal(120) Extreme(85) Extreme(276) Band U-NII 1 Normal(120) Extreme(85) Extreme(276) Operation Frequency
(MHz) 5180 5240 Temp () Extreme(-20) Extreme(-10) Extreme(0) Extreme(+10) Extreme(+20) Extreme(+30) Extreme(+40) Extreme(+55) Norma(+20) Extreme(-20) Extreme(-10) Extreme(0) Extreme(+10) Extreme(+20) Extreme(+30) Extreme(+40) Extreme(+55) Norma(20) Test Frequency (MHz) ANT1 ANT2 Freq. Dev. (MHz) ANT1 ANT2 5180.0241 5180.0243 0.0241 0.0243 5180.0256 5180.0312 0.0256 0.0312 5180.0305 5180.0254 0.0305 0.0254 5180.0328 5180.0246 0.0328 0.0246 5180.0331 5180.0263 0.0331 0.0263 5180.0327 5180.0199 0.0327 0.0199 5180.0255 5180.0264 0.0255 0.0264 5180.0421 5180.0215 0.0421 0.0215 5180.0124 5180.0443 0.0124 0.0443 5180.0363 5180.0157 0.0363 0.0157 5240.0270 5240.0401 0.0270 0.0401 5240.0252 5240.0255 0.0252 0.0255 5240.0334 5240.0345 0.0334 0.0345 5240.0371 5240.0382 0.0371 0.0382 5240.0423 5240.0443 0.0423 0.0443 5240.0232 5240.0255 0.0232 0.0255 5240.0245 5240.0268 0.0245 0.0268 5240.0375 5240.0394 0.0375 0.0394 5240.0411 5240.0426 0.0411 0.0426 5240.0353 5240.0387 0.0353 0.0387 Test Frequency (MHz) Freq. Dev. (MHz) ANT2 ANT1 ANT2 ANT1 5745.0411 5745.0435 0.0411 0.0435 5745.0402 5745.0441 0.0402 0.0441 5745.0325 5745.0355 0.0325 0.0355 5745.0312 5745.0346 0.0312 0.0346 5745.0384 5745.0395 0.0384 0.0395 5745.0421 5745.0452 0.0421 0.0452 5745.0357 5745.0396 0.0357 0.0396 5745.0393 5745.0375 0.0393 0.0375 5745.0421 5745.0424 0.0421 0.0424 5745.0432 5745.0481 0.0432 0.0481 5825.0403 5825.0435 0.0403 0.0435 5825.0431 5825.0487 0.0431 0.0487 5825.0365 5825.0385 0.0365 0.0385 5825.0302 5825.0344 0.0302 0.0344 5825.0296 5825.0302 0.0296 0.0302 5825.0341 5825.0384 0.0341 0.0384 5825.0315 5825.0364 0.0315 0.0364 5825.0326 5825.0376 0.0326 0.0376 5825.0414 5825.0435 0.0414 0.0435 5825.0352 5825.0384 0.0352 0.0384 Operation Frequency Test Conditions Band U-NII 3 Band 5745
(MHz) Volt (V AC) Norma(+20) Normal(120) Extreme(85) Extreme(276) Temp () Extreme(-20) Extreme(-10) Extreme(0) Extreme(+10) Extreme(+20) Extreme(+30) Extreme(+40) Extreme(+55) Limit
(GHz) Result Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Remark: Based on the results of the frequency stability test shown above the frequency deviation results measured are very small. As such it is determined that the channels at the band edge would remain in-band when the maximum measured frequency deviation noted during the frequency stability tests is applied. Therefore the device is determined to remain operating in band over the temperature and voltage range as tested. Extreme(-20) Extreme(-10) Extreme(0) Extreme(+10) Extreme(+20) Extreme(+30) Extreme(+40) Extreme(+55) Extreme(85) Extreme(276) Normal(120) 5.725-
5.85 Norma(20) 5825 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. 7.Duty Cycle Test Mode Test Channel 11A 11A 11A 11A 11A 11A 11N20 11N20 11N20 11N20 11N20 11N20 11N40 11N40 11N40 11N40 5180 5220 5240 5745 5785 5825 5180 5220 5240 5745 5785 5825 5190 5230 5755 5795 Duty Cycle[%]
Ant1 93.66 93.66 93.66 93.66 93.66 93.66 93.21 93.13 93.21 93.21 93.21 93.21 86.99 87.13 87.13 86.99 Ant2 93.66 93.59 93.66 93.66 93.66 93.66 93.21 93.21 93.13 93.66 93.66 93.21 87.15 87.13 87.15 86.99 10log(1/x) Factor[dB]
Ant1 0.28 0.28 0.28 0.28 0.28 0.28 0.31 0.31 0.31 0.31 0.31 0.31 0.61 0.60 0.60 0.61 Ant2 0.28 0.29 0.28 0.28 0.28 0.28 0.31 0.31 0.31 0.28 0.28 0.31 0.60 0.60 0.60 0.61 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Duty Cycle_11A_5180_Ant1 Duty Cycle_11A_5220_Ant1 Duty Cycle_11A_5240_Ant1 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Duty Cycle_11A_5745_Ant1 Duty Cycle_11A_5785_Ant1 Duty Cycle_11A_5825_Ant1 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Duty Cycle_11N20_5180_Ant1 Duty Cycle_11N20_5220_Ant1 Duty Cycle_11N20_5240_Ant1 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Duty Cycle_11N20_5745_Ant1 Duty Cycle_11N20_5785_Ant1 Duty Cycle_11N20_5825_Ant1 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Duty Cycle_11N40_5190_Ant1 Duty Cycle_11N40_5230_Ant1 Duty Cycle_11N40_5755_Ant1 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Duty Cycle_11N40_5795_Ant1 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Duty Cycle_11A_5180_Ant2 Duty Cycle_11A_5220_Ant2 Duty Cycle_11A_5240_Ant2 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Duty Cycle_11A_5745_Ant2 Duty Cycle_11A_5785_Ant2 Duty Cycle_11A_5825_Ant2 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Duty Cycle_11N20_5180_Ant2 Duty Cycle_11N20_5220_Ant2 Duty Cycle_11N20_5240_Ant2 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Duty Cycle_11N20_5745_Ant2 Duty Cycle_11N20_5785_Ant2 Duty Cycle_11N20_5825_Ant2 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Duty Cycle_11N40_5190_Ant2 Duty Cycle_11N40_5230_Ant2 Duty Cycle_11N40_5755_Ant2 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Duty Cycle_11N40_5795_Ant2
| 1 | Test Setup Photo | Test Setup Photos | 415.82 KiB | August 08 2019 |
SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 1 of 5 Test Setup Photos-FCC Hangzhou Hikvision Digital Technology Co., Ltd. No. 555 Qianmo Road, Binjiang District, Hangzhou 310052, China Applicant:
Address of Applicant:
Equipment Under Test (EUT):
Product Name:
Model No.:
Wireless Bridge DS-3WF02C-5N/O Page 1 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 2 of 5 1 Contents Page 1 CONTENTS............................................................................................................... 2 2 EQUIPMENT UNDER TEST PICTURES ............................................................ 3 2.1 Conducted Emission Test Setup ....................................................................... 3 2.2 Radiated Emission Test Setup .......................................................................... 3 2.3 RF Conducted Test Setup ................................................................................. 5 Page 2 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 3 of 5 2 EQUIPMENT UNDER TEST PICTURES 2.1 Conducted Emission Test Setup 2.2 Radiated Emission Test Setup 30MHz to 1GHz Page 3 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 4 of 5 Above 1GHz Page 4 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 5 of 5 Zoom:
2.3 RF Conducted Test Setup End Page 5 of 5
| frequency | equipment class | purpose | ||
|---|---|---|---|---|
| 1 | 2019-08-08 | 5180 ~ 5240 | NII - Unlicensed National Information Infrastructure TX | Original Equipment |
| app s | Applicant Information | |||||
|---|---|---|---|---|---|---|
| 1 | Effective |
2019-08-08
|
||||
| 1 | Applicant's complete, legal business name |
Hangzhou Hikvision Digital Technology Co., Ltd.
|
||||
| 1 | FCC Registration Number (FRN) |
0024149825
|
||||
| 1 | Physical Address |
No. 555 Qianmo Road, Binjiang District
|
||||
| 1 |
Hangzhou, N/A
|
|||||
| 1 |
China
|
|||||
| app s | TCB Information | |||||
| 1 | TCB Application Email Address |
u******@sgs.com
|
||||
| 1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
| app s | FCC ID | |||||
| 1 | Grantee Code |
2ADTD
|
||||
| 1 | Equipment Product Code |
T02C5N0O
|
||||
| app s | Person at the applicant's address to receive grant or for contact | |||||
| 1 | Name |
X******** Z****
|
||||
| 1 | Telephone Number |
+86-5********
|
||||
| 1 | Fax Number |
+86-5********
|
||||
| 1 |
z******@hikvision.com
|
|||||
| app s | Technical Contact | |||||
| 1 | Firm Name |
SGS-CSTC Standards Technical Services Co., Ltd.
|
||||
| 1 | Name |
P******** Z******
|
||||
| 1 | Physical Address |
588 West Jindu Road, Xinqiao, Songjiang
|
||||
| 1 |
ShangHai, 201612
|
|||||
| 1 |
China
|
|||||
| 1 | Telephone Number |
86 21********
|
||||
| 1 | Fax Number |
86 21********
|
||||
| 1 |
P******@sgs.com
|
|||||
| app s | Non Technical Contact | |||||
| n/a | ||||||
| app s | Confidentiality (long or short term) | |||||
| 1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
| if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
| app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
| 1 | Is this application for software defined/cognitive radio authorization? | No | ||||
| 1 | Equipment Class | NII - Unlicensed National Information Infrastructure TX | ||||
| 1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wireless Bridge | ||||
| 1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
| 1 | Modular Equipment Type | Does not apply | ||||
| 1 | Purpose / Application is for | Original Equipment | ||||
| 1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
| 1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
| 1 | Grant Comments | Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40MHz bandwidth mode. | ||||
| 1 | Is there an equipment authorization waiver associated with this application? | No | ||||
| 1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
| app s | Test Firm Name and Contact Information | |||||
| 1 | Firm Name |
SGS-CSTC Standards Technical Services Co.,Ltd.
|
||||
| 1 | Name |
L******** Y****
|
||||
| 1 | Telephone Number |
+86 (********
|
||||
| 1 |
l******@sgs.com
|
|||||
| Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 1 | 1 | 15E | MO | 5180 | 5240 | 0.015 | |||||||||||||||||||||||||||||||||||
| 1 | 2 | 15E | MO | 5190 | 5230 | 0.014 | |||||||||||||||||||||||||||||||||||
| 1 | 3 | 15E | MO | 5745 | 5825 | 0.013 | |||||||||||||||||||||||||||||||||||
| 1 | 4 | 15E | MO | 5755 | 5795 | 0.012 | |||||||||||||||||||||||||||||||||||
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC