DS-PK1-E-WB Wireless LED Keypad 2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to rmware updates or other reasons. Please nd the latest version of this Manual at the Hikvision website (https://www.hikvision.com/). Please use this Manual with the guidance and assistance of professionals trained in supporting the Product. and other Hikvision's trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned are the properties of their respective owners. Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED AS IS AND WITH ALL FAULTS AND ERRORS. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS. This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, RE Directive 2014/53/EU, the RoHS Directive 2011/65/EU. 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see:
www.recyclethis.info replacement of a battery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium battery types);
disposal of a battery into re or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of ammable liquid or gas; and a battery subjected to extremely low air pressure that may result in an explosion or the leakage of ammable liquid or gas 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specic battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium
(Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see:www.recyclethis.info Warning This is a class A product. In a domestic environment this product may cause radio inter-ference in which case the user may be required to take adequate measures. FCC Information Please take attention that changes or modication not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body. FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation Warning 1. Do not ingest battery, Chemical Burn Hazard 2. Keep new and used batteries away from the children. 3. If the battery compartment does not close securetyly, stop using the product and keep it away from children. 4. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. Caution 1. Risk of re or explosion if the battery is replaced by an incorrect type. 2. Improper replacement of the battery with an incorrect type may defeat a safeguard (for example, in the case of some lithium battery types). 3. Do not dispose of the battery into re or a hot oven, or mechanically crush or cut the battery, which may result in an explosion. 4. Do not leave the battery in an extremely high temperature surrounding environment, which may result in an explosion or the leakage of ammable liquid or gas. 5. Do not subject the battery to extremely low air pressure, which may result in an explosion or the leakage of ammable liquid or gas. 6. Dispose of used batteries according to the instructions 1 Appearance Fault Enrollment/Signal Strength Armed/Disarmed Alarm Fire Alarm Panic Alarm Medical Alarm CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. REPLACEMENT OF A BATTERY WITH AN INCORRECT TYPE THAT CAN DEFEAT A SAFEGUARD. CAUTION CHEMICAL BURNING DANGER DO NOT SWALLOW THE BATTERY KEEP NEW AND USED BATTERIES AWAY FROM THE CHILDREN. IF YOU THINK BATTERIES MIGHT HAVE BEEN SWALLOWED OR PLACED INSIDE ANY PART OF THE BODY, SEEK IMMEDIATE MEDICAL ATTENTION. CAUTION DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUC-
TIONS AND LOCAL REGULATION. Relay Control Disarm Away Arm Stay Arm Tamper Switch Power Switch Serial Port CAUTION WHILE REPLACE THE BATTERIES, REPLACE ALL FOUR BATTERIES AT THE SAME TIME, AND DO NOT MIX OLD AND NEW BATTERIES. Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China 2 Indication LED Indication Description Wake up with Fault Solid orange for 10 s . No Fault O Tampering Alarm Solid red Event Alarm Flashing red No Alarm O Note: Event Alarm Priority > Tampering Alarm Priority Armed Solid blue for 5 s Wake up while armed Solid blue for 10 s Arming Failed Disarmed Disarming Failed Blue turns O Green ashes 2 times Green turns O Enrollment Flashing red and green: Enrolling Green ashes 7 times: Enrolled Signal Strength Find Me Continual green (3 s) and o (3 s): Strong Continual green and red (3 s) and o (3 s): Medium Continual Red (3 s) and o (3 s): Weak Continual ashing red (3 s) and o (3 s): Lost Flashing red: Operating Turns o when over time (3 min) or control panel power o Power On Enrolled: Solid green for 1 s: Powered on Back Light
-The back light is on by default, you can set the On/O schedule on the web client of the control panel. Refer to the user manual of control panel for details.
-It turns o when there is no key operation for more than 10 s.
-If the keypad is not enrolled to the control panel, the back light is o. Buzzer Description Operation completed: Beep twice Operation failed: Beep three times 3 Enrollment 1. Remove the screw on the bottom of the keypad. 2. Disassemble the keypad and remove the rear panel. 3. Power on the security control panel. 4. Log in the APP and tap the icon "+" . Scan the QR code or input the control panel serial No. to add the control panel. 5. Enroll the peripheral locally, with OR code, or with serial No.. Enroll the Peripheral Locally 1. In the APP, tap the "Enrollment Mode" button on the control panel page to make the control panel enter the enroll-
ment status. 2. Push the power switch of the peripheral to on, and it will be automatically enrolled to the control panel. Enroll the Peripheral with QR Code or Serial No. 1. In the APP, tap the icon "+"and scan the QR code or enter the serial No. on the peripheral. 2. Push the power switch of the peripheral to on, and it will be automatically enrolled to the control panel. Remove the screw on the bottom of the keypad. Disassemble the keypad and remove the rear panel. Scan the QR code on the rear panel of the keypad. Push the power switch to ON. 4 Installation Note: The additional force shall be equal to three times the weight of the equipment but not less than 50N. The equipment and its associated mounting means shall remain secure during the installation. After the installation, the equipment, including any associated mounting plate, shall not be damaged. Check signal strength and select installation place Enter the signal checking mode by operating on the control panel. Continual green (3 s) and o (3 s): Strong Continual green and red (3 s) and o (3 s): Medium Continual Red (3 s) and o (3 s): Weak Continual ashing red (3 s) and o (3 s): Lost 2 Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China 8 Operation 5 Keypad Status Working Status Sleep Status Enrollment Status Free Status The keypad will enter the sleep status while meeting the following conditions:
RF data transmission key operation keypad tampering alarm polling Beeping LED indication The keypad will enter the sleep status while meeting the following conditions:
No RF data transmission No key operation for more than 10 s No keypad tampering alarm No polling No beeping No LED indication While the keypad is enrolled to a control panel, it enters the enrollment status. Only if the keypad is enrolled, the key operation and status indication take There is no area related to the keypad. eects. The key and back light do not works. Operation Interval The interval between the operations (successful or failed) should be more than 3 s. The continuous operation of the key should be in 10 s. Keypad Lock The Key pad will be locked after 3 to 5 failure authentication attempts.You can set the lock time on the web client of the control panel Arming Process Pre-delay Indication:
The fault LED turns solid orange Fault Checking Indication:
The fault LED turns ashing orange Conrm the operation by press the Arm key Exit Delay Indication:
Arming LED turns ashing blue, and the buzzer indicates exit delay. The Key pad will be locked after 3 to 5 failure authentication attempts.You can set the lock time on the web client of the control panel Arm Directly Press the Arm key to arm the device. Indication:
Armed: arming LED solid blue for 5 s. Buzzer beeps twice. Arming failed: Buzzer beeps three time. Disarm Press the Disarm key to disarm the device. Indication:
Armed: Buzzer beeps twice. Arming failed: Buzzer beeps three time. No Instant Operation The count down is nished. Indication:
Armed: arming LED solid blue for 5 s. Buzzer beeps twice. Arming failed: Buzzer beeps three time. Formatting 1. Power the keypad o. 2. Hold the tamper switch and meanwhile power the keypad on. The formatting completes while the red LED ashes 3 times. Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China 3 CAUTION IF THE BATTERY COMPARTMENT DOES NOT CLOSE SECURELY, STOP USING THE PRODUCT AND KEEP IT AWAY FROM CHILDREN. 1. Secure the rear panel on the wall with four supplied screws. 2. Attach the front panel onto the rear panel. 3. Tighten the screw on the bottom to complete the installation. 6 Command The keypad command is shown as follows. Events Codes Away arming for all areas:
User password + Away Notes Away arm Away arming for specied area:
User password + # + Area No.(1,2.3.4.5.6.7.8.9.010.011.012....)
+ away
-The keypad does not display area No. greater than 9.
-If the area No. is greater than 9, enter " 0XX"for the No.."0"indicates tens digits, and "XX"indicates the actual area No.
-If the selected area is not related to the keypad,the back light of 0 will Stay arming for all areas:
User password + Stay Disarming for all areas:
User password + Disarm Stay arm Disarm Stay arming for specied area:
User password + # + Area No.(1,2.3.4.5.6.7.8.9.010.011.012....)
+ Stay
-The keypad does not display area No. greater than 9.
-If the area No. is greater than 9, enter " 0XX"for the No.."0"indicates tens digits, and "XX"indicates the actual area No.
-If the selected area is not related to the keypad, the back light of 0 will ashes three times. Disarming for specied area:
User password + # + Area No.(1,2.3.4.5.6.7.8.9.010.011.012....)
+ Disarm
-The keypad does not display area No. greater than 9.
-If the area No. is greater than 9, enter " 0XX"for the No.."0"indicates tens digits, and "XX"indicates the actual area No.
-If the selected area is not related to the keypad, the back light of 0 will ashes three times. Clear alarm Fire PA Medical User Password+Hold Disarm Hold "1/Fire Alarm" for 3 s Hold "2/Panic Alarm" for 3 s Hold "3/Medical" for 3 s Duress
(Duress Code)+disarm The Buzzer will beep three times for failure operation. The Buzzer will beep three times for failure operation. The Buzzer will beep three times for failure operation. You can set the duress code on the web client of the control panel. Refer to the user manual of control panel for details. Output User Password+Output+relay No.(1,2.3.4.5.6.7.8.9.010.011.012....)+
-If the relay No. is greater than 9, enter " 0XX" for the No.."0"indicates tens digits, and "XX"indicates the actual relay No.
- A successful command execution implement an operation "O" or "On". Delete Digit
Delete the Digit of user password 4 Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China 7 Specication RF Interface Display Key Speed Frequency Method Distance Tamper switch Wireless module Power switch Buzzer Indicator Backlight Number key Function key Wireless Keypad 42Kbps 433.10MHz 2GFSK 900m (open area) 1, front and rear panel tamper-proof For wireless communication Power on/o 1 4: fault (orange), enrollment/signal (red/green), arming(red/green/blue), and alarm (red) white 10: 0 to 9 5: *, #, stay arming, away arming, disarming, and output 10 to 90
-10 C to 55 C (14 F to 131 F) White Screw mounting 1.5 VDC, four AA baterries(included), standby time more than two years 151 g, and 23 g each battery Operation Environment Appearance Installation Humidity Temperature Color Dimension(W x H x D) 140mm x 86mm x 22 mm Installation Power Supply Power supply Weight Weight without batteries